1-121
FOR FURTHER TECHNICAL
DETAILS ON THIS
PRODUCT REQUEST
CATALOGUE REFERENCE
E210-B
LINEAR ACTUATOR: COMPACT CYLINDER
SERIES CQ2(UPTOØ100MM)
Actuators
Castle Hill NSW.............Tel: (02) 680 3222.....Fax: (02) 894 5719
ORDER LINES
Tel: 01-501822 Fax: 01-502710
ORDER LINES
SEE INSIDE FRONT COVER FOR
DETAILS OF YOUR LOCAL SALES OFFICE
V
COMPACT CYLINDER SERIES CQ2
Ø12, 16, 20, 25, 32, 40, 50, 63, 80, 100MM
Unique range of products and sizes
Compact, light weight, space-saving design
Magnetic option
Single or double acting
Non-rotating piston rod option
Bore Sizes: Ø12 - 160mm*
Rubber cushion option
Unique NPL figure-8 seal
* See also CQS range.
SYMBOLS
NON-ROTATING
ROD ACCURACY
SPECIFICATIONS
Bore Size (mm) Ø12 Ø16 Ø20 Ø25 Ø32 Ø40 Ø50 Ø63
Non-rotating rod accuracy ±2° ±1° ±0.8°
MODEL:
STANDARD
STROKE
Bore size
(mm)
Double Acting Single Acting
Single rod
type Double rod
type
Non- rotating
piston rod
type
Rear boss
mount type Spring return
type Spring Extend
type
Standard Stroke (mm) Standard Stroke (mm)
12 5, 10, 15, 20,
25, 30 5, 10, 15, 20,
25, 30 5, 10, 15, 20, 25,
30 5, 10, 15, 20,
25, 30 5, 10 5, 10
20 5, 10, 15, 20,
25, 30, 35, 40,
45, 50
5, 10, 15, 20,
25, 30, 35, 40,
45, 50
5, 10, 15, 20, 25,
30, 35, 40, 45, 50
5, 10, 15, 20,
25, 30, 35, 40,
45, 50 5, 10 5, 10
32 5,10,15,20,25,
30,35,40,45,
50,75,100
5,10,15,20,25,
30,35,40,45,
50,75,100
5,10,15,20,25,
30,35,40,45,
50,75,100
5,10,15,20,25,
30,35,40,45,
50,75,100 5,10 5,10
50 5, 10, 15, 20,
25, 30, 35,
40, 45, 50,
75, 100
5, 10, 15, 20,
25, 30, 35,
40, 45, 50,
75, 100
5,10,15,20,25,30,
35,40,45,
50,75,100 5, 10, 15, 20,
25, 30, 35,
40, 45, 50,
75, 100
––
80
100
63
40
25
16
–
*See following section for Ø125, Ø140, Ø160mm sizes
Note: When a non standard stroke is required SMC will fit a spacer to adjust the stroke.
When a magnet is fitted the overall length is 10mm longer than non magnetic.
When non standard stroke or long stroke are required consult SMC for dimensions.
10,20 10,20
MINIMUM
OPERATING
PRESSURE
Bore size (mm)
Type 12 16 20 25 32 40 50 63 80 100
Double acting 0.7 0.7 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
Single acting 2.5 2.5 1.8 1.8 1.7 1.5 1.3 - - -
Bar
HOW TO
ORDER
SEE NEXT PAGE ☞
Fluid Air
Proof Pressure 1.5MPa (15.3kgf/cm2)
Max. Operating Pressure 1.0MPa (10.2kgf/cm2)
Min. Operating Pressure 0.05MPa (0.51kgf/cm2)
Ambient and Fluid Temperature Without auto switch: -10 ~ +70˚C
(No freezing allowed)
With auto switch : -10 ~ +60˚C
(No freezing allowed)
Lubrication Non-lube
Cushion Rubber Cushion
Rod End Thread Female Thread ( Standard )
Thread Tolerance JIS 2 Class
Stroke Length Tolerance +1.4, 0
Mounting Basic Type
Mounting types Through hole (standard), Both ends tapped
TECHNICAL
SPECIFICATIONS
1-122
FOR FURTHER TECHNICAL
DETAILS ON THIS
PRODUCT REQUEST
CATALOGUE REFERENCE
E210-B
LINEAR ACTUATOR: COMPACT CYLINDER
SERIES CQ2 (UPTO Ø100MM)
Actuators
A double acting, magnetic, non-rotating,
standard through hole mounting type,
20mm bore - 50mm stroke, cushioned
cylinder with male thread rod end
EXAMPLES
CDQ2KB20-50DCM
MODEL
Nil …Single rod
W……Double Rod
K ……Non-rotating
ACTION
D……Double acting
S ……Single acting/Spring return
T ……Single acting/Spring extend
BODY OPTION
Nil …Standard type (female)
C ……Bumper cushion
M ……Rod end male thread
F ……Rear boss mount
ACTION
DOUBLE ACTING
WITH AUTO SWITCH
TYPE
B……Through hole
(Standard type)
A ……Both ends tapped
L ……Axial Foot Type
F ……Rod side flange type
G ……Head side flange type
D ……Clevis type
BORE SIZE
12 …12mm
16 …16mm
20 …20mm
25 …25mm
32 …32mm
40 …40mm
50 …50mm
63 …63mm
80 …80mm
100 …100mm
BODY OPTION
Note1) Nil …Standard type (female)
Note2) C ……Bumper cushion
M ……………Rod end male thread
F ……………Rear boss mount
Note 1: Cushion type is standard for ø12
Note 2: Model number of the rear boss mount type
shall be as follows.
Example: CDQ2B12-10DFC
Note 3: Front boss mount type is optional
CYLINDER STROKE (SEE BELOW)
HOW TO
ORDER
CQ2 COMPACT CYLINDER SERIES
SEE RELEVANT PAGES FOR Ø125-160MM SIZES)
STANDARD TYPE
CQ2
CDQ2 D
Code
Action Single rod Double Rod Non-
rotating rod
Double
acting
Nil M C CM FFM FC FCM Nil M C CM Nil M C CM
ø12~
ø25 – – ● ● – – ● ● – – ❍ ❍ – – ● ●
ø32~
ø63 ● ● ● ❍ ● ● ● ❍ ● ● ❍ ❍ ● ● – –
ø80~
ø100 ●●●●●●●●●●❍❍●●– –
Single acting
Spring return
Spring
Extend
●●●●●●●●●●❍❍– – – –
Body options/Available
●
- Standard
❍
- Optional
Body options/Available
●
- Standard
❍
- Optional
NON AUTO SWITCH TYPE
AUTO SWITCH TYPE
CYLINDER STROKE (MAGNETIC & NON-MAGNETIC)
Bore Standard Stroke
Double Acting, Double Acting, Double Acting, Single Acting, Single Acting, Large Bore Double Acting
Single Rod Double Rod Non-Rotating Rod Spring Return Spring Extend Single Rod & Double Rod
12 5,10,15,20,25,30 5,10,15,20,25,30 5,10,15,20,25,30 5,10 5,10 -
16 5,10,15,20,25,30 5,10,15,20,25,30 5,10,15,20,25,30 5,10 5,10 -
20 5,10,15,20,25,30,45,50 5,10,15,20,25,30,45,50 5,10,15,20,25,30,45,50 5,10 5,10 -
25 5,10,15,20,25,30,45,50 5,10,15,20,25,30,45,50 5,10,15,20,25,30,45,50 5,10 10 -
32 5,10,15,20,25,30,45,50,75,100 5,10,15,20,25,30,45,50 5,10,15,20,25,30,45,50,75,100 5,10 10 -
40 5,10,15,20,25,30,45,50,75,100 5,10,15,20,25,30,45,50 5,10,15,20,25,30,45,50,75,100 5,10 10 -
50 10,15,20,25,30,45,50,75,100 10,15,20,25,30,45,50 10,15,20,25,30,45,50,75,100 10,20 10,20 -
63 10,15,20,25,30,45,50,75,100 10,15,20,25,30,45,50 10,15,20,25,30,45,50,75,100 - - -
80 10,15,20,25,30,45,50,75,100 10,15,20,25,30,45,50 10,15,20,25,30,45,50,75,100 - - -
100 10,15,20,25,30,45,50,75,100 10,15,20,25,30,45,50 10,15,20,25,30,45,50,75,100 - - -
125 - - - - - 10,20,30,40,50,75,125,150,200,250,300
140 - - - - - 10,20,30,40,50,75,125,150,200,250,300
160 - - - - - 10,20,30,40,50,75,125,150,200,250,300
Code
Action Single rod Double Rod Non-
rotating rod
Double
acting
Nil M C CM FFM FC FCM Nil M C CM Nil M C CM
ø12~
ø25 ● ● ● ❍ ● ● ● ❍ ● ● ❍ ❍ ● ● – –
ø32~
ø63 ●●●●●●●●●●❍❍●●– –
ø80~
ø100 ●●●●●●●●●●❍❍– – – –
Single acting
Spring return
Spring Extend ● ● – – ● ● ––––––––––
WITH AUTO SWITCH
CAPABILITY
A double acting, non-magnetic, 16mm bore
-30mm stroke cylinder with standard
through hole mounting.
EXAMPLES
CQ2B16-30D
1-123
FOR FURTHER TECHNICAL
DETAILS ON THIS
PRODUCT REQUEST
CATALOGUE REFERENCE
E210-B
LINEAR ACTUATOR: COMPACT CYLINDER
SERIES CQ2(UPTO Ø100MM)
Actuators
Castle Hill NSW.............Tel: (02) 680 3222.....Fax: (02) 894 5719
ORDER LINES
Tel: 01-501822 Fax: 01-502710
ORDER LINES
SEE INSIDE FRONT COVER FOR
DETAILS OF YOUR LOCAL SALES OFFICE
V
Standard Models
• Double Acting Single Rod
• Double Acting Double Rod
• Double Acting Non-Rotating Rod
• Double Acting Rear Boss Mount Type
•Single Acting Spring Return
• Single Acting Spring Extend
Also Available
• Adjustable Stroke Cylinder/Extension Adjustable Type
•Adjustable Stroke Cylinder/Retraction Adjustable Type
•Dual Stroke Cylinder/Double Rod Type
•Dual Stroke Cylinder/Single Rod Type
•High Temperature Cylinder
• Low Temperature Cylinder
• Air Hydro Cylinder
• Slow Speed Cylinder
• Clean Room Cylinder
• Copper Free Cylinder
• Stainless Steel Piston and Nut Cylinder
• Plus Others
THE CQ2 RANGE
OF COMPACT CYLINDERS
THEORETICAL FORCE
SINGLE ACTING TYPE DOUBLE ACTING TYPE
Action Bore
size
(mm)
Operating pressure
(bar) Spring
extend
position
Spring
returned
position
Rod end
Max.
axial load
357
Spring
Return
12 1.9 4.2 6.5 1.4 0.4 0.23
16 4.5 8.5 12.5 1.5 0.6 0.61
20 7.8 14.1 20.3 1.6 0.6 0.67
25 12.6 22.4 32.2 2.1 1.1 1.63
32 21.7 37.8 53.8 2.4 1.5 1.77
40 34.5 59.7 84.8 3.1 1.3 1.77
50 52.9 92.1 131.4 5.5 2.5 3.1
Spring
Extend
12 1.4 3.2 4.8 1.1 0.3 0.23
16 2.4 5.4 8.4 2.1 0.4 0.61
20 4.2 8.9 13.6 2.8 0.5 0.67
25 8.3 15.8 23.4 3.0 1.0 1.63
32 15.0 27.1 39.2 3.0 2.0 1.77
40 28.6 49.7 70.8 3.0 2.0 1.77
50 40.9 73.9 106.9 8.5 2.5 3.1
Bore size
(mm) Acting
direction Operating pressure (bar)
3 5 7
12 IN 2.5 4.2 5.9
OUT 3.3 5.6 7.9
16 IN 4.5 7.5 10.5
OUT 6 10 14
20 IN 7 11.7 16.4
OUT 9.4 15.7 21.9
25 IN 11.3 18.8 26.4
OUT 14.7 24.5 34.3
32 IN 18 30 42
OUT 24 40 56
40 IN 31 52 73
OUT 37 62 87
50 IN 49 82 115
OUT 58 98 137
63 IN 84 140 196
OUT 93 155 218
80 IN 136 227 317
OUT 150 251 352
100 IN 214 357 500
OUT 236 393 550
(Kgf)
(Kgf)
125 IN 338 563 788
OUT 368 614 859
140 IN 431 719 1006
OUT 461 770 1077
160 IN 565 942 1319
OUT 603 1005 1407
Bore Long stroke models
All bore sizes 75, 100, 125, 150, 175, 200, 250, 300mm
LONG STROKE
MODELS
SPACE
ECONOMY
Compact CQ cylinder models can perform the same
work as a much larger traditional ISO cylinder. The
compact nature of the product does mean that it
has, however, slightly lower resistance to side loads.
SMC’s CQ2 cylinders are 50% shorter and weigh
50% less than equivalent tie-rod cylinders.
CQ2 x Bore Y Stroke
C95 x Bore Y Stroke
1-124
FOR FURTHER TECHNICAL
DETAILS ON THIS
PRODUCT REQUEST
CATALOGUE REFERENCE
E210-B
LINEAR ACTUATOR: COMPACT CYLINDER
SERIES CQ2 (UPTO Ø100MM)
Actuators
ACCESSORIES
SEAL KITS
CQ2 COMPACT CYLINDER
SEAL KITS
(NITRILE - STANDARD)
CQ2B12-PS
CQ2B16-PS
CQ2B20-PS
CQ2B25-PS
CQ2B32-PS
CQ2B40-PS
CQ2B50-PS
CQ2B63-PS
CQ2B80-PS
CQ2B100-PS
SEAL KITS
(NITRILE - NON ROTATING)
CQ2KB12-PS
CQ2KB16-PS
CQ2KB20-PS
CQ2KB25-PS
CQ2KB32-PS
CQ2KB40-PS
CQ2KB50-PS
CQ2KB63-PS
Model C D Mounting
Bolt Model C D Mounting
Bolt Model C D Mounting
Bolt
CQ2B12-5D 6.5 25 M3X25L CQ2B32-5D 9 30 M5X30L CQ2B63-10D 14.5 50 M8X50L
-10D 30 X30L -10D 35 X35L -15D 55 X55L
-15D 35 X35L -15D 40 X40L -20D 60 X60L
-20D 40 X40L -20D 45 X45L -25D 65 X65L
-25D 45 X45L -25D 50 X50L -30D 70 X70L
-30D 50 X50L -30D 55 X55L -35D 75 X75L
CQ2B16-5D 5 25 M3X25L -35D 60 X60L -40D 80 X80L
-10D 30 X30L -40D 65 X65L -45D 85 X85L
-15D 35 X35L -45D 70 X70L -50D 90 X90L
-20D 40 X40L -50D 75 X75L -75D 125 X125L
-25D 45 X45L -75D 110 X110L -100D 150 X150L
-30D 50 X50L -100D 135 X135L CQ2B80-10D 15 55 M10X55L
CQ2B20-5D 7.5 25 M5X25L CQ2B40-5D 7.5 35 M5X35L -15D 60 X60L
-10D 30 X30L -10D 40 X40L -20D 65 X65L
-15D 35 X35L -15D 45 X45L -25D 70 X70L
-20D 40 X40L -20D 50 X50L -30D 75 X75L
-25D 45 X45L -25D 55 X55L -35D 80 X80L
-30D 50 X50L -30D 60 X60L -40D 85 X85L
-35D 55 X55L -35D 65 X65L -45D 90 X90L
-40D 60 X60L -40D 70 X70L -50D 95 X95L
-45D 65 X65L -45D 75 X75L -75D 130 X130L
-50D 70 X70L -50D 80 X80L -100D 155 X155L
CQ2B25-5D 9.5 30 M5X30L -75D 115 X115L CQ2B100-10D 15.5 65 M10X65L
-10D 35 X35L -100D 140 X140L -15D 70 X70L
-15D 40 X40L CQ2B50-10D 12.5 45 M6X45L -20D 75 X75L
-20D 45 X45L -15D 50 X50L -25D 80 X80L
-25D 50 X50L -20D 55 X55L -30D 85 X85L
-30D 55 X55L -25D 60 X60L -35D 90 X90L
-35D 60 X60L -30D 65 X65L -40D 95 X95L
-40D 65 X65L -35D 70 X70L -45D 100 X100L
-45D 70 X70L -40D 75 X75L -50D 105 X105L
-50D 75 X75L -45D 80 X80L -75D 140 X140L
-50D 85 X85L -100D 165 X165L
-75D 120 X120L
-100D 145 X145L
ACCESSORIES
MOUNTING BOLTS
CQ2 COMPACT CYLINDER
DIMENSIONS
MOUNTING BOLTS
CQ2 COMPACT CYLINDER
ACCESSORIES
AUTO SWITCHES
MORE ACCESSORIES
SEE NEXT PAGE ☞
MODEL
Part no Part no
Grommet Type Connector Type TYPE LOAD VOLTAGE LOAD CURRENT POWER SOURCE INTERNAL VOLTAGE DROP INDICATOR LAMP
D-A73L D-A73CL REED 24VDC
100VAC 5~40mA
5~20mA MAX 2.4V ON:RED LED
D-A80L D-A80CL REED 24VDC/AC OR LESS
100VDC/AC MAX 50mA
MAX 20mA 0 NONE
D-F79L-Q ~ 3 WIRE
SOLID STATE NPN 28VDC OR LESS MAX 150mA 5~28VDC 0.8V MAX ON:RED LED
D-F7PL-Q ~ 3 WIRE
SOLID STATE PNP 28VDC OR LESS MAX 100mA 5~28VDC 0.8V MAX ON:RED LED
D-J79L-Q D-J79CL-Q 2 WIRE
SOLID STATE 28VDC OR LESS 5~ 150mA ~ 3V MAX ON:RED LED
ACCESSORIES
AUTO SWITCH MOUNTING SCREW
BQ-1 ……………………………(Ø12~25)
BQ-2 ……………………………(Ø32~160)
SPECIFICATIONS
1-125
FOR FURTHER TECHNICAL
DETAILS ON THIS
PRODUCT REQUEST
CATALOGUE REFERENCE
E210-B
LINEAR ACTUATOR: COMPACT CYLINDER
SERIES CQ2(UPTO Ø100MM)
Actuators
Castle Hill NSW.............Tel: (02) 680 3222.....Fax: (02) 894 5719
ORDER LINES
Tel: 01-501822 Fax: 01-502710
ORDER LINES
SEE INSIDE FRONT COVER FOR
DETAILS OF YOUR LOCAL SALES OFFICE
V
ACCESSORIES
MOUNTING BOLTS
CDQ2 COMPACT CYLINDER Ø12-100MM
DIMENSIONS
MOUNTING BOLTS
CDQ2 COMPACT CYLINDER
Model C D Mounting
Bolt Model C D Mounting
Bolt Model C D Mounting
Bolt
CDQ2B12-5D 5.5 35 M3X35L CDQ2B32-5D 9 40 M5X40L CDQ2B63-10D 14.5 60 M8X60L
-10D 40 X40L -10D 45 X45L -15D 65 X65L
-15D 45 X45L -15D 50 X50L -20D 70 X70L
-20D 50 X50L -20D 55 X55L -25D 75 X75L
-25D 55 X55L -25D 60 X60L -30D 80 X80L
-30D 60 X60L -30D 65 X65L -35D 85 X85L
CDQ2B16-5D 8 40 M3X40L -35D 70 X70L -40D 90 X90L
-10D 45 X45L -40D 75 X75L -45D 95 X95L
-15D 50 X50L -45D 80 X80L -50D 100 X100L
-20D 55 X55L -50D 85 X85L -75D 125 X125L
-25D 60 X60L -75D 110 X110L -100D 150 X150L
-30D 65 X65L -100D 135 X135L CDQ2B80-10D 15 65 M10X65L
CDQ2B20-5D 10.5 40 M5X40L CDQ2B40-5D 7.5 45 M5X45L -15D 70 X70L
-10D 45 X45L -10D 50 X50L -20D 75 X75L
-15D 50 X50L -15D 55 X55L -25D 80 X80L
-20D 55 X55L -20D 60 X60L -30D 85 X85L
-25D 60 X60L -25D 65 X65L -35D 90 X90L
-30D 65 X65L -30D 70 X70L -40D 95 X95L
-35D 70 X70L -35D 75 X75L -45D 100 X100L
-40D 75 X75L -40D 80 X80L -50D 105 X105L
-45D 80 X80L -45D 85 X85L -75D 130 X130L
-50D 85 X85L -50D 90 X90L -100D 155 X155L
CDQ2B25-5D 9.5 40 M5X40L -75D 115 X115L CDQ2B100-10D 15.5 75 M10X75L
-10D 45 X45L -100D 140 X140L -15D 80 X80L
-15D 50 X50L CDQ2B50-10D 15.5 55 M6X55L -20D 85 X85L
-20D 55 X55L -15D 60 X60L -25D 90 X90L
-25D 60 X60L -20D 65 X65L -30D 95 X95L
-30D 65 X65L -25D 70 X70L -35D 100 X100L
-35D 70 X70L -30D 75 X75L -40D 105 X105L
-40D 75 X75L -35D 80 X80L -45D 110 X110L
-45D 80 X80L -40D 85 X85L -50D 115 X115L
-50D 85 X85L -45D 90 X90L -75D 140 X140L
-50D 95 X95L -100D 165 X165L
-75D 120 X120L
-100D 145 X145L
Bore (mm) *Axial foot Flange Clevis
12 CQ-L012 CQ-F012 CQ-D012
16 CQ-L016 CQ-F016 CQ-D016
20 CQ-L020 CQ-F020 CQ-D020
25 CQ-L025 CQ-F025 CQ-D025
32 CQ-L032 CQ-F032 CQ-D032
40 CQ-L040 CQ-F040 CQ-D040
50 CQ-L050 CQ-F050 CQ-D050
63 CQ-L063 CQ-F063 CQ-D063
80 CQ-L080 CQ-F080 CQ-D080
100 CQ-L100 CQ-F100 CQ-D100
ACCESSORIES
MOUNTING ATTACHMENTS CQ2 & CDQ2
*Fit 2 foot fixtures on each cylinder.
Page No.
Non-Magnetic CQ2 B (A) Single Acting, Spring Return 1-126
Single Acting, Spring Extend 1-126
Double Acting, Single Rod 1-127
Double Acting, Non-Rotate 1-128
Double Acting, Double Rod 1-129
Magnetic CDQ2B (A) Double Acting, Single Rod 1-130
Double Acting, Non-Rotate 1-130
Double Acting, Double Rod 1-132
Note: Double Acting/Axial Foot type
Double Acting/Rear Boss Mount type
Double Acting/Rod Side Flange type
Double Acting/Head Side Flange type
Double Acting/Clevis type
DIMENSIONAL DRAWING INDEX
}
Contact SMC or refer to
Catalogue E210-B
1-126
FOR FURTHER TECHNICAL
DETAILS ON THIS
PRODUCT REQUEST
CATALOGUE REFERENCE
E210-B
LINEAR ACTUATOR: COMPACT CYLINDER
SERIES CQ2 (UPTO Ø100MM)
Actuators
DIMENSIONS
CQ2 SINGLE ACTING SPRING RETURN Ø12~25MM DIMENSIONS
CQ2 SINGLE ACTING SPRING RETURN Ø32~50MM
A B F
Bore size
(mm) 5st 10st 20st 5st 10st 20st ØD E 5st 10st H C ØI
12 25.5 30.5 - 22 27 - 6 25 5 5 M3X0.5 6 32
16 27 32 - 23.5 28.5 - 8 29 5.5 5.5 M4X0.7 8 38
20 29 34 - 24.5 29.5 - 10 36 5.5 5.5 M5X0.8 7 47
25 32.5 37.5 - 27.5 32.5 - 12 40 5.5 5.5 M6X1.0 12 52
32 35 40 - 28 33 - 16 45 5.5 7.5 M8X1.25 13 60
40 41.5 46.5 - 34.5 39.5 - 16 52 8 8 M8X1.25 13 69
50 - 48.5 58.5 - 40.5 50.5 20 64 10.5 10.5 M10X1.5 15 86
P Q
Bore size
(mm) J K L M ØN ØO 5st 10st 20st 5st 10st W Z
12 - 5 3.5 15.5 3.5 6.4Depth3.5 M5X0.8 - 7.5 7.5 - -
16 - 6 3.5 20 3.5 6.5Depth3.5 M5X0.8 - 8 8 - 10
20 - 8 4.5 25.5 5.5 9Depth7 M5X0.8 - 9 9 - 10
25 - 10 5 28 5.5 9Depth7 M5X0.8 - 11 11 - 10
32 4.5 14 7 34 5.5 9Depth7 M5X0.8 1/8 - 11.5 10.5 49.5 18
40 5 14 7 40 5.5 9Depth7 1/8 - 11 11 57 18
50 7 17 8 50 6.6 11Depth8 - 1/4 10.5 10.5 71 22
DIMENSIONS
CQ2 SINGLE ACTING SPRING EXTEND
Ø12~Ø50mm
Note) Magnetic version available
1-127
FOR FURTHER TECHNICAL
DETAILS ON THIS
PRODUCT REQUEST
CATALOGUE REFERENCE
E210-B
LINEAR ACTUATOR: COMPACT CYLINDER
SERIES CQ2(UPTO Ø100MM)
Actuators
Castle Hill NSW.............Tel: (02) 680 3222.....Fax: (02) 894 5719
ORDER LINES
Tel: 01-501822 Fax: 01-502710
ORDER LINES
SEE INSIDE FRONT COVER FOR
DETAILS OF YOUR LOCAL SALES OFFICE
V
DIMENSIONS
CQ2 DOUBLE ACTING Ø12~25MM (NON-MAGNETIC)
DIMENSIONS
CQ2 DOUBLE ACTING Ø32~100MM (NON-MAGNETIC)
MORE DIMENSIONS
SEE NEXT PAGE ☞
Model (Note 1)
Stroke Range (mm) A B ZØD E F H C ØI J K L M ØN ØO P Q W
CQ2B12-•D 5~30 20.5 17 -6 25 5 M3X0.5 6 32 - 5 3.5 15.5 3.5 6.5Depth3.5 M5X0.8 7.5 -
CQ2B16-•D 5~30 22.0 18.5 108 29 5.5 M4X0.7 8 38 - 6 3.5 20 3.5 6.5Depth3.5 M5X0.8 8 -
CQ2B20-•D 5~50 24 19.5 1010 36 5.5 M5X0.8 7 47 - 8 4.5 25.5 5.5 9Depth7 M5X0.8 9 -
CQ2B25-•D 5~50 27.5 22.5 1012 40 5.5 M6x1.0 12 52 - 10 5 28 5.5 9Depth7 M5X0.8 11 -
CQ2B32-•D 530 23 1816 45 5.5 M8X1.25 13 60 4.5 14 7 34 5.5 9Depth7 M5X0.8
10.5 49.5
CQ2B40-•D 5~50 36.5 29.5 1816 52 8 M8X1.25 13 69 5 14 7 40 5.5 9Depth7 1/8 11 57
CQ2B50-•D 10~50 38.5 30.5 2220 64 10.5 M10X1.5 15 86 7 17 8 50 6.6 11Depth8 1/4 10.5 71
CQ2B63-•D 10~50 44 36 2220 77 10.5 M10X1.5 15 103 7 17 8 60 9 14Depth10.5 1/4 15 84
CQ2B80-•D 10~50 53.5 43.5 2625 98 12.5 M16X2.0 21 132 6 22 10 77 11 17.5Depth13.5 3/8 16 104
CQ2B100-•D 10~50 65 53 2630 117 13 M20x2.5 27 156 6.5 27 12 94 11 17.4Depth13.5 3/8 23 123.5
10~50 7.5 1/8
11.5
NOTE: Standard stroke available at 5mm intervals
Note 1) Standard stroke available at 5mm intervals.
Note 2) A spacer of 5, 10, 15 and 20mm is used for
intermediate stroke.
(55, 60, 65, 70, 80, 85, 90, 95) between 55
and 100mm stroke.
Note 3) Unless specifies, dimensions are same as above.
(Both ends tapped type, Rod end male thread
type)
Bore Size
(mm) Stroke
(mm) A B F P Q
32 75,100 40 33 7.5 1⁄810.5
40 75,100 46.5 39.5 8 1⁄811
50 75,100 48.5 40.5 10.5 1⁄410.5
63 75,100 54 46 10.5 1⁄415
80 75,100 63.5 53.5 12.5 3⁄816
100 75,100 75 63 13 3⁄823
Note 2) Long Stroke
For magnetic type see Series CDQ
1-128
FOR FURTHER TECHNICAL
DETAILS ON THIS
PRODUCT REQUEST
CATALOGUE REFERENCE
E210-B
LINEAR ACTUATOR: COMPACT CYLINDER
SERIES CQ2 (UPTO Ø100MM)
Actuators
DIMENSIONS
DOUBLE ACTING, NON-MAGNETIC
NON-ROTATING ROD Ø12MM
DIMENSIONS
DOUBLE ACTING, NON-MAGNETIC
NON-ROTATING ROD Ø16~25MM
DIMENSIONS
DOUBLE ACTING, NON-MAGNETIC
NON-ROTATING ROD Ø32MM
DIMENSIONS
DOUBLE ACTING, NON-MAGNETIC
NON-ROTATING ROD Ø40~63MM
MORE DIMENSIONS
SEE NEXT PAGE ☞
Model Note 1)
Stroke range
(mm) A B ØD E F G H C ØI J K L M ØN ØO P Q
5
W Z
CQ2KB12 5~30 25.5 22 6 25 5 1.5 M3x0.5 6 32 - 5.2 3.5 15.5 3.5 6.5Depth3.5 M5x0.8 12.5 15 - -
CQ2KB16 5~30 27 23.5 8 29 5.5 1.5 M4x0.7 8 38 - 6 3.5 20 3.5 6.5Depth3.5 M5x0.8 13 20
CQ2KB20 5~50 32 27.5 10 36 5.5 2 M5x0.8 7 47 - 8 4.5 25.5 5.5
See
Above
Drawing
M5x0.8 17 13 - -
CQ2KB25 5~50 35.5 30.5 12 40 5.5 2 M6x1.0 12 52 - 10 5 28 5.5 M5x0.8 19 15 - -
CQ2KB32 10~50 39 32 16 45 7.5 2 M8x1.25 13 60 4.5 14 7 34 5.5 M5x0.8
1/8 19.5 21 49.5 18
CQ2KB40 5~50 36.5 29.5 16 52 8 2 M8x1.25 13 69 5 14 7 40 5.5 9Depth7 1/8 11 28 57 18
CQ2KB50 5~50 38.5 30.5 20 64 10.5 2 M10x1.5 15 86 7 18 8 50 6.6 11Depth8 1/4 10.5 35 71 22
CQ2KB63 5~50 44 36 20 77 10.5 2 M10x1.5 15 103 7 18 8 60 9 14Depth10.5 1/4 15 35 84 22
ØTh9
0
-0.043
0
-0.052
0
-0.043
0
-0.043
0
-0.052
0
-0.052
0
-0.062
0
-0.062
20.55.5
AA
M4x0.7
M4x0.7
M6x1.0
M6x1.0
M6x1.0
N/A
N/A
N/A
BB
7
7
10
10
10
N/A
N/A
N/A
2 Through holes
4 AA x BB Threads
1-129
FOR FURTHER TECHNICAL
DETAILS ON THIS
PRODUCT REQUEST
CATALOGUE REFERENCE
E210-B
LINEAR ACTUATOR: COMPACT CYLINDER
SERIES CQ2(UPTO Ø100MM)
Actuators
Castle Hill NSW.............Tel: (02) 680 3222.....Fax: (02) 894 5719
ORDER LINES
Tel: 01-501822 Fax: 01-502710
ORDER LINES
SEE INSIDE FRONT COVER FOR
DETAILS OF YOUR LOCAL SALES OFFICE
V
DIMENSIONS
CQ2WB
DOUBLE ACTING, DOUBLE ROD,NON-MAGNETIC
Ø12~25MM
DIMENSIONS
CQ2WB
DOUBLE ACTING, DOUBLE ROD,NON-MAGNETIC
Ø32~100MM
Both Ends Tapped
1-130
FOR FURTHER TECHNICAL
DETAILS ON THIS
PRODUCT REQUEST
CATALOGUE REFERENCE
E210-B
LINEAR ACTUATOR: COMPACT CYLINDER
SERIES CDQ2 (UPTO Ø100MM)
Actuators
-
DIMENSIONS
DOUBLE ACTING MAGNETIC
NON-ROTATING PISTON TYPE Ø12MM
DIMENSIONS
DOUBLE ACTING MAGNETIC
NON-ROTATING PISTON TYPE Ø16~25MM
DIMENSIONS
DOUBLE ACTING MAGNETIC CDQ• Ø12~25MM DIMENSIONS
DOUBLE ACTING MAGNETIC CDQ• Ø32~100MM
Model Note 1)
Stroke range
(mm) A B ØD E F H C ØI J K L M ØN ØO P Q S U V Z
CDQ2B12 5~30 31.5 28 6 32 M3X0.5 6 - - 5 3.5 22 3.5 6.5Depth3.5 M5x0.8 11 35.5 19.5 25 -
CDQ2B16 5~30 34 30.5 8 38 5.5 M4X0.7 8 - - 6 3.5 28 3.5 6.5Depth3.5 M5x0.8 10 41.5 22.5 29 -
CDQ2B20 5~50 36 31.5 10 47 5.5 M5X0.8 7 - - 8 4.5 36 5.5 9Depth7 M5x0.8 10.5 48 24.5 36 -
CDQ2B25 5~50 37.5 32.5 12 52 5.5 M6X1.0 12 - 10 5 40 5.5 9Depth7 M5x0.8 11 53.5 27.5 40 -
CDQ2B32 5~50 40 33 16 45 7.5 M8X1.25 13 60 4.5 14 7 34 5.5 9Depth7 1/8 10.5 58.5 31.5 - 18
CDQ2B40 5~50 46.5 39.5 16 52 8 M8X1.25 13 69 5 14 7 40 5.5 9Depth7 1/8 11 66 35 - 18
CDQ2B50 10~50 48.5 40.5 20 64 10.5 M10X1.5 15 86 7 17 8 50 6.6 11Depth8 1/4 10.5 80 41 - 22
CDQ2B63 10~50 54 46 20 10.5 M10X1.5 15 103 7 17 8 60 9 14Depth10.5 1/4 15 93 47.5 - 22
CDQ2B80 10~50 63.5 53.5 25 98 12.5 M16X2.0 21 132 6 22 10 77 11 17.5Depth13.5 3/8 16 112.5 57.5 - 26
CDQ2B100 10~50 75 63 30 117 13 M20x2.5 27 156 6.5 27 12 94 11 17.5Depth13.5 3/8 23 132.5 67.5 - 26
MORE DIMENSIONS
SEE NEXT PAGE ☞
77
Through hole cross section
Through hole cross section
6.532628
31.5CDQ2B12 5~30
1-131
FOR FURTHER TECHNICAL
DETAILS ON THIS
PRODUCT REQUEST
CATALOGUE REFERENCE
E210-B
LINEAR ACTUATOR: COMPACT CYLINDER
SERIES CDQ2 (UPTO Ø100MM)
Actuators
Castle Hill NSW.............Tel: (02) 680 3222.....Fax: (02) 894 5719
ORDER LINES
Tel: 01-501822 Fax: 01-502710
ORDER LINES
SEE INSIDE FRONT COVER FOR
DETAILS OF YOUR LOCAL SALES OFFICE
V
DIMENSIONS
DOUBLE ACTING MAGNETIC
NON-ROTATING PISTON TYPE Ø32MM
DIMENSIONS
DOUBLE ACTING MAGNETIC
NON-ROTATING PISTON TYPE Ø40~63MM
( ) shows dimensions of solid state type and reed switch type (DF-A70H, A80H).
35.5
Model Note 1)
Stroke range
(mm) A B ØD E F G H C ØI J K L M ØN ØO P Q S ØTh9 U V X Z
CDQ2KB12 5~30 36.5 33 6 32 6.5 1.5 M3x0.5 6 - - 5.2 3.5 - 3.5 M5x0.8 16 15 0/-0.043 19.5 25 22 -
CDQ2KB16 5~30 39 35.5 8 38 5.5 1.5 M4x0.7 8 - - 6 3.5 - 3.5 M5x0.8 15 41.5 20 0/-0.052 22.5 29 28 -
CDQ2KB20 5~50 44 39.5 10 46.8 5.5 2 M5x0.8 7 - - 8 4.5 - 5.5 M5x0.8 18.5 48 13 0/-0.043 24.5 36 36 -
CDQ2KB25 5~50 45.5 40.5 12 40 5.5 2 M6x1.0 12 - - 10 5 - 5.5 M5x0.8 19 53.5 15 0/-0.043 27.5 40 40 -
CDQ2KB32 5~50 49 42 16 45 7.5 2 M8x1.25 13 60 4.5 14 7 34 5.5
See
above
drawing
1/8 19.5 58.5 21 0/-0.052 31.5 - 48 18
CDQ2KB40 5~50 46.5 39.5 16 52 8 2 M8x1.25 13 69 5 14 7 40 5.5 9 Depth 7 1/8 11 66 28 0/-0.052 35 - - 18
CDQ2KB50 10~50 48.5 40.5 20 64 10.5 2 M10x1.5 15 86 7 18 8 50 6.6 11 Depth 8 1/4 10.5 80 35 0/-0.062 41 - - 22
CDQ2KB63 10~50 54 46 20 77 10.5 2 M10x1.5 15 103 18 8 60 9 9 14 Depth 10.5 1/4 15 93 35 0/-0.062 47.5 - - 22
DIMENSIONS
Auto Switch
1-132
FOR FURTHER TECHNICAL
DETAILS ON THIS
PRODUCT REQUEST
CATALOGUE REFERENCE
E210-B
LINEAR ACTUATOR: COMPACT CYLINDER
SERIES CDQ2 (UPTO Ø100MM)
Actuators
DIMENSIONS
DOUBLE ACTING, DOUBLE ROD, MAGNETIC
Ø12~25MM
DIMENSIONS
DOUBLE ACTING, DOUBLE ROD, MAGNETIC
Ø32~100MM
1-133
FOR FURTHER TECHNICAL
DETAILS ON THIS
PRODUCT REQUEST
CATALOGUE REFERENCE
E210-B
LINEAR ACTUATOR: COMPACT CYLINDER
SERIES CQ2(OVER Ø100MM)
Actuators
Castle Hill NSW.............Tel: (02) 680 3222.....Fax: (02) 894 5719
ORDER LINES
Tel: 01-501822 Fax: 01-502710
ORDER LINES
SEE INSIDE FRONT COVER FOR
DETAILS OF YOUR LOCAL SALES OFFICE
V
LARGE BORE SIZE COMPACT CYLINDER
SERIES CQ2 Ø125, 140, 160MM
Compact, light weight, space-saving design
Magnetic option
Double acting
Rubber cushion standard
SYMBOLS
MODEL
Nil …Single rod
W……Double Rod
MOUNTING
B……Standard (Through hole,
Both ends tapped, Common)
ACTION
D……Double acting (Standard)
Note! When non standard stroke is required SMC will fit
a spacer to adjust the stroke.
CYLINDER STROKE
Stroke (mm)
10, 20, 30, 40, 50
75, 100, 125, 150
175, 200, 250, 300
BORE SIZE
125 …125mm
140 …140mm
160 …160mm
OPTION
C……With rubber cushion standard
CM …With rubber cushion and
male thread on rod end
HOW TO
OR D E R
SERIES CQ2 LARGE BORE
TECHNICAL
SPECIFICATIONS
Fluid Air
Proof pressure 1.5 MPa (15.3kgf/cm2)
Max. Operating pressure 1.0MPa (10.2kgf/cm2)
Min. Operating pressure 0.5MPa (5.1kgf/cm2)
Ambient and fluid temperature 5~60°C
Lubrication Not required
Cushion Rubber cushion standard
Rod end thread Female (standard type)
Stroke allowance (mm) +1.0
0
Mounting Standard type
Mounting type (standard) Through hole / Both ends tapped
B DQ 2 C
Bore size
(mm) Acting
direction Operating pressure (bar)
3 5 7
125 IN 337 562 787
OUT 368 613 859
140 IN 431 718 1006
OUT 461 769 1077
160 IN 565 942 1319
OUT 603 1005 1407
Units kgf
THEORETICAL FORCE
DOUBLE ACTING TYPE
C
PISTON
Nil …Basic
D ……Magnetic
ACCESSORIES
MOUNTING BOLTS
CDQ2 COMPACT CYLINDER
Ø125, 140, 160MM
Model C D Mounting
Bolt
CQ2B125/140-10DC 22.9 100 M12X100L
CQ2B125/140-20DC 22.9 110 M12X110L
CQ2B125/140-30DC 22.9 120 M12X120L
CQ2B125/140-40DC 22.9 130 M12X130L
CQ2B125/140-50DC 22.9 140 M12X140L
CQ2B125/140-75DC 22.9 165 M12X165L
CQ2B125/140-100DC 22.9 190 M12X190L
CQ2B125/140-125DC 22.9 215 M12X215L
CQ2B125/140-150DC 22.9 240 M12X240L
CQ2B125/140-175DC 22.9 265 M12X265L
CQ2B125/140-200DC 22.9 290 M12X290L
CQ2B125/140-250DC 22.9 340 M12X340L
CQ2B125/140-300DC 22.9 390 M12X390L
CQ2B160-10DC 27.7 110 M14X110L
CQ2B160-20DC 27.7 120 M14X120L
CQ2B160-30DC 27.7 130 M14X130L
CQ2B160-40DC 27.7 140 M14X140L
CQ2B160-50DC 27.7 150 M14X150L
CQ2B160-75DC 27.7 175 M14X175L
CQ2B160-100DC 27.7 200 M14X200L
CQ2B160-125DC 27.7 225 M14X225L
CQ2B160-150DC 27.7 250 M14X250L
CQ2B160-175DC 27.7 275 M14X275L
CQ2B160-200DC 27.7 300 M14X300L
CQ2B160-250DC 27.7 350 M14X350L
CQ2B160-300DC 27.7 400 M14X400
Ø125 & Ø140 use same bolts.
1-134
FOR FURTHER TECHNICAL
DETAILS ON THIS
PRODUCT REQUEST
CATALOGUE REFERENCE
E210-B
LINEAR ACTUATOR: COMPACT CYLINDER
SERIES CQ2 (OVER Ø100MM)
Actuators
DIMENSIONS
DOUBLE ACTING/SINGLE ROD Ø125, 140, 160
DIMENSIONS
DOUBLE ACTING/
DOUBLE ROD Ø125, 140, 160
( ): For models other than the reed switches D-A7 and A8.
Note 1) The standard stroke type is equipped with a spacer, so the total length is the same as the longer standard stroke
Note 2) Be sure to use the attached flat washer to mount the cylinder using a through hole.
Bore
Size A C H K L X
125 199 42 M30X1.5 32 58 45
140 199 42 M30X1.5 32 58 45
160 219 47 M36X1.5 36 64 50
Bore size Standard stroke range A B C D E F H I J K L M N OA OB P Q RA RB Z
125 10, 20, 30, 40, 50,
75, 100, 125, 150,
175, 200, 250, 300
99 83 30 36 142 24.5 M22X2.5 190 11 32 16 114 12.5 M14X2 21.2 3/8 24.5 25 18.4 32
140 99 83 30 36 158 24.5 M22X2.5 210 10 32 16 128 12.5 M14X2 21.2 3/8 24.5 25 18.4 32
160 108 91 33 40 178 27.5 M24X3 238 10 36 17 144 14.5 M16X2 24.2 3/8 27.5 28 21.2 32
Bore size
(mm)
D-A7,A8
D-A7■H,A80H
D-F7■,J79
D-F7■F
D-F7■W,J79W
D-A73C
D-A80C D-J79C D-A79W D-F7■V D-F7V■WV
S U S U S U S U S U S U
125 163 81 169 87 167.5 85.5 164.5 82.5 165.5 83.5 168 86
140 178 89 184 95 182.5 93.5 179.5 90.5 180.5 91.5 183 94
160 198 99 199 100 197.5 98.5 199.5 100.5 200.5 101.5 203 104
AUTO SWITCH MOUNTING
ROD END MALE THREAD
Bore
Size A C H K L X
125 199 42 M30X1.5 32 58 45
140 199 42 M30X1.5 32 58 45
160 219 47 M36X1.5 36 64 50
Bore size Standard stroke range A B C Note 3) D E H I J K L M N OA OB P Q RA RB Z
125 10, 20, 30, 40, 50,
75, 100, 125, 150, 175, 200, 250, 300
115 83 30 (22.5) 36 142 M22X2.5 190 11 32 16 114 12.5 M14X2 21.2 3/8 24.5 25 18.4 32
140 115 83 30 (22.5) 36 158 M22X2.5 210 10 32 16 128 12.5 M14X2 21.2 3/8 24.5 25 18.4 32
160 125 91 33 (26.5) 40 178 M24X3 238 10 36 17 144 14.5 M16X2 24.2 3/8 27.5 28 21.2 32
Bore size
(mm)
D-A7,A8
D-A7■H,A80H
D-F7■,J79
D-F7■F
D-F7■W,J79W
D-A73C
D-A80C D-J79C D-A79W D-F7■V D-F7V■WV
S U S U S U S U S U S U
125 163 81 169 87 167.5 85.5 164.5 82.5 165.5 83.5 168 86
140 178 89 184 95 182.5 93.5 179.5 90.5 180.5 91.5 183 94
160 198 99 199 100 197.5 98.5 199.5 100.5 200.5 101.5 203 104
( ): For models other than the reed switches D-A7 and A8.
Note 1) The standard stroke type is equipped with a spacer, so the total length is the same as the longer standard stroke
Note 2) Be sure to use the attached flat washer to mount the cylinder using a through hole.
Note 3) ( ): Effective length on one side of the 10-stroke type.
AUTO SWITCH MOUNTING
ROD END MALE THREAD
1-135
FOR FURTHER TECHNICAL
DETAILS ON THIS
PRODUCT REQUEST
CATALOGUE REFERENCE
E210-B
LINEAR ACTUATOR: COMPACT CYLINDER
SERIES CQ2(UPTO Ø100MM)
Actuators
Castle Hill NSW.............Tel: (02) 680 3222.....Fax: (02) 894 5719
ORDER LINES
Tel: 01-501822 Fax: 01-502710
ORDER LINES
SEE INSIDE FRONT COVER FOR
DETAILS OF YOUR LOCAL SALES OFFICE
V
DIMENSIONS
SINGLE KNUCKLE JOINT DIMENSIONS
FORK KNUCKLE JOINT
DIMENSIONS
KNUCKLE JOINT PIN See Series JB Floating Joints which are specifically designed
to be used with compact cylinders including CQ2 and CQS.
ACCESSORIES
FLOATING JOINTS
