TP-104-PIN - M/A-COM Technology Solutions

• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and prod uct information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

RF Pulse Transformer,

750 KHz - 400 MHz

Rev. V3

TP-104

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Features

• 50 Ohms Unbalanced/200 Ohms Balanced

• Low Insertion Loss: 0.4 dB Typical

• DC Isolation: Input to Output

• MIL-STD-202 Screening Available

Description

The flux coupled Balun Transformer can provide a

wide range of impedance ratios: 1:1, 4:1, 9:1 and

16:1 are most common. DC isolation from primary

coil to secondary coil is also a feature of this device.

FP-1

Electrical Specifications: TA = -55°C to +85°C

Schematic/Pin Configuration

Parameter Test Conditions Frequency Units Min Typ Max

Impedance Input - 50 Ohms Unbalanced

Output - 200 Ohms Balanced — — — — —

Insertion Loss — 10 - 50 MHz dB — — 0.55

VSWR — 5 MHz - 200 MHz

750 MHz - 400 MHz

Ratio

—

— —

— 1.3:1

2.0:1

Input Power 750 MHz - 4 MHz

4 MHz - 400 MHz Watts

Watts —

— —

— 0.4

1.0

Rise Time 10 - 90% — nS — 0.55 —

Droop (10%) — — nS — 130 —