Sample & Buy Product Folder Support & Community Tools & Software Technical Documents LM94022, LM94022-Q1 SNIS140F - MAY 2006 - REVISED SEPTEMBER 2015 LM94022/-Q1 1.5-V, SC70, Multi-Gain Analog Temperature Sensor With Class-AB Output 1 Features 3 Description * The LM94022/-Q1 device is a precision analog output CMOS integrated-circuit temperature sensor with selectable linear negative temperature coefficient (NTC). A class-AB output structure gives the LM94022/-Q1 strong output source and sink current capability for driving heavy transient loads such as that presented by the input of a sample-and-hold analog-to-digital converter. The low 5.4-A supply current and 1.5-V operating voltage of the LM94022/Q1 make it ideal for battery-powered systems as well as general temperature-sensing applications. 1 * * * * * * * * LM94022/-Q1 is AEC-Q100 Grade 0 qualified and is Manufactured on an Automotive Grade Flow Low 1.5-V to 5.5-V Operation With Low 5.4-A Supply Current Push-Pull Output With 50-A Source Current Capability Four Selectable Gains Very Accurate Over Wide Temperature Range of -50C to +150C: - 1.5C Temperature Accuracy for 20C to 40C Range - 1.8C Temperature Accuracy for -50C to 70C Range - 2.1C Temperature Accuracy for -50C to 90C Range - 2.7C Temperature Accuracy for -50C to 150C Range Output is Short-Circuit Protected Extremely Small SC70 Package For the Similar Functionality in a TO-92 Package, See LMT84, LMT85, LMT86, or LMT87 Footprint Compatible With the Industry-Standard LM20 Temperature Sensor 2 Applications * * * * * * * The Gain Select 1 (GS1) and Gain Select 0 (GS0) logic inputs select one of four gains for the temperature-to-voltage output transfer function: -5.5 mV/C, -8.2 mV/C, -10.9 mV/C, and -13.6 mV/C. Selecting -5.5 mV/C (GS1 and GS0 both tied low), allows the LM94022/-Q1 to operate down to 1.5-V supply while measuring temperature over the full range of -50C to +150C. Maximum temperature sensitivity, -13.6 mV/C, is selected when GS1 and GS0 are both tied high. The gain-select inputs can be tied directly to VDD or Ground without any pullup or pulldown resistors, reducing component count and board area. These inputs can also be driven by logic signals allowing the system to optimize the gain during operation or system diagnostics. Device Information(1) PART NUMBER LM94022 Automotive Cell Phones Wireless Transceivers Battery Management Disk Drives Games Appliances LM94022-Q1 PACKAGE SC70 (5) BODY SIZE (NOM) 2.00 mm x 1.25 mm (1) For all available packages, see the orderable addendum at the end of the data sheet. Full-Range Celsius Temperature Sensor (-50C to +150C) Operating from a Single Cell Battery Output Temperature Characteristic VDD (+1.5V to +5.5V) VDD Single Battery Cell LM94022 GS1 OUT GS0 GND 1 An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. PRODUCTION DATA. LM94022, LM94022-Q1 SNIS140F - MAY 2006 - REVISED SEPTEMBER 2015 www.ti.com Table of Contents 1 2 3 4 5 6 7 Features .................................................................. Applications ........................................................... Description ............................................................. Revision History..................................................... Pin Configuration and Functions ......................... Specifications......................................................... 1 1 1 2 3 4 6.1 6.2 6.3 6.4 6.5 6.6 4 4 4 4 5 7 Absolute Maximum Ratings ...................................... ESD Ratings.............................................................. Recommended Operating Conditions....................... Thermal Information .................................................. Electrical Characteristics .......................................... Typical Characteristics .............................................. Detailed Description .............................................. 9 7.1 7.2 7.3 7.4 Overview ................................................................... 9 Functional Block Diagram ......................................... 9 Feature Description................................................... 9 Device Functional Modes........................................ 14 8 Application and Implementation ........................ 16 8.1 Application Information............................................ 16 8.2 Typical Application ................................................. 17 8.3 System Examples ................................................... 18 9 Power Supply Recommendations...................... 19 10 Layout................................................................... 19 10.1 Layout Guidelines ................................................. 19 10.2 Layout Example .................................................... 20 10.3 Output and Noise Considerations ......................... 20 11 Device and Documentation Support ................. 21 11.1 11.2 11.3 11.4 11.5 Related Links ........................................................ Community Resources.......................................... Trademarks ........................................................... Electrostatic Discharge Caution ............................ Glossary ................................................................ 21 21 21 21 21 12 Mechanical, Packaging, and Orderable Information ........................................................... 21 4 Revision History NOTE: Page numbers for previous revisions may differ from page numbers in the current version. Changes from Revision E (June 2013) to Revision F * Page Added or changed: Pin Configuration and Functions section, ESD Ratings table, Feature Description section, Device Functional Modes, Application and Implementation section, Power Supply Recommendations section, Layout section, Device and Documentation Support section, and Mechanical, Packaging, and Orderable Information section ................................................................................................................................................................................... 1 Changes from Revision D (February 2013) to Revision E * Page added parabolic equation for LM94022/-Q1 .......................................................................................................................... 1 Changes from Revision C (May 2005) to Revision D * 2 Page Changed layout of National Data Sheet to TI format ........................................................................................................... 17 Submit Documentation Feedback Copyright (c) 2006-2015, Texas Instruments Incorporated Product Folder Links: LM94022 LM94022-Q1 LM94022, LM94022-Q1 www.ti.com SNIS140F - MAY 2006 - REVISED SEPTEMBER 2015 5 Pin Configuration and Functions DCK Package 5-Pin SC70 Top View 1 5 GS0 GS1 2 LM94022 GND 3 4 OUT VDD Pin Functions PIN NAME NO. TYPE EQUIVALENT CIRCUIT FUNCTION VDD GS1 5 Gain Select 1 - One of two logic inputs for selecting the slope of the output response Logic Input ESD CLAMP GND GS0 1 Gain Select 0 - One of two logic inputs for selecting the slope of the output response Logic Input VDD Outputs a voltage which is inversely proportional to temperature OUT 3 Analog Output VDD 4 Power -- Positive Supply Voltage GND 2 Ground -- Power Supply Ground GND Copyright (c) 2006-2015, Texas Instruments Incorporated Product Folder Links: LM94022 LM94022-Q1 Submit Documentation Feedback 3 LM94022, LM94022-Q1 SNIS140F - MAY 2006 - REVISED SEPTEMBER 2015 www.ti.com 6 Specifications 6.1 Absolute Maximum Ratings over operating free-air temperature range (unless otherwise noted) (1) (2) MIN MAX UNIT Supply Voltage -0.3 6 V Voltage at Output Pin -0.3 (VDD + 0.5) V 7 mA 6 V Output Current -0.3 Voltage at GS0 and GS1 Input Pins Input Current at any pin (3) Maximum Junction Temperature, TJMAX -65 Storage temperature, Tstg (1) (2) (3) 5 mA 150 C 150 C Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. Soldering process must comply with Reflow Temperature Profile specifications. Refer to http://www.ti.com/packaging When the input voltage (VI) at any pin exceeds power supplies (VI < GND or VI > V+), the current at that pin should be limited to 5 mA. 6.2 ESD Ratings VALUE V(ESD) (1) (2) Human body model (HBM) Electrostatic discharge (1) (2) 2500 Machine model (2) 250 UNIT V JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process. The human body model is a 100-pF capacitor discharged through a 1.5-k resistor into each pin. The machine model is a 200-pF capacitor discharged directly into each pin. 6.3 Recommended Operating Conditions over operating free-air temperature range (unless otherwise noted) (1) Free Air or Specified Temperature (TMIN TA TMAX) Supply Voltage (VDD) (1) MIN MAX UNIT -50 150 C 1.5 5.5 V Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. The guaranteed specifications apply only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test conditions. 6.4 Thermal Information LM94022, LM94022-Q1 THERMAL METRIC (1) DCK (SC70) UNIT 5 PINS RJA (1) 4 Junction-to-ambient thermal resistance 415 C/W For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application report, SPRA953. Submit Documentation Feedback Copyright (c) 2006-2015, Texas Instruments Incorporated Product Folder Links: LM94022 LM94022-Q1 LM94022, LM94022-Q1 www.ti.com SNIS140F - MAY 2006 - REVISED SEPTEMBER 2015 6.5 Electrical Characteristics Unless otherwise noted, these specifications apply for VDD = 1.5 V to 5.5 V; all limits TA = TJ = 25C unless otherwise specified. These limits do not include DC load regulation. These stated accuracy limits are with reference to the values in the Table 2. PARAMETER CONDITIONS MIN TYP (1) MAX (2) UNIT ACCURACY CHARACTERISTICS GS1 = 0 GS0 = 0 GS1 = 0 GS0 = 1 Temperature Error (3) GS1 = 1 GS0 = 0 GS1 = 1 GS0 = 1 (1) (2) (3) TA = +20C to +40C; VDD = 1.5 V to 5.5 V -1.5 1.5 TA = +0C to +70C; VDD = 1.5 V to 5.5 V -1.8 1.8 TA = +0C to +90C; VDD = 1.5 V to 5.5 V -2.1 2.1 TA = +0C to +120C; VDD = 1.5 V to 5.5 V -2.4 2.4 TA = +0C to +150C; VDD = 1.5 V to 5.5 V -2.7 2.7 TA = -50C to +0C; VDD = 1.6 V to 5.5 V -1.8 1.8 TA = +20C to +40C; VDD = 1.8 V to 5.5 V -1.5 1.5 TA = +0C to +70C; VDD = 1.9 V to 5.5 V -1.8 1.8 TA = +0C to +90C; VDD = 1.9 V to 5.5 V -2.1 2.1 TA = +0C to +120C; VDD = 1.9 V to 5.5 V -2.4 2.4 TA = +0C to +150C; VDD = 1.9 V to 5.5 V -2.7 2.7 TA = -50C to +0C; VDD = 2.3 V to 5.5 V -1.8 1.8 TA = +20C to +40C; VDD = 2.2 V to 5.5 V -1.5 1.5 TA = +0C to +70C; VDD = 2.4 V to 5.5 V -1.8 1.8 TA = +0C to +90C; VDD = 2.4 V to 5.5 V -2.1 2.1 TA = +0C to +120C; VDD = 2.4 V to 5.5 V -2.4 2.4 TA = +0C to +150C; VDD = 2.4 V to 5.5 V -2.7 2.7 TA = -50C to +0C; VDD = 3.0 V to 5.5 V -1.8 1.8 TA = +20C to +40C; VDD = 2.7 V to 5.5 V -1.5 1.5 TA = +0C to +70C; VDD = 3.0 V to 5.5 V -1.8 1.8 TA = +0C to +90C; VDD = 3.0 V to 5.5 V -2.1 2.1 TA = +0C to +120C; VDD = 3.0 V to 5.5 V -2.4 2.4 TA = 0C to +150C; VDD = 3.0 V to 5.5 V -2.7 2.7 TA = -50C to +0C; VDD = 3.6 V to 5.5 V -1.8 1.8 C C C C C C C C C C C C C C C C C C C C C C C C Typicals are at TJ = TA = 25C and represent most likely parametric norm. Limits are warrantied to TI's AOQL (Average Outgoing Quality Level). Accuracy is defined as the error between the measured and reference output voltages, tabulated in the Transfer Table at the specified conditions of supply gain setting, voltage, and temperature (expressed in C). Accuracy limits include line regulation within the specified conditions. Accuracy limits do not include load regulation; they assume no DC load. Copyright (c) 2006-2015, Texas Instruments Incorporated Product Folder Links: LM94022 LM94022-Q1 Submit Documentation Feedback 5 LM94022, LM94022-Q1 SNIS140F - MAY 2006 - REVISED SEPTEMBER 2015 www.ti.com Electrical Characteristics (continued) Unless otherwise noted, these specifications apply for VDD = 1.5 V to 5.5 V; all limits TA = TJ = 25C unless otherwise specified. These limits do not include DC load regulation. These stated accuracy limits are with reference to the values in the Table 2. PARAMETER Sensor Gain Load Regulation (4) CONDITIONS MIN mV/C GS1 = 0, GS0 = 1 -8.2 mV/C GS1 = 1, GS0 = 0 -10.9 mV/C GS1 = 1, GS0 = 1 -13.6 mV/C Source 50 A, (VDD - VOUT) 200 mV -0.22 TA = TJ = TMIN to TMAX Sink 50 A, VOUT 200 mV TA = TJ = TMIN to TMAX -1 0.26 1 Supply Current 5.4 TA = TJ = TMIN to TMAX 9 1100 CL= 0 pF to 1100 pF VIH GS1 and GS0 Input Logic 1 Threshold Voltage TA = TJ = TMIN to TMAX VIL GS1 and GS0 Input Logic 0 Threshold Voltage TA = TJ = TMIN to TMAX IIH Logic 1 Input Current (7) IIL Logic 0 Input Current (7) 6 8.1 Output Load Capacitance Power-ON Time (6) (6) (7) 5.4 TA = TJ = +30C to +150C 1.9 VDD - 0.5 A A ms V 0.5 0.001 TA = TJ = TMIN to TMAX 1 0.001 TA = TJ = TMIN to TMAX mV pF 0.7 TA = TJ = TMIN to TMAX mV V/V 200 (VDD - VOUT) 100 mV (4) (5) UNIT -5.5 (VDD - VOUT) 100 mV CL MAX (2) GS1 = 0, GS0 = 0 Line Regulation (5) IS TYP (1) 1 V A A Source currents are flowing out of the LM94022/-Q1. Sink currents are flowing into the LM94022/-Q1. Line regulation (DC) is calculated by subtracting the output voltage at the highest supply voltage from the output voltage at the lowest supply voltage. The typical DC line regulation specification does not include the output voltage shift discussed in Output Voltage Shift. Warrantied by design and characterization. The input current is leakage only and is highest at high temperature. It is typically only 0.001 A. The 1-A limit is solely based on a testing limitation and does not reflect the actual performance of the part. Submit Documentation Feedback Copyright (c) 2006-2015, Texas Instruments Incorporated Product Folder Links: LM94022 LM94022-Q1 LM94022, LM94022-Q1 www.ti.com SNIS140F - MAY 2006 - REVISED SEPTEMBER 2015 6.6 Typical Characteristics 4 MAX Limit TEMPERATURE ERROR (C) 3 2 1 0 MIN Limit -1 -2 -3 -4 -50 -25 0 25 50 75 100 125 150 TEMPERATURE (C) Figure 1. Temperature Error vs. Temperature Figure 2. Minimum Operating Temperature vs. Supply Voltage Figure 3. Supply Current vs. Temperature Figure 4. Supply Current vs. Supply Voltage Figure 5. Load Regulation, Sourcing Current Figure 6. Load Regulation, Sinking Current Copyright (c) 2006-2015, Texas Instruments Incorporated Product Folder Links: LM94022 LM94022-Q1 Submit Documentation Feedback 7 LM94022, LM94022-Q1 SNIS140F - MAY 2006 - REVISED SEPTEMBER 2015 www.ti.com Typical Characteristics (continued) 8 Figure 7. Change in Vout vs. Overhead Voltage Figure 8. Supply-Noise Gain vs. Frequency Figure 9. Output Voltage vs. Supply Voltage Gain Select = 00 Figure 10. Output Voltage vs. Supply Voltage Gain Select = 01 Figure 11. Output Voltage vs. Supply Voltage Gain Select = 10 Figure 12. Output Voltage vs. Supply Voltage Gain Select = 11 Submit Documentation Feedback Copyright (c) 2006-2015, Texas Instruments Incorporated Product Folder Links: LM94022 LM94022-Q1 LM94022, LM94022-Q1 www.ti.com SNIS140F - MAY 2006 - REVISED SEPTEMBER 2015 7 Detailed Description 7.1 Overview The LM94022/-Q1 is an analog output temperature sensor with a selectable negative temperature coefficient output (NTC). The temperature-sensing element is comprised of stacked transistor base emitter junctions (thermal diodes) that are forward biased by a current source. The number of stacked thermal diodes determines the output gain or slope. The gain select pins (GS1 and GS0) are simple logic inputs that control the number of stacked thermal diodes thus selecting the output gain as shown in the Table 1 table. The temperature sensing element is buffered by a simple amplifier that drives the output pin. The simple class AB output stage of the amplifier can source or sink current and provides low-impedance, high-current drive. Table 1. Gain Select Pin Function GS1 LOGIC LEVEL GS0 LOGIC LEVEL SELECTED AVERAGE GAIN 0 0 -5.5 mV/C 0 1 -8.2 mV/C 1 0 -10.9 mV/C 1 1 -13.6 mV/C 7.2 Functional Block Diagram VDD LM94022 OUT Thermal Diodes GS1 Gain Select Logic GS0 GND 7.3 Feature Description 7.3.1 LM94022/-Q1 Transfer Function Gain Selection The LM94022/-Q1 has four selectable gains, each of which can be selected by the GS1 and GS0 input pins. The output voltage for each gain, across the complete operating temperature range is shown in Table 2. This table is the reference from which the LM94022/-Q1 accuracy specifications (listed in the Electrical Characteristics section) are determined. This table can be used, for example, in a host processor look-up table. A file containing this data is available for download at LM94022 product folder under Tools and Software. Copyright (c) 2006-2015, Texas Instruments Incorporated Product Folder Links: LM94022 LM94022-Q1 Submit Documentation Feedback 9 LM94022, LM94022-Q1 SNIS140F - MAY 2006 - REVISED SEPTEMBER 2015 www.ti.com Table 2. LM94022/LM94022-Q1 Transfer Table 10 TEMPERATURE (C) GS = 00 (mV) GS = 01 (mV) GS = 10 (mV) GS = 11 (mV) -50 1299 1955 2616 3277 -49 1294 1949 2607 3266 -48 1289 1942 2598 3254 -47 1284 1935 2589 3243 -46 1278 1928 2580 3232 -45 1273 1921 2571 3221 -44 1268 1915 2562 3210 -43 1263 1908 2553 3199 -42 1257 1900 2543 3186 -41 1252 1892 2533 3173 -40 1247 1885 2522 3160 -39 1242 1877 2512 3147 -38 1236 1869 2501 3134 -37 1231 1861 2491 3121 -36 1226 1853 2481 3108 -35 1221 1845 2470 3095 -34 1215 1838 2460 3082 -33 1210 1830 2449 3069 -32 1205 1822 2439 3056 -31 1200 1814 2429 3043 -30 1194 1806 2418 3030 -29 1189 1798 2408 3017 -28 1184 1790 2397 3004 -27 1178 1783 2387 2991 -26 1173 1775 2376 2978 -25 1168 1767 2366 2965 -24 1162 1759 2355 2952 -23 1157 1751 2345 2938 -22 1152 1743 2334 2925 -21 1146 1735 2324 2912 -20 1141 1727 2313 2899 -19 1136 1719 2302 2886 -18 1130 1711 2292 2873 -17 1125 1703 2281 2859 -16 1120 1695 2271 2846 -15 1114 1687 2260 2833 -14 1109 1679 2250 2820 -13 1104 1671 2239 2807 -12 1098 1663 2228 2793 -11 1093 1656 2218 2780 -10 1088 1648 2207 2767 -9 1082 1639 2197 2754 -8 1077 1631 2186 2740 -7 1072 1623 2175 2727 -6 1066 1615 2164 2714 -5 1061 1607 2154 2700 -4 1055 1599 2143 2687 Submit Documentation Feedback Copyright (c) 2006-2015, Texas Instruments Incorporated Product Folder Links: LM94022 LM94022-Q1 LM94022, LM94022-Q1 www.ti.com SNIS140F - MAY 2006 - REVISED SEPTEMBER 2015 Table 2. LM94022/LM94022-Q1 Transfer Table (continued) TEMPERATURE (C) GS = 00 (mV) GS = 01 (mV) GS = 10 (mV) GS = 11 (mV) -3 1050 1591 2132 2674 -2 1044 1583 2122 2660 -1 1039 1575 2111 2647 0 1034 1567 2100 2633 1 1028 1559 2089 2620 2 1023 1551 2079 2607 3 1017 1543 2068 2593 4 1012 1535 2057 2580 5 1007 1527 2047 2567 6 1001 1519 2036 2553 7 996 1511 2025 2540 8 990 1502 2014 2527 9 985 1494 2004 2513 10 980 1486 1993 2500 11 974 1478 1982 2486 12 969 1470 1971 2473 13 963 1462 1961 2459 14 958 1454 1950 2446 15 952 1446 1939 2433 16 947 1438 1928 2419 17 941 1430 1918 2406 18 936 1421 1907 2392 19 931 1413 1896 2379 20 925 1405 1885 2365 21 920 1397 1874 2352 22 914 1389 1864 2338 23 909 1381 1853 2325 24 903 1373 1842 2311 25 898 1365 1831 2298 26 892 1356 1820 2285 27 887 1348 1810 2271 28 882 1340 1799 2258 29 876 1332 1788 2244 30 871 1324 1777 2231 31 865 1316 1766 2217 32 860 1308 1756 2204 33 854 1299 1745 2190 34 849 1291 1734 2176 35 843 1283 1723 2163 36 838 1275 1712 2149 37 832 1267 1701 2136 38 827 1258 1690 2122 39 821 1250 1679 2108 40 816 1242 1668 2095 41 810 1234 1657 2081 42 804 1225 1646 2067 43 799 1217 1635 2054 Copyright (c) 2006-2015, Texas Instruments Incorporated Product Folder Links: LM94022 LM94022-Q1 Submit Documentation Feedback 11 LM94022, LM94022-Q1 SNIS140F - MAY 2006 - REVISED SEPTEMBER 2015 www.ti.com Table 2. LM94022/LM94022-Q1 Transfer Table (continued) 12 TEMPERATURE (C) GS = 00 (mV) GS = 01 (mV) GS = 10 (mV) GS = 11 (mV) 44 793 1209 1624 2040 45 788 1201 1613 2026 46 782 1192 1602 2012 47 777 1184 1591 1999 48 771 1176 1580 1985 49 766 1167 1569 1971 50 760 1159 1558 1958 51 754 1151 1547 1944 52 749 1143 1536 1930 53 743 1134 1525 1916 54 738 1126 1514 1902 55 732 1118 1503 1888 56 726 1109 1492 1875 57 721 1101 1481 1861 58 715 1093 1470 1847 59 710 1084 1459 1833 60 704 1076 1448 1819 61 698 1067 1436 1805 62 693 1059 1425 1791 63 687 1051 1414 1777 64 681 1042 1403 1763 65 676 1034 1391 1749 66 670 1025 1380 1735 67 664 1017 1369 1721 68 659 1008 1358 1707 69 653 1000 1346 1693 70 647 991 1335 1679 71 642 983 1324 1665 72 636 974 1313 1651 73 630 966 1301 1637 74 625 957 1290 1623 75 619 949 1279 1609 76 613 941 1268 1595 77 608 932 1257 1581 78 602 924 1245 1567 79 596 915 1234 1553 80 591 907 1223 1539 81 585 898 1212 1525 82 579 890 1201 1511 83 574 881 1189 1497 84 568 873 1178 1483 85 562 865 1167 1469 86 557 856 1155 1455 87 551 848 1144 1441 88 545 839 1133 1427 89 539 831 1122 1413 90 534 822 1110 1399 Submit Documentation Feedback Copyright (c) 2006-2015, Texas Instruments Incorporated Product Folder Links: LM94022 LM94022-Q1 LM94022, LM94022-Q1 www.ti.com SNIS140F - MAY 2006 - REVISED SEPTEMBER 2015 Table 2. LM94022/LM94022-Q1 Transfer Table (continued) TEMPERATURE (C) GS = 00 (mV) GS = 01 (mV) GS = 10 (mV) GS = 11 (mV) 91 528 814 1099 1385 92 522 805 1088 1371 93 517 797 1076 1356 94 511 788 1065 1342 95 505 779 1054 1328 96 499 771 1042 1314 97 494 762 1031 1300 98 488 754 1020 1286 99 482 745 1008 1272 100 476 737 997 1257 101 471 728 986 1243 102 465 720 974 1229 103 459 711 963 1215 104 453 702 951 1201 105 448 694 940 1186 106 442 685 929 1172 107 436 677 917 1158 108 430 668 906 1144 109 425 660 895 1130 110 419 651 883 1115 111 413 642 872 1101 112 407 634 860 1087 113 401 625 849 1073 114 396 617 837 1058 115 390 608 826 1044 116 384 599 814 1030 117 378 591 803 1015 118 372 582 791 1001 119 367 573 780 987 120 361 565 769 973 121 355 556 757 958 122 349 547 745 944 123 343 539 734 929 124 337 530 722 915 125 332 521 711 901 126 326 513 699 886 127 320 504 688 872 128 314 495 676 858 129 308 487 665 843 130 302 478 653 829 131 296 469 642 814 132 291 460 630 800 133 285 452 618 786 134 279 443 607 771 135 273 434 595 757 136 267 425 584 742 137 261 416 572 728 Copyright (c) 2006-2015, Texas Instruments Incorporated Product Folder Links: LM94022 LM94022-Q1 Submit Documentation Feedback 13 LM94022, LM94022-Q1 SNIS140F - MAY 2006 - REVISED SEPTEMBER 2015 www.ti.com Table 2. LM94022/LM94022-Q1 Transfer Table (continued) TEMPERATURE (C) GS = 00 (mV) GS = 01 (mV) GS = 10 (mV) GS = 11 (mV) 138 255 408 560 713 139 249 399 549 699 140 243 390 537 684 141 237 381 525 670 142 231 372 514 655 143 225 363 502 640 144 219 354 490 626 145 213 346 479 611 146 207 337 467 597 147 201 328 455 582 148 195 319 443 568 149 189 310 432 553 150 183 301 420 538 7.4 Device Functional Modes 7.4.1 Capacitive Loads The LM94022/-Q1 handles capacitive loading well. In an extremely noisy environment, or when driving a switched sampling input on an ADC, it may be necessary to add some filtering to minimize noise coupling. Without any precautions, the LM94022/-Q1 can drive a capacitive load less than or equal to 1100 pF as shown in Figure 13. For capacitive loads greater than 1100 pF, a series resistor may be required on the output, as shown in Figure 14. VDD LM94022 OPTIONAL BYPASS CAPACITANCE OUT GND CLOAD < 1100 pF Figure 13. LM94022/-Q1 No Decoupling Required for Capacitive Loads Less than 1100 pF VDD RS LM94022 OPTIONAL BYPASS CAPACITANCE OUT GND CLOAD > 1100 pF Figure 14. LM94022/-Q1 With Series Resistor for Capacitive Loading Greater than 1100 pF CLOAD 14 Submit Documentation Feedback MINIMUM RS 1.1 nF to 99 nF 3 k 100 nF to 999 nF 1.5 k 1 F 800 Copyright (c) 2006-2015, Texas Instruments Incorporated Product Folder Links: LM94022 LM94022-Q1 LM94022, LM94022-Q1 www.ti.com SNIS140F - MAY 2006 - REVISED SEPTEMBER 2015 7.4.2 Output Voltage Shift The LM94022/-Q1 is very linear over temperature and supply voltage range. Due to the intrinsic behavior of an NMOS/PMOS rail-to-rail buffer, a slight shift in the output can occur when the supply voltage is ramped over the operating range of the device. The location of the shift is determined by the relative levels of VDD and VOUT. The shift typically occurs when VDD - VOUT = 1 V. This slight shift (a few mV) takes place over a wide change (approximately 200 mV) in VDD or VOUT. Because the shift takes place over a wide temperature change of 5C to 20C, VOUT is always monotonic. The accuracy specifications in the Electrical Characteristics table already include this possible shift. 7.4.3 Selectable Gain for Optimization and in Situ Testing The Gain Select digital inputs can be tied to the rails or can be driven from digital outputs such as microcontroller GPIO pins. In low-supply voltage applications, the ability to reduce the gain to -5.5 mV/C allows the LM94022/Q1 to operate over the full -50C to 150C range. When a larger supply voltage is present, the gain can be increased as high as -13.6 mV/C. The larger gain is optimal for reducing the effects of noise (for example, noise coupling on the output line or quantization noise induced by an analog-to-digital converter which may be sampling the LM94022/-Q1 output). Another application advantage of the digitally selectable gain is the ability to perform dynamic testing of the LM94022/-Q1 while it is running in a system. By toggling the logic levels of the gain select pins and monitoring the resultant change in the output voltage level, the host system can verify the functionality of the LM94022/-Q1. Copyright (c) 2006-2015, Texas Instruments Incorporated Product Folder Links: LM94022 LM94022-Q1 Submit Documentation Feedback 15 LM94022, LM94022-Q1 SNIS140F - MAY 2006 - REVISED SEPTEMBER 2015 www.ti.com 8 Application and Implementation NOTE Information in the following applications sections is not part of the TI component specification, and TI does not warrant its accuracy or completeness. TI's customers are responsible for determining suitability of components for their purposes. Customers should validate and test their design implementation to confirm system functionality. 8.1 Application Information The LM94022/-Q1 features make it suitable for many general temperature sensing applications. It can operate over a supply range of 1.5 V to 5.5 V with programmable output slope and a wide -50C to +150C temperature range, thus allowing flexibility for different temperature and supply voltage range combinations. 8.1.1 LM94022 Transfer Function The LM94022 has four selectable gains, each of which can be selected by the GS1 and GS0 input pins. The output voltage for each gain, across the complete operating temperature range is shown in Table 2. This table is the reference from which the LM94022 accuracy specifications (listed in the Electrical Characteristics section) are determined. Although the LM94022 transfer curves are very linear, they do have a slight umbrella parabolic shape. This shape is very accurately reflected in Table 2. The transfer table was used to calculate the following equations. mV mV J2,G00 : VTEMP mV = 870.6mV - 5.506 T - 30C - 0.00176 2 T - 30C 2 C C mV mV J3,G01 : VTEMP mV = 1324.0mV - 8.194 T - 30C - 0.00262 2 T - 30C 2 C C mV mV J4,G10 : VTEMP mV = 1777.3mV - 10.888 T - 30C - 0.00347 2 T - 30C 2 C C mV mV J5,G11 : VTEMP mV = 2230.8mV - 13.582 T - 30C - 0.00433 2 T - 30C 2 C C (1) A linear approximation can be useful over a narrow temperature range. A line can easily be calculated over the desired temperature range from the table using the two-point equation: * V - V1 = V2 - V1 T2 - T1 * u (T - T1) where * * * * V is in mV, T is in C, T1 and V1 are the coordinates of the lowest temperature, T2 and V2 are the coordinates of the highest temperature. (2) For example, to determine the equation of a line with the Gain Setting at GS1 = 0 and GS0 = 0, over a temperature range of 20C to 50C, proceed as follows: 760 mV - 925 mV * u (T - 20oC) 50oC - 20oC * V - 925 mV = (3) o o V - 925 mV = (-5.50 mV / C) u (T - 20 C) (4) o V = (-5.50 mV / C) u T + 1035 mV (5) Using this method of linear approximation, the transfer function can be approximated for one or more temperature ranges of interest. The accuracy will suffer slightly in favor of easy conversion of the output voltage to temperature. 16 Submit Documentation Feedback Copyright (c) 2006-2015, Texas Instruments Incorporated Product Folder Links: LM94022 LM94022-Q1 LM94022, LM94022-Q1 www.ti.com SNIS140F - MAY 2006 - REVISED SEPTEMBER 2015 8.2 Typical Application SAR Analog-to-Digital Converter Reset +1.5V to +5.5V Input Pin LM94022 4 VDD OUT 3 CBP GND 5 GS1 GS0 2 CFILTER Sample RIN CIN CSAMPLE 1 Figure 15. Suggested Connection to a Sampling Analog-to-Digital Converter Input Stage 8.2.1 Design Requirements Most CMOS ADCs found in microcontrollers and ASICs have a sampled data comparator input structure. When the ADC charges the sampling cap, it requires instantaneous charge from the output of the analog source such as the LM94022/-Q1 temperature sensor and many op amps. This requirement is easily accommodated by the addition of a capacitor CFILTER). 8.2.2 Detailed Design Procedure The size of CFILTER depends on the size of the sampling capacitor and the sampling frequency. Since not all ADCs have identical input stages, the charge requirements will vary. This general ADC application is shown as an example only. 8.2.3 Application Curve Figure 16. Programmable Analog Output Transfer Function Copyright (c) 2006-2015, Texas Instruments Incorporated Product Folder Links: LM94022 LM94022-Q1 Submit Documentation Feedback 17 LM94022, LM94022-Q1 SNIS140F - MAY 2006 - REVISED SEPTEMBER 2015 www.ti.com 8.3 System Examples 8.3.1 Application Circuits VDD (+1.5V to +5.5V) VDD Single Battery Cell LM94022 GS1 OUT GS0 GND Figure 17. Full-Range Celsius Temperature Sensor (-50C to +150C) Operating from a Single Battery Cell V+ VTEMP R3 VT1 R4 VT2 LM4040 VDD VT R1 4.1V U3 0.1 PF LM94022 R2 (High = overtemp alarm) + U1 - VOUT VOUT VTemp U2 VT1 = (4.1)R2 R1 + R2||R3 VT2 = (4.1)R2 R2 + R1||R3 Figure 18. Celsius Thermostat VDD SHUTDOWN VOUT LM94022 Any logic device output Figure 19. Conserving Power Dissipation With Shutdown 18 Submit Documentation Feedback Copyright (c) 2006-2015, Texas Instruments Incorporated Product Folder Links: LM94022 LM94022-Q1 LM94022, LM94022-Q1 www.ti.com SNIS140F - MAY 2006 - REVISED SEPTEMBER 2015 9 Power Supply Recommendations The LM94022/-Q1 low supply current and supply range of 1.5 V to 5.5 V allow the device to easily be powered from many sources. Power supply bypassing is optional and is mainly dependent on the noise on the power supply. In noisy systems it may be necessary to add bypass capacitors to the lower the noise that couples to the output of the LM94022/Q1. 10 Layout 10.1 Layout Guidelines 10.1.1 Mounting and Thermal Conductivity The LM94022/-Q1 can be applied easily in the same way as other integrated-circuit temperature sensors. It can be glued or cemented to a surface. To ensure good thermal conductivity, the backside of the LM94022/-Q1 die is directly attached to the GND pin (Pin 2). The temperatures of the lands and traces to the other leads of the LM94022/-Q1 will also affect the temperature reading. Alternatively, the LM94022/-Q1 can be mounted inside a sealed-end metal tube, and can then be dipped into a bath or screwed into a threaded hole in a tank. As with any IC, the LM94022/-Q1 and accompanying wiring and circuits must be kept insulated and dry, to avoid leakage and corrosion. This is especially true if the circuit may operate at cold temperatures where condensation can occur. If moisture creates a short circuit from the output to ground or VDD, the output from the LM94022/-Q1 will not be correct. Printed-circuit coatings are often used to ensure that moisture cannot corrode the leads or circuit traces. The thermal resistance junction to ambient (JA) is the parameter used to calculate the rise of a device junction temperature due to its power dissipation. The equation used to calculate the rise in the die temperature of the LM94022/-Q1 is: [ TJ = TA + TJA (VDDIQ) + (VDD - VO) IL ] where * * * * TA is the ambient temperature, IQ is the quiescent current, ILis the load current on the output, and VO is the output voltage. (6) For example, in an application where TA = 30 C, VDD = 5 V, IDD = 9 A, Gain Select = 11, VOUT = 2.231 mV, and IL = 2 A, the junction temperature would be 30.021 C, showing a self-heating error of only 0.021C. Because the junction temperature of the LM94022 is the actual temperature being measured, take care to minimize the load current that the LM94022/-Q1 is required to drive. Table 3 shows the thermal resistance of the LM94022/Q1. Table 3. LM94022/LM94022-Q1 Thermal Resistance DEVICE NUMBER NS PACKAGE NUMBER THERMAL RESISTANCE (JA) LM94022BIMG DCK0005A 415C/W Copyright (c) 2006-2015, Texas Instruments Incorporated Product Folder Links: LM94022 LM94022-Q1 Submit Documentation Feedback 19 LM94022, LM94022-Q1 SNIS140F - MAY 2006 - REVISED SEPTEMBER 2015 www.ti.com 10.2 Layout Example The LM94022/-Q1 is extremely simple to layout electrically. If a power supply bypass capacitor is used it should be connected as shown in Figure 20. The device pins and layout greatly influence the temperature that the LM94022/-Q1 die is measuring thus thermal modeling is recommended to ensure that the device is sensing the proper temperature. VIA to ground plane VIA to power plane VIA to power plane or ground plane GS0 GS1 GND OUT VDD 0.01 F Figure 20. Recommended Layout 10.3 Output and Noise Considerations A push-pull output gives the LM94022/-Q1 the ability to sink and source significant current. This is beneficial when, for example, driving dynamic loads like an input stage on an analog-to-digital converter (ADC). In these applications the source current is required to quickly charge the input capacitor of the ADC. See the Application Circuits section for more discussion of this topic. The LM94022/-Q1 is ideal for this and other applications which require strong source or sink current. The supply-noise gain of the LM94022 (the ratio of the AC signal on VOUT to the AC signal on VDD) was measured during bench tests. It is typical attenuation is shown in the Typical Characteristics section. A load capacitor on the output can help to filter noise. For operation in very noisy environments, some bypass capacitance should be present on the supply within approximately 2 inches of the LM94022/-Q1. 20 Submit Documentation Feedback Copyright (c) 2006-2015, Texas Instruments Incorporated Product Folder Links: LM94022 LM94022-Q1 LM94022, LM94022-Q1 www.ti.com SNIS140F - MAY 2006 - REVISED SEPTEMBER 2015 11 Device and Documentation Support 11.1 Related Links The table below lists quick access links. Categories include technical documents, support and community resources, tools and software, and quick access to sample or buy. Table 4. Related Links PARTS PRODUCT FOLDER SAMPLE & BUY TECHNICAL DOCUMENTS TOOLS & SOFTWARE SUPPORT & COMMUNITY LM94022 Click here Click here Click here Click here Click here LM94022-Q1 Click here Click here Click here Click here Click here 11.2 Community Resources The following links connect to TI community resources. Linked contents are provided "AS IS" by the respective contributors. They do not constitute TI specifications and do not necessarily reflect TI's views; see TI's Terms of Use. TI E2ETM Online Community TI's Engineer-to-Engineer (E2E) Community. Created to foster collaboration among engineers. At e2e.ti.com, you can ask questions, share knowledge, explore ideas and help solve problems with fellow engineers. Design Support TI's Design Support Quickly find helpful E2E forums along with design support tools and contact information for technical support. 11.3 Trademarks E2E is a trademark of Texas Instruments. All other trademarks are the property of their respective owners. 11.4 Electrostatic Discharge Caution These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. 11.5 Glossary SLYZ022 -- TI Glossary. This glossary lists and explains terms, acronyms, and definitions. 12 Mechanical, Packaging, and Orderable Information The following pages include mechanical, packaging, and orderable information. This information is the most current data available for the designated devices. This data is subject to change without notice and revision of this document. For browser-based versions of this data sheet, refer to the left-hand navigation. Copyright (c) 2006-2015, Texas Instruments Incorporated Product Folder Links: LM94022 LM94022-Q1 Submit Documentation Feedback 21 PACKAGE OPTION ADDENDUM www.ti.com 11-Jan-2021 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan (2) Lead finish/ Ball material MSL Peak Temp Op Temp (C) Device Marking (3) (4/5) (6) LM94022BIMG NRND SC70 DCK 5 1000 Non-RoHS & Green Call TI Call TI -50 to 150 22B LM94022BIMG/NOPB ACTIVE SC70 DCK 5 1000 RoHS & Green SN Level-1-260C-UNLIM -50 to 150 22B LM94022BIMGX/NOPB ACTIVE SC70 DCK 5 3000 RoHS & Green SN Level-1-260C-UNLIM -50 to 150 22B LM94022QBIMG/NOPB ACTIVE SC70 DCK 5 1000 RoHS & Green SN Level-1-260C-UNLIM -50 to 150 22Q LM94022QBIMGX/NOPB ACTIVE SC70 DCK 5 3000 RoHS & Green SN Level-1-260C-UNLIM -50 to 150 22Q (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based flame retardants must also meet the <=1000ppm threshold requirement. (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead finish/Ball material - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead finish/Ball material values may wrap to two lines if the finish value exceeds the maximum column width. Addendum-Page 1 Samples PACKAGE OPTION ADDENDUM www.ti.com 11-Jan-2021 Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF LM94022, LM94022-Q1 : * Catalog: LM94022 * Automotive: LM94022-Q1 NOTE: Qualified Version Definitions: * Catalog - TI's standard catalog product * Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects Addendum-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 29-Sep-2019 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant LM94022BIMG SC70 DCK 5 1000 178.0 8.4 2.25 2.45 1.2 4.0 8.0 Q3 LM94022BIMG/NOPB SC70 DCK 5 1000 178.0 8.4 2.25 2.45 1.2 4.0 8.0 Q3 LM94022BIMGX/NOPB SC70 DCK 5 3000 178.0 8.4 2.25 2.45 1.2 4.0 8.0 Q3 LM94022QBIMG/NOPB SC70 DCK 5 1000 178.0 8.4 2.25 2.45 1.2 4.0 8.0 Q3 LM94022QBIMGX/NOPB SC70 DCK 5 3000 178.0 8.4 2.25 2.45 1.2 4.0 8.0 Q3 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 29-Sep-2019 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) LM94022BIMG SC70 DCK 5 1000 210.0 185.0 35.0 LM94022BIMG/NOPB SC70 DCK 5 1000 210.0 185.0 35.0 LM94022BIMGX/NOPB SC70 DCK 5 3000 210.0 185.0 35.0 LM94022QBIMG/NOPB SC70 DCK 5 1000 210.0 185.0 35.0 LM94022QBIMGX/NOPB SC70 DCK 5 3000 210.0 185.0 35.0 Pack Materials-Page 2 IMPORTANT NOTICE AND DISCLAIMER TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES "AS IS" AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, or other requirements. These resources are subject to change without notice. TI grants you permission to use these resources only for development of an application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims, damages, costs, losses, and liabilities arising out of your use of these resources. TI's products are provided subject to TI's Terms of Sale (https:www.ti.com/legal/termsofsale.html) or other applicable terms available either on ti.com or provided in conjunction with such TI products. TI's provision of these resources does not expand or otherwise alter TI's applicable warranties or warranty disclaimers for TI products.IMPORTANT NOTICE Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2021, Texas Instruments Incorporated