Product data sheet Miniature connectors Product description M16 IP40 female cable connector, Contacts: 6 DIN, 4.0 - 6.0 mm, shieldable, solder, IP40 Area Order number M16 IP40 series 581 99 2022 00 06 Illustration Scale drawing Contact arrangement (Plug-in side) You can find the component part drawing on the next page. Technical data General features Order number Connector design Version Connector locking system Termination Degree of protection Cross-sectional area Cable outlet Temperature range from/to Mechanical operation Weight (g) Customs tariff number Material 99 2022 00 06 female cable connector connector female straight screw solder IP40 max. 0.75 mm / max. AWG 18 4.0 - 6.0 mm -40 C / 85 C > 500 Mating cycles 28.929 85369010 Contact body material Contact material Contact plating REACH SVHC PBT (UL94 V-0) CuSn (bronze) Ag (silver) CAS 7439-92-1 (Lead) Declarations of conformity Low Voltage Directive 2014/35/EU (EN 60204-1:2018;EN 60529:1991) Electrical parameters Rated voltage Rated impulse voltage Rated current (40 C) Insulation resistance Pollution degree Overvoltage category Insulating material group EMC compliance 250 V 1500 V 5A 10 1 I III shieldable Date: 2020-10-08 - Page 1 of 3 Product data sheet Miniature connectors Product description M16 IP40 female cable connector, Contacts: 6 DIN, 4.0 - 6.0 mm, shieldable, solder, IP40 Area Order number M16 IP40 series 581 99 2022 00 06 Component part drawing Date: 2020-10-08 - Page 2 of 3 Powered by TCPDF (www.tcpdf.org) Product data sheet Miniature connectors Product description M16 IP40 female cable connector, Contacts: 6 DIN, 4.0 - 6.0 mm, shieldable, solder, IP40 Area Order number M16 IP40 series 581 99 2022 00 06 Security notices The connector must not be plugged or unplugged under load. Non-observance and improper use can result in personal injury. The connectors have been developed for applications in plant engineering, control and electrical equipment construction. The user is responsible for checking whether the connectors can also be used in other areas of application. To protect against unintentional opening of the connector, the thread between the housing and the connector head must be secured with a suitable cyanoacrylate adhesive when used in circuits with voltages dangerous to the touch. This does not apply to connectors used in SELV and PELV circuits according to IEC 61140 (EN 61140, VDE 0140-1). Connectors which are used in circuits with voltages dangerous to the touch may only be installed and used by, or under the supervision of, persons with electrical engineering training, taking into account the applicable regulations and standards. The plug connector is not suitable for mains voltages Please observe the pollution degree and the overvoltage category. For further information, please refer to the download center "Technical Information". To lock the cable connector with the device connector, the threaded ring is tightened "hand-tight" (approx. 50 cNm). Date: 2020-10-08 - Page 3 of 3