PME290 * EMI suppressor, classes X1 and Y2, metallized paper * 0.001 - 0.022 F, 250 VAC Y2, 300 VAC X1, +100 C * Self-extinguishing encapsulation. The material is recognized according to UL 94 V-0. * Very precise positioning of leads in relation to the case giving efficient utilisation of PC board space. * High dU/dt capability. * Excellent self-healing properties. Ensures long life even when subjected to frequent overvoltages. * Good resistance to ionisation due to impregnated dielectric. * The capacitors meet the most stringent IEC humidity class, 56 days. * The impregnated paper ensures excellent stability giving outstanding reliability properties,especially in applications having continuous operation. L 0.5 Multi-layer metallized paper. Encapsulated and impregnated in self-extinguishing material meeting the requirements of UL 94V-0. p 0.3 0.8 l For use in mains operated electronic equipment requiring safety components according to IEC 60065, edition 5, and/or national standards based on that document. Across-the-line, antenna-coupling and lineby-pass. The capacitor is also intended for use as interference suppressor in X1 and Y2 applications. CONSTRUCTION H TYPICAL APPLICATIONS B TECHNICAL DATA l = standard : 30 +5/-0 mm option : short leads, tolerance +0/-1 mm (standard 6 mm, code R06) Other lead lengths on request Rated voltage 250 VAC, Y2; 300 VAC, X1; 50/60 Hz Capacitance range 0.001 - 0.022 F Capacitance tolerance 20% Temperature range -40 to +100 C Climatic category IEC 40/100/56/C Approvals S, N, D, FI, VDE, SEV, IMQ, UL, CSA 20 Dissipation factor tan 1.3 % at 1 kHz 10 dB Attenuation 70 60 0.022 F 50 0.0047 F 40 0.001 F 30 f 0 Insulation resistance 12000 M Measured at 500 VDC after 60 s, +23C Resonance frequency Tabulated self-resonance frequencies f0 refer to 5 mm lead length. In DC applications Recommended voltage: 1000 VDC Test voltage between terminals The 100% screening factory test is carried out at 2000 VAC, 50 Hz, 2 s and at 3000 VDC, 1 s. The voltage level is selected to meet the requirements in applicable equipment standards. All electrical characteristics are checked after the test. 1 3 5 10 30 100 200 MHz Suppression versus frequency. Typical values. ENVIRONMENTAL TEST DATA Vibration IEC 60068-2-6, Test Fc Bump IEC 60068-2-29, Test Eb 4000 bumps at 390 m/s2 No visible damage, No open or short circuit Solderability IEC 60068-2-20, Test Ta Solder globule method Wetting time < 1 s Active flammability EN 132400 Passive flammability IEC 60384-14 (1993) EN 132400 Humidity IEC 60068-2-3, Test Ca 174 3 directions at 2 hour each 10 - 500 Hz at 0.75 mm or 98 m/s2 +40C and 90 - 95% R.H. No visible damage No open or short circuit 56 days PME290 Capaci- Max dimensions tance in mm F B H L p Quantity per package reel R30 R06 taped Weight f O pcs pcs pcs g MHz Max dU/dt V/s S N D FI VDE SEV IMQ UL CSA ARTICLE TABLE Approvals Article code 0.0010 0.0015 0.0022 0.0025 0.0033 0.0039 0.0047 4.5 4.5 5.5 5.5 5.5 5.5 5.5 12.5 12.5 12.0 12.0 13.5 13.5 14.5 13.0 13.0 13.0 13.0 13.0 13.0 13.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 800 800 800 800 800 800 600 1600 1600 1200 1200 1200 1200 1200 700 700 600 600 600 600 600 1.3 1.4 1.4 1.4 1.6 1.6 1.7 56 46 39 36 31 28 26 2000 2000 2000 2000 2000 2000 2000 PME290MA4100MR30 PME290MA4150MR30 PME290MA4220MR30 PME290MA4250MR30 PME290MA4330MR30 PME290MA4390MR30 PME290MA4470MR30 0.0068 0.010 0.015 0.022 5.5 7.5 8.5 8.5 14.5 13.5 14.5 17.0 18.0 18.0 18.0 18.0 15.0 15.0 15.0 15.0 500 400 250 250 800 600 500 400 600 400 400 400 2.1 2.6 3.0 3.6 18 15 12 9.8 1400 1400 1400 1400 PME290MB4680MR30 PME290MB5100MR30 PME290MB5150MR30 PME290MB5220MR30 MARKING APPROVALS/REFERENCE DOCUMENTS Certification Body Specification Approval reference S N D Fl EN 132400 EN 132400 EN 132400 EN 132400 VDE SEV IMQ UL CSA EN 132400 EN 132400 CEI 40-7/VI-1980 UL 1414 (250 VAC) C 22.2 No. 1 (250 VAC) C 22.2 No. 8 (250 VAC) 9511114 (Y2, X1) P95101669 (Y2, X1) 303829 (Y2, X1) 182218-01 (Y2) 182218-02 (X1) 131398 00.2218 V 2175 E 73869 53108 53108 ORDERING INFORMATION The article code for the standard part is given in the article table. For other options, see page 21. * * * * * * RIFA RIFA article code Rated capacitance Rated voltage SH, for self healing Climatic category according to IEC 60068-1, appendix A * Passive flammability class * Approval marks * Manufacturing code (year, month) PACKING Capacitors in standard design (lead length 30 mm) and with lead length 5 or 6 mm are packed bulk in a box with dimensions 245 x 145 x 80 mm. Quantity/package as per article table. Reels with taped capacitors are packed 10 in a box with dimension 370 x 370 x 560 mm. The standard quantity/reel is for 360 mm reel. If 500 mm reel is required, it must be specified when ordering and the quantity is 2 x the given quantity. 175