MADR-009190-000DIE - M/A-COM Technology Solutions, Inc. - Datasheet.Directory

Quad Driver for GaAs FET or PIN Diode

Switches and Attenuators

Rev. 4

MADR-009190-000100

1

• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

• India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and product information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Features

• High Voltage CMOS Technology

• Four Channel

• Positive Voltage Control

• CMOS device using TTL input levels

• Low Power Dissipation

• Low Cost Lead-Free SOIC-16 Plastic Package

• Halogen-Free “Green” Mold Compound

• RoHS* Compliant and 260°C Reflow Compatible

Description

The MADR-009190-000100 is a four channel driver

used to translate TTL control inputs into gate control

voltages for GaAs FET microwave switches and

attenuators. High speed analog CMOS technology

is utilized to achieve low power dissipation at

moderate to high speeds, encompassing most

microwave switching applications. The output HIGH

level is optionally 0 to +2.0V (relative to GND) to

optimize the intermodulation products of FET control

devices at low frequencies. For driving PIN Diode

circuits, the outputs are nominally switched between

+5V & -5V. The actual driver output voltages will be

lower when driving large currents due to the resis-

tance of the output devices.

Ordering Information1

Part Number Package

MADR-009190-000100 Bulk Packaging

MADR-009190-000DIE Die 2

MADR-009190-0001TR 1000 piece reel

Functional Schematic

Pin Configuration 3

* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.

1. Reference Application Note M513 for reel size information.

2. Die sales are available in waffle packs in increments of 100

pieces.

Pin No. Function Pin No. Function

1 VEE 9 Output A1

2 VCC 10 Output B1

3 C4 11 Output A2

4 C3 12 Output B2

5 C2 13 Output A3

6 C1 14 Output B3

7 VOPT 15 Output A4

8 Ground 16 Output B4

3. The bottom of the die should be isolated for part number

MADR-009190-000DIE.

Quad Driver for GaAs FET or PIN Diode

Switches and Attenuators

Rev. 4

MADR-009190-000100

2

• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

• India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and product information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Guaranteed Operating Ranges (for driving FET or PIN devices) 4,5,8

Symbol Parameter Unit Min. Typ. Max.

VCC Positive DC Supply Voltage V 4.5 5.0 5.5

VEE Negative DC Supply Voltage V -10.5 -5.0 -4.5

VOPT 6,7 Optional DC Output Supply Voltage V 0 — VCC

VOPT - VEE Negative Supply Voltage Range V 4.5 Note 6,7 16.0

VCC - VEE Positive to negative Supply Range V 9.0 10.0 16.0

TOPER Operating Temperature °C -40 +25 +85

IOH DC Output Current - High mA -35 — —

IOL DC Output Current - Low mA — — 35

Trise, Tfall Maximum Input Rise or Fall Time ns — — 500

4. Unused logic inputs must be tied to either GND or VCC.

5. All voltages are relative to GND.

6. VOPT is grounded in most cases when FETs are driven. To improve the intermodulation performance and the 1 dB compression point of

GaAs control devices at low frequencies, VOPT can be increased to between 1.0 and 2.0V. The nonlinear characteristics of the GaAs

control devices will approximate performance at 500 MHz. It should be noted that the control current that is on the GaAs MMICs will

increase when positive controls are applied.

7. When this driver is used to drive PIN diodes, VOPT is often set to +5.0V, with VEE set to -5.0V.

8. 0.01 uF decoupling capacitors are required on the power supply lines.

Truth Table

Input

Cn An Bn

Logic “0” VEE VOPT

Logic “1” VOPT VEE

Outputs

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

Silicon Integrated Circuits are sensitive to

electrostatic discharge (ESD) and can be damaged

by static electricity. Proper ESD control techniques

should be used when handling these devices.

Quad Driver for GaAs FET or PIN Diode

Switches and Attenuators

Rev. 4

MADR-009190-000100

3

• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

• India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and product information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

DC Characteristics over Guaranteed Operating Range

Symbol Parameter Test Conditions Units Min. Typ. Max.

VIH Input High Voltage Guaranteed High Input Voltage V 2.0 — —

VIL Input Low Voltage Guaranteed Low Input Voltage V — — 0.8

VOH Output High Voltage IOH = -0.5 mA V VOPT - 0.1 — —

VOL Output Low Voltage IOL = 0.5 mA V — — VEE + 0.1

IIN Input Leakage Current (per

Input)

VIN = VCC or GND, VEE = min,

VCC = max, VOPT = min or max nA -250 — 250

IOH DC Output Current—High

(per Output)

VCC = 5.0V, VEE = -5.0V,

VOPT = 5.0V mA -35 — —

IOL DC Output Current—Low

(per Output)

VCC = 5.0V, VEE = -5.0V,

VOPT = 5.0V mA — — 35

IOH_SPIKE

Peak Spike Output Current

(Rising Edge)

(per Output)

VCC = 5.0V, VEE = -5.0V,

VOPT = 5.0V, CL = 25 pF mA — 35 —

IOL_SPIKE

Peak Spike Output Current

(Falling Edge)

(per Output)

VCC = 5.0V, VEE = -5.0V,

VOPT = 5.0V, CL = 25 pF mA — 50 —

ICC Quiescent Supply Current

VIN = VCC or GND, VEE = -10.5V,

VCC = 5.5V, VOPT = 5.5V,

No Output Load

µA — — 20

 ICC Additional Supply Current

(per TTL Input pin) VCC= max, VIN = VCC -2.1V mA — — 1.0

IEE Quiescent Supply Current

VIN = VCC or GND, VEE = -10.5V,

VCC = 5.5V, VOPT = 5.5V,

No Output Load

µA — — 20

IOPT Quiescent Supply Current

VIN = VCC or GND, VEE = -10.5V,

VCC = 5.5V, VOPT = 5.5V,

No Output Load

µA — — 20

RNFET Output Resistance NFET On

(to VEE)

VCC = 5.0V, VEE = -5.0V,

VOPT = 5.0V, VOUT = -4.9V

+25°C, Note 9

 — 40 —

RPFET Output Resistance PFET On

(to VOPT)

VCC = 5.0V, VEE = -5.0V,

VOPT = 5.0V, VOUT = 4.9V

+25°C, Note 9

 — 45 —

9. See plot of RNFET and RPFET for variations over temperature for driving 4.99k and 82 ohm resistive load. (Note that this corresponds to 1 mA

and 33 mA currents at 25°).

Quad Driver for GaAs FET or PIN Diode

Switches and Attenuators

Rev. 4

MADR-009190-000100

4

• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

• India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and product information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Symbol Parameter -40°C +25°C +85°C Unit

TPLH Propagation Delay 20 22 25 ns

TPHL Propagation Delay 20 22 25 ns

TTLH Output Transition Time (Rising Edge) 5 6 8 ns

TTHL Output Transition Time (Falling Edge) 5 6 8 ns

Tskew Delay Skew 2 2 2 ns

CIN Input Capacitance 5 5 5 pF

CPDC Power Dissipation Capacitance 11 50 50 50 pF

CPDE Power Dissipation Capacitance 11 100 100 100 pF

Typical performance

PRF (max) 50% Duty Cycle DC — 10 MHz

AC Characteristics Over Guaranteed Operating Range 10

10. VCC = 4.5V, VOPT = 0V, VEE = min or max, CL = 25 pF, input LOGIC1 = 3V, LOGIC0 = 0V, Trise, Tfall = 6 ns.

11. Total Power Dissipation is calculated by the following formula: PD = VCC2fC PDC + VEE2fCPDE

Switching Waveforms

1.3V

10%

90%

TrTf

TPLH TPHL

TSKEW TSKEW

50%

TTLH TTHL

90%

10%

OUTPUT A

OUTPUT B

INPUT C

VIN

LOGIC 1

LOGIC 0

1.3V

90%

10%

50%

90%

10%

VOUT

OUTPUT

HIGH

OUTPUT

LOW

Output Resistance vs. Temperature12

12. Output resistance were measured under the condition of

VCC = 5.0V, VOPT = 5.0V, and VEE = -5.0V, with load resistors

from outputs to ground.

20.0

40.0

60.0

80.0

100.0

120.0

-55.0 -25.0 5.0 35.0 65.0 95.0 125.0

Temperature ( C)

Resistance (O hm s)

PFET with 82 load

NFET with 82 load

PFET with 4.99k load

NFET with 4.99k load

Quad Driver for GaAs FET or PIN Diode

Switches and Attenuators

Rev. 4

MADR-009190-000100

5

• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

• India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and product information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Absolute Maximum Ratings13

Symbol Parameter Min Max Unit

VCC Positive DC Supply Voltage -0.5 7.0 V

ICC Positive DC Supply Current (-0.5V  VIN  0.8V; 2.0V 

VIN  VCC + 0.5V; VCC - VIN  7.0V )

— 20 mA

VEE Negative DC Supply Voltage -11.0 0.5 V

IEE Negative DC Supply Current (per Output) 14 -50 — mA

VOPT Optional DC Output Supply Voltage -0.5 VCC +0.5 V

IOPT Optional DC Output Supply Current (per Output) 14 — 50 V

VOPT - VEE Output to Negative Supply Voltage Range -0.5 18.0 V

VCC - VEE Positive to Negative Supply Voltage Range -0.5 18.0 V

VIN DC Input Voltage -0.5

Note 15

VCC +0.5 V

VO DC Output Voltage VEE – 0.5 VOPT + 0.5 V

PD

16 Power Dissipation in Still Air — 500 mW

TOPER Operating Temperature -55 125 °C

TSTG Storage Temperature -65 150 °C

ESD ESD Sensitivity 2.0 — kV

13. All voltages are referenced to GND. All inputs and outputs incorporate latch-up protection structures.

14. The maximum IEE and IOPT are specified under the condition of VCC = 5.5V, VEE = -5.5V, VOPT = 5.5V, and the total power dissipation is

within 500 mW in still air.

15. If VCC  6.5V, then the minimum for VIN is VCC - 7.0V.

16. Derate -7 mW/°C from 65°C to 85°C.

Quad Driver for GaAs FET or PIN Diode

Switches and Attenuators

Rev. 4

MADR-009190-000100

6

• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

• India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and product information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Equivalent Output Circuit for An and Bn Outputs (33 mA load at 25°)

Typical Application for a SPDT Switch 17,18

17. Note that the description of the above circuit is on the following page.

18. Only one section of MADR-009190-000100 is shown. The other three sections will have equivalent performance.

PFET

62 ohms

Vopt

NFET

67 ohms

Vee

An and Bn

Outputs

Quad Driver for GaAs FET or PIN Diode

Switches and Attenuators

Rev. 4

MADR-009190-000100

7

• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

• India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and product information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Description of Circuit

The MADR-009190-000100 provides four pairs of complementary outputs that are each capable of driving a

maximum of ± 35 mA into a load. In addition, with proper capacitor selection (C3 & C4) used in parallel with

the current setting resistor (R1 & R2), additional spiking current can be achieved.

To achieve the Non-Inverting and Inverting complementary voltages, each output is switched between two

internal FETs. The FETs are connected to VOPT for the positive output and VEE for the negative output. VOPT

and VEE are adjustable for various configurations and have the following limitations: VEE can be no more nega-

tive than –10.5 volts; VOPT can be no more positive than +5.5 volts AND VOPT must always be less than or

equal to VCC. Increasing VOPT beyond VCC will prevent the device from switching states when commanded to

by the logic input. The most common configuration is to drive VEE at –5.0 volts with VCC and VOPT tied together

at +5.0 volts.

Lead-Free, SOIC-16†

† Reference Application Note M538 for lead-free solder reflow recommendations.

Plating is 100% matte tin over copper.

Quad Driver for GaAs FET or PIN Diode

Switches and Attenuators

Rev. 4

MADR-009190-000100

8

• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

• India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and product information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Die Outline Pad Configuration19,20

Die Size: 1325 x 1735 µm (nominal)

Pad

No. X (µm)

nominal Y (µm)

nominal Pad Size (µm)

X x Y

0 0 0 Lower left edge of die

1 482.95 1489 85 x 85

2 217.85 1534.6 85 x 85

3 200.45 1407.9 85 x 85

4 200.45 1114.2 85 x 85

5 200.45 820.45 85 x 85

6 200.45 526.8 85 x 85

7 200.45 229.35 85 x 85

8 395.6 157.95 85 x 85

17 1325 1735 Upper right edge of die

9 777.55 181.5 132 x 94

10 1126.35 181.75 132 x 94

11 1126.35 436.85 132 x 94

12 1126.35 691.95 132 x 94

13 1126.35 947.05 132 x 94

14 1126.35 1202.15 132 x 94

15 1126.35 1457.3 132 x 94

16 767.9 1553.5 132 x 94

19. All X,Y dimensions are at bond pad center.

20. Die thickness is 8.0 mils.