June 2009 Doc ID 11491 Rev 3 1/11
11
ST13009
High voltage fast-switching
NPN power transistor
Features
■Low spread of dynamic parameters
■High voltage capability
■Minimum lot-to-lot spread for reliable operation
■Very high switching speed
Applications
■Switch mode power supplies
Description
The device is manufactured using high voltage
multi-epitaxial planar technology for high
switching speeds and high voltage capability. It
uses a hollow emitter structure to enhance
switching speeds.
Figure 1. Internal schematic diagram
TO-220
123
Table 1. Device summary
Order code Marking (1) Package Packaging
ST13009 13009 L
13009 H TO-220 Tube
1. Product is pre-selected in DC current gain (group L and group H). STMicroelectronics reserves the right to ship either
groups according to production availability. Please contact your nearest STMicroelectronics sales office for delivery details.
www.st.com
Contents ST13009
2/11 Doc ID 11491 Rev 3
Contents
1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3 Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
ST13009 Electrical ratings
Doc ID 11491 Rev 3 3/11
1 Electrical ratings
Table 2. Absolute maximum ratings
Symbol Parameter Value Unit
VCEV Collector-emitter voltage (VBE = -1.5 V) 700 V
VCEO Collector-emitter voltage (IB = 0) 400 V
VEBO Emitter-base voltage (IC = 0) 12 V
ICCollector current 12 A
ICM Collector peak current (tP < 5ms) 24 A
IBBase current 6 A
IBM Base peak current (tP < 5ms) 12 A
Ptot Total dissipation at Tc = 25°C 100 W
Tstg Storage temperature -65 to 150 °C
TJMax. operating junction temperature 150 °C
Table 3. Thermal data
Symbol Parameter Value Unit
Rthj-case Thermal resistance junction-case ____M __mMax 1.25 °C/W
Electrical characteristics ST13009
4/11 Doc ID 11491 Rev 3
2 Electrical characteristics
(Tcase = 25°C unless otherwise specified)
Table 4. Electrical characteristics
Symbol Parameter Test conditions Min. Typ. Max. Unit
ICEV
Collector cut-off current
(VBE = -1.5 V)
VCE = 700 V
VCE = 700 V TC = 100°C
10
500
µA
µA
IEBO
Emitter cut-off current
(IC = 0) VEB = 10 V 10 µA
VCEO(sus) (1)
1. Pulsed duration = 300 µs, duty cycle ≤ 2 %
Collector-emitter
sustaining voltage
(IB = 0)
IC = 10 mA 400 V
VCE(sat) (1) Collector-emitter
saturation voltage
IC = 4 A _ IB = 0.8 A
IC = 5 A _ _ IB = 1 A
IC = 8 A _ _ IB = 1.6 A
IC = 12 A _ _ IB = 3 A
0.85
0.9
1.25
2.5
V
V
V
V
VBE(sat) (1) Base-emitter saturation
voltage
IC = 5 A _ IB = 1 A
IC = 8 A _ _ IB = 1.6 A
1.2
1.6
V
V
hFE (1)(2)
2. Product is pre-selected in DC current gain (group L and group H). STMicroelectronics reserves the right to
ship either groups according to production availability. Please contact your nearest STMicroelectronics
sales office for delivery details.
DC current gain
IC = 5 A _ VCE = 5 V
Group L
Group H
IC = 8 A _ _ VCE = 5 V
15
26
10
31
39
30
ts
tf
Inductive load
Storage time
Fall time
IC = 5 A VCC = 250 V
IB1 = 1 A IB2 = -2 A
L = 200 µH
see Figure 9
1.6
60
2.5
110
µs
ns
ts
tf
Inductive load
Storage time
Fall time
IC = 5 A VCC = 125 V
IB1 = - IB2 = 1.6 A
L = 200 µH tc = 125 °C
see Figure 9
2.3
110
µs
ns
ST13009 Electrical characteristics
Doc ID 11491 Rev 3 5/11
2.1 Electrical characteristics (curves)
Figure 2. Safe operating area Figure 3. Derating curve
Figure 4. DC current gain Figure 5. DC current gain
Figure 6. Collector-emitter saturation
voltage
Figure 7. Base-emitter saturation
voltage
Electrical characteristics ST13009
6/11 Doc ID 11491 Rev 3
Figure 8. Reverse biased operating
area
ST13009 Test circuit
Doc ID 11491 Rev 3 7/11
3 Test circuit
Figure 9. Inductive load switching
1) Fast electronic switch
2) Non-inductive resistor
3) Fast recovery rectifier
Package mechanical data ST13009
8/11 Doc ID 11491 Rev 3
4 Package mechanical data
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK is an ST trademark.
ST13009 Package mechanical data
Doc ID 11491 Rev 3 9/11
TO-220 mechanical data
Dim mm inch
Min Typ Max Min Typ Max
A 4.40 4.60 0.1730.181
b0.61 0.88 0.024 0.034
b1 1.14 1.70 0.044 0.066
c0.480.70 0.0190.027
D 15.25 15.75 0.6 0.62
D1 1.27 0.050
E 10 10.40 0.393 0.409
e 2.40 2.70 0.094 0.106
e1 4.95 5.15 0.194 0.202
F1.231.32 0.0480.051
H1 6.20 6.60 0.244 0.256
J1 2.40 2.72 0.094 0.107
L1314 0.511 0.551
L1 3.50 3.93 0.137 0.154
L20 16.40 0.645
L3028.90 1.137
∅P3.75 3.85 0.147 0.151
Q2.65 2.95 0.104 0.116
ST13009
Doc ID 11491 Rev 3 11/11
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2009 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
