ZB5AA73134 Product data sheet Characteristics green flush/red projecting/green flush tripleheaded pushbutton O22 with marking Product availability : Non-Stock - Not normally stocked in distribution facility Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications Price* : 57.00 USD Main Range of product Harmony XB5 Product or component type Head for triple-headed push-button Device short name XB5 Bezel material Dark grey plastic Mounting diameter 0.87in (22mm) Head type Standard Shape of signaling unit head Rectangular Type of operator spring return Operator profile 2 flush - 1 central projecting STOP push-buttons Operators description Green ''up arrow'' - green ''down arrow'' - red ''STOP'' Complementary CAD overall width 1.18in (30mm) CAD overall height 1.97in (50mm) CAD overall depth 1.38in (35mm) Net Weight 0.05lb(US) (0.023kg) Resistance to high pressure washer 1015.26psi (7000000Pa) 131F (55C) 0.1 m Colour of marking Black marking when white caps White marking when green, red or black caps Operator profile Red projecting, STOP white) Green flush, down arrow white) Green flush, up arrow white) Mechanical durability 1000000cycles Station name XALD 1 cut-out Electrical composition code C1 9 single front mounting C2 9 single and double front mounting *Price is "List Price" and may be subject to a trade discount - check with your local distributor or retailer for actual price. Oct 31, 2020 1 C11 3 single front mounting SF1 3 single front mounting SR1 3 single rear mounting Device presentation Basic element Environment Ambient air temperature for storage -40...158F (-40...70C) Ambient air temperature for operation -13...158F (-25...70C) Electrical shock protection class Class II IEC 61140 IP degree of protection IP67 IEC 60529 IP69 IEC 60529 IP69K NEMA degree of protection NEMA 13 NEMA 4X IK degree of protection IK05 IEC 50102 Standards CSA C22.2 No 14 EN/IEC 60947-5-1 UL 508 JIS C8201-5-1 EN/IEC 60947-1 EN/IEC 60947-5-4 JIS C8201-1 Product certifications GL BV LROS (Lloyds register of shipping) CSA UL Listed RINA DNV Vibration resistance 5 gn 2...500Hz)IEC 60068-2-6 Shock resistance 30 gn 18ms) half sine wave acceleration IEC 60068-2-27 50 gn 11ms) half sine wave acceleration IEC 60068-2-27 Ordering and shipping details Category 22467 - PUSHBUTTONS,22MM(PLASTIC) NEW Discount Schedule CS2 GTIN 03389119043441 Package weight(Lbs) 0.05lb(US) (0.02kg) Returnability No Country of origin FR Offer Sustainability Sustainable offer status Green Premium product California proposition 65 WARNING: This product can expose you to chemicals including: Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov REACh Regulation REACh Declaration REACh free of SVHC Yes EU RoHS Directive Pro-active compliance (Product out of EU RoHS legal scope) EU RoHS Declaration Toxic heavy metal free Yes Mercury free Yes RoHS exemption information Yes China RoHS Regulation China RoHS declaration Environmental Disclosure Product Environmental Profile Circularity Profile End of Life Information 2 Contractual warranty Warranty 18 months 3 Product data sheet Dimensions Drawings Dimensions Without Boot With Boot ZBA709 4 ZB5AA73134 Product data sheet Mounting and Clearance ZB5AA73134 Panel Cut-out for Pushbuttons, Switches and Pilot Lights (Finished Holes, Ready for Installation) Connection by Screw Clamp Terminals or Plug-in Connectors or on Printed Circuit Board (1) (2) (3) Diameter on finished panel or support For selector switches and Emergency stop buttons, use of an anti-rotation plate type ZB5AZ902 is recommended. +0.4 +0.016 O22.5mm recommended (O22.3 0 ) / O0.89in. recommended (O0.88in. 0 ) Connections a in mm a in in. b in mm b in in. By screw clamp terminals or plug-in connector 40 1.57 30 1.18 By Faston connectors 45 1.77 32 1.26 On printed circuit board 30 1.18 30 1.18 Detail of Lug Recess (1) (2) (3) Diameter on finished panel or support For selector switches and Emergency stop buttons, use of an anti-rotation plate type ZB5AZ902 is recommended. +0.4 +0.016 O22.5mm recommended (O22.3 0 ) / O0.89in. recommended (O0.88in. 0 ) 5 Product data sheet Mounting and Clearance ZB5AA73134 Pushbuttons, Switches and Pilot Lights for Printed Circuit Board Connection Panel Cut-outs (Viewed from Installer's Side) A: B: 30mm min. / 1.18in. min. 40mm min. / 1.57in. min. Printed Circuit Board Cut-outs (Viewed from Electrical Block Side) Dimensions in mm A: B: 30mm min. 40mm min. 6 Dimensions in in. A: B: 1.18in. min. 1.57in. min. General Tolerances of the Panel and Printed Circuit Board The cumulative tolerance must not exceed 0.3mm / 0.012in.: T1 + T2 = 0.3mm max. Installation Precautions Minimum thickness of circuit board: 1.6mm / 0.06in. Cut-out diameter: 22.4mm 0.1 / 0.88in. 0.004 Orientation of body/fixing collar ZB5AZ009: 230' (excluding cut-outs marked a and b). Tightening torque of screws ZBZ006: 0.6N.m (5.3lbf.in) max. Allow for one ZB5AZ079 fixing collar/pillar and its fixing screws: every 90mm / 3.54in. horizontally (X), and 120mm / 4.72in. vertically (Y). with each selector switch head (ZB5AD*, ZB5AJ*, ZB5AG*). The fixing centers marked a and b are diagonally opposed and must align with those marked 4 and 5. (1) (2) (2) (4) Head ZB5AD* Panel Nut Printed circuit board 7 Mounting of Adapter (Socket) ZBZ01* 1 2 elongated holes for ZBZ006 screw access 2 1 hole O 2.4mm 0.05 / 0.09in. 0.002 for centring adapter ZBZ01* 3 8 x O 1.2mm / 0.05in. holes 4 1 hole O 2.9mm 0.05 / 0.11in. 0.002, for aligning the printed circuit board (with cut-out marked a) 5 1 elongated hole for aligning the printed circuit board (with cut-out marked b) 6 4 holes O 2.4mm / 0.09in. for clipping in adapter ZBZ01* Dimensions An + 18.1 relate to the O 2.4mm 0.05 / 0.09in. 0.002 holes for centring adapter ZBZ01*. 8 Product data sheet Technical Description ZB5AA73134 Electrical Composition Corresponding to Code C1 9 Product data sheet Technical Description ZB5AA73134 Electrical Composition Corresponding to Code C2 10 Product data sheet Technical Description ZB5AA73134 Electrical Composition Corresponding to Codes C9, C11, SF1 and SR1 11 Product data sheet Technical Description Legend Single contact Double contact Light block Possible location 12 ZB5AA73134