ATC800C1R4DAR3600XC - American Technical Ceramics Corp.

ATC # 001-1076 Rev. E; 11/10

ATC 800 C Series

NPO Ceramic

High RF Power

Multilayer Capacitors

• Case C Size • Capacitance Range: 1 pF to 51 pF

(.250" x .250") and 1000 pF to 2700 pF

• High Q • Ultra-Stable Performance

• Low ESR/ESL • High RF Current/Voltage

• High RF Power • High Reliability

• 3600 WVDC • RoHS Compliant, Pb free

ATC’s 800 C Series offers superb performance in demanding high

RF power applications requiring consistent and reliable operation.

The combination of highly conductive metal electrode systems,

optimized case geometries, and proprietary dielectrics, yields the

lowest ESR. ATC’s new NPO low loss rugged dielectrics are

designed to provide superior heat transfer in high RF power

applications. Ultra-low ESR and superior thermal performance

insure that the 800 C Series products are your best choice for high

RF power applications from VHF through microwave frequencies.

Typical functional applications: Bypass, Coupling, Tuning, Impedance

Matching and DC Blocking.

Typical circuit applications: HF/RF Power Amplifiers, Transmitters,

Antenna Tuning, Plasma Chambers and Medical (MRI coils).

ENVIRONMENTAL TESTS

ATC 800 C Series Capacitors are designed and manufactured to

meet and exceed the requirements of EIA-198, MIL-PRF-55681 and

MIL-PRF-123.

THERMAL SHOCK:

MIL-STD-202, Method 107, Condition A.

MOISTURE RESISTANCE:

MIL-STD-202, Method 106.

LOW VOLTAGE HUMIDITY:

MIL-STD-202, Method 103, Condition A, with 1.5 Volts DC applied

while subjected to an environment of 85°C with 85% relative

humidity for 240 hours min.

LIFE TEST:

MIL-STD-202, Method 108, for 2000 hours, at 125°C.

Voltage applied.

200% of WVDC for capacitors rated at 500 volts DC or less.

120% of WVDC for capacitors rated at 1250 volts DC or less.

100% of WVDC for capacitors rated above 1250 volts DC.

ELECTRICAL AND MECHANICAL

SPECIFICATIONS

QUALITY FACTOR (Q):

Greater than 5,000 (1.0 pF to 2700 pF) @ 1 MHz.

TEMPERATURE COEFFICIENT OF CAPACITANCE (TCC):

0 ±30 PPM/°C (-55°C to +125°C)

INSULATION RESISTANCE (IR):

1 pF to 51 pF; 1000 pF to 2700 pF:

105Megohms min. @ +25°C at rated WVDC.

104Megohms min. @ +125°C at rated WVDC.

Max. test voltage is 500 VDC.

WORKING VOLTA GE (WVDC): See Capacitance Values Table, p 2.

DIELECTRIC WITHSTANDING VOLTAGE (DWV):

250% of WVDC for capacitors rated at 500 volts DC or less for 5 seconds.

150% of WVDC for capacitors rated above 500 volts DC and

≤

1250 volts

DC for 5 seconds.

120% of WVDC for capacitors rated above 1250 volts DC for 5 seconds.

RETRACE: Less than ±(0.02% or 0.02 pF), whichever is greater.

AGING EFFECTS: None

PIEZOELECTRIC EFFECTS: None

(No capacitance variation with voltage or pressure).

CAPACITANCE DRIFT: ±(0.02% or 0.02 pF), whichever is

greater.

OPERATING TEMPERATURE RANGE:

From -55°C to +125°C (No derating of working voltage).

TERMINATION STYLES:

See Mechanical Configurations, page 3.

TERMINAL STRENGTH: Terminations for chips withstand a pull

of 10 lbs. min., 20 lbs. typical, for 5 seconds in direction

perpendicular to the termination surface of the capacitor. Test per

MIL-STD-202, method 211.

AMERICAN TECHNICAL CERAMICS

www.atceramics.com

ATC North America

+1-631-622-4700 • sales@atceramics.com ATC Europe

+46 8 6800410 • sales@atceramics-europe.com ATC Asia

86-755-2396-8759 • sales@atceramics-asia.com

ATC 800 C Capacitance Values

ATC PART NUMBER CODE

ATC800 C22 0 J TN 3600 X C

Series

Case Size

Capacitance Code:

First 2 significant digits for capacitance.

R=Decimal Point Laser Marking

Indicates number of zeros following digits WVDC

of capacitance in picofarads except for decimal values. Termination Code

Capacitance Tolerance

Packaging

C - ATC Matrix Tray (Standard)

The above part number refers to a 800 C Series (case size C) 22 pF capacitor, J tolerance (±5%),

3600 WVDC, with TN termination (RoHS Compliant, Tin Plated over Non-Magnetic Barrier Termination), laser marking and plastic Matrix Tray packaging.

For additional information and catalogs contact your ATC

representative or call direct at (+1-631) 622-4700.

Consult factory for additional performance data.

ATC accepts orders for our parts using designations

with

without

the

“ATC” prefix. Both methods of defining the part number are equivalent, i.e.,

part numbers referenced with the “ATC” prefix are interchangeable to parts

referenced without the “ATC” prefix. Customers are free to use either in

specifying or procuring parts from American Technical Ceramics.

CAPACITANCE TOLERANCE

Code B C D F G JK

Tol. ±0.1 pF ±0.25 pF ±0.5 pF ±1% ±2% ±5% ±10%

CAP.

CODE CAP.

(pF) TOL. RATED

WVDC CAP.

CODE CAP.

(pF) TOL. RATED

WVDC CAP.

CODE CAP.

(pF) TOL. RATED

WVDC

1R0 1.0

B, C, D 3600

3R9 3.9

B, C, D

3600

220 22

F, G, J, K

3600

300

1R1 1.1 4R3 4.3 240 24

1R2 1.2 4R7 4.7 270 27

1R3 1.3 5R1 5.1 300 30

1R4 1.4 5R6 5.6 330 33

1R5 1.5 6R2 6.2 360 36

1R6 1.6 6R8 6.8 390 39

1R7 1.7 7R5 7.5 430 43

1R8 1.8 8R2 8.2 470 47

1R9 1.9 9R1 9.1 510 51

2R0 2.0 100 10

2R1 2.1 110 11

F, G, J, K

102 1000

2R2 2.2 120 12 112 1100

2R4 2.4 130 13 122 1200

2R7 2.7 150 15 152 1500

3R0 3.0 160 16 182 1800

3R3 3.3 180 18 222 2200

3R6 3.6 200 20 242 2400

272 2700

AMERICAN TECHNICAL CERAMICS

www.atceramics.com

ATC North America

+1-631-622-4700 • sales@atceramics.com ATC Europe

+46 8 6800410 • sales@atceramics-europe.com ATC Asia

86-755-2396-8759 • sales@atceramics-asia.com

ATC 800 C Capacitors: Non-Magnetic Mechanical Configurations

ATC 800 C Capacitors: Mechanical Configurations

Custom lead styles and lengths are available; consult factory. All leads are high purity silver attached with high temperature solder and are RoHS compliant.

ATC

SERIES

& CASE

SIZE

ATC

TERM.

CODE

CASE SIZE

& TYPE

OUTLINES

W/T IS A

TERMINATION SURFACE

BODY DIMENSIONS

INCHES (mm) LEAD AND TERMINATION

DIMENSIONS AND MATERIALS

LENGTH

(L) WIDTH

(W) THICKNESS

(T) OVERLAP

(Y) MATERIALS

800C TN C Non-Mag

Solderable Barrier

.230

+.025 -.010

(5.84

+0.64

-0.25)

.250 ±.015

(6.35 ±0.38) .175 (4.45)

max. .040 (1.02)

max.

RoHS Compliant

Tin Plated over

Non-Magnetic Barrier

Termination

800C MN

Non-Mag

Microstrip

245 ±.025

(6.22 ±0.64)

High Purity Silver Leads

LL= .500 (12.7) min.

WL= .240 ±.005 (6.10 ±.127)

TL= .004 ±.001 (.102 ±.025)

Leads are Attached with

High Temperature Solder.

800C AN

Non-Mag

Axial Ribbon

245 ±.025

(6.22 ±0.64)

Silver Leads

LL= .500 (12.7) min.

WL= **See below

TL= .004 ±.001 (.102 ±.025)

ATC

SERIES

& CASE

SIZE

ATC

TERM.

CODE

CASE SIZE

& TYPE

OUTLINES

W/T IS A

TERMINATION SURFACE

BODY DIMENSIONS

INCHES (mm) LEAD AND TERMINATION

DIMENSIONS AND MATERIALS

LENGTH

(L) WIDTH

(W) THICKNESS

(T) OVERLAP

(Y) MATERIALS

800C T C

Solderable Barrier

.230

+.025 -.010

(5.84

+0.64

-0.25)

.250 ±.015

(6.35 ±0.38) .175 (4.45)

max. .040 (1.02)

max.

RoHS Compliant

Tin Plated over

Nickel Barrier Termination

800C MS

Microstrip

245 ±.025

(6.22 ±0.64)

High Purity Silver Leads

LL= .500 (12.7) min.

WL= .240 ±.005 (6.10 ±.127)

TL= .004 ±.001 (.102 ±.025)

Leads are Attached with

High Temperature Solder.

800C AR

Axial Ribbon

Silver Leads

LL= .500 (12.7) min.

WL= **See below

TL= .004 ±.001 (.102 ±.025)

Custom lead styles and lengths are available; consult factory. All leads are high purity silver attached with high temperature solder and are RoHS compliant.

**WL= .110 (2.79) for capacitance values

≤

680 pF; WL= .130 (3.30) for capacitance values > 680 pF

ATC 800 C Performance Data

8.2 pF

10 pF

18 pF

39 pF

1500 pF

2700 pF

100

0001

00110

800 C ESR vs. Frequency

Frequency (MHz)

ESR (MilliOhms)

AMERICAN TECHNICAL CERAMICS

www.atceramics.com

ATC North America

+1-631-622-4700 • sales@atceramics.com ATC Europe

+46 8 6800410 • sales@atceramics-europe.com ATC Asia

86-755-2396-8759 • sales@atceramics-asia.com

Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale (ATC

document #001-992 Rev. B; 12/05). Copies of these terms and conditions will be provided upon request. They may also be viewed on ATC's website at

www.atceramics.com/productfinder/default.asp. Click on the link for Terms and Conditions of Sale.

ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any

infringements of rights of third parties which may result from its use. ATC reserves the right to revise the content or modify its product without prior notice.

Suggested Mounting Pad Dimensions