KG series Power rocker switches Distinctive features and specifications Illuminated or non-illuminated Protected rocker Sealed to IP 65 Laser marking VDE (EN 61058-1) approved ELECTRICAL SPECIFICATIONS D MATERIALS * Currrent/voltage rating : - functions 1 (ON-OFF) and 6 (ON-ON) : 15A 12VDC, 10A 24VDC, 15A 250VAC max., 10mA 14VDC min. - functions 4 ( ON ON ON) and 4-1R (ON ON MOM) : 8A 12VDC, 5A 24VDC, 8A 250VAC max. - other functions : 10A 12VDC, 8A 24VDC, 10A 250VAC max. * VDE approved ratings : 12(4)A 250VAC, T85/55C * Initial contact resistance : 10 m max. at 1A 2VDC * Insulation resistance : 1.000 M min. at 500VDC * Dielectric strength : 2.000 Vrms 50 Hz min. between terminals * Electrical life : 10.000 cycles min. * Mechanical life : 2 position models : 100.000 cycles min. 3 position models : 30.000 cycles min. ENVIRONMENTAL SPECIFICATIONS * Degree of protection : IP 65 * Shock resistance : 100 g according to IEC 512-4, test 6c * Vibration resistance : 10-500 Hz - 10 g according to IEC 512-4, test 6d * Salt spray resistance : 96 hours according to IEC 512-6, test 11f * Moisture resistance : 56 days according to IEC 68-2-3 * Operating temperature : 2 position models : -40C to + 85C 3 position models : -10C to + 65C * Case and bezel : thermoplastic UL94-V0 * Terminals : brass, silver plated * Contacts : silver grain * Contact roller : brass, nickel plated REAR PROTECTION OR SEALING The KG switches are also available with wire lead terminals (lead 16AWG max.) : * Models with protection cover, as shown on photo below, * Models with rear sealing provided by the overmoulding of terminals in a resin base. On request. MATRIX MOUNTING 25.00 mini. (.984 min.) 4.00 (.157) 49.00 mini. (1.929 min.) 12.20 (.480) AGENCY APPROVAL EN 61058-1 Availability : double pole models, functions ON-OFF and ON-ON. Marking : to order switches marked VDE, add "VDE" at the end of model number. Dimensions : First dimensions are in mm while inches are shown as bracketed numbers. Packaging unit : 40 pieces D-44 www.apem.com APEM KG series Power rocker switches Case 21.08 (.830) PANEL CUT-OUT 36.80 (1.449) Panel thickness : 0,8 mm to 4,6 mm Recommended thickness : between 2 mm and 3,5 mm 3 2 1 CASE + LAMPS ROCKER LENS MARKING MODEL STRUCTURE OFF ON ON ON MOM ON ON OFF MOM OFF MOM OFF ON 10.50 (.413) 23.50 (.925) 20.00 (.787) 12.00 (.472) 48.50 (1.909) D 43.70 (1.720) ON ON ON MOM ON MOM ON ON 6.85 (.269) KG35 KG36 KG37 KG38 KG39 Double pole KG41 KG44* KG44-1R* KG45 KG46 KG47 KG48 KG49 14.65 (.576) Single pole KG31 1-2 4-5 24.50 (.964) 2-3 5-6 11.00 (.433) Flat seal * Function 4 : single pole in double pole case TERMINALS Side A O3.00x0.50 SI (.118DIAx0.50 IS) o1.50 (.059DIA) O3.10 (.122DIA) 6.35 (.25) 0.80 (.031) 2 0 Screw 4.50 (.177) Terminals 1 to 6 are marked on the case. 6.35x0.80 (.250x.031) 6.35x0.80 (.25x.031) Solder lug / quick-connect Side A : terminals 1 and 4 Side B : terminals 3 and 6 3 1 4 2 5 3 6 Quick-connect Side B CONTACT MATERIALS A APEM Silver grain Functions ON-OFF and ON-ON : 15A 12VDC , 10A 24VDC, 15A 250VAC max. - 10mA 14 VDC min. Other functions : 10A 12VDC, 8A 24VDC, 10A 250VAC max. www.apem.com D-45 KG series Power rocker switches Lamps BEZEL Black, sealed to IP 65 2 LAMPS Side A Side B Complete each enlarged box with one of the codes listed below. D X Without lamp J 24V LED red A 6V LED red K 24V LED green B 6V LED green L 24V LED yellow C 6V LED yellow M Neon 125V D 12V LED red N Neon 250V E 12V LED green O Filament 6V F 12V LED yellow P Filament 12V G 18V LED red R Filament 24V H 18V LED green S Fluorescent 220V I 18V LED yellow T Fluorescent 110V Side A 4 1 4 1 4 1 4 1 5 2 5 2 5 2 5 2 6 3 6 3 6 3 6 3 Side B The lamp wiring diagram is shown on the case. LAMP WIRING 1 4 + 1 2 5 2 3 6 3 A (standard) 4 1 - 5 6 + 1 4 2 5 3 6 2 - 3 1 4 5 6 4 2 5 3 6 1 - + 2 + - 3 4 + 2 5 6 B 1 1 4 5 3 6 1 4 - + 4 2 5 3 6 - C 1 2 4 5 3 6 + - D - for function 1 (on-off) with lamp on side A 2 5 3 6 - + 1 4 2 + - 3 5 6 E To order case only (without rocker), finish your order number with the lamp wiring code. D-46 www.apem.com APEM KG series Power rocker switches Rockers - lenses ROCKER COLOUR 1 Blue 5 Yellow Dark blue 6 Red 2 Black 7 Ivory 3 Green 9 Orange 4 Grey 1/4 ROCKER SHAPE D 1 Full rocker 4 Opening on side A 6 Opening on side B 8 Opening on sides A and B Other rocker shapes on customer specifications : on request. To order rocker only (without case), begin the order number with code KGR, then follow the order format from "rocker colour" until the end of the options. LENS COLOUR Side A Side B Complete each enlarged box with one of the codes listed below. X No lens 1 Blue * 3 Green * 6 Red 9 Orange B White T Translucent Side A 4 1 4 1 5 2 5 2 6 3 6 3 Side B * Blue or green lens recommended with fluorescent lamp. To order lenses only, begin the order number with the codes : KGLA for lens A and KGLB for lens B, then follow the order format from "lens colour" until the end of the options. APEM www.apem.com D-47 KG series Power rocker switches Marking If no marking required, leave all boxes blank. MARKING * * MARKING ORIENTATION Select one option from each of the tables below. 4 1 5 2 6 3 1 2 3 4 5 6 MARKING METHOD L Laser (on request) C Hot stamping V Other orientations : on request H SYMBOLS M A B White marking for black rockers - Black marking for colour rockers - Other : on request. Marking in M area : on request. D CODE SYMBOL DESCRIPTION CODE SYMBOL DESCRIPTION A 4 1 5 2 6 3 XX None - 10 Down motion 01 ON - 11 Hot 02 OFF - 12 Cold 20 03 - 13 Hazard lights 21 04 - 14 Traveller lighting 22 Windshield washer 05 - 15 Driver lighting 23 Ventilator M B 2 1 2 1 Windshield demister/defroster Windshield wiper 06 STOP - 16 Revolving light 24 Side mirror defroster 07 A Stop 17 Rear ventilator 25 Restarting pump 08 M Motion 18 Heating 26 Front fog lights Up motion 19 Door opening 27 Rear fog lights 09 D-48 www.apem.com APEM