DATA SHEET HY19-12, HY19-12LF: 90-Degree Hybrid 1.85-1.99 GHz Features Block Diagram Low cost Low profile Small SOIC-8 package Available on tape and reel Available lead (Pb)-free and RoHS-compliant MSL-1 @ 260 C per JEDEC J-STD-020 In Direct Isolated Coupled Description The HY19-12 is a 90-degree hybrid tuned for the 1.85-1.99 GHz band. The monolithic circuitry is 100% passive and offers low loss, high isolation and exceptional phase/amplitude balance. It is available in the SOIC-8 surface mount package. NEW Skyworks offers lead (Pb)-free, RoHS (Restriction of Hazardous Substances)-compliant packaging. Electrical Specifications at 25 C ZO = 50 , unless otherwise noted Parameter Frequency Frequency Min. Insertion loss(1) Isolation Typ. 1.85 Max. Unit 1.99 GHz 0.6 dB 0.5 17 20 dB VSWR All ports 1.3:1 1.5:1 Amplitude balance 0.5 1.1 dB 1 2 Deg. Phase balance 1. Less 3 dB power split. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 200234 Rev. B * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * June 8, 2006 1 DATA SHEET * HY19-12, HY19-12LF Pin Out 8 Direct 7 GND 6 GND 5 4 ISOL. 3 GND 2 GND 1 RF In The Pin Out diagram shows the HY19-12 configured for a divider/coupler with Pin 1 as the input port and a 50 termination to be placed at Pin 3. Since the HY19-12 is symmetric, any nonground pin may be used as the input port. The following table shows the possible pin connection combinations for the HY19-12 used as a divider/coupler: Coupled Input Termination Direct Coupled Pin 1 Pin 4 Pin 8 Pin 5 Pin 4 Pin 1 Pin 5 Pin 8 Pin 5 Pin 8 Pin 4 Pin 1 Pin 8 Pin 5 Pin 1 Pin 4 Typical Performance Data ZO = 50 , unless otherwise noted 1.30 -3.0 1.25 -3.2 Direct VSWR (:1) Loss (dB) 1.20 -3.4 -3.6 1.10 Coupled -3.8 -4.0 1.85 1.15 1.05 1.87 1.89 1.91 1.93 1.95 1.97 1.00 1.85 1.99 1.87 1.89 1.91 1.93 1.95 1.97 Frequency (GHz) Frequency (GHz) Path Losses vs. Frequency Input VSWR vs. Frequency 1.00 1.99 1.30 0.75 1.25 0.25 VSWR (:1) Balance (dB) 0.50 0 -0.25 1.20 Coupled 1.15 1.10 Direct -0.50 1.05 -0.75 -1.00 1.85 1.87 1.89 1.91 1.93 1.95 1.97 1.99 1.00 1.85 1.87 1.89 1.91 1.93 1.95 Frequency (GHz) Frequency (GHz) Amplitude Balance vs. Frequency Output VSWR vs. Frequency Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 2 1.97 June 8, 2006 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * 200234 Rev. B 1.99 91.0 0 90.6 -9 Isolation (dB) Phase (Deg.) DATA SHEET * HY19-12, HY19-12LF 90.2 89.8 89.4 -27 -36 89.0 1.85 1.87 1.89 1.91 1.93 1.95 1.97 -45 1.85 1.99 1.87 1.89 1.91 1.93 1.95 1.97 Frequency (GHz) Frequency (GHz) Coupled - Direct Phase vs. Frequency Isolation vs. Frequency Absolute Maximum Ratings Characteristic Input -18 power(1) 1.99 Recommended Board Layout 0.1630 Value 4W Operating temperature -40 C to +85 C Storage temperature -65 C to +150 C Electrostatic discharge 125 V 1. Exceeding these parameters may cause irreversible damage. Performance is guaranteed only under the conditions listed in the specifications table and is not guaranteed under the full range(s) described by the Absolute Maximum specifications. Exceeding any of the absolute maximum/minimum specifications may result in permanent damage to the device and will void the warranty. CAUTION: Although this device is designed to be as robust as possible, ESD (Electrostatic Discharge) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions must be employed at all times. 0.0424 0.0282 0.0200 Dia. Via 12 Places 0.0180 Typ. Materials 10 mil FR-4. Dimensions are in inches. SOIC-8 Pin 8 Recommended Solder Reflow Profiles Refer to the "Recommended Solder Reflow Profile" Application Note. 0.050 (1.27 mm) BSC 0.244 (6.20 mm) 0.228 (5.80 mm) Pin 1 Indicator Tape and Reel Information Refer to the "Discrete Devices and IC Switch/Attenuators Tape and Reel Package Orientation" Application Note. Pin 1 0.068 (1.73 mm) Max. 0.197 (5.00 mm) 0.189 (4.80 mm) 0.010 (0.25 mm) 0.004 (0.10 mm) 0.020 (0.51 mm) Max. 0.049 (1.24 mm) 0.016 (0.41 mm) 0.016 Max. (0.41 mm) x 45 Chamfer 0.158 (4.00 mm) 0.150 (3.80 mm) 0.010 (0.25 mm) 0.007 (0.17 mm) 8 Max. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 200234 Rev. B * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * June 8, 2006 3 DATA SHEET * HY19-12, HY19-12LF Copyright (c) 2002, 2003, 2004, 2005, 2006, Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. ("Skyworks") products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and "Breakthrough Simplicity" are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 4 June 8, 2006 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * 200234 Rev. B