© Semiconductor Components Industries, LLC, 2006
February, 2006 − Rev. 1 1Publication Order Number:
MUR210/D
MUR210
Preferred Device
SWITCHMODEt
Power Rectifier
SWITCHMODE power rectifiers are state−of−the−art devices that
are designed for use in switching power supplies, inverters and as free
wheeling diodes.
Features
•Ultrafast 20 Nanosecond Recovery Times
•175°C Operating Junction Temperature
•Low Forward Voltage
•Low Leakage Current
•High Temperature Glass Passivated Junction
•These are Pb−Free Devices*
Mechanical Characteristics
•Case: Epoxy, Molded
•Weight: 0.4 Gram (Approximately)
•Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
•Lead and Mounting Surface Temperature for Soldering Purposes:
220°C Max for 10 Seconds, 1/16″ from Case
•Polarity: Cathode Indicated by Polarity Band
MAXIMUM RATINGS
Rating Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
100
−V
Average Rectified Forward Current
(Square Wave Mounting Method #3)
(Note 1)
IF(AV) 2.0 @
TA = 100°CA
Non-Repetitive Peak Surge Current
(Surge applied at rated load conditions
halfwave, single phase, 60 Hz)
IFSM 35 A
Operating Junction Temperature and
Storage Temperature Range TJ, Tstg −65 to +175 °C
THERMAL CHARACTERISTICS
Characteristic Symbol Value Unit
Maximum Thermal Resistance,
Junction−to−Ambient RqJA See Note 3 °C/W
Maximum ratings are those values beyond which device damage can occur.
Maximum ratings applied to the device are individual stress limit values (not
normal operating conditions) and are not valid simultaneously. If these limits are
exceeded, device functional operation is not implied, damage may occur and
reliability may be affected.
1. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤2.0%.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
Device Package Shipping†
ORDERING INFORMATION
DO−41
PLASTIC
AXIAL LEAD
CASE 59
MUR210RL Axial Lead* 5000/Tape & Reel
MUR210 Axial Lead* 1000 Units/Bag
ULTRAFAST RECTIFIERS
2 AMPERES, 100 VOLTS
Preferred devices are recommended choices for future use
and best overall value.
MARKING DIAGRAM
http://onsemi.com
MUR210RLG Axial Lead* 5000/Tape & Reel
MUR210G Axial Lead* 1000 Units/Bag
A = Assembly Location
Y = Year
WW = Work Week
G= Pb−Free Package
(Note: Microdot may be in either location)
A
MUR210
YYWW G
G
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
s
Brochure, BRD8011/D.
*This package is inherently Pb−Free.
MUR210
http://onsemi.com
2
ELECTRICAL CHARACTERISTICS
Characteristic Symbol Value Unit
Maximum Instantaneous Forward Voltage (Note 2)
(IF = 2.0 A, TJ = 150°C)
(IF = 2.0 A, TJ = 25°C)
VF0.74
0.94
V
Maximum Instantaneous Reverse Current (Note 2)
(Rated DC Voltage, TJ = 150°C)
(Rated DC Voltage, TJ = 25°C)
iR50
2.0
mA
Maximum Reverse Recovery Time
(IF = 1.0 A, di/dt = 50 A/ms)
(IF = 0.5 A, IR = 1.0 A, IREC = 0.25 A)
trr 30
20
ns
Maximum Forward Recovery Time
(IF = 1.0 A, di/dt = 100 A/ms, IREC to 1.0 V) tfr 20 ns
2. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤2.0%.
0.3
10
1.10.90.7
1
0.1 0.5 1.3
Figure 1. Maximum Forward Voltage
VF, INSTANTANEOUS VOLTAGE (VOLTS)
I
F
, INSTANTANEOUS FORWARD CURRENT (AMPS)
VF @ 25°C
VF @ 100°C
VF @ 175°C
0.3
10
1.10.90.7
1
0.1 0.5 1.
3
IF, INSTANTANEOUS FORWARD CURRENT (AMPS)
VF, INSTANTANEOUS VOLTAGE (VOLTS)
Figure 2. Typical Forward Voltage
VF @ 25°C
VF @ 100°C
VF @ 175°C
MUR210
http://onsemi.com
3
Ir @ 25°C
Ir @ 175°C
Ir @ 100°C
1.5
0.5
2.0
0.0
1.0
2.5
1
4
50
0
3
1000 150
TA, AMBIENT TEMPERATURE (°C)
IF(AV), AVERAGE FORWARD
2
IF(AV), AVERAGE FORWARD CURRENT
PF(AV), AVERAGE POWER DISSIPATION
(WATTS)
5
200 0.0 2.0 2.51.51.0 3
.0
0.5
dc
Square Wave dc
Square Wave
50
40
30
20
10
0
VR, REVERSE VOLTAGE (VOLTS)
C, CAPACITANCE (pF)
20 301004050
TJ = 25°C
VR, REVERSE VOLTAGE (VOLTS)
C, CAPACITANCE (pF)
50
40
30
20
10
020 30100405
0
TJ = 25°C
10
VR, REVERSE VOLTAGE (VOLTS)
IR, REVERSE CURRENT (mA)
0 50 75 10025
0.1
100
1
1000 100.000
10.000
1.000
0.100
0.010
0.001
VR, REVERSE VOLTAGE (VOLTS)
IR, REVERSE CURRENT (mA)
50 7525010
0
Ir @ 25°C
Ir @ 175°C
Ir @ 100°C
Figure 3. Maximum Reverse Current Figure 4. Typical Reverse Current
Figure 5. Current Derating Figure 6. Power Dissipation
Figure 7. Maximum Capacitance Figure 8. Typical Capacitance
TJ = 175°C TJ = 175°C
MUR210
http://onsemi.com
4
Lead Length, L
Mounting
Method 1/8 1/4 1/2 Units
1
2
3
52
67
RqJA
65 72
80 87
50
°C/W
°C/W
°C/W
TYPICAL VALUES FOR RqJA IN STILL AIR
Data shown for thermal resistance junction to
ambient (RqJA) for the mountings shown is to be
used as typical guideline values for preliminary
engineering or in case the tie point temperature
cannot be measured.
NOTE 3 − AMBIENT MOUNTING DATA
MOUNTING METHOD 1
MOUNTING METHOD 2
MOUNTING METHOD 3
ÉÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉÉ
L L
ÉÉÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉÉÉ
L L
Vector Pin Mounting
ÉÉ
ÉÉ
ÉÉ
ÉÉ
ÉÉ
ÉÉ
ÉÉ
L = 3/8
Board Ground Plane
P.C. Board with
1−1/2 X 1−1/2 Copper Surface″″
″
MUR210
http://onsemi.com
5
PACKAGE DIMENSIONS
B
D
K
K
F
F
A
DIM MIN MAX MIN MAX
MILLIMETERSINCHES
A4.10 5.200.161 0.205
B2.00 2.700.079 0.106
D0.71 0.860.028 0.034
F−−− 1.27−−− 0.050
K25.40 −−−1.000 −−−
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. ALL RULES AND NOTES ASSOCIATED WITH
JEDEC DO−41 OUTLINE SHALL APPLY
4. POLARITY DENOTED BY CATHODE BAND.
5. LEAD DIAMETER NOT CONTROLLED WITHIN F
DIMENSION.
AXIAL LEAD
CASE 59−10
ISSUE U
POLARITY INDICATOR
OPTIONAL AS NEEDED
(SEE STYLES)
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty , representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, af filiates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Japan: ON Semiconductor, Japan Customer Focus Center
2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051
Phone: 81−3−5773−3850
MUR210/D
SWITCHMODE is a trademark of Semiconductor Components Industries, LLC.
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 61312, Phoenix, Arizona 85082−1312 USA
Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada
Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: http://onsemi.com
Order Literature: http://www.onsemi.com/litorder
For additional information, please contact your
local Sales Representative.
