PIC32TM Industrial Host StackableUSBTM Microcontroller USB1032 Features The USB1032 is the ideal module for applications requiring more performance than typical micro-controllers have offered but not needing the full blast offered by an SBC. Wellsuited for applications confined to small, tight spaces, the 125 DMIPS performance requires only 100mA power, considerably less than an SBC. The USB1032 is powered by the PIC32 microcontroller whose USB 2.0 On-The-Go (OTG) functionality allows the microcontroller to be used as a Host. Operating as a Host device, design engineers can easily and cost-effectively stack StackableUSB client I/O devices onto the controller making a small, embedded controller ideally suited to harsh environments. Software/Driver Support Windows XP, Vista MPLAB IDE MPLAB C32 C Compiler USB Host stack Graphics & audio library 16- and 32-bit File System TCP/IP Stack Sample software 9 80MHz system clock 9 1.56 DMIPS/MHz performance 9 512KB Flash, 32KB SRAM memory 9 Single-cycle multiply and highperformance divide unit 9 On-board RS232 transceiver 9 Easy development with Microchip's MPLAB IDE 9 Small 1.85" x 1.74" board 9 -40 to +85C operation Available onboard is a host of control features including 10-bit ADC, RS232, four (4) programmable LEDs, and digital I/O. Developers will appreciate the PIC32's easy-to-use and solidly-supported software tools as they program and debug. The 1.85" x 1.74" module is USB 2.0 compliant providing users the advantages of plug-and-play interfacing. The module stacks onto the top or bottom of any StackableUSB client single board computer or microcontroller forming a small, rugged, embeddable system, ideal for harsh environments. The USB1032 can be connected to desktop PCs and laptops via ICSP for development. Compatible Hardware StackableUSB Client devices ICE ICD3 Mounting/Packaging 1/4-Size 104TM Form Factor Standoffs, STDOFFUSB Mixed I/O PIC32 256K SPI EEPROM ICSP 4 User LEDs StackableUSB Mixed I/O Battery Backed RTC Power Input Dual RS232 Reset Header Specifications: Mechanical: 1.85" x 1.74" StackableUSB 1/4-Size 104TM Form Factor Power Requirements: +5v 5% at 100mA typical Environmental: -40 to +85C operating -40 to +85C storage 5%-95% relative humidity, non-condensing Processor: MIPS32(R) M4KTM 32-bit core 80MHz, 1.56DMIPS/MHz 5-stage pipeline, 32-bit ALU Single-cycle multiply and highperformance divide unit User and kernel modes to enable robust embedded system Prefetch cache module to speed execution from flash 512KB Flash, 32KB SRAM Serial Ports: Two (2) RS232 available from 20-pin header LEDs/Switches: Four (4) programmable user LEDs One (1) reset header Peripheral Features: 4-channel hardware DMA controller with automatic data size detection USB 2.0 compliant full speed controller USB has a dedicated DMA channel Two (2) I2C modules Two (2) UART modules with: * RS232, RS485 and LIN 1.2 support * IrDA(R) with on-chip hardware encoder and decoder Parallel master and slave port Hardware real-time clock/calendar Five (5) 16-bit timers/counters (two 16-bit pairs combine to create two 32-bit timers) Five (5) capture inputs Five (5) vompare/PWM outputs Five (5) external interrupt pins High-speed I/O pins capable of toggling at up to 80MHz High-current sink/source (18 mA/18 mA) on all I/O pins Configurable open-drain output on digital I/O pins Analog Features: 16-channel 10-bit analog-to-digital converter 500 KSPS conversion rate Conversion available during sleep, idle Two (2) analog comparators 5.5V tolerant input pins (digital pins only) Debug Features: 2-wire ICSP interface with unobtrusive access and real-time data exchange with application External Connections: 2-pin power terminal StackableUSB 20-pin header for COM1 and COM2 6-pin ICSP debug port 2x40-pin headers for I/O and peripherals Internal Electrical Interface: StackableUSB USB 1.1 & 2.0 compatible, full-speed Development Kit: Module Complete cable set Documentation, sample software Ordering Information: OEM Single Board Computers: USB1032 PIC32 Industrial Host Microcontroller CS1032 Complete cable set 1032OPT1 Battery Backed RTC 1032OPT2 256K SPI EEPROM Related Products: STDOFFUSB StackableUSB standoff kit BA4040 40-pin mixed I/O header breakout cable BA2018 20-pin RS232 header to dual DB9 breakout cable CA4142 ICSP programming/ debugging cable Development Board Kits* DK1032 . PIC32 Industrial Host Microcontroller; Windowsready development kit *See Development Kit Specifications