TIP131, TIP132 (NPN), TIP137 (PNP) Darlington Complementary Silicon Power Transistors Designed for general-purpose amplifier and low-speed switching applications. http://onsemi.com Features DARLINGTON 8 AMPERE COMPLEMENTARY SILICON POWER TRANSISTORS 80-100 VOLTS, 70 WATTS * High DC Current Gain - * * * * hFE = 2500 (Typ) @ IC = 4.0 Adc Collector-Emitter Sustaining Voltage - @ 30 mAdc VCEO(sus) = 80 Vdc (Min) - TIP131 = 100 Vdc (Min) - TIP132, TIP137 Low Collector-Emitter Saturation Voltage - VCE(sat) = 2.0 Vdc (Max) @ IC = 4.0 Adc = 3.0 Vdc (Max) @ IC = 6.0 Adc Monolithic Construction with Built-In Base-Emitter Shunt Resistors Pb-Free Packages are Available* MARKING DIAGRAM 4 TO-220AB CASE 221A STYLE 1 MAXIMUM RATINGS Rating Collector-Emitter Voltage Symbol TIP131 TIP132 TIP137 1 Unit VCEO 80 100 Vdc Collector-Base Voltage VCB 80 100 Vdc Emitter-Base Voltage VEB 5.0 Vdc IC 8.0 12 Adc Base Current IB 300 mAdc Total Power Dissipation @ TC = 25C PD 70 W Total Power Dissipation @ TA = 25C PD 2.0 W TJ, Tstg -65 to +150 C Collector Current - Continuous Peak Operating and Storage Junction, Temperature Range 3 TIP13x x A Y WW G Symbol Max Unit Thermal Resistance, Junction-to-Case RqJC 1.78 C/W Thermal Resistance, Junction-to-Ambient RqJA 63.5 C/W TIP131 TIP131G TIP132 TIP132G Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. BASE COLLECTOR EMITTER COLLECTOR = Device Code = 1, 2, or 7 = Assembly Location = Year = Work Week = Pb-Free Package ORDERING INFORMATION Device THERMAL CHARACTERISTICS Characteristic 2 STYLE 1: PIN 1. 2. 3. 4. TIP13xG AYWW TIP137 TIP137G Package Shipping TO-220 50 Units/Rail TO-220 (Pb-Free) 50 Units/Rail TO-220 50 Units/Rail TO-220 (Pb-Free) 50 Units/Rail TO-220 50 Units/Rail TO-220 (Pb-Free) 50 Units/Rail *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. (c) Semiconductor Components Industries, LLC, 2011 September, 2011 - Rev. 3 1 Publication Order Number: TIP131/D TIP131, TIP132 (NPN), TIP137 (PNP) COLLECTOR PNP TIP137 COLLECTOR NPN TIP131 TIP132 BASE BASE 8.0 k 120 8.0 k 120 EMITTER EMITTER Figure 1. Darlington Circuit Schematic ELECTRICAL CHARACTERISTICS (TC = 25C unless otherwise noted) Characteristic Symbol Min Max 80 100 - - - - 0.5 0.5 - - 0.2 0.2 - 5.0 500 1000 - 15000 - - 2.0 3.0 - 2.5 Unit OFF CHARACTERISTICS Collector-Emitter Sustaining Voltage (Note 1) (IC = 30 mAdc, IB = 0) TIP131 TIP132, TIP137 Collector Cutoff Current (VCE = 40 Vdc, IB = 0) (VCE = 50 Vdc, IB = 0) TIP131 TIP132, TIP137 Collector Cutoff Current (VCB = 80 Vdc, IE = 0) (VCB = 100 Vdc, IE = 0) TIP131 TIP132, TIP137 Emitter Cutoff Current (VBE = 5.0 Vdc, IC = 0) VCEO(sus) Vdc ICEO mAdc ICBO IEBO mAdc mAdc ON CHARACTERISTICS (Note 1) hFE DC Current Gain (IC = 1.0 Adc, VCE = 4.0 Vdc) (IC = 4.0 Adc, VCE = 4.0 Vdc) Collector-Emitter Saturation Voltage (IC = 4.0 Adc, IB = 16 mAdc) (IC = 6.0 Adc, IB = 30 mAdc) VCE(sat) Base-Emitter On Voltage (IC = 4.0 Adc, VCE = 4.0 Vdc) VBE(on) 1. Pulse Test: Pulse Width v 300 ms, Duty Cycle v 2%. http://onsemi.com 2 - Vdc Vdc TIP131, TIP132 (NPN), TIP137 (PNP) PD, POWER DISSIPATION (WATTS) TA TC 4.0 80 3.0 60 TC 2.0 40 TA 1.0 20 0 0 0 20 40 60 80 100 T, TEMPERATURE (C) 120 140 160 r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) Figure 2. Power Derating 1.0 0.7 0.5 D = 0.5 0.3 0.2 0.2 0.1 P(pk) ZqJC(t) = r(t) RqJC RqJC = 1.78C/W MAX D CURVES APPLY FOR POWER PULSE TRAIN SHOWN t1 READ TIME AT t1 t2 TJ(pk) - TC = P(pk) ZqJC(t) DUTY CYCLE, D = t1/t2 0.1 0.05 0.07 0.05 0.02 0.03 0.02 0.01 SINGLE PULSE 0.01 0.01 0.02 0.05 0.1 0.2 0.5 1.0 2.0 5.0 t, TIME (ms) 10 Figure 3. Thermal Response http://onsemi.com 3 20 50 100 200 500 1.0 k TIP131, TIP132 (NPN), TIP137 (PNP) PACKAGE DIMENSIONS TO-220 CASE 221A-09 ISSUE AG -T- B F T SEATING PLANE C S 4 DIM A B C D F G H J K L N Q R S T U V Z A Q U 1 2 3 H K Z L R V NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. J G D N INCHES MIN MAX 0.570 0.620 0.380 0.405 0.160 0.190 0.025 0.036 0.142 0.161 0.095 0.105 0.110 0.161 0.014 0.025 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 ----0.080 STYLE 1: PIN 1. 2. 3. 4. MILLIMETERS MIN MAX 14.48 15.75 9.66 10.28 4.07 4.82 0.64 0.91 3.61 4.09 2.42 2.66 2.80 4.10 0.36 0.64 12.70 14.27 1.15 1.52 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 ----2.04 BASE COLLECTOR EMITTER COLLECTOR ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 http://onsemi.com 4 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative TIP131/D