1997 Nov 13 1
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Power Eurodin Printed Wiring PED-PW 050/052
FEATURES
•Polarized aluminium electrolytic
capacitors, non-solid
•Large types, cylindrical aluminium
case, insulated with a blue sleeve
•Provided with keyed polarity
•050 series also available in
solder-lug (SL) versions
•Pressure relief on the top of the
aluminium case
•Charge and discharge proof
•Very long useful life:
15000 hours at 85 °C
•Low ESR, high ripple current
capability
•High resistance to shock and
vibration.
APPLICATIONS
•Computer, telecommunication and
industrial systems
•Smoothing and filtering
•Standard and switched mode
power supplies
•Energy storage in pulse systems.
Fig.1 Component outlines.
handbook, 4 columns
PW PW SL
MBG936
handbook, 4 columns
MBG082
PED PW
050/052
higher
CV/volume
PEC PW
051/053 PLL PW
162/163
long life
105 oC
QUICK REFERENCE DATA
DESCRIPTION VALUE
050 052
Case size (∅Dnom ×Lnom in mm) 25 ×30 to 40 ×100
Rated capacitance range (E6 series), CR470 to 68000 µF 47 to 1000 µF
Tolerance on CR−10 to +30%
Rated voltage range, UR10 to 100 V 250 to 400 V
Category temperature range −40 to +85 °C
Endurance test at 85 °C 5000 hours
Useful life at 85 °C 15000 hours
Useful life at 40 °C and 1.4 ×IR applied 250000 hours
Shelf life at 0 V, 85 °C 500 hours
Based on sectional specification IEC 384-4/CECC 30300
Detail specification DIN 45910-T129 former DIN 41238
Climatic category IEC 68 40/085/56
1997 Nov 13 2
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Power Eurodin Printed Wiring PED-PW 050/052
Selection chart for CR, UR and relevant nominal case sizes (∅D×L in mm) for 050 series
Preferred types in bold.
Selection chart for CR, UR and relevant nominal case sizes (∅D×L in mm) for 052 series
Preferred types in bold.
CR
(µF) UR (V)
10 16 25 40 63 100
470 −−−−−25 ×30
680 −−−− 25 ×40
1000 −−−−25 ×30 30 ×40
1500 −−−25 ×30 25 ×40 35 ×40
2200 −−25 ×30 25 ×40 30 ×40 35 ×50
−−−−−40 ×40
3300 −25 ×30 25 ×40 30 ×40 35 ×40 40 ×50
4700 25 ×30 25 ×40 30 ×40 35 ×40 35 ×50 40 ×70
−−−−40 ×40 −
6800 25 ×40 30 ×40 35 ×40 35 ×50 40 ×50 40 ×100
−−−40 ×40 −−
10000 30 ×40 35 ×40 35 ×50 40 ×50 40 ×70 −
−−40 ×40 −−−
15000 35 ×40 35 ×50 40 ×50 40 ×70 40 ×100 −
−40 ×40 −−−−
22000 35 ×50 40 ×50 40 ×70 40 ×100 −−
40 ×40 −−−−−
33000 40 ×50 40 ×70 40 ×100 −−−
47000 40 ×70 40 ×100 −−−−
68000 40 ×100 −−−−−
C
R
(µF) UR (V)
250 385 400
47 −25 ×30 25 ×30
68 −25 ×40 25 ×40
100 25 ×30 30 ×40 30 ×40
150 25 ×40 35 ×40 35 ×40
220 30 ×40 35 ×50 35 ×50
−40 ×40 40 ×40
330 35 ×40 40 ×50 40 ×50
470 35 ×50 40 ×70 40 ×70
40 ×40 −−
680 40 ×50 −40 ×100
1000 40 ×70 −−
1997 Nov 13 3
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Power Eurodin Printed Wiring PED-PW 050/052
MECHANICAL DATA AND PACKAGING QUANTITIES
Fig.2 Printed wiring pin version.
Dimensions in mm; for L see Table 1.
1 = positive terminal; 5 = negative terminal.
Case ∅D = 25 mm.
∅D + 1 max.
handbook, halfpage
CCA975
LL + 5 max.
5.1
±0.1
2
15
handbook, halfpage
MGB266
10 0.1
1.3
(3x)
12.5
0.1
2.5
1
2
5
Fig.3 Mounting hole diagram viewed
from component side.
Dimensions in mm.
Case ∅D=25mm.
∅D + 1 max.
handbook, halfpage
CCA976
L
1 2
3
5
L + 5 max.
5.1
±0.1
Fig.4 Printed wiring pin version.
Dimensions in mm; for L see Table 1.
1 = positive terminal; 5 = negative terminal.
Case ∅D = 30 mm.Fig.5 Mounting hole diagram viewed
from component side.
handbook, halfpage
MGB267
15 0.1
1.3
(4x)
7.5 0.1 17.5 0.1
2.5
1
2
3
5
Dimensions in mm.
Case ∅D=30mm.
1997 Nov 13 4
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Power Eurodin Printed Wiring PED-PW 050/052
Fig.6 Printed wiring pin version.
Dimensions in mm; for L see Table 1.
1 = positive terminal; 5 = negative terminal.
Case ∅D = 35 mm.
∅D + 1 max.
handbook, halfpage
CCA977
L
1 2
3
5
L + 5 max.
5.1
±0.1
Fig.7 Mounting hole diagram viewed
from component side.
handbook, halfpage
MGB268
15 0.1
1.3
(4x)
7.5 0.1 17.5 0.1
2.5
1
2
3
5
Dimensions in mm.
Case ∅D=35mm.
Table 1 PW versions; physical dimensions, mass and packaging information; see Figs 2, 4, 6 and 8
NOMINAL
CASE SIZE
∅D×L
(mm)
∅Dmax
(mm) Lmax
(mm) MASS
(g) PACKAGING QUANTITIES
(units per box)
CARDBOARD
BOX DIMENSIONS
l×w×h
(mm)
25 ×30 26 35 ≈24 100 290 ×280 ×45
25 ×40 26 45 ≈28 100 290 ×280 ×55
30 ×40 31 45 ≈38 100 340 ×330 ×55
35 ×40 36 45 ≈51 50 390 ×198 ×55
35 ×50 36 45 ≈66 50 390 ×198 ×65
40 ×40 41 45 ≈78 50 440 ×223 ×55
40 ×50 41 55 ≈82 50 440 ×223 ×65
40 ×70 41 75 ≈110 50 440 ×223 ×85
40 ×100 41 105 ≈176 50 440 ×223 ×115
1997 Nov 13 5
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Power Eurodin Printed Wiring PED-PW 050/052
Dimensions in mm; for L see Table 1.
1 = positive terminal; 5 = negative terminal.
Case ∅D = 40 mm.
Fig.8 Printed wiring pin version.
handbook, halfpage
CCA978
L
145
3
2
∅D + 1 max.
L + 5 max.
5.1
±0.1
Dimensions in mm.
Case ∅D=40mm.
Fig.9 Mounting hole diagram viewed from
component side.
handbook, halfpage
MGB269
20 0.1
1.3
(5x)
10 0.1 17.5 0.1
2.5
20 0.1
1
2
3
4
5
Mounting
When a number of capacitors are connected in a bank, they must not be closer together than 15 mm, when no derating
of ripple current and/or temperature is applied.
Pin numbers 2, 3 and 4 (if present) must be free from the electrical circuit.
1997 Nov 13 6
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Power Eurodin Printed Wiring PED-PW 050/052
Table 2 SL versions (050 series only); physical dimensions, mass and packaging information; see Fig.10
NOMINAL
CASE SIZE
∅D×L
(mm)
∅Dmax
(mm) Lmax
(mm) MASS
(g) PACKAGING QUANTITIES
(units per box)
CARDBOARD
BOX DIMENSIONS
l×w×h
(mm)
25 ×30 26 32 ≈24 100 290 ×280 ×65
25 ×40 26 42 ≈28 100 290 ×280 ×75
30 ×40 31 42 ≈38 100 340 ×330 ×75
35 ×40 36 42 ≈51 50 390 ×198 ×75
35 ×50 36 52 ≈66 50 390 ×198 ×85
40 ×50 41 52 ≈82 50 440 ×223 ×85
40 ×70 41 72 ≈110 50 440 ×223 ×105
40 ×100 41 102 ≈176 50 440 ×223 ×135
Dimensions in mm; for L see Table 2.
1 = positive terminal; 5 = negative terminal.
See this handbook, section
“Mounting Accessories”
.
Fig.10 Solder-lug version (SL); only available in 050 series.
handbook, halfpage
CCA982
∅D + 1 max.
L L + 2 max.
10 ±1
10
±0.5
T4 DIN 41497
51
0.8
1997 Nov 13 7
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Power Eurodin Printed Wiring PED-PW 050/052
ELECTRICAL DATA AND ORDERING INFORMATION
Unless otherwise specified, all electrical values in Tables 3 and 4 apply at
Tamb =20°C, P = 86 to 106 kPa, RH = 45 to 75%.
SYMBOL DESCRIPTION
CRrated capacitance at 100 Hz
IRrated RMS ripple current at 100 Hz, 85 °C or at 20 kHz, 70 °C
IL1 max. leakage current after 1 minute at UR
IL5 max. leakage current after 5 minutes at UR
ESR max. equivalent series resistance at 100 Hz
Z max. impedance at 10 kHz
Ordering example
Electrolytic capacitor
050 series
10000 µF/25 V; −10/+30%
Nominal case size: ∅35 ×50 mm;
PW version
Catalogue number: 2222 050 56103.
Table 3 Electrical data and ordering information for 050 series; preferred types in bold
UR
(V)
CR
100 Hz
(µF)
NOMINAL
CASE SIZE
∅D×L
(mm)
IR
100 Hz
85 °C
(A)
IR
20 kHz
70 °C
(A)
IL1
1 min
(mA)
IL5
5 min
(mA)
ESR
100 Hz
(mΩ)
Z
10 kHz
(mΩ)
CATALOGUE
NUMBER
(note 1)
2222 ... .....
10 4700 25 ×30 2.4 4.6 0.28 0.10 74 50 050 54472
6800 25 ×40 3.2 6.1 0.41 0.14 51 37 050 54682
10000 30 ×40 3.8 7.2 0.60 0.20 39 29 050 54103
15000 35 ×40 4.1 7.8 0.90 0.30 35 26 050 54153
22000 35 ×50 5.0 9.5 1.32 0.44 27 21 050 54223
22000 40 ×40 4.2 8.0 1.32 0.44 36 27 050 44223
33000 40 ×50 5.0 9.5 1.98 0.66 29 22 050 54333
47000 40 ×70 6.8 12.9 2.82 0.94 20 17 050 54473
68000 40 ×100 9.2 17.5 4.08 1.36 15 14 050 54683
16 3300 25 ×30 2.4 4.6 0.32 0.11 75 50 050 55332
4700 25 ×40 3.1 5.9 0.45 0.15 52 37 050 55472
6800 30 ×40 3.7 7.0 0.65 0.22 40 30 050 55682
10000 35 ×40 4.1 7.8 0.96 0.32 36 27 050 55103
15000 35 ×50 5.0 9.5 1.44 0.48 28 21 050 55153
15000 40 ×40 4.2 8.0 1.44 0.48 36 27 050 45153
22000 40 ×50 5.0 9.5 2.12 0.71 29 22 050 55223
33000 40 ×70 6.7 12.7 3.17 1.06 20 17 050 55333
47000 40 ×100 9.1 17.3 4.51 1.51 15 14 050 55473
25 2200 25 ×30 2.3 4.4 0.33 0.11 78 52 050 56222
3300 25 ×40 3.1 5.9 0.49 0.17 53 38 050 56332
4700 30 ×40 3.7 7.0 0.70 0.24 42 31 050 56472
6800 35 ×40 4.1 7.8 1.02 0.34 37 28 050 56682
10000 35 ×50 5.0 9.5 1.50 0.50 28 21 050 56103
10000 40 ×40 4.2 8.0 1.50 0.50 36 27 050 46103
15000 40 ×50 5.0 9.5 2.25 0.75 29 22 050 56153
22000 40 ×70 6.8 12.9 3.30 1.10 20 17 050 56223
33000 40 ×100 9.2 17.5 4.95 1.65 15 14 050 56333
1997 Nov 13 8
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Power Eurodin Printed Wiring PED-PW 050/052
Note
1. Catalogue number applies to the PW versions; for SL versions (not preferred) available in 050 series only (case size
∅40 ×40 mm not available) replace the 8th digit by ‘1’: SL versions: 2222 050 1....
40 1500 25 ×30 2.0 3.8 0.36 0.12 112 68 050 57152
2200 25 ×40 2.7 5.1 0.53 0.18 76 51 050 57222
3300 30 ×40 3.3 6.3 0.79 0.27 57 41 050 57332
4700 35 ×40 3.8 7.2 1.13 0.38 48 35 050 57472
6800 35 ×50 4.7 8.9 1.64 0.55 36 27 050 57682
6800 40 ×40 4.1 7.8 1.64 0.55 45 33 050 47682
10000 40 ×50 4.9 9.3 2.40 0.80 35 27 050 57103
15000 40 ×70 6.6 12.5 3.60 1.20 25 20 050 57153
22000 40 ×100 9.0 17.1 5.28 1.76 18 16 050 57223
63 1000 25 ×30 1.8 3.4 0.38 0.13 122 74 050 58102
1500 25 ×40 2.5 4.7 0.57 0.19 83 54 050 58152
2200 30 ×40 3.1 5.9 0.83 0.28 57 41 050 58222
3300 35 ×40 3.6 6.8 1.25 0.42 48 35 050 58332
4700 35 ×50 4.4 8.3 1.78 0.60 36 27 050 58472
4700 40 ×40 3.8 7.2 1.78 0.60 45 33 050 48472
6800 40 ×50 4.7 8.9 2.57 0.86 35 27 050 58682
10000 40 ×70 6.2 11.8 3.78 1.26 25 20 050 58103
15000 40 ×100 8.5 16.1 5.67 1.89 18 16 050 58153
100 470 25 ×30 1.4 2.7 0.28 0.10 247 172 050 59471
680 25 ×40 1.9 3.6 0.41 0.14 170 116 050 59681
1000 30 ×40 2.5 4.7 0.60 0.20 123 88 050 59102
1500 35 ×40 3.1 5.8 0.90 0.30 94 71 050 59152
2200 35 ×50 3.9 7.4 1.32 0.44 69 55 050 59222
2200 40 ×40 3.6 6.8 1.32 0.44 81 65 050 49222
3300 40 ×50 4.6 8.7 1.98 0.66 59 48 050 59332
4700 40 ×70 6.2 11.7 2.82 0.94 42 36 050 59472
6800 40 ×100 8.2 15.5 4.08 1.36 32 28 050 59682
UR
(V)
CR
100 Hz
(µF)
NOMINAL
CASE SIZE
∅D×L
(mm)
IR
100 Hz
85 °C
(A)
IR
20 kHz
70 °C
(A)
IL1
1 min
(mA)
IL5
5 min
(mA)
ESR
100 Hz
(mΩ)
Z
10 kHz
(mΩ)
CATALOGUE
NUMBER
(note 1)
2222 ... .....
1997 Nov 13 9
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Power Eurodin Printed Wiring PED-PW 050/052
Table 4 Electrical data and ordering information for 052 series; preferred types in bold
UR
(V)
CR
100 Hz
(µF)
NOMINAL
CASE SIZE
∅D×L
(mm)
IR
100 Hz
85 °C
(A)
IR
20 kHz
70 °C
(A)
IL1
1 min
(mA)
IL5
5 min
(mA)
ESR
100 Hz
(mΩ)
Z
10 kHz
(mΩ)
CATALOGUE
NUMBER
2222 ... .....
250 100 25 ×30 0.6 1.15 0.15 0.05 1800 1300 052 53101
150 25 ×40 0.8 1.5 0.23 0.08 1100 850 052 53151
220 30 ×40 1.0 1.9 0.33 0.11 750 550 052 53221
330 35 ×40 1.4 2.65 0.49 0.17 500 400 052 53331
470 35 ×50 1.8 3.4 0.70 0.24 360 290 052 53471
470 40 ×40 1.8 3.4 0.70 0.24 420 350 052 43471
680 40 ×50 2.3 4.4 1.02 0.34 250 190 052 53681
1000 40 ×70 3.0 5.7 1.50 0.50 170 140 052 53102
385 47 25 ×30 0.5 0.94 0.11 0.04 2370 1550 052 58479
68 25 ×40 0.67 1.27 0.16 0.06 1640 1100 052 58689
100 30 ×40 0.84 1.59 0.23 0.08 1275 950 052 58101
150 35 ×40 1.13 2.14 0.34 0.11 850 635 052 58151
220 35 ×50 1.48 2.8 0.50 0.17 580 430 052 58221
220 40 ×40 1.48 2.8 0.50 0.17 580 430 052 48221
330 40 ×50 1.97 3.73 0.75 0.25 385 300 052 58331
470 40 ×70 2.7 5.11 1.06 0.36 270 215 052 58471
400 47 25 ×30 0.47 0.89 0.11 0.04 2700 2125 052 56479
68 25 ×40 0.63 1.29 0.16 0.06 1875 1470 052 56689
100 30 ×40 0.84 1.59 0.24 0.08 1275 1000 052 56101
150 35 ×40 1.13 2.14 0.36 0.12 850 665 052 56151
220 35 ×50 1.41 2.67 0.52 0.17 650 450 052 56221
220 40 ×40 1.41 2.67 0.52 0.17 650 450 052 46221
330 40 ×50 1.86 3.52 0.79 0.26 435 315 052 56331
470 40 ×70 2.54 4.81 1.12 0.37 305 225 052 56471
680 40 ×100 3.56 6.75 1.63 0.54 210 155 052 56681
1997 Nov 13 10
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Power Eurodin Printed Wiring PED-PW 050/052
Additional electrical data
Capacitance (C)
PARAMETER CONDITIONS VALUE
Voltage
Surge voltage for short periods ≤250 V versions Us= 1.15 ×UR
≥385 V versions Us= 1.1 ×UR
Reverse voltage Urev ≤1V
Current
Leakage current after 1 minute at URIL1 ≤0.006CR×UR+4µA
after 5 minutes at URIL5 ≤0.002CR×UR+4µA
Inductance
Equivalent series inductance (ESL) case ∅D = 25 mm max. 25 nH
case ∅D = 30 and 35 mm max. 30 nH
case ∅D = 40 mm max. 35 nH
handbook, 4 columns
60 0 20
MGB285
40 40 60 80
Tamb ( C)
o
0.6
0.7
0.8
0.9
1.0
1.1
1.2
20
2
2
1
1
3
3
C
0
C
4
4
Fig.11 Typical multiplier of capacitance as a function of ambient temperature.
Curve 1: UR=10V.
Curve 2: UR=25V.
Curve 3: UR=63V.
Curve 4: UR= 100 V, 250 V and 385 V.
C0= capacitance at 20 °C, 100 Hz.
1997 Nov 13 11
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Power Eurodin Printed Wiring PED-PW 050/052
Equivalent series resistance (ESR)
handbook, 4 columns
MGB286
0 50 10050 Tamb ( C)
o
ESR
(m )Ω
10
1
104
103
102
1
2
3
4
5
7
8
9
6
Fig.12 Typical ESR as a function of temperature.
Curve 1: case ∅D×L=25×30 mm.
Curve 2: case ∅D×L=25×40 mm.
Curve 3: case ∅D×L=30×40 mm.
Curve 4: case ∅D×L=35×40 mm.
Curve 5: case ∅D×L=40×40 mm.
Curve 6: case ∅D×L=35×50 mm.
Curve 7: case ∅D×L=40×50 mm.
Curve 8: case ∅D×L=40×70 mm.
Curve 9: case ∅D×L=40×100 mm.
ESR at 100 Hz and UR=10V.
handbook, 4 columns
MGB287
0 50 10050 Tamb ( C)
o
10
1
104
103
1027
ESR
(m )Ω
1
2
3
4
6
5
8
9
Fig.13 Typical ESR as a function of temperature.
Curve 1: case ∅D×L=25×30 mm.
Curve 2: case ∅D×L=25×40 mm.
Curve 3: case ∅D×L=30×40 mm.
Curve 4: case ∅D×L=35×40 mm.
Curve 5: case ∅D×L=40×40 mm.
Curve 6: case ∅D×L=35×50 mm.
Curve 7: case ∅D×L=40×50 mm.
Curve 8: case ∅D×L=40×70 mm.
Curve 9: case ∅D×L=40×100 mm.
ESR at 100 Hz and UR=63V.
1997 Nov 13 12
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Power Eurodin Printed Wiring PED-PW 050/052
handbook, 4 columns
MGB288
0 50 10050 Tamb ( C)
o
ESR
(m )Ω
10
1
104
103
1022
1
3
4
6
5
7
8
9
Fig.14 Typical ESR as a function of temperature.
Curve 1: case ∅D×L=25×30 mm.
Curve 2: case ∅D×L=25×40 mm.
Curve 3: case ∅D×L=30×40 mm.
Curve 4: case ∅D×L=35×40 mm.
Curve 5: case ∅D×L=40×40 mm.
Curve 6: case ∅D×L=35×50 mm.
Curve 7: case ∅D×L=40×50 mm.
Curve 8: case ∅D×L=40×70 mm.
Curve 9: case ∅D×L=40×100 mm.
ESR at 100 Hz and UR= 100 V.
handbook, 4 columns
MGB289
0 50 10050 Tamb ( C)
o
10
104
103
1027
105
ESR
(m )Ω
1
2
3
4
6
5
8
Fig.15 Typical ESR as a function of temperature.
Curve 1: case ∅D×L=25×30 mm.
Curve 2: case ∅D×L=25×40 mm.
Curve 3: case ∅D×L=30×40 mm.
Curve 4: case ∅D×L=35×40 mm.
Curve 5: case ∅D×L=40×40 mm.
Curve 6: case ∅D×L=35×50 mm.
Curve 7: case ∅D×L=40×50 mm.
Curve 8: case ∅D×L=40×70 mm.
ESR at 100 Hz and UR= 385 V.
1997 Nov 13 13
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Power Eurodin Printed Wiring PED-PW 050/052
Impedance (Z)
handbook, 4 columns
MGB290
0 50 100
1
10
50 Tamb ( C)
o
Z
(m )Ω
103
102
1
2
3
4
5
6
7
8
Fig.16 Typical impedance as a function of temperature.
Curve 1: case ∅D×L=25×30 mm.
Curve 2: case ∅D×L=25×40 mm.
Curve 3: case ∅D×L=30×40 mm.
Curve 4: case ∅D×L=35×40 mm.
Curve 5: case ∅D×L=35×50 and 40 ×40 mm.
Curve 6: case ∅D×L=40×50 mm.
Curve 7: case ∅D×L=40×70 mm.
Curve 8: case ∅D×L=40×100 mm.
Z at 10 kHz and UR=10V.
handbook, 4 columns
MGB291
0 50 100
1
10
50 Tamb ( C)
o
103
102
4
5
Z
(m )Ω1
2
3
6
7
8
Fig.17 Typical impedance as a function of temperature.
Curve 1: case ∅D×L=25×30 mm.
Curve 2: case ∅D×L=25×40 mm.
Curve 3: case ∅D×L=30×40 mm.
Curve 4: case ∅D×L=35×40 mm.
Curve 5: case ∅D×L=35×50 and 40 ×40 mm.
Curve 6: case ∅D×L=40×50 mm.
Curve 7: case ∅D×L=40×70 mm.
Curve 8: case ∅D×L=40×100 mm.
Z at 10 kHz and UR=63V.
1997 Nov 13 14
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Power Eurodin Printed Wiring PED-PW 050/052
handbook, 4 columns
MGB292
0 50 10050 Tamb ( C)
o
10
1
104
103
102
2
3
Z
(m )Ω1
4
6
5
8
7
Fig.18 Typical impedance as a function of temperature.
Curve 1: case ∅D×L=25×30 mm.
Curve 2: case ∅D×L=25×40 mm.
Curve 3: case ∅D×L=30×40 mm.
Curve 4: case ∅D×L=35×40 mm.
Curve 5: case ∅D×L=35×50 and 40 ×40mm.
Curve 6: case ∅D×L=40×50 mm.
Curve 7: case ∅D×L=40×70 mm.
Curve 8: case ∅D×L=40×100 mm.
Z at 10 kHz and UR= 100 V.
handbook, 4 columns
MGB293
0 50 10050 Tamb ( C)
o
10
104
103
102
105
Z
(m )Ω
1
2
3
4
6
5
8
7
Fig.19 Typical impedance as a function of temperature.
Curve 1: case ∅D×L=25×30 mm.
Curve 2: case ∅D×L=25×40 mm.
Curve 3: case ∅D×L=30×40 mm.
Curve 4: case ∅D×L=35×40 mm.
Curve 5: case ∅D×L=40×40 mm.
Curve 6: case ∅D×L=35×50 mm.
Curve 7: case ∅D×L=40×50 mm.
Curve 8: case ∅D×L=40×70 mm.
Z at 10 kHz and UR= 385 V.
1997 Nov 13 15
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Power Eurodin Printed Wiring PED-PW 050/052
handbook, 4 columns
106
MGB294
105
104
103
102
10 107
f (Hz)
102
10 2
10
1
10 1
Z
( )Ω
1
2
3
4
5
Fig.20 Typical impedance as a function of frequency.
Curve 1: 47 µF, 385 V.
Curve 2: 100 µF, 250 V.
Curve 3: 470 µF, 100 V.
Curve 4: 1000 µF, 63 V.
Curve 5: 4700 µF, 10 V.
Case ∅D×L=25×30 mm.
Tamb =20°C.
handbook, 4 columns
106
MGB295
105
104
103
102
10 107
f (Hz)
102
10 2
10
1
Z
( )Ω
10 1
10
1
2
3
4
5
Fig.21 Typical impedance as a function of frequency.
Curve 1: 68 µF, 385 V.
Curve 2: 150 µF, 250 V.
Curve 3: 680 µF, 100 V.
Curve 4: 1500 µF, 63 V.
Curve 5: 6800 µF, 10 V.
Case ∅D×L=25×40 mm.
Tamb =20°C.
1997 Nov 13 16
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Power Eurodin Printed Wiring PED-PW 050/052
Fig.22 Typical impedance as a function of frequency.
handbook, 4 columns
106
MGB296
105
104
103
102
10 107
f (Hz)
102
10 2
10
1
Z
( )Ω
10 1
10
1
2
3
4
5
Curve 1: 100 µF, 385 V.
Curve 2: 220 µF, 250 V.
Curve 3: 1000 µF, 100 V.
Curve 4: 2200 µF, 63 V.
Curve 5: 10000 µF, 10 V.
Case ∅D×L=30×40 mm.
Tamb =20°C.
handbook, 4 columns
106
MGB297
105
104
103
102
10 107
f (Hz)
102
10 2
10
1
Z
( )Ω
10 1
10
1
2
3
4
5
Fig.23 Typical impedance as a function of frequency.
Curve 1: 150 µF, 385 V.
Curve 2: 330 µF, 250 V.
Curve 3: 1500 µF, 100 V.
Curve 4: 3300 µF, 63 V.
Curve 5: 15000 µF, 10 V.
Case ∅D×L=35×40 mm.
Tamb =20°C.
1997 Nov 13 17
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Power Eurodin Printed Wiring PED-PW 050/052
handbook, 4 columns
106
MGB298
105
104
103
102
10 107
f (Hz)
102
10 2
10
1
Z
( )Ω
10 1
10
1
2
3
4
5
Fig.24 Typical impedance as a function of frequency.
Curve 1: 220 µF, 385 V.
Curve 2: 470 µF, 250 V.
Curve 3: 2200 µF, 100 V.
Curve 4: 4700 µF, 63 V.
Curve 5: 22000 µF, 10 V.
Case ∅D×L=35×50 mm.
Tamb =20°C.
handbook, 4 columns
106
MGB299
105
104
103
102
10 107
f (Hz)
102
10 2
10
1
Z
( )Ω
10 1
10
1
2
3
4
5
Fig.25 Typical impedance as a function of frequency.
Curve 1: 220 µF, 385 V.
Curve 2: 470 µF, 250 V.
Curve 3: 2200 µF, 100 V.
Curve 4: 4700 µF, 63 V.
Curve 5: 22000 µF, 10 V.
Case ∅D×L=40×40 mm.
Tamb =20°C.
1997 Nov 13 18
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Power Eurodin Printed Wiring PED-PW 050/052
handbook, 4 columns
106
MGB300
105
104
103
102
10 107
f (Hz)
102
10 2
10
1
Z
( )Ω
10 1
10
1
2
3
4
5
Fig.26 Typical impedance as a function of frequency.
Curve 1: 330 µF, 385 V.
Curve 2: 680 µF, 250 V.
Curve 3: 3300 µF, 100 V.
Curve 4: 6800 µF, 63 V.
Curve 5: 33000 µF, 10 V.
Case ∅D×L=40×50 mm.
Tamb =20°C.
handbook, 4 columns
106
MGB301
105
104
103
102
10 107
f (Hz)
102
10 2
10
1
Z
( )Ω
10 1
10
1
2
3
4
5
Fig.27 Typical impedance as a function of frequency.
Curve 1: 470 µF, 385 V.
Curve 2: 1000 µF, 250 V.
Curve 3: 4700 µF, 100 V.
Curve 4: 10000 µF, 63 V.
Curve 5: 47000 µF, 10 V.
Case ∅D×L=40×70 mm.
Tamb =20°C.
1997 Nov 13 19
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Power Eurodin Printed Wiring PED-PW 050/052
handbook, 4 columns
106
MGB302
105
104
103
102
10 107
f (Hz)
10 2
10
1
10 3
Z
( )Ω
10 1
10
10
1
2
3
Fig.28 Typical impedance as a function of frequency.
Curve 1: 6800 µF, 100 V.
Curve 2: 15000 µF, 63 V.
Curve 3: 68000 µF, 10 V.
Case ∅D×L=40×100 mm.
Tamb =20°C.
MARKING
The capacitors are marked (where possible) with the following information:
•Rated capacitance (in µF)
•Tolerance on rated capacitance (Q for −10/+30%)
•Rated voltage (in V)
•Climatic category in accordance with
“IEC 68”
•Date code (year and week) in accordance with
“IEC 62”
•Code for factory of origin
•Name of manufacturer
•Polarity of the terminals and ‘−’ sign to indicate the negative terminal, visible from the top and/or side of the capacitor
•Code number
•Code for basic specification in accordance with
“IEC 384-4-1”
and
“CECC 30301”
.
1997 Nov 13 20
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Power Eurodin Printed Wiring PED-PW 050/052
RIPPLE CURRENT AND USEFUL LIFE
Table 5 Multiplier of ripple current (IR) as a function of frequency
FREQUENCY (Hz) IR MULTIPLIER
50 0.83
100 1.00
200 1.10
400 1.15
1000 1.19
≥2000 1.20
Fig.29 Multiplier of useful life as a function of ambient temperature and ripple current load.
IA= actual ripple current at 100 Hz and 85 °C.
IR= rated ripple current at 100 Hz and 85 °C.
(1) Useful life at 85 °C and IR applied: 15000 hours.
handbook, full pagewidth
1.3
1.2
1.1
1.0
0.8
0.5
0.040 50 60 70 80 90
Tamb (C)
o
I
A
R
I
MGA453
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
2.4
life multiplier
(1)
80
60
30
20
10
8
5
4
3
2
2.5
1.5
1
1.2
15
1997 Nov 13 21
Philips Components Product specification
Non-solid Al - electrolytic capacitors
Power Eurodin Printed Wiring PED-PW 050/052
SPECIFIC TESTS AND REQUIREMENTS
General tests and requirements are specified in data handbook PA01, section
“Tests and Requirements”
.
Table 6 Test procedures and requirements
TEST PROCEDURE
(quick reference) REQUIREMENTS
NAME OF TEST REFERENCE
Endurance IEC 384-4/
CECC 30300
subclause 4.13
Tamb =85°C; UR applied;
5000 hours UR≤100 V; ∆C/C: ±15%
UR>100 V; ∆C/C: ±10%
Z≤2×spec. limit
IL5 ≤spec. limit
Useful life CECC 30301
subclause 1.8.1 Tamb =85°C; UR and IR applied;
15000 hours UR≤100 V; ∆C/C: ±45%
UR> 100 V; ∆C/C: ±30%
Z≤3×spec. limit
IL5 ≤spec. limit
no short or open circuit, no
visible damage
total failure percentage:
UR≤100 V: ≤1%;
UR>100 V: ≤3%
Shelf life
(storage at
high temperature)
IEC 384-4/
CECC 30300
subclause 4.17
Tamb =85°C; no voltage applied;
500 hours;
after test: UR to be applied for 30 minutes,
24 to 48 hours before measurement
∆C/C: ±10%
IL5 ≤2×spec. limit
