74HC4051D,653 - NEXPERIA - Datasheet.Directory

74HC4051; 74HCT4051

8-channel analog multiplexer/demultiplexer

Rev. 9 — 26 September 2017 Product data sheet

1 General description

The 74HC4051; 74HCT4051 is a single-pole octal-throw analog switch (SP8T) suitable

for use in analog or digital 8:1 multiplexer/demultiplexer applications. The switch features

three digital select inputs (S0, S1 and S2), eight independent inputs/outputs (Yn), a

common input/output (Z) and a digital enable input (E). When E is HIGH, the switches

are turned off. Inputs include clamp diodes. This enables the use of current limiting

resistors to interface inputs to voltages in excess of VCC.

2 Features and benefits

•Wide analog input voltage range from -5 V to +5 V

•Complies with JEDEC standard no. 7A

•Low ON resistance:

–80 Ω (typical) at VCC - VEE = 4.5 V

–70 Ω (typical) at VCC - VEE = 6.0 V

–60 Ω (typical) at VCC - VEE = 9.0 V

•Logic level translation: to enable 5 V logic to communicate with ±5 V analog signals

•Typical ‘break before make’ built-in

•ESD protection:

–HBM JESD22-A114F exceeds 2000 V

–MM JESD22-A115-A exceeds 200 V

–CDM JESD22-C101E exceeds 1000 V

•Multiple package options

•Specified from -40 °C to +85 °C and -40 °C to +125 °C

3 Applications

•Analog multiplexing and demultiplexing

•Digital multiplexing and demultiplexing

•Signal gating

Nexperia 74HC4051; 74HCT4051

8-channel analog multiplexer/demultiplexer

Product data sheet Rev. 9 — 26 September 2017

2 / 32

4 Ordering information

Table 1. Ordering information

PackageType number

Temperature range Name Description Version

74HC4051D

74HCT4051D

-40 °C to +125 °C SO16 plastic small outline package; 16 leads;

body width 3.9 mm

SOT109-1

74HC4051DB

74HCT4051DB

-40 °C to +125 °C SSOP16 plastic shrink small outline package; 16 leads;

body width 5.3 mm

SOT338-1

74HC4051PW

74HCT4051PW

-40 °C to +125 °C TSSOP16 plastic thin shrink small outline package; 16 leads;

body width 4.4 mm

SOT403-1

74HC4051BQ

74HCT4051BQ

-40 °C to +125 °C DHVQFN16 plastic dual in-line compatible thermal enhanced

very thin quad flat package; no leads; 16 terminals;

body 2.5 x 3.5 x 0.85 mm

SOT763-1

5 Functional diagram

001aad543

LOGIC

LEVEL

CONVERSION

VCC

13 Y0

1-OF-8

DECODER

14 Y1

15 Y2

12 Y3

1 Y4

5 Y5

2 Y6

4 Y7

3 Z

10S1

9S2

8 7

GND VEE

Figure 1. Functional diagram

Nexperia 74HC4051; 74HCT4051

8-channel analog multiplexer/demultiplexer

Product data sheet Rev. 9 — 26 September 2017

3 / 32

001aad541

13 Y0

1411 Y1S0

15 Y2

12 Y3

1Y4

5Y5

2Y6

4Y7

Figure 2. Logic symbol

MUX/DMUX 13

001aad542

8 X 0

Figure 3. IEC logic symbol

001aad544

from

logic

VCC

VEE

VCC

VEE

VCC

Figure 4. Schematic diagram (one switch)

Nexperia 74HC4051; 74HCT4051

8-channel analog multiplexer/demultiplexer

Product data sheet Rev. 9 — 26 September 2017

4 / 32

6 Pinning information

6.1 Pinning

Y4 VCC

Y6 Y2

Z Y1

Y7 Y0

Y5 Y3

E S0

VEE S1

GND S2

001aad539

74HC4051

74HCT4051

Figure 5. Pin configuration SO16, and (T)SSOP16

001aad540

VEE S1

E S0

Y5 Y3

Y7 Y0

Z Y1

Y6 Y2

GND

Transparent top view

7 10

6 11

5 12

4 13

3 14

2 15

terminal 1

index area

VCC(1)

74HC4051

74HCT4051

(1) This is not a supply pin. The substrate is attached

to this pad using conductive die attach material. There

is no electrical or mechanical requirement to solder this

pad.However, if it is soldered, the solder land should remain

floating or be connected to VCC.

Figure 6. Pin configuration DHVQFN16

6.2 Pin description

Table 2. Pin description

Symbol Pin Description

E 6 enable input (active LOW)

VEE 7 supply voltage

GND 8 ground supply voltage

S0, S1, S2 11, 10, 9 select input

Y0, Y1, Y2, Y3, Y4, Y5, Y6, Y7 13, 14, 15, 12, 1, 5, 2, 4 independent input or output

Z 3 common output or input

VCC 16 supply voltage

Nexperia 74HC4051; 74HCT4051

8-channel analog multiplexer/demultiplexer

Product data sheet Rev. 9 — 26 September 2017

5 / 32

7 Function description

Table 3. Function table [1]

Input

E S2 S1 S0

Channel ON

L L L L Y0 to Z

L L L H Y1 to Z

L L H L Y2 to Z

L L H H Y3 to Z

L H L L Y4 to Z

L H L H Y5 to Z

L H H L Y6 to Z

L H H H Y7 to Z

H X X X switches off

[1] H = HIGH voltage level; L = LOW voltage level; X = don’t care.

8 Limiting values

Table 4. Limiting values

In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to VSS = 0 V (ground).

Symbol Parameter Conditions Min Max Unit

VCC supply voltage [1] -0.5 +11.0 V

IIK input clamping current VI < -0.5 V or VI > VCC + 0.5 V - ±20 mA

ISK switch clamping current VSW < -0.5 V or VSW > VCC + 0.5 V - ±20 mA

ISW switch current -0.5 V < VSW < VCC + 0.5 V - ±25 mA

IEE supply current - ±20 mA

ICC supply current - 50 mA

IGND ground current - -50 mA

Tstg storage temperature -65 +150 °C

Ptot total power dissipation SO16, (T)SSOP16, and

DHVQFN16 package

[2] - 500 mW

P power dissipation per switch - 100 mW

[1] To avoid drawing VCC current out of terminal Z, when switch current flows into terminals Yn, the voltage drop across the bidirectional switch must not

exceed 0.4 V. If the switch current flows into terminal Z, no VCC current will flow out of terminals Yn, and in this case there is no limit for the voltage drop

across the switch, but the voltages at Yn and Z may not exceed VCC or VEE.

[2] For SO16 packages: above 70 °C the value of Ptot derates linearly with 8 mW/K.

For SSOP16 and TSSOP16 packages: above 60 °C the value of Ptot derates linearly with 5.5 mW/K.

For DHVQFN16 packages: above 60 °C the value of Ptot derates linearly with 4.5 mW/K.

Nexperia 74HC4051; 74HCT4051

8-channel analog multiplexer/demultiplexer

Product data sheet Rev. 9 — 26 September 2017

6 / 32

9 Recommended operating conditions

Table 5. Recommended operating conditions

74HC4051 74HCT4051Symbol Parameter Conditions

Min Typ Max Min Typ Max

Unit

see Figure 7

and Figure 8

VCC - GND 2.0 5.0 10.0 4.5 5.0 5.5 V

VCC supply voltage

VCC - VEE 2.0 5.0 10.0 2.0 5.0 10.0 V

VIinput voltage GND - VCC GND - VCC V

VSW switch voltage VEE - VCC VEE - VCC V

Tamb ambient

temperature

-40 +25 +125 -40 +25 +125 °C

VCC = 2.0 V - - 625 - - - ns/V

VCC = 4.5 V - 1.67 139 - 1.67 139 ns/V

VCC = 6.0 V - - 83 - - - ns/V

Δt/ΔV input transition

rise and fall

rate

VCC = 10.0 V - - 31 - - - ns/V

VCC - VEE (V)

0 1084 62

001aad545

operating area

VCC - GND

(V)

Figure 7. Guaranteed operating area as a function of

the supply voltages for 74HC4051

VCC - VEE (V)

0 1084 62

001aad546

VCC - GND

(V)

operating area

Figure 8. Guaranteed operating area as a function of

the supply voltages for 74HCT4051

Nexperia 74HC4051; 74HCT4051

8-channel analog multiplexer/demultiplexer

Product data sheet Rev. 9 — 26 September 2017

7 / 32

10 Static characteristics

Table 6. RON resistance per switch for 74HC4051 and 74HCT4051

VI = VIH or VIL; for test circuit see Figure 9.

Vis is the input voltage at a Yn or Z terminal, whichever is assigned as an input.

Vos is the output voltage at a Yn or Z terminal, whichever is assigned as an output.

For 74HC4051: VCC - GND or VCC - VEE = 2.0 V, 4.5 V, 6.0 V and 9.0 V.

For 74HCT4051: VCC - GND = 4.5 V and 5.5 V, VCC - VEE = 2.0 V, 4.5 V, 6.0 V and 9.0 V.

Symbol Parameter Conditions Min Typ Max Unit

Tamb = 25 °C

Vis = VCC to VEE

VCC = 2.0 V; VEE = 0 V; ISW = 100 μA [1] - - - Ω

VCC = 4.5 V; VEE = 0 V; ISW = 1000 μA - 100 180 Ω

VCC = 6.0 V; VEE = 0 V; ISW = 1000 μA - 90 160 Ω

RON(peak) ON resistance (peak)

VCC = 4.5 V; VEE = -4.5 V; ISW = 1000 μA - 70 130 Ω

Vis = VEE

VCC = 2.0 V; VEE = 0 V; ISW = 100 μA [1] - 150 - Ω

VCC = 4.5 V; VEE = 0 V; ISW = 1000 μA - 80 140 Ω

VCC = 6.0 V; VEE = 0 V; ISW = 1000 μA - 70 120 Ω

VCC = 4.5 V; VEE = -4.5 V; ISW = 1000 μA - 60 105 Ω

Vis = VCC

VCC = 2.0 V; VEE = 0 V; ISW = 100 μA [1] - 150 - Ω

VCC = 4.5 V; VEE = 0 V; ISW = 1000 μA - 90 160 Ω

VCC = 6.0 V; VEE = 0 V; ISW = 1000 μA - 80 140 Ω

RON(rail) ON resistance (rail)

VCC = 4.5 V; VEE = -4.5 V; ISW = 1000 μA - 65 120 Ω

Vis = VCC to VEE

VCC = 2.0 V; VEE = 0 V [1] - - - Ω

VCC = 4.5 V; VEE = 0 V - 9 - Ω

VCC = 6.0 V; VEE = 0 V - 8 - Ω

ΔRON ON resistance mismatch

between channels

VCC = 4.5 V; VEE = -4.5 V - 6 - Ω

Nexperia 74HC4051; 74HCT4051

8-channel analog multiplexer/demultiplexer

Product data sheet Rev. 9 — 26 September 2017

8 / 32

Symbol Parameter Conditions Min Typ Max Unit

Tamb = -40 °C to +85 °C

Vis = VCC to VEE

VCC = 2.0 V; VEE = 0 V; ISW = 100 μA [1] - - - Ω

VCC = 4.5 V; VEE = 0 V; ISW = 1000 μA - - 225 Ω

VCC = 6.0 V; VEE = 0 V; ISW = 1000 μA - - 200 Ω

RON(peak) ON resistance (peak)

VCC = 4.5 V; VEE = -4.5 V; ISW = 1000 μA - - 165 Ω

Vis = VEE

VCC = 2.0 V; VEE = 0 V; ISW = 100 μA [1] - - - Ω

VCC = 4.5 V; VEE = 0 V; ISW = 1000 μA - - 175 Ω

VCC = 6.0 V; VEE = 0 V; ISW = 1000 μA - - 150 Ω

VCC = 4.5 V; VEE = -4.5 V; ISW = 1000 μA - - 130 Ω

Vis = VCC

VCC = 2.0 V; VEE = 0 V; ISW = 100 μA [1] - - - Ω

VCC = 4.5 V; VEE = 0 V; ISW = 1000 μA - - 200 Ω

VCC = 6.0 V; VEE = 0 V; ISW = 1000 μA - - 175 Ω

RON(rail) ON resistance (rail)

VCC = 4.5 V; VEE = -4.5 V; ISW = 1000 μA - - 150 Ω

Tamb = -40 °C to +125 °C

Vis = VCC to VEE

VCC = 2.0 V; VEE = 0 V; ISW = 100 μA [1] - - - Ω

VCC = 4.5 V; VEE = 0 V; ISW = 1000 μA - - 270 Ω

VCC = 6.0 V; VEE = 0 V; ISW = 1000 μA - - 240 Ω

RON(peak) ON resistance (peak)

VCC = 4.5 V; VEE = -4.5 V; ISW = 1000 μA - - 195 Ω

Vis = VEE

VCC = 2.0 V; VEE = 0 V; ISW = 100 μA [1] - - - Ω

VCC = 4.5 V; VEE = 0 V; ISW = 1000 μA - - 210 Ω

VCC = 6.0 V; VEE = 0 V; ISW = 1000 μA - - 180 Ω

VCC = 4.5 V; VEE = -4.5 V; ISW = 1000 μA - - 160 Ω

Vis = VCC

VCC = 2.0 V; VEE = 0 V; ISW = 100 μA [1] - - - Ω

VCC = 4.5 V; VEE = 0 V; ISW = 1000 μA - - 240 Ω

VCC = 6.0 V; VEE = 0 V; ISW = 1000 μA - - 210 Ω

RON(rail) ON resistance (rail)

VCC = 4.5 V; VEE = -4.5 V; ISW = 1000 μA - - 180 Ω

[1] When supply voltages (VCC - VEE) near 2.0 V the analog switch ON resistance becomes extremely non-linear. When using a supply of 2 V, it is

recommended to use these devices only for transmitting digital signals.

Nexperia 74HC4051; 74HCT4051

8-channel analog multiplexer/demultiplexer

Product data sheet Rev. 9 — 26 September 2017

9 / 32

001aan389

Snfrom select

input

GND VEE

VCC

Vis Isw

Vsw

Vis = 0 V to (VCC - VEE).

Figure 9. Test circuit for measuring RON

Vis (V)

0 9.07.23.6 5.41.8

mnb047

110

RON

(Ω)

(1)

(2)

(3)

Vis = 0 V to (VCC - VEE).

(1) VCC = 4.5 V

(2) VCC = 6 V

(3) VCC = 9 V

Figure 10. Typical RON as a function of input voltage Vis

Table 7. Static characteristics for 74HC4051

Voltages are referenced to GND (ground = 0 V).

Vis is the input voltage at pins Yn or Z, whichever is assigned as an input.

Vos is the output voltage at pins Z or Yn, whichever is assigned as an output.

Symbol Parameter Conditions Min Typ Max Unit

Tamb = 25 °C

VCC = 2.0 V 1.5 1.2 - V

VCC = 4.5 V 3.15 2.4 - V

VCC = 6.0 V 4.2 3.2 - V

VIH HIGH-level input

voltage

VCC = 9.0 V 6.3 4.7 - V

VCC = 2.0 V - 0.8 0.5 V

VCC = 4.5 V - 2.1 1.35 V

VCC = 6.0 V - 2.8 1.8 V

VIL LOW-level input

voltage

VCC = 9.0 V - 4.3 2.7 V

VEE = 0 V; VI = VCC or GND

VCC = 6.0 V - - ±0.1 μA

IIinput leakage

current

VCC = 10.0 V - - ±0.2 μA

VCC = 10.0 V; VEE = 0 V; VI = VIH or VIL;

|VSW| = VCC - VEE; see Figure 11

per channel - - ±0.1 μA

IS(OFF) OFF-state

leakage current

all channels - - ±0.4 μA

Nexperia 74HC4051; 74HCT4051

8-channel analog multiplexer/demultiplexer

Product data sheet Rev. 9 — 26 September 2017

10 / 32

Symbol Parameter Conditions Min Typ Max Unit

IS(ON) ON-state leakage

current

VI = VIH or VIL; |VSW| = VCC - VEE;

VCC = 10.0 V; VEE = 0 V; see Figure 12

- - ±0.4 μA

VEE = 0 V; VI = VCC or GND; Vis = VEE or VCC;

Vos = VCC or VEE

VCC = 6.0 V - - 8.0 μA

ICC supply current

VCC = 10.0 V - - 16.0 μA

CIinput capacitance - 3.5 - pF

independent pins Yn - 5 - pFCsw switch

capacitance common pins Z - 25 - pF

Tamb = -40 °C to +85 °C

VCC = 2.0 V 1.5 - - V

VCC = 4.5 V 3.15 - - V

VCC = 6.0 V 4.2 - - V

VIH HIGH-level input

voltage

VCC = 9.0 V 6.3 - - V

VCC = 2.0 V - - 0.5 V

VCC = 4.5 V - - 1.35 V

VCC = 6.0 V - - 1.8 V

VIL LOW-level input

voltage

VCC = 9.0 V - - 2.7 V

VEE = 0 V; VI = VCC or GND

VCC = 6.0 V - - ±1.0 μA

IIinput leakage

current

VCC = 10.0 V - - ±2.0 μA

VCC = 10.0 V; VEE = 0 V; VI = VIH or VIL;

|VSW| = VCC - VEE; see Figure 11

per channel - - ±1.0 μA

IS(OFF) OFF-state

leakage current

all channels - - ±4.0 μA

IS(ON) ON-state leakage

current

VI = VIH or VIL; |VSW| = VCC - VEE;

VCC = 10.0 V; VEE = 0 V; see Figure 12

- - ±4.0 μA

VEE = 0 V; VI = VCC or GND; Vis = VEE or VCC;

Vos = VCC or VEE

VCC = 6.0 V - - 80.0 μA

ICC supply current

VCC = 10.0 V - - 160.0 μA

Nexperia 74HC4051; 74HCT4051

8-channel analog multiplexer/demultiplexer

Product data sheet Rev. 9 — 26 September 2017

11 / 32

Symbol Parameter Conditions Min Typ Max Unit

Tamb = -40 °C to +125 °C

VCC = 2.0 V 1.5 - - V

VCC = 4.5 V 3.15 - - V

VCC = 6.0 V 4.2 - - V

VIH HIGH-level input

voltage

VCC = 9.0 V 6.3 - - V

VCC = 2.0 V - - 0.5 V

VCC = 4.5 V - - 1.35 V

VCC = 6.0 V - - 1.8 V

VIL LOW-level input

voltage

VCC = 9.0 V - - 2.7 V

VEE = 0 V; VI = VCC or GND

VCC = 6.0 V - - ±1.0 μA

IIinput leakage

current

VCC = 10.0 V - - ±2.0 μA

VCC = 10.0 V; VEE = 0 V; VI = VIH or VIL;

|VSW| = VCC - VEE; see Figure 11

per channel - - ±1.0 μA

IS(OFF) OFF-state

leakage current

all channels - - ±4.0 μA

IS(ON) ON-state leakage

current

VI = VIH or VIL; |VSW| = VCC - VEE;

VCC = 10.0 V; VEE = 0 V; see Figure 12

- - ±4.0 μA

VEE = 0 V; VI = VCC or GND; Vis = VEE or VCC;

Vos = VCC or VEE

VCC = 6.0 V - - 160.0 μA

ICC supply current

VCC = 10.0 V - - 320.0 μA

Nexperia 74HC4051; 74HCT4051

8-channel analog multiplexer/demultiplexer

Product data sheet Rev. 9 — 26 September 2017

12 / 32

Table 8. Static characteristics for 74HCT4051

Voltages are referenced to GND (ground = 0 V).

Vis is the input voltage at pins Yn or Z, whichever is assigned as an input.

Vos is the output voltage at pins Z or Yn, whichever is assigned as an output.

Symbol Parameter Conditions Min Typ Max Unit

Tamb = 25 °C

VIH HIGH-level input

voltage

VCC = 4.5 V to 5.5 V 2.0 1.6 - V

VIL LOW-level input

voltage

VCC = 4.5 V to 5.5 V - 1.2 0.8 V

IIinput leakage

current

VI = VCC or GND; VCC = 5.5 V; VEE = 0 V - - ±0.1 μA

VCC = 10.0 V; VEE = 0 V; VI = VIH or VIL;

|VSW| = VCC - VEE; see Figure 11

per channel - - ±0.1 μA

IS(OFF) OFF-state

leakage current

all channels - - ±0.4 μA

IS(ON) ON-state

leakage current

VCC = 10.0 V; VEE = 0 V; VI = VIH or VIL;

|VSW| = VCC - VEE; see Figure 12

- - ±0.4 μA

VI = VCC or GND; Vis = VEE or VCC;

Vos = VCC or VEE

VCC = 5.5 V; VEE = 0 V - - 8.0 μA

ICC supply current

VCC = 5.0 V; VEE = -5.0 V - - 16.0 μA

ΔICC additional supply

current

per input; VI = VCC - 2.1 V; other inputs at VCC

or GND; VCC = 4.5 V to 5.5 V; VEE = 0 V

- 50 180 μA

CIinput

capacitance

- 3.5 - pF

independent pins Yn - 5 - pFCsw switch

capacitance common pins Z - 25 - pF

Nexperia 74HC4051; 74HCT4051

8-channel analog multiplexer/demultiplexer

Product data sheet Rev. 9 — 26 September 2017

13 / 32

Symbol Parameter Conditions Min Typ Max Unit

Tamb = -40 °C to +85 °C

VIH HIGH-level input

voltage

VCC = 4.5 V to 5.5 V 2.0 - - V

VIL LOW-level input

voltage

VCC = 4.5 V to 5.5 V - - 0.8 V

IIinput leakage

current

VI = VCC or GND; VCC = 5.5 V; VEE = 0 V - - ±1.0 μA

VCC = 10.0 V; VEE = 0 V; VI = VIH or VIL;

|VSW| = VCC - VEE; see Figure 11

per channel - - ±1.0 μA

IS(OFF) OFF-state

leakage current

all channels - - ±4.0 μA

IS(ON) ON-state

leakage current

VCC = 10.0 V; VEE = 0 V; VI = VIH or VIL;

|VSW| = VCC - VEE; see Figure 12

- - ±4.0 μA

VI = VCC or GND; Vis = VEE or VCC;

Vos = VCC or VEE

VCC = 5.5 V; VEE = 0 V - - 80.0 μA

ICC supply current

VCC = 5.0 V; VEE = -5.0 V - - 160.0 μA

ΔICC additional supply

current

per input; VI = VCC - 2.1 V; other inputs at VCC

or GND; VCC = 4.5 V to 5.5 V; VEE = 0 V

- - 225 μA

Tamb = -40 °C to +125 °C

VIH HIGH-level input

voltage

VCC = 4.5 V to 5.5 V 2.0 - - V

VIL LOW-level input

voltage

VCC = 4.5 V to 5.5 V - - 0.8 V

IIinput leakage

current

VI = VCC or GND; VCC = 5.5 V; VEE = 0 V - - ±1.0 μA

VCC = 10.0 V; VEE = 0 V; VI = VIH or VIL;

|VSW| = VCC - VEE; see Figure 11

per channel - - ±1.0 μA

IS(OFF) OFF-state

leakage current

all channels - - ±4.0 μA

IS(ON) ON-state

leakage current

VCC = 10.0 V; VEE = 0 V; VI = VIH or VIL;

|VSW| = VCC - VEE; see Figure 12

- - ±4.0 μA

VI = VCC or GND; Vis = VEE or VCC;

Vos = VCC or VEE

VCC = 5.5 V; VEE = 0 V - - 160.0 μA

ICC supply current

VCC = 5.0 V; VEE = -5.0 V - - 320.0 μA

ΔICC additional supply

current

per input; VI = VCC - 2.1 V; other inputs at VCC

or GND; VCC = 4.5 V to 5.5 V; VEE = 0 V

- - 245 μA

Nexperia 74HC4051; 74HCT4051

8-channel analog multiplexer/demultiplexer

Product data sheet Rev. 9 — 26 September 2017

14 / 32

001aah827

nYn

Snfrom select

input

GND VEE

VCC

Vis Vos

Isw

Vis = VCC and Vos = VEE.

Vis = VEE and Vos = VCC.

Figure 11. Test circuit for measuring OFF-state current

Isw

001aah828

nYn

HIGH

from select

input

GND VEE

VCC

Vis

Vos

Vis = VCC and Vos = open-circuit.

Vis = VEE and Vos = open-circuit.

Figure 12. Test circuit for measuring ON-state current

Nexperia 74HC4051; 74HCT4051

8-channel analog multiplexer/demultiplexer

Product data sheet Rev. 9 — 26 September 2017

15 / 32

11 Dynamic characteristics

Table 9. Dynamic characteristics for 74HC4051

GND = 0 V; tr = tf = 6 ns; CL = 50 pF; for test circuit see Figure 15.

Vis is the input voltage at a Yn or Z terminal, whichever is assigned as an input.

Vos is the output voltage at a Yn or Z terminal, whichever is assigned as an output.

Symbol Parameter Conditions Min Typ Max Unit

Tamb = 25 °C

Vis to Vos; RL = ∞ Ω; see Figure 13 [1]

VCC = 2.0 V; VEE = 0 V - 14 60 ns

VCC = 4.5 V; VEE = 0 V - 5 12 ns

VCC = 6.0 V; VEE = 0 V - 4 10 ns

tpd propagation delay

VCC = 4.5 V; VEE = -4.5 V - 4 8 ns

E to Vos; RL = ∞ Ω; see Figure 14 [2]

VCC = 2.0 V; VEE = 0 V - 72 345 ns

VCC = 4.5 V; VEE = 0 V - 29 69 ns

VCC = 5.0 V; VEE = 0 V; CL = 15 pF - 22 - ns

VCC = 6.0 V; VEE = 0 V - 21 59 ns

VCC = 4.5 V; VEE = -4.5 V - 18 51 ns

Sn to Vos; RL = ∞ Ω; see Figure 14 [2]

VCC = 2.0 V; VEE = 0 V - 66 345 ns

VCC = 4.5 V; VEE = 0 V - 28 69 ns

VCC = 5.0 V; VEE = 0 V; CL = 15 pF - 20 - ns

VCC = 6.0 V; VEE = 0 V - 19 59 ns

ton turn-on time

VCC = 4.5 V; VEE = -4.5 V - 16 51 ns

E to Vos; RL = 1 kΩ; see Figure 14 [3]

VCC = 2.0 V; VEE = 0 V - 58 290 ns

VCC = 4.5 V; VEE = 0 V - 31 58 ns

VCC = 5.0 V; VEE = 0 V; CL = 15 pF - 18 - ns

VCC = 6.0 V; VEE = 0 V - 17 49 ns

VCC = 4.5 V; VEE = -4.5 V - 18 42 ns

Sn to Vos; RL = 1 kΩ; see Figure 14 [3]

VCC = 2.0 V; VEE = 0 V - 61 290 ns

VCC = 4.5 V; VEE = 0 V - 25 58 ns

VCC = 5.0 V; VEE = 0 V; CL = 15 pF - 19 - ns

VCC = 6.0 V; VEE = 0 V - 18 49 ns

toff turn-off time

VCC = 4.5 V; VEE = -4.5 V - 18 42 ns

Nexperia 74HC4051; 74HCT4051

8-channel analog multiplexer/demultiplexer

Product data sheet Rev. 9 — 26 September 2017

16 / 32

Symbol Parameter Conditions Min Typ Max Unit

CPD power dissipation

capacitance

per switch; VI = GND to VCC

[4] - 25 - pF

Tamb = -40 °C to +85 °C

Vis to Vos; RL = ∞ Ω; see Figure 13 [1]

VCC = 2.0 V; VEE = 0 V - - 75 ns

VCC = 4.5 V; VEE = 0 V - - 15 ns

VCC = 6.0 V; VEE = 0 V - - 13 ns

tpd propagation delay

VCC = 4.5 V; VEE = -4.5 V - - 10 ns

E to Vos; RL = ∞ Ω; see Figure 14 [2]

VCC = 2.0 V; VEE = 0 V - - 430 ns

VCC = 4.5 V; VEE = 0 V - - 86 ns

VCC = 6.0 V; VEE = 0 V - - 73 ns

VCC = 4.5 V; VEE = -4.5 V - - 64 ns

Sn to Vos; RL = ∞ Ω; see Figure 14 [2]

VCC = 2.0 V; VEE = 0 V - - 430 ns

VCC = 4.5 V; VEE = 0 V - - 86 ns

VCC = 6.0 V; VEE = 0 V - - 73 ns

ton turn-on time

VCC = 4.5 V; VEE = -4.5 V - - 64 ns

E to Vos; RL = 1 kΩ; see Figure 14 [3]

VCC = 2.0 V; VEE = 0 V - - 365 ns

VCC = 4.5 V; VEE = 0 V - - 73 ns

VCC = 6.0 V; VEE = 0 V - - 62 ns

VCC = 4.5 V; VEE = -4.5 V - - 53 ns

Sn to Vos; RL = 1 kΩ; see Figure 14 [3]

VCC = 2.0 V; VEE = 0 V - - 365 ns

VCC = 4.5 V; VEE = 0 V - - 73 ns

VCC = 6.0 V; VEE = 0 V - - 62 ns

toff turn-off time

VCC = 4.5 V; VEE = -4.5 V - - 53 ns

Nexperia 74HC4051; 74HCT4051

8-channel analog multiplexer/demultiplexer

Product data sheet Rev. 9 — 26 September 2017

17 / 32

Symbol Parameter Conditions Min Typ Max Unit

Tamb = -40 °C to +125 °C

Vis to Vos; RL = ∞ Ω; see Figure 13 [1]

VCC = 2.0 V; VEE = 0 V - - 90 ns

VCC = 4.5 V; VEE = 0 V - - 18 ns

VCC = 6.0 V; VEE = 0 V - - 15 ns

tpd propagation delay

VCC = 4.5 V; VEE = -4.5 V - - 12 ns

E to Vos; RL = ∞ Ω; see Figure 14 [2]

VCC = 2.0 V; VEE = 0 V - - 520 ns

VCC = 4.5 V; VEE = 0 V - - 104 ns

VCC = 6.0 V; VEE = 0 V - - 88 ns

VCC = 4.5 V; VEE = -4.5 V - - 77 ns

Sn to Vos; RL = ∞ Ω; see Figure 14 [2]

VCC = 2.0 V; VEE = 0 V - - 520 ns

VCC = 4.5 V; VEE = 0 V - - 104 ns

VCC = 6.0 V; VEE = 0 V - - 88 ns

ton turn-on time

VCC = 4.5 V; VEE = -4.5 V - - 77 ns

E to Vos; RL = 1 kΩ; see Figure 14 [3]

VCC = 2.0 V; VEE = 0 V - - 435 ns

VCC = 4.5 V; VEE = 0 V - - 87 ns

VCC = 6.0 V; VEE = 0 V - - 74 ns

VCC = 4.5 V; VEE = -4.5 V - - 72 ns

Sn to Vos; RL = 1 kΩ; see Figure 14 [3]

VCC = 2.0 V; VEE = 0 V - - 435 ns

VCC = 4.5 V; VEE = 0 V - - 87 ns

VCC = 6.0 V; VEE = 0 V - - 74 ns

toff turn-off time

VCC = 4.5 V; VEE = -4.5 V - - 72 ns

[1] tpd is the same as tPHL and tPLH.

[2] ton is the same as tPZH and tPZL.

[3] toff is the same as tPHZ and tPLZ.

[4] CPD is used to determine the dynamic power dissipation (PD in μW).

PD = CPD x VCC

2 x fi x N + Σ{(CL + Csw) x VCC

2 x fo} where:

fi = input frequency in MHz;

fo = output frequency in MHz;

N = number of inputs switching;

Σ{(CL + Csw) x VCC

2 x fo} = sum of outputs;

CL = output load capacitance in pF;

Csw = switch capacitance in pF;

VCC = supply voltage in V.

Nexperia 74HC4051; 74HCT4051

8-channel analog multiplexer/demultiplexer

Product data sheet Rev. 9 — 26 September 2017

18 / 32

Table 10. Dynamic characteristics for 74HCT4051

GND = 0 V; tr = tf = 6 ns; CL = 50 pF; for test circuit see Figure 15.

Vis is the input voltage at a Yn or Z terminal, whichever is assigned as an input.

Vos is the output voltage at a Yn or Z terminal, whichever is assigned as an output.

Symbol Parameter Conditions Min Typ Max Unit

Tamb = 25 °C

Vis to Vos; RL = ∞ Ω; see Figure 13 [1]

VCC = 4.5 V; VEE = 0 V - 5 12 ns

tpd propagation delay

VCC = 4.5 V; VEE = -4.5 V - 4 8 ns

E to Vos; RL = 1 kΩ; see Figure 14 [2]

VCC = 4.5 V; VEE = 0 V - 26 55 ns

VCC = 5.0 V; VEE = 0 V; CL = 15 pF - 22 - ns

VCC = 4.5 V; VEE = -4.5 V - 16 39 ns

Sn to Vos; RL = 1 kΩ; see Figure 14 [2]

VCC = 4.5 V; VEE = 0 V - 28 55 ns

VCC = 5.0 V; VEE = 0 V; CL = 15 pF - 24 - ns

ton turn-on time

VCC = 4.5 V; VEE = -4.5 V - 16 39 ns

E to Vos; RL = 1 kΩ; see Figure 14 [3]

VCC = 4.5 V; VEE = 0 V - 19 45 ns

VCC = 5.0 V; VEE = 0 V; CL = 15 pF - 16 - ns

VCC = 4.5 V; VEE = -4.5 V - 16 32 ns

Sn to Vos; RL = 1 kΩ; see Figure 14 [3]

VCC = 4.5 V; VEE = 0 V - 23 45 ns

VCC = 5.0 V; VEE = 0 V; CL = 15 pF - 20 - ns

toff turn-off time

VCC = 4.5 V; VEE = -4.5 V - 16 32 ns

CPD power dissipation

capacitance

per switch; VI = GND to VCC - 1.5 V [4] - 25 - pF

Tamb = -40 °C to +85 °C

Vis to Vos; RL = ∞ Ω; see Figure 13 [1]

VCC = 4.5 V; VEE = 0 V - - 15 ns

tpd propagation delay

VCC = 4.5 V; VEE = -4.5 V - - 10 ns

E to Vos; RL = 1 kΩ; see Figure 14 [2]

VCC = 4.5 V; VEE = 0 V - - 69 ns

VCC = 4.5 V; VEE = -4.5 V - - 49 ns

Sn to Vos; RL = 1 kΩ; see Figure 14 [2]

VCC = 4.5 V; VEE = 0 V - - 69 ns

ton turn-on time

VCC = 4.5 V; VEE = -4.5 V - - 49 ns

Nexperia 74HC4051; 74HCT4051

8-channel analog multiplexer/demultiplexer

Product data sheet Rev. 9 — 26 September 2017

19 / 32

Symbol Parameter Conditions Min Typ Max Unit

E to Vos; RL = 1 kΩ; see Figure 14 [3]

VCC = 4.5 V; VEE = 0 V - - 56 ns

VCC = 4.5 V; VEE = -4.5 V - - 40 ns

Sn to Vos; RL = 1 kΩ; see Figure 14 [3]

VCC = 4.5 V; VEE = 0 V - - 56 ns

toff turn-off time

VCC = 4.5 V; VEE = -4.5 V - - 40 ns

Tamb = -40 °C to +125 °C

Vis to Vos; RL = ∞ Ω; see Figure 13 [1]

VCC = 4.5 V; VEE = 0 V - - 18 ns

tpd propagation delay

VCC = 4.5 V; VEE = -4.5 V - - 12 ns

E to Vos; RL = 1 kΩ; see Figure 14 [2]

VCC = 4.5 V; VEE = 0 V - - 83 ns

VCC = 4.5 V; VEE = -4.5 V - - 59 ns

Sn to Vos; RL = 1 kΩ; see Figure 14 [2]

VCC = 4.5 V; VEE = 0 V - - 83 ns

ton turn-on time

VCC = 4.5 V; VEE = -4.5 V - - 59 ns

E to Vos; RL = 1 kΩ; see Figure 14 [3]

VCC = 4.5 V; VEE = 0 V - - 68 ns

VCC = 4.5 V; VEE = -4.5 V - - 48 ns

Sn to Vos; RL = 1 kΩ; see Figure 14 [3]

VCC = 4.5 V; VEE = 0 V - - 68 ns

toff turn-off time

VCC = 4.5 V; VEE = -4.5 V - - 48 ns

[1] tpd is the same as tPHL and tPLH.

[2] ton is the same as tPZH and tPZL.

[3] toff is the same as tPHZ and tPLZ.

[4] CPD is used to determine the dynamic power dissipation (PD in μW).

PD = CPD x VCC

2 x fi x N + Σ{(CL + Csw) x VCC

2 x fo} where:

fi = input frequency in MHz;

fo = output frequency in MHz;

N = number of inputs switching;

Σ{(CL + Csw) x VCC

2 x fo} = sum of outputs;

CL = output load capacitance in pF;

Csw = switch capacitance in pF;

VCC = supply voltage in V.

Nexperia 74HC4051; 74HCT4051

8-channel analog multiplexer/demultiplexer

Product data sheet Rev. 9 — 26 September 2017

20 / 32

001aad555

tPLH tPHL

50 %

Vis input

Vos output

Figure 13. Input (Vis) to output (Vos) propagation delays

001aad556

tPLZ

tPHZ

switch OFF switch ON

switch ON

Vos output

E, Sn inputs VM

0 V

90 %

10 %

tPZL

tPZH

50 %

For 74HC4051: VM = 0.5 x VCC.

For 74HCT4051: VM = 1.3 V.

Figure 14. Turn-on and turn-off times

Nexperia 74HC4051; 74HCT4051

8-channel analog multiplexer/demultiplexer

Product data sheet Rev. 9 — 26 September 2017

21 / 32

VMVM

10 %

90 %

0 V

negative

pulse

positive

pulse

0 V

VMVM

90 %

10 %

001aae382

VCC VCC

open

GND

VEE

VIVos

DUT

RLS1

PULSE

GENERATOR

Vis

Definitions for test circuit; see Table 11:

RT = termination resistance should be equal to the output impedance Zo of the pulse generator.

CL = load capacitance including jig and probe capacitance.

RL = load resistance.

S1 = Test selection switch.

Figure 15. Test circuit for measuring switching times

Table 11. Test data

Input Load

tr, tf

Test

VIVis

at fmax other [1]

CLRL

S1 position

tPHL, tPLH

[2] pulse < 2 ns 6 ns 50 pF 1 kΩ open

tPZH, tPHZ

[2] VCC < 2 ns 6 ns 50 pF 1 kΩ VEE

tPZL, tPLZ

[2] VEE < 2 ns 6 ns 50 pF 1 kΩ VCC

[1] tr = tf = 6 ns; when measuring fmax, there is no constraint to tr and tf with 50 % duty factor.

[2] VI values:

For 74HC4051: VI = VCC

For 74HCT4051: VI = 3 V

Nexperia 74HC4051; 74HCT4051

8-channel analog multiplexer/demultiplexer

Product data sheet Rev. 9 — 26 September 2017

22 / 32

11.1 Additional dynamic characteristics

Table 12. Additional dynamic characteristics

Recommended conditions and typical values; GND = 0 V; Tamb = 25 °C; CL = 50 pF.

Vis is the input voltage at pins nYn or nZ, whichever is assigned as an input.

Vos is the output voltage at pins nYn or nZ, whichever is assigned as an output.

Symbol Parameter Conditions Min Typ Max Unit

fi = 1 kHz; RL = 10 kΩ; see Figure 16

Vis = 4.0 V (p-p); VCC = 2.25 V; VEE = -2.25 V - 0.04 - %

Vis = 8.0 V (p-p); VCC = 4.5 V; VEE = -4.5 V - 0.02 - %

fi = 10 kHz; RL = 10 kΩ; see Figure 16

Vis = 4.0 V (p-p); VCC = 2.25 V; VEE = -2.25 V - 0.12 - %

dsin sine-wave distortion

Vis = 8.0 V (p-p); VCC = 4.5 V; VEE = -4.5 V - 0.06 - %

RL = 600 Ω; fi = 1 MHz; see Figure 17

VCC = 2.25 V; VEE = -2.25 V [1] - -50 - dB

αiso isolation (OFF-state)

VCC = 4.5 V; VEE = -4.5 V [1] - -50 - dB

peak-to-peak value; between control and any

switch; RL = 600 Ω; fi = 1 MHz; E or Sn square

wave between VCC and GND; tr = tf = 6 ns; see

Figure 18

VCC = 4.5 V; VEE = 0 V - 110 - mV

Vct crosstalk voltage

VCC = 4.5 V; VEE = -4.5 V - 220 - mV

RL = 50 Ω; see Figure 19

VCC = 2.25 V; VEE = -2.25 V [2] - 170 - MHz

f(-3dB) -3 dB frequency response

VCC = 4.5 V; VEE = -4.5 V [2] - 180 - MHz

[1] Adjust input voltage Vis to 0 dBm level (0 dBm = 1 mW into 600 Ω).

[2] Adjust input voltage Vis to 0 dBm level at Vos for 1 MHz (0 dBm = 1 mW into 50 Ω).

001aan385

Yn/Z

10 µF

Vis Vos

Z/Yn

GNDVEE

VCC

Figure 16. Test circuit for measuring sine-wave distortion

Nexperia 74HC4051; 74HCT4051

8-channel analog multiplexer/demultiplexer

Product data sheet Rev. 9 — 26 September 2017

23 / 32

001aan386

Yn/Z

0.1 µF

Vis Vos

Z/Yn

GNDVEE

VCC

VCC = 4.5 V; GND = 0 V; VEE = -4.5 V; RL = 600 Ω; RS = 1 kΩ.

a. Test circuit

001aae332

fi(kHz)

10 105106

104

102103

- 60

- 40

- 80

- 20

αiso

(dB)

- 100

b. Isolation (OFF-state) as a function of frequency

Figure 17. Test circuit for measuring isolation (OFF-state)

oscilloscope

001aan387

Vct

2RL2RL

Sn, E

GNDVEE

VCC

Figure 18. Test circuit for measuring crosstalk between control input and any switch

Nexperia 74HC4051; 74HCT4051

8-channel analog multiplexer/demultiplexer

Product data sheet Rev. 9 — 26 September 2017

24 / 32

001aan385

Yn/Z

10 µF

Vis Vos

Z/Yn

GNDVEE

VCC

VCC = 4.5 V; GND = 0 V; VEE = -4.5 V; RL = 50 Ω; RS = 1 kΩ.

a. Test circuit

001aad551

f (kHz)

10 105106

104

102103

- 1

- 3

Vos

(dB)

- 5

b. Typical frequency response

Figure 19. Test circuit for frequency response

Nexperia 74HC4051; 74HCT4051

8-channel analog multiplexer/demultiplexer

Product data sheet Rev. 9 — 26 September 2017

25 / 32

12 Package outline

detail X

vMA

(A )

pin 1 index

UNIT A

max. A1A2A3bpc D(1) E(1) (1)

e HEL LpQ Zywv θ

REFERENCES

OUTLINE

VERSION

EUROPEAN

PROJECTION ISSUE DATE

IEC JEDEC JEITA

inches

1.75 0.25

0.10

1.45

1.25 0.25 0.49

0.36

0.25

0.19

10.0

9.8

4.0

3.8 1.27 6.2

5.8

0.7

0.6

0.7

0.3 8

0.25 0.1

DIMENSIONS (inch dimensions are derived from the original mm dimensions)

Note

1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included.

1.0

0.4

SOT109-1 99-12-27

03-02-19

076E07 MS-012

0.069 0.010

0.004

0.057

0.049 0.01 0.019

0.014

0.0100

0.0075

0.39

0.38

0.16

0.15 0.05

1.05

0.041

0.244

0.228

0.028

0.020

0.028

0.012

0.01

0.25

0.01 0.004

0.039

0.016

0 2.5 5 mm

scale

SO16: plastic small outline package; 16 leads; body width 3.9 mm SOT109-1

Figure 20. Package outline SOT109-1 (SO16)

Nexperia 74HC4051; 74HCT4051

8-channel analog multiplexer/demultiplexer

Product data sheet Rev. 9 — 26 September 2017

26 / 32

UNIT A1A2A3bpc D (1) E(1) e HEL LpQ Zywv θ

REFERENCES

OUTLINE

VERSION

EUROPEAN

PROJECTION ISSUE DATE

IEC JEDEC JEITA

mm 0.21

0.05

1.80

1.65 0.25 0.38

0.25

0.20

0.09

6.4

6.0

5.4

5.2 0.65 1.25

7.9

7.6

1.03

0.63

0.9

0.7

1.00

0.55

0.130.2 0.1

DIMENSIONS (mm are the original dimensions)

Note

1. Plastic or metal protrusions of 0.25 mm maximum per side are not included.

SOT338-1 99-12-27

03-02-19

(1)

vMA

16 9

detail X

(A )

MO-150

pin 1 index

0 2.5 5 mm

scale

SSOP16: plastic shrink small outline package; 16 leads; body width 5.3 mm SOT338-1

max.

Figure 21. Package outline SOT338-1 (SSOP16)

Nexperia 74HC4051; 74HCT4051

8-channel analog multiplexer/demultiplexer

Product data sheet Rev. 9 — 26 September 2017

27 / 32

UNIT A1A2A3bpc D (1) E(2) (1)

e HEL LpQ Zywv θ

REFERENCES

OUTLINE

VERSION

EUROPEAN

PROJECTION ISSUE DATE

IEC JEDEC JEITA

mm 0.15

0.05

0.95

0.80

0.30

0.19

0.2

0.1

5.1

4.9

4.5

4.3 0.65 6.6

6.2

0.4

0.3

0.40

0.06

0.13 0.10.21

DIMENSIONS (mm are the original dimensions)

Notes

1. Plastic or metal protrusions of 0.15 mm maximum per side are not included.

2. Plastic interlead protrusions of 0.25 mm maximum per side are not included.

0.75

0.50

SOT403-1 MO-153 99-12-27

03-02-18

0.25

1 8

16 9

detail X

(A )

vMA

0 2.5 5 mm

scale

TSSOP16: plastic thin shrink small outline package; 16 leads; body width 4.4 mm SOT403-1

max.

1.1

pin 1 index

Figure 22. Package outline SOT403-1 (TSSOP16)

Nexperia 74HC4051; 74HCT4051

8-channel analog multiplexer/demultiplexer

Product data sheet Rev. 9 — 26 September 2017

28 / 32

terminal 1

index area

0.51

A1Eh

UNIT ye

0.2

REFERENCES

OUTLINE

VERSION

EUROPEAN

PROJECTION ISSUE DATE

IEC JEDEC JEITA

mm 3.6

3.4

2.15

1.85

2.6

2.4

1.15

0.85

2.5

0.30

0.18

0.05

0.00 0.05 0.1

DIMENSIONS (mm are the original dimensions)

SOT763-1 MO-241 - - -- - -

0.5

0.3

0.1

0.05

0 2.5 5 mm

scale

SOT763-1

DHVQFN16: plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads;

16 terminals; body 2.5 x 3.5 x 0.85 mm

A(1)

max.

detail X

y1C

2 7

15 10

B A

terminal 1

index area

E(1)

Note

1. Plastic or metal protrusions of 0.075 mm maximum per side are not included.

D(1)

02-10-17

03-01-27

Figure 23. Package outline SOT763-1 (DHVQFN16)

Nexperia 74HC4051; 74HCT4051

8-channel analog multiplexer/demultiplexer

Product data sheet Rev. 9 — 26 September 2017

29 / 32

13 Abbreviations

Table 13. Abbreviations

Acronym Description

CDM Charged Device Model

DUT Device Under Test

ESD ElectroStatic Discharge

HBM Human Body Model

MM Machine Model

14 Revision history

Table 14. Revision history

Document ID Release date Data sheet status Change notice Supersedes

74HC_HCT4051 v.9 20170926 Product data sheet - 74HC_HCT4051 v.8

Modifications: •The format of this data sheet has been redesigned to comply with the identity guidelines of

Nexperia.

•Legal texts have been adapted to the new company name where appropriate.

74HC_HCT4051 v.8 20160205 Product data sheet - 74HC_HCT4051 v.7

Modifications: •Type numbers 74HC4051N and 74HCT4051N (SOT38-4) removed.

74HC_HCT4051 v.7 20120719 Product data sheet - 74HC_HCT4051 v.6

Modifications: •CDM added to features.

74HC_HCT4051 v.6 20111213 Product data sheet - 74HC_HCT4051 v.5

Modifications: •Legal pages updated.

74HC_HCT4051 v.5 20110513 Product data sheet - 74HC_HCT4051 v.4

74HC_HCT4051 v.4 20110117 Product data sheet - 74HC_HCT4051 v.3

74HC_HCT4051 v.3 20051219 Product specification - 74HC_HCT4051_CNV_2

Nexperia 74HC4051; 74HCT4051

8-channel analog multiplexer/demultiplexer

Product data sheet Rev. 9 — 26 September 2017

30 / 32

15 Legal information

15.1 Data sheet status

Document status[1][2] Product status[3] Definition

Objective [short] data sheet Development This document contains data from the objective specification for product

development.

Preliminary [short] data sheet Qualification This document contains data from the preliminary specification.

Product [short] data sheet Production This document contains the product specification.

[1] Please consult the most recently issued document before initiating or completing a design.

[2] The term 'short data sheet' is explained in section "Definitions".

[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple

devices. The latest product status information is available on the Internet at URL http://www.nexperia.com.

15.2 Definitions

Draft — The document is a draft version only. The content is still under

internal review and subject to formal approval, which may result in

modifications or additions. Nexperia does not give any representations or

warranties as to the accuracy or completeness of information included herein

and shall have no liability for the consequences of use of such information.

Short data sheet — A short data sheet is an extract from a full data sheet

with the same product type number(s) and title. A short data sheet is

intended for quick reference only and should not be relied upon to contain

detailed and full information. For detailed and full information see the

relevant full data sheet, which is available on request via the local Nexperia

sales office. In case of any inconsistency or conflict with the short data sheet,

the full data sheet shall prevail.

Product specification — The information and data provided in a Product

data sheet shall define the specification of the product as agreed between

Nexperia and its customer, unless Nexperia and customer have explicitly

agreed otherwise in writing. In no event however, shall an agreement be

valid in which the Nexperia product is deemed to offer functions and qualities

beyond those described in the Product data sheet.

15.3 Disclaimers

Limited warranty and liability — Information in this document is believed

to be accurate and reliable. However, Nexperia does not give any

representations or warranties, expressed or implied, as to the accuracy

or completeness of such information and shall have no liability for the

consequences of use of such information. Nexperia takes no responsibility

for the content in this document if provided by an information source outside

of Nexperia. In no event shall Nexperia be liable for any indirect, incidental,

punitive, special or consequential damages (including - without limitation -

lost profits, lost savings, business interruption, costs related to the removal

or replacement of any products or rework charges) whether or not such

damages are based on tort (including negligence), warranty, breach of

contract or any other legal theory. Notwithstanding any damages that

customer might incur for any reason whatsoever, Nexperia's aggregate and

cumulative liability towards customer for the products described herein shall

be limited in accordance with the Terms and conditions of commercial sale of

Nexperia.

Right to make changes — Nexperia reserves the right to make changes

to information published in this document, including without limitation

specifications and product descriptions, at any time and without notice. This

document supersedes and replaces all information supplied prior to the

publication hereof.

Suitability for use — Nexperia products are not designed, authorized or

warranted to be suitable for use in life support, life-critical or safety-critical

systems or equipment, nor in applications where failure or malfunction

of an Nexperia product can reasonably be expected to result in personal

injury, death or severe property or environmental damage. Nexperia and its

suppliers accept no liability for inclusion and/or use of Nexperia products in

such equipment or applications and therefore such inclusion and/or use is at

the customer’s own risk.

Applications — Applications that are described herein for any of these

products are for illustrative purposes only. Nexperia makes no representation

or warranty that such applications will be suitable for the specified use

without further testing or modification. Customers are responsible for the

design and operation of their applications and products using Nexperia

products, and Nexperia accepts no liability for any assistance with

applications or customer product design. It is customer’s sole responsibility

to determine whether the Nexperia product is suitable and fit for the

customer’s applications and products planned, as well as for the planned

application and use of customer’s third party customer(s). Customers should

provide appropriate design and operating safeguards to minimize the risks

associated with their applications and products. Nexperia does not accept

any liability related to any default, damage, costs or problem which is based

on any weakness or default in the customer’s applications or products, or

the application or use by customer’s third party customer(s). Customer is

responsible for doing all necessary testing for the customer’s applications

and products using Nexperia products in order to avoid a default of the

applications and the products or of the application or use by customer’s third

party customer(s). Nexperia does not accept any liability in this respect.

Limiting values — Stress above one or more limiting values (as defined in

the Absolute Maximum Ratings System of IEC 60134) will cause permanent

damage to the device. Limiting values are stress ratings only and (proper)

operation of the device at these or any other conditions above those

given in the Recommended operating conditions section (if present) or the

Characteristics sections of this document is not warranted. Constant or

repeated exposure to limiting values will permanently and irreversibly affect

the quality and reliability of the device.

Terms and conditions of commercial sale — Nexperia products are

sold subject to the general terms and conditions of commercial sale, as

published at http://www.nexperia.com/profile/terms, unless otherwise agreed

in a valid written individual agreement. In case an individual agreement is

concluded only the terms and conditions of the respective agreement shall

apply. Nexperia hereby expressly objects to applying the customer’s general

terms and conditions with regard to the purchase of Nexperia products by

customer.

No offer to sell or license — Nothing in this document may be interpreted

or construed as an offer to sell products that is open for acceptance or

the grant, conveyance or implication of any license under any copyrights,

patents or other industrial or intellectual property rights.

Export control — This document as well as the item(s) described herein

may be subject to export control regulations. Export might require a prior

authorization from competent authorities.

Nexperia 74HC4051; 74HCT4051

8-channel analog multiplexer/demultiplexer

Product data sheet Rev. 9 — 26 September 2017

31 / 32

Non-automotive qualified products — Unless this data sheet expressly

states that this specific Nexperia product is automotive qualified, the

product is not suitable for automotive use. It is neither qualified nor tested in

accordance with automotive testing or application requirements. Nexperia

accepts no liability for inclusion and/or use of non-automotive qualified

products in automotive equipment or applications. In the event that customer

uses the product for design-in and use in automotive applications to

automotive specifications and standards, customer (a) shall use the product

without Nexperia's warranty of the product for such automotive applications,

use and specifications, and (b) whenever customer uses the product for

automotive applications beyond Nexperia's specifications such use shall be

solely at customer’s own risk, and (c) customer fully indemnifies Nexperia

for any liability, damages or failed product claims resulting from customer

design and use of the product for automotive applications beyond Nexperia's

standard warranty and Nexperia's product specifications.

Translations — A non-English (translated) version of a document is for

reference only. The English version shall prevail in case of any discrepancy

between the translated and English versions.

15.4 Trademarks

Notice: All referenced brands, product names, service names and

trademarks are the property of their respective owners.

Nexperia 74HC4051; 74HCT4051

8-channel analog multiplexer/demultiplexer

Please be aware that important notices concerning this document and the product(s)

described herein, have been included in section 'Legal information'.

For more information, please visit: http://www.nexperia.com

For sales office addresses, please send an email to: salesaddresses@nexperia.com

Date of release: 26 September 2017

Document identifier: 74HC_HCT4051

Contents

1 General description ............................................ 1

2 Features and benefits .........................................1

3 Applications .........................................................1

4 Ordering information .......................................... 2

5 Functional diagram ............................................. 2

6 Pinning information ............................................ 4

6.1 Pinning ............................................................... 4

6.2 Pin description ................................................... 4

7 Function description ...........................................5

8 Limiting values ....................................................5

9 Recommended operating conditions ................ 6

10 Static characteristics .......................................... 7

11 Dynamic characteristics ...................................15

11.1 Additional dynamic characteristics ...................22

12 Package outline .................................................25

13 Abbreviations .................................................... 29

14 Revision history ................................................ 29

15 Legal information .............................................. 30