1
01-2019, Rev. 0119
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
SCHRACK
General Purpose
Low Power PCB Relays
Miniature Power PCB Relay PB
n 1pole 10A, 1 form C (CO) or 1 form A (NO)
n Environmentally-friendly cadmium-free contacts
n Class F coil system standard
n Compact and simple design gives high process security
n Product in accordance to IEC 60335-1
Typical applications
White goods, small home appliances, heating temperature controllers.
Approvals
VDE Cert. No. 40008364, UL E214025
Technical data of approved types on request.
Contact Data
Contact arrangement 1 form C (CO) or 1 form A (NO)
Rated voltage 250VAC
Max. switching voltage 400VAC
Rated current 10A
Limiting making current, max 4 s, duty factor 10% 15A
Breaking capacity max. 2500VA
Contact material AgNi 90/10, AgSnO2
Frequency of operation, with/without load 360/36000h-1
Operate/release time max. 10/20ms
Bounce time max., form A/form B 10/15ms
Contact ratings
Type Contact Load Cycles
IEC 61810
PB114; PB113 A/B (NO/NC) 10A/3A, 250VAC, cosφ=1, 85°C 30x103
PB114; PB514 A of C 10A, 250VAC, cosφ=1, 85°C 30x103
PB134; PB133 A (NO) 10A, 250VAC, cosφ=1, 85°C 20x103
PB134 A (NO) 6.5A, 440VAC, cosφ=1, 85°C 50x103
PB634 A (NO) 10A, 250VAC, cosφ=1, 85°C 100x103
UL 508
PB1x4 A (NO) 10A, 250VAC, cosφ=1, 85°C 20x103
PB113 A (NO) 10A, 250VAC GP, 85°C 6x103
PB5x4 A (NO) 10A, 250VAC GP, 85°C 20x103
PB634 A (NO) 10A, 250VAC GP, 85°C 100x103
Mechanical endurance, DC coil 5x106 operations
Coil Data PB1 PB5 PB6
Coil voltage range 5 to 48 VDC 5 to 24 VDC 5 to 36 VDC
Operative range, IEC 61810 2 2 2
Coil versions, DC coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10% mW
Coil versions, DC-coil, 360mW
005 5 3.75 0.5 70 357
006 6 4.50 0.6 100 360
009 9 6.75 0.9 225 360
012 12 9.00 1.2 400 360
018 18 13.50 1.8 900 360
022 22 16.50 2.2 1344 360
024 24 18.00 2.4 1600 360
048 48 36.00 4.8 6400 360
Coil versions, DC-coil, 500mW
005 5 3.75 0.5 48 521
006 6 4.5 0.6 69 522
012 12 9 1.2 274 526
024 24 18 2.4 1097 525
036 36 27 3.6 2592 500
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Other coil voltages on request.
Insulation Data
Initial dielectric strength
between open contacts 1000Vrms
between contact and coil 2500Vrms
Clearance/creepage
between contact and coil
form C (CO) version ≥3/4mm
form A (NO) version ≥4/5mm
Material group of insulation parts IIIa
Tracking index of relay base PTI250
Z
(typical values for PB134)
2
01-2019, Rev. 0119
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
SCHRACK
General Purpose
Low Power PCB Relays
Miniature Power PCB Relay PB (Continued)
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Resistance to heat and fire
version PB1, PB5 according EN60335, par.30
Ambient temperature, DC coil -40 to +85°C
Category of environmental protection
IEC 61810 RTII - flux proof
Vibration resistance (functional), form A/form B, 30 to 400Hz
PB1, PB6 >10/4g
PB5 >10/6 g
Shock resistance (destructive) >100g
Terminal type PCB-THT
Weight 5.4g
Resistance to soldering heat THT
IEC 60068-2-20 270°C/10s
Packaging/unit tube/35 pcs., box/1050 pcs.
PCB layout1) / terminal assignment
Bottom view on solder pins
Dimensions
1) Layout note:
No openings (e.g. holes, slots, cut outs, unused pins, open through
connections, etc.) allowed under the relay base. The relay base must be
fully covered by the PCB, recommended minimum distance between the
relay and the edge of the printed circuit board is 5 mm.
For more information, please contact our application support.
Product code structure Typical product code PB 1 1 4 012
Type
PB Miniature Power PCB Relay PB
Version
1 Standard version 5 500 mW version
6 High performance version (form A version only)
Contact arrangement
1 1 form C contact (1 CO) 3 1 form A contact (1 NO)
Contact material
3 AgSnO2 4 AgNi 90/10
Coil
Coil code: please refer to coil versions table
Product code Version Contacts Contact material Coil Part number
PB113009 Standard 1 form C AgSnO 9VDC 6-1415535-8
PB113012 class F 1 CO contact 12VDC 6-1415535-9
PB113024 24VDC 2-1415543-0
PB114005 AgNi 90/10 5VDC 6-1415029-1
PB114006 6VDC 7-1415029-1
PB114012 12VDC 8-1415029-1
PB114024 24VDC 9-1415029-1
PB134005 1 form A 5VDC 1415030-1
PB134006 1 NO contact 6VDC 1-1415030-1
PB134012 12VDC 2-1415030-1
PB134024 24VDC 3-1415030-1
PB514012 500 mW 1 form C 12VDC 2-1415538-5
PB514024 version 1 CO contact 24VDC 5-1415535-6
PB634005 High 1 form A 5VDC 3-1415541-8
PB634006 performance 1 NO contact 6VDC 3-1415541-9
PB634009 version 9VDC 4-1415541-0
PB634012 12VDC 4-1415541-1
PB634024 24VDC 4-1415541-2
PB634036 36VDC 4-1415541-3
