LITE-ON SEMICONDUCTOR 1N4001L thru 1N4007L REVERSE VOLTAGE - 50 to 1000 Volts FORWARD CURRENT - 1.0 Ampere PLASTIC SILICON RECTIFIERS FEATURES A-405 Low cost Diffused junction Low forward voltage drop Low reverse leakage current High current capability A B A C D The plastic material carries UL recognition 94V-0 MECHANICAL DATA A-405 Case : JEDEC A-405 molded plastic Polarity : Color band denotes cathode Weight : 0.008 ounces, 0.22 grams Mounting position : Any Min. Dim. A 25.4 4.10 Max. 5.20 B 0.53 0.64 C 2.00 2.70 D All Dimensions in millimeter MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. SYMBOL 1N4001L 1N4002L 1N4003L 1N4004L 1N4005L 1N4006L 1N4007L UNIT CHARACTERISTICS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current VRRM VRMS VDC 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 V V V @TA =75 C I(AV) 1.0 A Peak Forward Surge Current 8.3ms single half sine-wave super imposed on rated load (JEDEC Method) IFSM 30 A I 2 t Rating for fusing (t < 8.3ms) I t 3.7 AS Maximum forward Voltage at 1.0A DC VF 1.0 V Maximum DC Reverse Current at Rated DC Blocking Voltage IR 5.0 50 uA CJ 15 pF R0JA 50 /w TJ -55 to +125 TSTG -55 to +150 2 @TJ =25 C @TJ =100 C Typical Junction Capacitance (Note 1) Typical Thermal Resistance (Note 2) Operating Temperature Range Storage Temperature Range NOTES : 1.Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 2.Thermal Resistance Junction to Ambient. 2 REV. 4, Jun-2011, KDAB01 RATING AND CHARACTERISTIC CURVES 1N4001L thru 1N4007L FIG.1 - FORWARD CURRENT DERATING CURVE 1.0 0.8 0.6 0.4 0.2 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0 25 50 75 100 FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD CURRENT AMPERES 1.2 125 150 30 20 10 Pulse width 8.3ms Single Half-Sine-Wave 0 1 175 2 20 10 50 100 NUMBER OF CYCLES AT 60Hz AMBIENT TEMPERATURE , () FIG.4 - TYPICAL FORWARD CHARACTERISTICS FIG.3 - TYPICAL JUNCTION CAPACITANCE 10 INSTANTANEOUS FORWARD CURRENT ,(A) 100 CAPACITANCE , (pF) 5 10 1.0 0.1 TJ = 25 PULSE WIDTH 300us TJ = 25, f= 1MHz 0.01 1 1 4 10 REVERSE VOLTAGE , (v) 100 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE , (V) 1.8 Legal Disclaimer Notice 1N4001L thru 1N4007L Important Notice and Disclaimer LSC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. LSC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does LSC assume any liability for application assistance or customer product design. LSC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of LSC. LSC products are not authorized for use as critical components in life support devices or systems without express written approval of LSC.