COMPANY MEDIA CENTER CAREERS CORPORATE RESPONSIBILITY INVESTOR RELATIONS CONTACT US
Terms of Use »
Trademarks »
Privacy Statement »
Retail Product Warranty »
Commercial Product Warranty
Policy »
Cookie Statement »
Evaluation Terms »
FSS Notification »
California Supply Chains Act »
Conditional Purchase Terms »
Terms and Conditions of Sale »
COMMERCIAL PRODUCT
WARRANTY POLICY
Limited Warranty for SanDisk® Commercial Hardware Drive Products
PLEASE CAREFULLY READ THE FOLLOWING TERMS AND CONDITIONS BEFORE PURCHASING, OPENING,
OR OTHERWISE USING THE PRODUCT MANUFACTURED BY WESTERN DIGITAL TECHNOLOGIES, INC.
(“MANUFACTURER”). YOUR USE OF THE PRODUCT CONSTITUTES AGREEMENT WITH THE TERMS AND
CONDITIONS OF THIS SANDISK® LIMITED WARRANTY STATEMENT (“AGREEMENT”). IF YOU DO NOT
AGREE TO THE TERMS AND CONDITIONS OF THIS AGREEMENT, DO NOT USE THE PRODUCT.
A. Warranty Information
1. This warranty ("Warranty") is provided by Western Digital Technologies, Inc. and its applicable subsidiary
(collectively, "Manufacturer"), is non‐transferable, and applies only to the SanDisk® Commercial Hardware Drive
Products identified in the Table in Section F below (each, a "Product"). The Warranty is provided solely to the
original end user purchaser of this Product or the original end user of a third party computer system which
contains the Product (“Customer”).
2. This Warranty does not cover purchases of the Products from a Reseller by a party who is not intending to be
the end user of the product. The warranty and support for that product must be initiated by the Reseller on that
party’s behalf.
3. This Warranty does not cover counterfeit, fake, or grey market products. Manufacturer will not provide any
support for any Products (i) that SanDisk has not transported (or authorized for transport) into the country of sale
and/or (ii) that are not sold through authorized channels.
4. Each Product is intended only for commercial use and should not be used by consumers or households. This
Warranty does not cover any personal non‐commercial use of the Product. If you have purchased this product
from an authorized retail outlet for personal non‐commercial use, please refer to the applicable provisions in the
retail warranty for the Product found at http://www.sandisk.com/wug.
5. If Customer’s Product includes separate standalone software programs provided by Manufacturer (e.g. SSD
Dashboard, Crypto Erase and FlashSoft), the use of those programs is governed by the end user license agreement
accompanying that program and not this Agreement.
6. This version of the warranty applies to Products purchased by Customer on or after July 21, 2016. For prior
versions of the Limited Warranty, please contact the SanDisk® customer service department (“Customer Service”)
at the contact information below.
B. Warranty Period Technical Support Information
1. Any technical support issues or warranty claims for the Products that arise during the first ninety (90) days after
delivery to the Customer should be processed through the party from whom Customer purchased the Product.
2. If the Product in question is already embedded or pre‐installed into a third‐party device or computer system,
Customer should contact the manufacturer of record for the third‐party product for primary technical support and
FOR HOME FOR BUSINESS OEM DESIGN ABOUT SANDISK SUPPORT
warranty claims.
3. If Customer purchased this product separately as an end user or if the manufacturer of the third party computer
system containing the Product has identified the Product as the sole source of the technical problem, then
Customer may seek technical support by contacting Customer Service within the Warranty Period by email
at support@SanDisk.com or at the telephone number for Customer’s region found
at http://www.sandisk.com/about/contact.html. Such technical support shall only address errors which are solely
attributable to the manufacture of the Product.
C. Warranty Terms
1. Manufacturer warrants to Customer that this Product, excluding content and/or software (if applicable)
supplied with or within the Product, will, during the applicable Warranty Period (as defined below) specified below
under normal use conditions, (a) be free from material defects in material or workmanship and, (b) will materially
conform to Manufacturer's published product specifications. A Product will be considered to have a material
defect or to be materially defective only if such Product does not meet the stated design lifetime (up to the
applicable Warranty Period) and is returned to the appropriate location within the Warranty Period and subject to
applicable performance threshold information contained in the Product's datasheet (as produced or provided by
Manufacturer).
2. This Warranty does not cover any damage to this Product which results from accident, abuse, misuse, natural or
personal disaster, improper installation, the presence of a third party product within a computer system, or any
unauthorized disassembly, repair or modification. It is possible for a Product to be used under conditions which
cause the media to wear out (and the Warranty to expire) prior to the expiration of the stated time period in the
Warranty Period, as specified in the applicable endurance specification.
3. In the event of a conflict between the terms of this Agreement and any existing valid set of warranty terms
between Customer and Manufacturer, the terms between Customer and Manufacturer shall take precedence over
this Agreement. However, this Agreement shall take precedence over the preprinted terms on all Customer forms
including, but not limited to, purchase orders issued by Customer.
D. Warranty Claims
1. To make a warranty claim, Customer may either (a) contact the distributing or reselling party from which the
purchase was made ("Reseller") within the Warranty Period and provide proof of purchase and the returning
party's original purchase status (showing date, place of purchase and name of the Reseller as applicable) and
product name, type and number or (b) receive a RMA number from Manufacturer and follow Manufacturer’s
warranty return procedures. Only the Customer is entitled to exercise the Warranty, and such Customer must
return the Product following the guidelines listed by Reseller and/or Manufacturer, including a detailed statement
of the problem sufficient to readily reproduce the problem. Manufacturer reserves the right, at its discretion, to
direct the Customer to return products through the Reseller.
2. A return may be required to another country other than the country in which the Customer is located and/or
purchased the Product.
3. If Customer believes that any Product fails to comply with the warranty and chooses to use Manufacturer’s
warranty procedures, then Customer will abide by Manufacturer’s then‐current Return Material Authorization
(“RMA”) process and Customer shall request an RMA number from Customer Service upon presenting a summary
of the defect. Manufacturer will then issue an RMA number to Customer, together with instructions on shipping to
Manufacturer the Product believed by Customer to be defective. Customer will return any such Product believed
to be defective in an appropriate container, which will conspicuously bear the RMA number Customer obtains
from Manufacturer prior to return. Products returned to Manufacturer under this section, and any repaired or
replaced Products under this Exhibit, will be delivered to and from Manufacturer at Manufacturer’s expense and
risk. Manufacturer (or a contractor of Manufacturer) shall assess the Product and, upon finding a defect, process
the return at Manufacturer’s sole expense. If Manufacturer determines that a defect does not exist in such
Product, Customer will reimburse Manufacturer for all expenses associated with the return of such Product.
Products improperly labelled, packaged or shipped may result in a voiding of the warranty for that Product.
Manufacturer is not responsible for damage incurred during shipping to our RMA receiving locations.
4. Manufacturer may elect to repair or replace any non‐conforming Product. Such replacement will be made with
a new or reconditioned Product of equal or greater functionality as the returned Product. If Manufacturer is not
able to repair or replace the non‐conforming Product, or if such options are not commercially reasonable, then
Manufacturer shall provide Customer a credit for the non‐conforming Product. The value of the credit shall be, at
Manufacturer’s discretion, either (a) the replacement value of the non‐conforming Product or (b) the purchase
value of the non‐conforming Product, prorated for the length of the warranty term during which Customer was
denied use of the Product. An obsolete or discontinued product may be replaced with the same Product or, if a
replacement is not available, a Product having similar function and capacity. Customer’s remedy under this section
may be conditioned on Manufacturer’s requirement that the Product be physically returned.
5. Manufacturer is not responsible for any loss or damage to data as part of the RMA process. Customer
understands that Manufacturer may have inadvertent access to the data on the returned Product during the RMA
process. In order to protect sensitive data from disclosure, Manufacturer recommends deletion of as much
sensitive data from the Product as technically possible before sending the Product for RMA processing. If it is not
the case that all data is or can be removed, the Customer shall indemnify, defend and hold harmless Manufacturer
and the Reseller for any possible liability associated with the potential presence in the returned Product of
sensitive and/or personal data, regardless of whether this data relates to the Customer or any other third party.
6. Manufacturer shall not be liable for (a) any incidental, indirect, special, exemplary, punitive or consequential
damages, including but not limited to loss of profits and/or loss of data, other loss, damage or expense directly or
indirectly arising from any defect or inability to use the Product or poor performance, either separately or in
combination with other equipment, regardless of whether Manufacturer or the Customer has been advised of the
possibility of such damages, nor (b) any amounts in the aggregate in excess of the purchase price paid for the
applicable Product(s). Manufacturer is not liable for and does not cover under this Warranty, any costs associated
with servicing and/or the installation of SanDisk® products, including the Product. This Warranty sets forth the
entire liability and obligations of Manufacturer with respect to defects, breach of warranty or any other failure to
perform or meet specification associated with any Products.
7. Manufacturer products, including the Product, must not be used in applications where failure could threaten
injury or life, such as aviation, automotive, nuclear, medical or life support systems (or any other form of ultra‐
hazardous applications), and under no circumstances shall Manufacturer have any Warranty or other obligations
arising from any such Product uses.
E. DISCLAIMER
THE WARRANTY STATED HEREIN IS THE CUSTOMER’S SOLE SOURCE OF WARRANTY RIGHTS ASSOCIATED
WITH PRODUCTS, AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED OR STATUTORY,
INCLUDING, WITHOUT LIMITATION, WARRANTIES OF FITNESS FOR PARTICULAR PURPOSE,
MERCHANTABILITY AND NONINFRINGEMENT, ALL OF WHICH ARE HEREBY DISCLAIMED. NO WARRANTY
RIGHTS ARE GRANTED TO ANY PARTY OTHER THAN THE CUSTOMER OF THE PRODUCT. THE LAWS OF
CERTAIN JURISDICTIONS MAY CONFER OTHER RIGHTS WHICH ARE NOT AFFECTED BY THIS WARRANTY.
F. Warranty Period
1. The term of the Warranty ("Warranty Period") referred to above is measured in calendar years and begins upon
the shipment date of the Product by Manufacturer. Any “X” inside a SKU represents a variable.
For the following group of products, The Warranty Period expires at the end of the earlier of (a) the stated time
period for the Product identified below or (b) the point at which Customer’s use of the Product exceeds the stated
endurance limit, which is (i) the time at which such Product’s total cumulative data (as recorded on the Product’s
S.M.A.R.T. attribute (E6h/230) “Media Wear Out Indicator”) reaches 100% of the Product’s endurance value; or (ii)
the Product’s total Terabytes Written (TBW) as identified in the table below or in the Specifications for the Product.
In the event of a conflict between the table below and the Specifications, the Specifications shall take precedence.
Product Family SKU Warranty Length Endurance
U110 Half Slim SATA
SSDs
SDSA6AM-008G
SDSA6AM-016G
SDSA6AM-032G
One (1) year See
Specifications
U110 mSATA SSDs SDSA6DM-016G
SDSA6DM-024G
SDSA6DM-032G
One (1) year See
Specifications
Extreme Pro SATA SSDs SDSSDXPS-960G-G25
SDSSDXPS-480G-G25
SDSSDXPS-240G-G25
Ten (10) years 80 TBW
Solid State Drive SSDs SDSSDP-128G-G25
SDSSDP-064G-G25
Three (3) years See
Specifications
U110 2.5" SSDs SDSA6GM-032G
SDSA6GM-064G-1022
SDSA6GM-064G-1122
SDSA6GM-128G-1022
SDSA6GM-128G-1122
Three (3) years See
Specifications
U110 mini mSATA SSDs SDSA6FM-016G
SDSA6FM-024G
SDSA6FM-032G
One (1) year See
Specifications
U110 m.2 SSDs SDSA6MM-008G One (1) year See
SDSA6MM-016G
SDSA6MM-024G
SDSA6MM-032G
SDSA6PM-064G
SDSA6PM-128G
Specifications
Ultra II SATA SSDs SDSSDHII-960G-G25
SDSSDHII-480G-G25
SDSSDHII-240G-G25
SDSSDHII-120G-G25
Three (3) years 80 TBW
X110 mSATA SSDs SD6SF1M-256G-1022
SD6SF1M-256G-1022I
SD6SF1M-128G-1022
SD6SF1M-128G-1022I
SD6SF1M-064G-1022
SD6SF1M-064G-1022I
SD6SF1M-032G-1022
SD6SF1M-032G-1022I
Five (5) years See
Specifications
X110 2.5" SSDs SD6SB1M-064-1022I
SD6SB1M-064G-1022
SD6SB1M-128-1022I
SD6SB1M-128G-1022
SD6SB1M-256-1022I
SD6SB1M-256G-1022
Five (5) years See
Specifications
SD6SB1M-064G
SD6SB1M-128G
SD6SB1M-256G
One (1) year See
Specifications
X210 2.5" SSDs SD6SB2M-128G-1022I
SD6SB2M-256G-1022I
SD6SB2M-512G-1022
Five (5) years 80 TBW
X210 SATA 2.5" SD6SB2M-128G
SD6SB2M-256G
SD6SB2M-512G
One (1) year 80 TBW
X300s 2.5" SSDs SD7SB3Q-064G-1022I
SD7SB3Q-064G-1022
SD7SN3Q-064G-1122
SD7UB2Q-010T-1022
SD7UB2Q-010T-1122
SD7UB2Q-512G-1022
SD7UB2Q-512G-1122
SD7UB3Q-128G-1022
SD7UB3Q-128G-1122
SD7UB3Q-256G-1022
SD7UB3Q-256G-1122
SD7UN3Q-128G-1022
SD7UN3Q-256G-1022
SD7UN3Q-512G-1122
Five (5) years 80 TBW
X300s SATA 2.5" SSDs SD7SB2Q-010T
SD7SB2Q-512G
SD7SB3Q-064G
SD7SB3Q-128G
SD7SB3Q-256G
SD7UB2Q-512G
SD7UB3Q-128G
SD7UB3Q-256G
Three (3) years 80 TBW
X300s M.2 SSDs SD7SN3Q-064G
SD7SN3Q-128G
SD7SN3Q-256G
SD7SN3Q-512G
SD7UN3Q-128G
SD7UN3Q-256G
SD7UN3Q-512G
Three (3) years 80 TBW
X300 2.5" SSDs SD7SB6S-128G
SD7SB6S-256G
SD7SB7S-010T
SD7SB7S-512G
Three (3) years 80 TBW
SD7UB6S-128G
SD7UB6S-256G
SD7UB7S-512G
SD7SB7S-960G
SD7SB6S-128G-1122
SD7SB6S-256G-1122
SD7SB7S-010T-1122
SD7SB7S-512G-1122
SD7SF6S-128G-1122
SD7SF6S-256G-1122
Three (3) years 80 TBW
X300 M.2 2280 SSDs SD7SN6S-128G
SD7SN6S-256G
SD7SN6S-512G
SD7UN6S-128G
SD7UN6S-256G
SD7UN6S-512G
Three (3) years 80 TBW
X300 mSATA SSDs SD7SF6S-128G
SD7SF6S-256G
Three (3) years 80 TBW
SD7SF6S-512G-1122 Five (5) years 80 TBW
X400 2.5" SSDs SD8SB8U-1T00-1122
SD8TB8U-1T00-1122
Five (5) years 320 TBW
SD8SB8U-512G-1122
SD8TB8U-512G-1122
Five (5) years 160 TBW
SD8SB8U-256G-1122
SD8TB8U-256G-1122
Five (5) years 80 TBW
SD8SB8U-128G-1122 Five (5) years 72 TBW
X400 M.2 2280 SSDs SD8SN8U-1T00-1122 Five (5) years 320 TBW
SD8SN8U-512G-1122 Five (5) years 160 TBW
SD8SN8U-256G-1122 Five (5) years 80 TBW
SD8SN8U-128G-1122
SD8TB8U-128G-1122
Five (5) years 72 TBW
Z400s 2.5" SSDs SD8SBAT-256G-1122
SD8SBAT-128G
SD8SBAT-128G-1122
Five (5) years 72 TBW
SD8SBAT-064G
SD8SBAT-064G-1122
Five (5) years 40 TBW
SD8SBAT-032G
SD8SBAT-032G-1122
Five (5) years 20 TBW
Z400s mSATA SSDs SD8SFAT-128G
SD8SFAT-128G-1122
Five (5) years 72 TBW
SD8SFAT-064G
SD8SFAT-064G-1122
Five (5) years 40 TBW
SD8SFAT-032G
SD8SFAT-032G-1122
Five (5) years 20 TBW
Z400s M.2 2280 SSDs SD8SNAT-256G
SD8SNAT-256G-1122
SD8SNAT-128G
SD8SNAT-128G-1122
Five (5) years 72 TBW
SD8SNAT-064G
SD8SNAT-064G-1122
Five (5) years 40 TBW
Z400s M.2 2242 SSDs SD8SMAT-128G
SD8SMAT-128G-1122
Five (5) years 72 TBW
SD8SMAT-064G
SD8SMAT-064G-1122
Five (5) years 40 TBW
SD8SMAT-032G
SD8SMAT-032G-1122
Five (5) years 20 TBW
Z410 2.5" SSDs SD8SBBU-120G-1122 Three (3) years 40 TBW
SD8SBBU-240G-1122 Three (3) years 80 TBW
SD8SBBU-480G-1122 Three (3) years 120 TBW
Any Other Non-
Customized Commercially
Available SanDisk® SSD
XXXXXXXXXXXXXX One (1) year See
Specifications
For the following group of products, The Warranty Period expires at the end of the earlier of (a) the stated time
period for the Product identified below or (b) the point at which Customer’s use of the product exceeds the stated
maximum endurance limit, which shall be measured by calculating the Product’s average drive writes per day
(DWPD) during the projected warranty length of the Product as stated in the table below.
Product Family SKU Warranty Length Endurance
Optimus Extreme™ SAS
SSDs
SDLKOE9W-100G-5CA1
SDLKOD9W-200G-5CA1
SDLKOC9W-400G-5CA1
SDLLOC9W-800G-5CA1
Five (5) years 45 DWPD
Optimus Ultra™ SAS SSDs SDLKOEGW-150G-5CA1
SDLKODGW-300G-5CA1
SDLKOCGW-600G-5CA1
SDLLOCGW-012T-5CA1
Five (5) years 30 DWPD
Optimus Ascend™ SAS SSDs SDLKOEDM-200G-5CA1
SDLKODDM-400G-5CA1
SDLKOCDM-800G-5CA1
SDLLOCDM-016T-5CA1
Five (5) years 10 DWPD
Optimus Ascend™ SAS SSDs
- Recertified Product
SDLKOEDM-200G-5CRC
SDLKODDM-400G-5CRC
SDLKOCDM-800G-5CRC
SDLLOCDM-016T-5CRC
Three (3) years 10 DWPD
SDLKOEDM-200G-5CRZ
SDLKODDM-400G-5CRZ
SDLKOCDM-800G-5CRZ
SDLLOCDM-016T-5CRZ
One (1) year 10 DWPD
Optimus Eco™ SAS SSDs SDLKOD6R-400G-5CA1
SDLKOC6R-800G-5CA1
SDLLOC6R-016T-5CA1
Five (5) years 3 DWPD
SDLLOC6R-020T-5CA1 Five (5) years 1 DWPD
Optimus MAX™ SAS SSD SDLLOCDR-038T-5CA3
SDLLOCDR-038T-5CA1
Five (5) years 0.5 DWPD
Optimus MAX™ SAS SSD -
Recertified Product
SDLLOCDR-038T-5CRC Three (3) years 0.5 DWPD
SDLLOCDR-038T-5CRZ One (1) Year 0.5 DWPD
Lightning Ultra™ Gen. II SAS
SSDs
SDLTMDKW-200G-5CA1
SDLTMDKW-400G-5CA1
SDLTMCKW-800G-5CA1
Five (5) years 25 DWPD
Lightning Ascend™ Gen. II
SAS SSDs
SDLTODKM-200G-5CA1
SDLTODKM-400G-5CA1
SDLTODKM-800G-5CA1
SDLTOCKM-016T-5CA1
Five (5) years 10 DWPD
Lightning Eco™ Gen. II SAS
SSDs
SDLTODKR-800G-5CA1
SDLTOCKR-016T-5CA1
Five (5) years 3 DWPD
Lightning® Write-Intensive
SAS SSDs
SDLB6HS-200GC-00
SDLB6HS-400GC-00
Five (5) years 25 DWPD
Lightning Mixed-Use SAS
SSDs
SDLB6HM-200GC-00
SDLB6HM-400GC-00
SDLB6HM-800GC-00
Five (5) years 10 DWPD
Lightning Read-Intensive
SAS SSDs
SDLB6JC-400GC-00
SDLB6JC-800GC-00
SDLB6JC-016TC-00
Three (3) years 1 DWPD
CloudSpeed Ultra™ SATA
SSDs
SDLFOEAM-100G-1HA1
SDLFODAM-200G-1HA1
SDLFODAM-400G-1HA1
SDLFOCAM-800G-1HA1
Five (5) years 3 DWPD
CloudSpeed Ascend™ SATA
SSDs
SDLFOEAR-120G-1HA1
SDLFODAR-240G-1HA1
SDLFODAR-480G-1HA1
SDLFOCAR-960G-1HA1
Five (5) years 1 DWPD
CloudSpeed Ascend™ SATA
SSDs - Recertified Product
SDLFOEAR-120G-1HA1
SDLFODAR-240G-1HA1
SDLFODAR-480G-1HA1
SDLFOCAR-960G-1HA1
Three (3) years 1 DWPD
CloudSpeed Eco™ SATA
SSDs
SDLFNDAR-240G-1HA2
SDLFNDAR-480G-1HA2
SDLFNCAR-960G-1HA2
Three (3) years 1 DWPD
CloudSpeed Eco Gen. II™ SDLF1DAR-480GC-1HA1 Three (3) years 1 DWPD
SSDs SDLF1DAR-960GC-1HA1
SDLF1CRR-019TC-1HA1
ULLtraDIMM™ DDR3 SSDs SDLOODFM-200G-6KB1
SDLOOCFM-400G-6KB1
Five (5) years 10 DWPD
For the following group of PCIe products, the Warranty Period expires at the end of the earlier of (a) the stated
time period for the Product identified below or (b) the point at which Customer’s use of the product exceeds the
stated maximum endurance limit, which shall be measured by calculating the Product’s total Petabytes Written
(PBW) for normal use during the projected warranty length of the Product as stated in the table below. For users
implementing solutions with multiple products, the endurance ratings assume uniform distribution of writes across
all products.
Product Family SKU Warranty Length Endurance
ioFX 420GB SDFABAMOF-420G-SF1 Five (5) years 2 PBW
ioFX2 1.6TB SDFABAMOF-1T65-SF1 Five (5) years 8 PBW
ioFX2 410 GB SDFABAMOF-410G-SF1 Five (5) years 2 PBW
Fusion ioMemory SX300-
1300
SDFACAMOS-1T30-SF1 Five (5) years 4 PBW
Fusion ioMemory SX300-
1600
SDFACAMOS-1T60-SF1 Five (5) years 5.5 PBW
Fusion ioMemory SX300-
3200
SDFACAMOS-3T20-SF1 Five (5) years 11 PBW
Fusion ioMemory SX300-
6400
SDFACCMOS-6T40-SF1 Five (5) years 22 PBW
Fusion ioMemory SX350-
1300
SDFADAMOS-1T30-SF1 Five (5) years 4 PBW
Fusion ioMemory SX350-
1600
SDFADAMOS-1T60-SF1 Five (5) years 5.5 PBW
Fusion ioMemory SX350-
3200
SDFADAMOS-3T20-SF1 Five (5) years 11 PBW
Fusion ioMemory SX350-
6400
SDFADCMOS-6T40-SF1 Five (5) years 22 PBW
Fusion ioMemory PX600-
1000
SDFACAMOP-1T00-SF1 Five (5) years 12 PBW
Fusion ioMemory PX600-
1300
SDFACAMOP-1T30-SF1 Five (5) years 16 PBW
Fusion ioMemory PX600-
2600
SDFACAMOP-2T60-SF1 Five (5) years 32 PBW
Fusion ioMemory PX600-
5200
SDFACCMOP-5T20-SF1 Five (5) years 64 PBW
Appliance Warranty Information
For the following group of InfiniFlash products, the Warranty Period for the chassis expires at the end of the stated
time period for the Product identified below. For the InfiniFlash Card, the Warranty Period expires at the end of
the earlier of (a) the stated time period for the Product identified below or (b) the point at which Customer’s use of
the product exceeds the stated maximum endurance limit, which shall be measured by calculating the Product’s
total Petabytes Written (PBW) for normal use during the projected warranty length of the Product as stated in the
table below. The endurance ratings assume uniform distribution of writes across all InfiniFlash Cards.
Product Family System Level SKU Warranty
Length
InfiniFlash
Card
Endurance
Appliance
Endurance*
InfiniFlash 100/500/700
Series
SDIF100-2YXXXXXX Three (3)
years
35 PBW 2.3 EBW
InfiniFlash 150/550/750
Series (8 TB BSSD)
SDIF150-2Y8XXXX Three (3)
years
35 PBW 2.3 EBW
InfiniFlash 150/550/750
Series (4 TB BSSD)
SDIF150-2Y4XXXX Three (3)
years
17.5 PBW 1.2 EBW
* Appliance Endurance ratings are calculated by extrapolating the Exabytes written (EBW) across sixty‐four
InfiniFlash Cards under normal use with a uniform distribution of writes over the length of the warranty.This
information is provided for informational purposes only and is not a metric by which the Warranty Period is
measured.
If your Product is purchased from an OEM, and your Product’s SKU is not present on any table in this Warranty,
contact your OEM to determine the warranty length on your Product.
G. Product Datasheets & Specification
The product datasheets and specifications for the Products can be found on sandisk.com. If the datasheet and
specifications for the Product cannot be found on sandisk.com, please contact SanDisk® Customer Service to
obtain a copy of the documents.
Please direct all questions concerning use of this warranty to: Western Digital Technologies, Inc., 951 SanDisk
Drive, Milpitas, CA 95035; Attention: Commercial Legal Department.
Version 07.2016

#SANDISKSTORIES
Submit your photos and take part in the storytelling
experience. Just tag your photos with #sandiskstories on
Twitter and Instagram. Learn More »
Site Menu
For Home
For Business
OEM Design
Media Center
Careers
Investor Relations
Contact Us
Retail Support
Quick Assist
Ask a question
Chat with experts (USA
only)
Register your product
RMA Request
Check RMA Status
Forums
Next Event:
Mobile World Congress 2017
February 27 March 02 |Barcelona, Spain
Learn More » All Events »
Next Event:
Embedded World 2017
March 14 March 16 |Nuremberg, Germany
Learn More » All Events »
Legal Terms of Use Trademarks Privacy About Ads & Cookies California Supply Chains Act Your CA Privacy Rights
© 2016 Western Digital Corporation or its affiliates. All rights reserved. Western Digital Technologies, Inc. is the seller of record and licensee in the Americas of SanDisk® products.