To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry. Notice 1. 2. 3. 4. 5. 6. 7. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas Electronics product depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as "Specific" or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is "Standard" unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. "Standard": 8. 9. 10. 11. 12. Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support. "Specific": Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries. (Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. HA17555 Series Precision Timer REJ03D0681-0100 (Previous: ADE-204-064) Rev.1.00 Jun 15, 2005 Description HA17555 Series are ICs designed for accurate time delays or oscillations. It provides both of trigger terminal and reset terminal in order to enable a wide scope of application including Mono Multi Vibrator and Astable Multi Vibrator, and the number of external components is fewer. Further, it's compatible with NE555 of singnetics. Features * * * * * * * * Mono multi vibrator can be constructed with one resistor and one capacitor. Astable multi vibrator can be constructed with two resistors and one capacitor. Delay time can be established widely from several seconds to several hours. Pulse Duty can be controlled. The maximum value of both sink current and source current is 200mA. Direct connection of output to TTL is possible. Temperature/delay time ratio is 50 ppm/C (typ). Output is normally in the on and off states. Ordering Information Application Type No. Package Code (Previous Code) Industrial use HA17555PS HA17555FP PRDP0008AF-A (DP-8B) PRSP0008DE-B (FP-8DGV) Commercial use HA17555 HA17555F PRDP0008AF-A (DP-8B) PRSP0008DE-B (FP-8DGV) Applications * * * * * Delay Time Generator (Mono Multi Vibrator) Pulse Generator (Astable Multi Vibrator) Pulse Width Modulator Pulse Location Modulator Miss Pulse Detector Pin Arrangement GND 1 8 VCC Trigger 2 7 Discharge Output 3 6 Threshold Reset 4 5 Control Voltage (Top View) Rev.1.00 Jun 15, 2005 page 1 of 7 HA17555 Series Pin Description Pin No. Function 1 2 Ground pin Trigger pin 3 4 Output pin Reset pin 5 6 Control voltage pin Threshold pin 7 8 Discharge pin VCC pin Circuit Schematic Control Voltage VCC R1 R2 R3 R4 R12 Q21 Q5 Q6 Q7 Q22 Q19 Q8 Q9 R13 R7 Q23 Threshold Q1 Q4 Q2 Q20 Q3 R14 Q18 R8 R11 R5 Q24 R16 Q11 Q12 Q10 Trigger Output Discharge R15 Q13 Q16 Q17 Q14 Q15 R6 R9 GND Reset Q25 Block Diagram VCC Threshold Control Trigger R Q S Output CLR Discharge Reset Rev.1.00 Jun 15, 2005 page 2 of 7 HA17555 Series Absolute Maximum Ratings (Ta = 25C) Item Supply voltage VCC Discharge current Output source current IT Isource Output sink current 1 Power dissipation* Operating temperature Storage temperature HA17555PS/FP 18 HA17555/F 18 Unit V 200 200 200 200 mA mA Isink PT 200 600/385 200 600/385 mA mW Topr Tstg -20 to +75 -55 to +125 -20 to +70 -55 to +125 C C 1. For the HA17555/PS, This value applies up to Ta = 50C; at temperatures above this, 8.3mW/C derating should be applied. For the HA17555F/FP, This value applies up to Ta = 25C; at temperatures above this, 3.85mW/C derating should be applied. See notes on SOP Package Usage in Reliability section. Maximum Power Dissipation PTmax (W) Note: Symbol a. HA17555PS b. HA17555FP 0.7 0.6 a. 0.6 W 8.3 mW/C 0.5 3.85 mW/C 0.4 b. 0.385 W 0.3 0.2 0.1 Maximum Power Dissipation PTmax (W) -40 -20 0 20 40 60 70 80 100 120 Ambient Temperature Ta (C) a. HA17555 b. HA17555F 0.7 0.6 a. 0.6 W 8.3 mW/C 0.5 3.85 mW/C 0.4 b. 0.385 W 0.3 0.2 0.1 -40 -20 0 20 40 60 70 80 100 120 Ambient Temperature Ta (C) Rev.1.00 Jun 15, 2005 page 3 of 7 HA17555 Series Electrical Characteristics (VCC = 5 to 15 V, Ta = 25C) Item 1 Supply voltage* Symbol VCC Supply current 2 Timing error* (Inherent error) 2 Timing error* (Ta dependency) 2 Timing error* (Voltage dependency) Threshold voltage Min 4.5 Typ -- Max 16.0 Unit V ICC ICC -- -- 3.0 10 6.0 15 mA mA Et -- 1.0 -- % Et -- 50 -- Et -- 0.01 -- %/V Test conditions VCC = 5 V, RL = VCC = 15 V, RL = ppm/C Ta = -20 to + 75C VCC = 5 to 15 V Vth -- 2/3 -- V x VCC Trigger voltage VT VT -- -- 5.0 1.67 -- -- V V Trigger current Reset voltage IT VR -- 0.2 0.5 0.5 -- 1.0 A V Reset current Threshold current IR 3 Ith* -- -- 0.1 0.1 -- 0.25 mA A Control voltage VCL VCL 9 2.6 10 3.33 11 4.0 V V VCC = 15 V VCC = 5 V Output voltage VOL -- -- 0.1 0.4 0.25 0.75 V V VCC = 15 V, Isink = 10 mA VCC = 15 V, Isink = 50 mA -- -- 2.0 2.5 2.5 -- V V VCC = 15 V, Isink = 100 mA VCC = 15 V, Isink = 200 mA -- -- 0.25 12.5 0.35 -- V V VCC = 5 V, Isink = 5 mA VCC = 15 V, Isource = 200 mA 12.75 2.75 13.3 3.3 -- -- V V VCC = 15 V, Isource = 100 mA VCC = 5 V, Isource = 100 mA -- -- 100 100 -- -- ns ns No loading No loading Output voltage VOH Output rise time Output fall time tr tf 4 VCC = 15 V VCC = 5 V Oscillation pulse width* tw 10.0 -- -- ns Notes: 1. When output is low (When it is high, ICC is lower by 1 mA typically.) 2. RA, RB = 1 k to 100 k, C = 0.1 F, VCC = 5 V or 15 V. 3. (RA + RB) at VCC = 15 V is determined by the value of Ith. It is 20 M Max. 4. Output pulse width at mono multi circuit. Output high level pulse width at astable circuit. Rev.1.00 Jun 15, 2005 page 4 of 7 HA17555 Series Characteristic Curves Quiescent Current vs. Supply Voltage Supply Voltage (VCC) Output Voltage (VOH) vs. Source Current 12.0 Supply Voltage VCC Output Voltage VOH (V) Vout : Low Level Quiescent Current ICC (mA) 10.0 Ta = -20C 8.0 25C 6.0 75C 4.0 2.0 0 5.0 10.0 Supply Voltage VCC (V) 15.0 2.0 Ta = -20C 1.6 25C 1.2 75C 0.8 5 V < VCC < 15 V 0.4 0 1 10 3 Output Voltage VOL (V) Output Voltage VOL (V) VCC = 10 V Ta = 75C 25C -20C 1.0 0.3 0.1 VCC = 5 V 0.03 100 Output Voltage (VOL) vs. Sink Current (2) Output Voltage (VOL) vs. Sink Current (1) 10 3 10 30 3 Source Current Isource (mA) 1.0 0.3 Ta = 75C -20C 0.1 25C 0.03 0.01 0.01 1 3 10 100 300 30 Sink Current Isink (mA) 1 1,000 3 10 30 100 300 Sink Current Isink (mA) 1,000 Relative Delay Time vs. Supply Voltage Output Voltage (VOL) vs. Sink Current (3) 1.015 10 1.010 Relative Delay Time Output Voltage VOL (V) VCC = 15 V 3 1.0 Ta = -75C 0.3 0.1 -20C 25C 1.005 1.000 0.995 0.990 0.03 0.01 0.985 1 3 10 30 100 300 Sink Current Isink (mA) Rev.1.00 Jun 15, 2005 page 5 of 7 1,000 3 5 10 15 Supply Voltage VCC (V) 18 HA17555 Series Relative Delay Time vs. Ambient Temperature Minimum Trigger Pulse Width vs. Low Level Trigger Voltage 1.015 Minimum Trigger Pulse Width (ns) 200 Relative Delay Time 1.010 1.005 1.000 0.995 0.990 150 100 Ta = -20C 50 0.985 -20 0 20 40 60 80 Ambient Temperature Ta (C) Propagation Delay Time (ns) 300 200 Ta = -20C 25C 100 0 75C 0.1 0.2 0.3 Low Level Trigger Voltage (xVCC) Rev.1.00 Jun 15, 2005 page 6 of 7 75C 0 Propagation Delay Time vs. Low Level Trigger Voltage 0.4 25C 0.1 0.2 0.3 0.4 Low Level Trigger Voltage (xVCC) HA17555 Series Package Dimensions JEITA Package Code P-DIP8-6.3x9.6-2.54 RENESAS Code PRDP0008AF-A Previous Code DP-8B MASS[Typ.] 0.51g D 5 E 8 1 4 b3 0.89 Z Reference Symbol Dimension in Millimeters Min Nom 7.62 D 9.6 E 6.3 Max A1 A e1 L A1 0.5 bp 0.38 c e1 0.48 c 0.20 0 e 2.29 0.25 0.35 2.54 2.79 15 1.27 Z 2.54 L JEITA Package Code P-SOP8-4.4x4.85-1.27 RENESAS Code PRSP0008DE-B *1 Previous Code FP-8DGV MASS[Typ.] 0.1g F D 8 0.58 1.3 b3 bp 7.4 5.06 A e 10.6 NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET. 5 c *2 E HE bp Reference Symbol Terminal cross section ( Ni/Pd/Au plating ) Z e Min Nom Max 4.85 5.25 E 4.4 A2 4 1 Dimension in Millimeters D Index mark *3 bp A1 x M 0.00 0.1 0.35 0.4 0.45 0.15 0.20 0.25 6.5 6.75 A 2.03 bp L1 0.20 b1 c A c1 A1 L y Detail F 0 HE 6.35 e 1.27 x 0.12 y 0.15 0.75 Z L L Rev.1.00 Jun 15, 2005 page 7 of 7 8 0.42 1 0.60 1.05 0.85 Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein. http://www.renesas.com RENESAS SALES OFFICES Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2730-6071 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology (Shanghai) Co., Ltd. Unit2607 Ruijing Building, No.205 Maoming Road (S), Shanghai 200020, China Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 (c) 2005. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon 2.0