PA10M/883
PA10MU 1
PA10M/883
BURN IN CIRCUIT
* These components are used to stabilize device due to
poor high frequency characteristics of burn in board.
** Input signals are calculated to result in internal power
dissipation of approximately 2.1W at case temperature
= 125°C.
SG PARAMETER SYMBOL TEMP. POWER TEST CONDITIONS MIN MAX UNITS
1 Quiescent current IQ 25°C ±40V VIN = 0, AV = 100, RCL = .1Ω 30 mA
1 Input offset voltage VOS 25°C ±40V VIN = 0, AV = 100 ±6 mV
1 Input offset voltage VOS 25°C ±10V VIN = 0, AV = 100 ±12 mV
1 Input offset voltage VOS 25°C ±45V VIN = 0, AV = 100 ±7 mV
1 Input bias current, +IN +IB 25°C ±40V VIN = 0 ±30 nA
1 Input bias current, –IN –IB 25°C ±40V VIN = 0 ±30 nA
1 Input offset current IOS 25°C ±40V VIN = 0 ±30 nA
3 Quiescent current IQ –55°C ±40V VIN = 0, AV = 100, RCL = .1Ω 75 mA
3 Input offset voltage VOS –55°C ±40V VIN = 0, AV = 100 ±11.2 mV
3 Input offset voltage VOS –55°C ±10V VIN = 0, AV = 100 ±17.2 mV
3 Input offset voltage VOS –55°C ±45V VIN = 0, AV = 100 ±12.2 mV
3 Input bias current, +IN +IB –55°C ±40V VIN = 0 ±115 nA
3 Input bias current, –IN –IB –55°C ±40V VIN = 0 ±115 nA
3 Input offset current IOS –55°C ±40V VIN = 0 ±115 nA
2 Quiescent current IQ 125°C ±40V VIN = 0, AV = 100, RCL = .1Ω 30 mA
2 Input offset voltage VOS 125°C ±40V VIN = 0, AV = 100 ±12.5 mV
2 Input offset voltage VOS 125°C ±10V VIN = 0, AV = 100 ±18.5 mV
2 Input offset voltage VOS 125°C ±45V VIN = 0, AV = 100 ±13.5 mV
2 Input bias current, +IN +IB 125°C ±40V VIN = 0 ±70 nA
2 Input bias current, –IN –IB 125°C ±40V VIN = 0 ±70 nA
2 Input offset current IOS 125°C ±40V VIN = 0 ±70 nA
4 Output voltage, IO = 5A VO 25°C ±18V RL = 2.07Ω 10 V
4 Output voltage, IO = 80mA VO 25°C ±45V RL = 500Ω 40 V
4 Output voltage, IO = 2A VO 25°C ±30V RL = 12Ω 24 V
4 Current limits ICL 25°C ±17V RL = 12Ω, RCL = 1Ω .6 .89 A
4 Stability/noise EN 25°C ±40V RL = 100Ω, AV = 1, CL = .33nF 1 mV
4 Slew rate SR 25°C ±40V RL = 500Ω 2 10 V/µs
4 Open loop gain AOL 25°C ±40V RL = 500Ω, F = 10Hz 96 dB
4 Common mode rejection CMR 25°C ±15V RL = 500Ω, F = DC, VCM = ±9V 74 dB
6 Output voltage, IO = 5A VO –55°C ±18V RL = 2.07Ω 10 V
6 Output voltage, IO = 80mA VO –55°C ±45V RL = 500Ω 40 V
6 Output voltage, IO = 2A VO –55°C ±30V RL = 12Ω 24 V
6 Stability/noise EN –55°C ±40V RL = 100Ω, AV = 1, CL = .33nF 1 mV
6 Slew rate SR –55°C ±40V RL = 500Ω 2 10 V/µs
6 Open loop gain AOL –55°C ±40V RL = 500Ω, F = 10Hz 96 db
6 Common mode rejection CMR –55°C ±15V RL = 500Ω, F = DC, VCM = ±9V 74 dB
5 Output voltage, IO = 3A VO 125°C ±14.3V RL = 2.07Ω 6.3 V
5 Output voltage, IO = 80mA VO 125°C ±45V RL = 500Ω 40 V
5 Output voltage, IO = 2A VO 125°C ±30V RL = 12Ω 24 V
5 Stability/noise EN 125°C ±40V RL = 100Ω, AV = 1, CL = .33nF 1 mV
5 Slew rate SR 125°C ±40V RL = 500Ω 2 10 V/µs
5 Open loop gain AOL 125°C ±40V RL = 500Ω, F = 10Hz 96 dB
5 Common mode rejection CMR 125°C ±15V RL = 500Ω, F = DC, VCM = ±9V 74 dB
100KΩ
1Ω
1Ω
100KΩ
+15V
–15V
5
6
2
1
8
3
20Ω
* *
*
*
U.U.T
4
Table 4 Group A Inspection
PA10M/883
Copyright © Apex Microtechnology, Inc. 2012
(All Rights Reserved)
www.apexanalog.com SEP 2012
PA10MU REVN
PA10M/883
2 PA10MU
NEED TECHNICAL HELP? CONTACT APEX SUPPORT!
For all Apex Microtechnology product questions and inquiries, call toll free 800-546-2739 in North America.
For inquiries via email, please contact apex.support@apexanalog.com.
International customers can also request support by contacting their local Apex Microtechnology Sales Representative.
To nd the one nearest to you, go to www.apexanalog.com
IMPORTANT NOTICE
Apex Microtechnology, Inc. has made every effort to insure the accuracy of the content contained in this document. However, the information is subject to change
without notice and is provided "AS IS" without warranty of any kind (expressed or implied). Apex Microtechnology reserves the right to make changes without further
notice to any specications or products mentioned herein to improve reliability. This document is the property of Apex Microtechnology and by furnishing this informa-
tion, Apex Microtechnology grants no license, expressed or implied under any patents, mask work rights, copyrights, trademarks, trade secrets or other intellectual
property rights. Apex Microtechnology owns the copyrights associated with the information contained herein and gives consent for copies to be made of the informa-
tion only for use within your organization with respect to Apex Microtechnology integrated circuits or other products of Apex Microtechnology. This consent does not
extend to other copying such as copying for general distribution, advertising or promotional purposes, or for creating any work for resale.
APEX MICROTECHNOLOGY PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED TO BE SUITABLE FOR USE IN PRODUCTS USED FOR
LIFE SUPPORT, AUTOMOTIVE SAFETY, SECURITY DEVICES, OR OTHER CRITICAL APPLICATIONS. PRODUCTS IN SUCH APPLICATIONS ARE UNDER-
STOOD TO BE FULLY AT THE CUSTOMER OR THE CUSTOMER’S RISK.
Apex Microtechnology, Apex and Apex Precision Power are trademarks of Apex Microtechnolgy, Inc. All other corporate names noted herein may be trademarks
of their respective holders.
Copyright © Apex Microtechnology, Inc. 2012
(All Rights Reserved)
www.apexanalog.com SEP 2012
PA10MU REVN