NL37WZ06 Triple Inverter with Open Drain Outputs The NL37WZ06 is a high performance triple inverter with open drain outputs operating from a 1.65 to 5.5 V supply. The internal circuit is composed of multiple stages, including an open drain output which provides the capability to set output switching level. This allows the NL37WZ06 to be used to interface 5 V circuits to circuits of any voltage between VCC and 7 V using an external resistor and power supply. * * * * * MARKING DIAGRAM 8 8 Features * * * * http://onsemi.com Extremely High Speed: tPD 2.5 ns (typical) at VCC = 5 V Designed for 1.65 V to 5.5 V VCC Operation Over Voltage Tolerant Inputs LVTTL Compatible - Interface Capability with 5 V TTL Logic with VCC = 3 V LVCMOS Compatible 24 mA Output Sink Capability @ 3.0 V Near Zero Static Supply Current Substantially Reduces System Power Requirements Chip Complexity: FET = 72 These Devices are Pb-Free and are RoHS Compliant 1 LF M G G US8 US SUFFIX CASE 493 1 LF M G = Device Code = Date Code* = Pb-Free Package (Note: Microdot may be in either location) *Date Code orientation may vary depending upon manufacturing location. PIN ASSIGNMENT IN A1 OUT Y3 IN A2 GND 1 8 2 7 3 6 4 5 1 VCC OUT Y1 IN A3 IN A1 2 OUT Y3 3 IN A2 4 GND 5 OUT Y2 6 IN A3 7 OUT Y1 8 VCC OUT Y2 FUNCTION TABLE A Input Figure 1. Pinout (Top View) L H Y Output Z L IN A1 1 OUT Y1 IN A2 1 OUT Y2 ORDERING INFORMATION IN A3 1 OUT Y3 See detailed ordering and shipping information in the package dimensions section on page 4 of this data sheet. Figure 2. Logic Symbol (c) Semiconductor Components Industries, LLC, 2012 April, 2012 - Rev. 6 1 Publication Order Number: NL37WZ06/D NL37WZ06 MAXIMUM RATINGS Symbol Parameter Value Unit VCC DC Supply Voltage -0.5 to +7.0 V VI DC Input Voltage -0.5 to )7.0 V VO DC Output Voltage -0.5 to )7.0 V IIK DC Input Diode Current VI < GND -50 mA IOK DC Output Diode Current VO < GND -50 mA IO DC Output Sink Current $50 mA ICC DC Supply Current per Supply Pin $100 mA IGND DC Ground Current per Ground Pin $100 mA TSTG Storage Temperature Range -65 to +150 C TL Lead Temperature, 1 mm from Case for 10 Seconds 260 C TJ Junction Temperature under Bias +150 C qJA Thermal Resistance 250 C/W PD Power Dissipation in Still Air at 85C 250 mW MSL Moisture Sensitivity FR Flammability Rating VESD ESD Withstand Voltage (Note 1) Level 1 Oxygen Index: 28 to 34 UL 94 V-0 @ 0.125 in Human Body Model (Note 2) Machine Model (Note 3) Charged Device Model (Note 4) > 2000 > 200 N/A V Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. Measured with minimum pad spacing on an FR4 board, using 10 mm-by-1 inch, 2-ounce copper trace with no air flow. 2. Tested to EIA/JESD22-A114-A. 3. Tested to EIA/JESD22-A115-A. 4. Tested to JESD22-C101-A. RECOMMENDED OPERATING CONDITIONS Symbol Parameter VCC Supply Voltage VI Input Voltage VO Output Voltage TA Operating Free-Air Temperature Dt/DV Input Transition Rise or Fall Rate Min Max Unit 1.65 1.5 5.5 5.5 V (Note 5) 0 5.5 V (HIGH or LOW State) 0 5.5 V -55 +125 C 0 0 0 20 10 5 ns/V Operating Data Retention Only VCC = 2.5 V $0.2 V VCC = 3.0 V $0.3 V VCC = 5.0 V $0.5 V 5. Unused inputs may not be left open. All inputs must be tied to a high- or low-logic input voltage level. http://onsemi.com 2 NL37WZ06 DC ELECTRICAL CHARACTERISTICS TA = 25C VCC Symbol Parameter Condition (V) Min 0.75 VCC 0.7 VCC -55C TA 125C Typ Max Min Max High-Level Input Voltage 1.65 2.3 to 5.5 VIL Low-Level Input Voltage 1.65 2.3 to 5.5 0.25 VCC 0.3 VCC 0.25 VCC 0.3 VCC V ILKG Z-State Output Leakage Current VIN = VIL VOUT = VCC or GND 1.65 to 5.5 5.0 10.0 mA VOL Low-Level Output Voltage VIN = VIH or VIL IOL = 100 mA 1.65 to 5.5 0.1 0.1 V IOL = 4 mA 1.65 0.45 0.45 IIN Input Leakage Current IOFF Power Off Leakage Current ICC Quiescent Supply Current 0.75 VCC 0.7 VCC Unit VIH V IOL = 8 mA 2.3 0.22 0.3 0.3 IOL = 12 mA 2.7 0.22 0.4 0.4 IOL = 16 mA 3.0 0.28 0.4 0.4 IOL = 24 mA 3.0 0.38 0.55 0.55 IOL = 32 mA 4.5 0.42 0.55 0.55 VIN = 5.5 V or GND 0 to 5.5 0.1 1.0 mA VIN = 5.5 V or VOUT = 5.5 V 0 1.0 10 mA VIN = 5.5 V or GND 5.5 1.0 10 mA IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIII IIIIII IIIIII IIIIIIII IIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIII IIIIIII II IIIIIIIII IIII III III II III IIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIII IIIIIII IIIIIIIII IIII III III II III IIII II IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIII IIIIIII II IIIIIIIII IIII III III II III IIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII AC ELECTRICAL CHARACTERISTICS tR = tF = 2.5 ns; CL = 50 pF; RL = 500 W TA = 25C Symbol tPZL tPLZ Parameter Propagation Delay (Figure 3 and 4) Propagation Delay (Figure 3 and 4) Min Typ -55C TA 125C Max Min Max Unit 7.2 ns Condition VCC (V) RL = R1= 500 W, CL = 50 pF 1.8 0.15 RL = R1= 500 W, CL = 50 pF 2.5 0.2 0.8 3.0 4.0 0.8 4.1 RL = R1= 500 W, CL = 50 pF 3.3 0.3 0.8 2.4 3.2 0.8 3.7 RL = R1= 500 W, CL = 50 pF 5.0 0.5 0.5 2.4 3.0 0.5 3.5 RL = R1= 500 W, CL = 50 pF 1.8 0.15 RL = R1= 500 W, CL = 50 pF 2.5 0.2 0.8 2.5 4.0 0.8 4.1 RL = R1= 500 W, CL = 50 pF 3.3 0.3 0.8 2.1 3.2 0.8 3.7 RL = R1= 500 W, CL = 50 pF 5.0 0.5 0.5 1.2 3.0 0.5 3.5 7.2 7.2 7.2 ns CAPACITIVE CHARACTERISTICS Symbol Parameter Condition Typical Unit CIN Input Capacitance VCC = 5.5 V, VI = 0 V or VCC 2.5 pF COUT Output Capacitance VCC = 5.5 V, VI = 0 V or VCC 4.0 pF CPD Power Dissipation Capacitance (Note 6) 10 MHz, VCC = 5.5 V, VI = 0 V or VCC 4.0 pF 6. CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC(OPR) = CPD VCC fin + ICC. CPD is used to determine the no-load dynamic power consumption; PD = CPD VCC2 fin + ICC VCC. http://onsemi.com 3 NL37WZ06 A VCC 50% tPZL Y GND tPLZ 50% VCC HIGH IMPEDANCE VOL +0.3 V Figure 3. Switching Waveforms VCC R1 PULSE GENERATOR DUT RT CL VCC x 2 RL RT = ZOUT of pulse generator (typically 50 W) Figure 4. Test Circuit DEVICE ORDERING INFORMATION Device Order Number NL37WZ06USG Package Shipping US8 (Pb-Free) 3000 / Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 4 NL37WZ06 PACKAGE DIMENSIONS US8 US SUFFIX CASE 493-02 ISSUE B -X- A 8 -Y- 5 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. DIMENSION "A" DOES NOT INCLUDE MOLD FLASH, PROTRUSION OR GATE BURR. MOLD FLASH. PROTRUSION AND GATE BURR SHALL NOT EXCEED 0.140 MM (0.0055") PER SIDE. 4. DIMENSION "B" DOES NOT INCLUDE INTER-LEAD FLASH OR PROTRUSION. INTER-LEAD FLASH AND PROTRUSION SHALL NOT E3XCEED 0.140 (0.0055") PER SIDE. 5. LEAD FINISH IS SOLDER PLATING WITH THICKNESS OF 0.0076-0.0203 MM. (300-800 "). 6. ALL TOLERANCE UNLESS OTHERWISE SPECIFIED 0.0508 (0.0002 "). J DETAIL E B L 1 4 R G P S U C -T- SEATING PLANE D 0.10 (0.004) M H 0.10 (0.004) T K N R 0.10 TYP T X Y V M F DETAIL E SOLDERING FOOTPRINT* DIM A B C D F G H J K L M N P R S U V MILLIMETERS MIN MAX 1.90 2.10 2.20 2.40 0.60 0.90 0.17 0.25 0.20 0.35 0.50 BSC 0.40 REF 0.10 0.18 0.00 0.10 3.00 3.20 0_ 6_ 5_ 10 _ 0.23 0.34 0.23 0.33 0.37 0.47 0.60 0.80 0.12 BSC INCHES MIN MAX 0.075 0.083 0.087 0.094 0.024 0.035 0.007 0.010 0.008 0.014 0.020 BSC 0.016 REF 0.004 0.007 0.000 0.004 0.118 0.126 0_ 6_ 5_ 10 _ 0.010 0.013 0.009 0.013 0.015 0.019 0.024 0.031 0.005 BSC 3.8 0.15 0.50 0.0197 1.8 0.07 0.30 0.012 1.0 0.0394 SCALE 8:1 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 http://onsemi.com 5 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NL37WZ06/D