December 2010 Doc ID 7928 Rev 6 1/11
11
STX13003
High voltage fast-switching NPN power transistor
Features
■High voltage capability
■Very high switching speed
Applications
■Compact fluorescent lamps (CFLs)
■SMPS for battery charger
Description
The device is manufactured using high voltage
multi epitaxial planar technology for high switching
speeds and high voltage capability. It uses a
cellular emitter structure with planar edge
termination to enhance switching speeds while
maintaining the wide RBSOA.
Figure 1. Internal schematic diagram
TO-92 TO-92AP
Table 1. Device summary (1)
Order codes Marking Package Packaging
STX13003 X13003 TO-92 Bag
STX13003G X13003G TO-92 Bag
STX13003-AP X13003 TO-92AP Ammopack
STX13003G-AP X13003G TO-92AP Ammopack
1. The letter "G" in the order code suffix identifies the product as ECOPACK®2 grade. Please see Section 3 for details.
www.st.com
Electrical ratings STX13003
2/11 Doc ID 7928 Rev 6
1 Electrical ratings
Table 2. Absolute maximum ratings
Symbol Parameter Value Unit
VCES Collector-emitter voltage (VBE = 0) 700 V
VCEO Collector-emitter voltage (IB = 0) 400 V
VEBO Emitter-base voltage (IC = 0, IB = 0.5 A, tP < 10 ms) V(BR)EBO V
ICCollector current 1 A
ICM Collector peak current (tP < 5 ms) 3 A
IBBase current 0.5 A
IBM Base peak current (tP < 5 ms) 1.5 A
PTOT Total dissipation at Tc = 25 °C 1.5 W
Tstg Storage temperature -65 to 150 °C
TJMax. operating junction temperature 150
Table 3. Thermal data
Symbol Parameter Value Unit
RthJC Thermal resistance junction-case__________max 83 °C/W
STX13003 Electrical characteristics
Doc ID 7928 Rev 6 3/11
2 Electrical characteristics
Tcase = 25 °C unless otherwise specified.
Table 4. Electrical characteristics
Symbol Parameter Test conditions Min. Typ. Max. Unit
ICES
Collector cut-off current
(VBE = 0)
VCE = 700 V
VCE = 700 V TC = 125 °C
1
5
mA
mA
V(BR)EBO
Emitter-base breakdown
voltage (IC = 0) IE = 10 mA 9 18 V
VCEO(sus)(1)
1. Pulse test: pulse duration ≤ 300 µs, duty cycle ≤ 2 %.
Collector-emitter
sustaining voltage (IB = 0) IC = 10 mA 400 V
VCE(sat) (1) Collector-emitter
saturation voltage
IC = 0.5 A IB = 100 mA
IC = 1 A IB = 250 mA
IC = 1.5 A IB = 500 mA
0.5
1
1.5
V
V
V
VBE(sat) (1) Base-emitter saturation
voltage
IC = 0.5 A IB = 100 mA
IC = 1 A IB = 250 mA
1
1.2
V
V
hFE DC current gain IC = 0.5 A VCE = 2 V
IC = 1 A VCE = 2 V
8
5
25
25
tr
ts
tf
Resistive load
Rise time
Storage time
Fall time
IC = 1 A ___ _ tp = 25 µs
IB1 = -IB2 = 200 mA
VCC = 125 V Figure 12
1
4
0.7
µs
µs
µs
ts
Inductive Load
Storage time
IC = 1 A Vclamp = 300 V
IB1 = 200 mA VBE(off) = -5 V
L = 50 mH RBB = 0
Figure 13
0.8 µs
Electrical characteristics STX13003
4/11 Doc ID 7928 Rev 6
2.1 Electrical characteristics (curves)
Figure 2. Safe operating area Figure 3. Derating curve
Figure 4. Output characteristics Figure 5. Reverse biased safe
operating area
Figure 6. DC current gain (VCE = 1 V) Figure 7. DC current gain (VCE = 5 V)
STX13003 Electrical characteristics
Doc ID 7928 Rev 6 5/11
2.2 Test circuits
Figure 12. Resistive load switching test circuit
1. Fast electronic switch
2. Non-inductive resistor
Figure 8. Collector-emitter saturation
voltage
Figure 9. Base-emitter saturation
voltage
Figure 10. Inductive load switching time Figure 11. Resistive load switching time
Electrical characteristics STX13003
6/11 Doc ID 7928 Rev 6
Figure 13. Inductive load switching test circuit
1. Fast electronic switch
2. Non-inductive resistor
3. Fast recovery rectifier
STX13003 Package mechanical data
Doc ID 7928 Rev 6 7/11
3 Package mechanical data
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
Package mechanical data STX13003
8/11 Doc ID 7928 Rev 6
Figure 14. TO-92 drawing
Table 5. TO-92 mechanical data
Dim.
mm.
Min. Typ. Max.
A 4.32 4.95
b 0.36 0.51
D 4.45 4.95
E 3.30 3.94
e 2.41 2.67
e1 1.14 1.40
L 12.70 15.49
R 2.16 2.41
S1 0.92 1.52
W 0.41 0.56
V5°
0102782 D
STX13003 Package mechanical data
Doc ID 7928 Rev 6 9/11
Dim. mm
Min Typ Max
A1 4.80
T3.80
T1 1.60
T2 2.30
d0.48
P0 12.50 12.70 12.90
P2 5.65 6.35 7.05
F1,F2 2.44 2.54 2.94
F34.985.085.48
delta H -2.00 2.00
W17.50 18.00 19.00
W0 5.70 6.00 6.30
W1 8.50 9.00 9.25
W2 0.50
H18.50 20.50
H30.5 1 1.5
H0 15.50 16.00 16.50
H1 25.00
D0 3.80 4.00 4.20
t0.90
L11.00
I1 3.00
delta P -1.00 1.00
TO-92 ammopack shipment (suffix”-AP”) mechanical data
0050910S
STX13003
Doc ID 7928 Rev 6 11/11
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2010 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
