ATC 800 C Series NPO Ceramic High RF Power Multilayer Capacitors * Case C Size (.250" x .250") * Capacitance Range: 1 pF to 51 pF and 1000 pF to 2700 pF * High Q * Ultra-Stable Performance * Low ESR/ESL * High RF Current/Voltage * High RF Power * High Reliability * 3600 WVDC * RoHS Compliant, Pb free ELECTRICAL AND MECHANICAL SPECIFICATIONS ATC's 800 C Series offers superb performance in demanding high RF power applications requiring consistent and reliable operation. The combination of highly conductive metal electrode systems, optimized case geometries, and proprietary dielectrics, yields the lowest ESR. ATC's new NPO low loss rugged dielectrics are designed to provide superior heat transfer in high RF power applications. Ultra-low ESR and superior thermal performance insure that the 800 C Series products are your best choice for high RF power applications from VHF through microwave frequencies. Typical functional applications: Bypass, Coupling, Tuning, Impedance Matching and DC Blocking. Typical circuit applications: HF/RF Power Amplifiers, Transmitters, Antenna Tuning, Plasma Chambers and Medical (MRI coils). QUALITY FACTOR (Q): ENVIRONMENTAL TESTS 250% of WVDC for capacitors rated at 500 volts DC or less for 5 seconds. 150% of WVDC for capacitors rated above 500 volts DC and 1250 volts DC for 5 seconds. 120% of WVDC for capacitors rated above 1250 volts DC for 5 seconds. ATC 800 C Series Capacitors are designed and manufactured to meet and exceed the requirements of EIA-198, MIL-PRF-55681 and MIL-PRF-123. THERMAL SHOCK: Greater than 5,000 (1.0 pF to 2700 pF) @ 1 MHz. TEMPERATURE COEFFICIENT OF CAPACITANCE (TCC): 0 30 PPM/C (-55C to +125C) INSULATION RESISTANCE (IR): 1 pF to 51 pF; 1000 pF to 2700 pF: 105 Megohms min. @ +25C at rated WVDC. 104 Megohms min. @ +125C at rated WVDC. Max. test voltage is 500 VDC. WORKING VOLTAGE (WVDC): See Capacitance Values Table, p 2. DIELECTRIC WITHSTANDING VOLTAGE (DWV): RETRACE: Less than (0.02% or 0.02 pF), whichever is greater. MIL-STD-202, Method 107, Condition A. AGING EFFECTS: None MOISTURE RESISTANCE: PIEZOELECTRIC EFFECTS: None (No capacitance variation with voltage or pressure). MIL-STD-202, Method 106. LOW VOLTAGE HUMIDITY: CAPACITANCE DRIFT: (0.02% or 0.02 pF), whichever is greater. MIL-STD-202, Method 103, Condition A, with 1.5 Volts DC applied while subjected to an environment of 85C with 85% relative humidity for 240 hours min. OPERATING TEMPERATURE RANGE: LIFE TEST: TERMINATION STYLES: MIL-STD-202, Method 108, for 2000 hours, at 125C. Voltage applied. 200% of WVDC for capacitors rated at 500 volts DC or less. 120% of WVDC for capacitors rated at 1250 volts DC or less. 100% of WVDC for capacitors rated above 1250 volts DC. From -55C to +125C (No derating of working voltage). See Mechanical Configurations, page 3. TERMINAL STRENGTH: Terminations for chips withstand a pull of 10 lbs. min., 20 lbs. typical, for 5 seconds in direction perpendicular to the termination surface of the capacitor. Test per MIL-STD-202, method 211. ATC # 001-1076 Rev. E; 11/10 ATC 800 C Capacitance Values CAP. CODE CAP. (pF) 1R0 1R1 1R2 1R3 1R4 1R5 1R6 1R7 1R8 1R9 2R0 2R1 2R2 2R4 2R7 3R0 3R3 3R6 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.4 2.7 3.0 3.3 3.6 RATED WVDC TOL. B, C, D CAP. CODE CAP. (pF) 3R9 4R3 4R7 5R1 5R6 6R2 6R8 7R5 8R2 9R1 100 110 120 130 150 160 180 200 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 3600 TOL. RATED WVDC CAP. CODE CAP. (pF) 3600 220 240 270 300 330 360 390 430 470 510 22 24 27 30 33 36 39 43 47 51 102 112 122 152 182 222 242 272 1000 1100 1200 1500 1800 2200 2400 2700 B, C, D F, G, J, K TOL. RATED WVDC F, G, J, K F, G, J, K 3600 300 CAPACITANCE TOLERANCE Code B C D F G K J Tol. 0.1 pF 0.25 pF 0.5 pF 1% 2% 5% 10% ATC PART NUMBER CODE ATC800 C 22 0 J TN 3600 X C Series Case Size Packaging C - ATC Matrix Tray (Standard) Capacitance Code: First 2 significant digits for capacitance. R=Decimal Point Laser Marking Indicates number of zeros following digits of capacitance in picofarads except for decimal values. WVDC Termination Code Capacitance Tolerance The above part number refers to a 800 C Series (case size C) 22 pF capacitor, J tolerance (5%), 3600 WVDC, with TN termination (RoHS Compliant, Tin Plated over Non-Magnetic Barrier Termination), laser marking and plastic Matrix Tray packaging. ATC accepts orders for our parts using designations with or without the "ATC" prefix. Both methods of defining the part number are equivalent, i.e., part numbers referenced with the "ATC" prefix are interchangeable to parts referenced without the "ATC" prefix. Customers are free to use either in specifying or procuring parts from American Technical Ceramics. A M E R I C A N w w Consult factory for additional performance data. T E C H N I C A L ATC North America +1-631-622-4700 * sales@atceramics.com 2 For additional information and catalogs contact your ATC representative or call direct at (+1-631) 622-4700. C E R A M I C S ATC Europe +46 8 6800410 * sales@atceramics-europe.com w . a t c e r a m i c s ATC Asia 86-755-2396-8759 * sales@atceramics-asia.com . c o m ATC 800 C Capacitors: Mechanical Configurations ATC SERIES & CASE SIZE BODY DIMENSIONS INCHES (mm) OUTLINES ATC TERM. CODE CASE SIZE & TYPE W/T IS A TERMINATION SURFACE LENGTH (L) T C Solderable Barrier W L T OVERLAP (Y) Tin Plated over Nickel Barrier Termination High Purity Silver Leads LL MS WL W L Microstrip .250 .015 (6.35 0.38) T .040 (1.02) max. .175 (4.45) max. 245 .025 (6.22 0.64) C TL AR WL LL = .500 (12.7) min. WL = See below TL = .004 .001 (.102 .025) ** W L Axial Ribbon LL = .500 (12.7) min. WL = .240 .005 (6.10 .127) TL = .004 .001 (.102 .025) Leads are Attached with High Temperature Solder. Silver Leads LL 800C MATERIALS RoHS Compliant TL C 800C THICKNESS (T) .230 +.025 -.010 (5.84 +0.64 -0.25) Y 800C WIDTH (W) LEAD AND TERMINATION DIMENSIONS AND MATERIALS T Custom lead styles and lengths are available; consult factory. All leads are high purity silver attached with high temperature solder and are RoHS compliant. ** WL = .110 (2.79) for capacitance values 680 pF; WL = .130 (3.30) for capacitance values > 680 pF ATC 800 C Capacitors: Non-Magnetic Mechanical Configurations ATC SERIES & CASE SIZE BODY DIMENSIONS INCHES (mm) OUTLINES ATC TERM. CODE CASE SIZE & TYPE W/T IS A TERMINATION SURFACE LENGTH (L) TN C W Non-Mag Solderable Barrier L THICKNESS (T) OVERLAP (Y) .230 +.025 -.010 (5.84 +0.64 -0.25) Y 800C WIDTH (W) LEAD AND TERMINATION DIMENSIONS AND MATERIALS T C RoHS Compliant Tin Plated over Non-Magnetic Barrier Termination High Purity Silver Leads TL LL 800C MN WL L T .250 .015 (6.35 0.38) .040 (1.02) max. .175 (4.45) max. LL = .500 (12.7) min. WL = .240 .005 (6.10 .127) TL = .004 .001 (.102 .025) Leads are Attached with High Temperature Solder. TL C 800C 245 .025 (6.22 0.64) W Non-Mag Microstrip MATERIALS LL Silver Leads WL AN L Non-Mag Axial Ribbon LL = .500 (12.7) min. WL = See below TL = .004 .001 (.102 .025) 245 .025 (6.22 0.64) W ** T Custom lead styles and lengths are available; consult factory. All leads are high purity silver attached with high temperature solder and are RoHS compliant. A M E R I C A N T E C H N I C A L ATC North America +1-631-622-4700 * sales@atceramics.com w w C E R A M I C S ATC Europe +46 8 6800410 * sales@atceramics-europe.com w . a t c e r a m i c s ATC Asia 86-755-2396-8759 * sales@atceramics-asia.com . c o m 3 Suggested Mounting Pad Dimensions ATC 800 C Performance Data 800 C ESR vs. Frequency 100 8.2 pF 10 pF 18 pF ESR (MilliOhms) 39 pF 1500 pF 2700 pF 10 1 10 100 1000 Frequency (MHz) Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale (ATC document #001-992 Rev. B; 12/05). Copies of these terms and conditions will be provided upon request. They may also be viewed on ATC's website at www.atceramics.com/productfinder/default.asp. Click on the link for Terms and Conditions of Sale. ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third parties which may result from its use. ATC reserves the right to revise the content or modify its product without prior notice. (c) 2009 American Technical Ceramics Corp. All Rights Reserved A M E R I C A N T E C H N I C A L ATC North America +1-631-622-4700 * sales@atceramics.com 4 w w ATC # 001-1076 Rev. E 11/10 C E R A M I C S ATC Europe +46 8 6800410 * sales@atceramics-europe.com w . a t c e r a m i c s ATC Asia 86-755-2396-8759 * sales@atceramics-asia.com . c o m