J211 / MMBFJ211 -- N-Channel RF Amplifier J211 / MMBFJ211 N-Channel RF Amplifier Description This device is designed for HF/VHF mixer/amplifier and applications where process 50 is not adequate. Sufficient gain and low-noise for sensitive receivers. Sourced from process 90. G TO-92 12 3 Straight Lead Bulk Packing 1 2 1. Drain 2. Source 3. Gate S SOT-23 D Note: Source & Drain are interchangeable 3 Bent Lead Tape & Reel Ammo Packing Figure 1. J211 Device Package Figure 2. MMBFJ211 Device Package Ordering Information Part Number Top Mark Package Packing Method J211-D74Z J211 TO-92 3L Ammo MMBFJ211 62W SOT-23 3L Tape and Reel (c) 1997 Semiconductor Components Industries, LLC. September-2017, Rev. 2 Publication Order Number: J211-D74Z/D Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Values are at TA = 25C unless otherwise noted. Symbol Parameter Value Unit VDG Drain-Gate Voltage 25 V VGS Gate-Source Voltage -25 V IGF Forward Gate Current 10 mA -55 to 150 C TJ, TSTG Operating and Storage Junction Temperature Range Notes: 1. These ratings are based on a maximum junction temperature of 150C. 2. These are steady-state limits. ON Semiconductor should be consulted on applications involving pulsed or lowduty-cycle operations. Thermal Characteristics Values are at TA = 25C unless otherwise noted. Symbol Max. Parameter (3) J211 MMBFJ211(3) Unit Total Device Dissipation 350 225 mW Derate Above 25C 2.8 1.8 mW/C RJC Thermal Resistance, Junction-to-Case 125 RJA Thermal Resistance, Junction-to-Ambient 357 PD C/W 556 C/W Note: 3. Device mounted on FR-4 PCB 36mm x 18mm x 1.5mm; mounting pad for the collector lead minimum 6cm2. Electrical Characteristics Values are at TA = 25C unless otherwise noted. Symbol Parameter Conditions Min. Max. Unit Off Characteristics V(BR)GSS IGSS VGS(off) Gate-Source Breakdown Voltage IG = 1.0 A, VDS = 0 Gate Reverse Current VGS = 15 V, VDS = 0 Gate-Source Cut-Off Voltage VDS = 15 V, ID = 1.0 nA -25 V -100 pA -2.5 -4.5 V 7.0 20 mA 7000 12000 mhos 200 mhos On Characteristics IDSS Zero-Gate Voltage Drain Current(4) VDS = 15 V, VGS = 0 Small Signal Characteristics gfs goss Common Source Forward Transconductance VDS = 15 V, VGS = 0, f = 1.0 kHz Common Source Output Conductance VDS = 15 V, VGS = 0, f = 1.0 kHz Note: 4. Pulse test: pulse width 300 s www.onsemi.com 2 J211 / MMBFJ211 -- N-Channel RF Amplifier Absolute Maximum Ratings(1), (2) Figure 3. Parameter Interactions Figure 4. Common Drain-Source Figure 5. Transfer Characteristics Figure 6. Transfer Characteristics Figure 7. Leakage Current vs. Voltage Figure 8. Noise Voltage vs. Frequency www.onsemi.com 3 J211 / MMBFJ211 -- N-Channel RF Amplifier Typical Performance Characteristics Figure 9. Transconductance vs. Drain Current Figure 10. Output Conductance vs. Drain Current Figure 11. Capacitance vs. Voltage www.onsemi.com 4 J211 / MMBFJ211 -- N-Channel RF Amplifier Typical Performance Characteristics (Continued) os) Figure 12. Input Admittance Figure 13. Forward Transadmittance Figure 14. Output Admittance Figure 15. Reverse Transadmittance www.onsemi.com 5 J211 / MMBFJ211 -- N-Channel RF Amplifier Common Source Characteristics Figure 16. Input Admittance Figure 17. Forward Transadmittance Figure 18. Output Admittance Figure 19. Reverse Transadmittance www.onsemi.com 6 J211 / MMBFJ211 -- N-Channel RF Amplifier Common Gate Characteristics J211 / MMBFJ211 -- N-Channel RF Amplifier Physical Dimensions Figure 20. 3-Lead, TO-92, Molded, 0.2 In Line Spacing Lead Form www.onsemi.com 7 0.95 2.920.20 3 1.40 1.30+0.20 -0.15 1 2.20 2 0.60 0.37 (0.29) 0.95 0.20 1.00 A B 1.90 1.90 LAND PATTERN RECOMMENDATION SEE DETAIL A 1.20 MAX 0.10 0.00 (0.93) 0.10 C C 2.400.30 NOTES: UNLESS OTHERWISE SPECIFIED GAGE PLANE 0.23 0.08 0.25 0.20 MIN (0.55) SEATING PLANE A) REFERENCE JEDEC REGISTRATION TO-236, VARIATION AB, ISSUE H. B) ALL DIMENSIONS ARE IN MILLIMETERS. C) DIMENSIONS ARE INCLUSIVE OF BURRS, MOLD FLASH AND TIE BAR EXTRUSIONS. D) DIMENSIONING AND TOLERANCING PER ASME Y14.5M - 1994. E) DRAWING FILE NAME: MA03DREV10 SCALE: 2X Figure 21. 3-LEAD, SOT23, JEDEC TO-236, LOW PROFILE www.onsemi.com 8 J211 / MMBFJ211 -- N-Channel RF Amplifier Physical Dimensions (Continued) ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com (c) Semiconductor Components Industries, LLC N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com