Datasheet Rev. HC1
Issued 2008/03
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical para-
meters, test conditions and
processing information
only to be used together
with the 'Definitions' at
schrackrelays.com in the
‘Schrack’ section.
Specifications subject to
change.
General Purpose Relays
1
SCHRACK
Miniature Power PCB Relay PB
I1pole 10 A, 1 CO or 1 NO contact
IEnvironmentally-friendly cadmium-free contacts
IClass F coil system standard
ICompact and simple design gives high process security
IProduct in accordance to IEC60335-1
IRoHS compliant (Directive 2002/95/EC)
as per product date code 0346
Applications
White goods, small home appliances, heating temperature
controllers
F0224-A
Approvals
VREG.-Nr. 121560, ZE214025
Technical data of approved types on request
Contact data
Contact configuration 1 CO or 1 NO contact
Contact set single contact
Type of interruption micro-disconnection
Rated current 10 A
Rated voltage / max.switching voltage AC 250/400 VAC
Maximum breaking capacity AC 2500 VA
Limiting making capacity, max 4 s, duty factor 10% 15 A
Contact material AgNi 90/10, AgSnO2
Mechanical endurance 5x106cycles
Rated frequency of operation with / without load 6/600 min-1
Contact ratings
Type Load Cycles
PB114 10 A/3 A, 250 VAC, 85°C, resistive, 50Hz, EN61810-1 30x103
PB114 (NO tested), 10 A, 250 VAC, 85°C, resistive, 50Hz, EN61810-1 30x103
PB114 10 A/10 A, 250 VAC, 85°C, resistive, 50Hz, EN61810-1 1x103
PB133, PB134
10 A, 250 VAC, 85°C, resistive, 50Hz, EN61810-1 20x103
PB134 6.5 A, 250 VAC, 85°C, resistive, 50Hz, EN61810-1 100x103
PB634 10 A, 250 VAC, 85°C, resistive, 50Hz, EN61810-1 100x103
Coil data PB1.. PB5.., PB6..
Rated coil voltage range DC coil 5...48 VDC 5...24 VDC
Coil power DC coil typ. 360 mW typ. 500 mW
Operative range 2
Coil versions, DC-coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ohm mW
Coil versions, DC-coil, 360mW
005 5 3.75 0.5 70+10% 357
006 6 4.5 0.6 100+10% 360
009 9 6.75 0.9 225+10% 360
012 12 9.0 1.2 400+10% 360
018 18 13.5 1.8 900+10% 360
022 22 16.5 2.2 1344+10% 360
024 24 18.0 2.4 1600+10% 360
048 48 36 4.8 6400+10% 360
Coil versions, DC-coil, 500mW
005 5 3. 75 0.5 48+10% 521
006 6 4.5 0.6 69+10% 522
012 12 9 1.2 274+10% 526
024 24 18 2.4 1097+10% 525
All figures are given for coil without preenergization, at ambient temperature +23°C
Other coil voltages on request
Datasheet Rev. HC1
Issued 2008/03
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical para-
meters, test conditions and
processing information
only to be used together
with the 'Definitions' at
schrackrelays.com in the
‘Schrack’ section.
Specifications subject to
change.
General Purpose Relays
2
SCHRACK
Miniature Power PCB Relay PB (Continued)
Insulation
Dielectric strength coil-contact circuit 2500 Vrms
open contact circuit 1000 Vrms
Clearance / creepage coil-contact circuit CO version W3/4 mm
NO version W4/5 mm
Material group of insulation parts IIIa
Tracking index of relay base CTI 250
Insulation to IEC 60664-1
Type of insulation coil-contact circuit basic
open contact circuit functional
Rated insulation voltage 250 V
Pollution degree 3
Rated voltage system 230/400 V
Overvoltage category III
Other data PB1.., PB6.. PB5..
RoHS - Directive 2002/95/EC compliant as per product date code 0346
Flammability class according to UL94 V-0
For version PB1, PB5: GWFI to IEC 60695-2-12 W850°C
GWIT to IEC 60695-2-13 W775°C
Ambient temperature range -40...85°C
Operate- / release time < 20 ms
Bounce time NO / NC contact < 15 ms
Vibration resistance (function) NO / NC contact >10/4g >10/8g
30...400Hz 30...400Hz
Shock resistance (destruction) 100 g
Category of protection RTII - flux proof
Mounting pcb
Resistance to soldering heat 270°C / 10s
Relay weight 5.4 g
Packaging unit 35/1050 pcs
PCB layout 1) / terminal assignment
Bottom view on solder pins
Dimensions
S0407-AA
S0407-AB
S0406-A
S0407-AC
1) Layout note:
No openings (e.g. holes, slots, cutouts,
unused pins, open through connexions,
etc.) allowed under the relay base. The
relay base must be fully covered by the
pcb, recommended minimum distance
between the relay and the edge of the
printed circuit board is 5 mm.
For more information, please contact our
application support.
Datasheet Rev. HC1
Issued 2008/03
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical para-
meters, test conditions and
processing information
only to be used together
with the 'Definitions' at
schrackrelays.com in the
‘Schrack’ section.
Specifications subject to
change.
General Purpose Relays
3
SCHRACK
Miniature Power PCB Relay PB (Continued)
Product key PB
Type
Version
1standard version 6high performance version (NO version only)
5500 mW version
Contact configuration
11 CO contact 31 NO contact
Contact material
3AgSnO24AgNi 90/10
Coil
Coil code: please refer to coil versions table
Other types on request
Product key Version Contacts Contact material Coil Part number
PB114005 standard 1 CO contact AgNi 90/10 5 VDC 6-1415029-1
PB114006 class F 6 VDC 7-1415029-1
PB114012 12 VDC 8-1415029-1
PB114024 24 VDC 9-1415029-1
PB134005 1 NO contact 5 VDC 0-1415030-1
PB134006 6 VDC 1-1415030-1
PB134012 12 VDC 2-1415030-1
PB134024 24 VDC 3-1415030-1
PB514012 500 mW 1 CO contact 12 VDC 2-1415538-5
PB514024 version 24 VDC 5-1415535-6
PB634005 high 1 NO contact 5 VDC 3-1415541-8
PB634006 performance 6 VDC 3-1415541-9
PB634012 version 12 VDC 4-1415541-1
PB634024 24 VDC 4-1415541-2
