RT424024 - TE CONNECTIVITY - Datasheet.Directory

12-2020, Rev. 1220

www.te.com

a TE Connectivity Ltd. company.

Catalog and product speciﬁcation according

to IEC 61810-1 and to be used only together

with the ‘Deﬁnitions’ section.

Catalog and product data is subject to the

terms of the disclaimer and all chapters of

the ‘Deﬁnitions’ section, available at

http://relays.te.com/definitions

Catalog product data, ‘Deﬁnitions’ section,

application notes and all speciﬁcations are

subject to change.

SCHRACK

General Purpose

Low Power PCB Relays

n 2 pole 8A, 2 form C (CO) or 2 form A (NO) contacts

n Sensitive coil 400mW

n 5kV/10mm coil-contact, reinforced insulation

n Ambient temperature 85°C

n WG version: product in accordance to IEC60335-1

Typical applications

Boiler control, timers, garage door control, POS automation, interface

modules.

Approvals

VDE Cert. No. 40007571, UL E214025, cCSAus 1142018,

CQC 20002275223, CQC 08001027262

Technical data of approved types on request.

Contact Data

Contact arrangement 2 form C (CO) or 2 form A (NO)

Rated voltage 250VAC

Max. switching voltage 400VAC

Rated current 8A, UL: 10A

Limiting continuous current 8A, UL: 10A

Limiting making current, max. 4s, duty factor 10% 15A

Breaking capacity max. 2000VA

Contact material AgNi 90/10

Frequency of operation, with/without load 360/72000h-1

Operate/release time max., DC coil 8/6ms

Bounce time max., DC coil, form A/form B 4/10ms

Contact ratings

Type Contact Load Cycles

IEC 61810

RT424 DC coil C (CO) 8A, 250VAC, cosφ=1, 85°C 10x103

RT444 AC coil A (NO) 8A, 250VAC, cosφ=1, 70°C 50x103

RT424 AC coil C (CO) 8A, 250VAC, cosφ=1, 70°C 30x103

UL 508

RT424 DC coil A/B (NO/NC) 10A, 250VAC, gen. purpose, 85°C 20x103

RT424 DC coil A/B (NO/NC) 1/2hp, 240VAC, 85°C 1x103

RT424 DC coil A/B (NO/NC) Pilot duty, B300, R300, 85°C 6x103

EN60947-5-1

RTE24 DC coil A/B (NO/NC) AC15, 250VAC, 3A 6.050

RTE24 DC coil A/B (NO/NC) DC13, 24VDC, 2A 6.050

RTE24 DC coil A/B (NO/NC) DC13, 250VDC, 0.2A 6.050

EN60730-1

RT424 DC coil A/B (NO/NC) 6(2)A, 250VAC, 85°C 100x103

Mechanical endurance >30x106 operations

Coil Data

Coil voltage range 5 to 110VDC

Operative range, IEC 61810 2

Coil insulation system according UL class F

Coil versions, DC coil

Coil Rated Operate Release Coil Rated coil

code voltage voltage voltage resistance power

VDC VDC VDC Ω±10% mW

005 5 3.5 0.5 62 403

006 6 4.2 0.6 90 400

009 9 6.3 0.9 200 400

012 12 8.4 1.2 360 400

024 24 16.8 2.4 1440 400

048 48 33.6 4.8 5520 417

060 60 42.0 6.0 8570 1) 420

110 110 77.0 11.0 28800 1) 420

1) Coil resistance ±12%. All ﬁgures are given for coil without pre-energization, at ambient

temperature +23°C. Other coil voltages on request.

Insulation Data

Insulation resistance 1000MΩ (at 500VDC)

Initial dielectric strength

between open contacts 1000Vrms

between contact and coil 5000Vrms

between adjacent contacts 2500Vrms

Clearance/creepage

between contact and coil ≥ 10/10mm

between adjacent contacts ≥ 3/4mm

Material group of insulation parts IIIa

Tracking index of relay base PTI 250V

Power PCB Relay RT2 DC and AC (for Asia/Paciﬁc markets)

12-2020, Rev. 1220

www.te.com

a TE Connectivity Ltd. company.

Catalog and product speciﬁcation according

to IEC 61810-1 and to be used only together

with the ‘Deﬁnitions’ section.

Catalog and product data is subject to the

terms of the disclaimer and all chapters of

the ‘Deﬁnitions’ section, available at

http://relays.te.com/definitions

Catalog product data, ‘Deﬁnitions’ section,

application notes and all speciﬁcations are

subject to change.

SCHRACK

General Purpose

Low Power PCB Relays

Power PCB Relay RT2 DC and AC (for Asia/Paciﬁc markets) (Continued)

Other Data

Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content

refer to the Product Compliance Support Center at

www.te.com/customersupport/rohssupportcenter

Resistance to heat and ﬁre

WG version according EN60335, par30

Ambient temperature -40 to 85°C

Category of environmental protection

IEC 61810 RTII - ﬂux proof, RTIII - wash tight

Vibration resistance (functional)

form A/form B contact, 30 to 300Hz 20g/5g

Shock resistance (destructive) 100g

Terminal type PCB-THT, plug-in

Weight 13g

Resistance to soldering heat THT, IEC 60068-2-20

RTII 270°C/10s

RTIII 260°C/5s

Packaging/unit tube/20pcs., box/500pcs.

Accessories

For details see datasheet

Accessories Industrial Power Relay RT

NOTE: indicated contact ratings and electrical endurance data for direct

wiring of relays (according IEC 61810-1); for relays mounted on sockets

deratings may apply.

PCB layout / terminal assignment

Bottom view on solder pins

2 form C (CO) contacts

2 form A (NO) contacts

*) With the recommended PCB hole sizes a grid

pattern from 2.5 mm to 2.54 mm can be used.

Outline Dimensions

Note:

In case of no tolerance shown in outline dimension: outline dimension ≤1mm, tolerance

should be ±0.2mm; outline dimension >1mm and ≤5mm , tolerance should be ±0.3mm;

outline dimension >5mm , tolerance should be ±0.4mm;

12-2020, Rev. 1220

www.te.com

a TE Connectivity Ltd. company.

Catalog and product speciﬁcation according

to IEC 61810-1 and to be used only together

with the ‘Deﬁnitions’ section.

Catalog and product data is subject to the

terms of the disclaimer and all chapters of

the ‘Deﬁnitions’ section, available at

http://relays.te.com/definitions

Catalog product data, ‘Deﬁnitions’ section,

application notes and all speciﬁcations are

subject to change.

SCHRACK

General Purpose

Low Power PCB Relays

Power PCB Relay RT2 DC and AC (for Asia/Paciﬁc markets) (Continued)

Product code structure Typical product code RT 4 2 4 024

Type

RT Power PCB Relay RT2

Version

4 8A, pinning 5mm, ﬂux proof

E 8A, pinning 5mm, wash tight (not for Reﬂow version)

Contact arrangement

2 2 form C (CO) contacts

4 2 form A (NO) contacts

Contact material

3 AgSnO

4 AgNi 90/10

5 AgNi 90/10 gold plated

Coil

Coil code: please refer to coil versions table

Version

Blank Standard version

WG Product in accordance with IEC 60335-1 (domestic appliances)

R Reﬂow solderable

Product code Version Contact Contact Material Coil Version Part number

RT424005 8A, 2 form C (CO) AgNi 90/10 5VDC standard 1-1649329-0

RT424006 pinning 5 mm, contacts 6VDC 1-1649329-1

RT424009 ﬂux proof 9VDC 1-1649329-2

RT424012 12VDC 1-1649329-3

RT424012WG 12VDC IEC 60335-1 compliant 8-1833003-5

RT424024 24VDC standard 1-1649329-5

RT424048 48VDC 1-1649329-6

RT424060 60VDC 1-1649329-7

RT424110 110VDC 1-1649329-8

RT425005 AgNi 90/10 5VDC 4-1649329-6

RT425012 gold plated 12VDC 4-1649329-9

RT425024 24VDC 5-1649329-1

RT444012 2 form A (NO) AgNi 90/10 12VDC 3-1649329-1

RT444024 contacts 24VDC 3-1649329-3

RTE24005 8A, 2 form C (CO) 5VDC 1649329-1

RTE24006 pinning 5 mm, contacts 6VDC 1649329-2

RTE24012 wash tight 12VDC 1649329-4

RTE24024 24VDC 1649329-6

RTE24048 48VDC 1649329-7

RTE24060 60VDC 1649329-8

RTE24110 110VDC 1649329-9

RTE25005 AgNi 90/10 5VDC 3-1649329-7

RTE25012 gold plated 12VDC 4-1649329-0

RTE25024 24VDC 4-1649329-2

RTE44009 2 form A (NO) AgNi 90/10 9VDC 2-1649329-1

RTE44012 contacts 12VDC 2-1649329-2

RTE44024 24VDC 2-1649329-4

RTE44048 48VDC 2-1649329-5