A Product Line of Diodes Incorporated Green ZX5T953G 100V PNP MEDIUM POWER TRANSISTOR IN SOT223 Features and Benefits Mechanical Data * * * * * * * * * * BVCEO > -100V IC = -5A Continuous Collector Current Low Saturation Voltage (-90mV max @-1A) RSAT = 60m for a low equivalent On-Resistance hFE specified up to -10A for a high gain hold up Lead-Free Finish; RoHS compliant (Note 1) Halogen and Antimony Free. "Green" Device (Note 2) Qualified to AEC-Q101 Standards for High Reliability * * * Case: SOT223 Case material: Molded Plastic. "Green" Molding Compound. UL Flammability Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Matte Tin Finish annealed over Copper leadframe Weight: 0.112 grams (Approximate) Applications * * * * Motor driving Line switching High side switches Subscriber line interface cards (SLIC) SOT223 C B E Top View Top View Pin-Out Device Symbol Ordering Information (Note 3 & 4) Product ZX5T953GTA ZX5T953GQTA Notes: Grade Commercial Automotive Marking X5T953 X5T953 Reel size (inches) 7 7 Tape width (mm) 12 12 Quantity per reel 1,000 1,000 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied. 2. Halogen and Antimony free "Green" products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 3. For packaging details, go to our website at http://www.diodes.com. 4. Products with Q-suffix are automotive grade. Automotive products are electrical and thermal the same as the commercial, except where specified. Marking Information X5T953 = Product type Marking Code ZX5T953G Datasheet Number: DS33425 Rev. 3 - 2 1 of 6 www.diodes.com April 2011 (c) Diodes Incorporated A Product Line of Diodes Incorporated ZX5T953G Maximum Ratings @TA = 25C unless otherwise specified Characteristic Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Continuous Collector Current (Note 5) Peak Pulse Current Symbol VCBO VCEO VEBO IC ICM Value -140 -100 -7 -5 -10 Unit V V V A A Value 3.0 24 1.6 12.8 42 78 10.48 -55 to +150 Unit Thermal Characteristics @TA = 25C unless otherwise specified Characteristic Symbol (Note 5) Power Dissipation Linear derating factor PD (Note 6) (Note 5) (Note 6) (Note 7) Thermal Resistance, Junction to Ambient Thermal Resistance Junction to Lead Operating and Storage Temperature Range Notes: RJA RJA RJL TJ, TSTG W mW /C C/W C 5. For a device surface mounted on 52mm x 52mm x 1.6mm FR4 PCB with high coverage of single sided 2oz copper, in still air conditions; the device is measured when operating in a steady-state condition. 6. Same as note (5), except the device is surface mounted on 25mm x 25mm with 1oz copper. 7. Thermal resistance from junction to solder-point (at the end of the collector lead). 10 VCE(sat) Limit 1 DC 1s 100ms 100m 10ms Single Pulse. T amb=25C 10m 100m 52mmX52mm FR4 2oz Cu 1ms 100s 1 10 100 -VCE Collector-Emitter Voltage (V) Max Power Dissipation (W) -IC Collector Current (A) Typical Thermal Characteristics 3.0 2.5 52mmX52mm FR4 2oz Cu 2.0 1.5 1.0 0.5 25mmX25mm FR4 1oz Cu 0.0 0 20 30 D=0.5 20 Single Pulse D=0.05 D=0.1 1m 10m 100m 1 10 100 Pulse Width (s) 1k Max Power Dissipation (W) Thermal Resistance (C/W) 2oz Cu 0 100 Datasheet Number: DS33425 Rev. 3 - 2 100 120 140 160 Single Pulse. T amb=25C 52mmX52mm FR4 2oz Cu 100 10 1 100 Transient Thermal Impedance ZX5T953G 80 Derating Curve 40 52mmX52mm FR4 10 60 Temperature (C) Safe Operating Area D=0.2 40 2 of 6 www.diodes.com 1m 10m 100m 1 10 100 1k Pulse Width (s) Pulse Power Dissipation April 2011 (c) Diodes Incorporated A Product Line of Diodes Incorporated ZX5T953G Electrical Characteristics @TA = 25C unless otherwise specified Characteristic Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Collector-Emitter Breakdown Voltage (Note 8) Emitter-Base Breakdown Voltage Collector-Base Cutoff Current Collector-Emitter Cutoff Current Emitter Cutoff Current Symbol BVCBO BVCER BVCEO BVEBO Min -140 -140 -100 -7 ICBO - ICER R 1k IEBO - Typ -160 -160 -115 -8.1 <1 - Max -20 -0.5 Unit V V V V <1 <1 250 200 50 30 5 -20 -70 -120 -240 -985 -920 42 -20 -0.5 -10 300 -30 -90 -150 -340 -1100 -1050 - nA A nA nA A Collector-Emitter Saturation Voltage (Note 8) VCE(sat) Base-Emitter Saturation Voltage (Note 8) Base-Emitter Turn-On Voltage (Note 8) Output Capacitance (Note 8) VBE(sat) VBE(on) Cobo 100 100 25 15 - Transition Frequency fT - 125 - MHz Switching Time ton toff - 42 540 - ns Static Forward Current Transfer Ratio (Note 8) Notes: hFE - mV mV mV pF Test Condition IC = -100A IC = -1A, RB 1k IC = -10mA IE = -100A VCB = -100V VCB = -100V, TA = 100C VCB = -100V VCB = -100V, TA = 100C VEB = -6V IC = -10mA, VCE = -1V IC = -1A, VCE = -1V IC = -3A, VCE = -1V IC = -4A, VCE = -1V IC = -10A, VCE = -1V IC = -100mA, IB = -10mA IC = -1A, IB = -100mA IC = -2A, IB = -200mA IC = -4A, IB = -400mA IC = -4A, IB = -400mV IC = -4A, VCE = -2V VCB = -10V. f = 1MHz VCE = -10V, IC = -100mA f = 50MHz VCC = -10V, IC = -1A IB1 = IB2 = -100mA 8. Measured under pulsed conditions. Pulse width 300s. Duty cycle 2% ZX5T953G Datasheet Number: DS33425 Rev. 3 - 2 3 of 6 www.diodes.com April 2011 (c) Diodes Incorporated A Product Line of Diodes Incorporated ZX5T953G Typical Electrical Characteristics 0.6 1 IC/IB=50 0.5 IC/IB=20 0.4 - VCE(SAT) (V) - VCE(SAT) (V) Tamb=25C 100m IC/IB=10 0.3 100C 0.2 25C 0.1 IC/IB=10 10m 1m 10m 100m 1 - IC Collector Current (A) -55C 0.0 1m 10 10m 100m 1 10 1 10 - IC Collector Current (A) VCE(SAT) v IC VCE(SAT) v IC 250 1.4 1.0 0.8 150 25C 100 0.6 0.4 -55C 50 0.2 0.0 1m 10m 100m 1 - IC Collector Current (A) 0 10 - VBE(SAT) (V) 200 1.2 Typical Gain (hFE) 100C Normalised Gain 1.2 IC/IB=10 VCE=2V 1.0 0.8 -55C 25C 0.6 100C 0.4 1m hFE v IC 10m 100m - IC Collector Current (A) VBE(SAT) v IC 1.4 - VBE(ON) (V) 1.2 VCE=2V 1.0 -55C 25C 0.8 0.6 0.4 1m 100C 10m 100m 1 - IC Collector Current (A) 10 VBE(ON) v IC ZX5T953G Datasheet Number: DS33425 Rev. 3 - 2 4 of 6 www.diodes.com April 2011 (c) Diodes Incorporated A Product Line of Diodes Incorporated ZX5T953G Package Outline Dimensions SOT223 Dim Min Max Typ A 1.55 1.65 1.60 A1 0.010 0.15 0.05 b1 2.90 3.10 3.00 b2 0.60 0.80 0.70 C 0.20 0.30 0.25 D 6.45 6.55 6.50 E 3.45 3.55 3.50 E1 6.90 7.10 7.00 e -- -- 4.60 e1 -- -- 2.30 L 0.85 1.05 0.95 Q 0.84 0.94 0.89 All Dimensions in mm A A1 Suggested Pad Layout X1 Y1 C1 Y2 Dimensions X1 X2 Y1 Y2 C1 C2 Value (in mm) 3.3 1.2 1.6 1.6 6.4 2.3 C2 X2 ZX5T953G Datasheet Number: DS33425 Rev. 3 - 2 5 of 6 www.diodes.com April 2011 (c) Diodes Incorporated A Product Line of Diodes Incorporated ZX5T953G IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright (c) 2012, Diodes Incorporated www.diodes.com ZX5T953G Datasheet Number: DS33425 Rev. 3 - 2 6 of 6 www.diodes.com April 2011 (c) Diodes Incorporated