MICRODOT and NANONICS Connectors
Tyco Electronics Corporation
Harrisburg, Pennsylvania
www.tycoelectronics.com
1308638 10M GIC CGX 8-05
MICRODOT and
NANONICS Connectors
MICRODOT and NANONICS Connectors
© Copyright 2001 and 2005 by
Tyco Electronics Corporation.
All Rights Reserved.
COMBOMATE, DUALOBE, JACKMATE,
LEPRA/CON, MARC 53, MARC 63,
MARC 73, MICRODOT,NANONICS,
and TYCO aretrademarks.
Other products, logos, and Company
names mentioned herein may be
trademarks of their respective owners.
Disclaimer
While Tyco Electronics has made every
reasonable effort to ensure the accuracy
of the information in this catalog, Tyco
Electronics does not guarantee that it is
error-free, nor does Tyco Electronics make
any other representation, warranty, or
guarantee that the information is accurate,
correct, reliable or current. Tyco
Electronics reserves the right to make any
adjustments to the information contained
herein at any time without notice. Tyco
Electronic expressly disclaims all implied
warranties regarding the information
contained herein, including but not limited
to any implied warranties or merchantabili-
ty or fitness for a particular purpose.
It is recommended that you test any new
or replacement product before incorporat-
ing into a system.
The dimensions in this catalog are for
reference purposes only and are subject to
change without notice. Dimensions are in
inches over [millimeters], unless other-
wise specified. Always consult our
customer drawings for recommended PC
board layout and panel cutout dimensions;
do not use catalog dimensions.
Specifications aresubject to change with-
out notice.
Consult Tyco Electronics at 1-800-522-
6752 for latest dimensions and design
specifications, or use our global contact
list shown on inside back cover.
MICRODOT ConnectorsNANONICS Connectors
MICRODOT and NANONICS Connectors
i
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Main Table of Contents
i
DUALOBE Rectangular Connectors . . . . . . . . . . . . . . . . . . . . 141-178
Circular Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179-196
Coaxial Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197-206
Strip Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207-214
Part Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215-218
Microminiature D Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . 5-35
Rectangular Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37-54
Circular Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55-90
Coaxial Connectors................................91-136
MICRODOTNANONICS
MICRODOT and NANONICS Connectors
Engineering Notes
ii Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
ii
MICRODOT Connectors
Table of Contents
1
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Microdot Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Microminiature D Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-35
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
MCK/MCD/MCDM Series Metal and Plastic Shell Connectors. . . . . . . . . . . . . . . . . . . . . . 6
How To Specify MCK and MCD Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Contact Arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
MCK Series Metal Shell Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
MCK Series Metal Shell Connectors Panel Mounting — Cutout Dimensions . . . . . . . . . . 10
MCD Series Plastic Shell Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11, 12
MCD Series Plastic Shell Connectors Panel Mounting — Cutout Dimensions . . . . . . . . . 13
Mounting and Coupling Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 15
MCK Transition Blocks
RT1 — Right Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-18
ST1 — Straight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-21
MCK ST2 Series Straight Mount PCB Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . 22-24
MCDM Series Metal Shell Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 26
MCDM Series Metal Shell RF COMBOMATE Connectors . . . . . . . . . . . . . . . . . . . . . . 27-29
MCDM Series Metal Shell Connectors Panel Mounting — Cutout Dimensions . . . . . . . . 30
MIL-DTL-83513 Cross Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31-35
Rectangular Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37-54
Introduction .............................................................37
TWIST Pin Contact Data ..................................................38
MCE Plastic
MCE Series Plastic Shell EdgeboardConnectors...........................39-41
Technical & Performance Data...........................................39
Mother Board & Daughter Board Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
How To Specify. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
MCEM Metal Shell
MCEM Series Metal Shell EdgeboardConnectors ..........................42-45
Performance Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
128 Layout Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43, 44
How ToSpecify.......................................................44
184 Layout Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
MCJ Plastic
MCJ Series Plastic Shell Center Jackscrew Connectors . . . . . . . . . . . . . . . . . . . . . 46, 47
10 & 14 Layout Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
26, 38 & 46 Layout Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
How ToSpecify.......................................................47
Contact Arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
MCJM Metal Shell
MCJM Series Metal Shell Center Jackscrew Connectors. . . . . . . . . . . . . . . . . . 46, 48, 49
Technical & Performance Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Plug & Receptacle Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 49
How To Specify. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
MICRODOT Connectors
Table of Contents (Continued)
2Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
MCS .050 [1.27] Centerline
MCS Series Strip Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Strip Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
How To Specify. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
High Density Standard Module (HDSM) Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . 51-54
Circular Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57-92
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55, 56
MARC 43
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Materials and Finishes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Service & Performance Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Test Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Contact Arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Part Number & Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Polarizing Key Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Shell Configurations..................................................60-62
Cable Clamps, Contacts, Sealing Plugs,
Protective Covers & Modifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
MARC 53
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Materials and Finishes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Service & Performance Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Test Data.............................................................66
Contact Arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Part Number & Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Polarizing Key Positions .................................................68
Shell Configurations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69-71
Test Adapters, Protective Covers, Cable Clamps
&Modifications....................................................72, 73
MARC 63
Performance Data......................................................74
PartNumber & Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Shell Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75, 76
Cable Clamps, Protective Covers & Modifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
MARC 43, 53, 63
Contacts & Sealing Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78-80
MARC 43, 53, 63, 73
Assembly Tools........................................................81
MARC 73
Service & Performance Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82, 83
PartNumber & Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Shell Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84, 85
Cable Clamps, Contacts & Sealing Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85, 86
MQR Series – MicrominiatureCircular Connectors...........................87, 88
MTC Series – Microminiature Circular Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . 89, 90
MICRODOT Connectors
Table of Contents (Continued)
3
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Coaxial Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91-136
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Standard Coaxial Connectors
Performance Data/Materials. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Screw-On Series (S) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93-98
Slide-On Series (SOS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99-102
Quick-Connect Series (QC). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103-105
Twinax Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Triax Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Terminals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Module Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Caps For Screw-On Jacks and Receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Feed Thru Adapters, Screw-On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
BNC/TNC Adapters to:
Screw-On Series (S). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110, 111
Slide-On Series (SOS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Quick-Connect (QC). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Gold Plated Crimp Style Coaxial Connectors
Performance Data/Materials. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Screw-On Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113-116
Assembly Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
LEPRA/CON Ultra MiniatureConnectors
Performance Data/Materials.............................................117
Screw-On Series — Standard Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118, 119
Screw-On Series — Locking Interface .................................120, 121
Slide-On Series...................................................122, 123
Assembly Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
BNC / LEPRA/CON Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124, 125
Snap-Lock Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Cable Assemblies
Ordering Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Mating Interface Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Cable Acceptance Dimensions
Standard Coaxial Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129-133
Gold Plated Crimp Style Coaxial Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . 133, 134
LEPRA/CON Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Hermetic Connectors
Coaxial Screw-On, Slide-On Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135, 136
MICRODOT Connectors
MICRODOT Introduction
4Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
MICRODOT Connector
products have a fifty-year
heritage of leadership in
precision design and manu-
facturing of innovative and
cost-effective interconnects.
These innovative and cost-
effective products offer
interconnect solutions for a
broad range of applications
in the Aerospace, Military,
Medical, Instrumentation,
Communications and
Computer markets.
The MICRODOT reputation
for hands-on experienc
and outstanding technical
support is now enhanced
as part of Tyco Electronics
Corporation.
From standard Mil-Spec
configurations to custom
designs, we have the
Micro-D, subminiature and
ultra-miniature coaxial,
custom hermetic and
space-related cylindrical
connectors to meet your
need, whether it is build-to-
print assemblies, or total
turn-key assembly program
management. MICRODOT
connectors have met the
rigorous demands imposed
in manned space flight,
military and commercial
satellites, critical medical
applications, and geo-
physical exploration.
Microminiature D Connectors
Microminiature D Connectors
5
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Microminiature D
Connectors
1
MICRODOT Connectors
MCK and MCD High Density
Microminiature “D”
Connectors described in
this catalog comprise a
complete connector sys-
tem, which is adaptable to
anumerous variety of form
factors. Low engaging force
is achieved by the manner
in which the twist pin
contacts are designed.
By constructing the male
contact as a breathing
helical spring, electrical
contact is achieved at many
points around the periphery
of the pin bundle rather
than at a few discrete
points, as in conventional
pin designs. Normal twist
pin engagement force is
6oz. [1.67N] typically and
8oz. [2.22N] maximum. The
low force twist pins exhibit
an engaging force of 4 oz.
[1.11N] typically and 5 oz.
[1.39N] maximum. Low
force twist pins are standard
in MIL-DTL-83513 configu-
rations of MCK and MCD
connectors and may be
supplied as an option in all
other configurations.
The MCK and MCD Series
of connectors featured in
this catalog aredesigned to
meet the applicable require-
ments of MlL-DTL-83513,
for intermateability,inter-
changeability,and
performance. Designed for
both military and commer-
cial applications, the MCK’s
and MCD’s are especially
well suited for use in minia-
turized airborne and space
electronics, computers, and
test equipment. The metal
shell MCK’s and plastic
shell MCD’s are available
with solder cup, and solid or
stranded wire terminations.
MCK transition blocks are
standardfor printed circuit
boardmounting. Custom
termination configurations
for both MCK and MCD
can be accommodated.
Micro D’s are also supplied
in wired harness assemblies.
Product Facts
nDesigned for both military
and commercial applications
nLow engaging force is
achieved by the manner in
which Twist Pin Contacts are
designed
nThe metal shell and plastic
shell are available with
solder cup and solid or
stranded wire terminations
nMating force maximum is
10 oz. [2.78N] times the
number of contacts
nDurability — No known
mechanical or electrical
issues detrimental to the
function of the connectors
after 500 cycles of mating
and unmating
nCurrent Rating — 3 amps
max per contact
Microminiature D Connectors
MCK/MCD/MCDM Series Metal and Plastic Shell Connectors
6Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Electrical
Contacts —Pin 24 AWG twist pin,
Socket 24 AWG precision machined
barrel, Wire Range 24 AWG to 30 AWG
solid and stranded.
Contact Resistance —(voltage drop)
25 millivolts max. at 3 amps, 77°± 7.4°F
[25°± 3° C].
Current Rating —3amps max. per
contact.
Dielectric Withstanding Voltage —
Volts RMS 60 Hz at room ambient.
At sea level 600V solder pots, 750V wire
terminations & transition blocks.
At 70,000 ft. [21,336 m] 150V solder
pots, 200V wire terminations & transi-
tion blocks.
Insulation Resistance —5,000
megohms min. (@ 500 VDC) at ambient
room temperature.
Magnetic Permeability —2mu max.
Mechanical
Contact Spacing —.050 [1.27mm]
centers.
Contact Engagement &
Separation —Standard contact
engaging force is 6.0 oz. [1.67N] (8.0 oz.
[2.22N] max.). Separation force is 0.5
[.14N] oz. min.
Mating Force Maximum —
Calculated as 10 oz. times the number
of contacts.
Environmental
Temperature Range —
-67°F to 257 ° F [ -55°C to +125°C] for
MCK/MCD, -67°F to 302° F [-55°C to
+150°C] for MCDM.
Vibration —No discontinuity in
excess of 1 µ sec. when tested in accor-
dance with MIL-STD-1344, Method
2005, test Condition IV.
Solderability —Connectors shall
pass the test requirements of MIL-STD-
202, Method 208
Shock —No discontinuity in excess of
1µ sec. when tested in accordance with
MIL-STD-1344, Method 2004, test
Condition E.
Durability —No mechanical or electri-
cal defects detrimental to the function of
the connectors after 500 cycles of mat-
ing and unmating.
Humidity —After exposure to humidi-
ty as specified by MIL-STD-1344,
Method 1002, Type II, IR shall be 1
megohm min. following step 7a of
Method 1002 and 1000 megohms min.
after 24 hours of conditioning per
Method 1002.
Salt Spray —Connectors shall meet
the performance requirements of contact
resistance, mating and unmating forces,
and contact retention after being subject-
ed to the 48-hour 5% solution salt spray
test per MIL-STD-1344, Method 1001,
Condition B.
Fluid Immersion —Unmated con-
nectors after being fully immersed in one
of the following fluids, for the prescribed
time, will mate at a force of 10 oz.
[2.78N] times the number of contacts
or less: Perchloroethylene, 2 hours;
Lubricating oil per MIL-L-23699,
20 hours.
Insert Retention — Inserts will with-
stand a 50 lb. [34N/cm2]per square inch
load in either direction.
Crimp Termination Tensile
Strength —(Unassembled contacts
with crimped stranded wire terminations)
Wires will not pull out of contacts when
the following axial loads are applied:
24 AWG, 5 lbs. [22.24N]; 26 AWG,
4lbs. [17.79N]; 28 AWG, 3 lbs.
[13.34N]
Outgassing — When tested in accor-
dance with SP-R-0022, Total Mass Loss
(TML) shall be less than 1.0% and
Volatile Condensable Material (VCM)
shall be less than 0.1% of the original
specimen.
Materials and Finishes
Contacts —Copper alloy plated with
.000050 [.00127] gold over copper flash
per MIL-G-45204 Type II.
Hardware —see pages 14 and 15.
MCK-Metal Shell —
Insulator — Liquid crystal polymer
(LCP) per ASTM D5138, or
Polyphenylene sulfide GST-40F per
ASTM D5927 or MIL-M-24519
Interfacial Seal — Fluorosilicone Rubber
per MIL-R-25988 (socket side only)
Body Shell — Aluminum alloy-high
grade plated
Cadmium per QQ-P-416
Nickel, electroless per AMS 2404
Transition Block Shell —
Liquid crystal polymer (LCP) per ASTM
D5138, or Polyphenylene sulfide
GST-40F per ASTM D5927 or
MIL-M-24519
Potting Material — Epoxy, Black
MCD-Plastic Shell —
Insulator/Body — Polyester, glass filled
per MIL-M-24519, Liquid crystal
polymer (LCP) per ASTM D5138, or
Polyphenylene sulfide GST-40F per
ASTM D5927 or MIL-M-24519
Wire Terminations —
Solid copper per QQ-W-343 gold plated
per MIL-G-45204
Stranded TEFLON insulated per MIL-W-
16878
Stranded TEFLON insulated per MIL-W-
22759/11, /33
Solid copper per QQ-W-343, solder
dipped (Transition block)
MCDM-Metal Shell —
Insulator — Diallyl Phthalate per MIL-
M-14, Type SDG-F
Body Shell — Aluminum alloy—high
grade, nickel plated
Technical and Performance Data
(Applicable to MCK, MCD and MCDM unless otherwise noted)
MIL-DTL-83513 — Only the descriptive legend in bold italic is applicable to current MIL-DTL-83513 configurations;
MIL-DTL-83513/1 through /4 — MCK metal shell; MIL-DTL-83513/6 through /9 — MCD plastic shell.
In addition, MIL-DTL-83513 solid copper wire termination is specified 25 AWG, 0.5; and 1.0 [25.4] lengths only and
stranded insulated wire termination is specified 26 AWG, 18.0 [457.2] and 36.0 [914.4] lead lengths only. Hardware for
MIL-DTL-83513 configurations is specified separately by the M83513/5-XX designation. M83513/1 through /4 and /6
through /9 specify no hardware (B). Mounting/mating hardware is shown on page 14 with the applicable military
nomenclature. The MICRODOT catalog part number for a MIL-DTL-83513 configuration may be constructed
to include the desired hardware.
See pages 31-35 for M83513/ cross reference.
Twist Pin, Pin and Socket
Contacts
The contact spring member
normally found in socket
contacts has been eliminat-
ed by creating a breathing
helical spring principle on
the pin contact — smaller,
moredurable contacts
can be manufactured
economically.
Wire range 24-36 AWG solid & stranded.
Microminiature D Connectors
How To Specify MCK and MCD Connectors
7
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Microminiature D
Connectors
1
Metal Shell
Plastic Shell
MCK- C2 B 37 P 6 A 1 18.0
Lead Length in Inches (Min.)
X — Special, not described by legend.
Insulation Color or Finish
1 — All white wire 6—Bare (unfinished)
2—All yellow wire 7— Color coded per MIL-STD-681, System 1
3—All gray wire 8— Special color code
4—Gold plated9 — 10 Solid color repeating per M-83513
5—Tin dipped gold plated
Wire Type
A—Type E,7strand
B—Type ET,7strand
C—Type E,19 strand
D—Type ET,19 strand
F—7strand per MIL-W-22759/11
(28 AWG only)
G—19 strand per MIL-C-22759/11
(26 AWG only),24 AWG
L— Copper, Solid
(25 AWG only)
Q— Stranded per MIL-W-22759/33
(26 AWG only)
Wire Size
4—24 AWG 5—25 AWG 6 —26 AWG 8—28 AWG 0—30 AWG
Per MIL-W-16878
{
Connector Series
Shell Finish
C1— Cadmium, Clear
C2 — Cadmium, YellowChromate
N1—Nickel, Electroless
Hardware (See Pages 14 and 15)
B—No Hardware
F — Float Bushing
K,KM — Jackscrew, Slotted Head, HighProfile (9-51)
H,HM — Jackscrew, Slotted Head, HighProfile (100)
L, LM —Jackscrew, Slotted Head, LowProfile (9-51)
J,JM —Jackscrew, Slotted Head, LowProfile (100)
Q,QM — Jackscrew,Allen Head, HighProfile (9-51)
T,TM —Jackscrew,Allen Head, HighProfile (100)
R,RM — Jackscrew,Allen Head, LowProfile (9-51)
N,NM — Jackscrew,Allen Head, LowProfile (100)
P—Jackpost Assembly (9-51)
S—Jackpost Assembly (100)
X — Lockscrew, Slotted Head
Y—Lockscrew,Allen Head
Z—Clip and Key (Clip Mount Only)
Layout
9, 15, 21, 25, 31, 37, 51,100
See contact arrangement
Contact Type
P—Pin (Plug)
S—Socket (Receptacle)
S—Solder pots26AWG max.
MCD R3 B 37 P 6 A 1 18.0
Lead Length in Inches (Min.)
X — Special — Does not fit description below.
Insulation Color or Finish
1 — All white wire 6—Bare (unfinished)
2—All yellow wire 7— Color coded per MIL-STD-681, System 1
3—All gray wire 8— Special color code
4—Gold plated9 — 10 Solid color repeating per M-83513
5—Tin dipped gold plated
Wire Type
A—Type E,7strand
B—Type ET,7strand
C—Type E,19 strand
D—Type ET,19 strand
F—7strand per MIL-W-22759/11
(28 AWG only)
G—19 strand per MIL-C-22759/11
(26 AWG only),24 AWG
L— Copper, Solid
(25 AWG only)
Q— Stranded per MIL-W-22759/33
(26 AWG only)
Wire Size
4—24 AWG 5—25 AWG 6 —26 AWG 8—28 AWG 0—30 AWG
Per MIL-W-16878
{
Connector Series
Insulator Type/Material
G2 — Clip Mount, polyester, natural
G3 — ScrewMount, polyester, natural, .093 Flg.
R2 — Clip Mount, Ryton
R3 — Screw MountLiquid CrystalPolymer
orPolyphenyleneSulfide
Hardware (See Pages 14 and 15)
B—No Hardware
F — Float Bushing
K,KM — Jackscrew, Slotted Head, HighProfile
L, LM —Jackscrew, Slotted Head, LowProfile
Q,QM — Jackscrew,Allen Head, HighProfile
R,RM — Jackscrew,Allen Head, LowProfile
P—Jackpost Assembly
X — Lockscrew, Slotted Head
Y—Lockscrew,Allen Head
Z—Clip and Key (Clip Mount Only)
Layout
9, 15, 21, 25, 31, 37, 51
See contact arrangement
Contact Type
P—Pin (Plug)
S—Socket (Receptacle)
S—Solder pots26AWG max.
Note: Items in bold italic are qualified to MIL-DTL-83513.
Microminiature D Connectors
Contact Arrangements
8Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Note: MCK metal shells are not designed to intermate or interchange with MCD plastic shells. If metal/plastic intermating is desired, use MCDM Series Metal
Shell on pages 25 and 26 with MCD Series Plastic Shell on page 11.
113
25
14
119
20 37
5
1
9
6
8
1
915
111
21
12
116
17 31
118
19 35
36 51
1
9
16
24
8
1523
30
26
5175
100
1
27
52
76
100 Contacts
(MCK Only)
37 Contacts 51 Contacts
31 Contacts
30 Contacts
(MCDM Only)
25 Contacts
9Contacts 15 Contacts 21 Contacts
Face View of Pin Insert
(Socket Side is Mirror Image)
Microminiature D Connectors
MCK Series Metal Shell Connectors
9
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Microminiature D
Connectors
1
ACE FPart BMax. +.010 [.254] D Max
Number ± .010 [.254] -.018 [.457] ±.010 [.254] ± 005 [.127]
MCK**- 9P*** .775 .3338 .390 .270 .298 .565
19.68 8.48 9.91 6.86 7.57 14.35
MCK**- 9S*** .775 .4018 .390 .270 .298 .565
19.68 10.21 9.91 6.86 7.57 14.35
MCK**- 15P*** .925 .4838 .540 .270 .298 .715
23.50 12.29 13.72 6.86 7.57 18.16
MCK**- 15S*** .925 .5518 .540 .270 .298 .715
23.50 14.02 13.72 6.86 7.57 18.16
MCK**- 21P*** 1.075 .6338 .690 .270 .298 .865
27.30 16.10 17.53 6.86 7.57 21.97
MCK**- 21S*** 1.075 .7018 .690 .270 .298 .865
27.30 18.05 17.53 6.86 7.57 21.97
MCK**- 25P*** 1.175 .7338 .790 .270 .298 .965
29.84 18.64 20.07 6.86 7.57 24.51
MCK**- 25S*** 1.175 .8018 .790 .270 .298 .965
29.84 20.37 20.07 6.86 7.57 24.51
MCK**- 31P*** 1.325 .8838 .940 .270 .298 1.115
33.66 22.45 23.88 6.86 7.57 28.32
MCK**- 31S*** 1.325 .9518 .940 .270 .298 1.115
33.66 24.18 23.88 6.86 7.57 28.32
MCK**- 37P*** 1.475 1.0338 1.090 .270 .298 1.265
37.46 26.26 27.69 6.86 7.57 32.13
MCK**- 37S*** 1.475 1.1018 1.090 .270 .298 1.265
37.46 27.99 27.69 6.86 7.57 32.13
MCK**- 51P*** 1.425 .9838 1.040 .310 .341 1.215
36.20 24.99 26.42 7.87 8.66 30.86
MCK**- 51S*** 1.425 1.0518 1.040 .310 .341 1.215
36.20 26.72 26.42 7.87 8.66 30.86
MCK**- 100P*** 2.160 1.3838 1.432 .360 .384 1.800
54.86 35.15 36.37 9.15 9.75 45.71
MCK**- 100S*** 2.160 1.508 1.432 .360 .384 1.800
54.86 38.30 36.37 9.15 9.75 45.71
P = Pin, S = Socket
Dimensions per
MIL-DTL-83513
Plug
(Pin side)
Receptacle
(Socket side)
F
Contact #1
Pin E
A
Two Mtg. Holes
Pin
B
Pin
D
.183±.003
[4.65±0.08]
.093±.005
[2.36±0.13]
Ø.092±.004
[2.34±0.10]
Ø.145–.150
[3.68 – 3.81]
.406±.010
[10.31±0.25]
C
Crimp or Solder
Crimp or Solder
Socket
Socket Socket
F
Contact #1
E
A
.419±.010
[10.64±0.25]
C
.195±.003
[4.95±0.08]
.093±.005
[2.36±0.13]D
B
(9-51 )
(100 )
Two Mtg. Holes
Ø.092±.004
[2.34±0.10]
Ø.145–.150
[3.68 – 3.81]
(9-51 )
(100 )
Microminiature D Connectors
MCK Series Metal Shell Connectors Panel Mounting — Cutout Dimensions
10 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Panel Mounting
Dimensions —
MCK
Plug and Receptacle
Rear Mounted Plug and Receptacle
Front Mounted Plug Front Mounted
Receptacle Rear Mounted
.200
[5.08]
.395
[10.03] .300
[7.62]
A
A
C
C
B
B
.095
[2.41]
.095
[2.41]
.122
[3.10]
.122
[3.10]
.015
[.381] Max.
Typ.
Full Radius
(Typ.)
Full Radius
(Typ.)
Full Radius
(Typ.)
Full Radius
(Typ.)
116 Typ.
R
R 4 Plcs.
9-51
9-51
100
100
Figure 1
Front Mounting
Figure 2
Rear Mounting
Front Mounting
Rear Mounting
.015
[.381]
.369/.364
[9.37/9.24]
.403/.398
[10.24/10.11]
1.810/1.805
[45.98/45.85]
1.810/1.805
[45.98/45.85]
1.448
.002
[36.83/36.73]
1.514
.002
[38.51/38.40]
Max.
Typ.
R
.055
[1.40] Max.
Typ.
R
+.005
–.000
+.127
–.000
.101
[2.56 ]
Number A B C
of Fig. +.004 [.102] +.004 [.102] +.005 [.127]
Contacts – .000 [.000] – .000 [.000] – .000 [.000]
1.404 .274 .570
910.26 6.96 14.48
2.406 .257 .570
10.31 6.53 14.48
1.554 .274 .720
15 14.07 6.96 18.29
2.556 .257 .720
14.12 6.53 18.29
1.704 .274 .870
21 17.88 6.96 22.10
2.706 .257 .870
17.93 6.53 22.10
1.804 .274 .970
25 20.42 6.96 24.64
2.806 .257 .970
20.47 6.53 24.64
1.954 .274 1.120
31 24.23 6.96 28.45
2.956 .257 1.120
24.28 6.53 28.45
11.104 .274 1.270
37 28.04 6.96 32.26
21.106 .257 1.270
28.09 6.53 32.26
11.054 .314 1.220
51 26.77 7.98 30.99
21.056 .300 1.220
26.82 7.62 30.99
Panel Cutout Dimensions —
MCK
Microminiature D Connectors
MCD Series Plastic Shell Connectors
11
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Microminiature D
Connectors
1
Part A CEF
Avg. Weight
Number BMax. +.010 [.254] D Max lbs. ± 5%
± .010 [.254] -.018 [.457] ±.010 [.254] ± 005 [.127] [grams]
MCD**- 9P*** .778 .2918 .398 .173 .208 .565 .0017
19.76 7.412 10.11 4.39 5.28 14.35 0.77
MCD**- 9S*** .778 .3798 .398 .173 .208 .565 .0016
19.76 9.647 10.11 4.39 5.28 14.35 0.72
MCD**- 15P*** .928 .4418 .548 .173 .208 .715 .0024
23.57 11.222 13.92 4.39 5.28 18.16 1.08
MCD**- 15S*** .928 .5298 .548 .173 .208 .715 .0023
23.57 13.457 13.92 4.39 5.28 18.16 1.04
MCD**- 21P*** 1.078 .5918 .698 .173 .208 .865 .0035
27.38 15.032 17.73 4.39 5.28 21.97 1.59
MCD**- 21S*** 1.078 .6798 .698 .173 .208 .865 .0034
27.38 17.267 17.73 4.39 5.28 21.97 1.54
MCD**- 25P*** 1.178 .6918 .798 .173 .208 .965 .0042
29.92 17.572 20.27 4.39 5.28 24.51 1.90
MCD**- 25S*** 1.178 .7798 .798 .173 .208 .965 .0037
29.92 19.807 20.27 4.39 5.28 24.51 1.67
MCD**- 31P*** 1.328 .8418 .948 .173 .208 1.115 .0053
33.73 21.382 24.08 4.39 5.28 28.32 2.40
MCD**- 31S*** 1.328 .9298 .948 .173 .208 1.115 .0048
33.73 23.617 24.08 4.39 5.28 28.32 2.17
MCD**- 37P*** 1.478 .9918 1.098 .173 .208 1.265 .0057
37.54 25.192 27.89 4.39 5.28 32.13 2.58
MCD**- 37S*** 1.478 1.0798 1.098 .173 .208 1.265 .0051
37.54 27.427 27.89 4.39 5.28 32.13 2.31
MCD**- 51P*** 1.428 .9418 1.048 .220 .250 1.215 .0072
36.27 23.922 26.62 5.59 6.35 30.86 3.26
MCD**- 51S*** 1.428 1.0298 1.048 .220 .250 1.215 .0063
36.27 26.157 26.62 5.59 6.35 30.86 2.85
P = Pin, S = Socket
Note: Weight given is with .500 [12.7] uninsulated, solid, 24 AWG gold plated copper pigtails.
*See “How to Specify” for description, on page 7.
Screw Mount
Dimensions Per
MIL-DTL-83513
Plug
(Pin side)
Receptacle
(Socket side)
F
Contact #1
Pin E
A
Two Mtg. Holes
Pin
B
Pin
D
.199±.005
[5.05±.13]
.094±.006
[2.39±0.15]
Ø.092±.004
[2.34±.10]
.395/.360
[10.0 3/9.14]
C
Crimp or Solder
Crimp or Solder
F
Contact #1
E
A
Two Mtg. Holes
Ø.092±.004
[2.34±0.10]
.375/.340
[9.52/8.64]
C
.180±.005
[4.57±0.13]
.094±.006
[2.39±0.15] D
B
Socket
Socket Socket
Liquid Crystal Polymer or
Polyphenylene Sulfide — MCDR3* per
MIL-DTL-83513 Note: MCD Plastic Screw Mount Series is intermateable with MCDM Metal Series Connectors (Pages 25 and 26).
Microminiature D Connectors
MCD Series Plastic Shell Connectors (Continued)
12 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Part A C D E Avg. Weight
Number ±.005 [.127] BMax. ±.010 [.254] ±.010 [.254] ±.005 [.127] lbs. ± 5%
[grams]
MCD**- 9P*** .506 .2918 .398 .165 .208 .0017
12.85 74.12 10.11 4.19 5.28 0.77
MCD**- 9S*** .506 .3798 .398 .165 .208 .0016
12.85 96.47 10.11 4.19 5.28 0.72
MCD**- 15P*** .656 .4418 .548 .165 .208 .0024
16.66 112.22 13.92 4.19 5.28 1.08
MCD**- 15S*** .656 .5298 .548 .165 .208 .0023
16.66 134.57 13.92 4.19 5.28 1.04
MCD**- 21P*** .806 .5918 .698 .165 .208 .0035
20.47 150.32 17.73 4.19 5.28 1.59
MCD**- 21S*** .806 .6798 .698 .165 .208 .0034
20.47 172.67 17.73 4.19 5.28 1.54
MCD**- 25P*** .906 .6918 .798 .165 .208 .0042
23.01 175.72 20.27 4.19 5.28 1.90
MCD**- 25S*** .906 .7798 .798 .165 .208 .0037
23.01 198.07 20.27 4.19 5.28 1.67
MCD**- 31P*** 1.056 .8418 .948 .165 .208 .0053
26.82 213.82 24.08 4.19 5.28 2.40
MCD**- 31S*** 1.056 .9298 .948 .165 .208 .0048
26.82 236.17 24.08 4.19 5.28 2.17
MCD**- 37P*** 1.206 .9918 1.098 .165 .208 .0057
30.63 251.92 27.89 4.19 5.28 2.58
MCD**- 37S*** 1.206 1.0798 1.098 .165 .208 .0051
30.63 274.27 27.89 4.19 5.28 2.31
MCD**- 51P*** 1.156 .9418 1.048 .208 .250 .0072
29.36 239.22 26.62 5.28 6.35 3.26
MCD**- 51S*** 1.156 1.0298 1.048 .208 .250 .0063
29.36 261.57 26.62 5.28 6.35 2.85
P = Pin, S = Socket
Note: Weight given is with .500 [12.7] uninsulated, solid, 24 AWG gold plated copper pigtails.
*See “How to Specify” for description, on page 7.
Clip Mount — MCD
Plug
(Pin side)
Receptacle
(Socket side)
Contact #1
Pin E
A
Pin
B
Pin
D
.199
[5.05]
.395/.360
[10.03/9.14]
C
Crimp or Solder
Crimp or Solder
.093
±.003
[2.44/2.29]
Contact #1
Socket E
A
Socket
B
Socket
D
.180
[4.57]
.375/.340
[9.52/8.64]
C
.093
±.003
[2.44/2.29]
.019
[.483]
.019
[.483]
.060
[1.52]
.060
[1.52]
Note: Clip Mount not covered by
current issue of MIL-DTL-83513.
Microminiature D Connectors
MCD Series Plastic Shell Connectors Panel Mounting — Cutout Dimensions
13
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Microminiature D
Connectors
1
Panel Mounting Dimensions — MCD
Clip Mount
Screw Mount
Plug and Receptacle
Rear Mounted
.200±
.005
[5.08±
0.13
]
Plug and Receptacle
Front Mounted
Plug Front Mounted
Receptacle Rear Mounted
.330±
.005
[8.38±
0.13
]
.265±
.005
[6.73±
0.13
]
Plug and Receptacle
Rear Mounted
.200±
.005
[5.08±
0.13
]
Plug and Receptacle
Front Mounted
Plug Front Mounted
Receptacle Rear Mounted
.395±
.005
[10.03±
0.13
]
.300±
.005
[7.62±
0.13
]
Front
Full
Radius
(Typ.) R
R
A
A
C
B
Figure 2
Front
Figure 1
Rear
Figure 4
Rear
Figure 3
B
B
Full
Radius
(Typ.)
116 Typ.
A
C
+ .005
– .000
+ 0.13
– 0.00
.089
[2.26]
+ .005
– .000
+ 0.13
– 0.00
.075
[1.90]
.015
[.381]
Max. Typ.
R.015
[.381]
.089
[2.26]
Max.
Typ.
B
A
R.015
[.381]Max.
Typ.
Number A B C
of Fig. +.004 [.102] +.004 [.102] +.005 [.127]
Contacts – .000 [.000] – .000 [.000] – .000 [.000]
1.438 [11.13] .177 [4.50] —
92.412 [10.46] .177 [4.50] .570 [14.48]
3.438 [11.13] .222 [5.64] —
4.384 [9.75] .222 [5.64] .570 [14.48]
1.588 [14.93] .177 [4.50] —
15 2.562 [14.27] .177 [4.50] .720 [18.29]
3.588 [14.93] .222 [5.64] —
4.534 [13.56] .222 [5.64] .720 [18.29]
1.738 [18.75] .177 [4.50] —
21 2.712 [18.08] .177 [4.50] .870 [22.10]
3.738 [18.75] .222 [5.64] —
4.684 [17.37] .222 [5.64] .870 [22.10]
1.838 [21.29] .177 [4.50] —
25 2.812 [20.62] .177 [4.50] .970 [24.64]
3.838 [21.29] .222 [5.64] —
4.784 [19.91] .222 [5.64] .970 [24.64]
1.988 [25.10] .177 [4.50] —
31 2.962 [24.43] .177 [4.50] 1.120 [28.45]
3.988 [25.10] .222 [5.64] —
4.934 [23.72] .222 [5.64] 1.120 [28.45]
11.138 [28.91] .177 [4.50] —
37 21.112 [28.24] .177 [4.50] 1.270 [32.26]
31.138 [28.91] .222 [5.64] —
41.084 [27.53] .222 [5.64] 1.270 [32.26]
11.088 [27.64] .224 [5.69] —
51 21.062 [26.97] .224 [5.69] 1.220 [30.99]
31.088 [27.64] .264 [6.71] —
41.034 [26.26] .264 [6.71] 1.220 [30.99]
Panel Cutout Dimensions — MCD
Clip Mounting
Screw Mounting
Notes: Front mounting preferred.
Microminiature D Connectors
Mounting and Coupling Hardware
14 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Ø .156
[3.96]Max.
Over Knurl
Jackscrew
.086-56UNC-2A
[2.18]
Retaining
Ring .853
±.015
[21.67
±0.38
]
.600
[15.24]
For Screw Mount MCK,
MCD and MCDM
9-51 Contacts
Slot Head (K)
(KM)
Part Number 5-1532137-8
Jackscrew Assembly
High Profile
(K) 096-0002-0010
M83513/5-06
(KM) S96-0002-0084
Ø.125
[3.18]
Jackscrew
.086-56UNC-2A
[2.18]
Retaining
Ring .340–.360
[8.64–9.14]
.098
[2.29]
(L)
(LM)
Part Number 5-1532137-7
Jackscrew Assembly
Low Profile
(L) 096-0002-0011
M83513/5-05
(LM) S96-0002-0085
Lockwasher
Bushing
.086-56UNC-2A
[2.18]
.086-56UNC-2B
[2.18]
Hex Nut
.475
[12.07]
.187
[4.75]
Hex.
.125
[3.18]
(P)
Part Number 5-1532137-9
Jackpost Assembly
(P) S96-0002-0009
M83513/5-07
P mates with K,KM, L,LM, Q,QM
and R,RM Jackscrew Assemblies.
Ø .156
[3.96] Max.
Over Knurl
Jackscrew
.086-56UNC-2A
[2.18]
Retaining
Ring .853
±.015
[21.67
±0.38
]
.600
[15.24]
9-51 Contacts
1/16" Allen Head (Q)
(QM)
Part Number 5-1532137-6
Jackscrew Assembly
High Profile
(Q) 096-0002-0014
M83513/5-03
(QM) S96-0002-0086
Ø .125
[3.18]
Jackscrew
.086-56UNC-2A
[2.18]
Retaining
Ring .340–.360
[8.64–9.14]
.098
[2.29]
(R)
(RM)
Part Number 5-1532137-5
Jackscrew Assembly
Low Profile
(R) 096-0002-0015
M83513/5-02
(RM) S96-0002-0087
Ø .200
[3.96] Max.
Over Knurl
Max.
Jackscrew
.112-40UNC-2A
[2.84]
Retaining
Ring .920
[23.37]
.585
[14.86]
100 Contacts
Slot Head (H)
(HM)
Part Number 6-1532137-3
Jackscrew Assembly
High Profile
(H) 096-0002-0061
M83513/5-16
(HM) S96-0002-0088
Ø .187
[4.75]
Jackscrew
Max.
.112-40UNC-2A
[2.84]
Retaining
Ring .415
[10.54]
.100
[2.54]
(J)
(JM)
Part Number 6-1532137-2
Jackscrew Assembly
Low Profile
(J) 096-0002-0062
M83513/5-15
(JM) S96-0002-0089
Lockwasher
Bushing
.112-40UNC-2A
[2.84]
.112-40UNC-2B
[2.84]
Hex Nut
.475
[12.07]
Max.
.185
[4.70]
Hex.
.187
[4.75]
(S)
Part Number 6-1532137-4
Jackpost Assembly
(S) S96-0002-0060
M83513/5-17
Smates with H,HM, J,JM, T,TM and
N,NM Jackscrew Assemblies.
Ø .200
[3.96] Max.
Over Knurl
Max.
Jackscrew
.112-40UNC-2A
[2.84]
Retaining
Ring .920
[23.37]
.585
[14.86]
100 Contacts
1/16" Allen Head (T)
(TM)
Part Number 6-1532137-1
Jackscrew Assembly
High Profile
(T) 096-0002-0064
M83513/5-13
(TM) S96-0002-0090
Ø .187
[4.75]
Jackscrew
Max.
.112-40UNC-2A
[2.84]
Retaining
Ring .415
[10.54]
.100
[2.54]
(N)
(NM)
Part Number 6-1532137-0
Jackscrew Assembly
Low Profile
(N) 096-0002-0065
M83513/5-12
(NM) S96-0002-0091
Notes:
1. Jackpost Assemblies will accom-
modate .094 [2.39] max. thick-
ness panel.
2. Letter(s) in parentheses is to assist
in ordering hardware with the con-
nector (See “How To Specify”
page 7).
3. Single letters (e.g. K) designate
hardware kits (2 pcs. per kit) that
meets M83513/05 requirements
except the material is 303 stain-
less steel, passivated.
4. Add M suffix (e.g. KM) to desig-
nate hardware that meets all
M83513/05 requirements.
Material is corrosion resistant
steel, non-magnetic, 125,000 PSI
tensile strength minimum (Applies
to jackscrews only).
5. Non-MIL hardware ordered sepa-
rately should be ordered in pairs;
i.e. 2 pcs. P/N 096-0002-0009 per
connector half.
6. Items in bold italic arequalified to
MIL-DTL-83513.
Microminiature D Connectors
Mounting and Coupling Hardware (Continued)
15
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Microminiature D
Connectors
1
.356
[9.04]
.600
[15.24]
For Clip Mount — MCD (Z)
(X)
Part Number 1466018-1
Mounting Key and Clip
P/N 096-0001-0000
(2 Required)
.075
[1.91]
Ø.125
[3.18]
Retaining Clip
.086
[2.18]-56UNC-2A
Lockscrew
Part Number 4-1532137-3
Lockscrew Assembly
096-0002-0008
.075
[1.91]
Ø.125
[3.18]
Lockscrew
Retaining Clip
.086
[2.18]
.343
±.010
[8.71
±0.25
]
-56UNC-2A
Part Number 1495164-1
Lockscrew Assembly
096-0002-0013
Slot Head 1/16" Allen Head
Notes:
1. Jackpost Assemblies will accommodate .094 [2.39] max. thickness panel.
2. Letter(s) in parentheses is to assist in ordering hardware with the connector (See “How ToSpecify” page 7).
3. Hardware ordered separately should be ordered in pairs; i.e. 2 pcs. P/N 096-0002-0013 per connector half.
For Screw Mount MCK,
MCD and MCDM (Continued) (Y)
For Float Mount — MCK,
MCD and MCDM (F)
Float Mount Bushing
(Factory Installed)
Washer
Bushing
Microminiature D Connectors
MCK Transition Blocks
16 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
RT1 — Right-Angle
Termination Configuration
Notes:
1. For terminal identification see page 18.
2. Grid pattern for all configurations is .100 x .100 [2.54 x 2.54].
3. Lead lengths shown are for RT1.
4. Items in bold italic arequalified to MIL-DTL-83513.
.109
±.015
[2.77
±0.39
]
.185
[4.70]
9, 15, 21 & 25 Contacts 31, 37, 51 & 100 Contacts
Contact #1
(Socket Connectors)
Optional Jackpost (2 Plcs.)
For 9 Thru 51: .086-56 UNC-2B
For 100: .112-40 UNC-2B
Mounting Surface
Mounting Surface
Max.
(Size 100 only)
.190
[4.83]Max.
(Sizes 9-51)
.096
±.003
[2.44
±0.08
]Dia.
Typ. .125
±.003
[3.18
±0 .08
]Dia.
Typ.
Mounting
Surface
Contact #1
(Pin Connectors)
A
B
C
D
EF
E
F
H
GG
(Size 100 Only)
.096
±.003
[2.44
±0 .08
]Dia.
Typ.
MIL-DTL-83513/10 through /21
configurations. 90° — Lo Profile
termination configurations.
See pages 31-35 for M83513
cross references.
How To Specify
MCK C2 P 37 P RT1
Right Angle Termination (Solder Dipped)
RT1 — w/ .109 Leads
RT1A — w/ .140 Leads
RT1B — w/ .172 Leads
Contact Type
S=STD Socket
P=STD Pin
Layout
9,15, 21,25, 31, 37, 51 and 100
Hardware
P = Jackpost (9-51)
B= No Hardware
S = (100)
Shell Finish
C2= Cadmium, YellowChromate
N1= Nickel, Electroless
Connector Series
(See page 9)
Microminiature D Connectors
MCK Transition Blocks (Continued)
17
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Microminiature D
Connectors
1
RT1 — Right-Angle
Termination Configuration
(Continued)
Part Number ABCDEFGH
Max. ± 005 [.127] Max. Max. Max. +.010 [.254] +.010 [.254] Max.
MCK-**- *- 9PRT1 .787 .565 .3338 .308 .425 .250 .230 —
19.99 14.35 8.48 7.83 10.80 6.35 5.84
MCK-**- *- 9SRT1 .787 .565 .4018 .308 .425 .250 .230 —
19.99 14.35 10.21 7.83 10.80 6.35 5.84
MCK-**- *- 15PRT1 .937 .715 .4838 .308 .425 .250 .130 —
23.80 18.16 12.29 7.83 10.80 6.35 3.30
MCK-**- *- 15SRT1 .937 .715 .5518 .308 .425 .250 .130 —
23.80 18.16 14.02 7.83 10.80 6.35 3.30
MCK-**- *- 21PRT1 1.087 .865 .6338 .308 .425 .250 .130 —
27.61 21.97 16.10 7.83 10.80 6.35 3.30
MCK-**- *- 21SRT1 1.087 .865 .7018 .308 .425 .250 .130 —
27.61 21.97 17.83 7.83 10.80 6.35 3.30
MCK-**- *- 25PRT1 1.187 .965 .7338 .308 .425 .250 .130 —
30.15 24.51 18.64 7.83 10.80 6.35 3.30
MCK-**- *- 25SRT1 1.187 .965 .8018 .308 .425 .250 .130 —
30.15 24.51 20.37 7.83 10.80 6.35 3.30
MCK-**- *- 31PRT1 1.337 1.115 .8838 .308 .525 .250 .130 1.090
33.96 28.32 22.45 7.83 13.34 6.35 3.30 27.69
MCK-**- *- 31SRT11.337 1.115 .9518 .308 .525 .250 .130 1.090
33.96 28.32 24.18 7.83 13.34 6.35 3.30 27.69
MCK-**- *- 37PRT1 1.487 1.265 1.0338 .308 .525 .250 .130 1.190
37.77 32.13 26.26 7.83 13.34 6.35 3.30 30.23
MCK-**- *- 37SRT1 1.487 1.265 1.1018 .308 .525 .250 .130 1.190
37.77 32.13 27.99 7.83 13.34 6.35 3.30 30.23
MCK-**- *- 51PRT1 1.435 1.215 .9838 .351 .660 .300 .150 1.230
36.45 30.86 24.99 8.92 16.76 7.62 3.81 31.24
MCK-**- *- 51SRT1 1.435 1.215 1.0518 .351 .660 .300 .150 1.230
36.45 30.86 26.72 8.92 16.76 7.62 3.81 31.24
MCK-**- *- 100PRT1 2.175 1.800 1.3838 .394 1.010 .400 .200 1.825
55.25 45.72 35.15 10.01 25.65 10.16 5.08 46.36
MCK-**- *- 100SRT1 2.175 1.800 1.508 .394 1.010 .400 .200 1.825
55.25 45.72 38.30 10.01 25.65 10.16 5.08 46.36
P = Pin, S = Socket
Note: Items in bold italic arequalified to MIL-DTL-83513.
Microminiature D Connectors
MCK Transition Blocks (Continued)
18 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
RT1 — Right-Angle
Termination Configuration
(Continued)
View is from mounting surface of
connector. Plug configuration shown.
For receptacle, use mirror image.
(Except 100 contacts)
12 11 10 8 6 4 3 2
25 23 21 20 19 18 16 14
13 24 22 9 7 5 17 15 1
11 9 7 17 4 14 1
21 20 19 18 16 15 13 12
10 8 6 5 3 2
7542
8 6 12 3 1
15 14 13 11 10 9
17 15 13 11 27 8 6 4 2
18 16 14 12 10 9 7 5 3 1
35 33 31 29 46 43 41 25 23 21 19
34 32 30 28 45 42 26 24 22 20
51 50 49 48 47 44 40 39 38 37 36
54 2 1
9 8 3 7 6
36 34 32 30 27 25 2 21
37 35 33 31 29 28 26 24 22 20
19 17 15 13 11 9 7 5 3 1
18 16 14 12 10 8 6 4 2
15 13 11 9 8 6 4 2
16 14 12 10 24 7 5 3 1
30 29 27 25 23 21 9 17
328 26 22 20 18
2 4 6 8 10 12 14 16 18 20 22 24 26
77 79 81 83 85 87 89 91 93 95 97 99
1 3 5 7 9 11 13 15 17 19 21 23 25
27 29 31 33 35 37 39 41 43 45 47 49 51
28 30 32 34 36 38 40 42 44 46 48 50
52 54 56 58 60 62 64 66 68 70 72 74
53 55 57 59 61 63 65 67 69 71 73 75
76 78 80 82 84 86 88 90 92 94 96 98 100
25 23 21 19 17 15 13 11 9 7 5 3 1
26 24 22 20 18 16 14 12 10 8 6 4 2
51 49 47 45 43 41 39 37 35 33 31 29 27
50 48 46 44 42 40 38 36 34 32 30 28
75 73 71 69 67 65 63 61 59 57 55 53
74 72 70 68 66 64 62 60 58 56 54 52
100 98 96 94 92 90 88 86 84 82 80 78 76
99 97 95 93 91 89 87 85 83 81 79 77
C
L
C
L
C
L
.100
[2.54] Typ. .050
[1.27]
.020
[0.51]
.020
[0.51]
.020
[0.51]
.083
[2.11]
Typ.
Typ. .100
[2.54] .158
[4.01]
Typ.
C
LC
L
C
L
C
L
C
L
.100
[2.54] Typ. .050
[1.27]
.108
[2.74]
.020
[0.51]
.020
[0.51]
.183
[4.65]
.100
[2.54] Typ.
.100
[2.54] Typ.
1.800
[45.72] Ref. .275
[6.99] Ref.
.100
[2.54] Typ.
Ref.
.100
[2.54] Typ.
.100
[2.54] Ref.
Socket #1 Ref.
(Receptacle Connector)
.025
[0.64] Ref.
.050
[1.27] Typ.
Ref.
1.800
[45.72] Ref. .275
[6.99] Ref.
.100
[2.54] Typ.
Ref.
.100
[2.54] Ref.
.050
[1.27] Typ.
Ref.
.050
[1.27]
Typ.
.050
[1.27]
Typ.
.050
[1.27]
.100
[2.54]
.050
[1.27]
.108
[2.74]
Typ.
Typ.
.050
[1.27]
.083
[2.11]
Typ.
9Contacts
31 Contacts
37 Contacts
100 Contacts
(Socket Connector)
.100
[2.54] Ref.
Pin #1 Ref.
(Plug Connector)
.025
[0.64] Ref.
100 Contacts
(Pin Connector)
51 Contacts
.100
[2.54] Typ. .050
[1.27] .020
[0.51]
.083
[2.11]
Typ.
21 Contacts
25 Contacts
15 Contacts
C
L
1.266
[32.16] Ref. 1.216
[30.89] Ref.
.966
[24.54] Ref. 1.116
[28.35] Ref.
.866
[22.00] Ref.
.716
[18.19] Ref.
.566
[14.38] Ref.
Microminiature D Connectors
MCK Transition Blocks (Continued)
19
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Microminiature D
Connectors
1
How To Specify
ST1 — Straight
Termination Configuration
.185
[4.70]
.190
[4.83] Max. (Sizes 9-51)
(Sizes 9-51)
Max. (Size100 only)
.550
[13.97] Max.
.355
[9.02] Max.
.100
[2.54] Typ.
.050
[1.27] Typ.
.165
[4.20] Max. (Sizes 9-51) .303
[7.70] Max. (Size 100 only)
.096±.003
[2.44±.076] Dia. Typ.
(For Size 9 Thru 51)
.125±.003
[3.18±.076] Dia. Typ.
(For Size 100 Only)
Contact #1
(Socket Connector)
Contact #1
(Pin Connector)
Lead #1
(Pin Connector) Lead #1
(Socket Connector)
Optional Jackpost (2 Plcs.)
For 9 Thru 51: .086-56 UNC-2B
For 100: .112-40 UNC-2B
A
B
F
C
D
E
.109
±.015
[2.77
±0.39
]
(Lead Length For ST1 Shown)
(Size100 only)
MIL-DTL-83513/22 through /27
configurations. 180° — Lo Profile
termination configurations.
See page 35 for M83513 cross
references.
MCK C2 P 37 P ST1
Straight Termination (Solder Dipped)
ST1 — w/ .109 Leads
ST1A — w/ .140 Leads
ST1B — w/ .172 Leads
Contact Type
S=STDSocket
P=STD Pin
Layout
9,15, 21,25, 31, 37, 51 and 100
Hardware
P = Jackpost (9-51)
B= No Hardware
S= (100)
Shell Finish
C2= Cadmium, YellowChromate
N1= Nickel, Electroless
Connector Series
(See page 9)
Notes:
1. For terminal identification see page 5048.
2. Grid pattern for all configurations is .100 x .100 [2.54 x 2.54].
3. Lead lengths shown are for ST1.
4. Items in bold italic arequalified to MIL-DTL-83513.
Microminiature D Connectors
MCK Transition Blocks (Continued)
20 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Part Number ABCDEF
Max. ± .007 [.178] ± .005 [.127] Max. Max. Max.
MCK-**- *- 9PST1 1.390 1.150 .565 .885 .3338 .308
35.31 29.21 14.35 22.48 8.48 7.83
MCK-**- *- 9SST1 1.390 1.150 .565 .885 .4018 .308
35.31 29.21 14.35 22.48 10.21 7.83
MCK-**- *- 15PST1 1.390 1.150 .715 .945 .4838 .308
35.31 29.21 18.16 24.00 12.29 7.83
MCK-**- *- 15SST1 1.390 1.150 .715 .945 .5518 .308
35.31 29.21 18.16 24.00 14.02 7.83
MCK-**- *- 21PST1 1.690 1.450 .865 1.185 .6338 .308
42.93 36.83 21.97 30.10 16.10 7.83
MCK-**- *- 21SST1 1.690 1.450 .865 1.185 .7018 .308
42.93 36.83 21.97 30.10 17.83 7.83
MCK-**- *- 25PST1 1.740 1.500 .965 1.275 .7338 .308
44.20 38.10 24.51 32.39 18.64 7.83
MCK-**- *- 25SST1 1.740 1.500 .965 1.275 .8018 .308
44.20 38.10 24.51 32.39 20.37 7.83
MCK-**- *- 31PST1 2.040 1.800 1.115 1.575 .8838 .308
51.82 45.72 28.32 40.01 22.45 7.83
MCK-**- *- 31SST1 2.040 1.800 1.115 1.575 .9518 .308
51.82 45.72 28.32 40.01 24.18 7.83
MCK-**- *- 37PST1 2.340 2.100 1.265 1.875 1.0338 .308
59.44 53.34 32.13 47.63 26.26 7.83
MCK-**- *- 37SST1 2.340 2.100 1.265 1.875 1.1018 .308
59.44 53.34 32.13 47.63 27.99 7.83
MCK-**- *- 51PST1 2.270 2.000 1.215 1.775 .9838 .351
57.66 50.80 30.86 45.09 24.99 8.92
MCK-**- *- 51SST1 2.280 2.000 1.215 1.775 1.0518 .351
57.91 50.80 30.86 45.09 26.72 8.92
MCK-**- *- 100PST1 3.250 2.800 1.800 2.585 1.3838 .460
82.55 71.12 45.72 65.66 35.15 11.68
MCK-**- *- 100SST1 3.250 2.800 1.800 2.585 1.508 .460
82.55 71.12 45.72 65.66 38.30 11.68
P = Pin, S = Socket
ST1 — Straight Termination
Configuration (Continued)
Note: Items in bold italic are qualified to MIL-DTL-83513.
Microminiature D Connectors
MCK Transition Blocks (Continued)
21
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Microminiature D
Connectors
1
ST1 — Straight Termination
Configuration (Continued)
View is from mounting surface of
connector. Plug configuration shown.
For receptacle, use mirror image.
15
6917 31
116
20 37
119
9 15
1 8
12 21
1 11
14 25
1 13
36 51
19 35
1 18
76 100
52 75
27 51
1 26
C
LC
L
C
L
C
L
C
L
.100
[2.54] Typ.
.050
[1.27]
C
L
C
L
C
L
.100
[2.54] Typ.
.050
[1.27]
.050
[1.27]
.050
[1.27]
.375
[9.53]
.225
[5.72]
.050
[1.27]
.225
[5.72]
.050
[1.27]
.150
[3.81]
.050
[1.27]
.150
[3.81]
.050
[1.27]
.150
[3.81]
Typ.
.100
[2.54] Typ.
.050
[1.27] Typ.
.100
[2.54] Typ.
.050
[1.27] Typ.
.100
[2.54] Typ.
.050
[1.27] Typ.
.100
[2.54] Typ.
.050
[1.27] Typ.
Typ.
.100
[2.54] Typ.
.050
[1.27] Typ.
.100
[2.54]Typ.
.050
[1.27]
Typ.
9 Contacts
15 Contacts
21 Contacts
25 Contacts
31 Contacts
37 Contacts
51 Contacts
100 Contacts
.050
[1.27]
.150
[3.81]
.100
[2.54]
.150
[3.81]
Socket #1 Ref.
(Receptacle Connector)
Pin #1 Ref.
(Plug Connector)
Microminiature D Connectors
MCK ST2 Series Straight Mount PCB Connectors
22 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
MCK with Cactus Bend
Termination
nMeets MIL-DTL-83513
Performance requirements
nSingle metal shell with no
Transition Block
nLow profile and light weight
n.100 [2.54] x .075 [1.91]
grid pattern
nDesign allows lower cost
construction
Pin
Pin
Contact #1 2-56 UNC-2B Thd.
Opt. Jackpost
2 Plcs.
2-56 Thd.
Studs. Opt.
A
C
B
.308
[7.83] Max.
.190
[4.83] Max.
.400
[10.16]
.210
±.02
[5.33
±0.5
]
.182
±.004
[4.62
±0.10
]
#25 AWG, Copper, Hard,
Gold Plated, Solder Dipped
Metal Mounting
Surface
Max.
.100
[2.54] Typ. .075
[1.91] Typ.
.075
[1.91] Typ.
.109
[2.76] Min. .160
[4.06] Min.
.050
[1.27] Typ. .025
[0.64] Typ.
.038
[0.97] Typ.
.225
[5.72]Ref.
Socket
Socket
Contact #1 2-56 UNC-2B Thd.
Opt. Jackpost
2 Plcs.
2-56 Thd.
Studs. Opt.
A
C
B
.308
[7.83] Max.
.190
[4.83] Max.
.400
[10.16]
.210
±.02
[5.33
±0.5
]
.195
±.003
[4.95
±0.08
]
#25 AWG, Copper, Hard,
Gold Plated, Solder Dipped
Metal Mounting
Surface
Max.
.100
[2.54] Typ. .075
[1.91] Typ.
.075
[1.91] Typ.
.109
[2.76] Min. .160
[4.06] Min.
.050
[1.27] Typ. .025
[0.64] Typ.
.038
[0.97] Typ.
.225
[5.72]Ref.
Microminiature D Connectors
MCK ST2 Series Straight Mount PCB Connectors (Continued)
23
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Microminiature D
Connectors
1
Part Number AB± .005 C
Max. Max.
MCK-**-*- 9 PST2 .785 .565 .333
19.94 14.35 8.46
MCK-**-*- 9 SST2 .785 .565 .402
19.94 14.35 10.21
MCK-**-*- 15 PST2 .935 .715 .483
23.75 18.16 12.27
MCK-**-*- 15 SST2 .935 .715 .552
23.75 18.16 14.02
MCK-**-*- 21 PST2 1.085 .865 .633
27.56 21.97 16.08
MCK-**-*- 21 SST2 1.085 .865 .702
27.56 21.97 17.83
MCK-**-*- 25 PST2 1.185 .965 .733
30.10 24.51 18.62
MCK-**-*- 25 SST2 1.185 .965 .802
30.10 24.51 20.37
MCK-**-*- 31 PST2 1.335 1.115 .883
33.91 28.32 22.43
MCK-**-*- 31 SST2 1.335 1.115 .952
33.91 28.32 24.18
MCK-**-*- 37 PST2 1.485 1.265 1.033
37.72 32.13 26.24
MCK-**-*- 37 SST2 1.485 1.265 1.102
37.72 32.13 27.99
MCK C2 P 37 P ST2
Straight Termination
Contact Type
S = Standard Socket
P = Standard Pin
Layout
9, 15, 21, 25, 31, 37
Hardware
P = Jackpost (2-56 THD)
B = No Hardware
Shell Finish
C2 = Cadmium, Yellow Chromate
N1 = Nickel, Electroless
Connector Series
(See Page 9)
How To Specify
Microminiature D Connectors
MCK ST2 Series Straight Mount PCB Connectors (Continued)
24 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
.183
[4.65]
.183
[4.65]
C
L
C
L
C
L
C
L
C
L
C
L
68
79
24
135
10 12 14
911 13 15
12 14 16 18 20
14 16 18 20 22 24
24681012
135791113
18 20 22 24 26 28 30
17 19 21 23 25 27 29 31
24 6 8 10 12 14 16 18
13 5 7 9 11 13 15 17 19
21 23 25 27 29 31 33 35 37
20 22 24 26 28 30 32 34 36
13579111315
2 4 6 8 10 12 14 16
15 17 19 21 23 25
246810
1357911
13 15 17 19 21
1357
2468
.183
[4.65]
.183
[4.65]
.183
[4.65]
.183
[4.65]
Size 9
Size 15
Size 21
Size 25
Size 31
Size 37
.183
[4.65]
.183
[4.65]
C
L
C
L
C
L
C
L
C
L
C
L
97
86
42
531
14 12 10
15 13 11 9
21 19 17 15 13
25 23 21 19 17 15
12108642
131197531
30 28 26 24 22 20 18
31 29 27 25 23 21 19 17
18 16 14 12 10 8 6 4 2
19 17 15 13 11 9 7 5 3 1
36 34 32 30 28 26 24 22 20
37 35 33 31 29 27 25 23 21
16 14 12 10 8 6 4 2
15 13 11 9 7 5 3 1
24 22 20 18 16 14
108642
1197531
20 18 16 14 12
8642
7531
.183
[4.65]
.183
[4.65]
.183
[4.65]
.183
[4.65]
Size 9
Size 15
Size 21
Size 25
Size 31
Size 37
Socket #1 Ref.
(Receptacle Connector)
Pin #1 Ref.
(Plug Connector)
View is of mounting surface of pin connector View is of mounting surface of socket connector
Microminiature D Connectors
MCDM Series Metal Shell Connectors
25
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Microminiature D
Connectors
1
Performance
Contact Resistance —The average
mated contact resistance is 4 milliohms,
with a maximum value of 8 milliohms,
using standard #24 solid copper leads
when measured directly behind the
crimp joints of the mated pin and socket
contacts. The average resistance value at
100 microvolts is 4.8 milliohms.
Dielectric Withstanding Voltage
(60 Hz rms room temperature) —
Solder Pots: 600 VAC at sea level;
150 VAC at 70,000 feet [21,336 m].
Wire Terminations: 750 VAC at sea level;
200 VAC at 70,000 feet [21,336m]
Vibration (Per MIL-STD-202C,
Method 204-A, Condition D) —No
discontinuity in excess of 1 microsecond
during twelve 20 minute sweeps from 10
to 2,000 CPS at .06 double amplitude or
20 G forces, whichever is less.
Corrosion Resistance (Per
MIL-STD-202C, Method 101B,
Condition B) —Both mated and
unmated samples do not exceed the
maximum allowable contact resistance
(8 milliohms) when subjected to the
48 hour salt spray test.
Durability —The contact resistance
after 500 mating cycles is less than the
maximum allowable, 8 milliohms.
Insulation Resistance —
Greater than 5,000 megohms at room
temperature for the materials listed
under “Materials”.
Maximum Current Carrying
Capacity —No. 24 contact, 3
amperes. It must be recognized,
however, that all the wires to a connector
will not carry their maximum current
under all environmental conditions due
to wire temperature.
Contact Engaging and Separation
Forces —6oz. [1.67N] maximum
(eng.); 0.5 oz. [.14N] minimum (sep.).
Temperature Range (Operating) —
Diallyl phthalate -67°F to 257°F
[-55°Cto +125°C].
Materials
Insulator —Diallyl phthalate per
MIL-M-14, Type SDG-F or Liquid
Crystal Polymer (LCP) per ASTM
D5138.
Contacts —Pin Contact: Copper alloy
and beryllium copper alloy make up the
complete construction. Socket Contact:
Copper alloy.
Body Shell —High grade aluminum
alloy.
Finishes
Contacts —Standard finish is
0.000050 [0.00127] gold over copper
flash per MIL-G-45204, Type II.
Body Shell —Electroless nickel per
AMS 2404.
Note:
Insulators are molded into their metal
shells — No bonded joint is used.
Technical & Performance
Data
The only metal shell con-
nector that mates with all
existing plastic types. This
line is ideal for external use
and other applications
requiring frequent discon-
nect and remating. When
durability and reliability are
paramount the metal shell
connector is unsurpassed —
it eliminates the need for
retrofitting wherenew metal
shell varieties must mate
with older plastic types.
Originally designed for mili-
tary applications, they are
currently used for commer-
cial requirements, including
computers.
Screw Mount
B
C
A
F
E
D
A
F
Contact #1
Pin
Pin
Contact #1
Socket
Socket
Pin
Socket
.089–.094
[2.26–2.39]
.093
[2.36]
D
Dia.
2 Plcs.
.089–.094
[2.26–2.39] Dia.
.193
[4.90]
.379
[9.63]
.180
[4.57]
.365
[9.27]
.798
[20.27]
B
.093
[2.36]
E
Microminiature D Connectors
MCDM Series Metal Shell Connectors (Continued)
26 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
PartNumber AB C D E F Avg. Weight
± .005 ± .005 ± .010 ± .010 ± .005 ± .005 lbs. ± 5%
[±.127] [±.127] [±.254] [±.254] [±.127] [±.127] [grams]
MCDM1-9P*** .780 .290 .398 .165 .208 .565 .003
19.81 7.36 10.11 4.19 5.28 14.35 1.36
MCDM1-9S*** .780 .365 .398 .165 .208 .565 .003
19.81 9.27 10.11 4.19 5.28 14.35 1.36
MCDM1-15P*** .930 .440 .548 .165 .208 .715 .004
23.62 11.18 13.92 4.19 5.28 18.16 1.81
MCDM1-15S*** .930 .515 .548 .165 .208 .715 .004
23.62 13.08 13.92 4.19 5.28 18.16 1.81
MCDM1-21P*** 1.080 .590 .698 .165 .208 .865 .005
27.43 14.99 17.73 4.19 5.28 21.97 2.26
MCDM1-21S*** 1.080 .665 .698 .165 .208 .865 .005
27.43 16.89 17.73 4.19 5.28 21.97 2.26
MCDM1-25P*** 1.180 .690 .798 .165 .208 .965 .006
29.97 17.53 20.27 4.19 5.28 24.51 2.72
MCDM1-25S*** 1.180 .765 .798 .165 .208 .965 .005
29.97 19.43 20.27 4.19 5.28 24.51 2.26
MCDM1-30P*** .930 .435 .548 .252 .295 .715 .007
23.62 11.05 13.92 6.40 7.49 18.16 3.17
MCDM1-30S*** .930 .515 .548 .252 .295 .715 .007
23.62 13.08 13.92 6.40 7.49 18.16 3.17
MCDM1-31P*** 1.330 .840 .948 .165 .208 1.115 .007
33.78 21.34 16.46 4.19 5.28 28.32 3.17
MCDM1-31S*** 1.330 .915 .948 .165 .208 1.115 .006
33.78 23.24 16.46 4.19 5.28 28.32 2.72
MCDM1-37P*** 1.480 .990 1.098 .165 .208 1.270 .007
37.59 25.15 27.89 4.19 5.28 32.26 3.17
MCDM1-37S*** 1.480 1.065 1.098 .165 .208 1.270 .007
37.59 27.05 27.89 4.19 5.28 32.26 3.17
MCDM1-51P*** 1.430 .940 1.048 .208 .250 1.215 .009
36.32 23.88 26.62 5.28 6.35 30.86 4.08
MCDM1-51S*** 1.430 1.015 1.048 .208 .250 1.215 .008
36.32 25.78 26.62 5.28 6.35 30.86 3.62
Note: Weight given is with .500 [12.7] uninsulated, solid, 24 AWG gold plated copper pigtails.
How To Specify
MCD- M1 B 37 P 6 A 1 18.0
Lead Length in Inches (min.)
X— Special, does not fit description below.
Insulation Color or Finish
1 — All white wire 4 — Gold plated 7 — Color coded per MIL-STD-681,
2 — All yellow wire 5 — Tin dipped gold plated System 1
3 — All gray wire 6 — Bare (unfinished) 8 — Special color code
9 — 10 color repeating (solid) per M83513
Wire Type
*A — Type E, 7 strand *D — Type ET, 19 strand G — 19 strand per MIL-22759/11
*B — Type ET, 7 strand F — 7 strand per MIL 22759/11 #26 AWG, #24 AWG
*C — Type E, 19 strand (#28 AWG only) L — Copper, solid
Q — Stranded per MIL-W-22759/33
*Per MIL-W-16878
Wire Size
4 — #24 5 — #25 6 — #26 8 — #28 0 — #30
Connector Series
Shell Type and Material
M1 — Metal Shell
Screw Mount
Diallyl Phthalate or LCP Insulator
Hardware (See Pages 14 and 15)
B— No Hardware
F — Float Bushing
K — Jackscrew, Slotted Head, High Profile
L — Jackscrew, Slotted Head, Low Profile
Q — Jackscrew, Allen Head, High Profile
R — Jackscrew, Allen Head, Low Profile
X — Lockscrew, Slotted Head
Y — Lockscrew, Allen Head
P — Jackpost
S— Solder pot for #26 max. stranded wire
Contact Type
P — Pin S — Socket
Layout
9, 15, 21, 25, 30, 31, 37, 51
Screw Mount (Continued)
Microminiature D Connectors
MCDM Series Metal Shell RF COMBOMATE Connectors
27
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Microminiature D
Connectors
1
Screw Mount Coaxial
Terminations
Available now —RF
Performance in standard
subminiature rectangular
connectors, with VSWR
values of 1.01 to 1.10 in
frequencies ranging in DC
to 2.3 GHz. This is the
COMBOMATE Connector.
This series of connectors
incorporates the same metal
shells and twist pin contacts
used in the widely accepted,
high reliability, MCDM Series.
The RF COMBOMATE
Connector Series will
accommodate RG 196 A/U
or RG 178 B/U coaxial cable
terminated in a unique
manner in standard, alr eady
tooled insert layouts. This
feature results in savings in
cost, time and space.
The RF COMBOMATE
Connector Series will
accommodate a maximum
of 17 RG 196 A/U or
RG 178 B/U cables in an
area of less than .225 sq.
inches [14.51 mm2]. Mixed
layouts with coaxial termina-
tions and standard AWG 24,
26 and 28 arealso immedi-
ately available in 7 different
shell sizes. The overall
envelope and mounting
dimensions of equivalent
size of COMBOMATE
Connectors are exactly the
same as the standard
MCDM Series.
C
B
A
F
E
D
Contact #1
Pin
Pin
Epoxy
Pin
.089–.094
[2.26–2.39]
.093
[2.36]
Dia.
2 Plcs.
.193
[4.90]
.379
[9.63]
.250
[6.35]Max.
Contact #1
Socket
A
F
E
.089–.094
[2.26–2.39] Dia.
B
Epoxy
.093
[2.36]
.180
[4.57]
.365
[9.27]
.250
[6.35] Max. D
Socket
Socket
Performance Data —
Coaxial Terminations
Impedance —49.0 to 51.0 Ohms.
Voltage Standing Wave Ratio
(VSWR) —1.01:1 to 1.10:1 at
frequency ranging in DC to 2.3 GHz.
Dielectric Withstanding Voltage
(60 Hz rms room temperature) —
750 VAC at sea level;
200 VAC at 70,000 feet [21,336 m].
(Actual Test Data) Crosstalk (Between Adjacent Lines)
1 to 2 2 to 3 3 to 4 4 to 5
30 MHz 60.0 db 59.8 db 60.7 db 60.0 db
100 MHz 49.1 db 48.3 db 51.7 db 50.6 db
175 MHz 42.6 db 41.4 db 47.2 db 47.0 db
500 MHz 38.0 db 38.8 db 39.5 db 40.0 db
1000 MHz 31.6 db 32.0 db 30.0 db 32.5 db
2000 MHz 22.4 db 22.5 db 22.3 db 20.8 db
3000 MHz 21.5 db 23.9 db 21.4 db 24.2 db
Insertion Loss
Sample #1 #2 #3 #4 #5
30 MHz .08 db .08 db .08 db .08 db .08 db
100 MHz .24 db .24 db .25 db .25 db .25 db
175 MHz .35 db .36 db .36 db .34 db .32 db
500 MHz .58 db .50 db .60 db .58 db .48 db
1000 MHz 1.25 db 1.33 db 1.36 db 1.35 db 1.24 db
2000 MHz 1.48 db 1.71 db 1.42 db 1.40 db 1.45 db
3000 MHz 2.66 db 2.45 db 2.74 db 2.86 db 2.84 db
Note: Verification of all test data is on file at Tyco Electronics and is
available upon request.
All test runs using RG 196 A/U.
Microminiature D Connectors
MCDM Series Metal Shell RF COMBOMATE Connectors (Continued)
28 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Part Number ABC D EF
± .005 ± .005 Max. Max. ± .005 ± .005
[± .127] [± .127] [± .127] [± .127]
MCDM3-3P** .780 .290 .408 .200 .208 .565
19.81 7.36 10.36 5.08 5.28 14.35
MCDM3-3S** .780 .365 .408 .200 .208 .565
19.81 9.27 10.36 5.08 5.28 14.35
MCDM3-5P** .930 .440 .558 .200 .208 .715
23.62 11.18 14.17 5.08 5.28 18.16
MCDM3-5S** .930 .515 .558 .200 .208 .715
23.62 13.08 14.17 5.08 5.28 18.16
MCDM3-7P** 1.080 .590 .708 .200 .208 .865
27.43 14.99 17.98 5.08 5.28 21.97
MCDM3-7S** 1.080 .665 .708 .200 .208 .865
27.43 16.89 17.98 5.08 5.28 21.97
MCDM3-8P** 1.180 .690 .808 .200 .208 .965
29.97 17.53 20.52 5.08 5.28 24.51
MCDM3-8S** 1.180 .765 .808 .200 .208 .965
29.97 19.43 20.52 5.08 5.28 24.51
MCDM3-10P** 1.330 .840 .958 .200 .208 1.115
33.78 21.34 24.33 5.08 5.28 28.32
MCDM3-10S** 1.330 .915 .958 .200 .208 1.115
33.78 23.24 24.33 5.08 5.28 28.32
MCDM3-12P** 1.480 .990 1.108 .200 .208 1.270
37.59 25.15 27.89 5.08 5.28 32.26
MCDM3-12S** 1.480 1.065 1.108 .200 .208 1.270
37.59 27.05 27.89 5.08 5.28 32.26
MCDM3-17P** 1.430 .940 1.058 .245 .250 1.215
36.32 23.88 26.87 6.22 6.35 30.86
MCDM3-17S** 1.430 1.015 1.058 .245 .250 1.215
36.32 25.78 26.87 6.22 6.35 30.86
Screw Mount Coaxial
Terminations (Continued)
How To Specify
MCD M3 7 P 3 18.0
Lead Length in Inches (min.)
Wire Size
3 — RG 196 A/U (White insulation)
2 — RG 178 B/U (Brown insulation)
X — Special, does not fit description*
Connector Series
Contact Type
P — Pin S — Socket
Layout
3, 5, 7, 8, 10, 12, 17
Maximum RF combinations using RG 196 A/U and RG 178 B/U cable
Shell Type and Material
M3 — Metal Shell
Screw Mount
Diallyl Phthalate or LCP Insulator
*Ordering Criteria: A wide variety of contact combinations, coaxial and power mixed, are available.
Contact Tyco Electronics for additional arrangement numbers.
Microminiature D Connectors
MCDM Series Metal Shell RF COMBOMATE Connectors (Continued)
29
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Microminiature D
Connectors
1
Contact Arrangement as
Viewed from the Engaging
Face of the Pin Side
3
RG196 A/U or
RG 178 B/U
8
RG196 A/U or
RG 178 B/U
12
RG196 A/U or
RG 178 B/U
17
RG196 A/U or
RG 178 B/U
Termination Pattern
10
RG196 A/U or
RG 178 B/U
1
1
1
118
35
5136
19
20 37
Shield
Center Conductor
19
13 1 16
14 25 17 31
51 1 118
69 15912 21
5
RG196 A/U or
RG 178 B/U
7
RG196 A/U or
RG 178 B/U
Note: The above contact arrangements are the maximum densities that can be obtained in each shell size when using
RG 196 A/U or RG 178 B/U cable.
Microminiature D Connectors
MCDM Series Metal Shell Connectors Panel Mounting — Cutout Dimensions
30 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Plug and Receptacle
Rear Mounted
Plug Front Mounted
Receptacle Rear Mounted
Plug and Receptacle
Front Mounted
.200
±.005
[5.08
±0.13
]
.395
±.005
[10.03
±0.13
]
.300
±.005
[7.62
±0.13
]
Panel Mounting
Dimensions — MCDM
Plug and Receptacle
Rear Mounted Plug and Receptacle
Front Mounted
Plug Front Mounted
Receptacle Rear Mounted
Front
Full
Radius
(Typ.) R
R
A
A
C
B
Figure 1
Rear
Figure 2
B
Full
Radius
(Typ.)
116/117
C
+ .005
– .000
+ 0.13
– 0.00
.089
[2.26]
+ .005
– .000
+ 0.13
– 0.00
.075
[1.90]
.015
[.381]
Max. Typ.
.089
[2.26]
Number A B C
of Fig. + .004 [+ .102] + .004 [+ .102] + .005 [+ .127]
Contacts – .000 [– .000] – .000 [– .000] – .000 [– .000]
91.412 [10.46] .177 [4.50] .570 [14.48]
2.384 [9.75] .222 [5.64] .570 [14.48]
15 1.562 [14.27] .177 [4.50] .720 [18.29]
2.534 [13.56] .222 [5.64] .720 [18.29]
21 1.712 [18.08] .177 [4.50] .870 [22.10]
2.684 [17.37] .222 [5.64] .870 [22.10]
25 1.812 [20.62] .177 [4.50] .970 [24.64]
2.784 [19.91] .222 [5.64] .970 [24.64]
31 1.962 [24.43] .177 [4.50] 1.120 [28.45]
2.934 [23.72] .222 [5.64] 1.120 [28.45]
37 11.112 [28.24] .177 [4.50] 1.270 [32.26]
21.084 [27.53] .222 [5.64] 1.270 [32.26]
51 11.062 [26.97] .224 [5.69] 1.220 [30.99]
21.034 [26.26] .264 [6.71] 1.220 [30.99]
Panel Cutout Dimensions
Screw Mounting
Note: Front mounting preferred.
Microminiature D Connectors
MIL-DTL-83513 Cross Reference
31
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Microminiature D
Connectors
1
MCK (Metal Shell)
M83513/01-A* MCK-**-B- 9PS
M83513/01-B* MCK-**-B- 15PS
M83513/01-C* MCK-**-B- 21PS
M83513/01-D* MCK-**-B- 25PS
M83513/01-E* MCK-**-B- 31PS
M83513/01-F* MCK-**-B- 37PS
M83513/01-G* MCK-**-B- 51PS
M83513/01-H* MCK-**-B-100PS
M83513/02-A* MCK-**-B- 9SS
M83513/02-B* MCK-**-B- 15SS
M83513/02-C* MCK-**-B- 21SS
M83513/02-D* MCK-**-B- 25SS
M83513/02-E* MCK-**-B- 31SS
M83513/02-F* MCK-**-B- 37SS
M83513/02-G* MCK-**-B- 51SS
M83513/02-H* MCK-**-B-100SS
M83513/03-A01* MCK-**-B- 9P6G1-18.0
M83513/03-B01* MCK-**-B- 15P6G1-18.0
M83513/03-C01* MCK-**-B- 21P6G1-18.0
M83513/03-D01* MCK-**-B- 25P6G1-18.0
M83513/03-E01* MCK-**-B- 31P6G1-18.0
M83513/03-F01* MCK-**-B- 37P6G1-18.0
M83513/03-G01* MCK-**-B- 51P6G1-18.0
M83513/03-H01* MCK-**-B-100P6G1-18.0
M83513/03-A02* MCK-**-B- 9P6G1-36.0
M83513/03-B02* MCK-**-B- 15P6G1-36.0
M83513/03-C02* MCK-**-B- 21P6G1-36.0
M83513/03-D02* MCK-**-B- 25P6G1-36.0
M83513/03-E02* MCK-**-B- 31P6G1-36.0
M83513/03-F02* MCK-**-B- 37P6G1-36.0
M83513/03-G02* MCK-**-B- 51P6G1-36.0
M83513/03-H02* MCK-**-B-100P6G1-36.0
M83513/03-A03* MCK-**-B- 9P6G9-18.0
M83513/03-B03* MCK-**-B- 15P6G9-18.0
M83513/03-C03* MCK-**-B- 21P6G9-18.0
M83513/03-D03* MCK-**-B- 25P6G9-18.0
M83513/03-E03* MCK-**-B- 31P6G9-18.0
M83513/03-F03* MCK-**-B- 37P6G9-18.0
M83513/03-G03* MCK-**-B- 51P6G9-18.0
M83513/03-H03* MCK-**-B-100P6G9-18.0
M83513/03-A04* MCK-**-B- 9P6G9-36.0
M83513/03-B04* MCK-**-B- 15P6G9-36.0
M83513/03-C04* MCK-**-B- 21P6G9-36.0
M83513/03-D04* MCK-**-B- 25P6G9-36.0
M83513/03-E04* MCK-**-B- 31P6G9-36.0
M83513/03-F04* MCK-**-B- 37P6G9-36.0
M83513/03-G04* MCK-**-B- 51P6G9-36.0
M83513/03-H04* MCK-**-B-100P6G9-36.0
M83513/03-A05* MCK-**-B- 9P5L4-0.5
M83513/03-B05* MCK-**-B- 15P5L4-0.5
M83513/03-C05* MCK-**-B- 21P5L4-0.5
M83513/03-D05* MCK-**-B- 25P5L4-0.5
M83513/03-E05* MCK-**-B- 31P5L4-0.5
M83513/03-F05* MCK-**-B- 37P5L4-0.5
M83513/03-G05* MCK-**-B- 51P5L4-0.5
M83513/03-H05* MCK-**-B-100P5L4-0.5
M83513/03-A06* MCK-**-B- 9P5L4-1.0
M83513/03-B06* MCK-**-B- 15P5L4-1.0
M83513/03-C06* MCK-**-B- 21P5L4-1.0
M83513/03-D06* MCK-**-B- 25P5L4-1.0
Military Part No. MICRODOT Part No. M83513/03-E06* MCK-**-B- 31P5L4-1.0
M83513/03-F06* MCK-**-B- 37P5L4-1.0
M83513/03-G06* MCK-**-B- 51P5L4-1.0
M83513/03-H06* MCK-**-B-100P5L4-1.0
M83513/03-A07* MCK-**-B- 9P5L5-0.5
M83513/03-B07* MCK-**-B- 15P5L5-0.5
M83513/03-C07* MCK-**-B- 21P5L5-0.5
M83513/03-D07* MCK-**-B- 25P5L5-0.5
M83513/03-E07* MCK-**-B- 31P5L5-0.5
M83513/03-F07* MCK-**-B- 37P5L5-0.5
M83513/03-G07* MCK-**-B- 51P5L5-0.5
M83513/03-H07* MCK-**-B-100P5L5-0.5
M83513/03-A08* MCK-**-B- 9P5L5-1.0
M83513/03-B08* MCK-**-B- 15P5L5-1.0
M83513/03-C08* MCK-**-B- 21P5L5-1.0
M83513/03-D08* MCK-**-B- 25P5L5-1.0
M83513/03-E08* MCK-**-B- 31P5L5-1.0
M83513/03-F08* MCK-**-B- 37P5L5-1.0
M83513/03-G08* MCK-**-B- 51P5L5-1.0
M83513/03-H08* MCK-**-B-100P5L5-1.0
M83513/03-A09* MCK-**-B- 9P6Q1-18.0
M83513/03-B09* MCK-**-B- 15P6Q1-18.0
M83513/03-C09* MCK-**-B- 21P6Q1-18.0
M83513/03-D09* MCK-**-B- 25P6Q1-18.0
M83513/03-E09* MCK-**-B- 31P6Q1-18.0
M83513/03-F09* MCK-**-B- 37P6Q1-18.0
M83513/03-G09* MCK-**-B- 51P6Q1-18.0
M83513/03-H09* MCK-**-B-100P6Q1-18.0
M83513/03-A10* MCK-**-B- 9P6Q1-36.0
M83513/03-B10* MCK-**-B- 15P6Q1-36.0
M83513/03-C10* MCK-**-B- 21P6Q1-36.0
M83513/03-D10* MCK-**-B- 25P6Q1-36.0
M83513/03-E10* MCK-**-B- 31P6Q1-36.0
M83513/03-F10* MCK-**-B- 37P6Q1-36.0
M83513/03-G10* MCK-**-B- 51P6Q1-36.0
M83513/03-H10* MCK-**-B-100P6Q1-36.0
M83513/03-A11* MCK-**-B- 9P6Q9-18.0
M83513/03-B11* MCK-**-B- 15P6Q9-18.0
M83513/03-C11* MCK-**-B- 21P6Q9-18.0
M83513/03-D11* MCK-**-B- 25P6Q9-18.0
M83513/03-E11* MCK-**-B- 31P6Q9-18.0
M83513/03-F11* MCK-**-B- 37P6Q9-18.0
M83513/03-G11* MCK-**-B- 51P6Q9-18.0
M83513/03-H11* MCK-**-B-100P6Q9-18.0
M83513/03-A12* MCK-**-B- 9P6Q9-36.0
M83513/03-B12* MCK-**-B- 15P6Q9-36.0
M83513/03-C12* MCK-**-B- 21P6Q9-36.0
M83513/03-D12* MCK-**-B- 25P6Q9-36.0
M83513/03-E12* MCK-**-B- 31P6Q9-36.0
M83513/03-F12* MCK-**-B- 37P6Q9-36.0
M83513/03-G12* MCK-**-B- 51P6Q9-36.0
M83513/03-H12* MCK-**-B-100P6Q9-36.0
M83513/03-A13* MCK-**-B- 9P6G1-72.0
M83513/03-B13* MCK-**-B- 1 5P6G1-72.0
M83513/03-C13* MCK-**-B- 21P6G1-72.0
M83513/03-D13* MCK-**-B- 25P6G1-72.0
M83513/03-E13* MCK-**-B- 31P6G1-72.0
M83513/03-F13* MCK-**-B- 37P6G1-72.0
M83513/03-G13* MCK-**-B- 51P6G1-72.0
M83513/03-H13* MCK-**-B-100P6G1-72.0
Military Part No. MICRODOT Part No. M83513/03-A14* MCK-**-B- 9P6G9-72.0
M83513/03-B14* MCK-**-B- 15P6G9-72.0
M83513/03-C14* MCK-**-B- 21P6G9-72.0
M83513/03-D14* MCK-**-B- 25P6G9-72.0
M83513/03-E14* MCK-**-B- 31P6G9-72.0
M83513/03-F14* MCK-**-B- 37P6G9-72.0
M83513/03-G14* MCK-**-B- 51P6G9-72.0
M83513/03-H14* MCK-**-B-100P6G9-72.0
M83513/03-A15* MCK-**-B- 9P6Q1-72.0
M83513/03-B15* MCK-**-B- 15P6Q1-72.0
M83513/03-C15* MCK-**-B- 21P6Q1-72.0
M83513/03-D15* MCK-**-B- 25P6Q1-72.0
M83513/03-E15* MCK-**-B- 31P6Q1-72.0
M83513/03-F15* MCK-**-B- 37P6Q1-72.0
M83513/03-G15* MCK-**-B- 51P6Q1-72.0
M83513/03-H15* MCK-**-B-100P6Q1-72.0
M83513/03-A16* MCK-**-B- 9P6Q9-72.0
M83513/03-B16* MCK-**-B- 15P6Q9-72.0
M83513/03-C16* MCK-**-B- 21P6Q9-72.0
M83513/03-D16* MCK-**-B- 25P6Q9-72.0
M83513/03-E16* MCK-**-B- 31P6Q9-72.0
M83513/03-F16* MCK-**-B- 37P6Q9-72.0
M83513/03-G16* MCK-**-B- 51P6Q9-72.0
M83513/03-H16* MCK-**-B-100P6Q9-72.0
M83513/04-A01* MCK-**-B- 9S6G1-18.0
M83513/04-B01* MCK-**-B- 15S6G1-18.0
M83513/04-C01* MCK-**-B- 21S6G1-18.0
M83513/04-D01* MCK-**-B- 25S6G1-18.0
M83513/04-E01* MCK-**-B- 31S6G1-18.0
M83513/04-F01* MCK-**-B- 37S6G1-18.0
M83513/04-G01* MCK-**-B- 51S6G1-18.0
M83513/04-H01* MCK-**-B-100S6G1-18.0
M83513/04-A02* MCK-**-B- 9S6G1-36.0
M83513/04-B02* MCK-**-B- 15S6G1-36.0
M83513/04-C02* MCK-**-B- 21S6G1-36.0
M83513/04-D02* MCK-**-B- 25S6G1-36.0
M83513/04-E02* MCK-**-B- 31S6G1-36.0
M83513/04-F02* MCK-**-B- 37S6G1-36.0
M83513/04-G02* MCK-**-B- 51S6G1-36.0
M83513/04-H02* MCK-**-B-100S6G1-36.0
M83513/04-A03* MCK-**-B- 9S6G9-18.0
M83513/04-B03* MCK-**-B- 15S6G9-18.0
M83513/04-C03* MCK-**-B- 21S6G9-18.0
M83513/04-D03* MCK-**-B- 25S6G9-18.0
M83513/04-E03* MCK-**-B- 31S6G9-18.0
M83513/04-F03* MCK-**-B- 37S6G9-18.0
M83513/04-G03* MCK-**-B- 51S6G9-18.0
M83513/04-H03* MCK-**-B-100S6G9-18.0
M83513/04-A04* MCK-**-B- 9S6G9-36.0
M83513/04-B04* MCK-**-B- 15S6G9-36.0
M83513/04-C04* MCK-**-B- 21S6G9-36.0
M83513/04-D04* MCK-**-B- 25S6G9-36.0
M83513/04-E04* MCK-**-B- 31S6G9-36.0
M83513/04-F04* MCK-**-B- 37S6G9-36.0
M83513/04-G04* MCK-**-B- 51S6G9-36.0
M83513/04-H04* MCK-**-B-100S6G9-36.0
M83513/04-A05* MCK-**-B- 9S5L4-0.5
M83513/04-B05* MCK-**-B- 15S5L4-0.5
M83513/04-C05* MCK-**-B- 21S5L4-0.5
M83513/04-D05* MCK-**-B- 25S5L4-0.5
Military Part No. MICRODOT Part No.
Microminiature D Connectors
MIL-DTL-83513 Cross Reference (Continued)
32 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
MCK (Metal Shell)MCK (Metal Shell) (Continued)
M83513/04-E05* MCK-**-B- 31S5L4-0.5
M83513/04-F05* MCK-**-B- 37S5L4-0.5
M83513/04-G05* MCK-**-B- 51S5L4-0.5
M83513/04-H05* MCK-**-B-100S5L4-0.5
M83513/04-A06* MCK-**-B- 9S5L4-1.0
M83513/04-B06* MCK-**-B- 15S5L4-1.0
M83513/04-C06* MCK-**-B- 21S5L4-1.0
M83513/04-D06* MCK-**-B- 25S5L4-1.0
M83513/04-E06* MCK-**-B- 31S5L4-1.0
M83513/04-F06* MCK-**-B- 37S5L4-1.0
M83513/04-G06* MCK-**-B- 51S5L4-1.0
M83513/04-H06* MCK-**-B-100S5L4-1.0
M83513/04-A07* MCK-**-B- 9S5L5-0.5
M83513/04-B07* MCK-**-B- 15S5L5-0.5
M83513/04-C07* MCK-**-B- 21S5L5-0.5
M83513/04-D07* MCK-**-B- 25S5L5-0.5
M83513/04-E07* MCK-**-B- 31S5L5-0.5
M83513/04-F07* MCK-**-B- 37S5L5-0.5
M83513/04-G07* MCK-**-B- 51S5L5-0.5
M83513/04-H07* MCK-**-B-100S5L5-0.5
M83513/04-A08* MCK-**-B- 9S5L5-1.0
M83513/04-B08* MCK-**-B- 15S5L5-1.0
M83513/04-C08* MCK-**-B- 21S5L5-1.0
M83513/04-D08* MCK-**-B- 25S5L5-1.0
M83513/04-E08* MCK-**-B- 31S5L5-1.0
M83513/04-F08* MCK-**-B- 37S5L5-1.0
M83513/04-G08* MCK-**-B- 51S5L5-1.0
M83513/04-H08* MCK-**-B-100S5L5-1.0
M83513/04-A09* MCK-**-B- 9S6Q1-18.0
M83513/04-B09* MCK-**-B- 15S6Q1-18.0
M83513/04-C09* MCK-**-B- 21S6Q1-18.0
Military Part No. MICRODOT Part No. M83513/04-D09* MCK-**-B- 25S6Q1-18.0
M83513/04-E09* MCK-**-B- 31S6Q1-18.0
M83513/04-F09* MCK-**-B- 37S6Q1-18.0
M83513/04-G09* MCK-**-B- 51S6Q1-18.0
M83513/04-H09* MCK-**-B-100S6Q1-18.0
M83513/04-A10* MCK-**-B- 9S6Q1-36.0
M83513/04-B10* MCK-**-B- 15S6Q1-36.0
M83513/04-C10* MCK-**-B- 21S6Q1-36.0
M83513/04-D10* MCK-**-B- 25S6Q1-36.0
M83513/04-E10* MCK-**-B- 31S6Q1-36.0
M83513/04-F10* MCK-**-B- 37S6Q1-36.0
M83513/04-G10* MCK-**-B- 51S6Q1-36.0
M83513/04-H10* MCK-**-B-100S6Q1-36.0
M83513/04-A11* MCK-**-B- 9S6Q9-18.0
M83513/04-B11* MCK-**-B- 15S6Q9-18.0
M83513/04-C11* MCK-**-B- 21S6Q9-18.0
M83513/04-D11* MCK-**-B- 25S6Q9-18.0
M83513/04-E11* MCK-**-B- 31S6Q9-18.0
M83513/04-F11* MCK-**-B- 37S6Q9-18.0
M83513/04-G11* MCK-**-B- 51S6Q9-18.0
M83513/04-H11* MCK-**-B-100S6Q9-18.0
M83513/04-A12* MCK-**-B- 9S6Q9-36.0
M83513/04-B12* MCK-**-B- 15S6Q9-36.0
M83513/04-C12* MCK-**-B- 21S6Q9-36.0
M83513/04-D12* MCK-**-B- 25S6Q9-36.0
M83513/04-E12* MCK-**-B- 31S6Q9-36.0
M83513/04-F12* MCK-**-B- 37S6Q9-36.0
M83513/04-G12* MCK-**-B- 51S6Q9-36.0
M83513/04-H12* MCK-**-B-100S6Q9-36.0
M83513/04-A13* MCK-**-B- 9S6G1-72.0
M83513/04-B13* MCK-**-B- 15S6G1-72.0
Military Part No. MICRODOT Part No. M83513/04-C13* MCK-**-B- 21S6G1-72.0
M83513/04-D13* MCK-**-B- 25S6G1-72.0
M83513/04-E13* MCK-**-B- 31S6G1-72.0
M83513/04-F13* MCK-**-B- 37S6G1-72.0
M83513/04-G13* MCK-**-B- 51S6G1-72.0
M83513/04-H13* MCK-**-B-100S6G1-72.0
M83513/04-A14* MCK-**-B- 9S6G9-72.0
M83513/04-B14* MCK-**-B- 15S6G9-72.0
M83513/04-C14* MCK-**-B- 21S6G9-72.0
M83513/04-D14* MCK-**-B- 25S6G9-72.0
M83513/04-E14* MCK-**-B- 31S6G9-72.0
M83513/04-F14* MCK-**-B- 37S6G9-72.0
M83513/04-G14* MCK-**-B- 51S6G9-72.0
M83513/04-H14* MCK-**-B-100S6G9-72.0
M83513/04-A15* MCK-**-B- 9S6Q1-72.0
M83513/04-B15* MCK-**-B- 15S6Q1-72.0
M83513/04-C15* MCK-**-B- 21S6Q1-72.0
M83513/04-D15* MCK-**-B- 25S6Q1-72.0
M83513/04-E15* MCK-**-B- 31S6Q1-72.0
M83513/04-F15* MCK-**-B- 37S6Q1-72.0
M83513/04-G15* MCK-**-B- 51S6Q1-72.0
M83513/04-H15* MCK-**-B-100S6Q1-72.0
M83513/04-A16* MCK-**-B- 9S6Q9-72.0
M83513/04-B16* MCK-**-B- 15S6Q9-72.0
M83513/04-C16* MCK-**-B- 21S6Q9-72.0
M83513/04-D16* MCK-**-B- 25S6Q9-72.0
M83513/04-E16* MCK-**-B- 31S6Q9-72.0
M83513/04-F16* MCK-**-B- 37S6Q9-72.0
M83513/04-G16* MCK-**-B- 51S6Q9-72.0
M83513/04-H16* MCK-**-B-100S6Q9-72.0
Military Part No. MICRODOT Part No.
M83513/05-02 “A. HD, J/S, L.F,#2”
M83513/05-12 “A. HD, J/S, L.F,#4”
M83513/05-03 “A. HD, J/S,H.F, #2”
M83513/05-13 “A. HD, J/S, H.F. #4”
Military Part No. MICRODOT Part No.
Hardware
M83513/05-05 “S. HD, J/S, L.F,#2”
M83513/05-15 “S. HD, J/S, L.F,#4”
M83513/05-06 “S. HD, J/S, H.F, #2”
M83513/05-16 “S. HD, J/S, H.F, #4”
Military Part No. MICRODOT Part No. M83513/05-07 “JACKPOSTASSY #2”
M83513/05-17 “JACKPOSTASSY,#4”
Military Part No. MICRODOT Part No.
MCDR (Plastic Shell)
M83513/06-A MCDR3-B- 9PS
M83513/06-B MCDR3-B-15PS
M83513/06-C MCDR3-B-21PS
M83513/06-D MCDR3-B-25PS
M83513/06-E MCDR3-B-31PS
M83513/06-F MCDR3-B-37PS
M83513/06-G MCDR3-B-51PS
M83513/07-A MCDR3-B- 9SS
M83513/07-B MCDR3-B-15SS
M83513/07-C MCDR3-B-21SS
M83513/07-D MCDR3-B-25SS
M83513/07-E MCDR3-B-31SS
M83513/07-F MCDR3-B-37SS
Military Part No. MICRODOT Part No. M83513/07-G MCDR3-B-51SS
M83513/08-A01 MCDR3-B- 9P6G1-18.0
M83513/08-B01 MCDR3-B-15P6G1-18.0
M83513/08-C01 MCDR3-B-21P6G1-18.0
M83513/08-D01 MCDR3-B-25P6G1-18.0
M83513/08-E01 MCDR3-B-31P6G1-18.0
M83513/08-F01 MCDR3-B-37P6G1-18.0
M83513/08-G01 MCDR3-B-51P6G1-18.0
M83513/08-A02 MCDR3-B- 9P6G1-36.0
M83513/08-B02 MCDR3-B-15P6G1-36.0
M83513/08-C02 MCDR3-B-21P6G1-36.0
M83513/08-D02 MCDR3-B-25P6G1-36.0
M83513/08-E02 MCDR3-B-31P6G1-36.0
Military Part No. MICRODOT Part No. M83513/08-F02 MCDR3-B-37P6G1-36.0
M83513/08-G02 MCDR3-B-51P6G1-36.0
M83513/08-A03 MCDR3-B- 9P6G9-18.0
M83513/08-B03 MCDR3-B-15P6G9-18.0
M83513/08-C03 MCDR3-B-21P6G9-18.0
M83513/08-D03 MCDR3-B-25P6G9-18.0
M83513/08-E03 MCDR3-B-31P6G9-18.0
M83513/08-F03 MCDR3-B-37P6G9-18.0
M83513/08-G03 MCDR3-B-51P6G9-18.0
M83513/08-A04 MCDR3-B- 9P6G9-36.0
M83513/08-B04 MCDR3-B-15P6G9-36.0
M83513/08-C04 MCDR3-B-21P6G9-36.0
M83513/08-D04 MCDR3-B-25P6G9-36.0
Military Part No. MICRODOT Part No.
*C = Cadmium or N = Nickel (space applications only)
**C2 = Cadmium or N1 = Nickel (space applications only)
Microminiature D Connectors
MIL-DTL-83513 Cross Reference (Continued)
33
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Microminiature D
Connectors
1
MCDR (Plastic Shell) (Continued)
M83513/08-E04 MCDR3-B-31P6G9-36.0
M83513/08-F04 MCDR3-B-37P6G9-36.0
M83513/08-G04 MCDR3-B-51P6G9-36.0
M83513/08-A05 MCDR3-B- 9P5L4-0.5
M83513/08-B05 MCDR3-B-15P5L4-0.5
M83513/08-C05 MCDR3-B-21P5L4-0.5
M83513/08-D05 MCDR3-B-25P5L4-0.5
M83513/08-E05 MCDR3-B-31P5L4-0.5
M83513/08-F05 MCDR3-B-37P5L4-0.5
M83513/08-G05 MCDR3-B-51P5L4-0.5
M83513/08-A06 MCDR3-B- 9P5L4-1.0
M83513/08-B06 MCDR3-B-15P5L4-1.0
M83513/08-C06 MCDR3-B-21P5L4-1.0
M83513/08-D06 MCDR3-B-25P5L4-1.0
M83513/08-E06 MCDR3-B-31P5L4-1.0
M83513/08-F06 MCDR3-B-37P5L4-1.0
M83513/08-G06 MCDR3-B-51P5L4-1.0
M83513/08-A07 MCDR3-B- 9P5L5-0.5
M83513/08-B07 MCDR3-B-15P5L5-0.5
M83513/08-C07 MCDR3-B-21P5L5-0.5
M83513/08-D07 MCDR3-B-25P5L5-0.5
M83513/08-E07 MCDR3-B-31P5L5-0.5
M83513/08-F07 MCDR3-B-37P5L5-0.5
M83513/08-G07 MCDR3-B-51P5L5-0.5
M83513/08-A08 MCDR3-B- 9P5L5-1.0
M83513/08-B08 MCDR3-B-15P5L5-1.0
M83513/08-C08 MCDR3-B-21P5L5-1.0
M83513/08-D08 MCDR3-B-25P5L5-1.0
M83513/08-E08 MCDR3-B-31P5L5-1.0
M83513/08-F08 MCDR3-B-37P5L5-1.0
M83513/08-G08 MCDR3-B-51P5L5-1.0
M83513/08-A09 MCDR3-B- 9P6Q1-18.0
M83513/08-B09 MCDR3-B-15P6Q1-18.0
M83513/08-C09 MCDR3-B-21P6Q1-18.0
M83513/08-D09 MCDR3-B-25P6Q1-18.0
M83513/08-E09 MCDR3-B-31P6Q1-18.0
M83513/08-F09 MCDR3-B-37P6Q1-18.0
M83513/08-G09 MCDR3-B-51P6Q1-18.0
M83513/08-A10 MCDR3-B- 9P6Q1-36.0
M83513/08-B10 MCDR3-B-15P6Q1-36.0
M83513/08-C10 MCDR3-B-21P6Q1-36.0
M83513/08-D10 MCDR3-B-25P6Q1-36.0
M83513/08-E10 MCDR3-B-31P6Q1-36.0
M83513/08-F10 MCDR3-B-37P6Q1-36.0
M83513/08-G10 MCDR3-B-51P6Q1-36.0
M83513/08-A11 MCDR3-B- 9P6Q9-18.0
M83513/08-B11 MCDR3-B-15P6Q9-18.0
M83513/08-C11 MCDR3-B-21P6Q9-18.0
M83513/08-D11 MCDR3-B-25P6Q9-18.0
M83513/08-E11MCDR3-B-31P6Q9-18.0
M83513/08-F11 MCDR3-B-37P6Q9-18.0
M83513/08-G11 MCDR3-B-51P6Q9-18.0
M83513/08-A12 MCDR3-B- 9P6Q9-36.0
M83513/08-B12 MCDR3-B-15P6Q9-36.0
M83513/08-C12 MCDR3-B-21P6Q9-36.0
M83513/08-D12 MCDR3-B-25P6Q9-36.0
M83513/08-E12 MCDR3-B-31P6Q9-36.0
M83513/08-F12 MCDR3-B-37P6Q9-36.0
M83513/08-G12 MCDR3-B-51P6Q9-36.0
M83513/08-A13 MCDR3-B- 9P6G1-72.0
Military Part No. MICRODOT Part No. M83513/08-B13 MCDR3-B-15P6G1-72.0
M83513/08-C13 MCDR3-B-21P6G1-72.0
M83513/08-D13 MCDR3-B-25P6G1-72.0
M83513/08-E13 MCDR3-B-31P6G1-72.0
M83513/08-F13 MCDR3-B-37P6G1-72.0
M83513/08-G13 MCDR3-B-51P6G1-72.0
M83513/08-A14 MCDR3-B- 9P6G9-72.0
M83513/08-B14 MCDR3-B-15P6G9-72.0
M83513/08-C14 MCDR3-B-21P6G9-72.0
M83513/08-D14 MCDR3-B-25P6G9-72.0
M83513/08-E14 MCDR3-B-31P6G9-72.0
M83513/08-F14 MCDR3-B-37P6G9-72.0
M83513/08-G14 MCDR3-B-51P6G9-72.0
M83513/08-A15 MCDR3-B- 9P6Q1-72.0
M83513/08-B15 MCDR3-B-15P6Q1-72.0
M83513/08-C15 MCDR3-B-21P6Q1-72.0
M83513/08-D15 MCDR3-B-25P6Q1-72.0
M83513/08-E15 MCDR3-B-31P6Q1-72.0
M83513/08-F15 MCDR3-B-37P6Q1-72.0
M83513/08-G15 MCDR3-B-51P6Q1-72.0
M83513/08-A16 MCDR3-B- 9P6Q9-72.0
M83513/08-B16 MCDR3-B-15P6Q9-72.0
M83513/08-C16 MCDR3-B-21P6Q9-72.0
M83513/08-D16 MCDR3-B-25P6Q9-72.0
M83513/08-E16 MCDR3-B-31P6Q9-72.0
M83513/08-F16 MCDR3-B-37P6Q9-72.0
M83513/08-G16 MCDR3-B-51P6Q9-72.0
M83513/09-A01 MCDR3-B- 9S6G1-18.0
M83513/09-B01 MCDR3-B-15S6G1-18.0
M83513/09-C01 MCDR3-B-21S6G1-18.0
M83513/09-D01 MCDR3-B-25S6G1-18.0
M83513/09-E01 MCDR3-B-31S6G1-18.0
M83513/09-F01 MCDR3-B-37S6G1-18.0
M83513/09-G01 MCDR3-B-51S6G1-18.0
M83513/09-A02 MCDR3-B- 9S6G1-36.0
M83513/09-B02 MCDR3-B-15S6G1-36.0
M83513/09-C02 MCDR3-B-21S6G1-36.0
M83513/09-D02 MCDR3-B-25S6G1-36.0
M83513/09-E02 MCDR3-B-31S6G1-36.0
M83513/09-F02 MCDR3-B-37S6G1-36.0
M83513/09-G02 MCDR3-B-51S6G1-36.0
M83513/09-A03 MCDR3-B- 9S6G9-18.0
M83513/09-B03 MCDR3-B- 15S6G9-18.0
M83513/09-C03 MCDR3-B- 21S6G9-18.0
M83513/09-D03 MCDR3-B-25S6G9-18.0
M83513/09-E03 MCDR3-B-31S6G9-18.0
M83513/09-F03 MCDR3-B-37S6G9-18.0
M83513/09-G03 MCDR3-B-51S6G9-18.0
M83513/09-A04 MCDR3-B- 9S6G9-36.0
M83513/09-B04 MCDR3-B-15S6G9-36.0
M83513/09-C04 MCDR3-B-21S6G9-36.0
M83513/09-D04 MCDR3-B-25S6G9-36.0
M83513/09-E04 MCDR3-B-31S6G9-36.0
M83513/09-F04 MCDR3-B-37S6G9-36.0
M83513/09-G04 MCDR3-B-51S6G9-36.0
M83513/09-A05 MCDR3-B- 9S5L4-0.5
M83513/09-B05 MCDR3-B-15S5L4-0.5
M83513/09-C05 MCDR3-B-21S5L4-0.5
M83513/09-D05 MCDR3-B-25S5L4-0.5
M83513/09-E05 MCDR3-B-31S5L4-0.5
Military Part No. MICRODOT Part No. M83513/09-F05 MCDR3-B-37S5L4-0.5
M83513/09-G05 MCDR3-B-51S5L4-0.5
M83513/09-A06 MCDR3-B- 9S5L4-1.0
M83513/09-B06 MCDR3-B-15S5L4-1.0
M83513/09-C06 MCDR3-B-21S5L4-1.0
M83513/09-D06 MCDR3-B-25S5L4-1.0
M83513/09-E06 MCDR3-B-31S5L4-1.0
M83513/09-F06 MCDR3-B-37S5L4-1.0
M83513/09-G06 MCDR3-B-51S5L4-1.0
M83513/09-A07 MCDR3-B- 9S5L5-0.5
M83513/09-B07 MCDR3-B-15S5L5-0.5
M83513/09-C07 MCDR3-B-21S5L5-0.5
M83513/09-D07 MCDR3-B-25S5L5-0.5
M83513/09-E07 MCDR3-B-31S5L5-0.5
M83513/09-F07 MCDR3-B-37S5L5-0.5
M83513/09-G07 MCDR3-B-51S5L5-0.5
M83513/09-A08 MCDR3-B- 9S5L5-1.0
M83513/09-B08 MCDR3-B-15S5L5-1.0
M83513/09-C08 MCDR3-B-21S5L5-1.0
M83513/09-D08 MCDR3-B-25S5L5-1.0
M83513/09-E08 MCDR3-B-31S5L5-1.0
M83513/09-F08 MCDR3-B-37S5L5-1.0
M83513/09-G08 MCDR3-B-51S5L5-1.0
M83513/09-A09 MCDR3-B- 9S6Q1-18.0
M83513/09-B09 MCDR3-B-15S6Q1-18.0
M83513/09-C09 MCDR3-B-21S6Q1-18.0
M83513/09-D09 MCDR3-B-25S6Q1-18.0
M83513/09-E09 MCDR3-B-31S6Q1-18.0
M83513/09-F09 MCDR3-B-37S6Q1-18.0
M83513/09-G09 MCDR3-B-51S6Q1-18.0
M83513/09-A10 MCDR3-B- 9S6Q1-36.0
M83513/09-B10 MCDR3-B-15S6Q1-36.0
M83513/09-C10 MCDR3-B-21S6Q1-36.0
M83513/09-D10 MCDR3-B-25S6Q1-36.0
M83513/09-E10 MCDR3-B-31S6Q1-36.0
M83513/09-F10 MCDR3-B-37S6Q1-36.0
M83513/09-G10 MCDR3-B-51S6Q1-36.0
M83513/09-A11 MCDR3-B- 9S6Q9-18.0
M83513/09-B11 MCDR3-B-15S6Q9-18.0
M83513/09-C11 MCDR3-B-21S6Q9-18.0
M83513/09-D11MCDR3-B-25S6Q9-18.0
M83513/09-E11MCDR3-B-31S6Q9-18.0
M83513/09-F11 MCDR3-B-37S6Q9-18.0
M83513/09-G11MCDR3-B-51S6Q9-18.0
M83513/09-A12 MCDR3-B- 9S6Q9-36.0
M83513/09-B12 MCDR3-B-15S6Q9-36.0
M83513/09-C12 MCDR3-B-21S6Q9-36.0
M83513/09-D12 MCDR3-B-25S6Q9-36.0
M83513/09-E12 MCDR3-B-31S6Q9-36.0
M83513/09-F12 MCDR3-B-37S6Q9-36.0
M83513/09-G12 MCDR3-B-51S6Q9-36.0
M83513/09-A13 MCDR3-B- 9S6G1-72.0
M83513/09-B13 MCDR3-B-15S6G1-72.0
M83513/09-C13 MCDR3-B-21S6G1-72.0
M83513/09-D13 MCDR3-B-25S6G1-72.0
M83513/09-E13 MCDR3-B-31S6G1-72.0
M83513/09-F13 MCDR3-B-37S6G1-72.0
M83513/09-G13 MCDR3-B-51S6G1-72.0
M83513/09-A14 MCDR3-B- 9S6G9-72.0
M83513/09-B14 MCDR3-B-15S6G9-72.0
Military Part No. MICRODOT Part No.
Microminiature D Connectors
MIL-DTL-83513 Cross Reference (Continued)
34 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
MCDR (Plastic Shell) (Continued)
M83513/15-H03*N MCK-**-B-100SRT1B
M83513/15-H03*P MCK-**-P-100SRT1B
M83513/16-A01*N MCK-**-B- 9PRT3
M83513/16-B01*N MCK-**-B- 15PRT3
M83513/16-C01*N MCK-**-B- 21PRT3
M83513/16-D01*N MCK-**-B- 25PRT3
M83513/16-E01*N MCK-**-B- 31PRT3
M83513/16-F01*N MCK-**-B- 37PRT3
M83513/16-A01*P MCK-**-P- 9PRT3
M83513/16-B01*P MCK-**-P- 15PRT3
M83513/16-C01*P MCK-**-P- 21PRT3
M83513/16-D01*P MCK-**-P- 25PRT3
M83513/16-E01*P MCK-**-P- 31PRT3
M83513/16-F01*P MCK-**-P- 37PRT3
M83513/16-A02*N MCK-**-B- 9PRT3A
M83513/16-B02*N MCK-**-B- 15PRT3A
M83513/16-C02*N MCK-**-B- 21PRT3A
M83513/16-D02*N MCK-**-B- 25PRT3A
M83513/16-E02*N MCK-**-B- 31PRT3A
M83513/16-F02*N MCK-**-B- 37PRT3A
M83513/16-A02*P MCK-**-P- 9PRT3A
M83513/16-B02*P MCK-**-P- 15PRT3A
M83513/16-C02*P MCK-**-P- 21PRT3A
M83513/16-D02*P MCK-**-P- 25PRT3A
M83513/16-E02*P MCK-**-P- 31PRT3A
M83513/16-F02*P MCK-**-P- 37PRT3A
M83513/16-A03*N MCK-**-B- 9PRT3B
M83513/16-B03*N MCK-**-B- 15PRT3B
M83513/16-C03*N MCK-**-B- 21PRT3B
M83513/16-D03*N MCK-**-B- 25PRT3B
M83513/16-E03*N MCK-**-B- 31PRT3B
M83513/16-F03*N MCK-**-B- 37PRT3B
M83513/16-A03*P MCK-**-P- 9PRT3B
M83513/16-B03*P MCK-**-P- 15PRT3B
M83513/16-C03*P MCK-**-P- 21PRT3B
M83513/16-D03*P MCK-**-P- 25PRT3B
M83513/16-E03*P MCK-**-P- 31PRT3B
M83513/16-F03*P MCK-**-P- 37PRT3B
M83513/17-G01*N MCK-**-B- 51PRT3
M83513/17-G01*P MCK-**-P- 51PRT3
M83513/17-G02*N MCK-**-B- 51PRT3A
M83513/17-G02*P MCK-**-P- 51PRT3A
M83513/17-G03*N MCK-**-B- 51PRT3B
M83513/17-G03*P MCK-**-P- 51PRT3B
M83513/18-H01*N MCK-**-B-100PRT3
M83513/18-H01*P MCK-**-P-100PRT3
M83513/18-H02*N MCK-**-B-100PRT3A
Military Part No. MICRODOT Part No.
M83513/09-C14 MCDR3-B-21S6G9-72.0
M83513/09-D14 MCDR3-B-25S6G9-72.0
M83513/09-E14 MCDR3-B-31S6G9-72.0
M83513/09-F14 MCDR3-B-37S6G9-72.0
M83513/09-G14 MCDR3-B-51S6G9-72.0
M83513/09-A15 MCDR3-B- 9S6Q1-72.0
M83513/09-B15 MCDR3-B-15S6Q1-72.0
Military Part No. MICRODOT Part No.
M83513/12-H03*P MCK-**-P-100PRT1B
M83513/13-A01*N MCK-**-B- 9SRT1
M83513/13-B01*N MCK-**-B- 15SRT1
M83513/13-C01*N MCK-**-B- 21SRT1
M83513/13-D01*N MCK-**-B- 25SRT1
M83513/13-E01*N MCK-**-B- 31SRT1
M83513/13-F01*N MCK-**-B- 37SRT1
M83513/13-A01*P MCK-**-P- 9SRT1
M83513/13-B01*P MCK-**-P- 15SRT1
M83513/13-C01*P MCK-**-P- 21SRT1
M83513/13-D01*P MCK-**-P- 25SRT1
M83513/13-E01*P MCK-**-P- 31SRT1
M83513/13-F01*P MCK-**-P- 37SRT1
M83513/13-A02*N MCK-**-B- 9SRT1A
M83513/13-B02*N MCK-**-B- 15SRT1A
M83513/13-C02*N MCK-**-B- 21SRT1A
M83513/13-D02*N MCK-**-B- 25SRT1A
M83513/13-E02*N MCK-**-B- 31SRT1A
M83513/13-F02*N MCK-**-B- 37SRT1A
M83513/13-A02*P MCK-**-P- 9SRT1A
M83513/13-B02*P MCK-**-P- 15SRT1A
M83513/13-C02*P MCK-**-P- 21SRT1A
M83513/13-D02*P MCK-**-P- 25SRT1A
M83513/13-E02*P MCK-**-P- 31SRT1A
M83513/13-F02*P MCK-**-P- 37SRT1A
M83513/13-A03*N MCK-**-B- 9SRT1B
M83513/13-B03*N MCK-**-B- 15SRT1B
M83513/13-C03*N MCK-**-B- 21SRT1B
M83513/13-D03*N MCK-**-B- 25SRT1B
M83513/13-E03*N MCK-**-B- 31SRT1B
M83513/13-F03*N MCK-**-B- 37SRT1B
M83513/13-A03*P MCK-**-P- 9SRT1B
M83513/13-B03*P MCK-**-P- 15SRT1B
M83513/13-C03*P MCK-**-P- 21SRT1B
M83513/13-D03*P MCK-**-P- 25SRT1B
M83513/13-E03*P MCK-**-P- 31SRT1B
M83513/13-F03*P MCK-**-P- 37SRT1B
M83513/14-G01*N MCK-**-B- 51SRT1
M83513/14-G01*P MCK-**-P- 51SRT1
M83513/14-G02*N MCK-**-B- 51SRT1A
M83513/14-G02*P MCK-**-P- 51SRT1A
M83513/14-G03*N MCK-**-B- 51SRT1B
M83513/14-G03*P MCK-**-P- 51SRT1B
M83513/15-H01*N MCK-**-B-100SRT1
M83513/15-H01*P MCK-**-P-100SRT1
M83513/15-H02*N MCK-**-B-100SRT1A
M83515/15-H02*P MCK-**-P-100SRT1A
Military Part No. MICRODOT Part No.
M83513/10-A01*N MCK-**-B- 9PRT1
M83513/10-B01*N MCK-**-B- 15PRT1
M83513/10-C01*N MCK-**-B- 21PRT1
M83513/10-D01*N MCK-**-B- 25PRT1
M83513/10-E01*N MCK-**-B- 31PRT1
M83513/10-F01*N MCK-**-B- 37PRT1
M83513/10-A01*P MCK-**-P- 9PRT1
M83513/10-B01*P MCK-**-P- 15PRT1
M83513/10-C01*P MCK-**-P- 21PRT1
M83513/10-D01*P MCK-**-P- 25PRT1
M83513/10-E01*P MCK-**-P- 31PRT1
M83513/10-F01*P MCK-**-P- 37PRT1
M83513/10-A02*N MCK-**-B- 9PRT1A
M83513/10-B02*N MCK-**-B- 15PRT1A
M83513/10-C02*N MCK-**-B- 21PRT1A
M83513/10-D02*N MCK-**-B- 25PRT1A
M83513/10-E02*N MCK-**-B- 31PRT1A
M83513/10-F02*N MCK-**-B- 37PRT1A
M83513/10-A02*P MCK-**-P- 9PRT1A
M83513/10-B02*P MCK-**-P- 15PRT1A
M83513/10-C02*P MCK-**-P- 21PRT1A
M83513/10-D02*P MCK-**-P- 25PRT1A
M83513/10-E02*P MCK-**-P- 31PRT1A
M83513/10-F02*P MCK-**-P- 37PRT1A
M83513/10-A03*N MCK-**-B- 9PRT1B
M83513/10-B03*N MCK-**-B- 15PRT1B
M83513/10-C03*N MCK-**-B- 21PRT1B
M83513/10-D03*N MCK-**-B- 25PRT1B
M83513/10-E03*N MCK-**-B- 31PRT1B
M83513/10-F03*N MCK-**-B- 37PRT1B
M83513/10-A03*P MCK-**-P- 9PRT1B
M83513/10-B03*P MCK-**-P- 15PRT1B
M83513/10-C03*P MCK-**-P- 21PRT1B
M83513/10-D03*P MCK-**-P- 25PRT1B
M83513/10-E03*P MCK-**-P- 31PRT1B
M83513/10-F03*P MCK-**-P- 37PRT1B
M83513/11-G01*N MCK-**-B- 51PRT1
M83513/11-G01*P MCK-**-P- 51PRT1
M83513/11-G02*N MCK-**-B- 51PRT1A
M83513/11-G02*P MCK-**-P- 51PRT1A
M83513/11-G03*N MCK-**-B- 51PRT1B
M83513/11-G03*P MCK-**-P- 51PRT1B
M83513/12-H01*N MCK-**-B-100PRT1
M83513/12-H01*P MCK-**-P-100PRT1
M83513/12-H02*N MCK-**-B-100PRT1A
M83513/12-H02*P MCK-**-P-100PRT1A
M83513/12-H03*N MCK-**-B-100PRT1B
Military Part No. MICRODOT Part No.
MCK (Metal Shell)
M83513/09-C16 MCDR3-B-21S6Q9-72.0
M83513/09-D16 MCDR3-B-25S6Q9-72.0
M83513/09-E16 MCDR3-B-31S6Q9-72.0
M83513/09-F16 MCDR3-B-37S6Q9-72.0
M83513/09-G16 MCDR3-B-51S6Q9-72.0
Military Part No. MICRODOT Part No.
M83513/09-C15 MCDR3-B-21S6Q1-72.0
M83513/09-D15 MCDR3-B-25S6Q1-72.0
M83513/09-E15 MCDR3-B-31S6Q1-72.0
M83513/09-F15 MCDR3-B-37S6Q1-72.0
M83513/09-G15 MCDR3-B-51S6Q1-72.0
M83513/09-A16 MCDR3-B- 9S6Q9-72.0
M83513/09-B16 MCDR3-B-15S6Q9-72.0
Military Part No. MICRODOT Part No.
Microminiature D Connectors
MIL-DTL-83513 Cross Reference (Continued)
35
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Microminiature D
Connectors
1
MCK (Metal Shell) (Continued)
M83515/18-H02*P MCK-**-P-100PRT3A
M83513/18-H03*N MCK-**-B-100PRT3B
M83513/18-H03*P MCK-**-P-100PRT3B
M83513/19-A01*N MCK-**-B- 9SRT3
M83513/19-B01*N MCK-**-B- 15SRT3
M83513/19-C01*N MCK-**-B- 21SRT3
M83513/19-D01*N MCK-**-B- 25SRT3
M83513/19-E01*N MCK-**-B- 31SRT3
M83513/19-F01*N MCK-**-B- 37SRT3
M83513/19-A01*P MCK-**-P- 9SRT3
M83513/19-B01*P MCK-**-P- 15SRT3
M83513/19-C01*P MCK-**-P- 21SRT3
M83513/19-D01*P MCK-**-P- 25SRT3
M83513/19-E01*P MCK-**-P- 31SRT3
M83513/19-F01*P MCK-**-P- 37SRT3
M83513/19-A02*N MCK-**-B- 9SRT3A
M83513/19-B02*N MCK-**-B- 15SRT3A
M83513/19-C02*N MCK-**-B- 21SRT3A
M83513/19-D02*N MCK-**-B- 25SRT3A
M83513/19-E02*N MCK-**-B- 31SRT3A
M83513/19-F02*N MCK-**-B- 37SRT3A
M83513/19-A02*P MCK-**-P- 9SRT3A
M83513/19-B02*P MCK-**-P- 15SRT3A
M83513/19-C02*P MCK-**-P- 21SRT3A
M83513/19-D02*P MCK-**-P- 25SRT3A
M83513/19-E02*P MCK-**-P- 31SRT3A
M83513/19-F02*P MCK-**-P- 37SRT3A
M83513/19-A03*N MCK-**-B- 9SRT3B
M83513/19-B03*N MCK-**-B- 15SRT3B
M83513/19-C03*N MCK-**-B- 21SRT3B
M83513/19-D03*N MCK-**-B- 25SRT3B
M83513/19-E03*N MCK-**-B- 31SRT3B
M83513/19-F03*N MCK-**-B- 37SRT3B
M83513/19-A03*P MCK-**-P- 9SRT3B
M83513/19-B03*P MCK-**-P- 15SRT3B
M83513/19-C03*P MCK-**-P- 21SRT3B
M83513/19-D03*P MCK-**-P- 25SRT3B
M83513/19-E03*P MCK-**-P- 31SRT3B
M83513/19-F03*P MCK-**-P- 37SRT3B
M83513/20-G01*N MCK-**-B- 51SRT3
M83513/20-G01*P MCK-**-P- 51SRT3
M83513/20-G02*N MCK-**-B- 51SRT3A
M83513/20-G02*P MCK-**-P- 51SRT3A
M83513/20-G03*N MCK-**-B- 51SRT3B
M83513/20-G03*P MCK-**-P- 51SRT3B
M83513/21-H01*N MCK-**-B-100SRT3
M83513/21-H01*P MCK-**-P-100SRT3
M83513/21-H02*N MCK-**-B-100SRT3A
M83515/21-H02*P MCK-**-P-100SRT3A
Military Part No. MICRODOT Part No. M83513/21-H03*N MCK-**-B-100SRT3B
M83513/21-H03*P MCK-**-P-100SRT3B
M83513/22-A01*N MCK-**-B- 9PST1
M83513/22-B01*N MCK-**-B- 15PST1
M83513/22-C01*N MCK-**-B- 21PST1
M83513/22-D01*N MCK-**-B- 25PST1
M83513/22-E01*N MCK-**-B- 31PST1
M83513/22-F01*N MCK-**-B- 37PST1
M83513/22-A01*P MCK-**-P- 9PST1
M83513/22-B01*P MCK-**-P- 15PST1
M83513/22-C01*P MCK-**-P- 21PST1
M83513/22-D01*P MCK-**-P- 25PST1
M83513/22-E01*P MCK-**-P- 31PST1
M83513/22-F01*P MCK-**-P- 37PST1
M83513/22-A02*N MCK-**-B- 9PST1A
M83513/22-B02*N MCK-**-B- 15PST1A
M83513/22-C02*N MCK-**-B- 21PST1A
M83513/22-D02*N MCK-**-B- 25PST1A
M83513/22-E02*N MCK-**-B- 31PST1A
M83513/22-F02*N MCK-**-B- 37PST1A
M83513/22-A02*P MCK-**-P- 9PST1A
M83513/22-B02*P MCK-**-P- 15PST1A
M83513/22-C02*P MCK-**-P- 21PST1A
M83513/22-D02*P MCK-**-P- 25PST1A
M83513/22-E02*P MCK-**-P- 31PST1A
M83513/22-F02*P MCK-**-P- 37PST1A
M83513/22-A03*N MCK-**-B- 9PST1B
M83513/22-B03*N MCK-**-B- 15PST1B
M83513/22-C03*N MCK-**-B- 21PST1B
M83513/22-D03*N MCK-**-B- 25PST1B
M83513/22-E03*N MCK-**-B- 31PST1B
M83513/22-F03*N MCK-**-B- 37PST1B
M83513/22-A03*P MCK-**-P- 9PST1B
M83513/22-B03*P MCK-**-P- 15PST1B
M83513/22-C03*P MCK-**-P- 21PST1B
M83513/22-D03*P MCK-**-P- 25PST1B
M83513/22-E03*P MCK-**-P- 31PST1B
M83513/22-F03*P MCK-**-P- 37PST1B
M83513/23-G01*N MCK-**-B- 51PST1
M83513/23-G01*P MCK-**-P- 51PST1
M83513/23-G02*N MCK-**-B- 51PST1A
M83513/23-G02*P MCK-**-P- 51PST1A
M83513/23-G03*N MCK-**-B- 51PST1B
M83513/23-G03*P MCK-**-P- 51PST1B
M83513/24-H01*N MCK-**-B-100PST1
M83513/24-H01*P MCK-**-P-100PST1
M83513/24-H02*N MCK-**-B-100PST1A
M83515/24-H02*P MCK-**-P-100PST1A
M83513/24-H03*N MCK-**-B-100PST1B
Military Part No. MICRODOT Part No. M83513/24-H03*P MCK-**-P-100PST1B
M83513/25-A01*N MCK-**-B- 9SST1
M83513/25-B01*N MCK-**-B- 15SST1
M83513/25-C01*N MCK-**-B- 21SST1
M83513/25-D01*N MCK-**-B- 25SST1
M83513/25-E01*N MCK-**-B- 31SST1
M83513/25-F01*N MCK-**-B- 37SST1
M83513/25-A01*P MCK-**-P- 9SST1
M83513/25-B01*P MCK-**-P- 15SST1
M83513/25-C01*P MCK-**-P- 21SST1
M83513/25-D01*P MCK-**-P- 25SST1
M83513/25-E01*P MCK-**-P- 31SST1
M83513/25-F01*P MCK-**-P- 37SST1
M83513/25-A02*N MCK-**-B- 9SST1A
M83513/25-B02*N MCK-**-B- 15SST1A
M83513/25-C02*N MCK-**-B- 21SST1A
M83513/25-D02*N MCK-**-B- 25SST1A
M83513/25-E02*N MCK-**-B- 31SST1A
M83513/25-F02*N MCK-**-B- 37SST1A
M83513/25-A02*P MCK-**-P- 9SST1A
M83513/25-B02*P MCK-**-P- 15SST1A
M83513/25-C02*P MCK-**-P- 21SST1A
M83513/25-D02*P MCK-**-P- 25SST1A
M83513/25-E02*P MCK-**-P- 31SST1A
M83513/25-F02*P MCK-**-P- 37SST1A
M83513/25-A03*N MCK-**-B- 9SST1B
M83513/25-B03*N MCK-**-B- 15SST1B
M83513/25-C03*N MCK-**-B- 21SST1B
M83513/25-D03*N MCK-**-B- 25SST1B
M83513/25-E03*N MCK-**-B- 31SST1B
M83513/25-F03*N MCK-**-B- 37SST1B
M83513/25-A03*P MCK-**-P- 9SST1B
M83513/25-B03*P MCK-**-P- 15SST1B
M83513/25-C03*P MCK-**-P- 21SST1B
M83513/25-D03*P MCK-**-P- 25SST1B
M83513/25-E03*P MCK-**-P- 31SST1B
M83513/25-F03*P MCK-**-P- 37SST1B
M83513/26-G01*N MCK-**-B- 51SST1
M83513/26-G01*P MCK-**-P- 51SST1
M83513/26-G02*N MCK-**-B- 51SST1A
M83513/26-G02*P MCK-**-P- 51SST1A
M83513/26-G03*N MCK-**-B- 51SST1B
M83513/26-G03*P MCK-**-P- 51SST1B
M83513/27-H01*N MCK-**-B-100SST1
M83513/27-H01*P MCK-**-P-100SST1
M83513/27-H02*N MCK-**-B-100SST1A
M83515/27-H02*P MCK-**-P-100SST1A
M83513/27-H03*N MCK-**-B-100SST1B
M83513/27-H03*P MCK-**-P-100SST1B
Military Part No. MICRODOT Part No.
*C = Cadmium or N = Nickel (space applications only)
**C2 = Cadmium or N1 = Nickel (space applications only)
Microminiature D Connectors
Engineering Notes
36 Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com aremetric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Rectangular Connectors
37
Introduction
Twist Pin contact High
Density Microminiature
Connectors described in
this catalog comprise a
complete contact system
which is adaptable to a
numerous variety of form
factors. Precise contact
alignment, with extremely
low engaging forces, results
from the manner in which
the Twist Pin contact
system is packaged —
by constructing the male
contact as a breathing
helical spring, electrical
contact is achieved at many
points around the periphery
of the pin bundle.
Featured in this catalog is
the twist pin contact line,
which accommodates
round wire and Flat
Conductor Cable (FCC),
EdgeboardConnectors.
Applications requiring
frequent mating and discon-
nect call for the metal shell
connector version. This
style connector promotes
high durability and reliability.
Designed for both military
and commercial applica-
tions, this latest innovation
is especially well-suited to
use in external conditions.
This catalog also features
light-weight plastic
connectors in a strip (MCS)
format as well as JACKMATE
Connectors (MCJ Series)
format for small package
application requiring high
reliability.
Edgeboard applications are
covered in this catalog with
aspecial High Density
Standard Module (HDSM)
Connector as well as
MIL-DTL-55302 (MCEM)
Connectors. The high
mating forces of these larger
connectors aregreatly
reduced with the use of the
low force twist pins and
sockets which are standard
for this product line.
Product Facts
nDesigned for both military
and commercial applications
nWell-suited for external
conditions
nPrecise contact alignment
with extremely low engaging
forces
nProduct offering consists of
metal shell, plastic shell,
panel mount, printed circuit
board and strip connectors
nMetal shell connector
promotes high durability
and reliability
Rectangular
Connectors
2
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Rectangular Connectors
38
Twist Pin Contact Data
Twist Pin — 24 gauge
Pin and Socket Contacts
The contact spring member
normally found in socket
contacts has been eliminat-
ed by creating a breathing
helical spring principle on
the pin contact — smaller,
more durable contacts
can be manufactured
economically. Wire range 24-36 AWG solid & stranded.
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Rectangular Connectors
39
Rectangular
Connectors
2
MCE Series Plastic Shell Edgeboard Connectors
Plastic Shell Edge Board
Connectors
Designed for commercial
applications requiring
frequent disconnect and
connect, including data
recorders and computers.
Mother board connector
can be ordered to fit any
pattern on your circuit
board.
This new connector features
the proven twist pin contact
with precision contact align-
ment with extremely low
engaging forces.
Units are available with con-
tacts as few as 40 and as
many as 110. Wire sizes 28
through 24, any type of plat-
ing or color coding, any
kind of wire termination
including wirewrap — a
high degree of flexibility for
your military or commercial
application.
Two hexagonal polarizing
keys can provide up to 36
different key combinations
are supplied.
40Contacts
Technical & Performance Data — Twist Pin Plastic Shell Connectors
Electrical
Contact Resistance —The average
mated contact resistance is 4 milliohms,
with a maximum value of 8 milliohms,
using standard 24 AWG solid copper
leads when measured directly behind the
crimp joints of the mated pin and socket
contacts. The average resistance value at
100 microvolts is 4.8 milliohms.
Dielectric Withstanding
Voltage —800 VAC RMS at sea level
(600 for solder pots); 200 VAC RMS at
70,000 feet [21,336m] (150 for solder
pots).
Corrosion Resistance (Per MIL-
STD-202C, Method 101B, Condition
B) — Both mated and unmated samples
do not exceed the maximum allowable
contact resistance (8 milliohms) when
subjected to the 48 hour salt spray test.
Durability —The contact resistance
after 500 mating cycles is less than the
maximum allowable, 8 milliohms.
Insulation Resistance — Greater than
5,000 megohms at room temperature.
Maximum Current Carrying
Capacity —No. 24 contact 3 amperes.
It must be recognized however, that all the
wires to a connector will not carry their
maximum current under all environmen-
tal conditions due to wire temperature.
Mechanical
Contact Engaging & Separation
Forces —8.0 oz. max. [2.24N] (eng.),
0.5 oz. min.[.14N] (sep.)
Environmental
TemperatureRange (Operating) —
-67°Fto 257°F[-55° C to +125°C].
Vibration (Per MIL-STD-202C,
Method 204A, Condition D) —No
discontinuity in excess of 1 µ sec. dur-
ing twelve 20 minute sweeps from 10 to
2000 CPS at .06 double amplitude or 20
Gforces, whichever is less.
Materials
Insulator —Liquid Crystal Polymer
(LCP) per ASTM D5138 or
Polyphenylene Sulfide per
MIL-M-24519.
Contacts —Pin-contact: Copper alloy
and beryllium copper alloy make up the
complete construction. Socket contact:
Copper alloy.
Hardware —Corrosion resistant
stainless steel.
Finishes
Insulator —None.
Contacts —Standard finish is
0.000050 [0.00127] gold over copper
flash per MIL-G-45204, Type II.
Hardware —Passivated per QQ-P-35.
C
A
.071–.076
[1.80–1.93]
B
A
A
#24 AWG Copper Wire
.250
[6.35]
.250
[6.35]
Max.
Typ.
.100
[2.54]
Solder Dip Typ.
Min.
.2 00
±.015
[5.08
±.381
]
Typ.
Epoxy
Insulator
Socket Contact/
Lead Assembly
Section A-A
.250
[6.35]
.450
[11.43]
.030
[.762]Max.
Polarization Key Location
2 Plcs.
.2 75
[6.99]
2 Plcs.
Ø .093–.098 Thru .187
[2.36–2.49Thru 4.75]
(2 Plcs.)
(Far ear only)
.300
[7.62]
.180
[4.57]
.075
[1.91]
.050
[1.27]
Ø.187
[4.75]Thru
2 Plcs.
(Near Ear Only)
B4
B3
B2
B1
A1
A2
A3
A4
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Rectangular Connectors
40
MCE Series Plastic Shell Edgeboard Connectors (Continued)
Mother Board (Pin Side)
.050
[1.27] Typ.
.075
[1.91]
.050
[1.27]
.100
[2.54] Typ.
.075
[1.91] Typ.
A
B
C
A
A
B
Polarization Key Location
2 Plcs.
.250
[6.35]
Ø.091–.098
[2.31–2.49]
2 Plcs.
B4
B3
B2
B1
A1
A2
A3
A4
Section A-A
Epoxy
25 AWG Copper
Wire, Gold Plated,
Solder Dipped
Insulator
Pin Contact/
Lead Assembly
.150
[3.81] Typ.
.250–.300
[6.35–7.62] Typ.
Detail B
.325–.375
[8.26–9.53] Typ.
.225
[5.72]
#2-56 UNC-2B Thd.
Hex Polarizing Key
2 Supplied (Loose Packed)
Daughter Board(Socket Side)
#2-56 UNC-2B Thd.
Hex Polarizing Key
2 Supplied (Loose Packed)
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Rectangular Connectors
41
Rectangular
Connectors
2
MCE Series Plastic Shell Edgeboard Connectors (Continued)
Dimensions for .062 [1.57] PC Board
No. of ABC
Contacts ±.010 ± .005 Basic
[± .254] [± .127]
401.750 1.500 .950
44.45 38.10 24.13
44 1.850 1.600 1.050
46.99 40.64 26.67
80 2.750 2.500 1.950
69.85 63.50 49.53
110 3.500 3.250 2.700
88.90 82.55 68.58
Notes: For PC Boards of different widths, consult Tyco Electronics.
How To Specify
MCE R1 40 P 6 L 4 0.5Lead Length in Inches (min.)
X — Special, does not fit description below.
Insulation Color or Finish
1 — All white wire 4 — Gold plated 7 — Color coded per
2 — All yellow wire 5 — Tin dipped gold plated MIL-STD-681, System 1
3 — All gray wire 6 — Bare (unfinished) 8 — Special color code
9 — Ten solid color repeating
(starts with black)
Wire Size
4-24 AWG 5-25 AWG 6-26AWG 8-28 AWG 0-30 AWG
Connector Series
Material
R1 — Liquid Crystal Polymer or
Polyphenylene Sulfide
Layout
40, 44, 80, 110
Contact Type
P — Pin (Mother Board Connector)
S — Socket (Daughter Board Connector)
Z — Wire layout as shown on page 40.
S — Solder pots 26 AWG max.
Wire Type
*A — Type E, 7 strand *D — Type ET, 19 strand G — 19 strand per MIL-22759/11
*B — Type ET, 7 strand F — 7 strand per MIL-22759/11 26 AWG, 24 AWG
*C — Type E, 19 strand (#28 AWG only) L — Copper, solid
Q — Stranded per MIL-W-22759/33
*Per MIL-W-16878
Mounting —Holes on the Daughter Board side can be modified.
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Rectangular Connectors
42
MCEM Series Metal Shell Edgeboard Connectors
Metal Shell Edge Board
Connectors
nMeets MIL-DTL-55302
performance requirements
nLayouts 128 and 184 are QPL
to slash sheets 120, 121,
122 and 123
nConnectors are available in
40, 44, 80, 110, 128, 152,
and 184 positions
nUtilizes low force twist pins
and our low force sockets.
Mating forces in the 3 to 4
oz. [.83 to 1.11N] range per
contact are typical with low
force pin and low force
socket
nDesigned for surface
mounting and through-the-
boardmounting
nAvailable termination
nMother board (pin side) —
cactus bend
nDaughter board (socket
side) — coke bottle,
right-angle bend to “A”
or “B” side
nSolder pots, and variety
of other wire terminations
for pin and socket
connectors available at
customer’srequest
nTwo hexagonal polarizing
keys (per MIL-DTL-55302
slash sheet 124) are
provided. Jackscrew
hardware is available. For
programmable keying/
jacking modifications
consult Tyco Electronics
In addition to the plastic
versions of the 2 piece
edgeboardconnectors, a
metal shell assembly is
designed and tooled. The
metal shells are made of
aluminum alloy per QQ-A-
591. The insertmaterial is
Diallyl phthalate,
Polyphenylene sulfide
(Ryton) or Liquid Crystal
Polymer (LCP). The techni-
cal and performance data is
essentially the same as that
shown for the MCDM Series
on page 25. These are
rugged, durable connectors
and are ideal for use in
areas of high density pack-
aging and wherefrequent
connect and disconnects
are required. Designed
initially for applications in
airborne data recorders,
computers and associated
equipment in navigational
systems. The mother board
connector can be ordered
to fit any patternon the
circuit board. The units can
also be provided with con-
tacts on .100 [2.54] spacing
which results in .100 [2.54]
grid pattern.
Performance Data
Electrical
Contact Resistance —The average
mated contact resistance is 4 milliohms,
with a maximum value of 8 milliohms.
The average resistance value at 100
microvolts is 4.8 milliohms.
Dielectric Withstanding Voltage —
800 VAC RMS at sea level (600 for
solder pots); 200 VAC RMS at 70,000
feet [21,336m] (150 for solder pots).
Durability —Less than the maximum
allowable, 8 milliohms after 500 mating
cycles.
Insulation Resistance — Greater than
5,000 megohms at room ambient tem-
perature.
Maximum Current Carrying
Capacity —No. 24 contact 3 amperes.
Mechanical
Contact Engaging & Separation
Forces —5.0 oz. max. [1.39N] (eng.),
0.5 oz. min. [.14N] (sep.).
Environmental
Temperature Range —
-67°F to 302°F [-55° C to +150°C] for
Diallyl Phthalate; -67°F to 257°F [-55°
Cto +125°C] for Polyphenylene Sulfide.
Vibration —No discontinuity in
excess of 1 µ sec. during twelve 20
minute sweeps from 10 to 2000 CPS at
.06 double amplitude or 20 G forces,
whichever is less.
Materials and Finish
Shells —High grade aluminum alloy,
electroless nickel plated per AMS 2404.
Insulator —Diallyl Phthalate per MIL-
M-14, Type SDG-F (for 128 & 184);
Polyphenylene Sulfide per MIL-M-
24519 (for 40, 44, 80, 110 & 152), or
Liquid Crystal Polymer per ASTM
D5138.
Contacts —Pin (low force): beryllium
and OFHC copper,gold plated. Socket
(low force): Copper alloy,gold plated.
Hardware —Corrosion resistant
stainless steel passivated.
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Rectangular Connectors
43
Rectangular
Connectors
2
MCEM Series Metal Shell Edgeboard Connectors (Continued)
Mother Board (Pin Side)
40, 44, 80, 110 &
128
Positions
No. of AB
Contacts ± .010 ± .005
[± .254] [± .127]
40 1.750 1.500
44.45 38.10
44 1.850 1.600
46.99 40.64
80 2.750 2.500
69.85 63.50
110 3.500 3.250
88.90 82.55
128 3.950 3.700
100.33 93.98
Note: For PC Boards of different widths, consult
Tyco Electronics.
Dimensions for .062 [1.57] PC Board
Items in bold italic are qualified to MIL-DTL-55302.
Configuration shown is per MIL-DTL-55302/120.
Section A-A
.325–.375
[8.26–9.53] Typ.
.260–.300
[6.60–7.62] Typ.
Polarizing Key Location
2 Plcs.
#2-56 UNC-2B Thd.
Pin Contact/Lead Assy.
Insulator Assy.
Epoxy
25 AWG Copper
Wire, Gold Plated,
Solder Dipped
Hex Polarizing Key
2 Supplied (Loose Packed)
A
A
A
B
.400
[10.16]
.050
[1.27]
.050
[1.27] .250
[6.35]
Ø .091–.098
[2.31–2.49]
.100
[2.54] Typ.
Typ.
.075
[1.91]
Typ.
.075
[1.91]
Typ.
.050
[1.27] Typ.
B4
B3
A1
A2
A3
A4
B2
B1
Thru
2 Plcs.
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Rectangular Connectors
44
MCEM Series Metal Shell Edgeboard Connectors (Continued)
Daughter Board
(Socket Side)
40, 44, 80, 110 &
128
Positions
MCE M1 128 L 6 L 4 0.5Lead Length in Inches (min.)
Z — Wire layout as illustrated.
Insulation Color or Finish
1 — All white wire 4 — Gold plated 7— Color coded per
2— All yellow wire 5—Tin dipped gold plated MIL-STD-681, System 1
3— All gray wire 6—Bare (unfinished) 8—Special color code
9—Ten solid color repeating
(starts with black)
Wire Size
4–24 AWG 5–25AWG 6–26 AWG 8–28 AWG 0–30AWG
Connector Series
Material
M1 — Metal Shell
Layout
40, 44, 80,110,128,152, 184
Contact Type
L—Low ForcePin (Mother BoardConnector)
SL — Low ForceSocket* (Daughter BoardConnector)
X—Special,does not fit description below.
S—Solder pots for 26 AWG max.
Wire Type
*A — TypeE,7strand *D — TypeET, 19strand G — 19strand per MIL-C-22759/11
*B — TypeET, 7strand F — 7strand per MIL-C-22759/11 26 AWG, 24 AWG
*C — TypeE, 19strand (#28 AWG only) L—Copper, solid
Q—Stranded per MIL-W-22759/33
*Per MIL-W-16878
Items in bold italic are qualified to MIL-DTL-55302.
Configuration shown is per MIL-DTL-55302/121. Polarization – Hexagonal hardware is supplied with connector.
Mounting — Standard mounting holes are shown. Consult Tyco Electronics for modifications.
How To Specify
.125
[3.18]
Section B-B
Section A-A
Retaining Pin
4 Supplied
(Loose Packed)
Polarizing Key
2 Supplied
(Loose Packed)
2 Plcs.
.060
[1.52] 3Plcs.
.030
[0.76] Max.
.250
[6.35] Max.
.050
[1.27] Typ.
Typ.
.250
[6.35]
.050
[1.27] .050
[1.27]
2 Plcs.
.180
[4.57]
2 Plcs.
.330
[8.38]
2 Plcs.
Retaining Pin Holes
4 Plcs.
Polarizing Key Location
2 Plcs.
.275
[6.99]
.150
[3.81] Min.
Solder Dip Typ.
.071
[1.80]
.200
±.015
[5.08
±.381
]Min.
at B
Epoxy
Insulator Assy.
Skt. Contact/
Lead Assy.
24AWG
Copper Wire,
Gold Plated
Ø.187
[4.75] Thru 1 Wall
Ø.091–.098
[2.31–2.49]
C’Bore Ø.187 [4.75] x
.045 [1.14] Deep
(A Side Only)
.071–.076
[1.80–1.93]
2 Plcs.
.250
[6.35]
B
A
B
B2
A2 A1
B1
A
A
B
Thru Hole
2 Plcs.
Note: Board thickness .070 [1.78] Max.
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Rectangular Connectors
45
Rectangular
Connectors
2
MCEM Series Metal Shell Edgeboard Connectors (Continued)
Mother Board (Pin Side)
152 &
184
Positions
A
B
C
.250
[6.35]
.270
[6.86]
.400
[10.16]
Retaining Pin Hole
4 Plcs.
.343
[8.71] .500
[1.27]
B/2
.050
[1.27]
.075
[1.91]
Polarizing Key Location
2 Plcs.
A
A
A
B
B4
B3 B2
B1
A1
A2
A3
A4
Typ.
D
2 Plcs
.075
[1.91]
.250
[6.35]
.700
[17.78]
.242
[6.15]
.500
[12.70]
Ø.187Thru
[4.75] 3 Plcs.
(B Side Only)
.125
[3.18] .060
[1.52]
3 Plcs.
.071
[1.80]
.343
[8.71]
Min.
Retaining Pin Hole
4 Plcs.
Polarizing Key Locations
2 Plcs.
A
B
A
B
B
A
C
B3 B2
B1
B4
A4
A3 A1
A2
Typ.
.050
[1.27]Typ.
2 Plcs.
2 Plcs.
2 Plcs. DB/2
Ø.091-.098[2.31-2.49] Thru C'Bore
Ø.187[4.75] x .045 [1.14], 3 Plcs.,
(A Side Only)
Section B-B
Daughter Board(Socket Side)
152 &
184
Positions
No. of ABCD
Contacts ± .010 ± .005 Basic Basic
[± .254] [± .127]
152 4.550 4.300 4.750 1.850
115.57 109.22 120.65 46.99
184 5.800 5.550 5.000 2.250
147.32 140.97 127.00 57.15
.250–.300
[6.35–7.62].325–.375
[8.26–9.53]
.075
[1.91]
25 AWG
Copper Wire,
Gold Plated,
Solder Dipped
Insulator
Subassembly
#2-56 UNC-2B Thd.
Hex Polarizing Key
2Supplied (Loose Packed)
Section A-A
B2B1 A1
A2
Pin Contact/
Lead Assembly
.075
[1.91]Typ.Typ.
Typ.
Typ.
.200
[5.08]
.030
[.762]
.053
[1.35]
Min. at B
.250
[6.35]
24 AWG
Copper Wire,
Gold Plated
Section A-A
Polarizing Key
2 Supplied
(Loose Packed)
Retaining Pin
4 Supplied
(Loose Packed)
Max.
Typ.
Max.
Typ.
Epoxy
Skt. Contact/
Lead Assy.
Insulator
Assy.
.150
[3.81]
Min.
Typ.
Solder Dip
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Rectangular Connectors
46
JACKMATE MCJ(M) Series Plastic (Metal) Shell Center Jackscrew Connectors
10 & 14 Contact Layout
.075
[1.91]
.165
[4.19]
.050
[1.27]Typ.
.570
[14.00]
.285
[7.24]
30
.165
[4.19]
.235
[5.97]
.075
[1.91]
.050
[1.27]
.470
[11.94]
Typ.
30
Bushing
Guide Pin
2 Plcs.
.120
[3.05]
Jackscrew
(.050 hex wrench
req'd to turn screw)
.300
[7.62]
JACKMATE Connectors are
the first Twist Pin contact
assemblies designed to
accommodate center
jackscrews that provide
jacking action when mating
or unmating the connectors.
Although the units were
initially developed for high
density cord-to-cordor
in-line applications, either
plug or receptacle can be
adapted to a PC board. The
jacking hardware consist of
athreaded bushing and a
captivated jackscrew which
are made of corrosion
resistant stainless steel
and are molded into the
JACKMATE Connector
Insulator.
The twist pin contacts are
on .050 [1.27] center-to-
center linear spacing and
contact terminations are
available in solid wire or
stranded wire. There is a
high degree of flexibility
with this JACKMATE con-
nector design for commer-
cial or military applications.
Available om MCJ(M) Series
Plastic (Metal) Shells.
10 Layout14 Layout Receptacle Plug
JACKMATE Technical & Performance Data for Plastic Shell
Electrical
Contact Resistance —The average
mated contact resistance is 4 milliohms,
with a maximum value of 8 milliohms,
using standard24 AWG solid copper
leads when measured directly behind the
crimp joints of the mated pin and socket
contacts. The average resistance value at
100 microvolts is 4.8 milliohms.
Dielectric Withstanding Voltage
(60 Hz rms room temperature) —
Solder Pots: 600 VAC at sea level; 150
VAC at 70,000 feet [21,336m]
Wire Terminations: 750 VAC at sea level;
200 VAC at 70,000 feet [21,336m].
Corrosion Resistance (Per MIL-STD-
202C, Method 101B, Condition B) —
Both mated and unmated samples do not
exceed the maximum allowable contact
resistance (8 milliohms) when subjected
to the 48 hour salt spray test.
Durability —The contact resistance
after 500 mating cycles is less than the
maximum allowable, 8 milliohms.
Insulation Resistance — Greater than
5,000 megohms at room temperature for
the materials listed under “Materials”.
Maximum Current Carrying
Capacity —No. 24 contact 3 amperes.
It must be recognized, however,that all
the wires to a connector will not carry
their maximum current under all
environmental conditions due to wire
temperature.
Mechanical
Contact Engaging & Separation
Forces —8.0 oz. max. [2.22N] (eng.),
0.5 oz. min. [.14N] (sep.).
Environmental
TemperatureRange (Operating) —
-67°Fto 257°F [-55° C to 125°C].
Vibration (Per MIL-STD-202C,
Method 204-A, Condition D) —No
discontinuity in excess of 1 µsec. dur-
ing twelve 20 minute sweeps from 10 to
2000 CPS at .06 double amplitude or 20
Gforces, whichever is less.
Materials
Insulator —Glass filled Nylon Type 6.
Contacts —Pin contact: copper alloy
and beryllium copper alloy make up the
complete construction; Socket contact:
copper alloy.
Hardware —Corrosive resistant stain-
less steel.
Finishes
Contacts —Standard finish is
0.000050 [0.00127] gold over copper
flash per MIL-G-45204, Type II.
Hardware—Passivated Per QQ-P-35.
JACKMATE MCJ Series Plastic Shell Center Jackscrew Connectors
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Rectangular Connectors
47
Rectangular
Connectors
2
JACKMATE MCJ Series Plastic Shell Center Jackscrew Connectors (Continued)
26, 38 & 46 Contact Layout
.075
[1.91]
.050
[1.27]
Typ.
.165
[4.19]
1.270
[32.26]
.635
[16.13]
.165
[4.19]
.585
[14.86]
1.170
[29.72]
.165
[4.19]
.870
[22.10]
.438
[11.13]
Guide Pin
.120
[3.05]
Jackscrew
#0-80
UNF-2A
Thd.
A
A
Bushing
#0-80 UNF-2B Thd.
.300
[7.62]
42 Layout 38 Layout 26 Layout Receptacle Section A-A
Plug
.305
[7.75]
.610
[15.49]
.285
[7.24]
.050
[1.27]Typ. .050
[1.27]Typ.
.120
[3.05]
Guide Pin
Bushing
#0-80 UNF-2B
Thd.
.300
[7.62]
Jackscrew
#0-80 UNF-2A
Thd.
10
61
7
7
16
14
1
20
36
46
27
11
26
14 1
15
1
21
20
42
38
20
21
1
Guide Pin
Guide Pin
Guide Pin Guide Pin Guide Pin Guide Pin
Guide Pin Guide Pin
Guide Pin
46 Layout Receptacle Plug
38 Positions 26 Positions 10 Positions
46 Positions 14 Positions 42 Positions
Contact Arrangement as Viewed from the Engaging Face of the Pin Side
Guide pin locations illustrated are for standards configuration only. Any location is available.
Guide pins are supplied in socket connectors and blank cavities are in pin connector.
MCJ B2 10 P 4 L 4 0.5Lead Length in Inches (min.)
Insulation Color or Finish
1 All white wire 4 Gold plated 7 Color coded per
2 All yellow wire 5 Tin dipped gold plated MIL-STD-681, System 1
3 All gray wire 6 Bare (unfinished) 8 Special color code
9 Ten solid color repeating
(starts with black)
Wire Size
4—24 AWG 5—25 AWG 6—26 AWG 8—28 AWG 0—30 AWG
Connector Series
Shell Material
B2 Glass filled nylon, type 6/10, blue
Layout (Positions)
10, 14, 26, 38, 42, 46
Contact Type
PPin
S Socket
X Special, does not fit description below.
S Solder pot for 26 AWG maximum stranded wire.
Wire Type
*A Type E, 7 strand *D Type ET, 19 strand G 19 strand per MIL-C-22759/11
*B Type ET, 7 strand F 7 strand per MIL-C-22759/11 26 AWG, 24 AWG
*C Type E, 19 strand (#28 AWG only) L Copper, solid
Q Stranded per MIL-W-22759/33
*Per MIL-W-16878
How ToSpecify
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Rectangular Connectors
48
JACKMATE MCJM Series Metal Shell Center Jackscrew Connectors
Technical and Performance
Data for Metal Shell Electrical
Contact Resistance —The average
mated contact resistance is 4 milliohms,
with a maximum value of 8 milliohms,
using standard 24 AWG solid copper
leads when measured directly behind the
crimp joints of the mated pin and socket
contacts. The average resistance value at
100 microvolts is 4.8 milliohms.
Dielectric Withstanding Voltage
(60 Hz rms room temperature) —
Solder Pots: 600 VAC at sea level; 150
VAC at 70,000 feet [21,336m].
Wire Terminations: 750 VAC at sea level;
200 VAC at 70,000 feet [21,336m].
Corrosion Resistance (Per MIL-
STD-202C, Method 101B, Condition
B) — Both mated and unmated samples
do not exceed the maximum allowable
contact resistance (8 milliohms) when
subjected to the 48 hour salt spray test.
Durability —The contact resistance
after 500 mating cycles is less than the
maximum allowable, 8 milliohms.
Insulation Resistance — Greater than
5,000 megohms at room temperature for
the materials listed under “Materials”.
Maximum Current Carrying
Capacity —No. 24 contact 3 amperes.
It must be recognized, however, that all
the wires to a connector will not carry
their maximum current under all envi-
ronmental conditions due to wire tem-
perature.
Mechanical
Contact Engaging & Separation
Forces —8.0 oz. max. [2.22N] (eng.),
0.5 oz. min.[.14N] (sep.).
Environmental
Temperature Range (Operating) —
-67°F to 302°F [-55°C to 150°C] for
Diallyl Phthalate.
Vibration (Per MIL-STD-202C,
Method 204-A, Condition D) —No
discontinuity in excess of 1 µ sec. dur-
ing twelve 20 minute sweeps from 10 to
2000 CPS at .06 double amplitude or 20
Gforces, whichever is less.
Materials
Insulator —Diallyl Phthalate per MIL-
M-14, Type SDG-F.
Contacts —Pin contact: copper alloy
and beryllium copper alloy make up the
complete construction; Socket contact:
copper alloy.
Body Shells —Pin body shell: stain-
less steel, Types 304, Condition A per
QQ-S-766; Socket body shell: aluminum
alloy per QQ-A-591, A-380 alloy.
Hardware —Corrosion resistant
stainless steel.
Finishes
Contacts —Standard finish is
0.000050 [0.00127] gold over copper
flash per MIL-G-45204, Type II.
Body Shells —Pin body shell: passi-
vated per MIL-F-14072 (E-300); Socket
body shell: electroless nickel per AMS
204, Class 3, except thickness is
0.001/0.0015 [0.025/0.038].
Hardware —Passivated per
QQ–P–35.
Note: Insulators are molded into
their metal shells —
No bonded joint is used.
*Standard material used unless
otherwise specified.
BPolarization
APolarization
Insert
Shell
Contact Pin
Jackscrew 2-56 UNC-2B Thd.
.300
[7.62]
.199
[5.05]
.180
[4.57] .187
[4.75]
.830
[21.08]
.125
[3.18]
.350
[8.89]
#41
#1
#48
Rad.
Typ.
.046
[1.17] #10
Rad.
Typ.
.078
[1.98] Hex
Socket
Jackscrew
Plug (Pin Side)
Shell Type M1
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Rectangular Connectors
49
Rectangular
Connectors
2
JACKMATE MCJM Series Metal Shell Center Jackscrew Connectors (Continued)
Receptacle (Socket Side)
Shell Type M1
Bushing
APolarization
BPolarization
Rad.
2 Plcs.
#48
#1 #10
#41
Sq.
.125
[3.18]
Rad.
2 Plcs.
.046
[1.17]
Rad.
4 Plcs.
.030
[0.76]
2 Plcs.
.050
[1.27]
2 Plcs.
.160
.005
[4.06
0.13
]
BSC
Typ.
.050
[1.27]
BSC
Typ.
.050
[1.27]
.830
[21.08] .125
[3.18]
+.010
–.005
+0.25
–0.13
.355
[9.02]
Full Rad. Typ.
Interfacial Seal Silicon Rubber
.310
[7.87]
2 Plcs.
.108
±.005
[2.74
±0.13
]
2 Plcs.
.094
±.005
[2.39
±0.13
]
Insert
Contact Skt.
Bushing Stainless Steel 2-56 UNC-2B Thd.
Rad.
2 Plcs.
.094
[2.39]
.070
±.005
[1.78
±0.13
]
2 Plcs. .200
±.005
[5.08
±0.13
]
2 Plcs.
Shell Type M2
#48
#1 #10
#41
48 P 4 L 4 0.5Lead Length in Inches (min.)
Insulation Color or Finish
1 All white wire 4 Gold plated 7 Color coded per
2 All yellow wire 5 Tin dipped gold plated MIL-STD-681, System 1
3 All gray wire 6 Bare (unfinished) 8 Special color code
9 Ten solid color repeating
(starts with black)
Wire Size
4—24 AWG 5—25 AWG 6—26 AWG 8—28 AWG 0—30 AWG
MCJ M1 A
JACKMATE Connector Series
Shell Material
M1 Metal Shell (Standard)
M2 Metal Shell (Special receptacles only)
Polarizing Position
A, B
Layout (Positions)
48
Contact Type
PPin
S Socket
X Special, does not fit description below.
S Solder pot for 26 AWG maximum stranded wire.
Wire Type
*A Type E, 7 strand *D Type ET, 19 strand G 19 strand per MIL-C-22759/11
*B Type ET, 7 strand F 7 strand per 26 AWG, 24 AWG
*C Type E, 19 strand MIL-C-22759/11 L Copper, solid
(#28 AWG only) Q Stranded per MIL-W-22759/33
*Per MIL-W-16878
How ToSpecify
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Rectangular Connectors
50
MCS Series Strip Connectors
Strip Connectors MCS Plastic Strip
How To Specify
26 P 6 A 1 18.0
Lead Length in Inches (min.)
Insulation Color or Finish
1 — All white wire 4 — Gold plated 7 — Color coded per
2 — All yellow wire 5 — Tinned MIL-STD-681, System 1
3 — All gray wire 6 — Bare (unfinished) 8 — Special color code
9 — Ten solid color repeating
(starts with black)
Wire Size
4–24 AWG 5–25 AWG 6–26 AWG 8–28 AWG 0–30 AWG
MCS AR 2
Connector Series
Insulator Type and Material
AR—Polyphenylene Sulfide per MIL-M-24519
or Liquid Crystal Polymer per ASTM D5138
Contact Locations
1 — Contact in every cavity
2 — Contact in every other cavity 1, 3, 5...
3 — Contact in every cavity except guide pin cavity in
each end cavity
4 — Contact in every other cavity 2, 4, 6... and
guide pin in each end cavity
X—Other than above
Standard Polarization
Guide pins are in socket connectors.
Blank cavities are in pin connectors.
Number of Cavities (120 Max.)
Contact Type
P—Pin S — Socket
X— Special, does not fit description below.
S — Solder pot for 26 AWG maximum stranded wire.
Wire Type
*A — Type E, 7 strand *D — Type ET, 19 strand G — 19 strand per MIL-22759/11
*B — Type ET, 7 strand F — 7 strand per 26 AWG, 24 AWG
*C — Type E, 19 strand MIL-22759/11 M— Copper, solid
(#28 AWG only) Q— Stranded per MIL-W-22759/33
*Per MIL-W-16878
A
A
.283
[7.19]
.070
[1.78]
Lead
Epoxy
Insulator
Pin Contact
Typ.
.035
[.889]
For Solid Wire
.125
[3.18]
For Insulated Wire
.050
[1.27]
Max.
Max.
Section A-A
C
Plug
B
B
Typ.
.070
[1.78]
Skt. Contact
Insulator
Epoxy
Lead .035
[.889]
For Solid Wire
.125
[3.18]
For Insulated Wire
.050
[1.27] .100
[2.54]
Max.
Max.
Section B-B
C
Receptacle
Part No. By Size C Max.
MCSAR*-1** .070 [1.78]
MCSAR*-2** .120 [3.05]
MCSAR*-3** .170 [4.32]
MCSAR*-4** .220 [5.59]
MCSAR*-5** .270 [6.86]
MCSAR*-6** .320 [8.13]
MCSAR*-7** .420 [10.67]
MCSAR*-8** .420 [10.67]
MCSAR*-9** .470 [11.94]
MCSAR*-10** .520 [13.21]
MCSAR*-11** .570 [14.48]
MCSAR*-12** .620 [15.75]
MCSAR*-13** .670 [17.02]
MCSAR*-14** .720 [18.29]
MCSAR*-15** .770 [19.56]
MCSAR*-16** .820 [20.83]
MCSAR*-17** .870 [22.10]
MCSAR*-18** .920 [23.37]
MCSAR*-19** .970 [24.64]
MCSAR*-20** 1.020 [25.91]
MCSAR*-21** 1.070 [27.18]
MCSAR*-22** 1.120 [28.45]
MCSAR*-23** 1.170 [29.72]
MCSAR*-24** 1.220 [30.99]
MCSAR*-25** 1.270 [32.26]
MCSAR*-26** 1.320 [33.53]
MCSAR*-27** 1.370 [34.80]
MCSAR*-28** 1.420 [36.07]
MCSAR*-29** 1.470 [37.34]
MCSAR*-30** 1.520 [38.61]
Part No. By Size C Max.
MCSAR*-31** 1.570 [39.88]
MCSAR*-32** 1.620 [41.15]
MCSAR*-33** 1.670 [42.42]
MCSAR*-34** 1.720 [43.69]
MCSAR*-35** 1.770 [44.96]
MCSAR*-36** 1.820 [46.23]
MCSAR*-37** 1.870 [47.50]
MCSAR*-38** 1.920 [48.77]
MCSAR*-39** 1.970 [50.04]
MCSAR*-40** 2.020 [51.31]
MCSAR*-41** 2.070 [52.58]
MCSAR*-42** 2.120 [53.85]
MCSAR*-43** 2.170 [55.12]
MCSAR*-44** 2.220 [56.39]
MCSAR*-45** 2.270 [57.66]
MCSAR*-46** 2.320 [58.93]
MCSAR*-47** 2.370 [60.20]
MCSAR*-48** 2.420 [61.47]
MCSAR*-49** 2.470 [62.74]
MCSAR*-50** 2.520 [64.01]
MCSAR*-51** 2.570 [65.28]
MCSAR*-52** 2.620 [66.55]
MCSAR*-53** 2.670 [67.82]
MCSAR*-54** 2.720 [69.09]
MCSAR*-55** 2.770 [70.36]
MCSAR*-56** 2.820 [71.63]
MCSAR*-57** 2.870 [72.90]
MCSAR*-58** 2.920 [74.17]
MCSAR*-59** 2.970 [75.44]
MCSAR*-60** 3.020 [76.71]
Part No. By Size C Max.
MCSAR*-61** 3.070 [77.98]
MCSAR*-62** 3.120 [79.25]
MCSAR*-63** 3.170 [80.52]
MCSAR*-64** 3.220 [81.79]
MCSAR*-65** 3.270 [83.06]
MCSAR*-66** 3.320 [84.33]
MCSAR*-67** 3.370 [85.60]
MCSAR*-68** 3.420 [86.87]
MCSAR*-69** 3.470 [88.14]
MCSAR*-70** 3.520 [89.41]
MCSAR*-71** 3.570 [90.68]
MCSAR*-72** 3.620 [91.95]
MCSAR*-73** 3.670 [93.22]
MCSAR*-74** 3.720 [94.49]
MCSAR*-75** 3.770 [95.76]
MCSAR*-76** 3.820 [97.03]
MCSAR*-77** 3.870 [98.30]
MCSAR*-78** 3.920 [99.57]
MCSAR*-79** 3.970 [100.84]
MCSAR*-80** 4.020 [102.11]
MCSAR*-81** 4.070 [103.38]
MCSAR*-82** 4.120 [104.65]
MCSAR*-83** 4.170 [105.92]
MCSAR*-84** 4.220 [107.19]
MCSAR*-85** 4.270 [108.46]
MCSAR*-86** 4.320 [109.73]
MCSAR*-87** 4.370 [111.00]
MCSAR*-88** 4.420 [112.27]
MCSAR*-89** 4.470 [113.54]
MCSAR*-90** 4.520 [114.81]
Part No. By Size C Max.
MCSAR*-91** 4.570 [116.08]
MCSAR*-92** 4.620 [117.35]
MCSAR*-93** 4.670 [118.62]
MCSAR*-94** 4.720 [119.89]
MCSAR*-95** 4.770 [121.16]
MCSAR*-96* 4.820 [122.43]
MCSAR*-97** 4.870 [123.70]
MCSAR*-98** 4.920 [124.97]
MCSAR*-99** 4.970 [126.24]
MCSAR*-100** 5.020 [127.51]
MCSAR*-101** 5.070 [128.78]
MCSAR*-102** 5.120 [130.05]
MCSAR*-103** 5.170 [131.32]
MCSAR*-104** 5.220 [132.59]
MCSAR*-105** 5.270 [133.86]
MCSAR*-106** 5.320 [135.13]
MCSAR*-107** 5.370 [136.40]
MCSAR*-108** 5.420 [137.67]
MCSAR*-109** 5.470 [138.94]
MCSAR*-110** 5.520 [140.21]
MCSAR*-111** 5.570 [141.48]
MCSAR*-112** 5.620 [142.75]
MCSAR*-113** 5.670 [144.02]
MCSAR*-114** 5.720 [145.29]
MCSAR*-115** 5.770 [146.56]
MCSAR*-116** 5.820 [147.83]
MCSAR*-117** 5.870 [149.10]
MCSAR*-118** 5.920 [150.37]
MCSAR*-119** 5.970 [151.64]
MCSAR*-120** 6.020 [152.91]
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Rectangular Connectors
51
Rectangular
Connectors
2
High Density Standard Module (HDSM) Connectors
Features
nDesigned for surface
mounting on both daughter
board and mother board for
increased circuit density
nBasic design offers 38, 78,
120, 152, 200, 304, and 400
contact designs
nHigh reliability twist pin and
socket per MIL-DTL-83513
and MIL-DTL-55302
nConnector permits lateral
movement of daughter
board to accommodate
clamping of the heatsink
nPlated through-hole
mounting available
nAvailable with flying leads
nExtender card option
available
nTypical mating force for 304
contacts is 38 pounds
nDesigned to withstand vapor
phase soldering
nTwo rotatable (six position)
polarizing keys are provided
accommodating 36 possible
combinations
nJackscrew hardware
available; consult
Tyco Electronics
nDifferent modular inserts
may be specified to include
coax (Pixi/Con), fiber optic
or other special contacts
nInserts may be partially or
fully loaded and installed in
the connector shell in
various configurations
The MICRODOT HDSM
connector is designed for
4row .050 [1.27] pitch
density with a special low
force twist pin that meets
all requirements of MIL-
DTL-55302 and MIL-DTL-
83513. This high density
connector allows the use of
construction to double the
packaging density with
surface mount capability.
Performance Data Summary
Electrical
Contacts —Pin 24 AWG twist pin,
Socket #24 AWG, Wire range 24 AWG to
32 AWG solid and stranded.
Contact Resistance (voltage drop)—
25 millivolts max. at 3 amps, 25° ± 3° C.
Current Rating —3amps max. per
contact
Dielectric Withstanding Voltage —
Volts RMS 60 Hz at room ambient:
600 V for solder pots at sea level.
150 V for solder pots at 70,000 ft.
[21,336m]
500 V for wire terminations at sea level.
200 V for wire terminations at 70,000 ft.
Insulation Resistance —5,000
megohms min. at room ambient.
Magnetic Permeability —2mµ max.
Mechanical
Contact Spacing —.050 [1.27] centers
Contact Engagement &
Separation —5.0 oz max. [1.39N]
(eng.) 0.5 oz. min. [.14N] 3.5 oz. typ.
[.97N] (sep.) force.
Materials and Finishes
Contacts —Copper alloy plated with
.000050 [0.00127] gold over copper
flash per MIL-G-45204, Type II.
Metal Shell —
Insulator — Liquid Crystal Polymer
(LCP) per ASTM D5138 or
Polyphenylene Sulfide per
MIL-M-24519
Body Shell — Aluminum alloy plated
Nickel, electroless per MIL-C-26074.
Environmental
Temperature Range —
-67°F to 257°F [-55° C to +125° C].
Vibration —No discontinuity in
excess of 1 micro sec. when tested in
accordance with MIL-STD-1344,
Method 2005, test Condition IV.
Insulator Retention —Inserts will
withstand a 50 lb. per squareinch load
in either direction.
Shock —No discontinuity in excess of
1micro sec. when tested in accordance
with MIL-STD-1344, Method 2004, test
Condition E.
Durability —No mechanical or electri-
cal defects detrimental to the function of
the connectors after 500 cycles of mat-
ing and unmating. (Caution: Mating
force increases during durability cycling
may be noted).
Humidity —After exposure to humidi-
ty as specified by MIL-STD-1344,
Method 1002, Type II, IR shall be 1
megohm min. immediately following
step 7a of Method 1002 and 1000
megohms min. after 24 hours of condi-
tioning per Method 1002.
Salt Spray —Connectors shall meet
the performance requirements of contact
resistance, mating and unmating forces,
and contact retention after being subject-
ed to the 48-hour 5% solution salt spray
test per MIL-STD-1344, Method 1001,
Condition B.
Crimp Termination Tensile
Strength —*Unassembled contacts
with crimped stranded wire terminations.
Wires will not pull out of contacts when
the following axial loads are applied:
24 AWG, 5 lbs., 26 AWG, 4 lbs.,
28 AWG, 3 lbs.
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Rectangular Connectors
52
High Density Standard Module (HDSM) Connectors (Continued)
A
B
38 & 78 Position Plug
Keying Hardware
.360
[9.14]
.050
[1.27]
B
A
Typ. Typ.
.050
[1.27]
Typ.
.025
[0.64] .150
[3.81]
.050
[1.27]
120, 152 & 200 Position Plug
(38 & 78) (120, 152 & 200)
A
CRef. A
A
A1
Mtg. Nut/Polarizing Key (Customer Installed)
2 Supplied (Packed Loose)
End Cav. A1 Near Side
End Cav. D1 Far Side
.290
[7.34]
.165
[4.19]
.505
[12.83]
.350
[8.89]
Marked As Shown
}
Min.
Ref.
2-56 UNC-2B Thd.
x.125 [3.17] DP
.290
[7.37]Ref.
.350
[8.89]Min.
Insulator
Pin Contact
Housing
Lead Organizer
28 AWG Wire
Solder Dipped
Ø.010 [0.25]
(All Leads)
Section A-A
C
C1
D1
C10 (20)
D9 (19)
A9 (19)
B10 (20) A1B1
C
C16 (20) (26)
C30 (38) (50)
A30 (38) (50)
B30 (38) (50)
D30 (38) (50) D1
A1
B1
C1
C15 (19) (25)
D15 (19) (25)
A15 (19) (25)
B15 (19) (25)
D16 (20) (26)
A16 (20) (26)
B16 (20) (26)
.050
[.127] .050
[.127]
.025
[0.64] D.200
[5.08]
.300
[7.62] .490
[12.50]Max.
Socket Side
Pin Side
Flat Screw
2-56 UNC-2A
Thd.
Flat Screw
2-56 UNC-2A
Thd.
Receptacle
Polarizing Key
2-56 UNC-2B
Thd.
Plug
Polarizing Key
2-56 UNC-2B
Thd.
A
B
C
D
.250
[6.35]
.050
[1.27]
2 Plcs.
.025
[0.64]
.050
[1.27]
Typ.
Typ.
B
A.050
[1.27].150
[3.81]
.360
[9.14]
304 & 400 Position Plug
A***
’A76’ (304) ’A100’ (400) Near Side Marking
’A1’ Near Side Marking
’D1’ Far Side Marking
’D76’ (304) ’D100’ (400) Far Side Marking
Mtg. Nut/Polarizing Key
(Customer To Install)
2Supplied (Packed Loose) A
A
A1
.050
[1.27]Ref. DRef. Standoff, 2-56 UNC-2B
Thd. x .125 [3.17] Min. Thd.
.165
[4.19]
.290
[7.34]
.505
[12.83]
2-56 UNC-2B Thd.
x.125 [3.17] DP
.290
[7.37]
.350
[8.89]
Min.
Ref.
.060
[1.52] .062
[1.58]
Thick
Pin Contact
Insulator
Housing
Lead
Organizer
28 AWG Wire
Solder Dipped
fl.010 [0.25]
(All Leads)
Section A-A
B76(100)
D76(100)
C75(99)
D75(99)
C76(100)
D76(100)
C75(99)
D75(99)
.100
[2.54]
.025
[0.64]
.050
[1.27] .075
[1.91]
Typ. Typ.
Typ.
Typ.
B59(77)
A59(77)
B58(76)
A58(76)
B56(74)
A56(74)
B57(75)
A57(75)
D58(76)
C58(76)
D59(77)
C59(77)
D57(75)
C57(75)
D56(74)
C56(74)
A40(52)
B39(51)
A39(51)
B40(52)
D40(52)
C39(51)
D39(51)
C40(52)
DTyp.
.050
[1.27]
C(2 Plcs.)
A37(49)
B37(49)
A38(50)
B38(50)
D37(49)
C37(49)
D38(50)
C38(50)
B21(27)
A21(27)
B20(26)
A20(26)
B18(24)
A18(24)
B19(25)
A19(25)
D20(26)
C20(26)
D21(27)
C21(27)
D19(25)
C19(25)
D18(24)
C18(24)
B1
A2
B2
A1
A4
B3
A3
B4
D4
C3
D3
C4C1
D2
C2
D1
C
L.250
[6.35]
.125
[3.18]Ref.
.460
[11.68] .590
[14.99]
.220
[5.59]
.100
[2.54]
.340
[8.64] Max.
Size 304 & 400 (Terminal Ident In Parentheses Is For Size 400)
2 Plcs.
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Rectangular Connectors
53
Rectangular
Connectors
2
High Density Standard Module (HDSM) Connectors (Continued)
.220
[5.59]
I.D. Of Bushing
Ø .062–.064
[1.57–1.61]
.195
[4.95]
C
D9(19)
C10(20)
A9(19)
B10(20)
C1D1
C1
B1
A1B1
A1
(38 & 78)
.226
[5.74]Typ. CD
(120, 152 & 200)
Flat Screw, 2 Supplied
2-56 UNC-2A Thd.
(Packed Loose)
Ø .132
[3.35]
ETorlon
Bushing
(4 Rqd)
Section B-B
-A-
.025
[0.64] .050
[1.27]
CRef.
DRef.
A
A
B
BA9(38)A19(76)A30(120)
A38(152)A50(200) Near Side Marking
D9(38)D19(76)D30(120)
D38(152)D50(200) Far Side Marking
.645
[16.38]
A1 Near Side Marking
D1 Far Side Marking
.160
[4.06]
.370
[9.40]
.545
[13.84]
.695
[17.65] .348
[8.84]
.050
[1.27]
Typ. At .545 [13.84] Dim.
.188
±.015
[4.78
± 0.38
]
Full Radius Typ.
Ø .008 M [.2.03] A M
.050
[1.27]
HRef. Dim.
GGage Dim.
FFree State
32 AWG,
Solder Dipped
Radius
Typ.
Typ.
C
LOf Radius
Of Leads
“Break Away”
Notch
(All Leads)
Housing
Insulator
Socket
Contact
Section A-A
B
.025
[0.64]
C
Typ.
.195
[4.95]Ref.
Size 38 & 78
B
A
38 & 78 Position Receptacle
A
B
.050
[1.27]
.025
[0.64]
Typ.
Typ.
.050
[1.27]
120, 152 & 200 Position Receptacle
.050
[1.27]
.150
[3.81]
.360
[9.14]
Polarizing Key, 2 Supplied
2-56 UNC-2B Thd.
(Packed Loose)
.050
[1.27] .195
[4.95]
.025
[0.64]Typ.
D
CTyp. Ref.
B
Size 120, 152 & 200
Recommended PCB Footprint Pattern
D1
Of
Mtg. Hole
C
L
BB/2(2 Plcs.)
D1
C1
B1
A1
Flat Head Screw (2 Plcs.)
2-56 UNC-2A Thd.
(Packed Loose, Customer To Install)
.226
[5.74]
.360
[9.14]
C(2 Plcs.)
.035
[0.89]
.018
[0.46] DTyp.
.195
[4.95]
2 Plcs.
1/2 B (2 Plcs.)
B
C(2 Plcs.)
Size 304 & 400
Recommended PCB Footprint Pattern
.025
[0.64]Typ.
Ø .008 M [.2.03] A M
(Typ.) At .545 [13.84] Dim. .160
[4.06]
.250
[6.35] Full
Radius
Typ. .050
[1.27]
D(4 Plcs.)
Typ.
Typ.
B
B
A
A
.370
[9.40]
.545
[13.84]
.645
[16.38] .695
[17.65]
A1 Near Side Marking
D1 Far Side Marking
A76(304) A100(400) Near Side Marking
D76(304) D100(400) Far Side Marking
Polarizing Key (2 Plcs.)
(Packed Loose, Customer To Install)
B
A
.250
[6.35]
.050
[1.27]
2 Plcs.
.025
[0.64] .050
[1.27]
Typ. Typ.
.150
[3.81]
.050
[1.27]
.348
[8.84]
.050
[1.27]
.188
±.015
[4.78
± 0.38
]
.050
[1.27]
HRef. Dim.
GGage Dim.
FFree State 32 AWG,
Solder Dipped
Radius
Typ.
Typ.
C
LOf Radius
Of Leads
“Break Away”
Notch
(All Leads)
Housing
Insulator
Socket
Contact
Section A-A
Of
Mtg. Hole
C
L
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Rectangular Connectors
54
High Density Standard Module (HDSM) Connectors (Continued)
No. of Cavities A Dim. B Dim. C Dim. D Dim.
Single Bay
381.000 .840 .450 —
25.40 21.34 11.43
781.500 1.340 .950 —
38.10 34.04 24.13
120 2.050 1.890 1.500 .725
52.07 48.01 38.10 18.42
152 2.450 2.290 1.900 .925
62.23 58.17 48.26 23.50
200 3.050 2.890 2.500 1.225
77.47 73.41 63.50 31.12
Double Bay
304 4.600 4.440 1.900 .925
116.84 112.78 48.26 23.50
400 5.800 5.640 2.500 1.225
147.32 143.26 63.50 31.12
Dash No. Gap Between FDim. G Dim. HDim.
Bushing "E" (Ref.)
1.100 .120 .180 .330
2.54 3.05 4.57 8.38
2.093 .060 .150 .330
2.36 1.52 3.81 8.38
3.118 .235 .260 .483
2.99 5.97 6.60 12.27
4.145 .120 .180 .330
3.68 3.05 4.57 8.38
How To Specify
Table I
L 4 L 4 0.5
Wire Length
Wire Type
*A — Type E, 7 strand *D — Type ET, 19 strand G — 19 strand per MIL-W-22759/11
*B — Type ET, 7 strand F— 7 strand per MIL-W-22759/11 26 AWG, 24 AWG
*C — Type E, 19 strand (#28 AWG only) L — Copper, solid
Q— Stranded per MIL-W-22759/33
*Per MIL-W-16878
HDSM 1 152
Connector Series
Contact Location
1—Full complement of contacts
2 — Contacts in outside rowonly
3 — Contacts in inside rowonly
4—Other than above or special housing
Layout
38, 78, 120, 152, 200, 304&400
Contact Type
L — LowForce Pin
SL — LowForce Socket
Wire Size
4—24 AWG 5—25 AWG 6—26 AWG 8—28 AWG 0—30AWG
X— Special Wire and/or other than above
S— Solder pot
Z— Coke Bottle Termination (Receptacle only, see Table I)
ZA — 4RowWire Termination (Plug only)
ZB—8RowWire Termination (Plug only)
Wire Color/Finish
1 — All white 4 — Gold plated 7 — Color coded per MIL-STD-681,
2 — All yellow5 — Tin dipped gold plated System1
3 — All gray 6 — Bare (unfinished) 8 — Special color code
9 — Ten basic color repeating on
each row(A, B, C, D)
(starting with black)
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
55
Circular
Connectors
3
Introduction
Our high density,light-
weight Multi-Pin Circular
Connectors are the
industry’s most advanced
and are ideally suited to
applications where many
conductors must be accom-
modated in a minimum of
space with minimum weight.
All series of connectors
feature a crimp contact
retention method, requiring
no insertion or removal tools.
The MARC 43 Series
Connectors conform to
applicable performance
requirements of MIL-C-26482
and has seen extensive
service on many leading
aerospace and ground sup-
portequipment programs.
The MARC 53 Series
Connectors, designed to
conform to the USAF high
reliability specification
MIL-C-38300, as offers
high density connector
performance. The positive
lock coupling mechanism,
combined with our exclu-
sive floating interfacial seal,
offers outstanding perform-
ance under rigorous service
conditions.
The MARC 63 Series
Connectors, our Bayonet
Coupling Series, accommo-
dates all insert patterns
and layouts available in the
MARC 43 Series Connectors,
MARC 53 Series Connectors,
and RMD Series Connectors.
All insert assemblies are
completely interchange-
able. Lighter in weight and
smaller in size than any
comparable connector on
the market, it requires up
to 50% less engagement/
separation force. Conversion
to bayonet coupling shell
from MARC 43 Series
Connectors or MARC 53
Series Connectors is done
without tools by merely
transferring the contacts
and insert assemblies into
the MARC 63 Series
Connectors shell.
The newest addition to the
Multi-Pin product line is the
MARC 73 Series Connectors.
The twist pin Circular
Connector combines the
lightweight, bayonet
High Density Circular
Connectors
Product Facts
nHigh density, light-weight
Multi-Pin Circular
Connectors feature a crimp
contact retention method,
requiring no insertion or
removal tools
nReverse gender available
nIdeal for harsh environment
nSealed — Silicon rubber
grommet/o-ring
nUnsealed — No grommet/
o-ring
nMeets MIL Standards (high
quality) but is not QPL
qualified
nIdeally suited to applications
wheremany conductors
must be accommodated in
aminimum of space with
minimum weight
nMARC Series Connectors
arenon-magnetic
nContact rating 2.5A
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
56
Introduction (Continued)
coupling feature of the
MARC 63 Series Connectors
with the twist pin high densi-
ty, center-to-center contact
spacing of 0.065 [1.65]
inch. The utilization of 22
AWG twist pin and socket
contacts provide for 50%
greater contact densities
than presently offered in the
MARC 43 Series Connectors,
MARC 53 Series Connectors,
orMARC 63 Series
Connectors.
The MQR Series is a line of
circular quick disconnect
connectors for rugged
environmental use.
Consult Tyco Electronics for
detailed information.
SHM Receptacle
MARC 43 Series Connectors &
MARC 53 Series Connectors
Mated MARC 53
Series Connectors SHM Receptacle
MARC 43 Series Connectors &
MARC 53 Series Connectors
Mated MARC 43 Series ConnectorsMated MARC 63 Series Connectors
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
57
MARC 43 Series Connectors
Materials and Finishes MARC 43 Series Connector
housings and quick
disconnect couplings are
machined from bar stock
aluminum to combine maxi-
mum strength with minimum
weight. Threaded couplings
are machined from non-
magnetic, stainless steel
bar stock for durability of
the coupling threads.
Contacts are manufactured
from high conductivity
copper alloys which have
been selected for low
contact resistance over the
operating range of the
connectors. Inserts are
molded from flame-resist-
ant, glass-filled diallyl
phthalate, meeting ASTM
D5948 requirements. All
resilient parts are made of
high temperature, silicone
rubbers. Fuel resistant
compounds are used
where swelling affects the
performance of the
connector. All materials are
carefully selected for their
non-magnetic properties.
The standard finish is clear,
non-conductive anodize on
connector housings and
quick disconnect couplings.
For threaded coupling
applications, aluminum
components are hard, black
anodized, and stainless
steel plug coupling is
passivated with black oxide
finish. Conductive finish
modifications include gold,
cadmium, and iridite
finishes. Contacts are gold
plated per MIL-G-45204
requirements. See page 63
for modification information.
General Information
Service and Performance Data
Ahigh density (.080 [2.03]
contact centers), lightweight,
subminiature, cylindrical
connector series featuring
crimp contacts and finger-
tip, push-pull, quick discon-
nect coupling. This series
conforms to the applicable
performance requirements
of MIL-C-26482 and is
available in unsealed,
environmentally sealed, and
hermetic types.
Alarge assortment in insert
arrangements — accommo-
dating AWG 12 through 32
gauge wire and miniature
coaxial cables — is available
for the design engineer’s
choice. The contacts are
retained by shoulder
entrapment and can be
crimped with the standard
M22520 tools, using appro-
priate locators.
This proven series of con-
nectors has a long history of
outstanding performance
on many military and aero-
space programs. MARC 43
Series Connectors are ideal
for applications where high
performance must be
achieved at low cost.
I. Electrical — Electrical Ratings
Current RatingDielectric Working Voltage
Contact Amperes, Withstanding Sea 70,000 ft.
Size Max., +27°C1Voltage (RMS) Level [21,336 m] Alt.
22 AWG 5 amps 1000 750 300
16 AWG 20 amps 1000 750 300
12 AWG 50 amps 1000 750 300
50 ohm 3 amps 1000 750 300
75 ohm 3amps 1250 1000 300
95 ohm 3 amps 1500 1250 300
1Consult nomograph.
II. Mechanical —Durability: 500 Cycles Mate/Unmate.
Coupling/Uncoupling Forces and Tightening Torques:
Coupling/
Shell Uncoupling Tightening Torque (In-Lbs.)
Size Force Retaining Nut Mounting Nut
(In-Lbs.) Max.
A 13 [57.8 N] 20, Max. [2.26 Nm] 30-45 [3.39 Nm – 5.08 Nm]
B 17 [75.6 N] 20, Max. [2.26 Nm] 40-55 [4.52 Nm – 6.21 Nm]
C 21 [93.4 N] 20, Max. [2.26 Nm] 55-70 [6.21 Nm – 7.91 Nm]
Operating Temperature: -85°F to 257°F [-65°C to +125°C].
Contact Wire Conductor Dielectric Shield Jacket
Size Size Dia. Dia. Dia. Dia.2
(Stranded)1(Teflon)
22 22, 24, 26 .019-.032 ——
.039-.054
.482-.813 .990-1.37
16316, 18, 20 .038-.061 ——.065-.081
.965-1.55 1.65-2.06
12 12 AWG .071-.093 ——
.096-.120
1.80-2.36 2.44-3.05
50 ohm 50 ohm .013 Max. .032-.036 .048-.054 .065-.087
.330 .813-.914 1.22-1.37 1.65-2.21
75 ohm 75 ohm .013 Max. .060-.066 .078-.084 .096-.109
.330 1.52-1.68 1.98-2.13 2.44-2.77
95 ohm 95 ohm .013 Max. .100-.104 .115-.123 .137-.154
.330 2.54-2.64 2.92-3.12 3.48-3.91
1Tolerance of conductor diameters required for a reliable crimp. Smaller sizes
readily accommodated — consult Tyco Electronics.
2Smaller jacketed cable can be accommodated but environmental seal may
be impaired. Smooth extruded jacket should be used for consistent wire
sealing.
3Size 16 AWG Contact for size 20 AWG Wire – Use Tool 010-0080-0000.
Circular
Connectors
3
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
58
MARC 43 Series Connectors (Continued)
Test Data
Contact Arrangements1
“A Size” InsertLayouts
(A = ) Shell Size 9
MARC 43 Series Connectors meet the applicable performance requirements of specification MIL-C-26482 (Navy) to
include the following selected test parameters listed below:
DESCRIPTION
MIL-C-26482 Test Para TEST REQUIREMENTS
Insulation Resistance, Insulation resistance of unmated connectors shall be 5000 megohms, minimum
Room and High Temp., at room temperature and 2000 megohms, minimum, at 257°F [+125°C]
Para. 4.7.3 when measured per MIL-STD-202, Method 302, Test Condition B.
Dielectric Withstanding Voltage, No evidence of dielectric breakdown or flashover when mated and unmated
Para. 4.7.4 plugs are subjected to 1000 volts, rms, per MIL-STD-202, Method 301.
Durability, Plugs and receptacles designed to withstand up to 500 cycles of engagement
Para. 4.7.9 and separation without detrimental electrical or mechanical damage to the
connectors.
Corrosion, Unmated plugs and receptacles shall show no exposure of basis metal due
Para. 4.7.10 to corrosion which would affect electrical or mechanical performance of the
connectors after subjection to 24 hours exposure to salt spray atmosphere
per MIL-STD 202, Method 101.
Sweep Vibration, Mated connectors shall show no circuit interruptions greater than 10 micro-
Mated, Para. 4.7.11 seconds during 12 hours vibration to include six sweeps in two axes at
-67°F[-55°C], room temperature, and 257°F [+125°C] per MIL-STD-202, Method
204, Test Condition B. Post inspection shall show no detrimental cracking,
breaking, or loosening of parts.
Moisture Resistance, The insulation resistance of mated connectors shall exceed 100 megohms
Para. 4.7.13 and 4.7.13.1 after subjection to moisture resistance testing per MIL-STD-202, Method 106.
Contact Retention, Contacts shall withstand 15 lbs [66.7 N] axial load without axial displacement in
Para. 4.7.16 excess of 0.012 [0.305] or damage to contacts or inserts when the axial load is
applied to the mating end of the contacts in unmated plugs and receptacles
at a rate of approximately 1 lb/sec.
“B Size” Insert Layouts
(B = ) Shell Size 12
Notes: 1Views shown are front face view of receptacles. Front face view of plugs is mirror image of that shown.
2Arrow ( ) indicates insert top or vertical position in relation to top or vertical position of connector housings.
3Arrangement also available in hermetic seal receptacles.
“C Size” Insert Layouts
(C = ) Shell Size 15
Insert Arrangement 2-1 -2 -5 -11 -12 -14 -17 -21
Number of Contacts 719 2-22 AWG 7 12 7-22 AWG 4 6-16 AWG
Contact Size 50 Ohm 22 AWG 2-50 Ohm 16 AWG22 AWG 2-50 Ohm 16 AWG 1-50 Ohm
Insert Arrangement 2-9 -103-15 -19 -34 -37 -47 -49
Number of Contacts 12 37 13-22 AWG 12 5 13-22 AWG 5 29-22 AWG
Contact Size 50 Ohm 22 AWG 6-50 Ohm 16 AWG 95 Ohm 6-12 AWG 75 Ohm 2-16 AWG
InsertArrangement 2-3 -4 -7 -13 -27 -48
Number of Contacts 19 61 22-22 AWG 43-22 AWG 5-75 Ohm 12
Contact Size 50 Ohm 22 AWG 2-75 Ohm 2-50 Ohm 4-95 Ohm 75 Ohm
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
59
Circular
Connectors
3
MARC 43 Series Connectors (Continued)
Part Number and Ordering
Information MARC 43 Series Connector
part numbers indicate size,
shape, insert layout, type of
seal, style of contact and
polarization. Note: Pin or
socket (power or coaxial)
contacts may be used in
either plugs or receptacles.
However, it is recommend-
ed that pins be placed in
the receptacle when possi-
ble to take advantage of our
“scoop-proof” design. (The
style—pin or socket—of a
coaxial contact refers to the
outer contact body.)
Alternate Keying. Standard
alternate polarizing key posi-
tions are shown below. Addi-
tional polarizing keyways are
available upon request.
Supplemental Accessory
Hardware. We also manufac-
ture supplemental accesso-
ry hardware (protective cov-
ers, cable clamps, etc.) to
adapt these connectors to
almost any application. For
modifications to fit
your requirements, contact
Tyco Electronics.
Polarizing Key Positions
All MARC 43 Series
Connector multi-pin plugs
and receptacles are avail-
able in alternate polarizing
positions as listed below:
(1) Arrow ( ) indicates top
or vertical position (master
key-keyway) and coincides
with top or vertical position
of insert. This relationship
remains constant with alter-
nate polarizing key positions.
N—for Normal
Typical Part Number
Size A
Part No. X° Y°
A43****N 130 110
A43****-1 130 150
A43****-2 90 110
A43****-3 210 110
A43****-4 130 35
A43****-5 90 230
Size B
Part No. X° Y°
B43****N 130 110
B43****-1 130 90
B43****-2 130 145
B43****-3 105 110
B43****-4 155 110
B43****-5 80 110
B43****-6 190 110
B43****-7 130 170
B43****-8 215 110
B43****-9 80 230
B43****-10 130 30
Size C
Part No. X° Y°
C43****N 130 110
C43****-1 130 90
C43****-2 130 150
C43****-3 130 170
C43****-4 190 110
C43****-5 150 110
C43****-6 90 110
C43****-7 70 110
C43****-8 70 230
C43****-9 90 230
C43****-10 210 110
C43****11 30 110
C43****12 250 30
C43****13 130 30
C43****14 30 230
YX
(1)
A 43 E H 14 P 5 (***)
Modification
Designator
when
Applicable
(See Page 63)
P = Plug
PF = Plug, sq. flange mtg.
PT = Plug, threaded cpl. ring
H = Receptacle, single hole mtg.
F = Receptacle, box mtg.
FT = Receptacle, box mtg.
(threaded coupl.)
J= Receptacle, line cord
S = Receptacle, solder mount
(Hermetic)
B = Receptacle, thru-bulkhead,
double end (Hermetic)
P = Pin (male) power contacts
PP = Double end pins (type B only)
S = Socket (female) power
CP = Coaxial pin contact, or
combination of coaxial pin
andpin power contacts
CS = Coaxial socket contact, or
combination of coaxial socket
andsocket power contacts
Note: If P, S, CP, or CS does not appear in the numbering system,
nocontacts will be supplied with order (order separately).
Polarizing
Position
N, 1, 2, 3, 4,
etc.
Layout number
Denotes
Microdot
Series
Unsealed A
Hermetic H
Sealed E
Size A
Circular Size B
Size C
Use one only
Plug Receptacle
YX
(1)
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
60
MARC 43 Series Connectors (Continued)
Configurations
Type P
Straight Plug, Push-Pull
Coupling, Sealed or
Unsealed (Mates with
Receptacles, All Types)
Shell Dimensions
Size AB
A.766 1.578
19.46 40.08
B.953 1.656
24.21 42.06
C1.141 1.75
28.98 44.45
B
A
1.266
[32.16]
Type PF
Straight Plug, Square
Flange Mounting, Push-Pull
Coupling, Sealed or
Unsealed (Mates with
Receptacles, all Types.)
Shell Dimensions
Size ABCD
A.730 .664 .875 .750
18.54 16.86 22.23 19.05
B.920 .786 1.000 .940
23.37 19.96 25.40 23.88
C1.110 .924 1.125 1.130
28.19 23.47 28.58 28.70
.175
[4.44] .062
[1.57]
ADia. BTyp. CTyp.
.110 – .130
[2.79–3.30]Typ .
1.266
[32.16]
Type PT
Straight Plug, Threaded
Coupling, Sealed or
Unsealed (Mates with
Receptacles, Types H, HH,
and FT)
1.500
[38.1]
A
Lockwire Holes
Master Keyway
TThread
Max.
D
Panel Cutout
Shell Dimensions
Size AT(Class 2B)
A.813 5/8-32 UN
20.65
B1.000 13/16-28 UN
25.40
C1.19 1-28 UN
30.23
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
61
Circular
Connectors
3
MARC 43 Series Connectors (Continued)
Configurations (Continued)
Type H
Receptacle, Single Hole
Mounting
Sealed or Unsealed
(Mates with Plugs, Types P,
PF and PT)
Type 43F
Receptacle, Box Mounting,
Sealed or Unsealed (Mates
with Plugs, Types P and PF)
Shell Dimensions
Size ABCD
A.875 .594 .562 .595
22.23 15.08 14.27 15.11
B1.000 .786 .75 .783
25.40 19.96 19.05 19.89
C1.125 .906 .875 .960
28.58 23.01 22.23 24.38
A
Hex.
B
Hex.
.065–.085
[1.65–2.16] .080–.100
[2.03–2.54]
C
Hex.
1.36
[34.54]
.125
[3.17]
TThread
Master
Key
E
D
Panel Cutout
D
Panel Cutout
.065–.085
[1.65–2.16] .052–.072
[2.03–2.54]
C
Hex.
1.36
[34.54]
B
Typ.
A
Typ.
.110–.130
[2.79–3.30]Dia.
Typ.
Master Polarizing
Key
Note: Unless otherwise shown, tolerances are: Decimals ±.015 [±.381], fractions ±1⁄32.
Shell Dimensions
Size AB C D E T (Class 2A)
A.75 .687 .562 .607-.611 .625-.629 5/8-32 UN
19.05 17.45 14.27 15.42-15.52 15.8-15.97
B.937 .875 .75 .794-.798 .812-.816 13/16-28 UN
23.80 22.23 19.05 20.17-20.27 20.62-20.72
C1.125 1.062 .875 .975-.979 .999-1.003 1-28 UN
28.58 26.97 22.23 24.77-24.87 25.37-25.47
.313 [7.95] max. panel for P & PF
.109 [2.77] max. panel. for PT
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
62
MARC 43 Series Connectors (Continued)
Type J
Receptacle, Line Cord,
Sealed or Unsealed (Mates
with Plugs, Types P and PF)
A
B
C
Type FT
Receptacle, Box Mounting,
Threaded Coupling, Sealed
or Unsealed (Mates with
Plugs, Types PT, P and PF)
Shell Dimensions
Size A B C T (Class 2A) D
A.875 .594 .562 5/8-32 UN .645
22.23 15.08 14.27 16.38
B1.000 .786 .75 13/16-28 UN .832
25.40 19.96 19.05 21.13
C1.125 .906 .875 1-28 UN 1.020
28.58 23.01 22.23 25.90
Max. panel thickness is .125 [3.18].
.065–.085
[1.65–2.16] .052–.072
[2.03–2.54]
C
Hex.
1.36
[34.54]
B
Typ.
A
Typ.
.110–.130
[2.79–3.30]Dia.
Typ.
Master Polarizing
Key
TThread
D
Panel Cutout
Shell Dimensions
Size ABC
A1.703 1.36 .766
43.26 34.54 19.46
B1.781 1.36 .953
45.24 34.54 24.21
C1.875 1.36 1.141
47.63 34.54 28.98
Configurations (Continued)
Note: Unless otherwise shown, tolerances are: Decimals ±.015 [±.381], fractions ±1⁄32.
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
63
Circular
Connectors
3
MARC 43 Series Connectors (Continued)
Accessories
Cable Clamps
A
B
.156
[3.96]
.156
[3.96]
C
D
A
B
Shell Size Part No. A [Max.] B [Max.]
A 086-0099-00X1 .704 .750
17.88 19.05
B086-0100-00X1 .773 .932
19.63 23.67
C 086-0101-00X1 .829 1.078
21.05 27.38
Shell Size Part No. A [Max.] B [Max.] C [Max.] D [Max.]
A 086-0103-00X1 .737 .600 1.100 .879
18.72 15.24 27.94 22.33
B086-0104-00X1 .913 .770 1.250 1.067
23.19 19.55 31.75 27.10
C 086-0105-00X1 1.048 .962 1.469 1.233
26.62 24.43 37.31 31.32
Straight Right-Angle
Contact Cavity Sealing Plugs (see page 80)
Contact Size Sealed Connector Unsealed Connector
PartNo. PartNo.
22 AWG 086-0055-0000 086-0001-0000
16AWG 086-0056-0000 086-0014-0000
12 A WG 086-0057-0000 086-0015-0000
50 ohm Coaxial 086-0058-0000 086-0061-0000
75 ohm Coaxial 086-0059-0000 086-0062-0000
95 ohm Coaxial 086-0060-0000 086-0063-0000
Protective Covers
Shell Receptacle Cover Part No.1Plug Cover Part No.1Dimensions (Max.)
Size With Chain Without Chain With Chain Without Chain A B C D
A086-0049-00J2 086-0073-00P1 086-0052-00J2 086-0076-00P1 .766 .950 .969 .913
19.46 24.13 24.62 23.19
B 086-0050-00J2 086-0074-00P1 086-0053-00J2 086-0077-00P1 .953 .950 1.156 .913
24.21 24.13 29.36 23.19
C 086-0051-00J2 086-0075-00P1 086-0054-00J2 086-0078-00P1 1.141 .950 1.344 .913
28.98 24.13 34.14 23.19
1For threaded plug (PT) and receptacle (FT) covers, consult Tyco Electronics. Wire rope/lanyard attachments and plastic protective caps also available,
consult Tyco Electronics.
A
B
C
D
Receptacle Cover Plug Cover
Modifications
The MARC 43 Series Connector modi-
fication identification system provides
alteration of standardMARC 43 Series
Connectors to include special finishes,
accessories, MARC 53 Series
Connector housings, and custom
quality assurance provisions —
processing, testing, serialization,
traceability. Consult your sales
representative or Tyco Electronics for
additional modification information.
Standardmodifications include:
(009): MARC 43 Series Connector,
anodized finish — black.
(048): MARC 43 Series Connector,
iridite finish — gold.
(056): MARC 43 Series Connector,
cadmium plated — clear.
(057): MARC 43 Series Connector
including cable clamp, straight
type.
(078): MARC 43 Series Connector
insertarrangement plus
MARC 53 Series Connector
positive lock coupling.
(094): MARC 43 Series Connector
coaxial insertarrangement to
include all-crimp coaxial contacts
plus MARC 53 Series Connector
positive lock coupling.
(098): MARC 43 Series Connector
connector including cable
clamp, right-angle type.
Contacts (see pages 78 and 79)
Contact Size Pin Part No. Socket Part No.
22AWG 083-0009-00R4 082-0464-00Y9
16AWG 083-0158-00R4 082-0113-00T1
12 AWG 083-0173-00R4 082-0132-00T1
50 ohm Coaxial 084-0024-00T2 084-0027-00T2
(Solder Type)
50 ohm Coaxial 141-1500-0001 142-1500-0001
(Crimp Type)
75 ohm Coaxial 084-0025-00T2 084-0028-00T2
95 ohm Coaxial 084-0026-00T2 084-0029-00T2
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
64
MARC 53 Series Connectors
Materials and Finishes
Housings and quick discon-
nect couplings aremachined
from bar stock aluminum to
combine maximum strength
with minimum weight.
Threaded couplings are
machined from non-mag-
netic, stainless steel bar
stock for durability of the
coupling threads. Contacts
aremanufactured from high
conductivity copper alloys
which have been selected
for low contact resistance
over the operating range of
the connectors. Inserts are
molded from flame-resistant,
glass-filled diallyl phthalate,
meeting ASTM D5948
requirements. All resilient
parts are made of high-
temperature, silicone
elastomers. Fuel resistant
compounds areused
where swelling affects the
performance of the
connector.All materials are
selected for their non-
magnetic properties.
The standard finish is hard
black, non-conductive,
anodized finish on connector
housings and quick discon-
nect couplings; stainless
steel threaded coupling is
passivated with black oxide
finish. Conductive finish
modifications include gold
finish and electroless nickel
finish. Multi-finish modifica-
tions for connector plugs
include black anodized
disconnect coupling with
conductive finish on shell
grounding members.
Contacts are gold plated
per MIL-G-45204 require-
ments. See Page 73 for
modification information.
General Information
The MARC 53 Series
Connector family represents
amajor advancement in the
design of high density (.080
[2.03] contact centers), sub-
miniature, power and coaxi-
alcontact connectors. The
MARC 53 Series Connectors
consists of two connector
styles — the Military
approved MD53 featuring
shoulder entrapped con-
tacts, and the new RMD53
utilizing rear insertable/
removable contacts.
MARC 53 Series Connectors
combine positive lock —
the rugged, push-pull, lock-
coupling mechanism — with
the unique positive seal
multiple sealing system.
Positive lock is our new fin-
ger-tip, push-pull coupling
with the safety lock feature,
and is the only connector
made with positive “blind
mating” indication. When the
plug is fully engaged, the
coupling ring can be rotated
45° to the safety lock
position; if the plug is not
completely engaged, the
coupling ring cannot be
turned to the safety lock
position. Consequently,
under “blindmating” condi-
tions, it is always possible
todetermine if the plug is
properly engaged without
visual reference, damage, or
accidental disengagement.
The environmental integrity
is guaranteed by multiple
seal construction using sili-
cone rubber “0” rings and a
floating, voidless insert con-
struction. The floating insert
design allows the inserts to
move within the connector
housing to control interfacial
sealing pressure in spite of
tolerance accumulation, and
acompression interfacial
seal with minimum engaging
force. Both the primary “0”
ring system and the contin-
uous dielectric construction
withstand the MIL-C-38300A
altitude breathing test. The
sealing system meets the
air leakage requirements of
not more than 1 cubic inch
of air per hour at a 30 P.S.l.
pressure differential. This
redundant sealing method
is indicative of the inherent
reliability built into our
connectors.
MARC 53 Series Connector
power contacts are manu-
factured from high grade
copper alloys, and are
designed to be crimped
with standard M22520
tooling using subminiature
contact locators.
MARC 53 Series Connectors
incorporate hard insulators
in both the plug and recep-
tacle inserts for exceptional
contact stability.Shoulder
entrapment positively
retains the front insertable
MD53 contacts between
the front and rear insulators.
The new RMD53 contacts
are rear insertable and
removable and are retained
within the connector insula-
tors by clips which can be
visually inspected. No inser-
tion or extraction tools are
required for either the MD53
or RMD53 contacts using
nominal size wire.
MARC 53 Series Connectors
are truly field serviceable…
no special tools are required
for maintainability. In addi-
tion, connector subcompo-
nents damaged through
handling or misuse can
be procured separately
generally without the need
to scrap entire connector
units.
Weight reductions as high
as 67% are achieved with-
out loss of performance.
MARC 53 Series Connectors
areavailable in both environ-
mental and hermetic styles.
In addition to the positive
lock plug, a threaded cou-
pling plug is also available.
Partnumbers for configura-
tions offering various finishes
and accessories plus other
design variations to satisfy
special requirements are
also available.
MD53
shoulder entrapped contacts RMD53
rear insertable contacts
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
65
Circular
Connectors
3
MARC 53 Series Connectors (Continued)
Service and Performance
Data I. Electrical —Electrical Ratings
Current Rating Dielectric Working Voltage Contact
Contact (Amperes, Withstanding Sea 110,0001Resistance
Size Max., 81°F [+27°C]) Voltage (RMS) Level Ft. Alt. (Millivolts, Max.)
22AWG 5 1000 750 300 15
16 A WG 20 1000 750 300 20
110,000 ft equals 33,528 m altitude.
Wire Sizes Accommodated
Contact Cond. Dia. Jacket
Size (Stranded)1Size2
22AWG .019-.032 .039-.054
[.483-.813] [.991-1.37]
16 A WG .038-.061 065-.081
[.965-1.55] [1.65-2.05]
1Tolerance of conductor diameters required for a reliable crimp. Smaller sizes
readily accommodated — consult Tyco Electronics.
2Smaller jacketed cable can be accommodated but environmental seal
may be impaired. Smooth extruded jacket should be used for consistent
wire sealing.
Insulation Resistance: 5000 megohms, minimum, at room ambient conditions.
II. Mechanical —Durability: 500 Cycles Mate/Unmate.
Coupling/Uncoupling Forces and Tightening Torques:
Coupling/
Shell Uncoupling Tightening Torque (In-Lbs.)
Size Force Retaining Nut Mounting Nut
(In-Lbs.) Max.
9 18 [80.07 N] 20 [2.26 Nm], Max. 30-45 [3.39 – 5.08 Nm]
12 22 [97.86 N] 20 [2.26 Nm], Max. 40-55 [4.52 – 6.21 Nm]
15 27 [120.10 N] 20 [2.26 Nm], Max. 55-70 [6.21 – 7.91 Nm]
18 32 [142.34 N] 20 [2.26 Nm], Max. 70-85 [7.91 – 9.60 Nm]
Operating Temperature: -67°F to 257°F [-55°C to +125°C]
Connector Mated Length: MD Plug (06) mated to MD Receptacles (00) (01)
(02) (12): 2.031 [51.58], max. RMD Plug (06) mated to RMD Receptacles:
2.217 [56.31], max.
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
66
MARC 53 Series Connectors (Continued)
Test Data
MARC 53 Series Connectors exceed the requirements of specification MIL-C-38300A (USAF) as detailed in the applicable
M38300A (USAF) military specification sheets.
MARC 53 Series Connectors meet the following selected test parameters as specified below:
DESCRIPTION
MIL-C-38300 Test Para TEST REQUIREMENTS
Contact Retention MD Contacts shall withstand 15 lbs [66.72 N] axial load and RMD contacts
Para. 4.10.3 10 lbs [44.48 N] axial load without axial displacement in excess of 0.012 [.305]
or damage to contacts or inserts when the axial load is applied to the mating
end of the contacts in unmated plugs and receptacles at a rate of approximately
1lb/sec. [4.45 N].
Contact Resistance The potential drop across normally mated contacts shall not exceed 25 mv
Para. 4.10.8 under room ambient and high temperature service conditions when measured
as specified in MIL-C-26636, Fig. 2, with maximum rated current.
Dielectric Withstanding Voltage, No evidence of dielectric breakdown or flashover when mated and unmated
Altitude and Sea Level plugs are subjected to 645 and 180 volts RMS, respectively, at altitudes up to
Para. 4.10.10 110,000 feet [33,528 m] and 1000 volts RMS at sea level.
Insulation Resistance, Insulation resistance of mated plugs and receptacles shall be 5000 megohms,
Room and High Temp. minimum, at room temperature and 1000 megohms, minimum, at 257°F
Para. 4.10.13 and 4.10.13.1 [+125°C] when measured per MIL-STD-202, Method 302, Test Condition B.
Coupling and Uncoupling Plugs and receptacles shall withstand up to 500 cycles of engagement and
Para. 4.11.3 separation (locking mechanism actuated with each cycle) without detrimental
damage to plugs or receptacles or not satisfying subsequent tests of MIL-C-38300.
Fluid Immersion Mating and unmating forces shall not exceed 27 Ibs, [120.10 N] maximum,
Para. 4.11.5 (15 shell size) after fully wired plugs and receptacles are immersed for 20 hours,
each, in hydraulic fluid (MIL-H-5606) and high temperaturelubricating oil
(MIL-L-9236) followed by a one-hour dry.
Sweep Vibration, Mated Mated connectors shall show no circuit interruptions greater than one microsec-
Para. 4.11.6 ond during 12 hours vibration to include six sweeps in each axis at extreme
temperatures of -85°F [-65°C] and 257°F [+125°C] per MIL-STD-202, Method
204, Test Condition D. Post inspection shall show no detrimental cracking,
breaking, or loosening of parts.
Moisture Resistance The insulation resistance of mated connectors shall exceed 1000 megohms
Para. 4.11.8 after subjection to moisture resistance testing per MIL-STD-202, Method 106, as
amended by MIL-C-38300.
Altitude Breathing The insulation resistance of wired and mated connectors shall be 5000
Para. 4.11.12 megohms, minimum, and there shall be no flashover or breakdown at a test
voltage of 1000 volts RMS after the third cycle and while immersed in 5% salt
water solution at 68°F [20°C] and room ambient pressure pressure at 68°F
[20°C].
Salt Spray Unmated plugs and receptacles shall show no excessive corrosion which
Para. 4.11.13 would detrimentally affect the electrical and mechanical performance of the
connectors after subjection to 24 hours exposure to salt spray atmosphere per
MlL-STD-202, Method 101.
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
67
Circular
Connectors
3
MARC 53 Series Connectors (Continued)
Shell Size 9 Shell Size 12 Shell Size 15 Shell Size 186
Contact Arrangements 1,2
1Views shown are front face view of receptacles. Front face view of plugs is mirror image of that shown.
2In addition to those inserts shown, MARC 43 Series Connector inserts may be utilized in MARC 53 Series Connector
housings. See page 63, MARC 43 Series Connector modifications.
3Arrow ( )indicates insert top or vertical position in relation to top or vertical position of connector housings.
4Arrangement also available in RMD style.
5Arrangement also available in hermetic seal receptacles.
6Arrangement available in 06, 00, 01.
PartNumber and
Ordering Information
MARC 53 Series Connector
part numbers indicate size,
shape, insert layout, type of
seal, style of contact and
polarization.
Note: Pin or socket (power
or coaxial) contacts may be
used in either plugs or
receptacles. However, it is
recommended that pins be
placed in the receptacles
when possible to take
advantage of our “scoop-
proof” design.
Alternate Keying —Standard
alternate polarizing key
positions areshown below.
Additional polarizing key-
ways are available upon
request.
Supplemental Accessory
Hardware —We also manu-
facture supplemental acces-
sory hardware (protective
covers, shield adapters,
etc.) to adapt these connec-
tors to almost any applica-
tion. For modifications to fit
your requirements, contact
Tyco Electronics.
Typical Part Number
MD53 06 E 15 61 S N (***)
Modification
Designator
when applicable
(See page 73)
Polarizing position
N, 1, 2, 3, 4, etc.
P — Pin, Power Pin, Coaxial Pin
S — Socket, Power Socket, Coaxial Socket
NOTE: If P or S does not appear in the
numbering system, no contacts will be
supplied with order (order separately)
Insert arrangement number
Shell Size — O.D. of receptacle
barrel to nearest .063 [1.60]
E — Environmentally sealed
H — Hermetic seal (receptacle only).
Single hole mntng. 00
receptacle
Line cord recept. 01
Box mntng. recpt. 02
Straight plug, 06
positive lock quick
disconnect
Box mntng. recept., thd 12
Straight plug, 16
threaded coupling
Series — MD53
or RMD53 style
Insert Arrangement 39-19 4,5 12-37 4,5 15-31 518-91 4,5
Number of Contacts 19 37 31 91
Contact Size 22 AWG 22 AWG 16 AWG 22 AWG
Shell Size 15 Shell Size 15 Shell Size 15
Shell Size 9
InsertArrangement 39-7 515-61 4,5 15-55 15-43
Number of Contacts 7 61 55 1-95 ohm
Contact Size 16 AWG 22 AWG 22-20 AWG 42-22 AWG
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
68
MARC 53 Series Connectors (Continued)
Polarizing Key Positions
All of our multi-pin plugs
and receptacles are avail-
able in alternate polarizing
positions as listed below:
Shell Size 9
Part No. X° Y°
(R) MD53-***9-***-N 130 110
(R) MD53-***9-***-1 130 150
(R) MD53-***9-***-2 90 110
(R) MD53-***9-***-3 210 110
(R) MD53-***9-***-4 130 35
(R) MD53-***9-***-5 90 230
Shell Size 12
Part No. X° Y°
(R) MD53-***12-***-N 130 110
(R) MD53-***12-***-1 130 90
(R) MD53-***12-***-2 130 145
(R) MD53-***12-***-3 105 110
(R) MD53-***12-***-4 155 110
(R) MD53-***12-***-5 80 110
(R) MD53-***12-***-6 190 110
(R) MD53-***12-***-7 130 170
(R) MD53-***12-***-8 215 110
(R) MD53-***12-***-9 80230
(R) MD53-***12-***-10 130 30
Shell Size 15
Part No. X° Y°
(R) MD53-***15-***-N 130 110
(R) MD53-***15-***-1 130 90
(R) MD53-***15-***-2 130 150
(R) MD53-***15-***-3 130 170
(R) MD53-***15-***-4 190 110
(R) MD53-***15-***-5 150 110
(R) MD53-***15-***-6 90 110
(R) MD53-***15-***-7 70 110
(R) MD53-***15-***-8 70 230
(R) MD53-***15-***-9 90 230
(R) MD53-***15-***-10 210 110
(R) MD53-***15-***-11 30 110
(R) MD53-***15-***-12 250 30
(R) MD53-***15-***-13 130 30
(R) MD53-***15-***-14 30 230
Shell Size 18
PartNo. A° B° C° D° E°
(R) MD53-***18-***-N 60 130 185 250 325
(R) MD53-***18-***-1 70 130 205 270 320
(R) MD53-***18-***-2 55 130 210 250 310
(R) MD53-***18-***-3 50 130 190 235 305
(R) MD53-***18-***-4 75 125 190 250 320
(R) MD53-***18-***-5 80 150 205 250 300
(R) MD53-***18-***-6 50 90 175 250 315
(R) MD53-***18-***-7 70 120 175 250 295
(R) MD53-***18-***-8 70 130 205 260 325
(R) MD53-***18-***-9 35 90 130 215 285
(R) MD53-***18-***-10 75 140 210 250 310
YX
(1)
E
A
B
D
C
(1)
E
A
B
D
C
(1)
YX
(1)
Plug
(Shell sizes 9, 12, 15 only) Receptacle
(Shell sizes 9, 12, 15 only)
Plug
(Shell size 18 only) Receptacle
(Shell size 18 only)
(1) Arrow ( ) indicates top or vertical position (master key/keyway) and coincides with top or vertical position of insert
shown on page 59. This relationship remains constant with alternate polarizing key positions.
(R) Rear insertable and removable.
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
69
Circular
Connectors
3
MARC 53 Series Connectors (Continued)
Configurations
MD53-06E/RMD53-06E
Straight Plug, positive lock
Coupling, Environmental
(Mates with Receptacles,
All Types)
B
.093
[2.36]
C
Max.,
RMD only
Master Keyway
A
MD53-16E/RMD53-16E
Straight Plug, Threaded
Coupling, Environmental
(Mates with Receptacles,
Types 00 and 12; Not avail-
able in 18 Shell Size)
B
.093
[2.36]
C
Max.,
RMD only
A
TThread
Lockwire
Holes
Master
Keyway
Shell Dimensions
Size A B (Max.) C (Max.)
9.890 1.000 1.281
22.60 25.4 32.54
12 1.078 1.000 1.281
27.38 25.4 32.54
151.262 1.000 1.281
32.05 25.4 32.54
18 1.577 1.000 1.281
40.06 25.4 32.54
Shell Dimensions
Size A B (Max.) C (Max.) T (Class 2B)
9.812 1.125 1.500 5/8-32UN
20.62 28.57 38.1
12 1.000 1.125 1.500 13/16-28UN
25.4 28.57 38.1
15 1.187 1.125 1.500 1-28UN
30.15 28.57 38.1
18 1.437 1.125 1.437 1-1⁄4-28UN
36.50 28.57 36.50
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
70
MARC 53 Series Connectors (Continued)
MD53-00E/RMD53-00E
Receptacle, Single Hole
Mounting, Environmental
(Mates with Plugs, Type 06
and 16)
C
E
D
F
Hex.
A
Hex.
B
Hex.
Max.,
RMD Only
Master
Key
.065–.085
[1.65–2.16]
.093
[2.36]
TThread
G
.080–.100
[2.03–2.54]
.125
[3.18]
Note: .313 [7.95] Maximum Panel Thickness when mated with a positive lock 06 Plug.
.109 [2.77] Maximum Panel Thickness when mated with threaded 16 Plug.
Panel Cutout
Shell Dimensions
Size A B C D E F G T (Class 2A)
9.75 .687 1.360 .607-.611 .625-.629 .563 .090 5/8-32NS
19.05 17.45 34.54 15.42-15.52 15.87-15.97 14.30 2.29
12 .937 .875 1.360 .794-.798 .812-.816 .75 .090 13/16-28NS
23.80 22.23 34.54 20.17-20.27 20.62-20.73 19.05 2.29
15 1.125 1.062 1.360 .975-.979 .999-1.003 .875 .090 1-28UNS
28.58 26.97 34.54 24.76-24.86 25.37-25.48 22.23 2.29
181.625 1.375 1.360 1.214-1.218 1.251-1.255 1.125 .125 1-1/4-28UN
41.28 34.93 34.54 30.83-30.94 31.77-31.87 28.58 3.18
MD53-01E/RMD53-01E
Receptacle, Line Cord,
Environmental (Mates with
Plug, Type 06)
.093
[2.36] Max.,
RMD only
B
Master
Key
C
Hex.
A
Note: Unless otherwise shown, tolerances are: decimals ± .015 [±.381]; fractions ± 1⁄32.
Shell Dimensions
Size A(Max.) B(Max.) C
91.360 .766 .562
34.54 19.46 14.27
12 1.360 .953 .75
34.54 24.21 19.05
15 1.360 1.141 .875
34.54 28.98 22.23
18 1.360 1.578 1.125
34.54 40.08 28.58
Configurations (Continued)
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
71
Circular
Connectors
3
MARC 53 Series Connectors (Continued)
MD53-02E/RMD53-02E
Receptacle, Box Mounting,
Environmental (Mates with
Plug, Type 06)
.065–.085
[1.65–2.16] .052–.072
[1.32–1.80]
C
Hex.
1.36
[34.54]
B
Typ.
A
Typ.
.110–.130
[2.79–3.30]Dia.
Typ.
Master Polarizing
Key
.093
[2.36]Max.RMD only
D
Shell Dimensions
Size ABCD
9.875 .594 .563 .595
22.23 15.09 14.30 15.11
121.000 .786 .75 .783
25.40 19.96 19.05 19.89
15 1.125 .906 .875 .960
28.58 23.01 22.23 24.38
18 1.344 1.062 1.125 1.212
34.14 26.97 28.58 30.78
MD53-12E/RMD53-12E
Threaded Coupling
Receptacle, Box Mounting,
Environmental (Mates with
Plugs, Type 06 and 16; not
available in 18 Shell Size)
.065–.085
[1.65–2.16] .052–.072
[1.32–1.80]
C
Hex.
1.36
[34.54]
B
Typ.
A
Typ.
.110–.130
[2.79–3.30]Dia.
Typ.
Master Polarizing
Key
.093
[2.36]Max.RMD only
TThread
D
Shell Dimensions
Size A B C T (Class 2A) D
9.875 .594 .563 5/8-32UN .645
22.23 15.09 14.30 16.38
12 1.000 .786 .75 13/16-28UN .832
25.40 19.96 19.05 21.13
15 1.125 .906 .875 1-28UN 1.020
28.58 23.01 22.23 25.91
.375 [9.53] Max. Panel Thickness for
rear-mount applications.
Note: Unless otherwise shown, tolerances are: decimals ± .015 [±.381]; fractions ± 1⁄32.
Configurations (Continued)
Panel Cutout
.125 [3.18] Max. Panel Thickness
when mated with threaded 16 Plug
for rear mount applications.
Panel Cutout
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
72
MARC 53 Series Connectors (Continued)
Accessories
Test Adapter
The test adapter accessory
isutilized primarily as a con-
nector simulator to preserve
the end-use connector
where this connector would
be subjected to extensive
testing, matings, or probings.
The test adapter, when
mated, provides the exact
mating interface as that of
the end-use connector and is
completely field serviceable.
Test Adapter Product
Part Number System
How to Specify
Protective Covers
Shell Receptacle Cover Part No.1Plug Cover Part No.1Dimensions (Max.)
Size With Chain Without Chain With Chain Without Chain A B C D
9 086-0049-00AL 086-0073-00W3 086-0052-00L6 086-0076-00P2 .766 .950 .969 .913
19.46 24.13 24.61 23.19
12 086-0050-00AL 086-0074-00W3 086-0053-00L6 086-0077-00P2 .953 .950 1.156 .913
24.21 24.13 29.36 23.19
15 086-0051-00AL 086-0075-00W3 086-0054-00L6 086-0078-00P2 1.141 .950 1.344 .913
28.98 24.13 34.14 23.19
18 086-0146-00AL 086-0139-00W3 086-0147-00L6 086-0140-00P2 1.578 1.000 1.781 .913
40.08 25.4 45.24 23.19
1For threaded plug (PT) cover, consult Tyco Electronics. Wire rope/lanyard attachments and plastic protective caps also available, consult Tyco Electronics.
B
A
D
C
Receptacle Cover Plug Cover
B
A
Dia.
Shell Dimension
Size A(Max.) B(Max.)
9.906 2.670
23.01 67.82
12 1.094 2.670
27.79 67.82
15 1.281 2.670
32.54 67.82
18 1.594 2.670
40.49 67.82
T 53 E 15 61 SP N (XXX)
Modification Designator
Polarizing Position
Contact Sex
SP — Sockets Plug end, Pins Receptacle end
PS — Pins Plug end, Sockets Receptacle end
Layout
Shell Size
Adapter Type
E — Sealed
A — Unsealed
Series or Style
53 — MARC 53 Series Connector
63 — MARC 63 Series Connector
Test Adapter
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
73
Circular
Connectors
3
MARC 53 Series Connectors (Continued)
Accessories (Continued)
Cable Clamps
Shell Clamp Part No. AB T
Size MD RMD Thd. 2A
9 086-0099-00F5 086-0175-00F3 .704 .750 1/2-20 UNF
17.88 19.05
12 086-0100-00F5 086-0176-00F3 .773 .932 11/16-24 UNEF
19.63 23.67
15 086-0101-00F5 086-0177-00F3 .829 1.078 13/16-24 UNEF
21.06 27.38
18 086-0142-00F5 086-0178-00F3 .890 1.250 1-28 UN
22.61 31.75
Contact Cavity Sealing Plugs (see page 80)
Contact Standard Length Part No. Short Length Part No.
Size MD RMD MD RMD
22 A WG 086-0055-0000 086-0148-0000 082-0009-0000 086-0009-0000
16 A WG 086-0056-0000 —082-0010-0000 —
Note: Standard length plug occupies contact cavity and wire sealing grommet. Short length
plug occupies wire sealing grommet only (to be used behind non-wired contacts and
in plugs which mate to hermetic receptacles).
We offer a unique modifica-
tion identification system
which provides alteration of
standardMARC 53 Series
Connectors to include spe-
cial finishes, accessories,
MARC 43 Series Connector
contact arrangements, and
custom quality assurance
provisions — processing,
testing, serialization,
traceability. Consult
Tyco Electronics for addition-
al modification information.
Standard modifications
include:
(503): MARC 53 Series
Connector including
cable clamp, straight
type
(504): MARC 53 Series
Connector including
cable clamp, right-
angle type
(506): MARC 53 Series
Connector,gold finish
(507): MARC 53 Series
Connector, electro-
less nickel finish
(508): MARC 53 Series
Connector, black
anodized coupling
ring, gold over elec-
troless nickel hous-
ings, retaining nuts
and hardware.
Contacts (see pages 78 and 79)
Contact Pin PartNo. Socket PartNo.
Size MD RMD MD RMD
22 A WG 083-0009-00R4 083-1200-00R4 082-0464-00Y9 082-0462-00Y9
16 AWG 083-0158-00R4 —082-0113-00T1 —
Note: Standard packaging includes same quantity of contacts as contact cavities in insert.
.156
[3.96]
T
A
B
Shell Clamp Part No. T
Size MD RMD AB(Max.) C (Max.) D Thd. 2A
9086-0103-00F5 086-0179-00F3 .737 .600 1.100 .879 1/2-20 UNF
18.72 15.24 27.94 22.32
12 086-0104-00F5 086-0180-00F3 .913 .775 1.250 1.067 11/16-24 UNEF
23.19 19.68 31.75 27.10
15 086-0105-00F5 086-0181-00F3 1.048 .962 1.469 1.233 13/16-20 UNEF
26.62 24.43 37.31 31.32
18 086-0143-00F5 086-0182-00F3 1.225 1.185 1.550 1.550 1-28 UN
31.12 30.01 39.37 39.37
.156
[3.96]
C
TA
B
D
Right-Angle
Straight
Modifications
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
74
MARC 63 Series Connectors
MARC 63 Series Connectors RMD63 Performance Data
MARC 63 Series Connectors,0 RMD63 Series meet or exceed the performance requirements of specification MIL-C-
38300A (USAF) as detailed in the M38300A (USAF) military specification sheets covering the MARC 53 Series
Connectors. Tyco Electronics can supply detailed, cross reference information. MARC 63 Series Connectors, RMD63
Series meet the following selected test parameters as specified below:
DESCRIPTION TEST REQUIREMENTS
Contact Retention Contacts are to withstand 15 lbs. [66.72 N] axial load and RMD contacts 10 lbs.
[44.48 N] axial load without axial displacement in excess of 0.012 [.305] or
damage to contacts or inserts when the axial load is applied to the mating end
of the contacts in unmated plugs and receptacles at a rate of approximately
1lb/sec. [4.45 N].
Contact Resistance The potential drop across normally mated contacts shall not exceed 25 mv
under room ambient and high temperature service conditions when measured
as specified in MIL-C-26636, Fig. 2, with maximum rated current.
Dielectric Withstanding Voltage, No evidence of dielectric breakdown or flashover when mated and unmated
Altitude and Sea Level plugs are subjected to 645 and 180 volts RMS, respectively, at altitudes up to
110,000 [33,528 m] feet and 1000 volts RMS at sea level.
Insulation Resistance, Insulation resistance of mated plugs and receptacles shall be 5000 megohms,
Room and High Temp. minimum, at room temperature and 1000 megohms, minimum, at 257°F
[+125°C] when measured per MIL-STD-202, Method 302, Test Condition B.
Coupling and Uncoupling Plugs and receptacles shall withstand up to 500 cycles of engagement and
separation without detrimental damage to plugs or receptacles or not satisfying
subsequent tests of MIL-C-38300.
Fluid Immersion Mating and unmating forces shall not exceed 27 lbs. [120.10 N], maximum,
(15 shell size) after fully wired plugs and receptacles are immersed for 20 hours,
each, in hydraulic fluid (MIL-H-5606) and high temperaturelubricating oil
(MIL-L-9236) followed by a one-hour dry.
Sweep Vibration, Mated Mated connectors shall show no circuit interruptions greater than one
microsecond during 12 hours vibration to include six sweeps in each axis at
extreme temperatures of -85°F [-65°C] and 257°F [+125°C] per MIL-STD-202,
Method 204, Test Condition D. Post inspection shall show no detrimental crack-
ing, breaking, or loosening of parts.
MoistureResistance The insulation resistance of mated connectors shall exceed 1000 megohms after
subjection to moisture resistance testing per MIL-STD-202, Method 106, as
amended by MIL-C-38300.
Altitude Breathing The insulation resistance of wired and mated connectors shall be 5000
megohms, minimum, and thereshall be no flashover or breakdown at test voltage
of 1000 volts RMS after the third cycle and while immersed in 5% salt water
solution at 68°F [20°C] and room ambient pressure at 68°F [20°C].
Salt Spray Unmated plugs and receptacles shall show no excessive corrosion which
would detrimentally affect the electrical and mechanical performance of the
connectors after subjection to 24 hours exposureto salt spray atmosphere per
MIL-STD-202, Method 101.
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
75
Circular
Connectors
3
MARC 63 Series Connectors (Continued)
Part Number and Ordering
Information
Typical Part Number
Connector part numbers
indicate size, shape, insert
layout, type of seal, style of
contact and polarization.
Note: Pin or socket (power or coaxial)
contacts may be used in either plugs
or receptacles. However, it is recom-
mended that pins be placed in the
receptacle when possible to take
advantage of our “scoop-proof”
design.
(1) For polarizing key positions see MARC 53 Series Connectors.
(2) For contact arrangements see MARC 53 Series Connectors.
Note: If P or S does not appear in the numbering system, no contacts will be supplied with order (order separately).
MD63 06 E 15 61 S N (***)
Modification
Designator
when applicable
(See page 77)
Polarizing position (1)
N, 1, 2, 3, 4, etc. . . .
P — Pin power contact
S — Socket power contact
Insert arrangement number (2)
Shell Size — O.D. of receptacle barrel to nearest 1/16 inch
E — Environmentally sealed
H — Hermetic seal (receptacle only).
Single hole mntng. 00
receptacle
Line cord recept. 01
Box mntng. recpt. 02
Straight plug, bayonet 06
quick disconnect
Series — MD63
or RMD63 style
Configurations
MD63-06E/RMD63-06E
Straight Plug, Bayonet
Coupling, Environmental
and Non-Environmental
(Mates with Receptacles
02, 00 and 01)
A
Master Polarizing
Keyway
B
C
.093
[2.36] Max.
Shell Dimensions
Size A B (Max.) C (Max.)
9.813 1.000 1.288
20.65 25.4 32.72
12 1.000 1.000 1.288
25.40 25.4 32.72
15 1.125 1.000 1.288
28.58 25.4 32.72
18 1.594 1.000 1.288
40.49 25.4 32.72
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
76
MARC 63 Series Connectors (Continued)
Configurations (Continued)
MD63-02E/RMD63-02E
Receptacle, Box Mounting,
Environmental and Non-
Environmental (Mates with
Plug, Type 06)
B
Typ.
A
Typ.
C
Hex.
.093
[2.36]
1.360
[34.54]
.052–.072
[1.32–1.83]
.065–.085
[1.65–2.16]
Max. D
.110–.130
[2.79–3.302] Dia.
4 Holes
Master Polarizing
Key
Shell Dimensions
Size ABC D
9.875 .662 .562 .693-.697
22.23 16.81 14.27 17.60-17.70
12 1.000 .786 .75 .881-.885
25.40 19.96 19.05 22.38-22.48
151.125 .906 .875 1.006-1.011
28.58 23.01 22.23 25.55-25.68
181.344 1.062 1.125 1.250-1.260
34.14 26.97 28.58 30.48-32.00
Panel Cutout
MD63-00E/RMD63-00E
Receptacle, Single Hole
Mounting, Environmental
and Non-Environmental
(Mates with Plug, Type 06)
B
Hex. A
Hex. F
Hex.
C
T
Thread .093
[2.36]
.125
[3.18]
Max.
D
E
Master Polarizing
Key
Panel Cutout
Shell Dimensions
Size A B C D E F T (Class 2A)
9.813 .75 1.360 .669-.673 .693-.697 .562 11/16-32UN
20.65 19.05 34.54 16.99-17.09 17.60-17.70 14.27
12 1.000 .937 1.360 .850-.856 .881-.885 .75 7/8-28UN
25.40 23.80 34.54 21.59-21.74 22.38-22.48 19.05
15 1.125 1.062 1.360 .975-.979 1.006-1.010 .875 1-28UN
28.58 26.97 34.54 24.76-24.87 25.55-25.65 22.23
18 1.625 1.375 1.360 1.212-1.216 1.251-1.255 1.125 1-1/4-28UN
41.28 34.93 34.54 30.78-30.88 31.78-31.88 28.58
MD63-01E/RMD63-01E
Receptacle, Line Cord,
Environmental (Mates with
Plug, Type 06)
B
Master Polarizing Key
C
Hex.
A
.093
[2.36]Max.
Shell Dimensions
Size A B (Max.) C
91.360 .703 .562
34.54 17.86 14.27
12 1.360 .891 .75
34.54 22.63 19.05
15 1.360 1.016 .875
34.54 25.81 22.23
18 1.360 1.203 1.125
34.54 30.56 28.58
.375 [9.53] Max. Panel Thickness
for rear mount applications.
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
77
Circular
Connectors
3
MARC 63 Series Connectors (Continued)
Accessories
Cable Clamps
.156
[3.96]
.225
[5.72] Max. A
T
Thread
B
D
C.156
[3.96]
.225
[5.72] Max.
T
Thread
B
A
Shell Size Part No. A B T Thread
9 086-0175-00N1 .704 .750 1/2-20UNF-2A
17.88 19.05
12 086-0176-00N1 .773 .932 11/16-24UNEF-2A
19.63 23.67
15 086-0177-00N1 .829 1.078 13/16-20UNEF-2A
21.06 27.38
18 086-0178-00N1 .890 1.250 1-28UN-2A
22.61 31.75
Shell Size PartNo. A B(Max.) C (Max.) D T Thread
9 086-0179-00N1 .737 .600 1.100 .879 1/2-20UNF-2A
18.72 15.24 27.94 22.32
12 086-0180-00N1 .913 .785 1.250 1.067 11/16-24UNEF-2A
23.19 19.94 31.75 27.10
15 086-0181-00N1 1.048 .962 1.469 1.233 13/16-20UNEF-2A
26.62 24.43 37.31 31.21
18 086-0182-00N1 1.225 1.185 1.550 1.550 1-28UN-2A
31.12 30.10 39.37 39.37
Straight
Angle
Protective Covers
Shell Receptacle Part No. Plug Part No. Dimensions
Size Without Chain With Chain Without Chain With Chain A B C D
9086-0253-00P2 086-0257-00L6 086-0261-00F5 086-0265-00L6 .813 .950 .813 .913
20.65 24.13 20.65 23.19
12 086-0254-00P2 086-0258-00L6 086-0262-00F5 086-0266-00L6 1.000 .950 1.000 .913
25.40 24.13 25.40 23.19
15 086-0255-00P2 086-0259-00L6 086-0263-00F5 086-0267-00L6 1.125 .950 1.125 .913
28.58 24.13 28.58 23.19
18 086-0256-00P2 086-0260-00L6 086-0264-00F5 086-0268-00L6 1.594 .950 1.594 .913
40.49 24.13 40.49 23.19
Plastic Protective Covers also available; consult Tyco Electronics.
A
B
C
D
Modifications
Weoffer a unique modifica-
tion system which provides
alteration of standard
MARC 63 Series Connectors
to include special finishes,
accessories, and custom
quality assurance
provisions — processing,
testing, serialization,
traceability. Consult your
sales representative or
Tyco Electronics for addition-
al modification information.
Standard modifications
include:
(801): MARC 63 Series
Connector,electroless
nickel finish
(803): MARC 63 Series
Connector including
cable clamp, straight
type
(804): MARC 63 Series
Connector including
cable clamp, right-
angle type
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
78
Contacts for MARC 43, MARC 53 and MARC 63 Connectors
MARC 43, MD53, MD63 Series
MARC RMD53, RMD63 Series
Part Number 083-0009-00R4
(6-1532030-1) 22 AWG Pin
.702
[17.83]
.452
[11.48]
Wire Inspection Hole
.060–.064
[1.52–1.63] Dia..030–.032
[0.76–0.81] Dia.
Part Number 083-1200-00R4
(4-1532036-8) 22 AWG Pin
.767
[19.48]
.515
[13.08]
Wire Inspection Hole
.055–.058
[1.40–1.47]Dia..030–.032
[0.76–.0.81] Dia.
Part Number 082-0461-00Y9
(5-1532030-6) 22 AWG Socket
.505–.525
[12.83–13.33]
Wire Inspection Hole
.051–.055
[1.30–1.40]Dia..055–.058
[1.40–1.47]Dia.
MARC 43, MD53, MD63 Series
Part Number 083-0158-00R4
(8-1532030-1) 16 AWG Pin
.702
[17.83]
.452
[11.48]
Wire Inspection Hole
.086–.090
[2.18–2.29]Dia..061–.063
[1.55–1.60]Dia.
Part Number 082-0113-00T1
(3-1532030-3) 16 AWG Socket
.445–.460
[11.30–11.68]
Wire Inspection Hole
.086–.092
[2.18–2.34]Dia.
MARC 43 Series
Part Number 083-0173-00R4
12 AWG Pin
.702
[17.83]
.452
[11.48]
Wire Inspection Hole
.139–.143
[3.53–3.63] Dia..093–.096
[2.36–2.44] Dia.
.121–.126
[3.07–3.20] Dia.
MARC MD53, MD63 Series
Part Number 083-1435-00R4
(7-1532037-3) 22-20 AWG Pin
.702
[17.83]
.452
[11.48]
Wire Inspection Hole
.068–.072
[1.73–1.83] Dia.
.030–.032
[0.76–0.81] Dia.
.049–.053
[1.24–1.35] Dia.
Part Number 082-0132-00T1
(3-1532030-4) 12 AWG Socket
.445–.460
[11.30–11.68]
Wire Inspection Hole
.121–.126
[3.07–3.20] Dia.
.139–.143
[3.53–3.63] Dia.
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
79
Circular
Connectors
3
Contacts for MARC 43, MARC 53 and MARC 63 Connectors (Continued)
MARC 43, MD53, MD63 Series
Part Number 082-0464-00Y9
(5-1532030-7) 22 AWG Socket
.451–.462
[11.46–11.73]
Wire Inspection Hole
.060–.064
[1.52–1.63] Dia..051–.055
[1.30–1.40]Dia.
MARC 43, MD53, MD63 Series
Solder Type Coaxial
Contacts
B
A
MARC MD53, MD63 Series
Part Number 082-0466-00Y9
22-20 AWG Socket
.451–.462
[11.46–11.73]
Wire Inspection Hole
.068–.072
[1.73–1.83] Dia..051–.055
[1.30–1.40]Dia.
CP Type
B
A
CS Type
MARC 43 Series
LEPRA/CON Crimp Type,
50 Ohm Coaxial Contacts
Part Number 142-1500-0001
CS Socket
.425
[10.80]
.120
[3.05]
Crimp Approx.
Part Number 141-1500-0001
CP Pin
.600
[15.24]
.210–.240
[5.33–6.10]
Crimp Length
Contact Part No. Type A Dia. B
084-0027-00T2 CS .109 .452
50 Ω(5-1532129-8) 2.77 11.48
084-0024-00T2 CP .093 .600
(5-1532129-7) 2.36 15.24
084-0028-00T2 CS .123 .452
75 Ω(5-1532129-9) 3.12 11.48
084-0025-00T2 CP .106 .600
(7-1532155-0) 2.69 15.24
084-0029-00T2 CS .168 .452
95 Ω(5-1532168-1) 4.27 11.48
084-0026-00T2 CP .149 .600
3.78 15.24
Coaxial Contacts
Size Part No. Application Description
086-0001-0000 Unsealed 43 Series
Sealed 43 Series
22 A WG 086-0009-0000 MD53, RMD53
MD63, RMD63
086-0148-0000 RMD53, RMD63
086-0056-0000 Sealed 43 Series
MD53, MD63
16AWG 086-0010-0000 Sealed 43 Series
MD53, MD63
086-0014-0000 Unsealed 43 Series
086-0057-0000 Sealed 43 Series
12 AWG
086-0015-0000 Unsealed 43 Series
22/20 A WG 086-0251-0000 MD53, MD63
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
80
Contact Cavity Sealing Plugs
.447
[11.35]
.047–.055
[1.19–1.40] Dia. .057–.065
[1.45–1.65] Dia.
.940
[23.88] .046–.054
[1.17–1.37] Dia.
.940
[23.88]
.075–.083
[1.91–2.11] Dia.
.452
[11.48] .086–.094
[2.18–2.39]Dia.
.940
[23.88] .125–.133
[3.18–3.38]Dia.
.140–.148
[3.56–3.76] Dia.
.940
[23.88]
.069–.073
[1.75–1.85]
.052–.055
[1.32–1.40]
.049–.053
[1.24–1.35]Dia.
Dia.
Dia.
.421
[10.70] .075–.083
[1.91–2.11] Dia.
.447
[11.35] .140–.148
[3.56–3.76]
.121–.129
[3.07–3.28] Dia.
Dia.
.421
[10.70] .045–.053
[1.14–1.35] Dia.
Size Part No. Application A Dia. B Dia. Description
5052 086-0061-0000 .112-.120 —
2.84-3.05
7552 086-0062-0000 Unsealed 43 Series .135-.143 —
3.43-3.63
9552 086-0063-0000 .178-.186 —
4.52-4.72
5052 086-0058-0000 .081-.089 .112-.120
2.06-2.26 2.84-3.05
7552 086-0059-0000 Sealed 43 Series .106-.114 .135-.143
2.69-2.90 3.43-3.63
9552 086-0060-0000 .151-.159 .178-.186
3.84-4.04 4.52-4.72
.388
[9.86]
A
Dia.
.913
[23.19]
A
Dia.
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
81
Circular
Connectors
3
Assembly Tools
MARC 43, 53 and 63 Series
Connectors
Removal Tool —None required.
Crimp Tools —Turret style tool
(M22520/1-01 and TH88) MICRODOT
Part Number 010-0080-0000 — Crimps
all power contacts.
Locator Style Tool —MICRODOT
Part Number 010-0070-0000 with
locators.
Contact Size Wire Size Locator
22 22, 24 010-0072-0000
22 26 010-0087-0000
16 16, 18 010-0075-0000
For MARC 43 Series Connector Crimp Coax Contacts
Use 010-0132-0000 & 010-0169-0000.
MARC 73 Series Connectors
Description Part No.
Crimp Tool w/ Locator 010-3008-0000
Crimp Tool Only 010-3009-0000
M22520/2-01
Locator Only 010-3010-0000
Description Part No.
Crimp Tool w/ Locator 010-3002-0000
Crimp Tool Only 010-0190-0000
Locator Only 010-3007-0000
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
82
MARC 73 Series Connectors
Service and Performance Data
MARC 73 Series Connectors meet or exceed the performance requirements of specification MIL-C-38999. Your sales rep-
resentative or field engineer can supply detailed, cross-reference information. MARC 73 Series Connectors meet the fol-
lowing selected test parameters as specified below:
DESCRIPTION TEST REQUIREMENTS
Contact Retention Contacts are to withstand 10 lbs [44.48 N] axial load without axial displacement
in excess of 0.012 [0.30] or damage to contacts or inserts when the axial load is
applied to the mating end of the contacts in unmated plugs and receptacles at a
rate of approximately 1 lb/sec. [4.45 N].
Contact Resistance The potential drop across normally mated contacts shall not exceed 25 mv
under room ambient and high temperature service conditions when measured
as specified in MIL C-39029 with maximum rated current.
Dielectric Withstanding No evidence of dielectric breakdown or flashover when mated and unmated
Voltage, Altitude and Sea Level plugs are subjected to 645 and 180 volts RMS, respectively, at altitudes up to
70,000 feet [21,336 m] and 1000 volts RMS at sea level.
Insulation Resistance, Insulation resistance of mated plugs and receptacles shall be 5000 megohms,
Room and High Temp. minimum, at room temperature and 1000 megohms, minimum, at 257°F
[+125°C] when measured per MIL-STD 202, Method 302, Test Condition B.
Coupling and Uncoupling Plugs and receptacles shall withstand up to 500 cycles of engagement and
separation without detrimental damage to plugs or receptacles or not satisfying
subsequent tests.
Fluid Immersion Mating and unmating forces shall not exceed 27 Ibs [120.10 N] maximum,
(15 shell size) after fully wired plugs and receptacles are immersed for 20 hours,
each, in hydraulic fluid (MIL-H-5606) and high temperature lubricating oil
(MIL-L-9236) followed by a one-hour dry.
Sweep Vibration, Mated Mated connectors shall show no circuit interruptions greater than one microsec-
ond during 12 hours vibration to include six sweeps in each axis at extreme tem-
peratures of -85°F [-65°C] and 257°F [+125°C] per MIL-STD-202, Method 204,
Test Condition D. Post inspection shall show no detrimental cracking, breaking,
or loosening of parts.
MoistureResistance The insulation resistance of mated connectors shall exceed 1000 megohms after
subjection to moisture resistance testing per MIL-STD-202, Method 106.
Altitude Breathing The insulation resistance of wired and mated connectors shall be 5000
megohms, minimum, and thereshall be no flashover or br eakdown at test voltage
of 1000 volts RMS after the third cycle and while immersed in 5% salt water
solution at 68°F [20°C] and room ambient pressure at 68°F [20°C].
Salt Spray Unmated plugs and receptacles shall show no excessive corrosion which
would detrimentally affect the electrical and mechanical performance of the
connectors after subjection to 24 hours exposure to salt spray atmosphere per
MIL-STD-202, Method 101.
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
83
Circular
Connectors
3
MARC 73 Series Connectors (Continued)
Service and Performance Data
I. Electrical — Electrical Ratings
Current Rating Dielectric Working Voltage Contact
Contact (Amperes, Withstanding Resistance
Size Max., 81°F [+27°C]) Voltage (RMS) Sea Level 110,000 Ft. Alt.1(Millivolts, Max.)
22AWG 5 1000 750 300 8
1110,000 ft = 33,528 m
II. Mechanical —Durability: 500 Cycles Mate/Unmate.
Coupling/Uncoupling Forces and Tightening Torques:
Coupling/
Shell Uncoupling Tightening Torque (In-Lbs.)
Size Force Retaining Nut Mounting Nut
(In-Lbs.) Max.
9 10 [44.48] 20 [2.26 N] Max. 30-45 [3.39 Nm – 5.08 Nm]
12 15 [66.72] 20 [2.26 N] Max. 40-55 [4.52 Nm – 6.21 Nm]
15 22 [97.86] 20 [2.26 N] Max. 55-70 [6.21 Nm – 7.91 Nm]
18 28 [124.55] 20 [2.26 N] Max. 70-85 [7.91 Nm – 9.60 Nm]
Operating Temperature: -67°F to 257°F [-55°C to +125°C].
Connector Mated Length: 2.217 [56.31] Max.
PartNumber and
Ordering Information MARC 73 Series Connector
part numbers indicate size,
shape, insert layout, type of
seal, style of contact and
polarization.
MD73 06 E 15 91 P N (***)
Modification
Designator
when applicable
Polarizing position
N, 1, 2, 3, 4, etc. . . .
P — Pin power contact
S — Socket power contact
Insert arrangement number
Shell Size — O.D. of receptacle barrel to nearest .062 [19.05] inch
E — Environmentally sealed
Single hole mntng. 00
receptacle
Line cord receptacle 01
Box mntng. receptacle 02
Straight plug, bayonet 06
quick disconnect
Series — MD73
Notes: Pin contacts in plug; socket contacts in receptacle.
If P or S does not appear in the numbering system, no contacts will be supplied with order (order separately).
Contact Arrangements1
Insert Arrangement 29-27312-61315-913
Number of Contacts 27 61 91
Contact Size 22 AWG 22 AWG 22 AWG
1Views shown are front face views of receptacles. Front face view of plug is mirror image of that shown.
2Arrow ( )indicates insert top or vertical position in relation to top or vertical position of housing.
3The 22 AWG contact arrangements will accommodate MIL-W-16878 Type ET, 22, 24, 26 AWG wire. Contact spacing
is on 0.065 [1.65] centers.
Shell Size 9 Shell Size 12 Shell Size 15
Wire Range Accommodations
Wire Wire O.D. of Finished Wire Wire Spec.
Barrel Size
Size (AWG) Range Nominal MIL-W-16878
26.029 Min. .031 Nom. Type “E” or “ET”
0.74 0.79
22AWG 24 — .036 Nom. Type “ET”
0.91
22 .044 Max. .042 Nom. Type “ET”
1.12 1.07
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
84
MARC 73 Series Connectors (Continued)
Configurations
MD73-06E
Straight Plug, Bayonet
Coupling, Environmental
and Non-Environmental
(Mates with Receptacles
02, 00 and 01)
A
Master Polarizing
Keyway
B
C
.093
[2.36]Max.
Shell Dimensions
Size A B (Max.) C (Max.)
9.813 1.000 1.288
20.65 25.40 32.72
121.000 1.000 1.288
25.40 25.40 32.72
151.125 1.000 1.288
28.58 25.40 32.72
18 1.594 1.000 1.288
40.49 25.40 32.72
MD73-02E
Receptacle, Box Mounting,
Environmental and Non-
Environmental (Mates with
Plug, Type 06)
.052–.072
[1.32–1.83] .065–.085
[1.65–2.16]
.093
[2.36]
.110–.130
[2.79–3.30]
4 Holes
B
Typ.
A
Typ.
Dia.
Master Polarizing
Key
C
Hex.
1.360
[34.54]
Max.D
Shell Dimensions
Size ABCD
9.875 .662 .562 .693-.697
22.23 16.81 14.27 17.60-17.70
12 1.000 .786 .75 .881-.885
25.40 19.96 19.05 22.38-22.48
15 1.125 .906 .875 1.006-1.011
28.58 23.01 22.23 25.55-25.68
18 1.344 1.062 1.125 1.250-1.260
34.14 26.97 28.58 31.75-32.00
MD73-00E
Receptacle, Single Hole
Mounting, Environmental
and Non-Environmental
(Mates with Plug, Type 06)
.093
[2.36]
B
Hex. A
Hex.
Master Polarizing
Key
C
T
Thread
F
Hex.
Max.
D
E
.125
[3.18]
Shell Dimensions
Size A B C D E F T (Class 2A)
9.813 .75 1.360 .669-.673 .693-.697 .562 11/16-32UN
20.65 19.05 34.54 16.99-17.09 17.60-17.70 14.27
12 1.000 .937 1.360 .850-.856 .881-.885 .75 7/8-28UN
25.40 23.80 34.54 21.59-21.74 22.38-22.48 19.05
15 1.125 1.062 1.360 .975-.979 1.006-1.010 .875 1-28UN
28.58 26.97 34.54 24.77-24.87 25.55-25.65 22.23
18 1.625 1.375 1.360 1.212-1.216 1.251-1.255 1.125 1-1/4-28UN
41.28 34.93 34.54 30.78-30.89 31.78-31.88 28.58
Panel Cutout
Panel Cutout
.375 [9.53] Max. Panel Thickness
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
85
Circular
Connectors
3
MARC 73 Series Connectors (Continued)
Configurations (Continued)
MD73-01E
Receptacle, Line Cord,
Environmental (Mates with
Plug, Type 06)
BC
Hex.
.093
[2.36]
AMax.
Master Polarizing
Key
Shell Dimensions
Size A B (Max.) C
91.360 .703 .562
34.54 17.86 14.27
121.360 .891 .75
34.54 20.57 19.05
15 1.360 1.016 .875
34.54 25.81 22.23
18 1.360 1.203 1.125
34.54 30.56 28.58
Accessories
Cable Clamps
.156
[3.96]
.225
[5.72]
B
A
Max.
TThread
Shell Size Clamp PartNo. A B T Thd. 2A
9 086-0341-00N1 .704 .750 1/2-20 UNF
17.88 19.05
12 086-0342-00N1 .773 .932 11/16-24 UNEF
19.63 23.67
15 086-0343-00N1 .829 1.078 13/16-20 UNEF
21.06 27.38
18 086-0344-00N1 .890 1.250 1-28 UN
22.61 31.75
.225
[5.72]
.156
[3.96]
D
TThread
C
Max. B
A
Shell Size Clamp Part No. A B (Max.) C (Max.) D T Thd. 2A
9 086-0337-00N1 .737 .600 1.100 .879 1/2-20 UNF
18.72 15.24 27.94 22.33
12 086-0338-00N1 .913 .785 1.250 1.067 11/16-24 UNEF
23.19 19.94 31.75 27.10
15 086-0339-00N1 1.048 .962 1.469 1.233 13/16-20 UNEF
26.62 24.43 37.31 31.32
18 086-0340-00N1 1.225 1.185 1.550 1.550 1-28 UN
31.12 30.10 39.37 39.37
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
86
MARC 73 Series Connectors (Continued)
Accessories (Continued)
Contacts
Twist pin — 22 Pins and
Sockets
Copper alloy plated .000050 [0.00127]
gold over copper flash per MIL-G-45204,
Type II
Rating —5amps
Contact Resistance —.008 ohms
max.
Engineering/Separation Forces —
6oz. [1.67 N] max. / .502 [.139 N] min.
Durability —2000 cycles
Contact Cavity Sealing Plugs
.250
[6.35]
.415
[10.54]
.035
[0.89]
.034
[0.86] .050
[1.27]Dia.
Dia. Dia.
.680
[17.27] .250
[6.35]
.042
[1.07] .030
[0.76]
.050
[1.27] Dia.
Dia.
.030–.032
[0.76–0.81] Dia.
Dia.
.800
[20.32]
.035–.041
[0.89–1.04]
.264
[6.71]
.437
[11.10]
.264
[6.70] .036–.044
[0.91–1.10]
Contact Size Sealing Plug Filler Plug
22 AWG 086-0331-0000 086-0330-0000
Note: Sealing plug occupies insert and grommet cavities.
Filler plug occupies insert cavity only.
Part Number 096-0526-0000
Part Number 086-0331-0000 Part Number 086-0330-0000
Part Number 096-0626-0001
Catalog 1308638 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-3611-1514
Revised 8-05 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-5-729-0425 UK: 44-141-810-8967
Circular Connectors
87
Circular
Connectors
3
MQR Series — Microminiature Circular Connectors
MQR stands for MICRODOT
Quick Release. This line of
circular quick disconnect
connectors has metal shells
with push-pull couplings
which provide a positive
connection for rugged
environmental use. The
MQR series is specified for
cable-to-cable and cable-
to-panel applications.
The plug connector side
contains socket contacts.
The receptacle connector
side contains pin contacts.
Because the pin contact is
“active” or “live”, the pins
require the physical protec-
tion that the receptacle side
offers. (Similar to a “protect-
ed” or “shrouded” header.)
While there is no optional
hardware for the MQR
series, the receptacles
incorporate a standard jam
nut to tighten the connector
down to the board or panel.
MQR connectors are
manufactured to the per-
formance specifications of
MIL-DTL-83513.
How to Specify/
Ordering Code
MQR A 37 P 6 A 1 18.0
Length in Inches (Min.)
X — Special, Does not fit description.
Insulation Color or Finish
1 — All white 6 — Bare (unfinished)
2— All yellow 7 — Color coded per MIL-STD-681, System I
3 — All gray 9 — 10 Solid color repeating (starts with black)
4 — Gold plated
5 — Tin dipped gold plated
Wire Type
A — Type E, 7 strand
B — Type ET, 7 strand
C — Type E, 19 strand
D — Type ET, 19 strand
F — 7 strand per MIL-W-22759/11
(28 AWG only)
G — 19 strand per MIL-C-22759/11
26 AWG, 24 AWG
L — Copper, solid
Q — Stranded per MIL-W-22759/33
Wire Size
4 — 24 AWG 5 — 25 AWG 6 — 26 AWG 8 — 28 AWG 0 — 30 AWG
Per MIL-W-16878
{
Connector Series
Shell, Material &Finish
A — Aluminum, Electroless Nickel Finish
B — Brass, Sulfamate Nickel Finish
Number of Contacts**
7, 19, 37*
Shell
P — Plug (Socket Contact)
F—Receptacle, Front Panel Mount
(Pin Contact)
R—Receptacle, Rear Panel Mount
(Pin Contact)
S— Solder pot
*uses twist pin contacts
** Other non-standard sizes are also available,
contact Tyco Electronics for details.
Front Panel Mount (MQR Receptacle)
Dimensions
Size A(Hex) B(Min.) Ø C (Min.) D Thd.
7.500 .361 .376 3/8-32 UNEF-2A
12.7 9.17 9.55
19 .625 .477 .501 1/2-28 UNEF-2A
15.88 12.16 12.73
37 .812 .722 .751 3/4-20 UNEF-2A
20.62 18.39 19.07
A
Hex.
.400
[10.16] B
Min.
Ø C
Min.
Key
DThd.
Mounting Hole
For Front Panel Mount
Front Panel Mount (19 Position Shown)