AM26LS31C, AM26LS31M QUADRUPLE DIFFERENTIAL LINE DRIVER www.ti.com SLLS114I - JANUARY 1979 - REVISED FEBRUARY 2006 FEATURES DESCRIPTION/ORDERING INFORMATION 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 VCC 4A 4Y 4Z G 3Z 3Y 3A NC V CC 3 2 1 20 19 4A 1A FK PACKAGE (TOP VIEW) 1Z 4 18 4Y G 5 17 4Z NC 6 16 NC 2Z 7 15 G 2Y 8 14 3Z 3Y 10 11 12 13 3A 9 NC The AM26LS31 is a quadruple complementary-output line driver designed to meet the requirements of ANSI TIA/EIA-422-B and ITU (formerly CCITT) Recommendation V.11. The 3-state outputs have high-current capability for driving balanced lines such as twisted-pair or parallel-wire transmission lines, and they are in the high-impedance state in the power-off condition. The enable function is common to all four drivers and offers the choice of an active-high or active-low enable (G, G) input. Low-power Schottky circuitry reduces power consumption without sacrificing speed. 1 GND * 1A 1Y 1Z G 2Z 2Y 2A GND 1Y * * * * D, DB, N, NS, J, OR W PACKAGE (TOP VIEW) Meets or Exceeds the Requirements of ANSI TIA/EIA-422-B and ITU Operates From a Single 5-V Supply TTL Compatible Complementary Outputs High Output Impedance in Power-Off Conditions Complementary Output-Enable Inputs 2A * ORDERING INFORMATION PACKAGE (1) TA PDIP - N 0C to 70C -55C to 125C (1) ORDERABLE PART NUMBER TOP-SIDE MARKING Tube AM26LS31CN Tube AM26LS31CD Tape and reel AM26LS31CDR SOP - NS Tape and reel AM26LS31CNSR 26LS31 SSOP - DB Tape and reel AM26LS31CDBR SA31C CDIP - J Tube AM26LS31MJB AM26LS31MJB LCCC - FK Tube AM26LS31MFKB AM26LS31MFKB CFP - W Tube AM26LS31MWB AM26LS31MWB SOIC - D AM26LS31CN AM26LS31C Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 1979-2006, Texas Instruments Incorporated AM26LS31C, AM26LS31M QUADRUPLE DIFFERENTIAL LINE DRIVER www.ti.com SLLS114I - JANUARY 1979 - REVISED FEBRUARY 2006 FUNCTION TABLE (1) (EACH DRIVER) INPUT A (1) ENABLES OUTPUTS G G Y Z H H X H L L H X L H H X L H L L X L L H X L H Z Z H = high level, L = low level, X = irrelevant, Z = high impedance (off) LOGIC DIAGRAM (POSITIVE LOGIC) G G 4 12 2 1A 1 3 6 2A 7 5 10 3A 9 11 14 4A 2 15 13 Submit Documentation Feedback 1Y 1Z 2Y 2Z 3Y 3Z 4Y 4Z AM26LS31C, AM26LS31M QUADRUPLE DIFFERENTIAL LINE DRIVER www.ti.com SLLS114I - JANUARY 1979 - REVISED FEBRUARY 2006 SCHEMATIC (EACH DRIVER) Input A V 22 k 9 9 Output Z Output Y Common to All Four Drivers VCC 22 k V 22 k To Three Other Drivers Enable G Enable G GND All resistor values are nominal. Absolute Maximum Ratings (1) over operating free-air temperature range (unless otherwise noted) MIN voltage (2) VCC Supply VI Input voltage Output off-state voltage JA Package thermal impedance (3) Tstg (1) (2) (3) Storage temperature range V 7 V 5.5 V 73 DB package 82 N package 67 NS package 64 J package -65 UNIT 7 D package Lead temperature 1,6 mm (1/16 in) from case for 10 s Lead temperature 1,6 mm (1/16 in) from case for 60 s MAX C/W 260 C 300 C 150 C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. All voltage values, except differential output voltage VOD, are with respect to network GND. The package thermal impedance is calculated in accordance with JESD 51-7. Submit Documentation Feedback 3 AM26LS31C, AM26LS31M QUADRUPLE DIFFERENTIAL LINE DRIVER www.ti.com SLLS114I - JANUARY 1979 - REVISED FEBRUARY 2006 Recommended Operating Conditions MIN NOM MAX AM26LS31C 4.75 5 5.25 AM26LS31M 4.5 5 5.5 UNIT VCC Supply voltage VIH High-level input voltage VIL Low-level input voltage 0.8 V IOH High-level output current -20 mA IOL Low-level output current 20 mA TA Operating free-air temperature 2 V V AM26LS31C 0 70 AM26LS31M -55 125 C Electrical Characteristics (1) over operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS MIN TYP (2) MAX UNIT -1.5 V VIK Input clamp voltage VCC = MIN, II = -18 mA VOH High-level output voltage VCC = MIN, IOH = -20 mA VOL Low-level output voltage VCC = MIN, IOL = 20 mA 0.5 IOZ Off-state (high-impedance-state) output current VCC = MIN, VO = 0.5 V -20 VO = 2.5 V 20 II Input current at maximum input voltage VCC = MAX, VI = 7 V 0.1 IIH High-level input current VCC = MAX, VI = 2.7 V 20 A IIL Low-level input current VCC = MAX, VI = 0.4 V -0.36 mA IOS Short-circuit output current (3) VCC = MAX -150 mA ICC Supply current VCC = MAX, 80 mA (1) (2) (3) 2.5 V -30 All outputs disabled 32 V A mA For C-suffix devices, VCC min = 4.75 V and VCC max = 5.25 V. For M-suffix devices, VCC min = 4.5 V and VCC max = 5.5 V. All typical values are at VCC = 5 V and TA = 25C. Not more than one output should be shorted at a time, and duration of the short circuit should not exceed one second. Switching Characteristics VCC = 5 V (see Figure 1) PARAMETER tPLH Propagation delay time, low- to high-level output tPHL Propagation delay time, high- to low-level output tPZH Output enable time to high level tPZL Output enable time to low level tPHZ Output disable time from high level tPLZ Output disable time from low level tSKEW Output-to-output skew 4 TEST CONDITIONS CL = 30 pF, CL = 30 pF TA = 25C MIN AM26LS31M TYP MAX MIN MAX 14 20 30 14 20 30 RL = 75 25 40 60 RL = 180 37 45 68 21 30 45 23 35 53 1 6 9 S1 and S2 open CL = 10 pF, S1 and S2 closed CL = 30 pF, S1 and S2 open Submit Documentation Feedback UNIT ns ns ns ns AM26LS31C, AM26LS31M QUADRUPLE DIFFERENTIAL LINE DRIVER www.ti.com SLLS114I - JANUARY 1979 - REVISED FEBRUARY 2006 PARAMETER MEASUREMENT INFORMATION Input A (see Notes B and C) Test Point 3V 1.3 V 1.3 V 0V VCC tPLH tPHL 180 VOH 1.5 V Output Y S1 From Output Under Test VOL Skew 75 CL (see Note A) Skew tPLH tPHL S2 VOH 1.5 V Output Z VOL PROPAGATION DELAY TIMES AND SKEW Enable G (see Note D) Enable G TEST CIRCUIT 3V 1.5 V 1.5 V See Note D 0V tPZL tPLZ 4.5 V Waveform 1 (see Note E) S1 Closed S2 Open S1 Closed S2 Closed 1.5 V 1.5 V VOL 0.5 V tPZH tPHZ 0.5 V Waveform 2 (see Note E) S1 Open S2 Closed 1.5 V VOH 1.5 V 0 V S1 Closed S2 Closed ENABLE AND DISABLE TIME WAVEFORMS NOTES: A. B. C. D. E. CL includes probe and jig capacitance. All input pulses are supplied by generators having the following characteristics: PRR 1 MHz, ZO 50 , tr 15 ns, tf 6 ns. When measuring propagation delay times and skew, switches S1 and S2 are open. Each enable is tested separately. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control. Figure 1. Test Circuit and Voltage Waveforms Submit Documentation Feedback 5 AM26LS31C, AM26LS31M QUADRUPLE DIFFERENTIAL LINE DRIVER www.ti.com SLLS114I - JANUARY 1979 - REVISED FEBRUARY 2006 TYPICAL CHARACTERISTICS OUTPUT VOLTAGE vs ENABLE G INPUT VOLTAGE 4 VO - Y Output Voltage - V Load = 470 to GND TA = 25C See Note A 3 4 VCC = 5 V Load = 470 to GND See Note A VCC = 5.25 V VCC = 5 V VO - Y Output Voltage - V OUTPUT VOLTAGE vs ENABLE G INPUT VOLTAGE VCC = 4.75 V 2 1 0 3 TA = 70C TA = 0C TA = 25C 2 1 0 0 1 2 3 0 1 VI - Enable G Input Voltage - V 2 3 VI - Enable G Input Voltage - V Figure 2. Figure 3. OUTPUT VOLTAGE vs ENABLE G INPUT VOLTAGE OUTPUT VOLTAGE vs ENABLE G INPUT VOLTAGE 6 6 VCC = 5.25 V 5 VCC = 5 V VCC = 4.75 V 4 VO - Output Voltage - V VO - Output Voltage - V 5 3 2 1 Load = 470 to VCC TA = 25C See Note B 0 0 1 4 TA = 70C 3 TA = 25C TA = 0C 2 1 VCC = 5 V Load = 470 to VCC See Note B 0 2 3 0 VI - Enable G Input Voltage - V Figure 4. 6 1 2 VI - Enable G Input Voltage - V Figure 5. A. The A input is connected to VCC during testing of the Y outputs and to ground during testing of the Z outputs. B. The A input is connected to ground during testing of the Y outputs and to VCC during testing of the Z outputs. Submit Documentation Feedback 3 AM26LS31C, AM26LS31M QUADRUPLE DIFFERENTIAL LINE DRIVER www.ti.com SLLS114I - JANUARY 1979 - REVISED FEBRUARY 2006 TYPICAL CHARACTERISTICS (continued) HIGH-LEVEL OUTPUT VOLTAGE vs FREE-AIR TEMPERATURE HIGH-LEVEL OUTPUT VOLTAGE vs HIGH-LEVEL OUTPUT CURRENT 5 4 VCC = 5.25 V VOH - High-Level Output Voltage - V VOH - High-Level Output Voltage - V VCC = 5 V See Note A 4 IOH = -20 mA 3 IOH = -40 mA 2 1 VCC = 5 V 3 VCC = 4.75 V 2 1 TA = 25C See Note A 0 0 0 25 50 75 0 -20 TA - Free-Air Temperature - C -40 LOW-LEVEL OUTPUT VOLTAGE vs LOW-LEVEL OUTPUT CURRENT 1 VCC = 5 V IOL = 40 mA See Note B 0.9 VOL- Low-Level Output Voltage - V VOL- Low-Level Output Voltage - V -100 Figure 7. LOW-LEVEL OUTPUT VOLTAGE vs FREE-AIR TEMPERATURE 0.4 -80 IOH - High-Level Output Current - mA Figure 6. 0.5 -60 0.3 0.2 0.1 TA = 25C See Note B 0.8 0.7 0.6 0.5 VCC = 4.75 V 0.4 VCC = 5.25 V 0.3 0.2 0.1 0 0 0 25 50 75 0 TA - Free-Air Temperature - C Figure 8. 20 40 60 80 100 120 IOL - Low-Level Output Current - mA Figure 9. A. The A input is connected to VCC during testing of the Y outputs and to ground during testing of the Z outputs. B. The A input is connected to ground during testing of the Y outputs and to VCC during testing of the Z outputs. Submit Documentation Feedback 7 AM26LS31C, AM26LS31M QUADRUPLE DIFFERENTIAL LINE DRIVER www.ti.com SLLS114I - JANUARY 1979 - REVISED FEBRUARY 2006 TYPICAL CHARACTERISTICS (continued) Y OUTPUT VOLTAGE vs DATA INPUT VOLTAGE 5 4 5 VCC = 5.25 V 4 VCC = 5 V VCC = 4.75 V 3 2 1 TA = 70C TA = 0C 3 TA = 25C 2 1 0 0 0 1 2 3 0 VI - Data Input Voltage - V 1 2 VI - Data Input Voltage - V Figure 10. 8 No Load VO - Y Output Voltage - V VO - Y Output Voltage - V No Load TA = 25C Y OUTPUT VOLTAGE vs DATA INPUT VOLTAGE Figure 11. Submit Documentation Feedback 3 PACKAGE OPTION ADDENDUM www.ti.com 15-Oct-2009 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty 5962-7802301M2A ACTIVE LCCC FK 20 1 TBD 5962-7802301MEA ACTIVE CDIP J 16 1 TBD 5962-7802301MFA ACTIVE CFP W 16 1 AM26LS31CD ACTIVE SOIC D 16 40 AM26LS31CDBR ACTIVE SSOP DB 16 AM26LS31CDBRE4 ACTIVE SSOP DB AM26LS31CDBRG4 ACTIVE SSOP AM26LS31CDE4 ACTIVE AM26LS31CDG4 Lead/Ball Finish MSL Peak Temp (3) POST-PLATE N / A for Pkg Type A42 N / A for Pkg Type TBD A42 N / A for Pkg Type Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM DB 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM AM26LS31CDR ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM AM26LS31CDRE4 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM AM26LS31CDRG4 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM AM26LS31CN ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type AM26LS31CNE4 ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type AM26LS31CNSR ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM AM26LS31CNSRG4 ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM AM26LS31MFKB ACTIVE LCCC FK 20 1 TBD AM26LS31MJB ACTIVE CDIP J 16 1 TBD A42 N / A for Pkg Type AM26LS31MWB ACTIVE CFP W 16 1 TBD A42 N / A for Pkg Type POST-PLATE N / A for Pkg Type (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) Addendum-Page 1 PACKAGE OPTION ADDENDUM www.ti.com 15-Oct-2009 (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 16-Jun-2009 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel Diameter Width (mm) W1 (mm) A0 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant AM26LS31CDBR SSOP DB 16 2000 330.0 16.4 8.2 6.6 2.5 12.0 16.0 Q1 AM26LS31CDR SOIC D 16 2500 330.0 16.4 6.5 10.3 2.1 8.0 16.0 Q1 AM26LS31CDR SOIC D 16 2500 330.0 16.4 6.5 10.3 2.1 8.0 16.0 Q1 AM26LS31CNSR SO NS 16 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 16-Jun-2009 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) AM26LS31CDBR SSOP DB 16 2000 346.0 346.0 33.0 AM26LS31CDR SOIC D 16 2500 346.0 346.0 33.0 AM26LS31CDR SOIC D 16 2500 333.2 345.9 28.6 AM26LS31CNSR SO NS 16 2000 346.0 346.0 33.0 Pack Materials-Page 2 MECHANICAL DATA MSSO002E - JANUARY 1995 - REVISED DECEMBER 2001 DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE 28 PINS SHOWN 0,38 0,22 0,65 28 0,15 M 15 0,25 0,09 8,20 7,40 5,60 5,00 Gage Plane 1 14 0,25 A 0-8 0,95 0,55 Seating Plane 2,00 MAX 0,10 0,05 MIN PINS ** 14 16 20 24 28 30 38 A MAX 6,50 6,50 7,50 8,50 10,50 10,50 12,90 A MIN 5,90 5,90 6,90 7,90 9,90 9,90 12,30 DIM 4040065 /E 12/01 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion not to exceed 0,15. Falls within JEDEC MO-150 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 MECHANICAL DATA MLCC006B - OCTOBER 1996 FK (S-CQCC-N**) LEADLESS CERAMIC CHIP CARRIER 28 TERMINAL SHOWN 18 17 16 15 14 13 NO. OF TERMINALS ** 12 19 11 20 10 A B MIN MAX MIN MAX 20 0.342 (8,69) 0.358 (9,09) 0.307 (7,80) 0.358 (9,09) 28 0.442 (11,23) 0.458 (11,63) 0.406 (10,31) 0.458 (11,63) 21 9 22 8 44 0.640 (16,26) 0.660 (16,76) 0.495 (12,58) 0.560 (14,22) 23 7 52 0.739 (18,78) 0.761 (19,32) 0.495 (12,58) 0.560 (14,22) 24 6 68 0.938 (23,83) 0.962 (24,43) 0.850 (21,6) 0.858 (21,8) 84 1.141 (28,99) 1.165 (29,59) 1.047 (26,6) 1.063 (27,0) B SQ A SQ 25 5 26 27 28 1 2 3 4 0.080 (2,03) 0.064 (1,63) 0.020 (0,51) 0.010 (0,25) 0.020 (0,51) 0.010 (0,25) 0.055 (1,40) 0.045 (1,14) 0.045 (1,14) 0.035 (0,89) 0.045 (1,14) 0.035 (0,89) 0.028 (0,71) 0.022 (0,54) 0.050 (1,27) 4040140 / D 10/96 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. This package can be hermetically sealed with a metal lid. The terminals are gold plated. Falls within JEDEC MS-004 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Amplifiers Data Converters DLP(R) Products DSP Clocks and Timers Interface Logic Power Mgmt Microcontrollers RFID RF/IF and ZigBee(R) Solutions amplifier.ti.com dataconverter.ti.com www.dlp.com dsp.ti.com www.ti.com/clocks interface.ti.com logic.ti.com power.ti.com microcontroller.ti.com www.ti-rfid.com www.ti.com/lprf Applications Audio Automotive Broadband Digital Control Medical Military Optical Networking Security Telephony Video & Imaging Wireless www.ti.com/audio www.ti.com/automotive www.ti.com/broadband www.ti.com/digitalcontrol www.ti.com/medical www.ti.com/military www.ti.com/opticalnetwork www.ti.com/security www.ti.com/telephony www.ti.com/video www.ti.com/wireless Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2009, Texas Instruments Incorporated