MICRODOT and NANONICS Connectors MICRODOT and NANONICS Connectors Tyco Electronics Corporation Harrisburg, Pennsylvania www.tycoelectronics.com 1308638 10M GIC CGX 8-05 MICRODOT and NANONICS Connectors MICRODOT Connectors Disclaimer While Tyco Electronics has made every reasonable effort to ensure the accuracy of the information in this catalog, Tyco Electronics does not guarantee that it is error-free, nor does Tyco Electronics make any other representation, warranty, or guarantee that the information is accurate, correct, reliable or current. Tyco Electronics reserves the right to make any adjustments to the information contained herein at any time without notice. Tyco Electronic expressly disclaims all implied warranties regarding the information contained herein, including but not limited to any implied warranties or merchantability or fitness for a particular purpose. It is recommended that you test any new or replacement product before incorporating into a system. The dimensions in this catalog are for reference purposes only and are subject to change without notice. Dimensions are in inches over [millimeters], unless otherwise specified. Always consult our customer drawings for recommended PC board layout and panel cutout dimensions; do not use catalog dimensions. Specifications are subject to change without notice. NANONICS Connectors Consult Tyco Electronics at 1-800-5226752 for latest dimensions and design specifications, or use our global contact list shown on inside back cover. (c) Copyright 2001 and 2005 by Tyco Electronics Corporation. All Rights Reserved. COMBOMATE, DUALOBE, JACKMATE, LEPRA/CON, MARC 53, MARC 63, MARC 73, MICRODOT, NANONICS, and TYCO are trademarks. Other products, logos, and Company names mentioned herein may be trademarks of their respective owners. MICRODOT and NANONICS Connectors Main Table of Contents MICRODOT Microminiature D Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . 5-35 Rectangular Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37-54 Circular Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55-90 Coaxial Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91-136 NANONICS DUALOBE Rectangular Connectors . . . . . . . . . . . . . . . . . . . . 141-178 Circular Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179-196 Coaxial Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197-206 Strip Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207-214 Part Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215-218 i Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 MICRODOT and NANONICS Connectors Engineering Notes ii Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 MICRODOT Connectors Table of Contents Microdot Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Microminiature D Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-35 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 MCK/MCD/MCDM Series Metal and Plastic Shell Connectors . . . . . . . . . . . . . . . . . . . . . . 6 How To Specify MCK and MCD Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Contact Arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 MCK Series Metal Shell Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 MCK Series Metal Shell Connectors Panel Mounting -- Cutout Dimensions . . . . . . . . . . 10 MCD Series Plastic Shell Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11, 12 MCD Series Plastic Shell Connectors Panel Mounting -- Cutout Dimensions . . . . . . . . . 13 Mounting and Coupling Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 15 MCK Transition Blocks RT1 -- Right Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-18 ST1 -- Straight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-21 MCK ST2 Series Straight Mount PCB Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22-24 MCDM Series Metal Shell Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25, 26 MCDM Series Metal Shell RF COMBOMATE Connectors . . . . . . . . . . . . . . . . . . . . . . 27-29 MCDM Series Metal Shell Connectors Panel Mounting -- Cutout Dimensions . . . . . . . . 30 MIL-DTL-83513 Cross Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31-35 Rectangular Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37-54 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 TWIST Pin Contact Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 MCE Plastic MCE Series Plastic Shell Edgeboard Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . 39-41 Technical & Performance Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Mother Board & Daughter Board Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 How To Specify . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 MCEM Metal Shell MCEM Series Metal Shell Edgeboard Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . 42-45 Performance Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 128 Layout Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43, 44 How To Specify . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 184 Layout Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 MCJ Plastic MCJ Series Plastic Shell Center Jackscrew Connectors . . . . . . . . . . . . . . . . . . . . . 46, 47 10 & 14 Layout Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 26, 38 & 46 Layout Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 How To Specify . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Contact Arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 MCJM Metal Shell MCJM Series Metal Shell Center Jackscrew Connectors. . . . . . . . . . . . . . . . . . 46, 48, 49 Technical & Performance Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Plug & Receptacle Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 49 How To Specify . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 1 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 MICRODOT Connectors Table of Contents (Continued) MCS .050 [1.27] Centerline MCS Series Strip Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Strip Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 How To Specify . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 High Density Standard Module (HDSM) Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . 51-54 Circular Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57-92 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55, 56 MARC 43 General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Materials and Finishes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Service & Performance Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Test Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Contact Arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Part Number & Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Polarizing Key Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Shell Configurations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60-62 Cable Clamps, Contacts, Sealing Plugs, Protective Covers & Modifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 MARC 53 General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Materials and Finishes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Service & Performance Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Test Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Contact Arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Part Number & Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Polarizing Key Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Shell Configurations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69-71 Test Adapters, Protective Covers, Cable Clamps & Modifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72, 73 MARC 63 Performance Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Part Number & Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Shell Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75, 76 Cable Clamps, Protective Covers & Modifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 MARC 43, 53, 63 Contacts & Sealing Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78-80 MARC 43, 53, 63, 73 Assembly Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 MARC 73 Service & Performance Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82, 83 Part Number & Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Shell Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84, 85 Cable Clamps, Contacts & Sealing Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85, 86 MQR Series - Microminiature Circular Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . 87, 88 MTC Series - Microminiature Circular Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . 89, 90 2 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 MICRODOT Connectors Table of Contents (Continued) Coaxial Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91-136 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 Standard Coaxial Connectors Performance Data/Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 Screw-On Series (S) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93-98 Slide-On Series (SOS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99-102 Quick-Connect Series (QC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103-105 Twinax Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 Triax Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 Terminals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 Module Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 Caps For Screw-On Jacks and Receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 Feed Thru Adapters, Screw-On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 BNC/TNC Adapters to: Screw-On Series (S) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110, 111 Slide-On Series (SOS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 Quick-Connect (QC). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 Gold Plated Crimp Style Coaxial Connectors Performance Data/Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 Screw-On Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113-116 Assembly Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 LEPRA/CON Ultra Miniature Connectors Performance Data/Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117 Screw-On Series -- Standard Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118, 119 Screw-On Series -- Locking Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120, 121 Slide-On Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122, 123 Assembly Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 BNC / LEPRA/CON Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124, 125 Snap-Lock Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 Cable Assemblies Ordering Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 Mating Interface Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 Cable Acceptance Dimensions Standard Coaxial Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129-133 Gold Plated Crimp Style Coaxial Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133, 134 LEPRA/CON Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 Hermetic Connectors Coaxial Screw-On, Slide-On Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135, 136 3 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 MICRODOT Connectors MICRODOT Introduction MICRODOT Connector products have a fifty-year heritage of leadership in precision design and manufacturing of innovative and cost-effective interconnects. These innovative and costeffective products offer interconnect solutions for a broad range of applications in the Aerospace, Military, Medical, Instrumentation, Communications and Computer markets. The MICRODOT reputation for hands-on experienc and outstanding technical support is now enhanced as part of Tyco Electronics Corporation. From standard Mil-Spec configurations to custom designs, we have the Micro-D, subminiature and ultra-miniature coaxial, custom hermetic and space-related cylindrical connectors to meet your need, whether it is build-toprint assemblies, or total turn-key assembly program management. MICRODOT connectors have met the rigorous demands imposed in manned space flight, military and commercial satellites, critical medical applications, and geophysical exploration. 4 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Microminiature D Connectors Microminiature D Connectors Microminiature D Connectors Product Facts n n n n n n Designed for both military and commercial applications Low engaging force is achieved by the manner in which Twist Pin Contacts are designed The metal shell and plastic shell are available with solder cup and solid or stranded wire terminations 1 Mating force maximum is 10 oz. [2.78N] times the number of contacts Durability -- No known mechanical or electrical issues detrimental to the function of the connectors after 500 cycles of mating and unmating Current Rating -- 3 amps max per contact MICRODOT Connectors MCK and MCD High Density Microminiature "D" Connectors described in this catalog comprise a complete connector system, which is adaptable to a numerous variety of form factors. Low engaging force is achieved by the manner in which the twist pin contacts are designed. By constructing the male contact as a breathing helical spring, electrical contact is achieved at many points around the periphery of the pin bundle rather than at a few discrete points, as in conventional pin designs. Normal twist pin engagement force is 6 oz. [1.67N] typically and 8 oz. [2.22N] maximum. The low force twist pins exhibit an engaging force of 4 oz. [1.11N] typically and 5 oz. [1.39N] maximum. Low force twist pins are standard in MIL-DTL-83513 configurations of MCK and MCD connectors and may be supplied as an option in all other configurations. The MCK and MCD Series of connectors featured in this catalog are designed to meet the applicable requirements of MlL-DTL-83513, for intermateability, interchangeability, and performance. Designed for both military and commercial applications, the MCK's and MCD's are especially well suited for use in miniaturized airborne and space electronics, computers, and test equipment. The metal shell MCK's and plastic shell MCD's are available with solder cup, and solid or stranded wire terminations. MCK transition blocks are standard for printed circuit board mounting. Custom termination configurations for both MCK and MCD can be accommodated. Micro D's are also supplied in wired harness assemblies. 5 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Microminiature D Connectors MCK/MCD/MCDM Series Metal and Plastic Shell Connectors Technical and Performance Data (Applicable to MCK, MCD and MCDM unless otherwise noted) Electrical Environmental Contacts -- Pin 24 AWG twist pin, Socket 24 AWG precision machined barrel, Wire Range 24 AWG to 30 AWG solid and stranded. Temperature Range -- -67F to 257F [-55 C to +125C] for MCK/MCD, -67F to 302F [-55C to +150C] for MCDM. Contact Resistance -- (voltage drop) 25 millivolts max. at 3 amps, 77 7.4F [25 3 C]. Vibration -- No discontinuity in excess of 1 sec. when tested in accordance with MIL-STD-1344, Method 2005, test Condition IV. Current Rating -- 3 amps max. per contact. Dielectric Withstanding Voltage -- Volts RMS 60 Hz at room ambient. At sea level 600V solder pots, 750V wire terminations & transition blocks. At 70,000 ft. [21,336 m] 150V solder pots, 200V wire terminations & transition blocks. Insulation Resistance -- 5,000 megohms min. (@ 500 VDC) at ambient room temperature. Magnetic Permeability -- 2 mu max. Mechanical Contact Spacing -- .050 [1.27mm] centers. Contact Engagement & Separation -- Standard contact engaging force is 6.0 oz. [1.67N] (8.0 oz. [2.22N] max.). Separation force is 0.5 [.14N] oz. min. Mating Force Maximum -- Calculated as 10 oz. times the number of contacts. Solderability -- Connectors shall pass the test requirements of MIL-STD202, Method 208 Shock -- No discontinuity in excess of 1 sec. when tested in accordance with MIL-STD-1344, Method 2004, test Condition E. Durability -- No mechanical or electrical defects detrimental to the function of the connectors after 500 cycles of mating and unmating. Humidity -- After exposure to humidity as specified by MIL-STD-1344, Method 1002, Type II, IR shall be 1 megohm min. following step 7a of Method 1002 and 1000 megohms min. after 24 hours of conditioning per Method 1002. Salt Spray -- Connectors shall meet the performance requirements of contact resistance, mating and unmating forces, and contact retention after being subjected to the 48-hour 5% solution salt spray test per MIL-STD-1344, Method 1001, Condition B. Fluid Immersion -- Unmated connectors after being fully immersed in one of the following fluids, for the prescribed time, will mate at a force of 10 oz. [2.78N] times the number of contacts or less: Perchloroethylene, 2 hours; Lubricating oil per MIL-L-23699, 20 hours. Insert Retention -- Inserts will withstand a 50 lb. [34N/cm2] per square inch load in either direction. Crimp Termination Tensile Strength -- (Unassembled contacts with crimped stranded wire terminations) Wires will not pull out of contacts when the following axial loads are applied: 24 AWG, 5 lbs. [22.24N]; 26 AWG, 4 lbs. [17.79N]; 28 AWG, 3 lbs. [13.34N] Outgassing -- When tested in accordance with SP-R-0022, Total Mass Loss (TML) shall be less than 1.0% and Volatile Condensable Material (VCM) shall be less than 0.1% of the original specimen. Materials and Finishes Contacts -- Copper alloy plated with .000050 [.00127] gold over copper flash per MIL-G-45204 Type II. Hardware -- see pages 14 and 15. Transition Block Shell -- Liquid crystal polymer (LCP) per ASTM D5138, or Polyphenylene sulfide GST-40F per ASTM D5927 or MIL-M-24519 Potting Material -- Epoxy, Black MCD-Plastic Shell -- Insulator/Body -- Polyester, glass filled per MIL-M-24519, Liquid crystal polymer (LCP) per ASTM D5138, or Polyphenylene sulfide GST-40F per ASTM D5927 or MIL-M-24519 Wire Terminations -- Solid copper per QQ-W-343 gold plated per MIL-G-45204 Stranded TEFLON insulated per MIL-W16878 Stranded TEFLON insulated per MIL-W22759/11, /33 Solid copper per QQ-W-343, solder dipped (Transition block) MCDM-Metal Shell -- Insulator -- Diallyl Phthalate per MILM-14, Type SDG-F Body Shell -- Aluminum alloy--high grade, nickel plated MCK-Metal Shell -- Insulator -- Liquid crystal polymer (LCP) per ASTM D5138, or Polyphenylene sulfide GST-40F per ASTM D5927 or MIL-M-24519 Interfacial Seal -- Fluorosilicone Rubber per MIL-R-25988 (socket side only) Body Shell -- Aluminum alloy-high grade plated Cadmium per QQ-P-416 Nickel, electroless per AMS 2404 Twist Pin, Pin and Socket Contacts The contact spring member normally found in socket contacts has been eliminated by creating a breathing helical spring principle on the pin contact -- smaller, more durable contacts can be manufactured economically. Wire range 24-36 AWG solid & stranded. MIL-DTL-83513 -- Only the descriptive legend in bold italic is applicable to current MIL-DTL-83513 configurations; MIL-DTL-83513/1 through /4 -- MCK metal shell; MIL-DTL-83513/6 through /9 -- MCD plastic shell. In addition, MIL-DTL-83513 solid copper wire termination is specified 25 AWG, 0.5; and 1.0 [25.4] lengths only and stranded insulated wire termination is specified 26 AWG, 18.0 [457.2] and 36.0 [914.4] lead lengths only. Hardware for MIL-DTL-83513 configurations is specified separately by the M83513/5-XX designation. M83513/1 through /4 and /6 through /9 specify no hardware (B). Mounting/mating hardware is shown on page 14 with the applicable military nomenclature. The MICRODOT catalog part number for a MIL-DTL-83513 configuration may be constructed to include the desired hardware. See pages 31-35 for M83513/ cross reference. 6 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Microminiature D Connectors How To Specify MCK and MCD Connectors Microminiature D Connectors Metal Shell S -- Solder pots 26 AWG max. X -- Special, not described by legend. MCK- C2 B 37 P 6 A 1 18.0 Lead Length in Inches (Min.) Connector Series Shell Finish Insulation Color or Finish C1 -- Cadmium, Clear C2 -- Cadmium, Yellow Chromate N1 -- Nickel, Electroless 1 -- All white wire 6 -- Bare (unfinished) 2 -- All yellow wire 7 -- Color coded per MIL-STD-681, System 1 3 -- All gray wire 8 -- Special color code 4 -- Gold plated 9 -- 10 Solid color repeating per M-83513 5 -- Tin dipped gold plated Hardware (See Pages 14 and 15) B -- No Hardware F -- Float Bushing K, KM -- Jackscrew, Slotted Head, High Profile (9-51) H, HM -- Jackscrew, Slotted Head, High Profile (100) L, LM -- Jackscrew, Slotted Head, Low Profile (9-51) J, JM -- Jackscrew, Slotted Head, Low Profile (100) Q, QM -- Jackscrew, Allen Head, High Profile (9-51) T, TM -- Jackscrew, Allen Head, High Profile (100) R, RM -- Jackscrew, Allen Head, Low Profile (9-51) N, NM -- Jackscrew, Allen Head, Low Profile (100) P -- Jackpost Assembly (9-51) S -- Jackpost Assembly (100) X -- Lockscrew, Slotted Head Y -- Lockscrew, Allen Head Z -- Clip and Key (Clip Mount Only) 1 Wire Type Per MIL-W-16878 { A -- Type E, 7 strand B -- Type ET, 7 strand C -- Type E, 19 strand D -- Type ET, 19 strand F -- 7 strand per MIL-W-22759/11 (28 AWG only) G -- 19 strand per MIL-C-22759/11 (26 AWG only), 24 AWG L -- Copper, Solid (25 AWG only) Q -- Stranded per MIL-W-22759/33 (26 AWG only) Wire Size 4 -- 24 AWG 5 -- 25 AWG 6 -- 26 AWG 8 -- 28 AWG 0 -- 30 AWG Layout 9, 15, 21, 25, 31, 37, 51, 100 See contact arrangement Contact Type P -- Pin (Plug) S -- Socket (Receptacle) Plastic Shell S -- Solder pots 26 AWG max. X -- Special -- Does not fit description below. MCD R3 B 37 P 6 A 1 18.0 Lead Length in Inches (Min.) Connector Series Insulator Type/Material Insulation Color or Finish G2 -- Clip Mount, polyester, natural G3 -- Screw Mount, polyester, natural, .093 Flg. R2 -- Clip Mount, Ryton R3 -- Screw Mount Liquid Crystal Polymer or Polyphenylene Sulfide 1 -- All white wire 6 -- Bare (unfinished) 2 -- All yellow wire 7 -- Color coded per MIL-STD-681, System 1 3 -- All gray wire 8 -- Special color code 4 -- Gold plated 9 -- 10 Solid color repeating per M-83513 5 -- Tin dipped gold plated Wire Type Hardware (See Pages 14 and 15) B -- No Hardware F -- Float Bushing K, KM -- Jackscrew, Slotted Head, High Profile L, LM -- Jackscrew, Slotted Head, Low Profile Q, QM -- Jackscrew, Allen Head, High Profile R, RM -- Jackscrew, Allen Head, Low Profile P -- Jackpost Assembly X -- Lockscrew, Slotted Head Y -- Lockscrew, Allen Head Z -- Clip and Key (Clip Mount Only) Per MIL-W-16878 { A -- Type E, 7 strand B -- Type ET, 7 strand C -- Type E, 19 strand D -- Type ET, 19 strand F -- 7 strand per MIL-W-22759/11 (28 AWG only) G -- 19 strand per MIL-C-22759/11 (26 AWG only), 24 AWG L -- Copper, Solid (25 AWG only) Q -- Stranded per MIL-W-22759/33 (26 AWG only) Layout Wire Size 9, 15, 21, 25, 31, 37, 51 See contact arrangement 4 -- 24 AWG 5 -- 25 AWG 6 -- 26 AWG 8 -- 28 AWG 0 -- 30 AWG Contact Type P -- Pin (Plug) S -- Socket (Receptacle) Note: Items in bold italic are qualified to MIL-DTL-83513. 7 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Microminiature D Connectors Contact Arrangements Face View of Pin Insert (Socket Side is Mirror Image) 1 1 5 9 6 9 12 15 15 Contacts 9 Contacts 11 1 8 1 8 9 15 23 13 1 1 16 14 25 25 Contacts 21 21 Contacts 17 24 30 Contacts (MCDM Only) 30 16 31 31 Contacts 1 1 18 19 19 20 37 Contacts 37 35 36 51 Contacts 51 26 1 27 51 75 52 100 76 100 Contacts (MCK Only) Note: MCK metal shells are not designed to intermate or interchange with MCD plastic shells. If metal/plastic intermating is desired, use MCDM Series Metal Shell on pages 25 and 26 with MCD Series Plastic Shell on page 11. 8 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Microminiature D Connectors MCK Series Metal Shell Connectors Two Mtg. Holes O.092.004 (9-51 ) [2.340.10] F Contact #1 O.145 - .150 (100 ) [3.68 - 3.81 ] Pin Microminiature D Connectors Dimensions per MIL-DTL-83513 E A .183.003 [4.650.08] B .406.010 [10.310.25] Crimp or Solder 1 Pin Pin .093.005 [2.360.13] Plug (Pin side) C D F Contact 1 # oTw Mtg. Holes O.092.004 (9-51 ) [2.340.10] Socket O.145 - .150(100 ) [3.68 - 3.81 ] E A .195.003 [4.950.08] B Receptacle (Socket side) .419.010 [10.640.25] Crimp or Solder Socket Socket .093.005 [2.360.13] D C Part Number A .010 [.254] MCK**- 9P*** .775 19.68 .775 19.68 .925 23.50 .925 23.50 1.075 27.30 1.075 27.30 1.175 29.84 1.175 29.84 1.325 33.66 1.325 33.66 1.475 37.46 1.475 37.46 1.425 36.20 1.425 36.20 2.160 54.86 2.160 54.86 MCK**- 9S*** MCK**- 15P*** MCK**- 15S*** MCK**- 21P*** MCK**- 21S*** MCK**- 25P*** MCK**- 25S*** MCK**- 31P*** MCK**- 31S*** MCK**- 37P*** MCK**- 37S*** MCK**- 51P*** MCK**- 51S*** MCK**- 100P*** MCK**- 100S*** B Max. .3338 8.48 .4018 10.21 .4838 12.29 .5518 14.02 .6338 16.10 .7018 18.05 .7338 18.64 .8018 20.37 .8838 22.45 .9518 24.18 1.0338 26.26 1.1018 27.99 .9838 24.99 1.0518 26.72 1.3838 35.15 1.508 38.30 C +.010 [.254] -.018 [.457] .390 9.91 .390 9.91 .540 13.72 .540 13.72 .690 17.53 .690 17.53 .790 20.07 .790 20.07 .940 23.88 .940 23.88 1.090 27.69 1.090 27.69 1.040 26.42 1.040 26.42 1.432 36.37 1.432 36.37 D Max E .010 [.254] F 005 [.127] .270 6.86 .270 6.86 .270 6.86 .270 6.86 .270 6.86 .270 6.86 .270 6.86 .270 6.86 .270 6.86 .270 6.86 .270 6.86 .270 6.86 .310 7.87 .310 7.87 .360 9.15 .360 9.15 .298 7.57 .298 7.57 .298 7.57 .298 7.57 .298 7.57 .298 7.57 .298 7.57 .298 7.57 .298 7.57 .298 7.57 .298 7.57 .298 7.57 .341 8.66 .341 8.66 .384 9.75 .384 9.75 .565 14.35 .565 14.35 .715 18.16 .715 18.16 .865 21.97 .865 21.97 .965 24.51 .965 24.51 1.115 28.32 1.115 28.32 1.265 32.13 1.265 32.13 1.215 30.86 1.215 30.86 1.800 45.71 1.800 45.71 P = Pin, S = Socket 9 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Microminiature D Connectors MCK Series Metal Shell Connectors Panel Mounting -- Cutout Dimensions Panel Mounting Dimensions -- MCK .395 [10.03] .200 [5.08] Plug and Receptacle Rear Mounted .300 [7.62] Plug Front Mounted Receptacle Rear Mounted Plug and Receptacle Front Mounted Panel Cutout Dimensions -- MCK .095 [2.41] C Full Radius (Typ.) 9-51 B A R .015 Max. [.381] Typ. Figure 1 Front Mounting Number of Contacts 1 C .095 [2.41] Full Radius (Typ.) A 9-51 Fig. 9 2 1 B 15 2 + .005 R .101 - .000 4 Plcs. + .127 [2.56 - .000 ] 116 Typ. 1 Figure 2 Rear Mounting 21 1.810/1.805 [45.98/45.85] 25 2 1 .122 [3.10] 2 1 100 Full Radius (Typ.) 1.448 .002 [36.83/36.73] .369/.364 [9.37/9.24] R .015 Max. [.381] Typ. 31 2 1 37 2 Front Mounting 1 51 2 .122 [3.10] 1.810/1.805 [45.98/45.85] 100 Full Radius (Typ.) 1.514 .002 [38.51/38.40] A + .004 [.102] - .000 [.000] .404 10.26 .406 10.31 .554 14.07 .556 14.12 .704 17.88 .706 17.93 .804 20.42 .806 20.47 .954 24.23 .956 24.28 1.104 28.04 1.106 28.09 1.054 26.77 1.056 26.82 B + .004 [.102] - .000 [.000] .274 6.96 .257 6.53 .274 6.96 .257 6.53 .274 6.96 .257 6.53 .274 6.96 .257 6.53 .274 6.96 .257 6.53 .274 6.96 .257 6.53 .314 7.98 .300 7.62 C + .005 [.127] - .000 [.000] .570 14.48 .570 14.48 .720 18.29 .720 18.29 .870 22.10 .870 22.10 .970 24.64 .970 24.64 1.120 28.45 1.120 28.45 1.270 32.26 1.270 32.26 1.220 30.99 1.220 30.99 .403/.398 [10.24/10.11] R .055 Max. [1.40] Typ. Rear Mounting 10 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Microminiature D Connectors MCD Series Plastic Shell Connectors Microminiature D Connectors Screw Mount Dimensions Per MIL-DTL-83513 F Contact #1 Two Mtg. Holes O.092.004 [2.34.10] Pin E A .199.005 [5.05.13] B .395 /.360 [10.0 3/ 9.14] Crimp or Solder Pin 1 Pin .094.006 [2.390.15] D C Plug (Pin side) o w T F Contact 1 # Mtg. Holes O.092.004 [2.340.10] Socket E A .180.005 [4.570.13] B Receptacle (Socket side) .375 /.340 [9.52 /8.64] Crimp or Solder Socket Socket .094.006 [2.390.15] Liquid Crystal Polymer or Polyphenylene Sulfide -- MCDR3* per MIL-DTL-83513 D C Note: MCD Plastic Screw Mount Series is intermateable with MCDM Metal Series Connectors (Pages 25 and 26). Part Number A .010 [.254] B Max. MCD**- 9P*** .778 19.76 .778 19.76 .928 23.57 .928 23.57 1.078 27.38 1.078 27.38 1.178 29.92 1.178 29.92 1.328 33.73 1.328 33.73 1.478 37.54 1.478 37.54 1.428 36.27 1.428 36.27 .2918 7.412 .3798 9.647 .4418 11.222 .5298 13.457 .5918 15.032 .6798 17.267 .6918 17.572 .7798 19.807 .8418 21.382 .9298 23.617 .9918 25.192 1.0798 27.427 .9418 23.922 1.0298 26.157 MCD**- 9S*** MCD**- 15P*** MCD**- 15S*** MCD**- 21P*** MCD**- 21S*** MCD**- 25P*** MCD**- 25S*** MCD**- 31P*** MCD**- 31S*** MCD**- 37P*** MCD**- 37S*** MCD**- 51P*** MCD**- 51S*** C +.010 [.254] -.018 [.457] .398 10.11 .398 10.11 .548 13.92 .548 13.92 .698 17.73 .698 17.73 .798 20.27 .798 20.27 .948 24.08 .948 24.08 1.098 27.89 1.098 27.89 1.048 26.62 1.048 26.62 D Max E .010 [.254] F 005 [.127] .173 4.39 .173 4.39 .173 4.39 .173 4.39 .173 4.39 .173 4.39 .173 4.39 .173 4.39 .173 4.39 .173 4.39 .173 4.39 .173 4.39 .220 5.59 .220 5.59 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .250 6.35 .250 6.35 .565 14.35 .565 14.35 .715 18.16 .715 18.16 .865 21.97 .865 21.97 .965 24.51 .965 24.51 1.115 28.32 1.115 28.32 1.265 32.13 1.265 32.13 1.215 30.86 1.215 30.86 Avg. Weight lbs. 5% [grams] .0017 0.77 .0016 0.72 .0024 1.08 .0023 1.04 .0035 1.59 .0034 1.54 .0042 1.90 .0037 1.67 .0053 2.40 .0048 2.17 .0057 2.58 .0051 2.31 .0072 3.26 .0063 2.85 P = Pin, S = Socket Note: Weight given is with .500 [12.7] uninsulated, solid, 24 AWG gold plated copper pigtails. *See "How to Specify" for description, on page 7. 11 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Microminiature D Connectors MCD Series Plastic Shell Connectors (Continued) Clip Mount -- MCD .019 [.483] .093 .003 [2.44 /2.29] Contact #1 Pin E A .199 [5.05] B .395 /.360 [10.03 /9.14] Crimp or Solder Pin Pin .060 [1.52] Plug (Pin side) D C .093 .003 [2.44 /2.29] .019 [.483] Contact #1 Socket E A .180 [4.57] B .375 /.340 [9.52 /8.64] Receptacle (Socket side) Crimp or Solder Socket Socket .060 [1.52] Note: Clip Mount not covered by current issue of MIL-DTL-83513. D C Part Number A .005 [.127] B Max. C .010 [.254] D .010 [.254] E .005 [.127] MCD**- 9P*** .506 12.85 .506 12.85 .656 16.66 .656 16.66 .806 20.47 .806 20.47 .906 23.01 .906 23.01 1.056 26.82 1.056 26.82 1.206 30.63 1.206 30.63 1.156 29.36 1.156 29.36 .2918 74.12 .3798 96.47 .4418 112.22 .5298 134.57 .5918 150.32 .6798 172.67 .6918 175.72 .7798 198.07 .8418 213.82 .9298 236.17 .9918 251.92 1.0798 274.27 .9418 239.22 1.0298 261.57 .398 10.11 .398 10.11 .548 13.92 .548 13.92 .698 17.73 .698 17.73 .798 20.27 .798 20.27 .948 24.08 .948 24.08 1.098 27.89 1.098 27.89 1.048 26.62 1.048 26.62 .165 4.19 .165 4.19 .165 4.19 .165 4.19 .165 4.19 .165 4.19 .165 4.19 .165 4.19 .165 4.19 .165 4.19 .165 4.19 .165 4.19 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .250 6.35 .250 6.35 MCD**- 9S*** MCD**- 15P*** MCD**- 15S*** MCD**- 21P*** MCD**- 21S*** MCD**- 25P*** MCD**- 25S*** MCD**- 31P*** MCD**- 31S*** MCD**- 37P*** MCD**- 37S*** MCD**- 51P*** MCD**- 51S*** Avg. Weight lbs. 5% [grams] .0017 0.77 .0016 0.72 .0024 1.08 .0023 1.04 .0035 1.59 .0034 1.54 .0042 1.90 .0037 1.67 .0053 2.40 .0048 2.17 .0057 2.58 .0051 2.31 .0072 3.26 .0063 2.85 P = Pin, S = Socket Note: Weight given is with .500 [12.7] uninsulated, solid, 24 AWG gold plated copper pigtails. *See "How to Specify" for description, on page 7. 12 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Microminiature D Connectors MCD Series Plastic Shell Connectors Panel Mounting -- Cutout Dimensions Microminiature D Connectors Panel Mounting Dimensions -- MCD Screw Mount Clip Mount .200.005 [5.080.13] .200.005 [5.080.13] Plug and Receptacle Rear Mounted Plug and Receptacle Rear Mounted Plug and Receptacle Front Mounted Plug and Receptacle Front Mounted .300.005 [7.620.13] .265.005 [6.730.13] Plug Front Mounted Receptacle Rear Mounted Plug Front Mounted Receptacle Rear Mounted Panel Cutout Dimensions -- MCD Number of Contacts Screw Mounting Clip Mounting 9 A B .005 .089 +- .000 0.13 ] [2.26 +- 0.00 C B R .015 Max. [.381] Typ. 15 A Full Radius (Typ.) Front Front Figure 1 R .015 [.381] Max. Typ. 21 Figure 2 25 C A B .089 [2.26] A B R .015 Max. [.381] Typ. Full Radius (Typ.) 1 .395.005 [10.030.13] .330.005 [8.380.13] R .075 [1.90 + .005 - .000 + 0.13 - 0.00 ] Rear Rear Figure 3 Figure 4 31 116 Typ. 37 51 Notes: Front mounting preferred. Fig. 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 A + .004 [.102] - .000 [.000] .438 [11.13] .412 [10.46] .438 [11.13] .384 [9.75] .588 [14.93] .562 [14.27] .588 [14.93] .534 [13.56] .738 [18.75] .712 [18.08] .738 [18.75] .684 [17.37] .838 [21.29] .812 [20.62] .838 [21.29] .784 [19.91] .988 [25.10] .962 [24.43] .988 [25.10] .934 [23.72] 1.138 [28.91] 1.112 [28.24] 1.138 [28.91] 1.084 [27.53] 1.088 [27.64] 1.062 [26.97] 1.088 [27.64] 1.034 [26.26] B + .004 [.102] - .000 [.000] .177 [4.50] .177 [4.50] .222 [5.64] .222 [5.64] .177 [4.50] .177 [4.50] .222 [5.64] .222 [5.64] .177 [4.50] .177 [4.50] .222 [5.64] .222 [5.64] .177 [4.50] .177 [4.50] .222 [5.64] .222 [5.64] .177 [4.50] .177 [4.50] .222 [5.64] .222 [5.64] .177 [4.50] .177 [4.50] .222 [5.64] .222 [5.64] .224 [5.69] .224 [5.69] .264 [6.71] .264 [6.71] C + .005 [.127] - .000 [.000] -- .570 [14.48] -- .570 [14.48] -- .720 [18.29] -- .720 [18.29] -- .870 [22.10] -- .870 [22.10] -- .970 [24.64] -- .970 [24.64] -- 1.120 [28.45] -- 1.120 [28.45] -- 1.270 [32.26] -- 1.270 [32.26] -- 1.220 [30.99] -- 1.220 [30.99] 13 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Microminiature D Connectors Mounting and Coupling Hardware For Screw Mount MCK, MCD and MCDM 9-51 Contacts Slot Head (K) (KM) (L) (LM) (P) O .156 Max. [3.96] Over Knurl Jackscrew Retaining Ring .600 [15.24] O .125 [3.18] Jackscrew .853 .015 [21.67 0.38] Part Number 5-1532137-8 Jackscrew Assembly High Profile (K) 096-0002-0010 M83513/5-06 (KM) S96-0002-0084 (Q) (QM) Jackscrew .600 [15.24] O .125 [3.18] .340-.360 [8.64-9.14] Part Number 5-1532137-5 Jackscrew Assembly Low Profile (R) 096-0002-0015 M83513/5-02 (RM) S96-0002-0087 (J) (JM) .585 [14.86] O .187 [4.75] .100 [2.54] Jackscrew .920 Max. [23.37] Retaining Ring .415 Max. [10.54] .112-40UNC-2A [2.84] .112-40UNC-2A [2.84] Part Number 6-1532137-3 Jackscrew Assembly High Profile (H) 096-0002-0061 M83513/5-16 (HM) S96-0002-0088 (T) (TM) Part Number 6-1532137-2 Jackscrew Assembly Low Profile (J) 096-0002-0062 M83513/5-15 (JM) S96-0002-0089 (N) (NM) O .200 Max. [3.96] Over Knurl Jackscrew Retaining Ring Part Number 5-1532137-9 Jackpost Assembly (P) S96-0002-0009 M83513/5-07 P mates with K,KM, L,LM, Q,QM and R,RM Jackscrew Assemblies. .098 [2.29] Retaining Ring O .200 Max. [3.96] Over Knurl 100 Contacts 1/16" Allen Head .086-56UNC-2A [2.18] .086-56UNC-2A [2.18] (H) (HM) Jackscrew .475 [12.07] Jackscrew .853 .015 [21.67 0.38] Part Number 5-1532137-6 Jackscrew Assembly High Profile (Q) 096-0002-0014 M83513/5-03 (QM) S96-0002-0086 Retaining Ring Lockwasher .187 [4.75] (R) (RM) .086-56UNC-2A [2.18] 100 Contacts Slot Head .086-56UNC-2B [2.18] Bushing Hex Nut Part Number 5-1532137-7 Jackscrew Assembly Low Profile (L) 096-0002-0011 M83513/5-05 (LM) S96-0002-0085 O .156 Max. [3.96] Over Knurl Retaining Ring .125 Hex. [3.18] .340-.360 [8.64-9.14] Retaining Ring .086-56UNC-2A [2.18] .086-56UNC-2A [2.18] 9-51 Contacts 1/16" Allen Head .098 [2.29] .585 [14.86] (S) O .187 [4.75] .100 [2.54] Jackscrew .920 Max. [23.37] Retaining Ring .415 Max. [10.54] .112-40UNC-2A [2.84] .112-40UNC-2A [2.84] Part Number 6-1532137-1 Jackscrew Assembly High Profile (T) 096-0002-0064 M83513/5-13 (TM) S96-0002-0090 Notes: 1. Jackpost Assemblies will accommodate .094 [2.39] max. thickness panel. 2. Letter(s) in parentheses is to assist in ordering hardware with the connector (See "How To Specify" page 7). 3. Single letters (e.g. K) designate hardware kits (2 pcs. per kit) that meets M83513/05 requirements except the material is 303 stainless steel, passivated. 4. Add M suffix (e.g. KM) to designate hardware that meets all M83513/05 requirements. Material is corrosion resistant steel, non-magnetic, 125,000 PSI tensile strength minimum (Applies to jackscrews only). 5. Non-MIL hardware ordered separately should be ordered in pairs; i.e. 2 pcs. P/N 096-0002-0009 per connector half. 6. Items in bold italic are qualified to MIL-DTL-83513. Part Number 6-1532137-0 Jackscrew Assembly Low Profile (N) 096-0002-0065 M83513/5-12 (NM) S96-0002-0091 .187 Hex. [4.75] .112-40UNC-2B [2.84] Bushing Lockwasher Hex Nut .185 Max. [4.70] .475 [12.07] .112-40UNC-2A [2.84] Part Number 6-1532137-4 Jackpost Assembly (S) S96-0002-0060 M83513/5-17 S mates with H,HM, J,JM, T,TM and N,NM Jackscrew Assemblies. 14 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Microminiature D Connectors Mounting and Coupling Hardware (Continued) Slot Head 1/16" Allen Head (X) (Y) O .125 [3.18] Lockscrew .075 [1.91] Lockscrew Retaining Clip Retaining Clip .086 -56UNC-2A [2.18] .086 -56UNC-2A [2.18] Part Number 4-1532137-3 Lockscrew Assembly 096-0002-0008 For Clip Mount -- MCD O .125 [3.18] .075 [1.91] Microminiature D Connectors For Screw Mount MCK, MCD and MCDM (Continued) .343 .010 [8.71 0.25] 1 Part Number 1495164-1 Lockscrew Assembly 096-0002-0013 (Z) .600 [15.24] .356 [9.04] Part Number 1466018-1 Mounting Key and Clip P/N 096-0001-0000 (2 Required) For Float Mount -- MCK, MCD and MCDM (F) Washer Bushing Float Mount Bushing (Factory Installed) Notes: 1. Jackpost Assemblies will accommodate .094 [2.39] max. thickness panel. 2. Letter(s) in parentheses is to assist in ordering hardware with the connector (See "How To Specify" page 7). 3. Hardware ordered separately should be ordered in pairs; i.e. 2 pcs. P/N 096-0002-0013 per connector half. 15 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Microminiature D Connectors MCK Transition Blocks RT1 -- Right-Angle Termination Configuration A Optional Jackpost (2 Plcs.) For 9 Thru 51: .086-56 UNC-2B For 100: .112-40 UNC-2B B C D MIL-DTL-83513/10 through /21 configurations. 90 -- Lo Profile termination configurations. See pages 31-35 for M83513 cross references. Mounting Surface Contact #1 (Pin Connectors) Contact #1 (Socket Connectors) .109 .015 [2.77 0.39] .190 Max. .185 Max. [4.83] (Sizes 9-51) [4.70] (Size 100 only) F F E G Mounting Surface .096.003 Dia. [2.440.08] Typ. MCK C2 P 37 P .096.003 Dia. [2.440 .08] Typ. Mounting Surface 9, 15, 21 & 25 Contacts How To Specify G E H 31, 37, 51 & 100 Contacts .125.003 Dia. [3.180 .08] Typ. (Size 100 Only) RT1 Right Angle Termination (Solder Dipped) RT1 -- w/ .109 Leads RT1A -- w/ .140 Leads RT1B -- w/ .172 Leads Contact Type S = STD Socket P = STD Pin Layout 9, 15, 21, 25, 31, 37, 51 and 100 Hardware P = Jackpost (9-51) B = No Hardware S = (100) Shell Finish C2 = Cadmium, Yellow Chromate N1 = Nickel, Electroless Connector Series (See page 9) Notes: 1. For terminal identification see page 18. 2. Grid pattern for all configurations is .100 x .100 [2.54 x 2.54]. 3. Lead lengths shown are for RT1. 4. Items in bold italic are qualified to MIL-DTL-83513. 16 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Microminiature D Connectors MCK Transition Blocks (Continued) Microminiature D Connectors RT1 -- Right-Angle Termination Configuration (Continued) Part Number MCK-**- *- 9PRT1 MCK-**- *- 9SRT1 MCK-**- *- 15PRT1 MCK-**- *- 15SRT1 MCK-**- *- 21PRT1 MCK-**- *- 21SRT1 MCK-**- *- 25PRT1 MCK-**- *- 25SRT1 MCK-**- *- 31PRT1 MCK-**- *- 31SRT1 MCK-**- *- 37PRT1 MCK-**- *- 37SRT1 MCK-**- *- 51PRT1 MCK-**- *- 51SRT1 MCK-**- *- 100PRT1 MCK-**- *- 100SRT1 A Max. .787 19.99 .787 19.99 .937 23.80 .937 23.80 1.087 27.61 1.087 27.61 1.187 30.15 1.187 30.15 1.337 33.96 1.337 33.96 1.487 37.77 1.487 37.77 1.435 36.45 1.435 36.45 2.175 55.25 2.175 55.25 B 005 [.127] .565 14.35 .565 14.35 .715 18.16 .715 18.16 .865 21.97 .865 21.97 .965 24.51 .965 24.51 1.115 28.32 1.115 28.32 1.265 32.13 1.265 32.13 1.215 30.86 1.215 30.86 1.800 45.72 1.800 45.72 C Max. .3338 8.48 .4018 10.21 .4838 12.29 .5518 14.02 .6338 16.10 .7018 17.83 .7338 18.64 .8018 20.37 .8838 22.45 .9518 24.18 1.0338 26.26 1.1018 27.99 .9838 24.99 1.0518 26.72 1.3838 35.15 1.508 38.30 D Max. .308 7.83 .308 7.83 .308 7.83 .308 7.83 .308 7.83 .308 7.83 .308 7.83 .308 7.83 .308 7.83 .308 7.83 .308 7.83 .308 7.83 .351 8.92 .351 8.92 .394 10.01 .394 10.01 E Max. .425 10.80 .425 10.80 .425 10.80 .425 10.80 .425 10.80 .425 10.80 .425 10.80 .425 10.80 .525 13.34 .525 13.34 .525 13.34 .525 13.34 .660 16.76 .660 16.76 1.010 25.65 1.010 25.65 F +.010 [.254] .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .300 7.62 .300 7.62 .400 10.16 .400 10.16 G +.010 [.254] .230 5.84 .230 5.84 .130 3.30 .130 3.30 .130 3.30 .130 3.30 .130 3.30 .130 3.30 .130 3.30 .130 3.30 .130 3.30 .130 3.30 .150 3.81 .150 3.81 .200 5.08 .200 5.08 H Max. -- -- 1 -- -- -- -- -- -- 1.090 27.69 1.090 27.69 1.190 30.23 1.190 30.23 1.230 31.24 1.230 31.24 1.825 46.36 1.825 46.36 P = Pin, S = Socket Note: Items in bold italic are qualified to MIL-DTL-83513. 17 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Microminiature D Connectors MCK Transition Blocks (Continued) RT1 -- Right-Angle Termination Configuration (Continued) View is from mounting surface of connector. Plug configuration shown. For receptacle, use mirror image. (Except 100 contacts) .100 Typ. [2.54] CL 4 5 9 .050 Typ. [1.27] 2 8 3 .100 Typ. [2.54] CL 1 7 8 15 6 14 9 Contacts .100 Typ. [2.54] 11 10 24 25 8 22 23 6 9 4 7 21 20 3 5 11 1 10 .020 [0.51] 9 16 21 .100 Typ. [2.54] .050 Typ. [1.27] 11 16 14 12 .020 [0.51] CL 18 16 14 12 37 35 33 7 5 10 8 31 29 28 32 30 3 6 26 27 28 3 4 24 17 18 16 2 22 15 25 2 21 1 3 8 5 7 27 29 9 31 28 30 52 54 56 32 76 78 80 79 82 81 62 64 66 63 86 83 85 87 .025 Ref. [0.64] 17 19 65 42 44 68 67 35 33 20 .183 [4.65] 88 90 70 92 72 71 73 94 89 91 93 95 96 97 .100 Typ. [2.54] 26 23 47 46 48 69 25 49 14 31 51 50 11 12 29 30 49 20 .020 [0.51] 17 18 27 8 10 9 46 28 48 6 4 7 5 3 43 41 25 23 45 42 47 26 .050 [1.27] 2 24 1 21 19 22 20 44 40 39 38 37 36 .108 [2.74] 1.800 Ref. [45.72] 25 23 22 49 50 75 74 75 73 99 99 16 14 43 46 44 71 69 96 97 15 20 18 72 70 100 98 17 47 45 48 74 98 100 21 19 24 51 50 .050 Typ. [1.27] Ref. 42 40 67 68 94 95 41 12 39 38 Socket #1 Ref. 9 10 8 6 3 4 2 36 32 30 28 62 34 59 57 60 58 88 86 84 85 82 83 55 .100 Ref. [2.54] 1 29 63 61 91 89 87 5 33 31 65 90 7 37 35 66 64 92 93 13 11 .025 Ref. [0.64] (Receptacle Connector) .275 Ref. [6.99] .100 Typ. [2.54] Ref. 26 51 .100 Ref. [2.54] 100 Contacts (Socket Connector) 1 9 CL 24 21 45 .083 [2.11] 2 3 21 22 .275 Ref. [6.99] 20 22 39 41 43 40 61 84 15 18 36 38 60 59 23 .050 Typ. [1.27] Ref. 14 16 35 37 34 58 55 57 12 11 13 33 53 77 10 12 51 Contacts .100 Typ. [2.54] Ref. 6 4 5 1.216 Ref. [30.89] 1.800 Ref. [45.72] 4 6 26 13 37 Contacts 2 8 24 7 25 1 16 15 13 .100 Typ. [2.54] CL .050 Typ. [1.27] 1 1.266 Ref. [32.16] CL 9 10 30 29 27 34 32 36 34 18 31 Contacts .020 [0.51] 9 19 2 14 1.116 Ref. [28.35] .100 Typ. [2.54] 11 20 3 .158 [4.01] CL 25 Contacts 19 17 15 13 5 17 4 21 Contacts .966 Ref. [24.54] .050 Typ. [1.27] 6 7 15 Contacts 1 14 8 9 .866 Ref. [22.00] 15 13 15 18 11 10 2 3 2 17 19 13 .050 Typ. [1.27] .083 [2.11] CL 12 4 12 .050 Typ. [1.27] .020 [0.51] CL .716 Ref. [18.19] .566 Ref. [14.38] 13 5 7 .020 [0.51] 6 .083 [2.11] .100 Typ. [2.54] .050 Typ. [1.27] .108 [2.74] 27 53 56 54 52 80 78 81 79 76 77 .100 Ref. [2.54] 100 Contacts (Pin Connector) Pin #1 Ref. (Plug Connector) 18 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Microminiature D Connectors MCK Transition Blocks (Continued) Microminiature D Connectors ST1 -- Straight Termination Configuration Contact #1 (Pin Connector) Contact #1 (Socket Connector) A B .096.003 Dia. Typ. [2.44.076] (For Size 9 Thru 51) .125.003 Dia. Typ. [3.18.076] (For Size 100 Only) F MIL-DTL-83513/22 through /27 configurations. 180 -- Lo Profile termination configurations. See page 35 for M83513 cross references. 1 Optional Jackpost (2 Plcs.) For 9 Thru 51: .086-56 UNC-2B For 100: .112-40 UNC-2B C .190 Max. (Sizes 9-51) [4.83] D .185 Max. (Size100 only) [4.70] .355 Max. [9.02] (Sizes 9-51) E .550 Max. [13.97] (Size100 only) .165 Max. (Sizes 9-51) .303 Max. (Size 100 only) [4.20] [7.70] .109 .015 [2.77 0.39] (Lead Length For ST1 Shown) .100 Typ. [2.54] .050 Typ. [1.27] Lead #1 (Socket Connector) Lead #1 (Pin Connector) How To Specify MCK C2 P 37 P ST1 Straight Termination (Solder Dipped) ST1 -- w/ .109 Leads ST1A -- w/ .140 Leads ST1B -- w/ .172 Leads Contact Type S = STD Socket P = STD Pin Layout 9, 15, 21, 25, 31, 37, 51 and 100 Hardware P = Jackpost (9-51) B = No Hardware S = (100) Shell Finish C2 = Cadmium, Yellow Chromate N1 = Nickel, Electroless Connector Series (See page 9) Notes: 1. For terminal identification see page 5048. 2. Grid pattern for all configurations is .100 x .100 [2.54 x 2.54]. 3. Lead lengths shown are for ST1. 4. Items in bold italic are qualified to MIL-DTL-83513. 19 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Microminiature D Connectors MCK Transition Blocks (Continued) ST1 -- Straight Termination Configuration (Continued) Part Number MCK-**- *- 9PST1 MCK-**- *- 9SST1 MCK-**- *- 15PST1 MCK-**- *- 15SST1 MCK-**- *- 21PST1 MCK-**- *- 21SST1 MCK-**- *- 25PST1 MCK-**- *- 25SST1 MCK-**- *- 31PST1 MCK-**- *- 31SST1 MCK-**- *- 37PST1 MCK-**- *- 37SST1 MCK-**- *- 51PST1 MCK-**- *- 51SST1 MCK-**- *- 100PST1 MCK-**- *- 100SST1 A Max. 1.390 35.31 1.390 35.31 1.390 35.31 1.390 35.31 1.690 42.93 1.690 42.93 1.740 44.20 1.740 44.20 2.040 51.82 2.040 51.82 2.340 59.44 2.340 59.44 2.270 57.66 2.280 57.91 3.250 82.55 3.250 82.55 B .007 [.178] 1.150 29.21 1.150 29.21 1.150 29.21 1.150 29.21 1.450 36.83 1.450 36.83 1.500 38.10 1.500 38.10 1.800 45.72 1.800 45.72 2.100 53.34 2.100 53.34 2.000 50.80 2.000 50.80 2.800 71.12 2.800 71.12 C .005 [.127] .565 14.35 .565 14.35 .715 18.16 .715 18.16 .865 21.97 .865 21.97 .965 24.51 .965 24.51 1.115 28.32 1.115 28.32 1.265 32.13 1.265 32.13 1.215 30.86 1.215 30.86 1.800 45.72 1.800 45.72 D Max. .885 22.48 .885 22.48 .945 24.00 .945 24.00 1.185 30.10 1.185 30.10 1.275 32.39 1.275 32.39 1.575 40.01 1.575 40.01 1.875 47.63 1.875 47.63 1.775 45.09 1.775 45.09 2.585 65.66 2.585 65.66 E Max. .3338 8.48 .4018 10.21 .4838 12.29 .5518 14.02 .6338 16.10 .7018 17.83 .7338 18.64 .8018 20.37 .8838 22.45 .9518 24.18 1.0338 26.26 1.1018 27.99 .9838 24.99 1.0518 26.72 1.3838 35.15 1.508 38.30 F Max. .308 7.83 .308 7.83 .308 7.83 .308 7.83 .308 7.83 .308 7.83 .308 7.83 .308 7.83 .308 7.83 .308 7.83 .308 7.83 .308 7.83 .351 8.92 .351 8.92 .460 11.68 .460 11.68 P = Pin, S = Socket Note: Items in bold italic are qualified to MIL-DTL-83513. 20 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Microminiature D Connectors MCK Transition Blocks (Continued) Microminiature D Connectors ST1 -- Straight Termination Configuration (Continued) View is from mounting surface of connector. Plug configuration shown. For receptacle, use mirror image. .100 Typ. [2.54] .050 [1.27] CL 6 9 1 .050 [1.27] .050 Typ. [1.27] CL 17 5 31 1 .375 [9.53] .150 [3.81] 9 Contacts .050 [1.27] CL 9 15 1 .100 Typ. [2.54] .050 Typ. [1.27] 16 31 Contacts .050 [1.27] CL 20 37 1 8 1 .100 Typ. [2.54] .050 Typ. [1.27] .100 Typ. [2.54] .050 Typ. [1.27] 19 .150 [3.81] .225 [5.72] 37 Contacts 15 Contacts .050 [1.27] .100 Typ. [2.54] .050 Typ. [1.27] CL 12 21 1 .100 [2.54] CL 36 51 19 .100 Typ. [2.54] .050 Typ. [1.27] 35 1 18 11 .225 [5.72] .150 [3.81] 21 Contacts 51 Contacts .100 Typ. [2.54] .050 [1.27] 14 25 1 .050 [1.27] .050 [1.27] Typ. CL 76 52 .100 Typ. [2.54] .050 Typ. [1.27] 100 75 27 13 .150 [3.81] CL 51 1 26 .150 [3.81] 100 Contacts 25 Contacts Socket #1 Ref. Pin #1 Ref. (Receptacle Connector) (Plug Connector) 21 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Microminiature D Connectors MCK ST2 Series Straight Mount PCB Connectors MCK with Cactus Bend Termination .308 Max. [7.83] A Pin 2-56 UNC-2B Thd. Opt. Jackpost 2 Plcs. Contact #1 C B .190 Max. [4.83] n n n n n Meets MIL-DTL-83513 Performance requirements Single metal shell with no Transition Block Low profile and light weight .100 [2.54] x .075 [1.91] grid pattern .182 .004 [4.62 0.10] .400 Max. [10.16] .109 Min. [2.76] Pin .160 Min. [4.06] 2-56 Thd. Studs. Opt. .210 .02 [5.33 0.5] #25 AWG, Copper, Hard, Gold Plated, Solder Dipped .225 Ref. [5.72] Design allows lower cost construction .075 Typ. [1.91] .100 Typ. [2.54] Metal Mounting Surface .050 Typ. [1.27] .308 Max. [7.83] .075 Typ. [1.91] .038 Typ. [0.97] .025 Typ. [0.64] A Socket 2-56 UNC-2B Thd. Opt. Jackpost 2 Plcs. Contact #1 C B .190 Max. [4.83] .195 .003 [4.95 0.08] .400 Max. [10.16] .109 Min. [2.76] Socket .160 Min. [4.06] 2-56 Thd. Studs. Opt. .210 .02 [5.33 0.5] #25 AWG, Copper, Hard, Gold Plated, Solder Dipped .225 Ref. [5.72] .075 Typ. [1.91] .100 Typ. [2.54] Metal Mounting Surface .050 Typ. [1.27] .075 Typ. [1.91] .038 Typ. [0.97] .025 Typ. [0.64] 22 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Microminiature D Connectors MCK ST2 Series Straight Mount PCB Connectors (Continued) MCK-**-*- 9 PST2 MCK-**-*- 9 SST2 MCK-**-*- 15 PST2 MCK-**-*- 15 SST2 MCK-**-*- 21 PST2 MCK-**-*- 21 SST2 MCK-**-*- 25 PST2 MCK-**-*- 25 SST2 MCK-**-*- 31 PST2 MCK-**-*- 31 SST2 MCK-**-*- 37 PST2 MCK-**-*- 37 SST2 How To Specify MCK C2 P 37 P B .005 .565 14.35 .565 14.35 .715 18.16 .715 18.16 .865 21.97 .865 21.97 .965 24.51 .965 24.51 1.115 28.32 1.115 28.32 1.265 32.13 1.265 32.13 Microminiature D Connectors A Max. .785 19.94 .785 19.94 .935 23.75 .935 23.75 1.085 27.56 1.085 27.56 1.185 30.10 1.185 30.10 1.335 33.91 1.335 33.91 1.485 37.72 1.485 37.72 Part Number C Max. .333 8.46 .402 10.21 .483 12.27 .552 14.02 .633 16.08 .702 17.83 .733 18.62 .802 20.37 .883 22.43 .952 24.18 1.033 26.24 1.102 27.99 1 ST2 Straight Termination Contact Type S = Standard Socket P = Standard Pin Layout 9, 15, 21, 25, 31, 37 Hardware P = Jackpost (2-56 THD) B = No Hardware Shell Finish C2 = Cadmium, Yellow Chromate N1 = Nickel, Electroless Connector Series (See Page 9) 23 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Microminiature D Connectors MCK ST2 Series Straight Mount PCB Connectors (Continued) View is of mounting surface of pin connector View is of mounting surface of socket connector CL CL 6 9 8 Size 9 7 1 3 .183 [4.65] 8 5 5 2 7 Size 9 9 4 Size 15 9 .183 [4.65] 2 CL 12 1 .183 [4.65] 14 14 11 13 15 4 6 8 2 3 5 Size 15 15 12 13 7 7 .183 [4.65] Size 21 14 13 1 3 2 .183 [4.65] 18 17 5 4 Size 25 16 21 20 19 7 6 Size 21 21 9 8 19 20 11 11 10 22 17 19 21 3 5 7 9 2 4 18 9 10 .183 [4.65] 17 18 17 20 19 6 2 22 21 25 24 23 Size 25 25 11 8 8 4 1 6 3 10 26 25 8 5 7 13 14 5 6 12 3 1 4 2 23 24 13 13 12 21 12 17 15 20 18 16 9 7 5 3 11 .183 [4.65] 19 22 10 8 6 14 1 4 2 CL 24 23 15 16 7 CL Size 31 2 CL 20 15 1 .183 [4.65] 18 1 4 CL 14 9 3 6 CL 16 15 10 11 5 8 CL 12 1 4 CL 10 6 3 28 27 10 9 30 29 12 11 30 Size 31 31 14 13 31 29 15 16 16 15 28 26 27 13 14 24 25 11 12 22 23 9 20 21 7 10 18 19 5 8 17 3 6 1 4 2 .183 [4.65] .183 [4.65] CL CL 20 Size 37 22 24 26 28 21 23 25 27 3 5 7 9 1 2 4 6 8 30 29 11 10 32 31 34 33 13 12 35 15 14 37 36 16 Size 37 37 17 36 19 19 35 34 17 18 18 33 31 32 15 16 29 30 13 14 27 26 9 7 11 12 25 28 10 8 23 24 21 22 5 6 20 3 4 1 2 .183 [4.65] .183 [4.65] Pin #1 Ref. Socket #1 Ref. (Plug Connector) (Receptacle Connector) 24 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Microminiature D Connectors MCDM Series Metal Shell Connectors Performance Contact Resistance -- The average mated contact resistance is 4 milliohms, with a maximum value of 8 milliohms, using standard #24 solid copper leads when measured directly behind the crimp joints of the mated pin and socket contacts. The average resistance value at 100 microvolts is 4.8 milliohms. Dielectric Withstanding Voltage (60 Hz rms room temperature) -- Solder Pots: 600 VAC at sea level; 150 VAC at 70,000 feet [21,336 m]. Wire Terminations: 750 VAC at sea level; 200 VAC at 70,000 feet [21,336m] Vibration (Per MIL-STD-202C, Method 204-A, Condition D) -- No discontinuity in excess of 1 microsecond during twelve 20 minute sweeps from 10 to 2,000 CPS at .06 double amplitude or 20 G forces, whichever is less. Corrosion Resistance (Per MIL-STD-202C, Method 101B, Condition B) -- Both mated and unmated samples do not exceed the maximum allowable contact resistance (8 milliohms) when subjected to the 48 hour salt spray test. Durability -- The contact resistance after 500 mating cycles is less than the maximum allowable, 8 milliohms. Insulation Resistance -- Greater than 5,000 megohms at room temperature for the materials listed under "Materials". Maximum Current Carrying Capacity -- No. 24 contact, 3 amperes. It must be recognized, however, that all the wires to a connector will not carry their maximum current under all environmental conditions due to wire temperature. Contact Engaging and Separation Forces -- 6 oz. [1.67N] maximum (eng.); 0.5 oz. [.14N] minimum (sep.). Temperature Range (Operating) -- Diallyl phthalate -67F to 257F [-55C to +125C]. Microminiature D Connectors Technical & Performance Data Materials Insulator -- Diallyl phthalate per MIL-M-14, Type SDG-F or Liquid Crystal Polymer (LCP) per ASTM D5138. Contacts -- Pin Contact: Copper alloy and beryllium copper alloy make up the complete construction. Socket Contact: Copper alloy. Body Shell -- High grade aluminum alloy. 1 Finishes Contacts -- Standard finish is 0.000050 [0.00127] gold over copper flash per MIL-G-45204, Type II. Body Shell -- Electroless nickel per AMS 2404. Note: Insulators are molded into their metal shells -- No bonded joint is used. Screw Mount A F Contact #1 E .193 [4.90] .089-.094 Dia. [2.26-2.39] 2 Plcs. Pin B .093 [2.36] The only metal shell connector that mates with all existing plastic types. This line is ideal for external use and other applications requiring frequent disconnect and remating. When durability and reliability are paramount the metal shell connector is unsurpassed -- it eliminates the need for retrofitting where new metal shell varieties must mate with older plastic types. Originally designed for military applications, they are currently used for commercial requirements, including computers. .379 [9.63] Pin Pin D C A F Contact #1 E .180 [4.57] .089-.094 Dia. [2.26-2.39] Socket B .093 [2.36] .365 [9.27] Socket Socket .798 [20.27] D 25 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Microminiature D Connectors MCDM Series Metal Shell Connectors (Continued) Screw Mount (Continued) How To Specify S -- Solder pot for #26 max. stranded wire X -- Special, does not fit description below. MCD- M1 B 37 P 6 A 1 18.0 Lead Length in Inches (min.) Connector Series Shell Type and Material Insulation Color or Finish M1 -- Metal Shell Screw Mount Diallyl Phthalate or LCP Insulator 1 -- All white wire 2 -- All yellow wire 3 -- All gray wire Hardware (See Pages 14 and 15) 4 -- Gold plated 5 -- Tin dipped gold plated 6 -- Bare (unfinished) 7 -- Color coded per MIL-STD-681, System 1 8 -- Special color code 9 -- 10 color repeating (solid) per M83513 Wire Type B -- No Hardware F -- Float Bushing K -- Jackscrew, Slotted Head, High Profile L -- Jackscrew, Slotted Head, Low Profile Q -- Jackscrew, Allen Head, High Profile R -- Jackscrew, Allen Head, Low Profile X -- Lockscrew, Slotted Head Y -- Lockscrew, Allen Head P -- Jackpost *A -- Type E, 7 strand *B -- Type ET, 7 strand *C -- Type E, 19 strand *D -- Type ET, 19 strand F -- 7 strand per MIL 22759/11 (#28 AWG only) G -- 19 strand per MIL-22759/11 #26 AWG, #24 AWG L -- Copper, solid Q -- Stranded per MIL-W-22759/33 *Per MIL-W-16878 Wire Size 4 -- #24 5 -- #25 6 -- #26 8 -- #28 0 -- #30 Contact Type P -- Pin S -- Socket Layout 9, 15, 21, 25, 30, 31, 37, 51 Part Number MCDM1-9P*** MCDM1-9S*** MCDM1-15P*** MCDM1-15S*** MCDM1-21P*** MCDM1-21S*** MCDM1-25P*** MCDM1-25S*** MCDM1-30P*** MCDM1-30S*** MCDM1-31P*** MCDM1-31S*** MCDM1-37P*** MCDM1-37S*** MCDM1-51P*** MCDM1-51S*** A .005 [.127] .780 19.81 .780 19.81 .930 23.62 .930 23.62 1.080 27.43 1.080 27.43 1.180 29.97 1.180 29.97 .930 23.62 .930 23.62 1.330 33.78 1.330 33.78 1.480 37.59 1.480 37.59 1.430 36.32 1.430 36.32 B .005 [.127] .290 7.36 .365 9.27 .440 11.18 .515 13.08 .590 14.99 .665 16.89 .690 17.53 .765 19.43 .435 11.05 .515 13.08 .840 21.34 .915 23.24 .990 25.15 1.065 27.05 .940 23.88 1.015 25.78 C .010 [.254] .398 10.11 .398 10.11 .548 13.92 .548 13.92 .698 17.73 .698 17.73 .798 20.27 .798 20.27 .548 13.92 .548 13.92 .948 16.46 .948 16.46 1.098 27.89 1.098 27.89 1.048 26.62 1.048 26.62 D .010 [.254] .165 4.19 .165 4.19 .165 4.19 .165 4.19 .165 4.19 .165 4.19 .165 4.19 .165 4.19 .252 6.40 .252 6.40 .165 4.19 .165 4.19 .165 4.19 .165 4.19 .208 5.28 .208 5.28 E .005 [.127] .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .295 7.49 .295 7.49 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .250 6.35 .250 6.35 F .005 [.127] .565 14.35 .565 14.35 .715 18.16 .715 18.16 .865 21.97 .865 21.97 .965 24.51 .965 24.51 .715 18.16 .715 18.16 1.115 28.32 1.115 28.32 1.270 32.26 1.270 32.26 1.215 30.86 1.215 30.86 Avg. Weight lbs. 5% [grams] .003 1.36 .003 1.36 .004 1.81 .004 1.81 .005 2.26 .005 2.26 .006 2.72 .005 2.26 .007 3.17 .007 3.17 .007 3.17 .006 2.72 .007 3.17 .007 3.17 .009 4.08 .008 3.62 Note: Weight given is with .500 [12.7] uninsulated, solid, 24 AWG gold plated copper pigtails. 26 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Microminiature D Connectors MCDM Series Metal Shell RF COMBOMATE Connectors Microminiature D Connectors Screw Mount Coaxial Terminations A F Available now -- RF Performance in standard subminiature rectangular connectors, with VSWR values of 1.01 to 1.10 in frequencies ranging in DC to 2.3 GHz. This is the COMBOMATE Connector. Contact #1 Pin E .193 [4.90] B 1 .093 [2.36] This series of connectors incorporates the same metal shells and twist pin contacts used in the widely accepted, high reliability, MCDM Series. The RF COMBOMATE Connector Series will accommodate RG 196 A/U or RG 178 B/U coaxial cable terminated in a unique manner in standard, already tooled insert layouts. This feature results in savings in cost, time and space. The RF COMBOMATE Connector Series will accommodate a maximum of 17 RG 196 A/U or RG 178 B/U cables in an area of less than .225 sq. inches [14.51 mm2]. Mixed layouts with coaxial terminations and standard AWG 24, 26 and 28 are also immediately available in 7 different shell sizes. The overall envelope and mounting dimensions of equivalent size of COMBOMATE Connectors are exactly the same as the standard MCDM Series. .089-.094 Dia. [2.26-2.39] 2 Plcs. .379 [9.63] Pin .250 Max. [6.35] C Pin Epoxy D A F Contact #1 E .089-.094 Dia. [2.26-2.39] Socket .180 [4.57] B .093 [2.36] .365 [9.27] Socket Socket Epoxy .250 Max. [6.35] Performance Data -- Coaxial Terminations Impedance -- 49.0 to 51.0 Ohms. Voltage Standing Wave Ratio (VSWR) -- 1.01:1 to 1.10:1 at frequency ranging in DC to 2.3 GHz. Dielectric Withstanding Voltage (60 Hz rms room temperature) -- 750 VAC at sea level; 200 VAC at 70,000 feet [21,336 m]. D (Actual Test Data) 1 to 2 30 MHz 60.0 db 100 MHz 49.1 db 175 MHz 42.6 db 38.0 db 500 MHz 31.6 db 1000 MHz 2000 MHz 22.4 db 3000 MHz 21.5 db Crosstalk (Between Adjacent Lines) 2 to 3 3 to 4 59.8 db 60.7 db 48.3 db 51.7 db 41.4 db 47.2 db 38.8 db 39.5 db 32.0 db 30.0 db 22.5 db 22.3 db 23.9 db 21.4 db 4 to 5 60.0 db 50.6 db 47.0 db 40.0 db 32.5 db 20.8 db 24.2 db Sample 30 MHz 100 MHz 175 MHz 500 MHz 1000 MHz 2000 MHz 3000 MHz Insertion Loss #2 #3 .08 db .08 db .24 db .25 db .36 db .36 db .60 db .50 db 1.33 db 1.36 db 1.71 db 1.42 db 2.45 db 2.74 db #5 .08 db .25 db .32 db .48 db 1.24 db 1.45 db 2.84 db #1 .08 db .24 db .35 db .58 db 1.25 db 1.48 db 2.66 db #4 .08 db .25 db .34 db .58 db 1.35 db 1.40 db 2.86 db Note: Verification of all test data is on file at Tyco Electronics and is available upon request. All test runs using RG 196 A/U. 27 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Microminiature D Connectors MCDM Series Metal Shell RF COMBOMATE Connectors (Continued) Screw Mount Coaxial Terminations (Continued) How To Specify MCD M3 7 P 3 18.0 Lead Length in Inches (min.) Wire Size 3 -- RG 196 A/U (White insulation) 2 -- RG 178 B/U (Brown insulation) X -- Special, does not fit description* Contact Type P -- Pin S -- Socket Layout 3, 5, 7, 8, 10, 12, 17 Maximum RF combinations using RG 196 A/U and RG 178 B/U cable Shell Type and Material M3 -- Metal Shell Screw Mount Diallyl Phthalate or LCP Insulator Connector Series *Ordering Criteria: A wide variety of contact combinations, coaxial and power mixed, are available. Contact Tyco Electronics for additional arrangement numbers. Part Number MCDM3-3P** MCDM3-3S** MCDM3-5P** MCDM3-5S** MCDM3-7P** MCDM3-7S** MCDM3-8P** MCDM3-8S** MCDM3-10P** MCDM3-10S** MCDM3-12P** MCDM3-12S** MCDM3-17P** MCDM3-17S** A .005 [ .127] .780 19.81 .780 19.81 .930 23.62 .930 23.62 1.080 27.43 1.080 27.43 1.180 29.97 1.180 29.97 1.330 33.78 1.330 33.78 1.480 37.59 1.480 37.59 1.430 36.32 1.430 36.32 B .005 [ .127] .290 7.36 .365 9.27 .440 11.18 .515 13.08 .590 14.99 .665 16.89 .690 17.53 .765 19.43 .840 21.34 .915 23.24 .990 25.15 1.065 27.05 .940 23.88 1.015 25.78 C Max. D Max. .408 10.36 .408 10.36 .558 14.17 .558 14.17 .708 17.98 .708 17.98 .808 20.52 .808 20.52 .958 24.33 .958 24.33 1.108 27.89 1.108 27.89 1.058 26.87 1.058 26.87 .200 5.08 .200 5.08 .200 5.08 .200 5.08 .200 5.08 .200 5.08 .200 5.08 .200 5.08 .200 5.08 .200 5.08 .200 5.08 .200 5.08 .245 6.22 .245 6.22 E .005 [ .127] .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .208 5.28 .250 6.35 .250 6.35 F .005 [ .127] .565 14.35 .565 14.35 .715 18.16 .715 18.16 .865 21.97 .865 21.97 .965 24.51 .965 24.51 1.115 28.32 1.115 28.32 1.270 32.26 1.270 32.26 1.215 30.86 1.215 30.86 28 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Microminiature D Connectors MCDM Series Metal Shell RF COMBOMATE Connectors (Continued) 1 5 6 1 9 8 9 3 RG196 A/U or RG 178 B/U 1 15 11 12 21 7 RG196 A/U or RG 178 B/U 5 RG196 A/U or RG 178 B/U 1 13 14 Microminiature D Connectors Contact Arrangement as Viewed from the Engaging Face of the Pin Side 1 25 16 17 1 31 10 RG196 A/U or RG 178 B/U 8 RG196 A/U or RG 178 B/U 1 19 Center Conductor 20 37 12 RG196 A/U or RG 178 B/U 1 Shield 18 Termination Pattern 35 19 36 51 17 RG196 A/U or RG 178 B/U Note: The above contact arrangements are the maximum densities that can be obtained in each shell size when using RG 196 A/U or RG 178 B/U cable. 29 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Microminiature D Connectors MCDM Series Metal Shell Connectors Panel Mounting -- Cutout Dimensions Panel Mounting Dimensions -- MCDM .395 .005 [10.03 0.13] .200 .005 [5.08 0.13] Plug Plugand and Receptacle Receptacle Front Front Mounted Mounted Plug Plugand and Receptacle Receptacle Rear Rear Mounted Mounted .300 .005 [7.62 0.13] PlugFront Front Mounted Mounted Plug Receptacle Rear Rear Mounted Receptacle Mounted Panel Cutout Dimensions Screw Mounting Number of Contacts + .005 .089 - .000 + 0.13 [2.26 - 0.00 ] C 9 15 B 21 A Full Radius (Typ.) Front R .015 [.381] Max. Typ. 25 Figure 1 31 37 C .089 [2.26] A 51 B Fig. 1 2 1 2 1 2 1 2 1 2 1 2 1 2 A + .004 [+ .102] - .000 [- .000] .412 [10.46] .384 [9.75] .562 [14.27] .534 [13.56] .712 [18.08] .684 [17.37] .812 [20.62] .784 [19.91] .962 [24.43] .934 [23.72] 1.112 [28.24] 1.084 [27.53] 1.062 [26.97] 1.034 [26.26] B + .004 [+ .102] - .000 [- .000] .177 [4.50] .222 [5.64] .177 [4.50] .222 [5.64] .177 [4.50] .222 [5.64] .177 [4.50] .222 [5.64] .177 [4.50] .222 [5.64] .177 [4.50] .222 [5.64] .224 [5.69] .264 [6.71] C + .005 [+ .127] - .000 [- .000] .570 [14.48] .570 [14.48] .720 [18.29] .720 [18.29] .870 [22.10] .870 [22.10] .970 [24.64] .970 [24.64] 1.120 [28.45] 1.120 [28.45] 1.270 [32.26] 1.270 [32.26] 1.220 [30.99] 1.220 [30.99] + .005 Full Radius (Typ.) R .075 - .000 + 0.13 [1.90 - 0.00 ] 116/117 Rear Figure 2 Note: Front mounting preferred. 30 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Microminiature D Connectors MIL-DTL-83513 Cross Reference Microminiature D Connectors MCK (Metal Shell) Military Part No. M83513/01-A* M83513/01-B* M83513/01-C* M83513/01-D* M83513/01-E* M83513/01-F* M83513/01-G* M83513/01-H* M83513/02-A* M83513/02-B* M83513/02-C* M83513/02-D* M83513/02-E* M83513/02-F* M83513/02-G* M83513/02-H* M83513/03-A01* M83513/03-B01* M83513/03-C01* M83513/03-D01* M83513/03-E01* M83513/03-F01* M83513/03-G01* M83513/03-H01* M83513/03-A02* M83513/03-B02* M83513/03-C02* M83513/03-D02* M83513/03-E02* M83513/03-F02* M83513/03-G02* M83513/03-H02* M83513/03-A03* M83513/03-B03* M83513/03-C03* M83513/03-D03* M83513/03-E03* M83513/03-F03* M83513/03-G03* M83513/03-H03* M83513/03-A04* M83513/03-B04* M83513/03-C04* M83513/03-D04* M83513/03-E04* M83513/03-F04* M83513/03-G04* M83513/03-H04* M83513/03-A05* M83513/03-B05* M83513/03-C05* M83513/03-D05* M83513/03-E05* M83513/03-F05* M83513/03-G05* M83513/03-H05* M83513/03-A06* M83513/03-B06* M83513/03-C06* M83513/03-D06* MICRODOT Part No. MCK-**-B- 9PS MCK-**-B- 15PS MCK-**-B- 21PS MCK-**-B- 25PS MCK-**-B- 31PS MCK-**-B- 37PS MCK-**-B- 51PS MCK-**-B-100PS MCK-**-B- 9SS MCK-**-B- 15SS MCK-**-B- 21SS MCK-**-B- 25SS MCK-**-B- 31SS MCK-**-B- 37SS MCK-**-B- 51SS MCK-**-B-100SS MCK-**-B- 9P6G1-18.0 MCK-**-B- 15P6G1-18.0 MCK-**-B- 21P6G1-18.0 MCK-**-B- 25P6G1-18.0 MCK-**-B- 31P6G1-18.0 MCK-**-B- 37P6G1-18.0 MCK-**-B- 51P6G1-18.0 MCK-**-B-100P6G1-18.0 MCK-**-B- 9P6G1-36.0 MCK-**-B- 15P6G1-36.0 MCK-**-B- 21P6G1-36.0 MCK-**-B- 25P6G1-36.0 MCK-**-B- 31P6G1-36.0 MCK-**-B- 37P6G1-36.0 MCK-**-B- 51P6G1-36.0 MCK-**-B-100P6G1-36.0 MCK-**-B- 9P6G9-18.0 MCK-**-B- 15P6G9-18.0 MCK-**-B- 21P6G9-18.0 MCK-**-B- 25P6G9-18.0 MCK-**-B- 31P6G9-18.0 MCK-**-B- 37P6G9-18.0 MCK-**-B- 51P6G9-18.0 MCK-**-B-100P6G9-18.0 MCK-**-B- 9P6G9-36.0 MCK-**-B- 15P6G9-36.0 MCK-**-B- 21P6G9-36.0 MCK-**-B- 25P6G9-36.0 MCK-**-B- 31P6G9-36.0 MCK-**-B- 37P6G9-36.0 MCK-**-B- 51P6G9-36.0 MCK-**-B-100P6G9-36.0 MCK-**-B- 9P5L4-0.5 MCK-**-B- 15P5L4-0.5 MCK-**-B- 21P5L4-0.5 MCK-**-B- 25P5L4-0.5 MCK-**-B- 31P5L4-0.5 MCK-**-B- 37P5L4-0.5 MCK-**-B- 51P5L4-0.5 MCK-**-B-100P5L4-0.5 MCK-**-B- 9P5L4-1.0 MCK-**-B- 15P5L4-1.0 MCK-**-B- 21P5L4-1.0 MCK-**-B- 25P5L4-1.0 Military Part No. M83513/03-E06* M83513/03-F06* M83513/03-G06* M83513/03-H06* M83513/03-A07* M83513/03-B07* M83513/03-C07* M83513/03-D07* M83513/03-E07* M83513/03-F07* M83513/03-G07* M83513/03-H07* M83513/03-A08* M83513/03-B08* M83513/03-C08* M83513/03-D08* M83513/03-E08* M83513/03-F08* M83513/03-G08* M83513/03-H08* M83513/03-A09* M83513/03-B09* M83513/03-C09* M83513/03-D09* M83513/03-E09* M83513/03-F09* M83513/03-G09* M83513/03-H09* M83513/03-A10* M83513/03-B10* M83513/03-C10* M83513/03-D10* M83513/03-E10* M83513/03-F10* M83513/03-G10* M83513/03-H10* M83513/03-A11* M83513/03-B11* M83513/03-C11* M83513/03-D11* M83513/03-E11* M83513/03-F11* M83513/03-G11* M83513/03-H11* M83513/03-A12* M83513/03-B12* M83513/03-C12* M83513/03-D12* M83513/03-E12* M83513/03-F12* M83513/03-G12* M83513/03-H12* M83513/03-A13* M83513/03-B13* M83513/03-C13* M83513/03-D13* M83513/03-E13* M83513/03-F13* M83513/03-G13* M83513/03-H13* MICRODOT Part No. MCK-**-B- 31P5L4-1.0 MCK-**-B- 37P5L4-1.0 MCK-**-B- 51P5L4-1.0 MCK-**-B-100P5L4-1.0 MCK-**-B- 9P5L5-0.5 MCK-**-B- 15P5L5-0.5 MCK-**-B- 21P5L5-0.5 MCK-**-B- 25P5L5-0.5 MCK-**-B- 31P5L5-0.5 MCK-**-B- 37P5L5-0.5 MCK-**-B- 51P5L5-0.5 MCK-**-B-100P5L5-0.5 MCK-**-B- 9P5L5-1.0 MCK-**-B- 15P5L5-1.0 MCK-**-B- 21P5L5-1.0 MCK-**-B- 25P5L5-1.0 MCK-**-B- 31P5L5-1.0 MCK-**-B- 37P5L5-1.0 MCK-**-B- 51P5L5-1.0 MCK-**-B-100P5L5-1.0 MCK-**-B- 9P6Q1-18.0 MCK-**-B- 15P6Q1-18.0 MCK-**-B- 21P6Q1-18.0 MCK-**-B- 25P6Q1-18.0 MCK-**-B- 31P6Q1-18.0 MCK-**-B- 37P6Q1-18.0 MCK-**-B- 51P6Q1-18.0 MCK-**-B-100P6Q1-18.0 MCK-**-B- 9P6Q1-36.0 MCK-**-B- 15P6Q1-36.0 MCK-**-B- 21P6Q1-36.0 MCK-**-B- 25P6Q1-36.0 MCK-**-B- 31P6Q1-36.0 MCK-**-B- 37P6Q1-36.0 MCK-**-B- 51P6Q1-36.0 MCK-**-B-100P6Q1-36.0 MCK-**-B- 9P6Q9-18.0 MCK-**-B- 15P6Q9-18.0 MCK-**-B- 21P6Q9-18.0 MCK-**-B- 25P6Q9-18.0 MCK-**-B- 31P6Q9-18.0 MCK-**-B- 37P6Q9-18.0 MCK-**-B- 51P6Q9-18.0 MCK-**-B-100P6Q9-18.0 MCK-**-B- 9P6Q9-36.0 MCK-**-B- 15P6Q9-36.0 MCK-**-B- 21P6Q9-36.0 MCK-**-B- 25P6Q9-36.0 MCK-**-B- 31P6Q9-36.0 MCK-**-B- 37P6Q9-36.0 MCK-**-B- 51P6Q9-36.0 MCK-**-B-100P6Q9-36.0 MCK-**-B- 9P6G1-72.0 MCK-**-B- 1 5P6G1-72.0 MCK-**-B- 21P6G1-72.0 MCK-**-B- 25P6G1-72.0 MCK-**-B- 31P6G1-72.0 MCK-**-B- 37P6G1-72.0 MCK-**-B- 51P6G1-72.0 MCK-**-B-100P6G1-72.0 Military Part No. M83513/03-A14* M83513/03-B14* M83513/03-C14* M83513/03-D14* M83513/03-E14* M83513/03-F14* M83513/03-G14* M83513/03-H14* M83513/03-A15* M83513/03-B15* M83513/03-C15* M83513/03-D15* M83513/03-E15* M83513/03-F15* M83513/03-G15* M83513/03-H15* M83513/03-A16* M83513/03-B16* M83513/03-C16* M83513/03-D16* M83513/03-E16* M83513/03-F16* M83513/03-G16* M83513/03-H16* M83513/04-A01* M83513/04-B01* M83513/04-C01* M83513/04-D01* M83513/04-E01* M83513/04-F01* M83513/04-G01* M83513/04-H01* M83513/04-A02* M83513/04-B02* M83513/04-C02* M83513/04-D02* M83513/04-E02* M83513/04-F02* M83513/04-G02* M83513/04-H02* M83513/04-A03* M83513/04-B03* M83513/04-C03* M83513/04-D03* M83513/04-E03* M83513/04-F03* M83513/04-G03* M83513/04-H03* M83513/04-A04* M83513/04-B04* M83513/04-C04* M83513/04-D04* M83513/04-E04* M83513/04-F04* M83513/04-G04* M83513/04-H04* M83513/04-A05* M83513/04-B05* M83513/04-C05* M83513/04-D05* MICRODOT Part No. MCK-**-B- 9P6G9-72.0 MCK-**-B- 15P6G9-72.0 MCK-**-B- 21P6G9-72.0 MCK-**-B- 25P6G9-72.0 MCK-**-B- 31P6G9-72.0 MCK-**-B- 37P6G9-72.0 MCK-**-B- 51P6G9-72.0 MCK-**-B-100P6G9-72.0 MCK-**-B- 9P6Q1-72.0 MCK-**-B- 15P6Q1-72.0 MCK-**-B- 21P6Q1-72.0 MCK-**-B- 25P6Q1-72.0 MCK-**-B- 31P6Q1-72.0 MCK-**-B- 37P6Q1-72.0 MCK-**-B- 51P6Q1-72.0 MCK-**-B-100P6Q1-72.0 MCK-**-B- 9P6Q9-72.0 MCK-**-B- 15P6Q9-72.0 MCK-**-B- 21P6Q9-72.0 MCK-**-B- 25P6Q9-72.0 MCK-**-B- 31P6Q9-72.0 MCK-**-B- 37P6Q9-72.0 MCK-**-B- 51P6Q9-72.0 MCK-**-B-100P6Q9-72.0 MCK-**-B- 9S6G1-18.0 MCK-**-B- 15S6G1-18.0 MCK-**-B- 21S6G1-18.0 MCK-**-B- 25S6G1-18.0 MCK-**-B- 31S6G1-18.0 MCK-**-B- 37S6G1-18.0 MCK-**-B- 51S6G1-18.0 MCK-**-B-100S6G1-18.0 MCK-**-B- 9S6G1-36.0 MCK-**-B- 15S6G1-36.0 MCK-**-B- 21S6G1-36.0 MCK-**-B- 25S6G1-36.0 MCK-**-B- 31S6G1-36.0 MCK-**-B- 37S6G1-36.0 MCK-**-B- 51S6G1-36.0 MCK-**-B-100S6G1-36.0 MCK-**-B- 9S6G9-18.0 MCK-**-B- 15S6G9-18.0 MCK-**-B- 21S6G9-18.0 MCK-**-B- 25S6G9-18.0 MCK-**-B- 31S6G9-18.0 MCK-**-B- 37S6G9-18.0 MCK-**-B- 51S6G9-18.0 MCK-**-B-100S6G9-18.0 MCK-**-B- 9S6G9-36.0 MCK-**-B- 15S6G9-36.0 MCK-**-B- 21S6G9-36.0 MCK-**-B- 25S6G9-36.0 MCK-**-B- 31S6G9-36.0 MCK-**-B- 37S6G9-36.0 MCK-**-B- 51S6G9-36.0 MCK-**-B-100S6G9-36.0 MCK-**-B- 9S5L4-0.5 MCK-**-B- 15S5L4-0.5 MCK-**-B- 21S5L4-0.5 MCK-**-B- 25S5L4-0.5 1 31 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Microminiature D Connectors MIL-DTL-83513 Cross Reference (Continued) MCK (Metal Shell) (Continued) Military Part No. M83513/04-E05* M83513/04-F05* M83513/04-G05* M83513/04-H05* M83513/04-A06* M83513/04-B06* M83513/04-C06* M83513/04-D06* M83513/04-E06* M83513/04-F06* M83513/04-G06* M83513/04-H06* M83513/04-A07* M83513/04-B07* M83513/04-C07* M83513/04-D07* M83513/04-E07* M83513/04-F07* M83513/04-G07* M83513/04-H07* M83513/04-A08* M83513/04-B08* M83513/04-C08* M83513/04-D08* M83513/04-E08* M83513/04-F08* M83513/04-G08* M83513/04-H08* M83513/04-A09* M83513/04-B09* M83513/04-C09* MICRODOT Part No. MCK-**-B- 31S5L4-0.5 MCK-**-B- 37S5L4-0.5 MCK-**-B- 51S5L4-0.5 MCK-**-B-100S5L4-0.5 MCK-**-B- 9S5L4-1.0 MCK-**-B- 15S5L4-1.0 MCK-**-B- 21S5L4-1.0 MCK-**-B- 25S5L4-1.0 MCK-**-B- 31S5L4-1.0 MCK-**-B- 37S5L4-1.0 MCK-**-B- 51S5L4-1.0 MCK-**-B-100S5L4-1.0 MCK-**-B- 9S5L5-0.5 MCK-**-B- 15S5L5-0.5 MCK-**-B- 21S5L5-0.5 MCK-**-B- 25S5L5-0.5 MCK-**-B- 31S5L5-0.5 MCK-**-B- 37S5L5-0.5 MCK-**-B- 51S5L5-0.5 MCK-**-B-100S5L5-0.5 MCK-**-B- 9S5L5-1.0 MCK-**-B- 15S5L5-1.0 MCK-**-B- 21S5L5-1.0 MCK-**-B- 25S5L5-1.0 MCK-**-B- 31S5L5-1.0 MCK-**-B- 37S5L5-1.0 MCK-**-B- 51S5L5-1.0 MCK-**-B-100S5L5-1.0 MCK-**-B- 9S6Q1-18.0 MCK-**-B- 15S6Q1-18.0 MCK-**-B- 21S6Q1-18.0 Military Part No. M83513/04-D09* M83513/04-E09* M83513/04-F09* M83513/04-G09* M83513/04-H09* M83513/04-A10* M83513/04-B10* M83513/04-C10* M83513/04-D10* M83513/04-E10* M83513/04-F10* M83513/04-G10* M83513/04-H10* M83513/04-A11* M83513/04-B11* M83513/04-C11* M83513/04-D11* M83513/04-E11* M83513/04-F11* M83513/04-G11* M83513/04-H11* M83513/04-A12* M83513/04-B12* M83513/04-C12* M83513/04-D12* M83513/04-E12* M83513/04-F12* M83513/04-G12* M83513/04-H12* M83513/04-A13* M83513/04-B13* MICRODOT Part No. MCK-**-B- 25S6Q1-18.0 MCK-**-B- 31S6Q1-18.0 MCK-**-B- 37S6Q1-18.0 MCK-**-B- 51S6Q1-18.0 MCK-**-B-100S6Q1-18.0 MCK-**-B- 9S6Q1-36.0 MCK-**-B- 15S6Q1-36.0 MCK-**-B- 21S6Q1-36.0 MCK-**-B- 25S6Q1-36.0 MCK-**-B- 31S6Q1-36.0 MCK-**-B- 37S6Q1-36.0 MCK-**-B- 51S6Q1-36.0 MCK-**-B-100S6Q1-36.0 MCK-**-B- 9S6Q9-18.0 MCK-**-B- 15S6Q9-18.0 MCK-**-B- 21S6Q9-18.0 MCK-**-B- 25S6Q9-18.0 MCK-**-B- 31S6Q9-18.0 MCK-**-B- 37S6Q9-18.0 MCK-**-B- 51S6Q9-18.0 MCK-**-B-100S6Q9-18.0 MCK-**-B- 9S6Q9-36.0 MCK-**-B- 15S6Q9-36.0 MCK-**-B- 21S6Q9-36.0 MCK-**-B- 25S6Q9-36.0 MCK-**-B- 31S6Q9-36.0 MCK-**-B- 37S6Q9-36.0 MCK-**-B- 51S6Q9-36.0 MCK-**-B-100S6Q9-36.0 MCK-**-B- 9S6G1-72.0 MCK-**-B- 15S6G1-72.0 Military Part No. M83513/04-C13* M83513/04-D13* M83513/04-E13* M83513/04-F13* M83513/04-G13* M83513/04-H13* M83513/04-A14* M83513/04-B14* M83513/04-C14* M83513/04-D14* M83513/04-E14* M83513/04-F14* M83513/04-G14* M83513/04-H14* M83513/04-A15* M83513/04-B15* M83513/04-C15* M83513/04-D15* M83513/04-E15* M83513/04-F15* M83513/04-G15* M83513/04-H15* M83513/04-A16* M83513/04-B16* M83513/04-C16* M83513/04-D16* M83513/04-E16* M83513/04-F16* M83513/04-G16* M83513/04-H16* MICRODOT Part No. MCK-**-B- 21S6G1-72.0 MCK-**-B- 25S6G1-72.0 MCK-**-B- 31S6G1-72.0 MCK-**-B- 37S6G1-72.0 MCK-**-B- 51S6G1-72.0 MCK-**-B-100S6G1-72.0 MCK-**-B- 9S6G9-72.0 MCK-**-B- 15S6G9-72.0 MCK-**-B- 21S6G9-72.0 MCK-**-B- 25S6G9-72.0 MCK-**-B- 31S6G9-72.0 MCK-**-B- 37S6G9-72.0 MCK-**-B- 51S6G9-72.0 MCK-**-B-100S6G9-72.0 MCK-**-B- 9S6Q1-72.0 MCK-**-B- 15S6Q1-72.0 MCK-**-B- 21S6Q1-72.0 MCK-**-B- 25S6Q1-72.0 MCK-**-B- 31S6Q1-72.0 MCK-**-B- 37S6Q1-72.0 MCK-**-B- 51S6Q1-72.0 MCK-**-B-100S6Q1-72.0 MCK-**-B- 9S6Q9-72.0 MCK-**-B- 15S6Q9-72.0 MCK-**-B- 21S6Q9-72.0 MCK-**-B- 25S6Q9-72.0 MCK-**-B- 31S6Q9-72.0 MCK-**-B- 37S6Q9-72.0 MCK-**-B- 51S6Q9-72.0 MCK-**-B-100S6Q9-72.0 MICRODOT Part No. "JACKPOST ASSY #2" "JACKPOST ASSY, #4" *C = Cadmium or N = Nickel (space applications only) **C2 = Cadmium or N1 = Nickel (space applications only) Hardware MICRODOT Part No. "A. HD, J/S, L.F, #2" "A. HD, J/S, L.F, #4" "A. HD, J/S,H.F, #2" "A. HD, J/S, H.F. #4" Military Part No. M83513/05-02 M83513/05-12 M83513/05-03 M83513/05-13 Military Part No. M83513/05-05 M83513/05-15 M83513/05-06 M83513/05-16 MICRODOT Part No. "S. HD, J/S, L.F, #2" "S. HD, J/S, L.F, #4" "S. HD, J/S, H.F, #2" "S. HD, J/S, H.F, #4" Military Part No. M83513/05-07 M83513/05-17 Military Part No. M83513/07-G M83513/08-A01 M83513/08-B01 M83513/08-C01 M83513/08-D01 M83513/08-E01 M83513/08-F01 M83513/08-G01 M83513/08-A02 M83513/08-B02 M83513/08-C02 M83513/08-D02 M83513/08-E02 MICRODOT Part No. MCDR3-B-51SS MCDR3-B- 9P6G1-18.0 MCDR3-B-15P6G1-18.0 MCDR3-B-21P6G1-18.0 MCDR3-B-25P6G1-18.0 MCDR3-B-31P6G1-18.0 MCDR3-B-37P6G1-18.0 MCDR3-B-51P6G1-18.0 MCDR3-B- 9P6G1-36.0 MCDR3-B-15P6G1-36.0 MCDR3-B-21P6G1-36.0 MCDR3-B-25P6G1-36.0 MCDR3-B-31P6G1-36.0 Military Part No. M83513/08-F02 M83513/08-G02 M83513/08-A03 M83513/08-B03 M83513/08-C03 M83513/08-D03 M83513/08-E03 M83513/08-F03 M83513/08-G03 M83513/08-A04 M83513/08-B04 M83513/08-C04 M83513/08-D04 MCDR (Plastic Shell) Military Part No. M83513/06-A M83513/06-B M83513/06-C M83513/06-D M83513/06-E M83513/06-F M83513/06-G M83513/07-A M83513/07-B M83513/07-C M83513/07-D M83513/07-E M83513/07-F MICRODOT Part No. MCDR3-B- 9PS MCDR3-B-15PS MCDR3-B-21PS MCDR3-B-25PS MCDR3-B-31PS MCDR3-B-37PS MCDR3-B-51PS MCDR3-B- 9SS MCDR3-B-15SS MCDR3-B-21SS MCDR3-B-25SS MCDR3-B-31SS MCDR3-B-37SS MICRODOT Part No. MCDR3-B-37P6G1-36.0 MCDR3-B-51P6G1-36.0 MCDR3-B- 9P6G9-18.0 MCDR3-B-15P6G9-18.0 MCDR3-B-21P6G9-18.0 MCDR3-B-25P6G9-18.0 MCDR3-B-31P6G9-18.0 MCDR3-B-37P6G9-18.0 MCDR3-B-51P6G9-18.0 MCDR3-B- 9P6G9-36.0 MCDR3-B-15P6G9-36.0 MCDR3-B-21P6G9-36.0 MCDR3-B-25P6G9-36.0 32 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Microminiature D Connectors MIL-DTL-83513 Cross Reference (Continued) Microminiature D Connectors MCDR (Plastic Shell) (Continued) Military Part No. M83513/08-E04 M83513/08-F04 M83513/08-G04 M83513/08-A05 M83513/08-B05 M83513/08-C05 M83513/08-D05 M83513/08-E05 M83513/08-F05 M83513/08-G05 M83513/08-A06 M83513/08-B06 M83513/08-C06 M83513/08-D06 M83513/08-E06 M83513/08-F06 M83513/08-G06 M83513/08-A07 M83513/08-B07 M83513/08-C07 M83513/08-D07 M83513/08-E07 M83513/08-F07 M83513/08-G07 M83513/08-A08 M83513/08-B08 M83513/08-C08 M83513/08-D08 M83513/08-E08 M83513/08-F08 M83513/08-G08 M83513/08-A09 M83513/08-B09 M83513/08-C09 M83513/08-D09 M83513/08-E09 M83513/08-F09 M83513/08-G09 M83513/08-A10 M83513/08-B10 M83513/08-C10 M83513/08-D10 M83513/08-E10 M83513/08-F10 M83513/08-G10 M83513/08-A11 M83513/08-B11 M83513/08-C11 M83513/08-D11 M83513/08-E11 M83513/08-F11 M83513/08-G11 M83513/08-A12 M83513/08-B12 M83513/08-C12 M83513/08-D12 M83513/08-E12 M83513/08-F12 M83513/08-G12 M83513/08-A13 MICRODOT Part No. MCDR3-B-31P6G9-36.0 MCDR3-B-37P6G9-36.0 MCDR3-B-51P6G9-36.0 MCDR3-B- 9P5L4-0.5 MCDR3-B-15P5L4-0.5 MCDR3-B-21P5L4-0.5 MCDR3-B-25P5L4-0.5 MCDR3-B-31P5L4-0.5 MCDR3-B-37P5L4-0.5 MCDR3-B-51P5L4-0.5 MCDR3-B- 9P5L4-1.0 MCDR3-B-15P5L4-1.0 MCDR3-B-21P5L4-1.0 MCDR3-B-25P5L4-1.0 MCDR3-B-31P5L4-1.0 MCDR3-B-37P5L4-1.0 MCDR3-B-51P5L4-1.0 MCDR3-B- 9P5L5-0.5 MCDR3-B-15P5L5-0.5 MCDR3-B-21P5L5-0.5 MCDR3-B-25P5L5-0.5 MCDR3-B-31P5L5-0.5 MCDR3-B-37P5L5-0.5 MCDR3-B-51P5L5-0.5 MCDR3-B- 9P5L5-1.0 MCDR3-B-15P5L5-1.0 MCDR3-B-21P5L5-1.0 MCDR3-B-25P5L5-1.0 MCDR3-B-31P5L5-1.0 MCDR3-B-37P5L5-1.0 MCDR3-B-51P5L5-1.0 MCDR3-B- 9P6Q1-18.0 MCDR3-B-15P6Q1-18.0 MCDR3-B-21P6Q1-18.0 MCDR3-B-25P6Q1-18.0 MCDR3-B-31P6Q1-18.0 MCDR3-B-37P6Q1-18.0 MCDR3-B-51P6Q1-18.0 MCDR3-B- 9P6Q1-36.0 MCDR3-B-15P6Q1-36.0 MCDR3-B-21P6Q1-36.0 MCDR3-B-25P6Q1-36.0 MCDR3-B-31P6Q1-36.0 MCDR3-B-37P6Q1-36.0 MCDR3-B-51P6Q1-36.0 MCDR3-B- 9P6Q9-18.0 MCDR3-B-15P6Q9-18.0 MCDR3-B-21P6Q9-18.0 MCDR3-B-25P6Q9-18.0 MCDR3-B-31P6Q9-18.0 MCDR3-B-37P6Q9-18.0 MCDR3-B-51P6Q9-18.0 MCDR3-B- 9P6Q9-36.0 MCDR3-B-15P6Q9-36.0 MCDR3-B-21P6Q9-36.0 MCDR3-B-25P6Q9-36.0 MCDR3-B-31P6Q9-36.0 MCDR3-B-37P6Q9-36.0 MCDR3-B-51P6Q9-36.0 MCDR3-B- 9P6G1-72.0 Military Part No. M83513/08-B13 M83513/08-C13 M83513/08-D13 M83513/08-E13 M83513/08-F13 M83513/08-G13 M83513/08-A14 M83513/08-B14 M83513/08-C14 M83513/08-D14 M83513/08-E14 M83513/08-F14 M83513/08-G14 M83513/08-A15 M83513/08-B15 M83513/08-C15 M83513/08-D15 M83513/08-E15 M83513/08-F15 M83513/08-G15 M83513/08-A16 M83513/08-B16 M83513/08-C16 M83513/08-D16 M83513/08-E16 M83513/08-F16 M83513/08-G16 M83513/09-A01 M83513/09-B01 M83513/09-C01 M83513/09-D01 M83513/09-E01 M83513/09-F01 M83513/09-G01 M83513/09-A02 M83513/09-B02 M83513/09-C02 M83513/09-D02 M83513/09-E02 M83513/09-F02 M83513/09-G02 M83513/09-A03 M83513/09-B03 M83513/09-C03 M83513/09-D03 M83513/09-E03 M83513/09-F03 M83513/09-G03 M83513/09-A04 M83513/09-B04 M83513/09-C04 M83513/09-D04 M83513/09-E04 M83513/09-F04 M83513/09-G04 M83513/09-A05 M83513/09-B05 M83513/09-C05 M83513/09-D05 M83513/09-E05 MICRODOT Part No. MCDR3-B-15P6G1-72.0 MCDR3-B-21P6G1-72.0 MCDR3-B-25P6G1-72.0 MCDR3-B-31P6G1-72.0 MCDR3-B-37P6G1-72.0 MCDR3-B-51P6G1-72.0 MCDR3-B- 9P6G9-72.0 MCDR3-B-15P6G9-72.0 MCDR3-B-21P6G9-72.0 MCDR3-B-25P6G9-72.0 MCDR3-B-31P6G9-72.0 MCDR3-B-37P6G9-72.0 MCDR3-B-51P6G9-72.0 MCDR3-B- 9P6Q1-72.0 MCDR3-B-15P6Q1-72.0 MCDR3-B-21P6Q1-72.0 MCDR3-B-25P6Q1-72.0 MCDR3-B-31P6Q1-72.0 MCDR3-B-37P6Q1-72.0 MCDR3-B-51P6Q1-72.0 MCDR3-B- 9P6Q9-72.0 MCDR3-B-15P6Q9-72.0 MCDR3-B-21P6Q9-72.0 MCDR3-B-25P6Q9-72.0 MCDR3-B-31P6Q9-72.0 MCDR3-B-37P6Q9-72.0 MCDR3-B-51P6Q9-72.0 MCDR3-B- 9S6G1-18.0 MCDR3-B-15S6G1-18.0 MCDR3-B-21S6G1-18.0 MCDR3-B-25S6G1-18.0 MCDR3-B-31S6G1-18.0 MCDR3-B-37S6G1-18.0 MCDR3-B-51S6G1-18.0 MCDR3-B- 9S6G1-36.0 MCDR3-B-15S6G1-36.0 MCDR3-B-21S6G1-36.0 MCDR3-B-25S6G1-36.0 MCDR3-B-31S6G1-36.0 MCDR3-B-37S6G1-36.0 MCDR3-B-51S6G1-36.0 MCDR3-B- 9S6G9-18.0 MCDR3-B- 15S6G9-18.0 MCDR3-B- 21S6G9-18.0 MCDR3-B-25S6G9-18.0 MCDR3-B-31S6G9-18.0 MCDR3-B-37S6G9-18.0 MCDR3-B-51S6G9-18.0 MCDR3-B- 9S6G9-36.0 MCDR3-B-15S6G9-36.0 MCDR3-B-21S6G9-36.0 MCDR3-B-25S6G9-36.0 MCDR3-B-31S6G9-36.0 MCDR3-B-37S6G9-36.0 MCDR3-B-51S6G9-36.0 MCDR3-B- 9S5L4-0.5 MCDR3-B-15S5L4-0.5 MCDR3-B-21S5L4-0.5 MCDR3-B-25S5L4-0.5 MCDR3-B-31S5L4-0.5 Military Part No. M83513/09-F05 M83513/09-G05 M83513/09-A06 M83513/09-B06 M83513/09-C06 M83513/09-D06 M83513/09-E06 M83513/09-F06 M83513/09-G06 M83513/09-A07 M83513/09-B07 M83513/09-C07 M83513/09-D07 M83513/09-E07 M83513/09-F07 M83513/09-G07 M83513/09-A08 M83513/09-B08 M83513/09-C08 M83513/09-D08 M83513/09-E08 M83513/09-F08 M83513/09-G08 M83513/09-A09 M83513/09-B09 M83513/09-C09 M83513/09-D09 M83513/09-E09 M83513/09-F09 M83513/09-G09 M83513/09-A10 M83513/09-B10 M83513/09-C10 M83513/09-D10 M83513/09-E10 M83513/09-F10 M83513/09-G10 M83513/09-A11 M83513/09-B11 M83513/09-C11 M83513/09-D11 M83513/09-E11 M83513/09-F11 M83513/09-G11 M83513/09-A12 M83513/09-B12 M83513/09-C12 M83513/09-D12 M83513/09-E12 M83513/09-F12 M83513/09-G12 M83513/09-A13 M83513/09-B13 M83513/09-C13 M83513/09-D13 M83513/09-E13 M83513/09-F13 M83513/09-G13 M83513/09-A14 M83513/09-B14 MICRODOT Part No. MCDR3-B-37S5L4-0.5 MCDR3-B-51S5L4-0.5 MCDR3-B- 9S5L4-1.0 MCDR3-B-15S5L4-1.0 MCDR3-B-21S5L4-1.0 MCDR3-B-25S5L4-1.0 MCDR3-B-31S5L4-1.0 MCDR3-B-37S5L4-1.0 MCDR3-B-51S5L4-1.0 MCDR3-B- 9S5L5-0.5 MCDR3-B-15S5L5-0.5 MCDR3-B-21S5L5-0.5 MCDR3-B-25S5L5-0.5 MCDR3-B-31S5L5-0.5 MCDR3-B-37S5L5-0.5 MCDR3-B-51S5L5-0.5 MCDR3-B- 9S5L5-1.0 MCDR3-B-15S5L5-1.0 MCDR3-B-21S5L5-1.0 MCDR3-B-25S5L5-1.0 MCDR3-B-31S5L5-1.0 MCDR3-B-37S5L5-1.0 MCDR3-B-51S5L5-1.0 MCDR3-B- 9S6Q1-18.0 MCDR3-B-15S6Q1-18.0 MCDR3-B-21S6Q1-18.0 MCDR3-B-25S6Q1-18.0 MCDR3-B-31S6Q1-18.0 MCDR3-B-37S6Q1-18.0 MCDR3-B-51S6Q1-18.0 MCDR3-B- 9S6Q1-36.0 MCDR3-B-15S6Q1-36.0 MCDR3-B-21S6Q1-36.0 MCDR3-B-25S6Q1-36.0 MCDR3-B-31S6Q1-36.0 MCDR3-B-37S6Q1-36.0 MCDR3-B-51S6Q1-36.0 MCDR3-B- 9S6Q9-18.0 MCDR3-B-15S6Q9-18.0 MCDR3-B-21S6Q9-18.0 MCDR3-B-25S6Q9-18.0 MCDR3-B-31S6Q9-18.0 MCDR3-B-37S6Q9-18.0 MCDR3-B-51S6Q9-18.0 MCDR3-B- 9S6Q9-36.0 MCDR3-B-15S6Q9-36.0 MCDR3-B-21S6Q9-36.0 MCDR3-B-25S6Q9-36.0 MCDR3-B-31S6Q9-36.0 MCDR3-B-37S6Q9-36.0 MCDR3-B-51S6Q9-36.0 MCDR3-B- 9S6G1-72.0 MCDR3-B-15S6G1-72.0 MCDR3-B-21S6G1-72.0 MCDR3-B-25S6G1-72.0 MCDR3-B-31S6G1-72.0 MCDR3-B-37S6G1-72.0 MCDR3-B-51S6G1-72.0 MCDR3-B- 9S6G9-72.0 MCDR3-B-15S6G9-72.0 1 33 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Microminiature D Connectors MIL-DTL-83513 Cross Reference (Continued) MCDR (Plastic Shell) (Continued) Military Part No. M83513/09-C14 M83513/09-D14 M83513/09-E14 M83513/09-F14 M83513/09-G14 M83513/09-A15 M83513/09-B15 MICRODOT Part No. MCDR3-B-21S6G9-72.0 MCDR3-B-25S6G9-72.0 MCDR3-B-31S6G9-72.0 MCDR3-B-37S6G9-72.0 MCDR3-B-51S6G9-72.0 MCDR3-B- 9S6Q1-72.0 MCDR3-B-15S6Q1-72.0 Military Part No. M83513/09-C15 M83513/09-D15 M83513/09-E15 M83513/09-F15 M83513/09-G15 M83513/09-A16 M83513/09-B16 MICRODOT Part No. MCDR3-B-21S6Q1-72.0 MCDR3-B-25S6Q1-72.0 MCDR3-B-31S6Q1-72.0 MCDR3-B-37S6Q1-72.0 MCDR3-B-51S6Q1-72.0 MCDR3-B- 9S6Q9-72.0 MCDR3-B-15S6Q9-72.0 Military Part No. M83513/09-C16 M83513/09-D16 M83513/09-E16 M83513/09-F16 M83513/09-G16 MICRODOT Part No. MCDR3-B-21S6Q9-72.0 MCDR3-B-25S6Q9-72.0 MCDR3-B-31S6Q9-72.0 MCDR3-B-37S6Q9-72.0 MCDR3-B-51S6Q9-72.0 MCK (Metal Shell) Military Part No. MICRODOT Part No. M83513/10-A01*N M83513/10-B01*N M83513/10-C01*N M83513/10-D01*N M83513/10-E01*N M83513/10-F01*N M83513/10-A01*P M83513/10-B01*P M83513/10-C01*P M83513/10-D01*P M83513/10-E01*P M83513/10-F01*P M83513/10-A02*N M83513/10-B02*N M83513/10-C02*N M83513/10-D02*N M83513/10-E02*N M83513/10-F02*N M83513/10-A02*P M83513/10-B02*P M83513/10-C02*P M83513/10-D02*P M83513/10-E02*P M83513/10-F02*P M83513/10-A03*N M83513/10-B03*N M83513/10-C03*N M83513/10-D03*N M83513/10-E03*N M83513/10-F03*N M83513/10-A03*P M83513/10-B03*P M83513/10-C03*P M83513/10-D03*P M83513/10-E03*P M83513/10-F03*P M83513/11-G01*N M83513/11-G01*P M83513/11-G02*N M83513/11-G02*P M83513/11-G03*N M83513/11-G03*P M83513/12-H01*N M83513/12-H01*P M83513/12-H02*N M83513/12-H02*P M83513/12-H03*N MCK-**-B- 9PRT1 MCK-**-B- 15PRT1 MCK-**-B- 21PRT1 MCK-**-B- 25PRT1 MCK-**-B- 31PRT1 MCK-**-B- 37PRT1 MCK-**-P- 9PRT1 MCK-**-P- 15PRT1 MCK-**-P- 21PRT1 MCK-**-P- 25PRT1 MCK-**-P- 31PRT1 MCK-**-P- 37PRT1 MCK-**-B- 9PRT1A MCK-**-B- 15PRT1A MCK-**-B- 21PRT1A MCK-**-B- 25PRT1A MCK-**-B- 31PRT1A MCK-**-B- 37PRT1A MCK-**-P- 9PRT1A MCK-**-P- 15PRT1A MCK-**-P- 21PRT1A MCK-**-P- 25PRT1A MCK-**-P- 31PRT1A MCK-**-P- 37PRT1A MCK-**-B- 9PRT1B MCK-**-B- 15PRT1B MCK-**-B- 21PRT1B MCK-**-B- 25PRT1B MCK-**-B- 31PRT1B MCK-**-B- 37PRT1B MCK-**-P- 9PRT1B MCK-**-P- 15PRT1B MCK-**-P- 21PRT1B MCK-**-P- 25PRT1B MCK-**-P- 31PRT1B MCK-**-P- 37PRT1B MCK-**-B- 51PRT1 MCK-**-P- 51PRT1 MCK-**-B- 51PRT1A MCK-**-P- 51PRT1A MCK-**-B- 51PRT1B MCK-**-P- 51PRT1B MCK-**-B-100PRT1 MCK-**-P-100PRT1 MCK-**-B-100PRT1A MCK-**-P-100PRT1A MCK-**-B-100PRT1B Military Part No. M83513/12-H03*P M83513/13-A01*N M83513/13-B01*N M83513/13-C01*N M83513/13-D01*N M83513/13-E01*N M83513/13-F01*N M83513/13-A01*P M83513/13-B01*P M83513/13-C01*P M83513/13-D01*P M83513/13-E01*P M83513/13-F01*P M83513/13-A02*N M83513/13-B02*N M83513/13-C02*N M83513/13-D02*N M83513/13-E02*N M83513/13-F02*N M83513/13-A02*P M83513/13-B02*P M83513/13-C02*P M83513/13-D02*P M83513/13-E02*P M83513/13-F02*P M83513/13-A03*N M83513/13-B03*N M83513/13-C03*N M83513/13-D03*N M83513/13-E03*N M83513/13-F03*N M83513/13-A03*P M83513/13-B03*P M83513/13-C03*P M83513/13-D03*P M83513/13-E03*P M83513/13-F03*P M83513/14-G01*N M83513/14-G01*P M83513/14-G02*N M83513/14-G02*P M83513/14-G03*N M83513/14-G03*P M83513/15-H01*N M83513/15-H01*P M83513/15-H02*N M83515/15-H02*P MICRODOT Part No. MCK-**-P-100PRT1B MCK-**-B- 9SRT1 MCK-**-B- 15SRT1 MCK-**-B- 21SRT1 MCK-**-B- 25SRT1 MCK-**-B- 31SRT1 MCK-**-B- 37SRT1 MCK-**-P- 9SRT1 MCK-**-P- 15SRT1 MCK-**-P- 21SRT1 MCK-**-P- 25SRT1 MCK-**-P- 31SRT1 MCK-**-P- 37SRT1 MCK-**-B- 9SRT1A MCK-**-B- 15SRT1A MCK-**-B- 21SRT1A MCK-**-B- 25SRT1A MCK-**-B- 31SRT1A MCK-**-B- 37SRT1A MCK-**-P- 9SRT1A MCK-**-P- 15SRT1A MCK-**-P- 21SRT1A MCK-**-P- 25SRT1A MCK-**-P- 31SRT1A MCK-**-P- 37SRT1A MCK-**-B- 9SRT1B MCK-**-B- 15SRT1B MCK-**-B- 21SRT1B MCK-**-B- 25SRT1B MCK-**-B- 31SRT1B MCK-**-B- 37SRT1B MCK-**-P- 9SRT1B MCK-**-P- 15SRT1B MCK-**-P- 21SRT1B MCK-**-P- 25SRT1B MCK-**-P- 31SRT1B MCK-**-P- 37SRT1B MCK-**-B- 51SRT1 MCK-**-P- 51SRT1 MCK-**-B- 51SRT1A MCK-**-P- 51SRT1A MCK-**-B- 51SRT1B MCK-**-P- 51SRT1B MCK-**-B-100SRT1 MCK-**-P-100SRT1 MCK-**-B-100SRT1A MCK-**-P-100SRT1A Military Part No. M83513/15-H03*N M83513/15-H03*P M83513/16-A01*N M83513/16-B01*N M83513/16-C01*N M83513/16-D01*N M83513/16-E01*N M83513/16-F01*N M83513/16-A01*P M83513/16-B01*P M83513/16-C01*P M83513/16-D01*P M83513/16-E01*P M83513/16-F01*P M83513/16-A02*N M83513/16-B02*N M83513/16-C02*N M83513/16-D02*N M83513/16-E02*N M83513/16-F02*N M83513/16-A02*P M83513/16-B02*P M83513/16-C02*P M83513/16-D02*P M83513/16-E02*P M83513/16-F02*P M83513/16-A03*N M83513/16-B03*N M83513/16-C03*N M83513/16-D03*N M83513/16-E03*N M83513/16-F03*N M83513/16-A03*P M83513/16-B03*P M83513/16-C03*P M83513/16-D03*P M83513/16-E03*P M83513/16-F03*P M83513/17-G01*N M83513/17-G01*P M83513/17-G02*N M83513/17-G02*P M83513/17-G03*N M83513/17-G03*P M83513/18-H01*N M83513/18-H01*P M83513/18-H02*N MICRODOT Part No. MCK-**-B-100SRT1B MCK-**-P-100SRT1B MCK-**-B- 9PRT3 MCK-**-B- 15PRT3 MCK-**-B- 21PRT3 MCK-**-B- 25PRT3 MCK-**-B- 31PRT3 MCK-**-B- 37PRT3 MCK-**-P- 9PRT3 MCK-**-P- 15PRT3 MCK-**-P- 21PRT3 MCK-**-P- 25PRT3 MCK-**-P- 31PRT3 MCK-**-P- 37PRT3 MCK-**-B- 9PRT3A MCK-**-B- 15PRT3A MCK-**-B- 21PRT3A MCK-**-B- 25PRT3A MCK-**-B- 31PRT3A MCK-**-B- 37PRT3A MCK-**-P- 9PRT3A MCK-**-P- 15PRT3A MCK-**-P- 21PRT3A MCK-**-P- 25PRT3A MCK-**-P- 31PRT3A MCK-**-P- 37PRT3A MCK-**-B- 9PRT3B MCK-**-B- 15PRT3B MCK-**-B- 21PRT3B MCK-**-B- 25PRT3B MCK-**-B- 31PRT3B MCK-**-B- 37PRT3B MCK-**-P- 9PRT3B MCK-**-P- 15PRT3B MCK-**-P- 21PRT3B MCK-**-P- 25PRT3B MCK-**-P- 31PRT3B MCK-**-P- 37PRT3B MCK-**-B- 51PRT3 MCK-**-P- 51PRT3 MCK-**-B- 51PRT3A MCK-**-P- 51PRT3A MCK-**-B- 51PRT3B MCK-**-P- 51PRT3B MCK-**-B-100PRT3 MCK-**-P-100PRT3 MCK-**-B-100PRT3A 34 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Microminiature D Connectors MIL-DTL-83513 Cross Reference (Continued) Microminiature D Connectors MCK (Metal Shell) (Continued) Military Part No. M83515/18-H02*P M83513/18-H03*N M83513/18-H03*P M83513/19-A01*N M83513/19-B01*N M83513/19-C01*N M83513/19-D01*N M83513/19-E01*N M83513/19-F01*N M83513/19-A01*P M83513/19-B01*P M83513/19-C01*P M83513/19-D01*P M83513/19-E01*P M83513/19-F01*P M83513/19-A02*N M83513/19-B02*N M83513/19-C02*N M83513/19-D02*N M83513/19-E02*N M83513/19-F02*N M83513/19-A02*P M83513/19-B02*P M83513/19-C02*P M83513/19-D02*P M83513/19-E02*P M83513/19-F02*P M83513/19-A03*N M83513/19-B03*N M83513/19-C03*N M83513/19-D03*N M83513/19-E03*N M83513/19-F03*N M83513/19-A03*P M83513/19-B03*P M83513/19-C03*P M83513/19-D03*P M83513/19-E03*P M83513/19-F03*P M83513/20-G01*N M83513/20-G01*P M83513/20-G02*N M83513/20-G02*P M83513/20-G03*N M83513/20-G03*P M83513/21-H01*N M83513/21-H01*P M83513/21-H02*N M83515/21-H02*P MICRODOT Part No. MCK-**-P-100PRT3A MCK-**-B-100PRT3B MCK-**-P-100PRT3B MCK-**-B- 9SRT3 MCK-**-B- 15SRT3 MCK-**-B- 21SRT3 MCK-**-B- 25SRT3 MCK-**-B- 31SRT3 MCK-**-B- 37SRT3 MCK-**-P- 9SRT3 MCK-**-P- 15SRT3 MCK-**-P- 21SRT3 MCK-**-P- 25SRT3 MCK-**-P- 31SRT3 MCK-**-P- 37SRT3 MCK-**-B- 9SRT3A MCK-**-B- 15SRT3A MCK-**-B- 21SRT3A MCK-**-B- 25SRT3A MCK-**-B- 31SRT3A MCK-**-B- 37SRT3A MCK-**-P- 9SRT3A MCK-**-P- 15SRT3A MCK-**-P- 21SRT3A MCK-**-P- 25SRT3A MCK-**-P- 31SRT3A MCK-**-P- 37SRT3A MCK-**-B- 9SRT3B MCK-**-B- 15SRT3B MCK-**-B- 21SRT3B MCK-**-B- 25SRT3B MCK-**-B- 31SRT3B MCK-**-B- 37SRT3B MCK-**-P- 9SRT3B MCK-**-P- 15SRT3B MCK-**-P- 21SRT3B MCK-**-P- 25SRT3B MCK-**-P- 31SRT3B MCK-**-P- 37SRT3B MCK-**-B- 51SRT3 MCK-**-P- 51SRT3 MCK-**-B- 51SRT3A MCK-**-P- 51SRT3A MCK-**-B- 51SRT3B MCK-**-P- 51SRT3B MCK-**-B-100SRT3 MCK-**-P-100SRT3 MCK-**-B-100SRT3A MCK-**-P-100SRT3A Military Part No. M83513/21-H03*N M83513/21-H03*P M83513/22-A01*N M83513/22-B01*N M83513/22-C01*N M83513/22-D01*N M83513/22-E01*N M83513/22-F01*N M83513/22-A01*P M83513/22-B01*P M83513/22-C01*P M83513/22-D01*P M83513/22-E01*P M83513/22-F01*P M83513/22-A02*N M83513/22-B02*N M83513/22-C02*N M83513/22-D02*N M83513/22-E02*N M83513/22-F02*N M83513/22-A02*P M83513/22-B02*P M83513/22-C02*P M83513/22-D02*P M83513/22-E02*P M83513/22-F02*P M83513/22-A03*N M83513/22-B03*N M83513/22-C03*N M83513/22-D03*N M83513/22-E03*N M83513/22-F03*N M83513/22-A03*P M83513/22-B03*P M83513/22-C03*P M83513/22-D03*P M83513/22-E03*P M83513/22-F03*P M83513/23-G01*N M83513/23-G01*P M83513/23-G02*N M83513/23-G02*P M83513/23-G03*N M83513/23-G03*P M83513/24-H01*N M83513/24-H01*P M83513/24-H02*N M83515/24-H02*P M83513/24-H03*N MICRODOT Part No. MCK-**-B-100SRT3B MCK-**-P-100SRT3B MCK-**-B- 9PST1 MCK-**-B- 15PST1 MCK-**-B- 21PST1 MCK-**-B- 25PST1 MCK-**-B- 31PST1 MCK-**-B- 37PST1 MCK-**-P- 9PST1 MCK-**-P- 15PST1 MCK-**-P- 21PST1 MCK-**-P- 25PST1 MCK-**-P- 31PST1 MCK-**-P- 37PST1 MCK-**-B- 9PST1A MCK-**-B- 15PST1A MCK-**-B- 21PST1A MCK-**-B- 25PST1A MCK-**-B- 31PST1A MCK-**-B- 37PST1A MCK-**-P- 9PST1A MCK-**-P- 15PST1A MCK-**-P- 21PST1A MCK-**-P- 25PST1A MCK-**-P- 31PST1A MCK-**-P- 37PST1A MCK-**-B- 9PST1B MCK-**-B- 15PST1B MCK-**-B- 21PST1B MCK-**-B- 25PST1B MCK-**-B- 31PST1B MCK-**-B- 37PST1B MCK-**-P- 9PST1B MCK-**-P- 15PST1B MCK-**-P- 21PST1B MCK-**-P- 25PST1B MCK-**-P- 31PST1B MCK-**-P- 37PST1B MCK-**-B- 51PST1 MCK-**-P- 51PST1 MCK-**-B- 51PST1A MCK-**-P- 51PST1A MCK-**-B- 51PST1B MCK-**-P- 51PST1B MCK-**-B-100PST1 MCK-**-P-100PST1 MCK-**-B-100PST1A MCK-**-P-100PST1A MCK-**-B-100PST1B Military Part No. M83513/24-H03*P M83513/25-A01*N M83513/25-B01*N M83513/25-C01*N M83513/25-D01*N M83513/25-E01*N M83513/25-F01*N M83513/25-A01*P M83513/25-B01*P M83513/25-C01*P M83513/25-D01*P M83513/25-E01*P M83513/25-F01*P M83513/25-A02*N M83513/25-B02*N M83513/25-C02*N M83513/25-D02*N M83513/25-E02*N M83513/25-F02*N M83513/25-A02*P M83513/25-B02*P M83513/25-C02*P M83513/25-D02*P M83513/25-E02*P M83513/25-F02*P M83513/25-A03*N M83513/25-B03*N M83513/25-C03*N M83513/25-D03*N M83513/25-E03*N M83513/25-F03*N M83513/25-A03*P M83513/25-B03*P M83513/25-C03*P M83513/25-D03*P M83513/25-E03*P M83513/25-F03*P M83513/26-G01*N M83513/26-G01*P M83513/26-G02*N M83513/26-G02*P M83513/26-G03*N M83513/26-G03*P M83513/27-H01*N M83513/27-H01*P M83513/27-H02*N M83515/27-H02*P M83513/27-H03*N M83513/27-H03*P MICRODOT Part No. MCK-**-P-100PST1B MCK-**-B- 9SST1 MCK-**-B- 15SST1 MCK-**-B- 21SST1 MCK-**-B- 25SST1 MCK-**-B- 31SST1 MCK-**-B- 37SST1 MCK-**-P- 9SST1 MCK-**-P- 15SST1 MCK-**-P- 21SST1 MCK-**-P- 25SST1 MCK-**-P- 31SST1 MCK-**-P- 37SST1 MCK-**-B- 9SST1A MCK-**-B- 15SST1A MCK-**-B- 21SST1A MCK-**-B- 25SST1A MCK-**-B- 31SST1A MCK-**-B- 37SST1A MCK-**-P- 9SST1A MCK-**-P- 15SST1A MCK-**-P- 21SST1A MCK-**-P- 25SST1A MCK-**-P- 31SST1A MCK-**-P- 37SST1A MCK-**-B- 9SST1B MCK-**-B- 15SST1B MCK-**-B- 21SST1B MCK-**-B- 25SST1B MCK-**-B- 31SST1B MCK-**-B- 37SST1B MCK-**-P- 9SST1B MCK-**-P- 15SST1B MCK-**-P- 21SST1B MCK-**-P- 25SST1B MCK-**-P- 31SST1B MCK-**-P- 37SST1B MCK-**-B- 51SST1 MCK-**-P- 51SST1 MCK-**-B- 51SST1A MCK-**-P- 51SST1A MCK-**-B- 51SST1B MCK-**-P- 51SST1B MCK-**-B-100SST1 MCK-**-P-100SST1 MCK-**-B-100SST1A MCK-**-P-100SST1A MCK-**-B-100SST1B MCK-**-P-100SST1B 1 *C = Cadmium or N = Nickel (space applications only) **C2 = Cadmium or N1 = Nickel (space applications only) 35 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Microminiature D Connectors Engineering Notes 36 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Rectangular Connectors Introduction Product Facts n n n n Well-suited for external conditions Precise contact alignment with extremely low engaging forces Product offering consists of metal shell, plastic shell, panel mount, printed circuit board and strip connectors Rectangular Connectors n Designed for both military and commercial applications Metal shell connector promotes high durability and reliability 2 Twist Pin contact High Density Microminiature Connectors described in this catalog comprise a complete contact system which is adaptable to a numerous variety of form factors. Precise contact alignment, with extremely low engaging forces, results from the manner in which the Twist Pin contact system is packaged -- by constructing the male contact as a breathing helical spring, electrical contact is achieved at many points around the periphery of the pin bundle. Featured in this catalog is the twist pin contact line, which accommodates round wire and Flat Conductor Cable (FCC), Edgeboard Connectors. connectors in a strip (MCS) format as well as JACKMATE Connectors (MCJ Series) format for small package application requiring high reliability. Applications requiring frequent mating and disconnect call for the metal shell connector version. This style connector promotes high durability and reliability. Edgeboard applications are covered in this catalog with a special High Density Standard Module (HDSM) Connector as well as MIL-DTL-55302 (MCEM) Connectors. The high mating forces of these larger connectors are greatly reduced with the use of the low force twist pins and sockets which are standard for this product line. Designed for both military and commercial applications, this latest innovation is especially well-suited to use in external conditions. This catalog also features light-weight plastic 37 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Rectangular Connectors Twist Pin Contact Data Twist Pin -- 24 gauge Pin and Socket Contacts The contact spring member normally found in socket contacts has been eliminated by creating a breathing helical spring principle on the pin contact -- smaller, more durable contacts can be manufactured economically. Wire range 24-36 AWG solid & stranded. 38 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Rectangular Connectors MCE Series Plastic Shell Edgeboard Connectors Plastic Shell Edge Board Connectors Designed for commercial applications requiring frequent disconnect and connect, including data recorders and computers. Mother board connector can be ordered to fit any pattern on your circuit board. Units are available with contacts as few as 40 and as many as 110. Wire sizes 28 through 24, any type of plating or color coding, any kind of wire termination including wire wrap -- a high degree of flexibility for your military or commercial application. Rectangular Connectors This new connector features the proven twist pin contact with precision contact alignment with extremely low engaging forces. 40 Contacts 2 Two hexagonal polarizing keys can provide up to 36 different key combinations are supplied. Technical & Performance Data -- Twist Pin Plastic Shell Connectors Electrical Contact Resistance -- The average mated contact resistance is 4 milliohms, with a maximum value of 8 milliohms, using standard 24 AWG solid copper leads when measured directly behind the crimp joints of the mated pin and socket contacts. The average resistance value at 100 microvolts is 4.8 milliohms. Dielectric Withstanding Voltage -- 800 VAC RMS at sea level (600 for solder pots); 200 VAC RMS at 70,000 feet [21,336m] (150 for solder pots). Corrosion Resistance (Per MILSTD-202C, Method 101B, Condition B) -- Both mated and unmated samples do not exceed the maximum allowable contact resistance (8 milliohms) when subjected to the 48 hour salt spray test. Durability -- The contact resistance after 500 mating cycles is less than the maximum allowable, 8 milliohms. Insulation Resistance -- Greater than 5,000 megohms at room temperature. Maximum Current Carrying Capacity -- No. 24 contact 3 amperes. It must be recognized however, that all the wires to a connector will not carry their maximum current under all environmental conditions due to wire temperature. Mechanical Contact Engaging & Separation Forces -- 8.0 oz. max. [2.24N] (eng.), 0.5 oz. min.[.14N] (sep.) Environmental Temperature Range (Operating) -- -67F to 257F [-55 C to +125C]. Vibration (Per MIL-STD-202C, Method 204A, Condition D) -- No discontinuity in excess of 1 sec. during twelve 20 minute sweeps from 10 to 2000 CPS at .06 double amplitude or 20 G forces, whichever is less. Materials Insulator -- Liquid Crystal Polymer (LCP) per ASTM D5138 or Polyphenylene Sulfide per MIL-M-24519. Contacts -- Pin-contact: Copper alloy and beryllium copper alloy make up the complete construction. Socket contact: Copper alloy. Hardware -- Corrosion resistant stainless steel. Finishes Insulator -- None. Contacts -- Standard finish is 0.000050 [0.00127] gold over copper flash per MIL-G-45204, Type II. Hardware -- Passivated per QQ-P-35. 39 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Rectangular Connectors MCE Series Plastic Shell Edgeboard Connectors (Continued) Mother Board (Pin Side) .050 Typ. [1.27] .100 Typ. [2.54] A B .250 [6.35] .075 [1.91] C .225 [5.72] .075 Typ. [1.91] .150 Typ. [3.81] Detail B .050 [1.27] Polarization Key Location 2 Plcs. Pin Contact/ Lead Assembly A Insulator .250-.300 Typ. [6.35-7.62] Epoxy .325-.375 Typ. [8.26-9.53] A 25 AWG Copper Wire, Gold Plated, Solder Dipped B4 O .091-.098 [2.31-2.49] 2 Plcs. B3 B2 B1 B Section A-A #2-56 UNC-2B Thd. A1 A2 A3 Hex Polarizing Key 2 Supplied (Loose Packed) A4 Daughter Board (Socket Side) .250 [6.35] A .071-.076 [1.80-1.93] .100 Min. [2.54] Solder Dip Typ. O .093-.098 Thru .187 [2.36-2.49 Thru 4.75] (2 Plcs.) (Far ear only) O.187 Thru [4.75] 2 Plcs. (Near Ear Only) .030 Max. [.762] B .300 [7.62] A #24 AWG Copper Wire .250 [6.35] Max. Typ. .2 00.015 [5.08 .381] Typ. .450 [11.43] .2 75 [6.99] 2 Plcs. .180 [4.57] Epoxy .075 [1.91] .2 5 0 [6.35] Insulator A B4 B3 B2 B1 Polarization Key Location 2 Plcs. Socket Contact/ Lead Assembly Section A-A #2-56 UNC-2B Thd. A4 A3 A2 A1 .050 [1.27] Hex Polarizing Key 2 Supplied (Loose Packed) C 40 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Rectangular Connectors MCE Series Plastic Shell Edgeboard Connectors (Continued) Dimensions for .062 [1.57] PC Board A .010 [ .254] 1.750 44.45 1.850 46.99 2.750 69.85 3.500 88.90 No. of Contacts 40 44 80 110 B .005 [ .127] 1.500 38.10 1.600 40.64 2.500 63.50 3.250 82.55 C Basic .950 24.13 1.050 26.67 1.950 49.53 2.700 68.58 Notes: For PC Boards of different widths, consult Tyco Electronics. Rectangular Connectors 2 How To Specify S -- Solder pots 26 AWG max. Z -- Wire layout as shown on page 40. X -- Special, does not fit description below. MCE R1 40 P 6 L 4 0.5 Lead Length in Inches (min.) Connector Series Material Insulation Color or Finish R1 -- Liquid Crystal Polymer or 1 -- All white wire 2 -- All yellow wire 3 -- All gray wire Polyphenylene Sulfide 4 -- Gold plated 5 -- Tin dipped gold plated 6 -- Bare (unfinished) Layout 40, 44, 80, 110 Wire Type Contact Type *A -- Type E, 7 strand *D -- Type ET, 19 strand *B -- Type ET, 7 strand F -- 7 strand per MIL-22759/11 *C -- Type E, 19 strand (#28 AWG only) P -- Pin (Mother Board Connector) S -- Socket (Daughter Board Connector) 7 -- Color coded per MIL-STD-681, System 1 8 -- Special color code 9 -- Ten solid color repeating (starts with black) G -- 19 strand per MIL-22759/11 26 AWG, 24 AWG L -- Copper, solid Q -- Stranded per MIL-W-22759/33 *Per MIL-W-16878 Wire Size 4-24 AWG 5-25 AWG 6-26AWG 8-28 AWG 0-30 AWG Mounting -- Holes on the Daughter Board side can be modified. 41 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Rectangular Connectors MCEM Series Metal Shell Edgeboard Connectors Metal Shell Edge Board Connectors n n n n n n n Meets MIL-DTL-55302 performance requirements Layouts 128 and 184 are QPL to slash sheets 120, 121, 122 and 123 Connectors are available in 40, 44, 80, 110, 128, 152, and 184 positions Utilizes low force twist pins and our low force sockets. Mating forces in the 3 to 4 oz. [.83 to 1.11N] range per contact are typical with low force pin and low force socket Designed for surface mounting and through-theboard mounting Available termination n Mother board (pin side) -- cactus bend n Daughter board (socket side) -- coke bottle, right-angle bend to "A" or "B" side n Solder pots, and variety of other wire terminations for pin and socket connectors available at customer's request Two hexagonal polarizing keys (per MIL-DTL-55302 slash sheet 124) are provided. Jackscrew hardware is available. For programmable keying/ jacking modifications consult Tyco Electronics In addition to the plastic versions of the 2 piece edgeboard connectors, a metal shell assembly is designed and tooled. The metal shells are made of aluminum alloy per QQ-A591. The insert material is Diallyl phthalate, Polyphenylene sulfide (Ryton) or Liquid Crystal Polymer (LCP). The techni- cal and performance data is essentially the same as that shown for the MCDM Series on page 25. These are rugged, durable connectors and are ideal for use in areas of high density packaging and where frequent connect and disconnects are required. Designed initially for applications in airborne data recorders, computers and associated equipment in navigational systems. The mother board connector can be ordered to fit any pattern on the circuit board. The units can also be provided with contacts on .100 [2.54] spacing which results in .100 [2.54] grid pattern. Electrical Mechanical Materials and Finish Contact Resistance -- The average mated contact resistance is 4 milliohms, with a maximum value of 8 milliohms. The average resistance value at 100 microvolts is 4.8 milliohms. Dielectric Withstanding Voltage -- 800 VAC RMS at sea level (600 for solder pots); 200 VAC RMS at 70,000 feet [21,336m] (150 for solder pots). Durability -- Less than the maximum allowable, 8 milliohms after 500 mating cycles. Insulation Resistance -- Greater than 5,000 megohms at room ambient temperature. Maximum Current Carrying Capacity -- No. 24 contact 3 amperes. Contact Engaging & Separation Forces -- 5.0 oz. max. [1.39N] (eng.), 0.5 oz. min. [.14N] (sep.). Shells -- High grade aluminum alloy, electroless nickel plated per AMS 2404. Insulator -- Diallyl Phthalate per MILM-14, Type SDG-F (for 128 & 184); Polyphenylene Sulfide per MIL-M24519 (for 40, 44, 80, 110 & 152), or Liquid Crystal Polymer per ASTM D5138. Contacts -- Pin (low force): beryllium and OFHC copper, gold plated. Socket (low force): Copper alloy, gold plated. Hardware -- Corrosion resistant stainless steel passivated. Performance Data Environmental Temperature Range -- -67F to 302F [-55 C to +150C] for Diallyl Phthalate; -67F to 257F [-55 C to +125C] for Polyphenylene Sulfide. Vibration -- No discontinuity in excess of 1 sec. during twelve 20 minute sweeps from 10 to 2000 CPS at .06 double amplitude or 20 G forces, whichever is less. 42 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Rectangular Connectors MCEM Series Metal Shell Edgeboard Connectors (Continued) Mother Board (Pin Side) 40, 44, 80, 110 & 128 Positions Rectangular Connectors A #2-56 UNC-2B Thd. B .250 [6.35] .050 Typ. [1.27] Hex Polarizing Key 2 Supplied (Loose Packed) .050 [1.27] Polarizing Key Location 2 Plcs. Pin Contact/Lead Assy. Insulator Assy. .400 [10.16] A 2 Epoxy A O .091-.098 Thru [2.31-2.49] 2 Plcs. .050 Typ. [1.27] .100 Typ. [2.54] .260-.300 Typ. [6.60-7.62] 25 AWG Copper Wire, Gold Plated, Solder Dipped B3 B4 B2 B1 A4 A3 A1 A2 .325-.375 Typ. [8.26-9.53] .075 Typ. [1.91] .075 Typ. [1.91] Section A-A Dimensions for .062 [1.57] PC Board No. of Contacts 40 44 80 110 128 A .010 [ .254] 1.750 44.45 1.850 46.99 2.750 69.85 3.500 88.90 3.950 100.33 B .005 [ .127] 1.500 38.10 1.600 40.64 2.500 63.50 3.250 82.55 3.700 93.98 Note: For PC Boards of different widths, consult Tyco Electronics. Items in bold italic are qualified to MIL-DTL-55302. Configuration shown is per MIL-DTL-55302/120. 43 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Rectangular Connectors MCEM Series Metal Shell Edgeboard Connectors (Continued) Daughter Board (Socket Side) 40, 44, 80, 110 & 128 Positions A .071-.076 [1.80-1.93] 2 Plcs. B B O .091-.098 Thru Hole [2.31-2.49] 2 Plcs. C'Bore O .187 [4.75] x .045 [1.14] Deep (A Side Only) Section B-B .030 Max. [0.76] .150 Min. [3.81] Solder Dip Typ. 24 AWG Copper Wire, Gold Plated .250 Max. [6.35] .200 .015 [5.08 .381] B .330 [8.38] 2 Plcs. .275 [6.99] .180 [4.57] 2 Plcs. .060 3 Plcs. [1.52] O .187 Thru 1 Wall [4.75] .250 [6.35] .050 Typ. [1.27] .125 2 Plcs. [3.18] .071 Min. [1.80] at B A Epoxy Insulator Assy. Skt. Contact/ Lead Assy. .250 2 Plcs. [6.35] Retaining Pin Holes 4 Plcs. .050 [1.27] .050 Typ. [1.27] Section A-A A B2 B1 A1 Polarizing Key Location 2 Plcs. A2 Polarizing Key 2 Supplied (Loose Packed) Note: Board thickness .070 [1.78] Max. Retaining Pin 4 Supplied (Loose Packed) S -- Solder pots for 26 AWG max. How To Specify Z -- Wire layout as illustrated. X -- Special, does not fit description below. MCE M1 128 L 6 L 4 0.5 Lead Length in Inches (min.) Connector Series Material Insulation Color or Finish M1 -- Metal Shell 1 -- All white wire 2 -- All yellow wire 3 -- All gray wire Layout 40, 44, 80, 110, 128, 152, 184 4 -- Gold plated 7 -- Color coded per 5 -- Tin dipped gold plated MIL-STD-681, System 1 6 -- Bare (unfinished) 8 -- Special color code 9 -- Ten solid color repeating (starts with black) Wire Type Contact Type L -- Low Force Pin (Mother Board Connector) SL -- Low Force Socket* (Daughter Board Connector) *A -- Type E, 7 strand *B -- Type ET, 7 strand *C -- Type E, 19 strand *D -- Type ET, 19 strand F -- 7 strand per MIL-C-22759/11 (#28 AWG only) G -- 19 strand per MIL-C-22759/11 26 AWG, 24 AWG L -- Copper, solid Q -- Stranded per MIL-W-22759/33 *Per MIL-W-16878 Wire Size 4-24 AWG Items in bold italic are qualified to MIL-DTL-55302. Configuration shown is per MIL-DTL-55302/121. 5-25 AWG 6-26 AWG 8-28 AWG 0-30 AWG Polarization - Hexagonal hardware is supplied with connector. Mounting -- Standard mounting holes are shown. Consult Tyco Electronics for modifications. 44 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Rectangular Connectors MCEM Series Metal Shell Edgeboard Connectors (Continued) Mother Board (Pin Side) 152 & 184 Positions A Polarizing Key Location 2 Plcs. B #2-56 UNC-2B Thd. B/2 .075 [1.91] A B .343 [8.71] D 2 Plcs .500 [1.27] Hex Polarizing Key 2 Supplied (Loose Packed) .050 Typ. [1.27] Pin Contact/ Lead Assembly C A Rectangular Connectors .400 [10.16] .270 [6.86] Insulator Subassembly Retaining Pin Hole 4 Plcs. 25 AWG Copper Wire, Gold Plated, Solder Dipped A .250 [6.35] B3 B4 B2 B1 A4 A3 A1 A2 .250-.300 Typ. [6.35-7.62] .325-.375 Typ. A1 [8.26-9.53] A2 B1 B2 .075 Typ. [1.91] .075 [1.91] Typ. 2 Section A-A Daughter Board (Socket Side) 152 & 184 Positions O .091-.098 [2.31-2.49] Thru C'Bore O .187 [4.75] x .045 [1.14], 3 Plcs., (A Side Only) .343 [8.71] .125 2 Plcs. [3.18] .060 [1.52] 3 Plcs. A B B .071 Min. [1.80] O .187 Thru [4.75] 3 Plcs. (B Side Only) Section B-B B .250 2 Plcs. [6.35] C .242 [6.15] .075 [1.91] Typ. B/2 2 Plcs. D .500 [12.70] .700 [17.78] A Retaining Pin Hole 4 Plcs. A3 152 184 A .010 [ .254] 4.550 115.57 5.800 147.32 Epoxy Insulator Assy. A4 No. of Contacts .150 Min. [3.81] Typ. Solder Dip .053 [1.35] Min. at B B3 B4 .050 Typ. [1.27] .200 Typ. [5.08] .250 Max. [6.35] Typ. A Polarizing Key Locations 2 Plcs. 24 AWG Copper Wire, Gold Plated .030 Max. [.762] B .005 [ .127] 4.300 109.22 5.550 140.97 B2 B1 Section A-A Skt. Contact/ Lead Assy. A1 A2 Retaining Pin 4 Supplied Polarizing Key (Loose Packed) 2 Supplied (Loose Packed) C Basic D Basic 4.750 120.65 5.000 127.00 1.850 46.99 2.250 57.15 45 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Rectangular Connectors JACKMATE MCJ(M) Series Plastic (Metal) Shell Center Jackscrew Connectors JACKMATE Connectors are the first Twist Pin contact assemblies designed to accommodate center jackscrews that provide jacking action when mating or unmating the connectors. Although the units were initially developed for high density cord-to-cord or in-line applications, either plug or receptacle can be adapted to a PC board. The jacking hardware consist of a threaded bushing and a captivated jackscrew which are made of corrosion resistant stainless steel and are molded into the JACKMATE Connector Insulator. The twist pin contacts are on .050 [1.27] center-to- center linear spacing and contact terminations are available in solid wire or stranded wire. There is a high degree of flexibility with this JACKMATE connector design for commercial or military applications. Available om MCJ(M) Series Plastic (Metal) Shells. JACKMATE MCJ Series Plastic Shell Center Jackscrew Connectors JACKMATE Technical & Performance Data for Plastic Shell Electrical Contact Resistance -- The average mated contact resistance is 4 milliohms, with a maximum value of 8 milliohms, using standard 24 AWG solid copper leads when measured directly behind the crimp joints of the mated pin and socket contacts. The average resistance value at 100 microvolts is 4.8 milliohms. Dielectric Withstanding Voltage (60 Hz rms room temperature) -- Solder Pots: 600 VAC at sea level; 150 VAC at 70,000 feet [21,336m] Wire Terminations: 750 VAC at sea level; 200 VAC at 70,000 feet [21,336m]. Corrosion Resistance (Per MIL-STD202C, Method 101B, Condition B) -- Both mated and unmated samples do not exceed the maximum allowable contact resistance (8 milliohms) when subjected to the 48 hour salt spray test. Durability -- The contact resistance after 500 mating cycles is less than the maximum allowable, 8 milliohms. Insulation Resistance -- Greater than 5,000 megohms at room temperature for the materials listed under "Materials". Maximum Current Carrying Capacity -- No. 24 contact 3 amperes. It must be recognized, however, that all the wires to a connector will not carry their maximum current under all environmental conditions due to wire temperature. Mechanical Materials Contact Engaging & Separation Forces -- 8.0 oz. max. [2.22N] (eng.), 0.5 oz. min. [.14N] (sep.). Insulator -- Glass filled Nylon Type 6. Contacts -- Pin contact: copper alloy and beryllium copper alloy make up the complete construction; Socket contact: copper alloy. Hardware -- Corrosive resistant stainless steel. Environmental Temperature Range (Operating) -- -67F to 257F [-55 C to 125C]. Vibration (Per MIL-STD-202C, Method 204-A, Condition D) -- No discontinuity in excess of 1 sec. during twelve 20 minute sweeps from 10 to 2000 CPS at .06 double amplitude or 20 G forces, whichever is less. Finishes Contacts -- Standard finish is 0.000050 [0.00127] gold over copper flash per MIL-G-45204, Type II. Hardware -- Passivated Per QQ-P-35. 10 & 14 Contact Layout .165 [4.19] .165 [4.19] .075 [1.91] .285 [7.24] .050 Typ. [1.27] .570 [14.00] .235 [5.97] .470 [11.94] .075 [1.91] .050 Typ. [1.27] Guide Pin 2 Plcs. Bushing .300 [7.62] Jackscrew (.050 hex wrench req'd to turn screw) 30 30 14 Layout .120 [3.05] 10 Layout Receptacle Plug 46 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Rectangular Connectors JACKMATE MCJ Series Plastic Shell Center Jackscrew Connectors (Continued) 26, 38 & 46 Contact Layout .075 [1.91] .165 [4.19] .050 [1.27] Typ. .635 [16.13] .300 [7.62] .165 [4.19] .165 [4.19] .585 [14.86] 1.270 [32.26] .120 [3.05] Jackscrew #0-80 UNF-2A Thd. .438 [11.13] 1.170 [29.72] .870 [22.10] Guide Pin 38 Layout 26 Layout .285 [7.24] .050 Typ. [1.27] Receptacle .120 [3.05] .050 Typ. [1.27] Section A-A Plug .300 [7.62] Bushing #0-80 UNF-2B Thd. .610 [15.49] Bushing #0-80 UNF-2B Thd. Rectangular Connectors 42 Layout A A .305 [7.75] Jackscrew #0-80 UNF-2A Thd. Guide Pin 46 Layout Receptacle 2 Plug How To Specify S Solder pot for 26 AWG maximum stranded wire. X Special, does not fit description below. MCJ B2 10 P 4 L 4 0.5 Lead Length in Inches (min.) Connector Series Shell Material Insulation Color or Finish B2 Glass filled nylon, type 6/10, blue 1 All white wire 2 All yellow wire 3 All gray wire Layout (Positions) 4 Gold plated 5 Tin dipped gold plated 6 Bare (unfinished) 10, 14, 26, 38, 42, 46 7 Color coded per MIL-STD-681, System 1 8 Special color code 9 Ten solid color repeating (starts with black) Wire Type Contact Type *A Type E, 7 strand *B Type ET, 7 strand *C Type E, 19 strand P Pin S Socket *D Type ET, 19 strand F 7 strand per MIL-C-22759/11 (#28 AWG only) G 19 strand per MIL-C-22759/11 26 AWG, 24 AWG L Copper, solid Q Stranded per MIL-W-22759/33 *Per MIL-W-16878 Wire Size 4--24 AWG 5--25 AWG 6--26 AWG 8--28 AWG 0--30 AWG Contact Arrangement as Viewed from the Engaging Face of the Pin Side 21 38 1 20 14 Guide Pin Guide Pin 10 15 26 Guide Pin Guide Pin 38 Positions 46 26 Positions Guide Pin 10 Positions 20 1 6 1 36 1 6 1 Guide Pin 7 20 27 11 1 7 14 21 Guide Pin Guide Pin Guide Pin 46 Positions 14 Positions 42 42 Positions Guide pin locations illustrated are for standards configuration only. Any location is available. Guide pins are supplied in socket connectors and blank cavities are in pin connector. 47 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Rectangular Connectors JACKMATE MCJM Series Metal Shell Center Jackscrew Connectors Technical and Performance Data for Metal Shell Electrical Contact Resistance -- The average mated contact resistance is 4 milliohms, with a maximum value of 8 milliohms, using standard 24 AWG solid copper leads when measured directly behind the crimp joints of the mated pin and socket contacts. The average resistance value at 100 microvolts is 4.8 milliohms. Dielectric Withstanding Voltage (60 Hz rms room temperature) -- Solder Pots: 600 VAC at sea level; 150 VAC at 70,000 feet [21,336m]. Wire Terminations: 750 VAC at sea level; 200 VAC at 70,000 feet [21,336m]. Corrosion Resistance (Per MILSTD-202C, Method 101B, Condition B) -- Both mated and unmated samples do not exceed the maximum allowable contact resistance (8 milliohms) when subjected to the 48 hour salt spray test. Durability -- The contact resistance after 500 mating cycles is less than the maximum allowable, 8 milliohms. Insulation Resistance -- Greater than 5,000 megohms at room temperature for the materials listed under "Materials". Maximum Current Carrying Capacity -- No. 24 contact 3 amperes. It must be recognized, however, that all the wires to a connector will not carry their maximum current under all environmental conditions due to wire temperature. Mechanical Contact Engaging & Separation Forces -- 8.0 oz. max. [2.22N] (eng.), 0.5 oz. min.[.14N] (sep.). Environmental Temperature Range (Operating) -- -67F to 302F [-55C to 150C] for Diallyl Phthalate. Vibration (Per MIL-STD-202C, Method 204-A, Condition D) -- No discontinuity in excess of 1 sec. during twelve 20 minute sweeps from 10 to 2000 CPS at .06 double amplitude or 20 G forces, whichever is less. Materials Insulator -- Diallyl Phthalate per MILM-14, Type SDG-F. Contacts -- Pin contact: copper alloy and beryllium copper alloy make up the complete construction; Socket contact: copper alloy. Body Shells -- Pin body shell: stainless steel, Types 304, Condition A per QQ-S-766; Socket body shell: aluminum alloy per QQ-A-591, A-380 alloy. Hardware -- Corrosion resistant stainless steel. Finishes Contacts -- Standard finish is 0.000050 [0.00127] gold over copper flash per MIL-G-45204, Type II. Body Shells -- Pin body shell: passivated per MIL-F-14072 (E-300); Socket body shell: electroless nickel per AMS 204, Class 3, except thickness is 0.001/0.0015 [0.025/0.038]. Hardware -- Passivated per QQ-P-35. Note: Insulators are molded into their metal shells -- No bonded joint is used. *Standard material used unless otherwise specified. Plug (Pin Side) A Polarization Shell Type M1 B Polarization Jackscrew 2-56 UNC-2B Thd. Contact Pin .199 .300 [5.05] [7.62] Shell Insert .180 [4.57] .046 Rad. [1.17] Typ. #10 .187 [4.75] .078 Hex [1.98] Socket #1 .350 [8.89] .125 Rad. [3.18] Typ. #48 #41 .830 [21.08] Jackscrew 48 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Rectangular Connectors JACKMATE MCJM Series Metal Shell Center Jackscrew Connectors (Continued) Receptacle (Socket Side) Shell Type M1 Shell Type M2 .830 [21.08] .125 Sq. [3.18] .050 BSC [1.27] Typ. A Polarization Bushing #41 .125 Rad. [3.18] 2 Plcs. #48 #48 #41 .030 Rad. [0.76] 4 Plcs. #1 .160 .005 2 Plcs. [4.06 0.13] #10 .046 Rad. [1.17] 2 Plcs. Rectangular Connectors .050 2 Plcs. [1.27] .010 .355 +- .005 0.25 [9.02]+- 0.13 .050 BSC [1.27] Typ. #10 #1 B Polarization Interfacial Seal Silicon Rubber Bushing Stainless Steel 2-56 UNC-2B Thd. .094 Rad. [2.39] 2 Plcs. Full Rad. Typ. .094 .005 2 Plcs. [2.39 0.13] .310 [7.87] .070 .005 [1.78 0.13] 2 Plcs. 2 .108 .005 2 Plcs. [2.74 0.13] Insert .200 .005 [5.08 0.13] 2 Plcs. Contact Skt. How To Specify S Solder pot for 26 AWG maximum stranded wire. X Special, does not fit description below. MCJ JACKMATE Connector Series M1 A 48 P 4 L 4 0.5 Lead Length in Inches (min.) Shell Material Insulation Color or Finish M1 Metal Shell (Standard) M2 Metal Shell (Special receptacles only) 1 All white wire 2 All yellow wire 3 All gray wire 4 Gold plated 5 Tin dipped gold plated 6 Bare (unfinished) Polarizing Position A, B 7 Color coded per MIL-STD-681, System 1 8 Special color code 9 Ten solid color repeating (starts with black) Wire Type *A Type E, 7 strand *B Type ET, 7 strand *C Type E, 19 strand Layout (Positions) 48 Contact Type *D Type ET, 19 strand F 7 strand per MIL-C-22759/11 (#28 AWG only) G 19 strand per MIL-C-22759/11 26 AWG, 24 AWG L Copper, solid Q Stranded per MIL-W-22759/33 *Per MIL-W-16878 P Pin S Socket Wire Size 4--24 AWG 5--25 AWG 6--26 AWG 8--28 AWG 0--30 AWG 49 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Rectangular Connectors MCS Series Strip Connectors Strip Connectors MCS Plastic Strip C C .050 Typ. [1.27] .283 [7.19] A Lead Epoxy Skt. Contact Insulator Insulator Epoxy .070 [1.78] Pin Contact .070 [1.78] C Max. .070 [1.78] .120 [3.05] .170 [4.32] .220 [5.59] .270 [6.86] .320 [8.13] .420 [10.67] .420 [10.67] .470 [11.94] .520 [13.21] .570 [14.48] .620 [15.75] .670 [17.02] .720 [18.29] .770 [19.56] .820 [20.83] .870 [22.10] .920 [23.37] .970 [24.64] 1.020 [25.91] 1.070 [27.18] 1.120 [28.45] 1.170 [29.72] 1.220 [30.99] 1.270 [32.26] 1.320 [33.53] 1.370 [34.80] 1.420 [36.07] 1.470 [37.34] 1.520 [38.61] .035 Max. [.889] For Solid Wire .125 Max. [3.18] For Insulated Wire A Section A-A Part No. By Size MCSAR*-1** MCSAR*-2** MCSAR*-3** MCSAR*-4** MCSAR*-5** MCSAR*-6** MCSAR*-7** MCSAR*-8** MCSAR*-9** MCSAR*-10** MCSAR*-11** MCSAR*-12** MCSAR*-13** MCSAR*-14** MCSAR*-15** MCSAR*-16** MCSAR*-17** MCSAR*-18** MCSAR*-19** MCSAR*-20** MCSAR*-21** MCSAR*-22** MCSAR*-23** MCSAR*-24** MCSAR*-25** MCSAR*-26** MCSAR*-27** MCSAR*-28** MCSAR*-29** MCSAR*-30** .050 Typ. [1.27] .100 [2.54] B Plug Part No. By Size MCSAR*-31** MCSAR*-32** MCSAR*-33** MCSAR*-34** MCSAR*-35** MCSAR*-36** MCSAR*-37** MCSAR*-38** MCSAR*-39** MCSAR*-40** MCSAR*-41** MCSAR*-42** MCSAR*-43** MCSAR*-44** MCSAR*-45** MCSAR*-46** MCSAR*-47** MCSAR*-48** MCSAR*-49** MCSAR*-50** MCSAR*-51** MCSAR*-52** MCSAR*-53** MCSAR*-54** MCSAR*-55** MCSAR*-56** MCSAR*-57** MCSAR*-58** MCSAR*-59** MCSAR*-60** C Max. 1.570 [39.88] 1.620 [41.15] 1.670 [42.42] 1.720 [43.69] 1.770 [44.96] 1.820 [46.23] 1.870 [47.50] 1.920 [48.77] 1.970 [50.04] 2.020 [51.31] 2.070 [52.58] 2.120 [53.85] 2.170 [55.12] 2.220 [56.39] 2.270 [57.66] 2.320 [58.93] 2.370 [60.20] 2.420 [61.47] 2.470 [62.74] 2.520 [64.01] 2.570 [65.28] 2.620 [66.55] 2.670 [67.82] 2.720 [69.09] 2.770 [70.36] 2.820 [71.63] 2.870 [72.90] 2.920 [74.17] 2.970 [75.44] 3.020 [76.71] Lead B Section B-B Receptacle .035 Max. [.889] For Solid Wire .125 Max. [3.18] For Insulated Wire Part No. By Size MCSAR*-61** MCSAR*-62** MCSAR*-63** MCSAR*-64** MCSAR*-65** MCSAR*-66** MCSAR*-67** MCSAR*-68** MCSAR*-69** MCSAR*-70** MCSAR*-71** MCSAR*-72** MCSAR*-73** MCSAR*-74** MCSAR*-75** MCSAR*-76** MCSAR*-77** MCSAR*-78** MCSAR*-79** MCSAR*-80** MCSAR*-81** MCSAR*-82** MCSAR*-83** MCSAR*-84** MCSAR*-85** MCSAR*-86** MCSAR*-87** MCSAR*-88** MCSAR*-89** MCSAR*-90** C Max. 3.070 [77.98] 3.120 [79.25] 3.170 [80.52] 3.220 [81.79] 3.270 [83.06] 3.320 [84.33] 3.370 [85.60] 3.420 [86.87] 3.470 [88.14] 3.520 [89.41] 3.570 [90.68] 3.620 [91.95] 3.670 [93.22] 3.720 [94.49] 3.770 [95.76] 3.820 [97.03] 3.870 [98.30] 3.920 [99.57] 3.970 [100.84] 4.020 [102.11] 4.070 [103.38] 4.120 [104.65] 4.170 [105.92] 4.220 [107.19] 4.270 [108.46] 4.320 [109.73] 4.370 [111.00] 4.420 [112.27] 4.470 [113.54] 4.520 [114.81] Part No. By Size MCSAR*-91** MCSAR*-92** MCSAR*-93** MCSAR*-94** MCSAR*-95** MCSAR*-96* MCSAR*-97** MCSAR*-98** MCSAR*-99** MCSAR*-100** MCSAR*-101** MCSAR*-102** MCSAR*-103** MCSAR*-104** MCSAR*-105** MCSAR*-106** MCSAR*-107** MCSAR*-108** MCSAR*-109** MCSAR*-110** MCSAR*-111** MCSAR*-112** MCSAR*-113** MCSAR*-114** MCSAR*-115** MCSAR*-116** MCSAR*-117** MCSAR*-118** MCSAR*-119** MCSAR*-120** C Max. 4.570 [116.08] 4.620 [117.35] 4.670 [118.62] 4.720 [119.89] 4.770 [121.16] 4.820 [122.43] 4.870 [123.70] 4.920 [124.97] 4.970 [126.24] 5.020 [127.51] 5.070 [128.78] 5.120 [130.05] 5.170 [131.32] 5.220 [132.59] 5.270 [133.86] 5.320 [135.13] 5.370 [136.40] 5.420 [137.67] 5.470 [138.94] 5.520 [140.21] 5.570 [141.48] 5.620 [142.75] 5.670 [144.02] 5.720 [145.29] 5.770 [146.56] 5.820 [147.83] 5.870 [149.10] 5.920 [150.37] 5.970 [151.64] 6.020 [152.91] S -- Solder pot for 26 AWG maximum stranded wire. How To Specify X -- Special, does not fit description below. MCS AR 2 26 P 6 A 1 18.0 Lead Length in Inches (min.) Connector Series Insulator Type and Material Insulation Color or Finish AR -- Polyphenylene Sulfide per MIL-M-24519 1 -- All white wire 2 -- All yellow wire 3 -- All gray wire or Liquid Crystal Polymer per ASTM D5138 Contact Locations 1 -- Contact in every cavity 2 -- Contact in every other cavity 1, 3, 5... 3 -- Contact in every cavity except guide pin cavity in each end cavity 4 -- Contact in every other cavity 2, 4, 6... and guide pin in each end cavity X -- Other than above Standard Polarization Guide pins are in socket connectors. Blank cavities are in pin connectors. Number of Cavities (120 Max.) 4 -- Gold plated 5 -- Tinned 6 -- Bare (unfinished) 7 -- Color coded per MIL-STD-681, System 1 8 -- Special color code 9 -- Ten solid color repeating (starts with black) Wire Type *A -- Type E, 7 strand *B -- Type ET, 7 strand *C -- Type E, 19 strand *D -- Type ET, 19 strand F -- 7 strand per MIL-22759/11 (#28 AWG only) G -- 19 strand per MIL-22759/11 26 AWG, 24 AWG M -- Copper, solid Q -- Stranded per MIL-W-22759/33 *Per MIL-W-16878 Wire Size 4-24 AWG 5-25 AWG 6-26 AWG 8-28 AWG 0-30 AWG Contact Type P -- Pin S -- Socket 50 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Rectangular Connectors High Density Standard Module (HDSM) Connectors Features n n n n n n n n n n n n Basic design offers 38, 78, 120, 152, 200, 304, and 400 contact designs High reliability twist pin and socket per MIL-DTL-83513 and MIL-DTL-55302 Connector permits lateral movement of daughter board to accommodate clamping of the heatsink Rectangular Connectors n Designed for surface mounting on both daughter board and mother board for increased circuit density Plated through-hole mounting available Available with flying leads Extender card option available Typical mating force for 304 contacts is 38 pounds Designed to withstand vapor phase soldering Two rotatable (six position) polarizing keys are provided accommodating 36 possible combinations Jackscrew hardware available; consult Tyco Electronics Different modular inserts may be specified to include coax (Pixi/Con), fiber optic or other special contacts Inserts may be partially or fully loaded and installed in the connector shell in various configurations The MICRODOT HDSM connector is designed for 4 row .050 [1.27] pitch density with a special low force twist pin that meets all requirements of MILDTL-55302 and MIL-DTL83513. This high density connector allows the use of construction to double the packaging density with surface mount capability. 2 Performance Data Summary Electrical Materials and Finishes Contacts -- Pin 24 AWG twist pin, Socket #24 AWG, Wire range 24 AWG to 32 AWG solid and stranded. Contact Resistance (voltage drop) -- 25 millivolts max. at 3 amps, 25 3 C. Current Rating -- 3 amps max. per contact Dielectric Withstanding Voltage -- Volts RMS 60 Hz at room ambient: 600 V for solder pots at sea level. 150 V for solder pots at 70,000 ft. [21,336m] 500 V for wire terminations at sea level. 200 V for wire terminations at 70,000 ft. Insulation Resistance -- 5,000 megohms min. at room ambient. Magnetic Permeability -- 2 m max. Contacts -- Copper alloy plated with .000050 [0.00127] gold over copper flash per MIL-G-45204, Type II. Metal Shell -- Insulator -- Liquid Crystal Polymer (LCP) per ASTM D5138 or Polyphenylene Sulfide per MIL-M-24519 Body Shell -- Aluminum alloy plated Nickel, electroless per MIL-C-26074. Mechanical Contact Spacing -- .050 [1.27] centers Contact Engagement & Separation -- 5.0 oz max. [1.39N] (eng.) 0.5 oz. min. [.14N] 3.5 oz. typ. [.97N] (sep.) force. Environmental Temperature Range -- -67F to 257F [-55 C to +125 C]. Vibration -- No discontinuity in excess of 1 micro sec. when tested in accordance with MIL-STD-1344, Method 2005, test Condition IV. Insulator Retention -- Inserts will withstand a 50 lb. per square inch load in either direction. Shock -- No discontinuity in excess of 1 micro sec. when tested in accordance with MIL-STD-1344, Method 2004, test Condition E. Durability -- No mechanical or electrical defects detrimental to the function of the connectors after 500 cycles of mating and unmating. (Caution: Mating force increases during durability cycling may be noted). Humidity -- After exposure to humidity as specified by MIL-STD-1344, Method 1002, Type II, IR shall be 1 megohm min. immediately following step 7a of Method 1002 and 1000 megohms min. after 24 hours of conditioning per Method 1002. Salt Spray -- Connectors shall meet the performance requirements of contact resistance, mating and unmating forces, and contact retention after being subjected to the 48-hour 5% solution salt spray test per MIL-STD-1344, Method 1001, Condition B. Crimp Termination Tensile Strength -- *Unassembled contacts with crimped stranded wire terminations. Wires will not pull out of contacts when the following axial loads are applied: 24 AWG, 5 lbs., 26 AWG, 4 lbs., 28 AWG, 3 lbs. 51 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Rectangular Connectors High Density Standard Module (HDSM) Connectors (Continued) A B .025 Typ. [0.64] .050 Typ. [1.27] A B .050 [1.27] .150 [3.81] .050 Typ. [1.27] .360 [9.14] 38 & 78 Position Plug 120, 152 & 200 Position Plug Mtg. Nut/Polarizing Key (Customer Installed) 2 Supplied (Packed Loose) Socket Side Flat Screw 2-56 UNC-2A Thd. Receptacle Polarizing Key 2-56 UNC-2B Thd. Plug Polarizing Key 2-56 UNC-2B Thd. Flat Screw 2-56 UNC-2A Thd. A Pin Contact A A1 .290 [7.34] .165 [4.19] Pin Side Keying Hardware C Ref. A15 (19) (25) A16 (20) (26) B16 (20) (26) B15 (19) (25) D .050 .050 [.127] [.127] A30 (38) (50) B30 (38) (50) .025 A1 [0.64] B1 A9 (19) B10 (20) } End Cav. A1 Near Side Marked As Shown End Cav. D1 Far Side Insulator A A1 .290 Ref. [7.37] .505 [12.83] .350 Min. [8.89] Ref. Housing Lead Organizer .350 Min. [8.89] 2-56 UNC-2B Thd. x .125 [3.17] DP 28 AWG Wire Solder Dipped O.010 [0.25] (All Leads) B1 Section A-A .200 [5.08] .300 .490 Max. [7.62] [12.50] C10 (20) D9 (19) C15 (19) (25) C16 (20) (26) C1 C30 (38) (50) D1 D30 (38) (50) C D16 (20) (26) C1 D1 D15 (19) (25) C (38 & 78) (120, 152 & 200) .025 Typ. [0.64] .050 Typ. [1.27] A B .050 [1.27] 2 Plcs. .050 [1.27] .150 [3.81] .250 [6.35] D C B A .360 [9.14] Mtg. Nut/Polarizing Key 304 & 400 Position Plug (Customer To Install) 2 Supplied (Packed Loose) 'A76' (304) 'A100' (400) Near Side Marking 'D76' (304) 'D100' (400) Far Side Marking 'A1' Near Side Marking 'D1' Far Side Marking .290 .290 [7.34] Ref. [7.37] A D Ref. CL .125 Ref. [3.18] D75(99) C75(99) D76(100) B76(100) A58(76) B58(76) A59(77) B59(77) A57(75) B57(75) A56(74) B56(74) B39(51) A39(51) B40(52) A40(52) Standoff, 2-56 UNC-2B Thd. x .125 [3.17] Min. Thd. .250 [6.35] B38(50) A38(50) B37(49) A37(49) A20(26) B20(26) A21(27) B21(27) A19(25) B19(25) A18(24) B18(24) Housing Lead Organizer .165 [4.19] .050 Ref. [1.27] C (2 Plcs.) Insulator .505 [12.83] A1 A*** Pin Contact A 2-56 UNC-2B Thd. x .125 [3.17] DP 28 AWG Wire Solder Dipped fl.010 [0.25] (All Leads) B3 A3 B4 A4 A2 B2 A1 B1 .060 Thick [1.52] .062 [1.58] .350 [8.89] Min. Section A-A .220 [5.59] .590 .340 .460 Max. [8.64] [11.68] [14.99] C76(100) D76(100) C75(99) D75(99) .050 Typ. [1.27] .100 Typ. [2.54] C59(77) D59(77) C58(76) D58(76) .025 Typ. [0.64] .075 Typ. [1.91] C56(74) D40(52) D56(74) C40(52) C57(75) D39(51) D57(75) C39(51) D Typ. .050 2 Plcs. [1.27] D37(49) C37(49) D38(50) C38(50) C21(27) D21(27) C20(26) D20(26) C18(24) D18(24) C19(25) D19(25) D4 C4 D3 C3 C1 D1 C2 D2 .100 [2.54] Size 304 & 400 (Terminal Ident In Parentheses Is For Size 400) 52 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Rectangular Connectors High Density Standard Module (HDSM) Connectors (Continued) C D9(19) C10(20) B10(20) A9(19) .220 [5.59] D1 C1 .226 Typ. [5.74] C B1 A1 .195 [4.95] B1 A1 (120, 152 & 200) H Ref. Dim. 32 AWG, Solder Dipped G Gage Dim. I.D. Of Bushing O .132 O .062-.064 [3.35] [1.57-1.61] Full Radius Typ. .370 [9.40] D Ref. .050 [1.27] B A .695 .545 [17.65] [13.84] .645 [16.38] B A A9(38)A19(76)A30(120) A38(152)A50(200) Near Side Marking D9(38)D19(76)D30(120) D38(152)D50(200) Far Side Marking Section B-B .025 [0.64] Typ. .050 Typ. [1.27] A B 38 & 78 Position Receptacle CL Of Radius Of Leads .050 .188 .015 Typ. [1.27] [4.78 0.38] .348 [8.84] A1 Near Side Marking D1 Far Side Marking 120, 152 & 200 Position Receptacle Insulator Section A-A B C .195 Ref. [4.95] .025 Typ. [0.64] .150 [3.81] .050 [1.27] Housing Socket Contact Polarizing Key, 2 Supplied 2-56 UNC-2B Thd. (Packed Loose) A B .050 Radius [1.27] Typ. "Break Away" Notch (All Leads) CL Of Mtg. Hole Rectangular Connectors Torlon Bushing (4 Rqd) Typ. At .545 [13.84] Dim. C Ref. .025 [0.64] F Free State O .008 M [.2.03] A M .160 [4.06] (38 & 78) E -A- Flat Screw, 2 Supplied 2-56 UNC-2A Thd. (Packed Loose) D1 C1 D 2 Size 38 & 78 .050 [1.27] D Typ. .025 Typ. [0.64] .360 [9.14] .050 [1.27] .195 Ref. [4.95] C B Size 120, 152 & 200 Recommended PCB Footprint Pattern Flat Head Screw (2 Plcs.) 2-56 UNC-2A Thd. (Packed Loose, Customer To Install) B B/2 (2 Plcs.) .360 [9.14] C1 D1 H Ref. Dim. G Gage Dim. 32 AWG, Solder Dipped F Free State O .008 M [.2.03] A M (Typ.) At .545 [13.84] Dim. .025 Typ. [0.64] B .250 [6.35] .160 Typ. [4.06] Full Radius Typ. C (2 Plcs.) D (4 Plcs.) .050 Typ. [1.27] A .226 B1 A1 [5.74] .370 [9.40] .645 .545 [16.38] .695 [17.65] [13.84] B A76(304) A100(400) Near Side Marking D76(304) D100(400) Far Side Marking .250 [6.35] .050 [1.27] 2 Plcs. A .025 Typ. [0.64] .050 Radius [1.27] Typ. "Break Away" Notch (All Leads) CL Of Mtg. Hole CL Of Radius Of Leads .050 .188 .015 Typ. [1.27] [4.78 0.38] .348 [8.84] A1 Near Side Marking D1 Far Side Marking Housing Socket Contact .050 Typ. [1.27] Insulator Section A-A B Polarizing Key (2 Plcs.) (Packed Loose, Customer To Install) B A .050 [1.27] .150 [3.81] .018 [0.46] .035 [0.89] 1/2 B (2 Plcs.) .195 [4.95] D Typ. 2 Plcs. C (2 Plcs.) Size 304 & 400 Recommended PCB Footprint Pattern 53 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Rectangular Connectors High Density Standard Module (HDSM) Connectors (Continued) No. of Cavities Single Bay A Dim. B Dim. C Dim. D Dim. 38 1.000 25.40 1.500 38.10 2.050 52.07 2.450 62.23 3.050 77.47 .840 21.34 1.340 34.04 1.890 48.01 2.290 58.17 2.890 73.41 .450 11.43 .950 24.13 1.500 38.10 1.900 48.26 2.500 63.50 -- .725 18.42 .925 23.50 1.225 31.12 4.600 116.84 5.800 147.32 4.440 112.78 5.640 143.26 1.900 48.26 2.500 63.50 .925 23.50 1.225 31.12 78 120 152 200 -- Double Bay 304 400 How To Specify S -- Solder pot Z -- Coke Bottle Termination (Receptacle only, see Table I) ZA -- 4 Row Wire Termination (Plug only) ZB -- 8 Row Wire Termination (Plug only) X -- Special Wire and/or other than above HDSM 1 152 L 4 L 4 0.5 Connector Series Contact Location Wire Length 1 -- Full complement of contacts 2 -- Contacts in outside row only 3 -- Contacts in inside row only 4 -- Other than above or special housing Wire Color/Finish 1 -- All white 2 -- All yellow 3 -- All gray Layout 4 -- Gold plated 5 -- Tin dipped gold plated 6 -- Bare (unfinished) 7 -- Color coded per MIL-STD-681, System 1 8 -- Special color code 9 -- Ten basic color repeating on each row (A, B, C, D) (starting with black) 38, 78, 120, 152, 200, 304 & 400 Contact Type Wire Type L -- Low Force Pin SL -- Low Force Socket *A -- Type E, 7 strand *B -- Type ET, 7 strand *C -- Type E, 19 strand Wire Size 4--24 AWG 5--25 AWG Table I 6--26 AWG 8--28 AWG 0--30 AWG Dash No. 1 2 3 4 *D -- Type ET, 19 strand F -- 7 strand per MIL-W-22759/11 (#28 AWG only) G -- 19 strand per MIL-W-22759/11 26 AWG, 24 AWG L -- Copper, solid Q -- Stranded per MIL-W-22759/33 *Per MIL-W-16878 Gap Between Bushing "E" .100 2.54 .093 2.36 .118 2.99 .145 3.68 F Dim. G Dim. .120 3.05 .060 1.52 .235 5.97 .120 3.05 .180 4.57 .150 3.81 .260 6.60 .180 4.57 H Dim. (Ref.) .330 8.38 .330 8.38 .483 12.27 .330 8.38 54 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors Introduction High Density Circular Connectors Product Facts n High density, light-weight Multi-Pin Circular Connectors feature a crimp contact retention method, requiring no insertion or removal tools n Reverse gender available n Ideal for harsh environment n n n n n Unsealed -- No grommet/ o-ring Meets MIL Standards (high quality) but is not QPL qualified Ideally suited to applications where many conductors must be accommodated in a minimum of space with minimum weight MARC Series Connectors are non-magnetic Circular Connectors n Sealed -- Silicon rubber grommet/o-ring Contact rating 2.5A Our high density, lightweight Multi-Pin Circular Connectors are the industry's most advanced and are ideally suited to applications where many conductors must be accommodated in a minimum of space with minimum weight. All series of connectors feature a crimp contact retention method, requiring no insertion or removal tools. The MARC 43 Series Connectors conform to applicable performance requirements of MIL-C-26482 and has seen extensive service on many leading aerospace and ground support equipment programs. The MARC 53 Series Connectors, designed to conform to the USAF high reliability specification MIL-C-38300, as offers high density connector performance. The positive lock coupling mechanism, combined with our exclusive floating interfacial seal, offers outstanding performance under rigorous service conditions. The MARC 63 Series Connectors, our Bayonet Coupling Series, accommodates all insert patterns and layouts available in the MARC 43 Series Connectors, MARC 53 Series Connectors, and RMD Series Connectors. All insert assemblies are 3 completely interchangeable. Lighter in weight and smaller in size than any comparable connector on the market, it requires up to 50% less engagement/ separation force. Conversion to bayonet coupling shell from MARC 43 Series Connectors or MARC 53 Series Connectors is done without tools by merely transferring the contacts and insert assemblies into the MARC 63 Series Connectors shell. The newest addition to the Multi-Pin product line is the MARC 73 Series Connectors. The twist pin Circular Connector combines the lightweight, bayonet 55 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors Introduction (Continued) coupling feature of the MARC 63 Series Connectors with the twist pin high density, center-to-center contact spacing of 0.065 [1.65] inch. The utilization of 22 AWG twist pin and socket contacts provide for 50% greater contact densities SHM Receptacle MARC 43 Series Connectors & MARC 53 Series Connectors than presently offered in the MARC 43 Series Connectors, MARC 53 Series Connectors, or MARC 63 Series Connectors. Consult Tyco Electronics for detailed information. The MQR Series is a line of circular quick disconnect connectors for rugged environmental use. Mated MARC 53 Series Connectors Mated MARC 63 Series Connectors SHM Receptacle MARC 43 Series Connectors & MARC 53 Series Connectors Mated MARC 43 Series Connectors 56 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors MARC 43 Series Connectors A high density (.080 [2.03] contact centers), lightweight, subminiature, cylindrical connector series featuring crimp contacts and fingertip, push-pull, quick disconnect coupling. This series conforms to the applicable performance requirements of MIL-C-26482 and is available in unsealed, environmentally sealed, and hermetic types. General Information A large assortment in insert arrangements -- accommodating AWG 12 through 32 gauge wire and miniature coaxial cables -- is available for the design engineer's choice. The contacts are This proven series of connectors has a long history of outstanding performance connectors. Inserts are molded from flame-resistant, glass-filled diallyl phthalate, meeting ASTM D5948 requirements. All resilient parts are made of high temperature, silicone rubbers. Fuel resistant compounds are used where swelling affects the performance of the connector. All materials are carefully selected for their non-magnetic properties. The standard finish is clear, non-conductive anodize on on many military and aerospace programs. MARC 43 Series Connectors are ideal for applications where high performance must be achieved at low cost. connector housings and quick disconnect couplings. For threaded coupling applications, aluminum components are hard, black anodized, and stainless steel plug coupling is passivated with black oxide finish. Conductive finish modifications include gold, cadmium, and iridite finishes. Contacts are gold plated per MIL-G-45204 requirements. See page 63 for modification information. Circular Connectors MARC 43 Series Connector housings and quick disconnect couplings are machined from bar stock aluminum to combine maximum strength with minimum weight. Threaded couplings are machined from nonmagnetic, stainless steel bar stock for durability of the coupling threads. Contacts are manufactured from high conductivity copper alloys which have been selected for low contact resistance over the operating range of the Materials and Finishes retained by shoulder entrapment and can be crimped with the standard M22520 tools, using appropriate locators. 3 Service and Performance Data I. Electrical -- Electrical Ratings Current RatingDielectric Contact Amperes, Size Max., +27C1 22 AWG 5 amps 16 AWG 20 amps 12 AWG 50 amps 50 ohm 3 amps 3 amps 75 ohm 95 ohm 3 amps 1 Withstanding Voltage (RMS) 1000 1000 1000 1000 1250 1500 Working Voltage Sea 70,000 ft. Level [21,336 m] Alt. 750 300 750 300 750 300 750 300 1000 300 1250 300 Consult nomograph. II. Mechanical -- Durability: 500 Cycles Mate/Unmate. Coupling/Uncoupling Forces and Tightening Torques: Shell Size A B C Coupling/ Uncoupling Force (In-Lbs.) Max. 13 [57.8 N] 17 [75.6 N] 21 [93.4 N] Contact Size Wire Size 22 22, 24, 26 163 16, 18, 20 12 12 AWG 50 ohm 50 ohm 75 ohm 75 ohm 95 ohm 95 ohm Conductor Dia. (Stranded)1 .019-.032 .482-.813 .038-.061 .965-1.55 .071-.093 1.80-2.36 .013 Max. .330 .013 Max. .330 .013 Max. .330 Dielectric Dia. (Teflon) Shield Dia. Jacket Dia.2 -- -- -- -- -- -- .032-.036 .813-.914 .060-.066 1.52-1.68 .100-.104 2.54-2.64 .048-.054 1.22-1.37 .078-.084 1.98-2.13 .115-.123 2.92-3.12 .039-.054 .990-1.37 .065-.081 1.65-2.06 .096-.120 2.44-3.05 .065-.087 1.65-2.21 .096-.109 2.44-2.77 .137-.154 3.48-3.91 Tolerance of conductor diameters required for a reliable crimp. Smaller sizes readily accommodated -- consult Tyco Electronics. Smaller jacketed cable can be accommodated but environmental seal may be impaired. Smooth extruded jacket should be used for consistent wire sealing. 3 Size 16 AWG Contact for size 20 AWG Wire - Use Tool 010-0080-0000. 1 Tightening Torque (In-Lbs.) Retaining Nut Mounting Nut 20, Max. [2.26 Nm] 20, Max. [2.26 Nm] 20, Max. [2.26 Nm] 30-45 [3.39 Nm - 5.08 Nm] 40-55 [4.52 Nm - 6.21 Nm] 55-70 [6.21 Nm - 7.91 Nm] 2 Operating Temperature: -85F to 257F [-65C to +125C]. 57 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors MARC 43 Series Connectors (Continued) Test Data MARC 43 Series Connectors meet the applicable performance requirements of specification MIL-C-26482 (Navy) to include the following selected test parameters listed below: DESCRIPTION MIL-C-26482 Test Para TEST REQUIREMENTS Insulation Resistance, Room and High Temp., Para. 4.7.3 Insulation resistance of unmated connectors shall be 5000 megohms, minimum at room temperature and 2000 megohms, minimum, at 257F [+125C] when measured per MIL-STD-202, Method 302, Test Condition B. Dielectric Withstanding Voltage, Para. 4.7.4 No evidence of dielectric breakdown or flashover when mated and unmated plugs are subjected to 1000 volts, rms, per MIL-STD-202, Method 301. Durability, Para. 4.7.9 Plugs and receptacles designed to withstand up to 500 cycles of engagement and separation without detrimental electrical or mechanical damage to the connectors. Corrosion, Para. 4.7.10 Unmated plugs and receptacles shall show no exposure of basis metal due to corrosion which would affect electrical or mechanical performance of the connectors after subjection to 24 hours exposure to salt spray atmosphere per MIL-STD 202, Method 101. Sweep Vibration, Mated, Para. 4.7.11 Mated connectors shall show no circuit interruptions greater than 10 microseconds during 12 hours vibration to include six sweeps in two axes at -67F [-55C], room temperature, and 257F [+125C] per MIL-STD-202, Method 204, Test Condition B. Post inspection shall show no detrimental cracking, breaking, or loosening of parts. Moisture Resistance, Para. 4.7.13 and 4.7.13.1 The insulation resistance of mated connectors shall exceed 100 megohms after subjection to moisture resistance testing per MIL-STD-202, Method 106. Contact Retention, Para. 4.7.16 Contacts shall withstand 15 lbs [66.7 N] axial load without axial displacement in excess of 0.012 [0.305] or damage to contacts or inserts when the axial load is applied to the mating end of the contacts in unmated plugs and receptacles at a rate of approximately 1 lb/sec. Contact Arrangements1 "A Size" Insert Layouts (A = ) Shell Size 9 Insert Arrangement 2 Number of Contacts Contact Size -1 -2 19 7 50 Ohm 22 AWG -5 2-22 AWG 2-50 Ohm -11 -12 7 12 16 AWG 22 AWG -14 7-22 AWG 2-50 Ohm -17 4 16 AWG -21 6-16 AWG 1-50 Ohm "B Size" Insert Layouts (B = ) Shell Size 12 Insert Arrangement 2 Number of Contacts Contact Size -9 -103 12 37 50 Ohm 22 AWG -15 -19 13-22 AWG 12 6-50 Ohm 16 AWG -34 -37 5 13-22 AWG 95 Ohm 6-12 AWG -47 5 75 Ohm -49 29-22 AWG 2-16 AWG "C Size" Insert Layouts (C = ) Shell Size 15 Insert Arrangement 2 Number of Contacts Contact Size -3 19 50 Ohm Notes: 1 2 3 -4 61 22 AWG -7 22-22 AWG 2-75 Ohm -13 43-22 AWG 2-50 Ohm -27 5-75 Ohm 4-95 Ohm -48 12 75 Ohm Views shown are front face view of receptacles. Front face view of plugs is mirror image of that shown. Arrow ( ) indicates insert top or vertical position in relation to top or vertical position of connector housings. Arrangement also available in hermetic seal receptacles. 58 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors MARC 43 Series Connectors (Continued) Part Number and Ordering Information ble to take advantage of our "scoop-proof" design. (The style--pin or socket--of a coaxial contact refers to the outer contact body.) MARC 43 Series Connector part numbers indicate size, shape, insert layout, type of seal, style of contact and polarization. Note: Pin or socket (power or coaxial) contacts may be used in either plugs or receptacles. However, it is recommended that pins be placed in the receptacle when possi- Typical Part Number A 43 Supplemental Accessory Hardware. We also manufacture supplemental accessory hardware (protective covers, cable clamps, etc.) to adapt these connectors to almost any application. For modifications to fit your requirements, contact Tyco Electronics. Alternate Keying. Standard alternate polarizing key positions are shown below. Additional polarizing keyways are available upon request. E H 14 P Layout number Denotes Microdot Series P = Plug PF = Plug, sq. flange mtg. 5 (***) Polarizing Position N, 1, 2, 3, 4, etc. Modification Designator when Applicable (See Page 63) PT = Plug, threaded cpl. ring Circular Size A Size B Size C Unsealed A Hermetic H Sealed E H = Receptacle, single hole mtg. F = Receptacle, box mtg. FT = Receptacle, box mtg. (threaded coupl.) J= Receptacle, line cord S = Receptacle, solder mount (Hermetic) B = Receptacle, thru-bulkhead, double end (Hermetic) P = Pin (male) power contacts Circular Connectors PP = Double end pins (type B only) S = Socket (female) power CP = Coaxial pin contact, or combination of coaxial pin and pin power contacts Use one only CS = Coaxial socket contact, or combination of coaxial socket and socket power contacts Note: If P, S, CP, or CS does not appear in the numbering system, no contacts will be supplied with order (order separately). (1) Polarizing Key Positions All MARC 43 Series Connector multi-pin plugs and receptacles are available in alternate polarizing positions as listed below: Arrow ( ) indicates top or vertical position (master key-keyway) and coincides with top or vertical position of insert. This relationship remains constant with alternate polarizing key positions. Y X Receptacle Plug Size A Part No. A43****N A43****-1 A43****-2 A43****-3 A43****-4 A43****-5 Size B X 130 130 90 210 130 90 Y 110 150 110 110 35 230 3 Y X (1) N--for Normal (1) Part No. B43****N B43****-1 B43****-2 B43****-3 B43****-4 B43****-5 B43****-6 B43****-7 B43****-8 B43****-9 B43****-10 Size C X 130 130 130 105 155 80 190 130 215 80 130 Y 110 90 145 110 110 110 110 170 110 230 30 Part No. C43****N C43****-1 C43****-2 C43****-3 C43****-4 C43****-5 C43****-6 C43****-7 C43****-8 C43****-9 C43****-10 C43****11 C43****12 C43****13 C43****14 X 130 130 130 130 190 150 90 70 70 90 210 30 250 130 30 Y 110 90 150 170 110 110 110 110 230 230 110 110 30 30 230 59 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors MARC 43 Series Connectors (Continued) Configurations Type P Straight Plug, Push-Pull Coupling, Sealed or Unsealed (Mates with Receptacles, All Types) A 1.266 [32.16] B Shell Size A B C .175 [4.44] Type PF Dimensions A B .766 1.578 40.08 19.46 1.656 .953 42.06 24.21 1.75 1.141 28.98 44.45 .062 [1.57] Straight Plug, Square Flange Mounting, Push-Pull Coupling, Sealed or Unsealed (Mates with Receptacles, all Types.) D A Dia. B Typ. C Typ. .110 - .130 p yT [2.79 - 3.30] 1.266 [32.16] Shell Size A B C . Panel Cutout Dimensions A .730 18.54 .920 23.37 1.110 28.19 B .664 16.86 .786 19.96 .924 23.47 C .875 22.23 1.000 25.40 1.125 28.58 Type PT D .750 19.05 .940 23.88 1.130 28.70 Master Keyway Straight Plug, Threaded Coupling, Sealed or Unsealed (Mates with Receptacles, Types H, HH, and FT) A T Thread 1.500 Max. [38.1] Shell Size A B C Lockwire Holes A .813 20.65 1.000 25.40 1.19 30.23 Dimensions T (Class 2B) 5/8-32 UN 13/16-28 UN 1-28 UN 60 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors MARC 43 Series Connectors (Continued) Configurations (Continued) 1.36 [34.54] Type H Receptacle, Single Hole Mounting Sealed or Unsealed (Mates with Plugs, Types P, PF and PT) .065-.085 [1.65-2.16] .080-.100 [2.03-2.54] .125 [3.17] A Hex. Master Key C Hex. D E T Thread B Hex. Shell Size A B C A .75 19.05 .937 23.80 1.125 28.58 B .687 17.45 .875 22.23 1.062 26.97 Panel Cutout Dimensions C D E T (Class 2A) .562 .607-.611 .625-.629 5/8-32 UN 15.8-15.97 14.27 15.42-15.52 .75 .794-.798 .812-.816 19.05 20.17-20.27 20.62-20.72 13/16-28 UN .875 .975-.979 .999-1.003 1-28 UN 22.23 24.77-24.87 25.37-25.47 Circular Connectors .313 [7.95] max. panel for P & PF .109 [2.77] max. panel. for PT Type 43F Receptacle, Box Mounting, Sealed or Unsealed (Mates with Plugs, Types P and PF) 1.36 [34.54] .065-.085 [1.65-2.16] Master Polarizing Key .052-.072 [2.03-2.54] B Typ. Shell Size A B C A .875 22.23 1.000 25.40 1.125 28.58 Dimensions B .594 15.08 .786 19.96 .906 23.01 3 D A Typ. C Hex. .110-.130 Dia. [2.79-3.30] Typ. C .562 14.27 .75 19.05 .875 22.23 Panel Cutout D .595 15.11 .783 19.89 .960 24.38 Note: Unless otherwise shown, tolerances are: Decimals .015 [.381], fractions 132. 61 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors MARC 43 Series Connectors (Continued) Configurations (Continued) Type FT Receptacle, Box Mounting, Threaded Coupling, Sealed or Unsealed (Mates with Plugs, Types PT, P and PF) .065-.085 [1.65-2.16] 1.36 [34.54] Master Polarizing Key .052-.072 [2.03-2.54] D A Typ. C Hex. B Typ. T Thread Shell Size A B C A .875 22.23 1.000 25.40 1.125 28.58 .110-.130 Dia. [2.79-3.30] Typ. Panel Cutout Dimensions C T (Class 2A) .562 5/8-32 UN 14.27 .75 13/16-28 UN 19.05 .875 1-28 UN 22.23 B .594 15.08 .786 19.96 .906 23.01 D .645 16.38 .832 21.13 1.020 25.90 Max. panel thickness is .125 [3.18]. Type J A Receptacle, Line Cord, Sealed or Unsealed (Mates with Plugs, Types P and PF) B C Shell Size A B C A 1.703 43.26 1.781 45.24 1.875 47.63 Dimensions B 1.36 34.54 1.36 34.54 1.36 34.54 C .766 19.46 .953 24.21 1.141 28.98 Note: Unless otherwise shown, tolerances are: Decimals .015 [.381], fractions 132. 62 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors MARC 43 Series Connectors (Continued) Accessories Cable Clamps C .156 [3.96] B B D .156 [3.96] A A Straight Shell Size Part No. A 086-0099-00X1 B 086-0100-00X1 C 086-0101-00X1 Right-Angle A [Max.] .704 17.88 .773 19.63 .829 21.05 B [Max.] .750 19.05 .932 23.67 1.078 27.38 Contacts (see pages 78 and 79) Part No. A 086-0103-00X1 B 086-0104-00X1 C 086-0105-00X1 Pin Part No. 083-0009-00R4 083-0158-00R4 083-0173-00R4 Socket Part No. 082-0464-00Y9 082-0113-00T1 082-0132-00T1 084-0024-00T2 084-0027-00T2 141-1500-0001 142-1500-0001 084-0025-00T2 084-0026-00T2 084-0028-00T2 084-0029-00T2 Contact Size 22 AWG 16 AWG 12 AWG 50 ohm Coaxial 75 ohm Coaxial 95 ohm Coaxial Sealed Connector Part No. 086-0055-0000 086-0056-0000 086-0057-0000 086-0058-0000 086-0059-0000 086-0060-0000 C [Max.] 1.100 27.94 1.250 31.75 1.469 37.31 D [Max.] .879 22.33 1.067 27.10 1.233 31.32 D Receptacle Cover Protective Covers 3 Plug Cover Plug Cover Part No.1 With Chain Without Chain Receptacle Cover Part No.1 Without Chain With Chain Unsealed Connector Part No. 086-0001-0000 086-0014-0000 086-0015-0000 086-0061-0000 086-0062-0000 086-0063-0000 C B 1 B [Max.] .600 15.24 .770 19.55 .962 24.43 Contact Cavity Sealing Plugs (see page 80) A Shell Size A [Max.] .737 18.72 .913 23.19 1.048 26.62 Circular Connectors Contact Size 22 AWG 16 AWG 12 AWG 50 ohm Coaxial (Solder Type) 50 ohm Coaxial (Crimp Type) 75 ohm Coaxial 95 ohm Coaxial Shell Size A 086-0049-00J2 086-0073-00P1 086-0052-00J2 086-0076-00P1 B 086-0050-00J2 086-0074-00P1 086-0053-00J2 086-0077-00P1 C 086-0051-00J2 086-0075-00P1 086-0054-00J2 086-0078-00P1 A .766 19.46 .953 24.21 1.141 28.98 Dimensions (Max.) B C .950 .969 24.13 24.62 .950 1.156 24.13 29.36 .950 1.344 24.13 34.14 D .913 23.19 .913 23.19 .913 23.19 For threaded plug (PT) and receptacle (FT) covers, consult Tyco Electronics. Wire rope/lanyard attachments and plastic protective caps also available, consult Tyco Electronics. Modifications Standard modifications include: The MARC 43 Series Connector modification identification system provides alteration of standard MARC 43 Series Connectors to include special finishes, accessories, MARC 53 Series Connector housings, and custom quality assurance provisions -- processing, testing, serialization, traceability. Consult your sales representative or Tyco Electronics for additional modification information. (009): MARC 43 Series Connector, anodized finish -- black. (048): MARC 43 Series Connector, iridite finish -- gold. (056): MARC 43 Series Connector, cadmium plated -- clear. (057): MARC 43 Series Connector including cable clamp, straight type. (078): MARC 43 Series Connector insert arrangement plus MARC 53 Series Connector positive lock coupling. (094): MARC 43 Series Connector coaxial insert arrangement to include all-crimp coaxial contacts plus MARC 53 Series Connector positive lock coupling. (098): MARC 43 Series Connector connector including cable clamp, right-angle type. 63 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors MARC 53 Series Connectors General Information The MARC 53 Series Connector family represents a major advancement in the design of high density (.080 [2.03] contact centers), subminiature, power and coaxial contact connectors. The MARC 53 Series Connectors consists of two connector styles -- the Military approved MD53 featuring shoulder entrapped contacts, and the new RMD53 utilizing rear insertable/ removable contacts. MARC 53 Series Connectors combine positive lock -- the rugged, push-pull, lockcoupling mechanism -- with the unique positive seal multiple sealing system. Positive lock is our new finger-tip, push-pull coupling with the safety lock feature, and is the only connector made with positive "blind mating" indication. When the plug is fully engaged, the coupling ring can be rotated 45 to the safety lock position; if the plug is not completely engaged, the coupling ring cannot be turned to the safety lock position. Consequently, under "blindmating" conditions, it is always possible to determine if the plug is properly engaged without visual reference, damage, or accidental disengagement. The environmental integrity is guaranteed by multiple seal construction using silicone rubber "0" rings and a floating, voidless insert construction. The floating insert design allows the inserts to move within the connector housing to control interfacial sealing pressure in spite of tolerance accumulation, and a compression interfacial seal with minimum engaging force. Both the primary "0" ring system and the continuous dielectric construction withstand the MIL-C-38300A altitude breathing test. The sealing system meets the air leakage requirements of not more than 1 cubic inch of air per hour at a 30 P.S.l. pressure differential. This redundant sealing method is indicative of the inherent reliability built into our connectors. MARC 53 Series Connector power contacts are manufactured from high grade copper alloys, and are designed to be crimped with standard M22520 tooling using subminiature contact locators. MARC 53 Series Connectors incorporate hard insulators in both the plug and receptacle inserts for exceptional contact stability. Shoulder entrapment positively retains the front insertable MD53 contacts between the front and rear insulators. The new RMD53 contacts are rear insertable and removable and are retained within the connector insulators by clips which can be visually inspected. No insertion or extraction tools are MD53 shoulder entrapped contacts required for either the MD53 or RMD53 contacts using nominal size wire. MARC 53 Series Connectors are truly field serviceable... no special tools are required for maintainability. In addition, connector subcomponents damaged through handling or misuse can be procured separately generally without the need to scrap entire connector units. Weight reductions as high as 67% are achieved without loss of performance. MARC 53 Series Connectors are available in both environmental and hermetic styles. In addition to the positive lock plug, a threaded coupling plug is also available. Part numbers for configurations offering various finishes and accessories plus other design variations to satisfy special requirements are also available. RMD53 rear insertable contacts Materials and Finishes Housings and quick disconnect couplings are machined from bar stock aluminum to combine maximum strength with minimum weight. Threaded couplings are machined from non-magnetic, stainless steel bar stock for durability of the coupling threads. Contacts are manufactured from high conductivity copper alloys which have been selected for low contact resistance over the operating range of the connectors. Inserts are molded from flame-resistant, glass-filled diallyl phthalate, meeting ASTM D5948 requirements. All resilient parts are made of hightemperature, silicone elastomers. Fuel resistant compounds are used where swelling affects the performance of the connector. All materials are selected for their nonmagnetic properties. The standard finish is hard black, non-conductive, anodized finish on connector housings and quick disconnect couplings; stainless steel threaded coupling is passivated with black oxide finish. Conductive finish modifications include gold finish and electroless nickel finish. Multi-finish modifications for connector plugs include black anodized disconnect coupling with conductive finish on shell grounding members. Contacts are gold plated per MIL-G-45204 requirements. See Page 73 for modification information. 64 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors MARC 53 Series Connectors (Continued) Service and Performance Data I. Electrical -- Electrical Ratings 1 Contact Size Current Rating (Amperes, Max., 81F [+27C]) Dielectric Withstanding Voltage (RMS) 22 AWG 16 AWG 5 20 1000 1000 Working Voltage 110,0001 Sea Ft. Alt. Level 750 300 750 300 Contact Resistance (Millivolts, Max.) 15 20 10,000 ft equals 33,528 m altitude. Wire Sizes Accommodated Cond. Dia. (Stranded)1 .019-.032 [.483-.813] .038-.061 [.965-1.55] Contact Size 22 AWG 16 AWG Jacket Size2 .039-.054 [.991-1.37] 065-.081 [1.65-2.05] Tolerance of conductor diameters required for a reliable crimp. Smaller sizes readily accommodated -- consult Tyco Electronics. 2 Smaller jacketed cable can be accommodated but environmental seal may be impaired. Smooth extruded jacket should be used for consistent wire sealing. 1 Insulation Resistance: 5000 megohms, minimum, at room ambient conditions. II. Mechanical -- Durability: 500 Cycles Mate/Unmate. Coupling/Uncoupling Forces and Tightening Torques: 9 12 15 18 Coupling/ Uncoupling Force (In-Lbs.) Max. 18 [80.07 N] 22 [97.86 N] 27 [120.10 N] 32 [142.34 N] Tightening Torque (In-Lbs.) Retaining Nut Mounting Nut 20 [2.26 Nm], Max. 20 [2.26 Nm], Max. 20 [2.26 Nm], Max. 20 [2.26 Nm], Max. Circular Connectors Shell Size 30-45 [3.39 - 5.08 Nm] 40-55 [4.52 - 6.21 Nm] 55-70 [6.21 - 7.91 Nm] 70-85 [7.91 - 9.60 Nm] Operating Temperature: -67F to 257F [-55C to +125C] Connector Mated Length: MD Plug (06) mated to MD Receptacles (00) (01) (02) (12): 2.031 [51.58], max. RMD Plug (06) mated to RMD Receptacles: 2.217 [56.31], max. 3 65 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors MARC 53 Series Connectors (Continued) Test Data MARC 53 Series Connectors exceed the requirements of specification MIL-C-38300A (USAF) as detailed in the applicable M38300A (USAF) military specification sheets. MARC 53 Series Connectors meet the following selected test parameters as specified below: DESCRIPTION MIL-C-38300 Test Para TEST REQUIREMENTS Contact Retention Para. 4.10.3 MD Contacts shall withstand 15 lbs [66.72 N] axial load and RMD contacts 10 lbs [44.48 N] axial load without axial displacement in excess of 0.012 [.305] or damage to contacts or inserts when the axial load is applied to the mating end of the contacts in unmated plugs and receptacles at a rate of approximately 1 lb/sec. [4.45 N]. Contact Resistance Para. 4.10.8 The potential drop across normally mated contacts shall not exceed 25 mv under room ambient and high temperature service conditions when measured as specified in MIL-C-26636, Fig. 2, with maximum rated current. Dielectric Withstanding Voltage, Altitude and Sea Level Para. 4.10.10 No evidence of dielectric breakdown or flashover when mated and unmated plugs are subjected to 645 and 180 volts RMS, respectively, at altitudes up to 110,000 feet [33,528 m] and 1000 volts RMS at sea level. Insulation Resistance, Room and High Temp. Para. 4.10.13 and 4.10.13.1 Insulation resistance of mated plugs and receptacles shall be 5000 megohms, minimum, at room temperature and 1000 megohms, minimum, at 257F [+125C] when measured per MIL-STD-202, Method 302, Test Condition B. Coupling and Uncoupling Para. 4.11.3 Plugs and receptacles shall withstand up to 500 cycles of engagement and separation (locking mechanism actuated with each cycle) without detrimental damage to plugs or receptacles or not satisfying subsequent tests of MIL-C-38300. Fluid Immersion Para. 4.11.5 Mating and unmating forces shall not exceed 27 Ibs, [120.10 N] maximum, (15 shell size) after fully wired plugs and receptacles are immersed for 20 hours, each, in hydraulic fluid (MIL-H-5606) and high temperature lubricating oil (MIL-L-9236) followed by a one-hour dry. Sweep Vibration, Mated Para. 4.11.6 Mated connectors shall show no circuit interruptions greater than one microsecond during 12 hours vibration to include six sweeps in each axis at extreme temperatures of -85F [-65C] and 257F [+125C] per MIL-STD-202, Method 204, Test Condition D. Post inspection shall show no detrimental cracking, breaking, or loosening of parts. Moisture Resistance Para. 4.11.8 The insulation resistance of mated connectors shall exceed 1000 megohms after subjection to moisture resistance testing per MIL-STD-202, Method 106, as amended by MIL-C-38300. Altitude Breathing Para. 4.11.12 The insulation resistance of wired and mated connectors shall be 5000 megohms, minimum, and there shall be no flashover or breakdown at a test voltage of 1000 volts RMS after the third cycle and while immersed in 5% salt water solution at 68F [20C] and room ambient pressure pressure at 68F [20C]. Salt Spray Para. 4.11.13 Unmated plugs and receptacles shall show no excessive corrosion which would detrimentally affect the electrical and mechanical performance of the connectors after subjection to 24 hours exposure to salt spray atmosphere per MlL-STD-202, Method 101. 66 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors MARC 53 Series Connectors (Continued) Contact Arrangements 1,2 Shell Size 9 Shell Size 12 Shell Size 15 Shell Size 186 Insert Arrangement 3 Number of Contacts Contact Size 9-19 4,5 19 22 AWG 12-37 4,5 37 22 AWG 15-31 5 31 16 AWG 18-91 4,5 91 22 AWG Shell Size 15 Shell Size 15 Shell Size 15 15-61 4,5 61 22 AWG 15-55 55 22-20 AWG 15-43 1-95 ohm 42-22 AWG Shell Size 9 Insert Arrangement 3 Number of Contacts Contact Size 9-7 5 7 16 AWG Views shown are front face view of receptacles. Front face view of plugs is mirror image of that shown. In addition to those inserts shown, MARC 43 Series Connector inserts may be utilized in MARC 53 Series Connector housings. See page 63, MARC 43 Series Connector modifications. 3 Arrow ( ) indicates insert top or vertical position in relation to top or vertical position of connector housings. 4 Arrangement also available in RMD style. 5 Arrangement also available in hermetic seal receptacles. 6 Arrangement available in 06, 00, 01. 1 2 Circular Connectors Part Number and Ordering Information MARC 53 Series Connector part numbers indicate size, shape, insert layout, type of seal, style of contact and polarization. Typical Part Number Note: Pin or socket (power or coaxial) contacts may be used in either plugs or receptacles. However, it is recommended that pins be placed in the receptacles when possible to take advantage of our "scoopproof" design. MD53 06 facture supplemental accessory hardware (protective covers, shield adapters, etc.) to adapt these connectors to almost any application. For modifications to fit your requirements, contact Tyco Electronics. Alternate Keying -- Standard alternate polarizing key positions are shown below. Additional polarizing keyways are available upon request. Supplemental Accessory Hardware -- We also manu- E 15 61 S N 3 (***) Modification Designator when applicable (See page 73) Series -- MD53 or RMD53 style Single hole mntng. receptacle 00 Polarizing position N, 1, 2, 3, 4, etc. Line cord recept. 01 P -- Pin, Power Pin, Coaxial Pin S -- Socket, Power Socket, Coaxial Socket Box mntng. recpt. 02 Straight plug, positive lock quick disconnect 06 Box mntng. recept., thd 12 Straight plug, threaded coupling 16 NOTE: If P or S does not appear in the numbering system, no contacts will be supplied with order (order separately) Insert arrangement number Shell Size -- O.D. of receptacle barrel to nearest .063 [1.60] E -- Environmentally sealed H -- Hermetic seal (receptacle only). 67 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors MARC 53 Series Connectors (Continued) Polarizing Key Positions (1) (1) All of our multi-pin plugs and receptacles are available in alternate polarizing positions as listed below: Y Y X X Plug (Shell sizes 9, 12, 15 only) Shell Size 9 Part No. (R) MD53-***9-***-N (R) MD53-***9-***-1 (R) MD53-***9-***-2 (R) MD53-***9-***-3 (R) MD53-***9-***-4 (R) MD53-***9-***-5 X 130 130 90 210 130 90 Receptacle (Shell sizes 9, 12, 15 only) Shell Size 12 X Part No. (R) MD53-***12-***-N 130 (R) MD53-***12-***-1 130 (R) MD53-***12-***-2 130 (R) MD53-***12-***-3 105 (R) MD53-***12-***-4 155 (R) MD53-***12-***-5 80 (R) MD53-***12-***-6 190 (R) MD53-***12-***-7 130 (R) MD53-***12-***-8 215 (R) MD53-***12-***-9 80 (R) MD53-***12-***-10 130 Y 110 150 110 110 35 230 Y 110 90 145 110 110 110 110 170 110 230 30 Shell Size 15 Part No. X (R) MD53-***15-***-N 130 (R) MD53-***15-***-1 130 (R) MD53-***15-***-2 130 (R) MD53-***15-***-3 130 (R) MD53-***15-***-4 190 (R) MD53-***15-***-5 150 (R) MD53-***15-***-6 90 (R) MD53-***15-***-7 70 (R) MD53-***15-***-8 70 (R) MD53-***15-***-9 90 (R) MD53-***15-***-10 210 (R) MD53-***15-***-11 30 (R) MD53-***15-***-12 250 (R) MD53-***15-***-13 130 (R) MD53-***15-***-14 30 Y 110 90 150 170 110 110 110 110 230 230 110 110 30 30 230 (1) (1) A A E B B E C C D D Plug (Shell size 18 only) Part No. (R) MD53-***18-***-N (R) MD53-***18-***-1 (R) MD53-***18-***-2 (R) MD53-***18-***-3 (R) MD53-***18-***-4 (R) MD53-***18-***-5 (R) MD53-***18-***-6 (R) MD53-***18-***-7 (R) MD53-***18-***-8 (R) MD53-***18-***-9 (R) MD53-***18-***-10 Receptacle (Shell size 18 only) Shell Size 18 B A 60 130 70 130 55 130 50 130 125 75 80 150 50 90 120 70 130 70 35 90 140 75 C 185 205 210 190 190 205 175 175 205 130 210 D 250 270 250 235 250 250 250 250 260 215 250 E 325 320 310 305 320 300 315 295 325 285 310 Arrow ( ) indicates top or vertical position (master key/keyway) and coincides with top or vertical position of insert shown on page 59. This relationship remains constant with alternate polarizing key positions. (R) Rear insertable and removable. (1) 68 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors MARC 53 Series Connectors (Continued) Master Keyway Configurations MD53-06E/RMD53-06E A Straight Plug, positive lock Coupling, Environmental (Mates with Receptacles, All Types) B C .093 Max., [2.36] RMD only Shell Size 9 12 15 18 Dimensions B (Max.) 1.000 25.4 1.000 25.4 1.000 25.4 1.000 25.4 A .890 22.60 1.078 27.38 1.262 32.05 1.577 40.06 C (Max.) 1.281 32.54 1.281 32.54 1.281 32.54 1.281 32.54 Circular Connectors MD53-16E/RMD53-16E Master Keyway Straight Plug, Threaded Coupling, Environmental (Mates with Receptacles, Types 00 and 12; Not available in 18 Shell Size) A B C Lockwire Holes 3 T Thread .093 Max., [2.36] RMD only Shell Size 9 12 15 18 A .812 20.62 1.000 25.4 1.187 30.15 1.437 36.50 B (Max.) 1.125 28.57 1.125 28.57 1.125 28.57 1.125 28.57 Dimensions C (Max.) 1.500 38.1 1.500 38.1 1.500 38.1 1.437 36.50 T (Class 2B) 5/8-32UN 13/16-28UN 1-28UN 1-14-28UN 69 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors MARC 53 Series Connectors (Continued) Configurations (Continued) C .065-.085 [1.65-2.16] .125 [3.18] G .080-.100 [2.03-2.54] MD53-00E/RMD53-00E Receptacle, Single Hole Mounting, Environmental (Mates with Plugs, Type 06 and 16) Master Key A Hex. E D F Hex. Panel Cutout B Hex. T Thread .093 Max., [2.36] RMD Only Shell Size 9 12 15 18 A .75 19.05 .937 23.80 1.125 28.58 1.625 41.28 B .687 17.45 .875 22.23 1.062 26.97 1.375 34.93 C 1.360 34.54 1.360 34.54 1.360 34.54 1.360 34.54 D .607-.611 15.42-15.52 .794-.798 20.17-20.27 .975-.979 24.76-24.86 1.214-1.218 30.83-30.94 Dimensions E .625-.629 15.87-15.97 .812-.816 20.62-20.73 .999-1.003 25.37-25.48 1.251-1.255 31.77-31.87 F .563 14.30 .75 19.05 .875 22.23 1.125 28.58 G .090 2.29 .090 2.29 .090 2.29 .125 3.18 T (Class 2A) 5/8-32NS 13/16-28NS 1-28UNS 1-1/4-28UN Note: .313 [7.95] Maximum Panel Thickness when mated with a positive lock 06 Plug. .109 [2.77] Maximum Panel Thickness when mated with threaded 16 Plug. MD53-01E/RMD53-01E Master Key Receptacle, Line Cord, Environmental (Mates with Plug, Type 06) C Hex. B A .093 Max., [2.36] RMD only Shell Size 9 12 15 18 A (Max.) 1.360 34.54 1.360 34.54 1.360 34.54 1.360 34.54 Dimensions B (Max.) .766 19.46 .953 24.21 1.141 28.98 1.578 40.08 C .562 14.27 .75 19.05 .875 22.23 1.125 28.58 Note: Unless otherwise shown, tolerances are: decimals .015 [.381]; fractions 132. 70 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors MARC 53 Series Connectors (Continued) Configurations (Continued) .065-.085 [1.65-2.16] MD53-02E/RMD53-02E Receptacle, Box Mounting, Environmental (Mates with Plug, Type 06) 1.36 [34.54] Master Polarizing Key .052-.072 [1.32-1.80] D A Typ. C Hex. .093 Max. RMD only [2.36] .110-.130 Dia. [2.79-3.30] Typ. B Typ. Panel Cutout .375 [9.53] Max. Panel Thickness for rear-mount applications. Shell Size 9 12 15 18 .065-.085 [1.65-2.16] Receptacle, Box Mounting, Environmental (Mates with Plugs, Type 06 and 16; not available in 18 Shell Size) D .595 15.11 .783 19.89 .960 24.38 1.212 30.78 Circular Connectors MD53-12E/RMD53-12E Threaded Coupling Dimensions B C .594 .563 15.09 14.30 .786 .75 19.96 19.05 .875 .906 23.01 22.23 1.062 1.125 26.97 28.58 A .875 22.23 1.000 25.40 1.125 28.58 1.344 34.14 1.36 [34.54] Master Polarizing Key .052-.072 [1.32-1.80] D A Typ. C Hex. T Thread 3 .110-.130 Dia. [2.79-3.30] Typ. B Typ. .093 Max. RMD only [2.36] Panel Cutout .125 [3.18] Max. Panel Thickness when mated with threaded 16 Plug for rear mount applications. Shell Size 9 12 15 A .875 22.23 1.000 25.40 1.125 28.58 B .594 15.09 .786 19.96 .906 23.01 Dimensions C T (Class 2A) .563 5/8-32UN 14.30 .75 13/16-28UN 19.05 .875 1-28UN 22.23 D .645 16.38 .832 21.13 1.020 25.91 Note: Unless otherwise shown, tolerances are: decimals .015 [.381]; fractions 132. 71 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors MARC 53 Series Connectors (Continued) Accessories Test Adapter The test adapter accessory is utilized primarily as a connector simulator to preserve the end-use connector where this connector would be subjected to extensive testing, matings, or probings. The test adapter, when mated, provides the exact mating interface as that of the end-use connector and is completely field serviceable. Test Adapter Product Part Number System How to Specify T 53 E 15 61 SP N (XXX) Modification Designator Polarizing Position Contact Sex SP -- Sockets Plug end, Pins Receptacle end PS -- Pins Plug end, Sockets Receptacle end Layout Shell Size Adapter Type E -- Sealed A -- Unsealed Series or Style 53 -- MARC 53 Series Connector 63 -- MARC 63 Series Connector Test Adapter Dimension A (Max.) B (Max.) .906 2.670 23.01 67.82 1.094 2.670 27.79 67.82 1.281 2.670 32.54 67.82 1.594 2.670 40.49 67.82 Shell Size 9 12 15 18 B A Dia. C A D B Receptacle Cover Plug Cover Protective Covers Shell Size 1 Receptacle Cover Part No.1 With Chain Without Chain Plug Cover Part No.1 With Chain Without Chain 9 086-0049-00AL 086-0073-00W3 086-0052-00L6 086-0076-00P2 12 086-0050-00AL 086-0074-00W3 086-0053-00L6 086-0077-00P2 15 086-0051-00AL 086-0075-00W3 086-0054-00L6 086-0078-00P2 18 086-0146-00AL 086-0139-00W3 086-0147-00L6 086-0140-00P2 A .766 19.46 .953 24.21 1.141 28.98 1.578 40.08 Dimensions (Max.) B C .969 .950 24.13 24.61 .950 1.156 29.36 24.13 .950 1.344 24.13 34.14 1.000 1.781 25.4 45.24 D .913 23.19 .913 23.19 .913 23.19 .913 23.19 For threaded plug (PT) cover, consult Tyco Electronics. Wire rope/lanyard attachments and plastic protective caps also available, consult Tyco Electronics. 72 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors MARC 53 Series Connectors (Continued) Accessories (Continued) T Cable Clamps Shell Size 9 12 15 18 .156 [3.96] Clamp Part No. RMD MD A .704 086-0099-00F5 086-0175-00F3 17.88 086-0100-00F5 086-0176-00F3 .773 19.63 086-0101-00F5 086-0177-00F3 .829 21.06 086-0142-00F5 086-0178-00F3 .890 22.61 Shell Size MD Clamp Part No. RMD .750 19.05 1/2-20 UNF .932 UNEF 23.67 11/16-24 1.078 27.38 13/16-24 UNEF 1.250 1-28 UN 31.75 A 9 086-0103-00F5 086-0179-00F3 12 086-0104-00F5 086-0180-00F3 15 086-0105-00F5 086-0181-00F3 18 086-0143-00F5 086-0182-00F3 T Thd. 2A B B A Straight B (Max.) C (Max.) .600 15.24 .775 19.68 .962 24.43 1.185 30.01 .737 18.72 .913 23.19 1.048 26.62 1.225 31.12 1.100 27.94 1.250 31.75 1.469 37.31 1.550 39.37 C T Thd. 2A D .879 1/2-20 UNF 22.32 1.067 27.10 11/16-24 UNEF 1.233 31.32 13/16-20 UNEF 1.550 1-28 UN 39.37 .156 [3.96] B D T A Right-Angle Circular Connectors Contacts (see pages 78 and 79) Contact Size 22 AWG 16 AWG Pin Part No. MD RMD 083-0009-00R4 083-1200-00R4 -- 083-0158-00R4 Socket Part No. MD RMD 082-0464-00Y9 082-0462-00Y9 082-0113-00T1 -- Note: Standard packaging includes same quantity of contacts as contact cavities in insert. Contact Cavity Sealing Plugs (see page 80) Contact Size 22 AWG 16 AWG Standard Length Part No. MD RMD 086-0055-0000 086-0148-0000 -- 086-0056-0000 Short Length Part No. MD RMD 082-0009-0000 086-0009-0000 082-0010-0000 -- 3 Note: Standard length plug occupies contact cavity and wire sealing grommet. Short length plug occupies wire sealing grommet only (to be used behind non-wired contacts and in plugs which mate to hermetic receptacles). Modifications We offer a unique modification identification system which provides alteration of standard MARC 53 Series Connectors to include special finishes, accessories, MARC 43 Series Connector contact arrangements, and custom quality assurance provisions -- processing, testing, serialization, traceability. Consult Tyco Electronics for additional modification information. Standard modifications include: (503): MARC 53 Series Connector including cable clamp, straight type (504): MARC 53 Series Connector including cable clamp, rightangle type (507): MARC 53 Series Connector, electroless nickel finish (508): MARC 53 Series Connector, black anodized coupling ring, gold over electroless nickel housings, retaining nuts and hardware. (506): MARC 53 Series Connector, gold finish 73 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors MARC 63 Series Connectors MARC 63 Series Connectors RMD63 Performance Data MARC 63 Series Connectors,0 RMD63 Series meet or exceed the performance requirements of specification MIL-C38300A (USAF) as detailed in the M38300A (USAF) military specification sheets covering the MARC 53 Series Connectors. Tyco Electronics can supply detailed, cross reference information. MARC 63 Series Connectors, RMD63 Series meet the following selected test parameters as specified below: DESCRIPTION TEST REQUIREMENTS Contact Retention Contacts are to withstand 15 lbs. [66.72 N] axial load and RMD contacts 10 lbs. [44.48 N] axial load without axial displacement in excess of 0.012 [.305] or damage to contacts or inserts when the axial load is applied to the mating end of the contacts in unmated plugs and receptacles at a rate of approximately 1 lb/sec. [4.45 N]. Contact Resistance The potential drop across normally mated contacts shall not exceed 25 mv under room ambient and high temperature service conditions when measured as specified in MIL-C-26636, Fig. 2, with maximum rated current. Dielectric Withstanding Voltage, Altitude and Sea Level No evidence of dielectric breakdown or flashover when mated and unmated plugs are subjected to 645 and 180 volts RMS, respectively, at altitudes up to 110,000 [33,528 m] feet and 1000 volts RMS at sea level. Insulation Resistance, Room and High Temp. Insulation resistance of mated plugs and receptacles shall be 5000 megohms, minimum, at room temperature and 1000 megohms, minimum, at 257F [+125C] when measured per MIL-STD-202, Method 302, Test Condition B. Coupling and Uncoupling Plugs and receptacles shall withstand up to 500 cycles of engagement and separation without detrimental damage to plugs or receptacles or not satisfying subsequent tests of MIL-C-38300. Fluid Immersion Mating and unmating forces shall not exceed 27 lbs. [120.10 N], maximum, (15 shell size) after fully wired plugs and receptacles are immersed for 20 hours, each, in hydraulic fluid (MIL-H-5606) and high temperature lubricating oil (MIL-L-9236) followed by a one-hour dry. Sweep Vibration, Mated Mated connectors shall show no circuit interruptions greater than one microsecond during 12 hours vibration to include six sweeps in each axis at extreme temperatures of -85F [-65C] and 257F [+125C] per MIL-STD-202, Method 204, Test Condition D. Post inspection shall show no detrimental cracking, breaking, or loosening of parts. Moisture Resistance The insulation resistance of mated connectors shall exceed 1000 megohms after subjection to moisture resistance testing per MIL-STD-202, Method 106, as amended by MIL-C-38300. Altitude Breathing The insulation resistance of wired and mated connectors shall be 5000 megohms, minimum, and there shall be no flashover or breakdown at test voltage of 1000 volts RMS after the third cycle and while immersed in 5% salt water solution at 68F [20C] and room ambient pressure at 68F [20C]. Salt Spray Unmated plugs and receptacles shall show no excessive corrosion which would detrimentally affect the electrical and mechanical performance of the connectors after subjection to 24 hours exposure to salt spray atmosphere per MIL-STD-202, Method 101. 74 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors MARC 63 Series Connectors (Continued) Part Number and Ordering Information Connector part numbers indicate size, shape, insert layout, type of seal, style of contact and polarization. Note: Pin or socket (power or coaxial) contacts may be used in either plugs or receptacles. However, it is recommended that pins be placed in the receptacle when possible to take advantage of our "scoop-proof" design. Typical Part Number 06 MD63 E 15 61 S N (***) Modification Designator when applicable (See page 77) Series -- MD63 or RMD63 style Single hole mntng. receptacle 00 Line cord recept. 01 Box mntng. recpt. 02 Straight plug, bayonet quick disconnect Polarizing position (1) N, 1, 2, 3, 4, etc. . . . P -- Pin power contact S -- Socket power contact Insert arrangement number (2) Shell Size -- O.D. of receptacle barrel to nearest 1/16 inch 06 E -- Environmentally sealed H -- Hermetic seal (receptacle only). Circular Connectors (1) For polarizing key positions see MARC 53 Series Connectors. (2) For contact arrangements see MARC 53 Series Connectors. Note: If P or S does not appear in the numbering system, no contacts will be supplied with order (order separately). Configurations MD63-06E/RMD63-06E Master Polarizing Keyway Straight Plug, Bayonet Coupling, Environmental and Non-Environmental (Mates with Receptacles 02, 00 and 01) 3 A B C Shell Size 9 12 15 18 A .813 20.65 1.000 25.40 1.125 28.58 1.594 40.49 Dimensions B (Max.) 1.000 25.4 1.000 25.4 1.000 25.4 1.000 25.4 .093 Max. [2.36] C (Max.) 1.288 32.72 1.288 32.72 1.288 32.72 1.288 32.72 75 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors MARC 63 Series Connectors (Continued) Configurations (Continued) .110-.130 Dia. [2.79-3.302] 4 Holes Master Polarizing Key MD63-02E/RMD63-02E Receptacle, Box Mounting, Environmental and NonEnvironmental (Mates with Plug, Type 06) C Hex. B Typ. .093 Max. [2.36] A Typ. .065-.085 [1.65-2.16] Panel Cutout .375 [9.53] Max. Panel Thickness for rear mount applications. 1.360 [34.54] Shell Size A .875 22.23 1.000 25.40 1.125 28.58 1.344 34.14 9 12 15 18 MD63-00E/RMD63-00E B .662 16.81 .786 19.96 .906 23.01 1.062 26.97 Dimensions C .562 14.27 .75 19.05 .875 22.23 1.125 28.58 B Hex. F Hex. A Hex. T Thread Shell Size 9 12 15 18 A .813 20.65 1.000 25.40 1.125 28.58 1.625 41.28 B .75 19.05 .937 23.80 1.062 26.97 1.375 34.93 D .693-.697 17.60-17.70 .881-.885 22.38-22.48 1.006-1.011 25.55-25.68 1.250-1.260 30.48-32.00 .125 [3.18] Master Polarizing Key Receptacle, Single Hole Mounting, Environmental and Non-Environmental (Mates with Plug, Type 06) D .052-.072 [1.32-1.83] .093 Max. [2.36] C E Panel Cutout Dimensions D E .669-.673 .693-.697 16.99-17.09 17.60-17.70 .850-.856 .881-.885 21.59-21.74 22.38-22.48 .975-.979 1.006-1.010 24.76-24.87 25.55-25.65 1.212-1.216 1.251-1.255 30.78-30.88 31.78-31.88 C 1.360 34.54 1.360 34.54 1.360 34.54 1.360 34.54 D F .562 14.27 .75 19.05 .875 22.23 1.125 28.58 T (Class 2A) 11/16-32UN 7/8-28UN 1-28UN 1-1/4-28UN Master Polarizing Key MD63-01E/RMD63-01E Receptacle, Line Cord, Environmental (Mates with Plug, Type 06) Shell Size C Hex. B 9 12 .093 Max. [2.36] 15 A 18 A 1.360 34.54 1.360 34.54 1.360 34.54 1.360 34.54 Dimensions B (Max.) .703 17.86 .891 22.63 1.016 25.81 1.203 30.56 C .562 14.27 .75 19.05 .875 22.23 1.125 28.58 76 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors MARC 63 Series Connectors (Continued) Accessories Cable Clamps T Thread Shell Size Part No. 9 086-0175-00N1 12 086-0176-00N1 15 086-0177-00N1 18 086-0178-00N1 B .156 [3.96] .225 Max. [5.72] A A .704 17.88 .773 19.63 .829 21.06 .890 22.61 B .750 19.05 .932 23.67 1.078 27.38 1.250 31.75 T Thread 1/2-20UNF-2A 11/16-24UNEF-2A 13/16-20UNEF-2A 1-28UN-2A Straight C .156 [3.96] .225 Max. [5.72] B D T Thread A Angle Part No. 9 086-0179-00N1 12 086-0180-00N1 15 086-0181-00N1 18 086-0182-00N1 A .737 18.72 .913 23.19 1.048 26.62 1.225 31.12 B (Max.) .600 15.24 .785 19.94 .962 24.43 1.185 30.10 C (Max.) 1.100 27.94 1.250 31.75 1.469 37.31 1.550 39.37 D .879 22.32 1.067 27.10 1.233 31.21 1.550 39.37 T Thread 1/2-20UNF-2A Circular Connectors Shell Size 11/16-24UNEF-2A 13/16-20UNEF-2A 1-28UN-2A C A 3 Protective Covers Shell Size D B Receptacle Part No. With Chain Without Chain Plug Part No. With Chain Without Chain 9 086-0253-00P2 086-0257-00L6 086-0261-00F5 086-0265-00L6 12 086-0254-00P2 086-0258-00L6 086-0262-00F5 086-0266-00L6 15 086-0255-00P2 086-0259-00L6 086-0263-00F5 086-0267-00L6 18 086-0256-00P2 086-0260-00L6 086-0264-00F5 086-0268-00L6 A .813 20.65 1.000 25.40 1.125 28.58 1.594 40.49 Dimensions B C .950 .813 24.13 20.65 1.000 .950 24.13 25.40 .950 1.125 24.13 28.58 .950 1.594 24.13 40.49 D .913 23.19 .913 23.19 .913 23.19 .913 23.19 Plastic Protective Covers also available; consult Tyco Electronics. Modifications We offer a unique modification system which provides alteration of standard MARC 63 Series Connectors to include special finishes, accessories, and custom quality assurance provisions -- processing, testing, serialization, traceability. Consult your sales representative or Tyco Electronics for additional modification information. Standard modifications include: (801): MARC 63 Series Connector, electroless nickel finish (803): MARC 63 Series Connector including cable clamp, straight type (804): MARC 63 Series Connector including cable clamp, rightangle type 77 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors Contacts for MARC 43, MARC 53 and MARC 63 Connectors MARC 43, MD53, MD63 Series .702 [17.83] .452 [11.48] .060-.064 Dia. [1.52-1.63] .030-.032 Dia. [0.76-0.81] Wire Inspection Hole Part Number 083-0009-00R4 (6-1532030-1) 22 AWG Pin MARC RMD53, RMD63 Series .767 [19.48] .505-.525 [12.83-13.33] .515 [13.08] .055-.058 Dia. [1.40-1.47] .051-.055 Dia. [1.30-1.40] .030-.032 Dia. [0.76-.0.81] Wire Inspection Hole Part Number 083-1200-00R4 (4-1532036-8) 22 AWG Pin Wire Inspection Hole .055-.058 Dia. [1.40-1.47] Part Number 082-0461-00Y9 (5-1532030-6) 22 AWG Socket MARC 43, MD53, MD63 Series .702 [17.83] .445-.460 [11.30-11.68] .452 [11.48] .086-.090 Dia. [2.18-2.29] .086-.092 Dia. [2.18-2.34] .061-.063 Dia. [1.55-1.60] Wire Inspection Hole Part Number 083-0158-00R4 (8-1532030-1) 16 AWG Pin Wire Inspection Hole Part Number 082-0113-00T1 (3-1532030-3) 16 AWG Socket MARC 43 Series .702 [17.83] .452 [11.48] .445-.460 [11.30-11.68] .121-.126 Dia. [3.07-3.20] .139-.143 Dia. [3.53-3.63] .139-.143 Dia. [3.53-3.63] .093-.096 Dia. [2.36-2.44] Wire Inspection Hole .121-.126 Dia. [3.07-3.20] Part Number 083-0173-00R4 12 AWG Pin Wire Inspection Hole Part Number 082-0132-00T1 (3-1532030-4) 12 AWG Socket MARC MD53, MD63 Series .702 [17.83] .452 [11.48] .068-.072 Dia. [1.73-1.83] .049-.053 Dia. [1.24-1.35] Wire Inspection Hole .030-.032 Dia. [0.76-0.81] Part Number 083-1435-00R4 (7-1532037-3) 22-20 AWG Pin 78 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors Contacts for MARC 43, MARC 53 and MARC 63 Connectors (Continued) MARC 43, MD53, MD63 Series .451-.462 [11.46-11.73] .060-.064 Dia. [1.52-1.63] .051-.055 Dia. [1.30-1.40] Wire Inspection Hole Part Number 082-0464-00Y9 (5-1532030-7) 22 AWG Socket MARC MD53, MD63 Series .451-.462 [11.46-11.73] .068-.072 Dia. [1.73-1.83] .051-.055 Dia. [1.30-1.40] Wire Inspection Hole Part Number 082-0466-00Y9 22-20 AWG Socket Coaxial Contacts MARC 43, MD53, MD63 Series Circular Connectors Solder Type Coaxial Contacts B B A A CP Type Contact 50 75 95 CS Type Part No. 084-0027-00T2 (5-1532129-8) 084-0024-00T2 (5-1532129-7) 084-0028-00T2 (5-1532129-9) 084-0025-00T2 (7-1532155-0) 084-0029-00T2 (5-1532168-1) Type 084-0026-00T2 CP CS CP CS CP CS A Dia. .109 2.77 .093 2.36 .123 3.12 .106 2.69 .168 4.27 .149 3.78 B .452 11.48 .600 15.24 .452 11.48 .600 15.24 .452 11.48 .600 15.24 3 MARC 43 Series LEPRA/CON Crimp Type, 50 Ohm Coaxial Contacts .600 [15.24] .425 [10.80] .210-.240 [5.33-6.10] Crimp Length .120 [3.05] Crimp Approx. Part Number 142-1500-0001 CS Socket Part Number 141-1500-0001 CP Pin 79 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors Contact Cavity Sealing Plugs Size 22 AWG 16 AWG Part No. Application Description 086-0001-0000 Unsealed 43 Series 086-0009-0000 Sealed 43 Series MD53, RMD53 MD63, RMD63 086-0148-0000 RMD53, RMD63 086-0056-0000 Sealed 43 Series MD53, MD63 086-0010-0000 Sealed 43 Series MD53, MD63 .047-.055 Dia. [1.19-1.40] .447 [11.35] .057-.065 Dia. [1.45-1.65] .421 [10.70] .045-.053 Dia. [1.14-1.35] .940 [23.88] .046-.054 Dia. [1.17-1.37] .940 [23.88] .075-.083 Dia. [1.91-2.11] .421 [10.70] .075-.083 Dia. [1.91-2.11] .452 [11.48] 086-0014-0000 Unsealed 43 Series 086-0057-0000 Sealed 43 Series 086-0015-0000 Unsealed 43 Series 086-0251-0000 .940 [23.88] .140-.148 Dia. [3.56-3.76] 12 AWG 22/20 AWG .086-.094 Dia. [2.18-2.39] .121-.129 Dia. [3.07-3.28] .052-.055 Dia. [1.32-1.40] MD53, MD63 .125-.133 Dia. [3.18-3.38] .447 [11.35] .140-.148 Dia. [3.56-3.76] .940 [23.88] .049-.053 Dia. [1.24-1.35] .069-.073 Dia. [1.75-1.85] Size Part No. 5052 086-0061-0000 7552 086-0062-0000 9552 086-0063-0000 5052 086-0058-0000 7552 086-0059-0000 9552 086-0060-0000 Application Unsealed 43 Series Sealed 43 Series A Dia. .112-.120 2.84-3.05 .135-.143 3.43-3.63 .178-.186 4.52-4.72 .081-.089 2.06-2.26 .106-.114 2.69-2.90 .151-.159 3.84-4.04 B Dia. Description -- A Dia. .388 [9.86] -- -- .112-.120 2.84-3.05 .135-.143 3.43-3.63 .178-.186 4.52-4.72 A Dia. .913 [23.19] 80 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors Assembly Tools MARC 43, 53 and 63 Series Connectors Removal Tool -- None required. Crimp Tools -- Turret style tool (M22520/1-01 and TH88) MICRODOT Part Number 010-0080-0000 -- Crimps all power contacts. Locator Style Tool -- MICRODOT Part Number 010-0070-0000 with locators. Contact Size 22 22 16 Wire Size 22, 24 26 16, 18 Locator 010-0072-0000 010-0087-0000 010-0075-0000 For MARC 43 Series Connector Crimp Coax Contacts Use 010-0132-0000 & 010-0169-0000. MARC 73 Series Connectors Crimp Tool Only Locator Only Part No. 010-3008-0000 010-3009-0000 M22520/2-01 010-3010-0000 Description Crimp Tool w/ Locator Crimp Tool Only Locator Only Part No. 010-3002-0000 010-0190-0000 010-3007-0000 Circular Connectors Description Crimp Tool w/ Locator 3 81 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors MARC 73 Series Connectors Service and Performance Data MARC 73 Series Connectors meet or exceed the performance requirements of specification MIL-C-38999. Your sales representative or field engineer can supply detailed, cross-reference information. MARC 73 Series Connectors meet the following selected test parameters as specified below: DESCRIPTION TEST REQUIREMENTS Contact Retention Contacts are to withstand 10 lbs [44.48 N] axial load without axial displacement in excess of 0.012 [0.30] or damage to contacts or inserts when the axial load is applied to the mating end of the contacts in unmated plugs and receptacles at a rate of approximately 1 lb/sec. [4.45 N]. Contact Resistance The potential drop across normally mated contacts shall not exceed 25 mv under room ambient and high temperature service conditions when measured as specified in MIL C-39029 with maximum rated current. Dielectric Withstanding Voltage, Altitude and Sea Level No evidence of dielectric breakdown or flashover when mated and unmated plugs are subjected to 645 and 180 volts RMS, respectively, at altitudes up to 70,000 feet [21,336 m] and 1000 volts RMS at sea level. Insulation Resistance, Room and High Temp. Insulation resistance of mated plugs and receptacles shall be 5000 megohms, minimum, at room temperature and 1000 megohms, minimum, at 257F [+125C] when measured per MIL-STD 202, Method 302, Test Condition B. Coupling and Uncoupling Plugs and receptacles shall withstand up to 500 cycles of engagement and separation without detrimental damage to plugs or receptacles or not satisfying subsequent tests. Fluid Immersion Mating and unmating forces shall not exceed 27 Ibs [120.10 N] maximum, (15 shell size) after fully wired plugs and receptacles are immersed for 20 hours, each, in hydraulic fluid (MIL-H-5606) and high temperature lubricating oil (MIL-L-9236) followed by a one-hour dry. Sweep Vibration, Mated Mated connectors shall show no circuit interruptions greater than one microsecond during 12 hours vibration to include six sweeps in each axis at extreme temperatures of -85F [-65C] and 257F [+125C] per MIL-STD-202, Method 204, Test Condition D. Post inspection shall show no detrimental cracking, breaking, or loosening of parts. Moisture Resistance The insulation resistance of mated connectors shall exceed 1000 megohms after subjection to moisture resistance testing per MIL-STD-202, Method 106. Altitude Breathing The insulation resistance of wired and mated connectors shall be 5000 megohms, minimum, and there shall be no flashover or breakdown at test voltage of 1000 volts RMS after the third cycle and while immersed in 5% salt water solution at 68F [20C] and room ambient pressure at 68F [20C]. Salt Spray Unmated plugs and receptacles shall show no excessive corrosion which would detrimentally affect the electrical and mechanical performance of the connectors after subjection to 24 hours exposure to salt spray atmosphere per MIL-STD-202, Method 101. 82 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors MARC 73 Series Connectors (Continued) Service and Performance Data I. Electrical -- Electrical Ratings Contact Size 22 AWG 1 Current Rating (Amperes, Max., 81F [+27C]) 5 Dielectric Withstanding Voltage (RMS) 1000 Contact Resistance (Millivolts, Max.) 8 Working Voltage 110,000 Ft. Alt.1 Sea Level 750 300 110,000 ft = 33,528 m Wire Range Accommodations Wire Barrel Size Wire Size (AWG) 22 AWG 26 .029 Min. 0.74 24 -- 22 II. Mechanical -- Durability: 500 Cycles Mate/Unmate. Coupling/Uncoupling Forces and Tightening Torques: O.D. of Finished Wire Range Nominal .031 Nom. 0.79 .036 Nom. 0.91 .042 1.07 Nom. .044 1.12 Max. Wire Spec. MIL-W-16878 Type "E" or "ET" Shell Size 9 12 15 18 Type "ET" Type "ET" Coupling/ Uncoupling Force (In-Lbs.) Max. 10 [44.48] 15 [66.72] 22 [97.86] 28 [124.55] Tightening Torque (In-Lbs.) Mounting Nut Retaining Nut 20 [2.26 N] Max. 20 [2.26 N] Max. 20 [2.26 N] Max. 20 [2.26 N] Max. 30-45 [3.39 Nm - 5.08 Nm] 40-55 [4.52 Nm - 6.21 Nm] 55-70 [6.21 Nm - 7.91 Nm] 70-85 [7.91 Nm - 9.60 Nm] Operating Temperature: -67F to 257F [-55C to +125C]. Connector Mated Length: 2.217 [56.31] Max. MARC 73 Series Connector part numbers indicate size, shape, insert layout, type of seal, style of contact and polarization. Part Number and Ordering Information 06 E 15 91 P N Circular Connectors MD73 (***) Modification Designator when applicable Series -- MD73 Single hole mntng. receptacle 00 Line cord receptacle 01 Box mntng. receptacle 02 Straight plug, bayonet quick disconnect 06 Polarizing position N, 1, 2, 3, 4, etc. . . . P -- Pin power contact S -- Socket power contact Insert arrangement number Shell Size -- O.D. of receptacle barrel to nearest .062 [19.05] inch E -- Environmentally sealed 3 Notes: Pin contacts in plug; socket contacts in receptacle. If P or S does not appear in the numbering system, no contacts will be supplied with order (order separately). Contact Arrangements1 Shell Size 9 Shell Size 12 Shell Size 15 Insert Arrangement 2 Number of Contacts Contact Size 9-273 27 22 AWG 12-613 61 22 AWG 15-913 91 22 AWG 1 2 3 Views shown are front face views of receptacles. Front face view of plug is mirror image of that shown. Arrow ( ) indicates insert top or vertical position in relation to top or vertical position of housing. The 22 AWG contact arrangements will accommodate MIL-W-16878 Type ET, 22, 24, 26 AWG wire. Contact spacing is on 0.065 [1.65] centers. 83 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors MARC 73 Series Connectors (Continued) Configurations Master Polarizing Keyway MD73-06E Straight Plug, Bayonet Coupling, Environmental and Non-Environmental (Mates with Receptacles 02, 00 and 01) A .093 Max. [2.36] B C Shell Size 9 12 15 18 MD73-02E Master Polarizing Key Receptacle, Box Mounting, Environmental and NonEnvironmental (Mates with Plug, Type 06) Dimensions B (Max.) 1.000 25.40 1.000 25.40 1.000 25.40 1.000 25.40 A .813 20.65 1.000 25.40 1.125 28.58 1.594 40.49 C (Max.) 1.288 32.72 1.288 32.72 1.288 32.72 1.288 32.72 .110-.130 Dia. [2.79-3.30] 4 Holes B Typ. C Hex. .052-.072 [1.32-1.83] A Typ. 1.360 [34.54] .093 Max. [2.36] D .065-.085 [1.65-2.16] Panel Cutout .375 [9.53] Max. Panel Thickness Shell Size A .875 22.23 1.000 25.40 1.125 28.58 1.344 34.14 9 12 15 18 B .662 16.81 .786 19.96 .906 23.01 1.062 26.97 Master Polarizing Key MD73-00E Receptacle, Single Hole Mounting, Environmental and Non-Environmental (Mates with Plug, Type 06) B Hex. Dimensions C .562 14.27 .75 19.05 .875 22.23 1.125 28.58 D .693-.697 17.60-17.70 .881-.885 22.38-22.48 1.006-1.011 25.55-25.68 1.250-1.260 31.75-32.00 .125 [3.18] A Hex. F Hex. T Thread C D .093 Max. [2.36] E Panel Cutout Shell Size 9 12 15 18 A .813 20.65 1.000 25.40 1.125 28.58 1.625 41.28 B .75 19.05 .937 23.80 1.062 26.97 1.375 34.93 C 1.360 34.54 1.360 34.54 1.360 34.54 1.360 34.54 Dimensions D .669-.673 16.99-17.09 .850-.856 21.59-21.74 .975-.979 24.77-24.87 1.212-1.216 30.78-30.89 E .693-.697 17.60-17.70 .881-.885 22.38-22.48 1.006-1.010 25.55-25.65 1.251-1.255 31.78-31.88 F .562 14.27 .75 19.05 .875 22.23 1.125 28.58 T (Class 2A) 11/16-32UN 7/8-28UN 1-28UN 1-1/4-28UN 84 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors MARC 73 Series Connectors (Continued) Configurations (Continued) Master Polarizing Key MD73-01E Receptacle, Line Cord, Environmental (Mates with Plug, Type 06) C Hex. B .093 Max. [2.36] A Shell Size Dimensions B (Max.) .703 17.86 .891 20.57 1.016 25.81 1.203 30.56 A 1.360 34.54 1.360 34.54 1.360 34.54 1.360 34.54 9 12 15 18 Accessories C .562 14.27 .75 19.05 .875 22.23 1.125 28.58 T Thread Cable Clamps B .225 Max. [5.72] Shell Size Clamp Part No. 9 086-0341-00N1 12 086-0342-00N1 15 086-0343-00N1 18 086-0344-00N1 A .704 17.88 .773 19.63 .829 21.06 .890 22.61 T Thd. 2A 1/2-20 UNF 11/16-24 UNEF 13/16-20 UNEF 1-28 UN 3 C .156 [3.96] .225 Max. [5.72] B .750 19.05 .932 23.67 1.078 27.38 1.250 31.75 Circular Connectors .156 [3.96] A B D T Thread A Shell Size Clamp Part No. 9 086-0337-00N1 12 086-0338-00N1 15 086-0339-00N1 18 086-0340-00N1 A .737 18.72 .913 23.19 1.048 26.62 1.225 31.12 B (Max.) .600 15.24 .785 19.94 .962 24.43 1.185 30.10 C (Max.) 1.100 27.94 1.250 31.75 1.469 37.31 1.550 39.37 D .879 22.33 1.067 27.10 1.233 31.32 1.550 39.37 T Thd. 2A 1/2-20 UNF 11/16-24 UNEF 13/16-20 UNEF 1-28 UN 85 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors MARC 73 Series Connectors (Continued) Accessories (Continued) Contacts Twist pin -- 22 Pins and Sockets Copper alloy plated .000050 [0.00127] gold over copper flash per MIL-G-45204, Type II Rating -- 5 amps Contact Resistance -- .008 ohms max. .415 [10.54] .034 Dia. [0.86] .050 Dia. [1.27] .680 [17.27] .042 Dia. [1.07] .250 [6.35] .035 Dia. [0.89] .250 [6.35] .030 Dia. [0.76] .050 Dia. [1.27] .030-.032 Dia. [0.76-0.81] Part Number 096-0526-0000 Part Number 096-0626-0001 Engineering/Separation Forces -- 6 oz. [1.67 N] max. / .502 [.139 N] min. Durability -- 2000 cycles Contact Cavity Sealing Plugs .437 [11.10] .800 [20.32] .264 [6.71] .035-.041 [0.89-1.04] Part Number 086-0331-0000 Contact Size 22 AWG .264 [6.70] .036-.044 [0.91-1.10] Part Number 086-0330-0000 Sealing Plug 086-0331-0000 Filler Plug 086-0330-0000 Note: Sealing plug occupies insert and grommet cavities. Filler plug occupies insert cavity only. 86 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors MQR Series -- Microminiature Circular Connectors MQR stands for MICRODOT Quick Release. This line of circular quick disconnect connectors has metal shells with push-pull couplings which provide a positive connection for rugged environmental use. The MQR series is specified for cable-to-cable and cableto-panel applications. "active" or "live", the pins require the physical protection that the receptacle side offers. (Similar to a "protected" or "shrouded" header.) The plug connector side contains socket contacts. The receptacle connector side contains pin contacts. Because the pin contact is MQR connectors are manufactured to the performance specifications of MIL-DTL-83513. How to Specify/ Ordering Code While there is no optional hardware for the MQR series, the receptacles incorporate a standard jam nut to tighten the connector down to the board or panel. S -- Solder pot X -- Special, Does not fit description. MQR A 37 P 6 A 1 18.0 Length in Inches (Min.) Connector Series Insulation Color or Finish Shell, Material & Finish Number of Contacts** Wire Type 7, 19, 37* Shell Per MIL-W-16878 P -- Plug (Socket Contact) F -- Receptacle, Front Panel Mount (Pin Contact) R -- Receptacle, Rear Panel Mount (Pin Contact) *uses twist pin contacts ** Other non-standard sizes are also available, contact Tyco Electronics for details. 7 19 37 A (Hex) .500 12.7 .625 15.88 .812 20.62 B (Min.) .361 9.17 .477 12.16 .722 18.39 Dimensions O C (Min.) .376 9.55 .501 12.73 .751 19.07 { A -- Type E, 7 strand B -- Type ET, 7 strand C -- Type E, 19 strand D -- Type ET, 19 strand F -- 7 strand per MIL-W-22759/11 (28 AWG only) G -- 19 strand per MIL-C-22759/11 26 AWG, 24 AWG L -- Copper, solid Q -- Stranded per MIL-W-22759/33 3 Wire Size 4 -- 24 AWG 5 -- 25 AWG 6 -- 26 AWG 8 -- 28 AWG 0 -- 30 AWG Key Front Panel Mount (MQR Receptacle) Size Circular Connectors 1 -- All white 6 -- Bare (unfinished) 2 -- All yellow 7 -- Color coded per MIL-STD-681, System I 3 -- All gray 9 -- 10 Solid color repeating (starts with black) 4 -- Gold plated 5 -- Tin dipped gold plated A -- Aluminum, Electroless Nickel Finish B -- Brass, Sulfamate Nickel Finish D Thd. 3/8-32 UNEF-2A A Hex. 1/2-28 UNEF-2A 3/4-20 UNEF-2A D Thd. .400 [10.16] B Min. OC Min. Mounting Hole For Front Panel Mount Front Panel Mount (19 Position Shown) 87 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors MQR Series -- Microminiature Circular Connectors (Continued) Rear Panel Mount (MQR Receptacle) Size 7 19 37 A (Hex) .500 12.7 .687 17.45 .812 20.62 B (Min.) .422 10.72 .531 13.49 .722 18.39 Dimensions O C (Min.) .440 11.18 .564 14.33 .751 19.07 .050 Typ. [1.27] .025 Typ. [0.64] D Thd. Key 7/16-28 UNEF-2A A Hex. 9/16-24 UNEF-2A .0433 Typ. [1.10] 3/4-20 UNEF-2A .036 .005 Typ. [0.91 0.13] D Thd. B Min. .250 [6.35] L Min. OC Min. Mounting Hole For Rear Panel Mount Rear Panel Mount (19 Position Shown) Circular MQR Series Quick Release Receptacle 7 Position (Stamped Pin) 19 Position (Stamped Pin) 37 Position (Twist Pin) 2 2 1 2 7 3 4 3 13 17 9 7 10 15 12 16 22 16 23 29 8 5 4 5 4 6 3 1 1 19 28 33 37 34 18 35 36 Circular MQR Series Quick Release Plug .130-.144 Typ. [3.30-3.66] .050 Typ. [1.27] .025 Typ. [0.64] Keyway MQR Plug Size 7 19 37 Dimensions OB OA .375 .300 9.53 7.62 .400 .475 12.07 10.16 .750 .630 19.05 16.00 OA OB .795 [20.19] .0433 Typ. [1.10] L Min. Plug (19 Position Shown) 7 Position 19 Position 37 Position 3 2 1 7 3 2 6 7 3 5 4 1 12 8 16 13 17 18 5 9 4 19 2 4 1 15 10 22 16 23 29 28 33 34 37 36 35 88 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors MTC Series -- Microminiature Circular Connectors How to Specify/ Ordering Code X -- Special, Does not fit description. MTC 19 P 6 A 1 18.0 Length in Inches (Min.) MICRODOT Threaded Coupling Series Insulation Color or Finish Number of Contacts 1 -- All white 6 -- Bare (unfinished) 2 -- All yellow 7 -- Color coded per MIL-STS-681, System I 3 -- All gray 9 -- 10 Solid color repeating (starts with black) 4 -- Gold plated 5 -- Tin dipped gold plated 9, 19 Contact Type P -- Twist Pin (Plug) S -- Socket (Receptacle) Wire Type Per MIL-W-16878 { A -- Type E, 7 strand B -- Type ET, 7 strand C -- Type E, 19 strand D -- Type ET, 19 strand F -- 7 strand per MIL-W-22759/11 (28 AWG only) G -- 19 strand per MIL-C-22759/11 (26 AWG and 24 AWG only) L -- Copper, solid Q -- Stranded per MIL-W-22759/33 Wire Size 4 -- 24 AWG Material and Finish 5 -- 25 AWG 6 -- 26 AWG 8 -- 28 AWG 0 -- 30 AWG MTC Series Plug Size Dimensions OB .456 11.58 .545 13.84 OA .227 5.77 .308 7.82 9 19 C Thd. M10 x 0.75 19.05 M12 x 1 25.40 Circular Connectors Shell -- Aluminum, nickel plated Contact -- Copper alloy, gold plated Insulator -- RYTON Key 3 OB .036 .005 Typ. [0.91 0.13] 9 Position 19 Position OA 2 9 1 8 3 7 C Thd. .800 [20.32] 3 2 4 6 5 1 7 4 12 8 16 13 19 18 17 L Min. MTC Series Plug (19 Position Shown) 89 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors MTC Series -- Microminiature Circular Connectors (Continued) MTC Series Receptacle Size 9 19 OA .562 14.27 .625 15.88 B Hex. .500 12.70 .625 15.88 Dimensions C Thd. M10 x 0.75 19.05 M12 x 1 25.40 D Min. .370 9.40 .445 11.30 O E Min. .394 10.01 .474 12.04 Keyway 9 Position 19 Position 2 2 1 1 9 3 8 3 4 7 8 4 7 5 B Hex. 12 13 6 16 17 19 18 C Thd. .130-.144 Typ. [3.30-3.66] .900 [22.86] OE D L Min. Panel Cut Out OA MTC Series Receptacle (19 Position Shown) 90 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors Introduction Product Facts n n n n n n Designed to accept 50, 70 and 93 ohm miniature coaxial cables Three types of connectors: Screw-on Series, Slide-on Series and Quick-Connect Series Temperature range -- -85F to +257F [-65C to +125C] (with neoprene gasket or bend relief cap) -80F to 392F [-62C to +200C] (with silicone gasket or bend relief cap) Dielectric Withstanding Voltage -- 1000 volts RMS at sea level Contact Resistance -- 3 milliohms max., D.C. Captive Contacts -- Terminated connector contacts captivated from movement in both directions the Gold Plated Crimp Style Coaxial Connector Series and offers the dependability of a threaded coupling. For enhanced safety, choose connectors with wire holes. The Quick-Connect Series offers the convenience of Slide-On coupling with added retention provided by a snap ring located on the jack/receptacle side. Choose Slide-On Series for the fastest, most convenient mating and unmating. Consult Tyco Electronics for special cable accommodations and mounting features. Coaxial Connectors MICRODOT Standard Coaxial Connectors are designed to accept 50, 70, and 93 Ohm miniature coaxial cables. These connectors are available as Screw-On Series, Slide-On Series, or Quick-Connect Series. The Screw-On Series is intermateable with 4 91 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors Standard Connectors Performance Data Summary For Standard Connectors Mechanical Captive Contacts -- Terminated connector contacts captivated from movement in both directions. Cable Retention -- 50 Ohm connectors, 15 lb. min.1 70 Ohm connectors, 25 lb. min.1 93 Ohm connectors, 35 lb. min.1 Recommended Coupling Torque (Threaded Interface) -- 8 inch/pounds max. Recommended Receptacle Mounting Torque (All Series) -- 8 inch/pounds max. Unmating Force (Slide-On Series) -- 1-7 pounds. Contact Protection (Unmated) -- Pin contact protected by coupling nut (threaded series)2 or by housing (QuickConnect and Slide-On Series). Socket protected by insulator and housing. Assembly Methods Straight Plugs & Jacks -- Cable Inner Conductor: Soldered to contact. Cable Shield: Crimped to jerk ring (solder optional). Angle Plugs -- Cable Inner Conductor: Soldered to contact. Cable Shield: Soldered to ring & housing. Vibration3,4 -- MIL-STD-202, Method 204, Test condition B (15 G peak). No physical damage or electrical discontinuities in excess of 1 microsecond. Shock3,4 -- MIL-STD-202, Method 213, Test Condition H. No physical damage or electrical discontinuity after shock. Thermal Shock -- MIL-STD-202, Method 107, Test Condition B. Moisture Resistance3 -- MIL-STD202, Method 106. Salt Spray3 -- MIL-STD-202, Method 101, Test Condition B (48 hours). Electrical Impedance -- Designed to be compatible with 50, 70, or 93 Ohm miniature coaxial cable. Dielectric Withstanding Voltage -- 1000 volts RMS at sea level. Contact Resistance -- 3 milliohms max., D.C. Current Capacity -- 3 amps, D.C. Insulation Resistance -- 5 x 103 Megohms min. @ 500 volts D.C. Voltage Standing Wave Ratio5 (VSWR) -- Typical 50 Ohm series, 1.2 max. to 2 GHz. Materials Environmental Temperature Range (Continuous Service) -- -85F to +257F [-65C to +125C] (with Neoprene gasket or bend relief cap). -80F to 392F [-62C to +200C] (with Silicone gasket or bend relief cap). Housing, Nut, Jerk Ring -- Brass per ASTM-B-16. Insulator -- TEFLON per ASTM-D-1710. Pin Contact (Plugs) -- Brass per ASTM-B-16. Socket Contact (Jacks & Receptacles) -- Beryllium Copper per ASTM-B-196. Bend Relief Caps (Plugs & Jacks) -- Neoprene or Silicone Rubber per ZZ-R-765. Gaskets (Jacks & Receptacles) -- Neoprene or Silicone Rubber per ZZ-R-765. Lockwasher -- #425 Bronze Alloy. Plating Contacts -- Gold per MIL-G-45204, Type II, Grade C, Class 1. Housing, Nut, Jerk Ring, Lockwasher -- Silver per QQ-S-365, Type II, Grade A, .0002 [.005] min. Notes: 1 Termination to cables with foamed dielectrics excluded. Straight connector jerk rings must be soldered to cable shield. 2 Pin protector required. See individual connector specifications. 3 Screw-On Series, threaded interface. 4 Tyco Electronics recommends the use of safety wired connectors in vibration and shock environment. See individual specifications for connectors with safety wire holes. 5 VSWR is a system specification. Where performance is critical, purchase Tyco Electronics cable assemblies with Screw-On or Quick-Connect Series connectors and specify VSWR testing and mating connector part number. 92 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors Standard Connectors -- Screw-On Series See page 128 for mating options. Jack S-50 Ohm Series 031-0034-0001 051-0467-0001 S-70 Ohm Series 031-0036-0001 031-0090-0001 S-93 Ohm Series 031-0037-0001 031-0088-0001 S-70 Ohm Series 031-0048-0001 S-93 Ohm Series 031-0032-0001 031-0089-0001 S-70 Ohm Series 031-0051-0001 S-93 Ohm Series 031-0052-0001 S-70 Ohm Series 031-0017-0001 031-0018-0001 S-93 Ohm Series 031-0016-0001 031-0019-0001 031-0046-0001 Plug S-50 Ohm Series 032-0021-0001 032-0023-0001 032-0025-0001 032-0033-0001 032-0097-0001 032-0098-0001 032-0155-0001 032-0156-0001 052-0213-0001 052-0235-0001 052-0235-0003 052-0370-0001 052-0542-0001 S-70 Ohm Series 032-0010-0001 032-0022-0001 032-0067-0001 032-0078-0001 032-0222-0001 052-0092-0001 S-93 Ohm Series 032-0011-0001 032-0017-0001 032-0066-0001 032-0071-0001 032-0092-0001 032-0099-0001 052-0200-0001 Bulkhead Jack S-50 Ohm Series 031-0033-0001 Receptacle S-50 Ohm Series 031-0050-0001 051-0318-0001 Right-Angle Plug S-50 Ohm Series 032-0015-0001 052-0204-0001 052-0215-0001 052-0337-0001 S-70 Ohm Series 032-0013-0001 052-0299-0001 052-0379-0001 S-93 Ohm Series 032-0014-0001 032-0068-0001 032-0153-0001 052-0207-0001 052-0298-0001 052-0304-0022 Coaxial Connectors Receptacle S-50 Ohm Series 031-0001-0001 031-0001-0003 031-0002-0001 031-0003-0001 031-0024-0001 051-0125-0001 4 Printed Circuit Receptacle S-50 Ohm Series 031-0059-0001 031-0062-0001 051-0450-0001 S-70 Ohm Series 031-0069-0001 Right-Angle Printed Circuit Receptacle S-93 Ohm Series 031-0067-0001 031-0080-0001 S-50 Ohm Series 031-0061-0001 051-0459-0001 S-70 Ohm Series 031-0072-0001 S-93 Ohm Series 031-0073-0001 93 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors Standard Connectors -- Screw-On Series (Continued) Plugs A S-50, 70 & 93 B .030-.033 Pin [.762-.838] Part No. Dim. A Dim. B Instruction Sheet No. Former MICRODOT I.S. No. Assembly Tool 1 408-08521 RF-ASMB-88 010-0003-0000 1 Cable Jacket Max. S-50 Series (50 Ohm) .190 [4.83] -32 UNF-2B Thread .745 .230 032-0021-0001 5.84 Dia. 18.92 .230 .745 032-0023-0001 5.84 Dia. 18.92 .230 .745 032-0025-0001 18.92 5.84 Dia. .745 .230 032-0033-0001 5.84 Dia. 18.92 .250 .745 032-0097-0001 6.35 Hex. 18.92 .250 .745 032-0098-0001 18.92 6.35 Hex. .700 .250 032-0155-0001 17.78 6.35 Hex. .700 .250 Dia. 032-0156-0001 17.78 6.35 .745 .250 Hex. 052-0213-0001 18.92 6.35 .745 .250 Hex. 052-0235-0001 18.92 6.35 .745 .250 Hex. 052-0235-0003 18.92 6.35 .745 .250 Hex. 052-0370-0001 18.92 6.35 .745 .250 Hex. 052-0542-0001 18.92 6.35 S-70 Series (70 Ohm) .216 [5.49] -32 UNEF-2B Thread .760 .255 Dia. 032-0010-0001 19.30 6.48 .760 .255 Dia. 032-0022-0001 19.30 6.48 .755 .255 032-0067-0001 19.18 6.48 Dia. .755 .255 032-0078-0001 19.18 6.48 Dia. .760 .281 Hex. 032-0222-0001 19.30 7.14 .255 .760 052-0092-0001 19.30 6.48 Dia. S-93 Series (93 Ohm) .250 [6.35] -32 UNEF-2B Thread .320 .760 032-0011-0001 19.30 8.13 Dia. .760 .320 Dia. 032-0017-0001 19.30 8.13 .950 .350 032-0066-0001 24.13 8.89 Dia. .760 .320 032-0071-0001 19.30 8.13 Dia. .320 .760 032-0092-0001 19.30 8.13 Dia. .760 .312 032-0099-0001 7.92 Hex. 19.30 .312 .760 052-0200-0001 19.30 7.92 Hex. .087 2.21 .087 2.21 .093 2.36 .093 2.36 .087 2.21 .087 2.21 .088 2.24 .088 2.24 .087 2.21 .087 2.21 .087 2.21 .093 2.36 .087 2.21 .093 2.36 .093 2.36 .108 2.74 .108 2.74 .093 2.36 .093 2.36 .134 3.40 .134 3.40 .154 3.91 .134 3.40 .155 3.94 .134 3.40 .134 3.40 Pin Protector Special Features Solderless Assembly 408-08522 RF-ASMB-89 010-0003-0000 1 408-08521 RF-ASMB-88 010-0003-0000 1 408-08522 RF-ASMB-89 010-0003-0000 1 Solderless Assembly, Hex Nut 408-08521 RF-ASMB-88 010-0003-0000 Hex Nut 408-08522 RF-ASMB-89 010-0003-0000 Hex Nut, .187 [4.75] Hex Cable Clamp Nut 1, 2 .187 [4.75] Hex Cable Clamp Nut 1 Solderless, Hex Nut w/ Safety Wire Holes, .021 [0.53] Wire Max. 408-08522 RF-ASMB-89 010-0003-0000 408-08522 RF-ASMB-89 010-0003-0000 408-08521 RF-ASMB-88 010-0003-0000 408-08522 RF-ASMB-89 010-0003-0000 Solderless Assembly 1, 2 Hex Nut 1, 2 Hex Nut w/ Safety Wire Holes, .021 [0.53] Wire Max. 1 Hex Nut, Designed for Dual Shield Cable 408-08522 RF-ASMB-89 010-0003-0000 408-08522 RF-ASMB-89 010-0003-0000 Hex Nut 408-08522 RF-ASMB-89 010-0003-0000 1 Solderless Assembly 408-08521 RF-ASMB-88 010-0004-0000 1 408-08525 RF-ASMB-95 010-0004-0000 1 408-08522 RF-ASMB-89 010-0035-0000 Solderless Assembly 408-08521 RF-ASMB-88 010-0035-0000 Hex Nut w/ Safety Wire Holes, .014 [0.35] Wire Max. 408-08525 RF-ASMB-95 010-0004-0000 408-08525 RF-ASMB-95 010-0004-0000 1 408-08521 RF-ASMB-88 010-0005-0000 1 408-08525 RF-ASMB-95 010-0005-0000 1 Silicone Bend Relief Cap 408-08523 RF-ASMB-90 -- Cable Inner Conductor, .031 [0.78] Max. 408-08525 RF-ASMB-95 010-0005-0000 1 408-08525 RF-ASMB-95 010-0044-0000 Hex Nut 408-08525 RF-ASMB-95 010-0005-0000 Hex Nut w/ Safety Wire Holes, .015 [0.38] Wire Max. 408-08525 RF-ASMB-95 010-0005-0000 1, 2 1 1 1 2 Solderless Assembly 1 1 1 Pin protected. Hole in ferrule permits soldering to clamp ring and shield for increased cable pullout strength. 1 2 94 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors Standard Connectors -- Screw-On Series (Continued) Right-Angle Plugs B S-50, 70 & 93 C ANGLE PLUG A Part No. Dim. A Dim. B S-50 Series (50 Ohm) .190 [4.83] -32 UNF-2B Thread .735 .225 Dia. 032-0015-0001 18.67 5.72 .735 .250 052-0204-0001 18.67 6.35 Hex. 052-0215-0001 .735 18.67 .250 6.35 Hex. .225 .745 18.92 5.72 Dia. S-70 Series (70 Ohm) .216 [5.49] -32 UNEF-2B Thread .745 .255 Dia. 032-0013-0001 18.92 6.48 052-0337-0001 052-0299-0001 .745 18.92 .281 7.14 Hex. .745 .281 Hex. 18.92 7.14 S-93 Series (93 Ohm) .250 [6.35] -32 UNEF-2B Thread .745 .320 Dia. 032-0014-0001 18.92 8.13 .745 .320 Dia. 032-0068-0001 18.92 8.13 .745 .312 Hex. 032-0153-0001 18.92 7.92 .745 .312 Hex. 052-0207-0001 18.92 7.92 052-0379-0001 Dim. C Cable Jacket Max. .570 14.48 .570 14.48 .092 2.34 .092 2.34 Instruction Sheet No. Former MICRODOT I.S. No. Assembly Tool 408-08520 RF-ASMB-87 010-0016-0000 Hex Nut 408-08520 RF-ASMB-87 010-0016-0000 408-08520 RF-ASMB-87 010-0016-0000 408-08520 RF-ASMB-87 010-0016-0000 Special Features .570 14.48 .092 2.34 Hex Nut w/ Safety Wire Holes, .021 [.533] Wire Max. .570 14.48 .111 2.82 Dual Shield Cable .570 14.48 .111 2.82 RF-ASMB-87 010-0016-0000 408-08520 RF-ASMB-87 010-0016-0000 408-08520 RF-ASMB-87 010-0016-0000 408-08520 RF-ASMB-87 010-0017-0000 408-08520 RF-ASMB-87 010-0017-0000 Hex Nut 408-08520 RF-ASMB-87 010-0017-0000 Hex Nut 408-08520 RF-ASMB-87 010-0017-0000 408-08520 RF-ASMB-87 010-0017-0000 408-08520 RF-ASMB-87 010-0017-0000 .570 14.48 .111 2.82 .570 14.48 .111 2.82 Hex Nut .630 16.00 .630 16.00 .630 16.00 .630 16.00 .134 3.40 .155 3.94 .155 3.94 .134 3.40 052-0298-0001 .745 18.92 .312 Hex. 7.92 .630 16.00 .134 3.40 052-0304-0022 .745 18.92 .312 Hex. 7.92 .630 16.00 .155 3.94 Hex Nut w/ Safety Wire Holes, .015 [.381] Wire Max. Hex Nut w/ Safety Wire Holes, .015 [.381] Wire Max., Silicone Bend Relief Cap Coaxial Connectors 408-08520 Hex Nut w/ Safety Wire Holes, .014 [.355] Wire Max. 4 95 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors Standard Connectors -- Screw-On Series (Continued) Jacks S-50, 70 & 93 .400 [10.16] B Max. Panel A .375 Hex. [9.52] OB .375 Hex. [9.52] Mounting Nut Fig. Dim. A S-50 Series (50 Ohm) .190 [4.83] -32 UNF-2A Thread .870 2 031-0033-0001 22.10 .750 031-0034-0001 1 19.05 .720 051-0467-0001 1 18.30 S-70 Series (70 Ohm) .216 [5.49] -32 UNEF-2A Thread .760 031-0036-0001 1 19.30 .880 031-0048-0001 2 22.35 .760 031-0090-0001 1 19.30 S-93 Series (93 Ohm) .250 [6.35] -32 UNEF-2A Thread .880 031-0032-0001 2 22.35 .760 031-0037-0001 1 19.30 1.000 031-0088-0001 1 25.40 .750 031-0089-0001 2 19.05 O .313 Min. [7.95] Lock Washer Fig. 1 Part No. .292 Min. [7.42] Fig. 2 Dim. B Cable Jacket Max. .140 3.56 .235 5.97 .235 5.97 .088 2.24 .087 2.21 .079 2.01 .255 6.48 .140 3.56 .255 6.48 .155 3.94 .320 8.13 .320 8.13 .140 3.56 Mounting Hole Instruction Sheet No. Former MICRODOT I.S. No. Assembly Tool 408-08522 RF-ASMB-89 010-0003-0000 408-08522 RF-ASMB-89 010-0003-0000 408-08522 RF-ASMB-89 010-0003-0000 .093 2.36 .093 2.36 .109 2.77 408-08522 RF-ASMB-89 010-0004-0000 408-08525 RF-ASMB-95 010-0004-0000 408-08522 RF-ASMB-89 010-0035-0000 .134 3.40 .134 3.40 .154 3.91 .154 3.91 408-08525 RF-ASMB-95 010-0005-0000 408-08525 RF-ASMB-95 010-0005-0000 408-08533 RF-ASMB-106 -- 408-08524 RF-ASMB-92 -- Special Features Hex Collet Cable Clamp No Mounting Flat, Hex Nut Cable Clamp 96 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors Standard Connectors -- Screw-On Series (Continued) Receptacles A A B Max. Panel B Max. Panel E O Min. C C D Hex. D Hex. F Min. Solder Pot Turret Mounting Nut Solder Lug Solder Lug Mounting Nut Fig. 1 Fig. 2 A A B .245 [6.22] B C Mounting Hole for Fig. 1 & 2 .100 .005 [2.54 .127] Typ. D .200 .005 [5.08 .127] Typ. C O .055 Min. [1.40] Typ. O .037 Typ. [.940] O .037 Typ. [.940] Fig. 3 Mounting Pattern for Fig. 3 & 4 Dim. C Dim. D Dim. E Dim. F .187 Wrench Flats 4.75 .187 Wrench Flats 4.75 .187 4.75 Wrench Flats .187 4.75 Wrench Flats .344 Wrench Flats 8.74 .250 6.35 Hex. .330 8.38 Dia. .330 8.38 Dia. .250 6.35 .250 6.35 .250 6.35 -- No Mounting Flat -- No Mounting Flat -- No Mounting Flat -- No Nut or Solder Lug, Threads into Panel .438 11.13 .250 4.75 .191 4.85 .191 4.85 .191 4.85 .190 -32 4.83 .345 8.76 .191 4.85 -- Housing Isolated by Nylon Insulator .173 4.39 -- -- -- .480 12.20 -- -- -- -- -- -- .250 4.75 .138 3.50 .191 4.85 .173 4.39 Fig. .330 8.38 Dia. .187 Wrench Flats 4.75 .250 Hex. 6.35 .330 8.38 Dia. -- -- Special Features No Mounting Thread, Solder or Press into Panel w/ Safety Wire Holes, .014 [.355] Wire Max. -- -- -- .330 Dia. 8.38 .480 12.20 -- -- 3 Outer Legs .250 6.35 .250 6.35 .250 6.35 .330 8.38 .330 8.38 .217 5.51 .217 5.51 .217 5.51 -- No Mounting Flat -- No Mounting Flat Hex. .281 7.14 .281 7.14 .281 7.14 .197 5.00 Dia. -- -- -- Dia. .480 12.20 -- -- Hex. Hex. Coaxial Connectors Dim. Dim. A B S-50 Series (50 Ohm) .190 [4.83] -32 UNF-2A Thread .515 .080 031-0001-0001 2 13.08 2.03 .510 .110 031-0001-0003 2 12.95 2.80 .515 .150 031-0002-0001 2 13.08 3.81 .255 -- 031-0003-0001 2 6.48 .555 .120 031-0024-0001 2 14.10 3.05 .605 .160 031-0050-0001 1 15.37 4.06 .340 .155 031-0059-0001 3 8.64 3.93 .425 .155 4 031-0061-0001 10.80 3.93 .345 .250 031-0062-0001 3 8.76 6.35 .315 .125 051-0125-0001 2 3.18 8.00 .605 .160 051-0318-0001 1 15.37 4.06 .050 .340 051-0450-0001 3 8.64 1.27 .425 .155 051-0459-0001 4 10.80 3.93 S-70 Series (70 Ohm) .216 [5.49] -32 UNEF-2A Thread .555 .100 031-0017-0001 2 14.10 2.54 .555 .160 031-0018-0001 2 14.10 4.06 .605 .160 031-0051-0001 1 4.06 15.37 .340 .155 3 031-0069-0001 3.94 8.64 .155 .425 4 031-0072-0001 10.80 3.94 Part No. Fig. 4 4 97 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors Standard Connectors -- Screw-On Series (Continued) Receptacles (Continued) Dim. Dim. A B S-93 Series (93 Ohm) .250 [6.35] -32 UNEF-2A Thread .100 .555 031-0016-0001 2 2.54 14.10 .160 .555 2 031-0019-0001 14.10 2.54 .555 .120 2 031-0046-0001 3.05 3.05 .160 .605 031-0052-0001 1 15.37 2.54 .340 .155 3 031-0067-0001 3.94 8.64 .425 .155 4 031-0073-0001 3.94 10.80 .250 .345 031-0080-0001 3 8.76 6.35 Part No. Dim. C Dim. D Dim. E .312 7.92 Hex. .312 7.92 Hex. .345 Wrench Flats 8.76 .312 Hex. 7.92 .330 8.38 Dia. .330 8.38 Dia. .330 Dia. 8.38 .312 7.92 .312 7.92 .438 11.13 .312 7.92 .251 6.38 .251 6.38 .345 8.76 .251 6.38 .232 5.89 Fig. Dim. F Special Features -- No Mounting Flat -- No Mounting Flat -- Housing Isolated by Nylon Insulator -- -- -- .480 12.20 -- -- -- -- -- 98 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors Standard Connectors -- Slide-On Series All plugs shown below mate with all jacks/receptacles shown below. Jack SOS-50 Ohm Series 031-0053-0001 SOS-70 Ohm Series 031-0095-0001 SOS-93 Ohm Series 031-0063-0001 031-0093-0001 Plug SOS-50 Ohm Series 032-0055-0001 SOS-70 Ohm Series 032-0060-0001 032-0087-0001 SOS-93 Ohm Series 032-0077-0001 032-0084-0001 Bulkhead Jack SOS-50 Ohm Series 031-0054-0001 SOS-70 Ohm Series SOS-93 Ohm Series 031-0064-0001 031-0094-0001 SOS-70 Ohm Series 031-0049-0001 051-0258-0001 051-0325-0001 SOS-93 Ohm Series 031-0049-0001 051-0258-0001 051-0325-0001 Right-Angle Plug SOS-50 Ohm Series 032-0063-0001 SOS-70 Ohm Series 032-0062-0001 SOS-93 Ohm Series 032-0059-0001 032-0083-0001 Receptacle SOS-50 Ohm Series 031-0049-0001 051-0258-0001 051-0325-0001 Coaxial Connectors Plug Receptacle SOS-50 Ohm Series 032-0042-0001 052-0061-0001 052-0471-0001 SOS-70 Ohm Series 032-0042-0001 052-0061-0001 052-0471-0001 SOS-93 Ohm Series 032-0042-0001 052-0061-0001 052-0471-0001 Right-Angle Printed Circuit Receptacle SOS-50 Ohm Series 031-0070-0001 SOS-70 Ohm Series 031-0070-0001 SOS-93 Ohm Series 031-0070-0001 4 Bulkhead Plug SOS-50 Ohm Series 032-0056-0001 Printed Circuit Receptacle SOS-70 Ohm Series 032-0061-0001 SOS-93 Ohm Series 032-0058-0001 SOS-50 Ohm Series 031-0060-0001 031-0065-0001 SOS-70 Ohm Series 031-0060-0001 031-0065-0001 SOS-93 Ohm Series 031-0060-0001 031-0065-0001 99 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors Standard Connectors -- Slide-On Series (Continued) Straight Plugs A C Max. Panel .290 [7.37] A D Hex. B Hex. OB Contact Tail Mounting Nut Solder Lug Fig. 1 Fig. 2 Plug Receptacle A .500 [12.70] C Max. Panel OE Min. Hex. B Hex. Mounting Nut Lock Washer Fig. 3 Bulkhead Plug Part No. Fig. Mounting Hole for Fig. 2 & 3 Dim. A Dim. B Dim. C Dim. D Dim. E Cable Max. Jacket Special Features Instruction Sheet No. Former MICRODOT I.S. No. Assembly Tool .705 17.91 .870 22.10 .950 24.13 .750 19.05 .590 14.99 .250 6.35 .250 6.35 .375 9.53 .250 6.35 .250 6.35 .160 4.06 .281 7.14 .217 5.51 -- Turret Pin Contact Tail -- -- -- -- -- -- 408-08526 RF-ASMB-97 010-0007-0000 .145 3.68 .160 4.06 .095 2.41 .375 9.53 .281 7.14 .281 7.14 .313 7.95 .217 5.51 .217 5.51 .088 2.24 .088 2.24 408-08526 RF-ASMB-97 010-0007-0000 -- -- -- -- -- -- .705 17.91 .880 22.35 .960 24.38 .880 22.35 .750 19.05 .590 14.99 .250 6.35 .250 6.35 .375 9.53 .250 6.35 .250 6.35 .250 6.35 .160 4.06 .281 7.14 -- -- -- -- 408-08529 RF-ASMB-102 010-0007-0000 .145 3.68 408-08526 RF-ASMB-97 010-0007-0000 408-08526 RF-ASMB-97 010-0036-0000 -- -- -- -- -- -- .705 17.91 .960 24.38 .880 22.35 1.06 26.92 .750 19.05 .590 14.99 .250 6.35 .375 9.53 .250 6.35 .250 6.35 .250 6.35 .250 6.35 -- -- -- 408-08529 RF-ASMB-102 010-1008-0000 408-08529 RF-ASMB-102 010-1008-0000 408-08523 RF-ASMB-90 -- -- -- -- -- -- -- SOS-50 Series (50 Ohm) 032-0042-0001 032-0055-0001 032-0056-0001 2 1 3 052-0061-0001 2 052-0471-0001 2 -- Solder Pot Contact Tail Straight Pin Contact Tail1 .217 5.51 -- Turret Pin Contact Tail -- -- .375 9.53 .313 7.95 .093 2.36 .093 2.36 .108 2.24 -- SOS-70 Series (70 Ohm) 032-0042-0001 2 032-0060-0001 1 032-0061-0001 3 032-0087-0001 1 052-0061-0001 2 052-0471-0001 2 -- -- -- .160 4.06 .095 2.41 .281 7.14 .281 7.14 .217 5.51 .217 5.51 .160 4.06 .145 3.68 .281 7.14 .375 9.53 .217 5.51 .313 7.95 -- -- -- -- -- Solder Pot Contact Tail Straight Pin Contact Tail1 SOS-93 Series (93 Ohm) 032-0042-0001 2 032-0058-0001 3 032-0077-0001 1 032-0084-0001 1 052-0061-0001 2 052-0471-0001 2 -- -- -- .160 4.06 .095 2.41 .281 7.14 .281 7.14 .217 5.51 .217 5.51 -- Turret Pin Contact Tail .134 3.40 .134 3.40 .154 3.91 -- -- Solder Pot Contact Tail Straight Pin Contact Tail1 Lockwasher supplied in place of solder lug. 1 100 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors Standard Connectors -- Slide-On Series (Continued) Jacks A .520 [13.21] A .375 Hex. [9.53] O .250 [6.35] Lock Washer Mounting Nut Fig. 1 Fig. 2 Mounting Hole Instruction Sheet No. Former MICRODOT I.S. No. Assembly Tool .088 2.24 .088 2.24 408-08531 RF-ASMB-104 010-0007-0000 408-08531 RF-ASMB-104 010-0007-0000 .810 20.57 .108 2.74 408-08531 RF-ASMB-104 010-0036-0000 .810 20.57 .980 24.89 1.100 27.94 .750 19.05 .134 3.40 .134 3.40 .154 3.91 .154 3.91 408-08530 RF-ASMB-103 010-1008-0000 408-08530 RF-ASMB-103 010-1008-0000 .305 [7.75] Dia. Over B.R. Cap 408-08532 RF-ASMB-105 -- Hex Nut Cable Clamp 408-08524 RF-ASMB-92 -- Instruction Sheet No. Former MICRODOT I.S. No. Assembly Tool Fig. Dim. A Cable Jacket Max. 031-0053-0001 1 031-0054-0001 2 .800 20.32 .970 24.64 1 031-0063-0001 1 031-0064-0001 2 031-0093-0001 1 031-0094-0001 2 Part No. O .313 [7.95] Min. .375 Hex. [9.53] Special Features SOS-50 Series (50 Ohm) SOS-70 Series (70 Ohm) 031-0095-0001 SOS-93 Series (93 Ohm) Right-Angle Plugs A B Coaxial Connectors O .250 [6.35] Part No. Dim. A Dim. B Cable Max. O.D. .735 18.67 .545 13.84 .092 2.34 408-08520 RF-ASMB-87 010-0016-0000 .745 18.92 .545 13.84 .111 2.82 408-08520 RF-ASMB-87 010-0016-0000 .745 18.92 .745 18.92 .605 15.37 .605 15.37 .134 3.40 .155 3.94 408-08520 RF-ASMB-87 010-0017-0000 408-08520 RF-ASMB-87 010-0017-0000 Special Features SOS-50 Series (50 Ohm) 032-0063-0001 SOS-70 Series (70 Ohm) 032-0062-0001 4 SOS-93 Series (93 Ohm) 032-0059-0001 032-0083-0001 101 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors Standard Connectors -- Slide-On Series (Continued) Receptacles A A B Max. Panel B Max. Panel OE Min. D Hex. D Hex. Solder Pot Turret Mounting Nut Solder Lug Mounting Nut Solder Lug Fig. 1 Fig. 2 A A Mounting Hole for Fig. 1 & 2 .245 [6.22] .100 .005 [2.54 0.13] Typ. B D O .037 Typ. [.940] O .037 Typ. [.940] Fig. 3 Dim. Dim. A B SOS-50 (50 Ohm), SOS-70 (70 Ohm), & SOS-93 (93 Ohm) Series .715 .160 031-0049-0001 1 18.16 4.06 .340 .155 031-0060-0001 3 8.64 3.94 .340 .250 031-0065-0001 3 8.64 6.35 .425 .155 031-0070-0001 4 10.79 3.94 .715 .160 051-0258-0001 2 18.16 4.06 .570 .140 051-0325-0001 1 14.48 3.56 Part No. Fig. O .055 Min. [1.40] Typ. C C .200 .005 [5.08 0.13] Typ. Fig. 4 Dim. C .250 6.35 .330 8.38 .330 8.38 .330 8.38 .250 6.35 .250 6.35 Dim. D Dim. E Hex. .281 7.14 .217 5.51 Dia. -- -- Dia. -- -- Dia. Hex. .540 13.72 .281 7.14 Hex. -- Mounting Pattern for Fig. 3 & 4 Special Features -- .217 5.51 .216-32 5.49 Thd. No Nut or Lockwasher, Threads into Panel 102 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors Standard Connectors -- Quick-Connect Series Jack Plug QC-50 Ohm Series 032-0002-0001 032-0030-0001 QC-70 Ohm Series 032-0016-0001 032-0031-0001 032-0079-0001 QC-93 Ohm Series 032-0012-0001 032-0032-0001 032-0072-0001 QC-50 Ohm Series 031-0038-0001 QC-70 Ohm Series QC-93 Ohm Series 031-0040-0001 QC-70 Ohm Series 031-0057-0001 QC-93 Ohm Series 031-0058-0001 031-0085-0001 QC-70 Ohm Series 031-0004-0001 031-0005-0001 031-0006-0001 051-0586-0001 QC-93 Ohm Series 031-0020-0001 031-0021-0001 Receptacle QC-50 Ohm Series 031-0057-0001 Right-Angle Plug QC-50 Ohm Series 032-0026-0001 QC-70 Ohm Series 032-0027-0001 QC-93 Ohm Series 032-0020-0001 052-0228-0001 Coaxial Connectors Receptacle QC-50 Ohm Series 031-0004-0001 031-0005-0001 031-0006-0001 051-0586-0001 4 103 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors Standard Connectors -- Quick-Connect Series (Continued) Straight Plugs A B Part No. Dim. A Dim. B Cable Jacket Max. .820 20.83 .820 20.83 .250 6.35 .250 6.35 .093 2.36 .093 2.36 .830 21.08 .830 21.08 .840 21.34 .250 6.35 .250 6.35 .250 6.35 .093 2.36 .093 2.36 .108 2.74 .845 21.46 .845 21.46 1.050 26.67 .312 7.92 .312 7.92 .312 7.92 .134 3.40 .134 3.40 .154 3.91 Special Features Instruction Sheet No. Former MICRODOT I.S. No. Assembly Tool 408-08527 RF-ASMB-100 010-0007-0000 408-08526 RF-ASMB-97 010-0007-0000 408-08527 RF-ASMB-100 010-0007-0000 408-08529 RF-ASMB-102 010-0007-0000 408-08526 RF-ASMB-97 010-0036-0000 408-08527 RF-ASMB-100 010-0008-0000 408-08529 RF-ASMB-102 010-0008-0000 408-08523 RF-ASMB-90 -- QC-50 Series (50 Ohm) 032-0002-0001 032-0030-0001 Solderless Assembly QC-70 Series (70 Ohm) 032-0016-0001 032-0031-0001 032-0079-0001 Solderless Assembly QC-93 Series (93 Ohm) 032-0012-0001 032-0032-0001 032-0072-0001 Solderless Assembly Mates with 031-0085-0001 Only Right-Angle Plugs A C OB Part No. Dim. A Dim. B Dim. C Cable Jacket Max. Instruction Sheet No. Former MICRODOT I.S. No. Assembly Tool .735 18.67 .250 6.35 .605 15.37 .092 2.34 408-08520 RF-ASMB-87 010-0016-0000 .745 18.92 .250 6.35 .605 15.37 .111 2.82 408-08520 RF-ASMB-87 010-0016-0000 .745 18.92 .745 18.92 .312 7.92 .312 7.92 .635 16.13 .720 18.29 .134 3.40 .155 3.94 408-08520 RF-ASMB-87 010-0017-0000 408-08520 RF-ASMB-87 010-0017-0000 Special Features QC-50 Series (50 Ohm) 032-0026-0001 QC-70 Series (70 Ohm) 032-0027-0001 QC-93 Series (93 Ohm) 032-0020-0001 052-0228-0001 Mates with 031-0085-0001 Only 104 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors Standard Connectors -- Quick-Connect Series (Continued) Jacks A B Part No. Dim. A Dim. B Cable Jacket Max. Instruction Sheet No. Former MICRODOT I.S. No. Assembly Tool .750 19.05 .250 6.35 .093 2.36 408-08531 RF-ASMB-104 010-0007-0000 .760 19.30 .320 8.13 .134 3.40 408-08530 RF-ASMB-103 010-1009-0000 Special Features QC-50 Series (50 Ohm) 031-0038-0001 QC-93 Series (93 Ohm) 031-0040-0001 Receptacles A A B Max. Panel B Max. Panel F Min. C Hex. D Hex. C Hex. D Hex. Mounting Nut Solder Lug Solder Lug Fig. 1 Fig. Fig. 2 Dim. B Dim. C Dim. D Dim. E .095 2.41 .165 4.19 .250 6.35 .250 6.35 .165 4.19 .165 4.19 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .191 4.85 .191 4.85 .190-32 Thd 4.83 .191 4.85 .191 4.85 .095 2.41 .165 4.19 .160 4.06 .165 4.19 .312 7.92 .312 7.92 .312 7.92 .312 7.92 .312 7.92 .312 7.92 .312 7.92 .312 7.92 .251 6.38 .251 6.38 .251 6.38 .251 6.38 -- -- Mounting Hole Dim. F Special Features -- No Mounting Flat -- No Mounting Flat -- No Nut or Solder Lug, Threads into Panel Coaxial Connectors Dim. A QC-50 Series (50 Ohm) & QC-70 Series (70 Ohm) .555 031-0004-0001 2 14.10 .555 031-0005-0001 2 14.10 .250 2 031-0006-0001 6.35 .605 031-0057-0001 1 15.37 .555 051-0586-0001 2 14.10 QC-93 Series (93 Ohm) .555 031-0020-0001 2 14.10 .555 031-0021-0001 2 14.10 .605 031-0058-0001 1 15.37 .715 1 031-0085-0001 18.16 Part No. EO Min. Solder Pot Mounting Nut Turret .173 4.39 -- No Mounting Flat, Split Solder Lug -- No Mounting Flat -- No Mounting Flat 4 .232 5.89 -- No Mounting Flat, Mates with 032-0072-0001 & 052-0228-0001 Only 105 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors Standard Connectors -- Twinax Series Twinax Plugs: For cables with two inner conductors and one shield A A B B Fig. 2 Screw-On Series Fig. 1 Slide-On Series Part No. Fig. Dim. A Dim. B 032-0088-0001 1 032-0093-0001 1 052-0229-0001 2 052-0324-0001 2 1.085 27.56 1.085 27.56 1.085 27.56 1.095 27.81 .312 7.92 .312 7.92 .440 11.18 .440 11.18 Twinax Receptacles and Jacks: Cable Jacket Max. .167 4.24 .123 3.12 .123 3.12 .167 4.24 Instruction Sheet No. Former MICRODOT I.S. No. Assembly Tool 408-08528 RF-ASMB-101 010-0031-0000 408-08528 RF-ASMB-101 010-0031-0000 408-08517 RF-ASMB-61 010-0172-0000 408-08517 RF-ASMB-61 010-0172-0000 Special Features A A B Max. Panel B Max. Panel C Hex. D Hex. C Hex. Solder Pot Mounting Nut Lockwasher Washer D Hex. Solder Pot Lockwasher Mounting Nut Fig. 1 Slide-On Series Fig. 2 Slide-On Series or Screw-On Series A B Max. Panel F Min. D Hex. C Hex. E O Min. Mounting Nut Lockwasher Fig. 3 Slide-On Series or Screw-On Series Part No. Fig. Dim. A Dim. B Dim. C Dim. D Dim. E Dim. F Cable Max. Jacket 031-0098-0001 1 2 .155 3.94 .155 3.94 .0751 1.91 .2552 6.48 .375 9.53 .437 11.10 .437 11.10 .437 11.10 .375 9.53 .375 9.53 .500 12.7 .500 12.7 .313 7.95 .313 7.95 .376 9.55 .376 9.55 .292 7.42 .292 7.42 .351 8.92 .351 8.92 -- 051-0248-0001 .812 20.62 .960 24.38 1.060 26.92 1.255 31.88 051-0358-0001 3 051-0389-0001 3 Mounting Hole Special Features -- .167 4.24 .167 4.24 Lockwasher not included Instruction Sheet No. Former MICRODOT I.S. No. Assembly Tool -- -- -- -- -- -- 408-08516 RF-ASMB-44 010-0186-0000 408-08516 RF-ASMB-44 010-0186-0000 .075 [1.91] Max. Panel when mated with a Screw-On plug, .180 [4.57] Max. Panel when mated with a Slide-On plug. .255 [6.48] Max. Panel when mated with a Screw-On plug, .360 [9.14] Max. Panel when mated with a Slide-On plug. 1 2 106 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors Standard Connectors -- Triax Series and Terminals Triax Plugs: A For cables with one inner conductor and two isolated shields B Part No. Dim. A Dim. B 052-0130-0001 1.37 34.80 1.37 34.80 1.37 34.80 .440 11.18 Dia. .440 Dia. 11.18 .438 11.13 Hex. 052-0138-0001 052-0593-0001 Cable Jacket Max. .124 3.15 .183 4.65 .214 5.44 Special Features Hex Nut w/ Safety Wire Holes, .027 [.686] Wire Max. Triax Receptacle: Former MICRODOT I.S. No. Assembly Tool 408-08514 RF-ASMB-20 -- 408-08515 RF-ASMB-21 -- 408-08518 RF-ASMB-73 -- Triax Adapter: 1.11 [28.19] .160 Max. [4.06] Panel .160 Max. [4.06] Panel O .438 Min. [11.13] 1.09 [27.69] O .501 Min. [12.73] 0.56 Hex. [14.22] 0.56 Hex. [14.22] Nut 0.50 Hex. [12.70] Lockwasher Instruction Sheet No. Mounting Nut 0.62 Hex. [15.75] Lockwasher Part Number 051-0618-0001 Mounting Hole Fig. 053-0354-0003 1 053-0249-0001 1 D 053-0495-0001 1 053-0656-0001 1 Fig. 1 053-0294-0002 1 033-0115-0002 2 033-0116-0001 2 033-0117-0001 2 053-0154-0001 1 Fig. 2 053-0250-0001 1 053-0020-0003 1 053-0021-0003 1 053-0267-0003 1 053-0265-0001 2 053-0230-0001 2 053-0155-0001 1 Terminals are gold plated. See applicable MICRODOT drawing for solder and crimp instructions. 053-0022-0003 1 053-0388-0001 2 053-0251-0001 2 Mounting Hole Dim. A Dim. B Dim. C Dim. D .030 .762 .030 .762 .030 .762 .030 .762 .030 .762 .040 1.02 .040 1.02 .040 1.02 .041 1.04 .041 1.04 .041 1.04 .041 1.04 .041 1.04 .041 1.04 .041 1.04 .041 1.04 .041 1.04 .042 1.07 .042 1.07 .080 2.03 .105 2.67 .125 3.18 .145 3.68 .145 3.68 .063 1.60 .094 2.39 .140 3.56 .080 2.03 .080 2.03 .080 2.03 .105 2.67 .105 2.67 .128 3.25 .128 3.25 .145 3.68 .145 3.68 .098 2.49 .098 2.49 .630 16.00 .630 16.00 .880 22.35 .880 22.35 .880 22.35 .255 6.48 .300 7.62 .350 8.89 .430 10.92 .505 12.83 .630 16.00 .630 16.00 .875 22.23 .505 12.83 .630 16.00 .430 10.82 .630 16.00 .500 12.70 .630 16.00 .375 9.53 .375 9.53 .610 15.49 .375 9.53 .625 15.88 .100 2.54 .100 2.54 .200 5.08 .175 4.45 .250 6.35 .375 9.53 .375 9.53 .625 15.88 .250 6.35 .375 9.53 .175 4.45 .375 9.53 .250 6.35 .375 9.53 Cable Max. Dielectric .050 1.27 .071 1.80 .083 2.11 .108 2.74 .108 2.74 .042 1.07 .068 1.73 .108 2.74 .050 1.27 .050 1.27 .050 1.27 .071 1.80 .071 1.80 .102 2.59 .102 2.59 .108 2.74 .108 2.74 .065 1.65 .065 1.65 Cable Max. Inner Conductor .015 .381 .021 .533 .022 .559 .023 .584 .023 .584 .023 .584 .023 .584 .023 .584 .019 .483 .019 .483 .015 .381 .023 .584 .023 .584 .021 .533 .018 .457 .023 .584 .023 .584 .021 .533 .021 .533 Coaxial Connectors Part No. OA C Mounting Nut Part Number 053-0161-0001 Mates with Triax Plug, Both Ends Terminals OB .468 Min. [11.89] 4 107 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors Standard Connectors -- Module Blocks D E The five faces of basic block can be used to mount any one of 10 different terminations. The 5 faces are coded with letters as shown above. The 10 terminations are coded with Nos. 1-10. Part number, to be complete, must show face location and termination Nos. .375 [9.53] C .242 [6.15] A B desired. (Ex: illustration shows 033-0042--A2-- B7--C6--D5--E1) Ordering part number will be converted to a MICRODOT assigned number at time of ordering. Size Part No. 50 Ohm 033-0042* 70 Ohm 033-0043* 93 Ohm 033-0044* Dim. H .250 6.35 .250 6.35 .300 7.62 *Part number to be completed by customer. A Computer Part Number will be assigned by Tyco Electronics. We do not stock complete assemblies. Interfaces/Terminations Termination Number Mating Type 1 2 3 4 5 6 S S QC QC SOS SOS Description Receptacle Plug with Knurl Nut Receptacle Plug Receptacle Plug .320 [8.13] .125 [3.18] .345 [8.76] .125 [3.18] O 50 Series 70 Series 93 Series Thread .190-32 UNF 4.83 .216-32 UNEF 5.49 .250-32 UNEF 6.35 Thread .190-32 UNF 4.83 .216-32 UNEF 5.49 .250-32 UNEF 6.35 .290 [7.37] .255 [6.48] O Dia. .230 5.84 .255 6.48 .320 8.13 O Dia. .250 6.35 .250 6.35 .312 7.92 Dia. .250 6.35 .250 6.35 .250 6.35 Interfaces/Terminations (Continued) Termination Number Mating Type 7 8 9 10 -- -- S S Description Bulkhead Stud Bulkhead Receptacle Plug with Hex. Nut Plug, Hex. Nut With Wire Holes .350 [8.89] .160 Max. [4.06] Panel .420 [10.67] O .191 Min. [4.85] .250 Hex. [6.35] .160 Max. [4.06] Panel Height Min. Turret O .030 [.762] 3 Plcs. Mounting Nut Solder Lug Solder Lug 93 Series Hex. Hex. Mounting Nut 70 Series O Min. Hex. .173 Min. [4.39] 50 Series .320 [8.13] .320 [8.13] Thread Thread Hex. .190-32 UNF 4.83 .190-32 UNF 4.83 .190-32 UNF 4.83 .190-32 UNF 4.83 .216-32 UNEF 5.49 .250-32 UNEF 6.35 .250 6.35 .281 7.14 .312 7.92 Min. Hole Dia. .191 4.85 .217 5.51 .251 6.38 Min. Hole Height .173 4.39 .197 5.00 .232 5.89 Thread Hex. Thread Hex. .190-32 UNF 4.83 .216-32 UNEF 5.49 .250-32 UNEF 6.35 .250 6.35 .281 7.14 .312 7.92 .190-32 UNF 4.83 .216-32 UNEF 5.49 .250-32 UNEF 6.35 .250 6.35 .281 7.14 .312 7.92 108 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors Standard Connectors -- Caps, Hoods Caps, Screw-On Series 0.20 [5.08] For Receptacles and Jacks Part No. S-50 Series 0.13 [3.30] OA Fig. Dim. A 033-0046-0001 1 033-0056-0001 2 .235 5.97 .235 5.97 S-70 Series O .094 [2.39] 033-0047-0001 1 033-0057-0001 2 Diamond Knurl Fig. 1 With Grounding Pin 0.20 [5.08] .255 6.48 .255 6.48 S-93 Series 0.12 [3.05] 033-0048-0001 1 033-0058-0001 2 .315 8.00 .315 8.00 Material -- Brass per QQ-B-626 Finish -- Silver plate per QQ-S-365, .0002 [.005] min. Note: All caps can be supplied with .094 [2.39] Dia. bead chain and end ring. When ordering, specify chain length and end ring hole size (.130 [3.30], .140 [3.56], .167 [4.24], or .193 [4.90] Dia.) OA O .094 [2.39] Diamond Knurl Fig. 2 Without Grounding Pin Receptacle Hoods A B Hex. 033-0067-0001 033-0068-0001 033-0069-0001 033-0084-0001 053-0147-0001 Dim. A .490 12.45 .490 12.45 .490 12.45 .490 12.45 .840 21.34 Dim. B .250 6.35 .250 6.35 .312 7.92 .250 6.35 .437 11.10 Dim. C .098 2.49 .114 2.90 .156 3.96 .156 3.96 .156 3.96 Thread For Receptacle Series .190-32 UNF 4.83 .216-32 UNEF 5.49 .250-32 UNEF 6.35 .216-32 UNEF 5.49 .375-32 UNEF 9.53 S-50, QC-50, QC-70 Coaxial Connectors Part No. OC S-70, SOS-50, SOS-70, SOS-93 S-93, QC-93 S-70, SOS-50, SOS-70, SOS-93 Twinax/Triax Receptacle 4 Material -- Brass per QQ-B-626 Finish -- Silver plate per QQ-S-365, .0002 [.005] min. 109 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors Standard Connectors -- Adapters Feed-Thru Adapters for Screw-On Series A .160 Max. [4.06] Panel A B "X" Hex. "Y" O .313 Min. [7.95] B "Y" Hex. Nut B "X" Hex. Mounting Nut Lockwasher Fig. 1 Fig. 2 Part No. Fig. 033-0001-0001 1 033-0053-0001 2 033-0023-0001 1 033-0054-0001 2 033-0036-0001 1 033-0055-0001 2 Dim. A .300 7.62 .600 15.24 .400 10.16 .600 15.24 .410 10.41 .600 15.24 End "Y" Is S-50 Receptacle S-50 Receptacle S-50 Receptacle S-50 Receptacle S-70 Receptacle S-70 Receptacle S-70 Receptacle S-70 Receptacle S-93 Receptacle S-93 Receptacle S-93 Receptacle S-93 Receptacle .469 Min. [11.91] Mounting Hole End "A" Is: Configuration A BNC Plug A A BNC Receptacle BNC Bulkhead Receptacle End "X" Is .501 [12.73] Min. For mating BNC/TNC connectors to MICRODOT standard connectors. BNC Receptacle Mounting Hole Dim. B .250 6.35 .375 9.53 .250 6.35 .375 9.53 .312 7.92 .375 9.53 BNC and TNC/MICRODOT Adapters for Screw-On, Slide-On, and QuickConnect Series BNC Plug .294 [7.47] Min. A A B B B B B End "B" Is: 50 Series Part No. 70 Series Part No. 93 Series Part No. Screw-On (S) Type Plug 033-0103-0001 033-0107-0001 033-0111-0001 Screw-On Type Receptacle 033-0101-0001 033-0105-0001 033-0109-0001 Screw-On (S) Type Plug 033-0104-0001 053-0108-0001 033-0112-0001 Screw-On (S) Type Receptacle 033-0102-0001 033-0106-0001 033-0110-0001 Screw-On (S) Type Plug 033-0127-00011 -- 033-0129-00011 Mounting information: Housing Hex. .688 [17.48], Mtg. Nut Hex. .625 [15.88], Max. Panel .090 [2.29]. 1 110 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors Standard Connectors -- Adapters (Continued) BNC and TNC/MICRODOT Adapters for Screw-On, Slide-On, and QuickConnect Series (Continued) .501 [12.73] Min. .469 Min. [11.91] Mounting Hole End "A" Is: BNC Bulkhead Receptacle Configuration A B End "B" Is: 50 Series Part No. 70 Series Part No. 93 Series Part No. Screw-On (S) Type Receptacle 033-0090-00011 033-0125-00011 033-0126-00011 TNC Plug A B Screw-On (S) Type Receptacle 033-0141-0001 033-0143-0001 033-0145-0001 TNC Receptacle A B Screw-On (S) Type Receptacle 033-0153-0001 -- -- BNC Plug A B Slide-On (SOS) Type Plug 053-0339-0001 053-0339-0001 053-0339-0001 A B Slide-On (SOS) Type Receptacle 033-0081-0001 033-0081-0001 033-0081-0001 BNC Receptacle A B Slide-On (SOS) Type Plug 033-0092-0001 033-0092-0001 033-0092-0001 BNC Receptacle A B Slide-On (SOS) Type Receptacle 033-0082-0001 033-0082-0001 033-0082-0001 BNC Bulkhead Receptacle A B Slide-On (SOS) Type Receptacle 033-0124-00011 033-0124-00011 033-0124-00011 BNC Plug A B Quick-Connect (QC) Type Receptacle 033-0093-0001 033-0093-0001 033-0097-0001 BNC Receptacle A B Quick-Connect (QC) Type Receptacle 033-0094-0001 033-0094-0001 -- Coaxial Connectors BNC Plug 4 Mounting information: Housing Hex. .688 [17.48], Mtg. Nut Hex. .625 [15.88], Max. Panel .090 [2.29]. 1 111 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors Gold Plated Crimp Style Coaxial Connectors Performance Data Summary For Gold Plated Crimp Style Coaxial Connectors Mechanical Captive Contacts -- Terminated connector contacts captivated from movement in both directions. Cable Retention -- 50 Ohm connectors, 15 lb. min. 70 Ohm connectors, 25 lb. min. 93 Ohm connectors, 25 lb. min. Recommended Coupling Torque (Threaded Interface) -- 8 inch/pounds max. [.904 Nm] Recommended Receptacle Mounting Torque (Threaded Interface) -- 8 inch/pounds max. [.904 Nm] Contact Protection (Unmated) -- Pin contact protected by coupling nut. Socket protected by insulator and housing. Assembly Methods Straight Plugs & Jacks -- Cable Inner Conductor: Crimped to contact. Cable Shield: Crimped under housing. Right-Angle Plugs -- Cable Inner Conductor: Crimped to contact. Cable Shield: Crimped under housing. Environmental Temperature Range (Continuous Service) -- -80F to +392F. [-62C to +200C]. Vibration1,2 -- MIL-STD-202, Method 204, Test condition B (15 G peak). No physical damage or electrical discontinuities in excess of 1 microsecond. Shock1,2 -- MIL-STD-202, Method 213, Test Condition H. No physical damage or electrical discontinuity after shock. Thermal Shock -- MIL-STD-202, Method 107, Test Condition C. Moisture Resistance1 -- MIL-STD202, Method 106. Salt Spray1 -- MIL-STD-202, Method 101, Test Condition B (48 hours). Electrical Impedance -- Designed to be compatible with 50, 70, or 93 Ohm miniature coaxial cable. Dielectric Withstanding Voltage -- 1000 volts RMS at sea level. Contact Resistance -- 4 milliohms max., D.C. Contact Capacity -- 3 amps, D.C. Insulation Resistance -- 5 x 103 Megohms min. @ 500 volts D.C. Voltage Standing Wave Ratio3 (VSWR) -- Typical 50 Ohm series, 1.2 max. to 2 GHz. Materials Housing, Nut, Inner Sleeve -- Brass per ASTM-B-16, 35% Zinc. Insulator -- TEFLON per ASTM-D-1710. Pin & Socket Contacts -- Beryllium Copper per ASTM-B-196. Middle Sleeve -- Copper Alloy. Facial Seal4, Sealing Sleeve & Gasket -- Silicone Rubber per ZZ-R-765. Lockwasher -- #425 Bronze Alloy. Plating Contacts, Housing, Nut, Inner Sleeve, Middle Sleeve, Lockwasher -- Gold per MIL-G-45204, Type II, Grade C, Class 1. NOTES: 1 Screw-On Series threaded interface. 2 Tyco Electronics recommends the use of wired connectors in vibration and shock environments. See individual specifications for connectors with wire holes. 3 VSWR is a system specification. Where performance is critical, purchase Tyco Electronics cable assemblies (See page 127) and specify VSWR testing and mating connector part numbers. 112 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors Gold Plated Crimp Style Coaxial Connectors -- Screw-On Series Straight Plugs A A B Hex. OB Fig. 1 Partial Hex. Nut Fig. 2 Knurl Nut A A B Hex. B Hex. Fig. 3 Full Hex. Nut Dim. A Dim. B Cable Max. .800 20.32 .800 132-0112-0002 2 20.32 .800 132-0112-0003 3 20.32 .800 132-0112-0004 4 20.32 .800 132-0113-0001 1 20.32 .800 132-0113-0002 2 20.32 .800 132-0113-0003 3 20.32 .800 132-0113-0004 4 20.32 .800 132-0114-0001 1 20.32 .800 132-0114-0002 2 20.32 .800 132-0114-0003 3 20.32 .800 132-0114-0004 4 20.32 .800 1 132-0115-0001 20.32 .800 132-0115-0002 2 20.32 .800 132-0115-0003 3 20.32 .800 4 132-0115-0004 20.32 .800 132-0509-0002 2 20.32 70 Ohm Series .216 [5.49] -32 UNEF-2B Thread .800 132-0200-0001 1 20.32 .800 132-0200-0002 2 20.32 .800 132-0200-0003 3 20.32 .800 132-0200-0004 4 20.32 .800 1 132-0201-0001 20.32 .800 2 132-0201-0002 20.32 .800 132-0201-0003 3 20.32 .800 132-0201-0004 4 20.32 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .250 6.35 .088 2.24 .088 2.24 .088 2.24 .088 2.24 .088 2.24 .088 2.24 .088 2.24 .088 2.24 .110 2.79 .110 2.79 .110 2.79 .110 2.79 .110 2.79 .110 2.79 .110 2.79 .110 2.79 .116 2.95 .281 7.14 .290 7.37 .281 7.14 .281 7.14 .281 7.14 .290 7.37 .281 7.14 .281 7.14 .110 2.79 .110 2.79 .110 2.79 .110 2.79 .110 2.79 .110 2.79 .110 2.79 .110 2.79 Part No. Fig. Fig. 4 Hex. Nut w/ 3 Safety Wire Holes Instruction Sheet No. Former MICRODOT I.S. No. 408-08508 RF-ASMB-8 408-08508 RF-ASMB-8 408-08508 RF-ASMB-8 408-08508 RF-ASMB-8 With environmental seal 408-08508 RF-ASMB-8 With environmental seal 408-08508 RF-ASMB-8 With environmental seal 408-08508 RF-ASMB-8 With environmental seal 408-08508 RF-ASMB-8 408-08508 RF-ASMB-8 408-08508 RF-ASMB-8 408-08508 RF-ASMB-8 408-08508 RF-ASMB-8 With environmental seal 408-08508 RF-ASMB-8 With environmental seal 408-08508 RF-ASMB-8 With environmental seal 408-08508 RF-ASMB-8 With environmental seal 408-08508 RF-ASMB-8 Dual shield cable version of RG 188 & 316 408-08508 RF-ASMB-8 408-08508 RF-ASMB-8 408-08508 RF-ASMB-8 408-08508 RF-ASMB-8 408-08508 RF-ASMB-8 With environmental seal 408-08508 RF-ASMB-8 With environmental seal 408-08508 RF-ASMB-8 With environmental seal 408-08508 RF-ASMB-8 With environmental seal 408-08508 RF-ASMB-8 Special Features 50 Ohm Series .190 [4.83] -32 UNF-2B Thread 132-0112-0001 1 Coaxial Connectors 4 113 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors Gold Plated Crimp Style Coaxial Connectors -- Screw-On Series (Continued) Straight Plugs (Continued) Part No. Dim. A Dim. B Cable Max. .795 20.19 .795 20.19 .795 20.19 .795 20.19 .795 20.19 .795 20.19 .795 20.19 .795 20.19 .312 7.92 .320 8.13 .312 7.92 .312 7.92 .312 7.92 .320 8.13 .312 7.92 .312 7.92 .155 3.94 .155 3.94 .155 3.94 .155 3.94 .155 3.94 .155 3.94 .155 3.94 .155 3.94 Fig. Instruction Sheet No. Former MICRODOT I.S. No. 408-08508 RF-ASMB-8 408-08508 RF-ASMB-8 408-08508 RF-ASMB-8 408-08508 RF-ASMB-8 With environmental seal 408-08508 RF-ASMB-8 With environmental seal 408-08508 RF-ASMB-8 With environmental seal 408-08508 RF-ASMB-8 With environmental seal 408-08508 RF-ASMB-8 Instruction Sheet No. Former MICRODOT I.S. No. 408-08509 RF-ASMB-11 408-08509 RF-ASMB-11 408-08509 RF-ASMB-11 408-08509 RF-ASMB-11 408-08509 RF-ASMB-11 408-08509 RF-ASMB-11 408-08509 RF-ASMB-11 408-08509 RF-ASMB-11 Special Features 93 Ohm Series .250 [6.35] -32 UNEF-2B Thread 132-0300-0001 1 132-0300-0002 2 132-0300-0003 3 132-0300-0004 4 132-0301-0001 1 132-0301-0002 2 132-0301-0003 3 132-0301-0004 4 OB Right-Angle Plugs C A Knurl Nut Part No. Dim. A Dim. B 50 Ohm Series .190 [4.83] -32 UNF-2B Thread .660 .250 132-0116-0002 16.76 6.35 .660 .250 132-0117-0002 16.76 6.35 .695 .250 132-0118-0002 17.65 6.35 .695 .250 132-0119-0002 17.65 6.35 70 Ohm Series .216 [5.49] -32 UNEF-2B Thread .695 .290 132-0202-0002 17.65 7.37 .695 .290 132-0203-0002 7.37 17.65 93 Ohm Series .250 [6.35] -32 UNEF-2B Thread .710 .320 132-0302-0002 8.13 18.03 .710 .320 132-0303-0002 8.13 18.03 Dim. C Cable Jacket Max. .620 15.75 .620 15.75 .650 16.51 .650 16.51 .088 2.24 .088 2.24 .110 2.79 .110 2.79 .650 16.51 .650 16.51 .110 2.79 .110 2.79 .680 17.27 .680 17.27 .155 3.94 .155 3.94 Special Features With environmental seal With environmental seal With environmental seal With environmental seal 114 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors Gold Plated Crimp Style Coaxial Connectors -- Screw-On Series (Continued) Jacks B B Hex. C Max. Panel .375 Hex. [9.53] Nut Mounting Nut Fig. 1 Part No. Fig. Dim. A 50 Ohm Series .190 [4.83] -32 UNF-2B Thread .770 131-0134-0001 1 19.56 .770 2 131-0135-0001 19.56 .770 131-0136-0001 1 19.56 .770 131-0137-0001 2 19.56 .770 131-0150-0001 1 19.56 .770 131-0151-0001 2 19.56 70 Ohm Series .216 [5.49] -32 UNEF-2B Thread .770 131-0200-0001 1 19.56 .770 131-0201-0001 2 19.56 93 Ohm Series .250 [6.35] -32 UNEF-2B Thread .760 131-0300-0001 1 19.30 .760 131-0301-0001 2 19.30 O .313 Min. [7.95] A Dim. B .250 6.35 .360 9.14 .250 6.35 .360 9.14 .250 6.35 .360 9.14 .281 7.14 .360 9.14 .312 7.92 .350 8.89 .375 Hex. [9.53] Lockwasher Fig. 2 Dim. C Cable Jacket Max. -- .088 2.24 .088 2.24 .110 2.79 .110 2.79 .116 2.95 .116 2.95 .105 2.67 -- .105 2.67 -- .105 2.67 -- .100 2.54 -- .095 2.41 .292 Min. [7.42] Mounting Hole Instruction Sheet No. Former MICRODOT I.S. No. 408-08508 RF-ASMB-8 408-08508 RF-ASMB-8 408-08508 RF-ASMB-8 408-08508 RF-ASMB-8 408-08508 RF-ASMB-8 408-08508 RF-ASMB-8 .110 2.79 .110 2.79 408-08508 RF-ASMB-8 408-08508 RF-ASMB-8 .155 3.94 .155 3.94 408-08508 RF-ASMB-8 408-08508 RF-ASMB-8 Special Features Dual Shield Cable Version of RG 188 & 316 Dual Shield Cable Version of RG 188 & 316 Coaxial Connectors 4 115 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors Gold Plated Crimp Style Coaxial Connectors -- Screw-On Series (Continued) Receptacles A B Max. Panel A B Max. Panel D Hex. C Solder Lug Mounting Nut Fig. 1 Mounting Hole for Fig. 1 & 2 Fig. 2 A B .245 [6.22] B A F Min. Solder Pot Turret Mounting Nut Solder Lug O E Min. D Hex. C .200 .005 [5.08 0.13] Typ. .100 .005 [2.54 0.13] C Typ. D C O .055 Min. [1.40] Typ. O .037 Typ. [0.94] O .037 Typ. [0.94] Fig. 3 Dim. A 50 Ohm Series .190 [4.83] -32 UNF-2A Thread .605 131-0138-0002 1 15.37 .515 131-0139-0002 2 13.08 .255 131-0140-0001 2 6.48 .340 131-0141-0002 3 8.64 .425 131-0142-0002 4 10.80 70 Ohm Series .216 [5.49] -32 UNEF-2A Thread .605 131-0202-0002 1 15.37 .340 131-0705-0001 3 8.64 93 Ohm Series .250 [6.35] -32 UNEF-2A Thread .340 131-0303-0002 3 8.64 .425 131-0304-0001 4 10.80 .605 1 131-0904-0001 15.37 Part No. Fig. Gold Plated Crimp Style Coaxial Connectors Assembly Tools Dim. B Dim. C Dim. D Dim. E Dim. F .160 4.06 .150 3.81 .250 6.35 .250 6.35 .191 4.85 .191 4.85 .173 4.39 -- No Mounting Flat -- .190 -32 Thd. 4.83 -- No Nut or Solder Lug, Threads into Panel .155 3.94 .155 3.94 .250 6.35 Hex. .187 Wrench Flats 4.75 .187 Wrench Flats 4.75 .330 Dia. 8.38 .330 8.38 Dia. .160 4.06 .155 3.94 .250 6.35 Hex. .330 8.38 Dia. .155 3.94 .155 3.94 .160 4.06 .330 Dia. 8.38 .330 8.38 Dia. .312 7.92 Hex. -- -- -- -- .480 12.19 -- -- .281 7.14 .217 5.51 .197 5.00 -- -- -- -- -- -- .480 12.19 .312 7.92 -- -- .251 6.38 .232 5.89 Table 1. Contact Crimp Tools MICRODOT Part No. 010-0065-0000 Special Features Table 2. Housing Crimp Tools Manufacturers Part No. Astro Tool A-810-3 Pin Contact Sealing Sleeve Mounting Pattern for Fig. 3 & 4 Fig. 4 Housing Insulator MICRODOT Part No. 010-0081-0000 010-0082-0000 010-0083-0000 Max. Cable Diameter .088 [2.24] .110 [2.79] .155 [3.94] Housing Sub-assembly Plug Inner Sleeve Middle Sleeve Thomas & Betts Part No. WT-400 WT-402 WT-406 Cable Insulator Jack Socket Contact Housing Insulator Housing Gasket 116 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors LEPRA/CON Ultra-Miniature Connectors Performance Data Summary For LEPRA/CON Connectors Mechanical Environmental Captive Contacts -- Terminated connector contacts captivated from movement in both directions. Cable Retention -- 10 lb. min. when properly assembled to RG196/U and RG178/U cable. Recommended Coupling Torque (Threaded Interface) -- 24 inch/ounces max. Recommended Receptacle Mounting Torque (All Series) -- 24 inch/ounces max. Typical Cable Acceptance Dimensions -- Inner conductor: .012 [0.31] nom. Dielectric: .039 [0.99] max. Shield: .059 [1.50] max. Jacket: .081 [2.06] max. Contact Protection (Unmated) -- Twist pin contact protected from damage by insulator. Tube socket protected by connector housing. Temperature Range (Continuous Service) -- -85F to +392F [-65C to +200C]. Vibration1,2 -- MIL-STD-202, Method 204, Test Condition B (15 G peaks). No physical damage or electrical discontinuities in excess of 1 microsecond. Shock1,2 -- MIL-STD-202, Method 213, Test Condition H. No physical damage or electrical discontinuity after shock. Thermal Shock -- MIL-STD-202, Method 107, Test Condition C. Moisture Resistance1 -- MIL-STD202, Method 106. Salt Spray1 -- MIL-STD-202, Method 101, Test Condition B (48 hours). Assembly Methods Straight Plugs & Jacks -- Cable Inner Conductor: Crimped to contact. Cable Shield: Crimped under housing. Right-Angle Plugs -- Cable Inner Conductor: Soldered to contact. Cable Shield: Crimped under housing. Electrical Impedance -- Designed to be compatible with 50 Ohm coaxial cable RG178/U. Dielectric Withstanding Voltage -- 450 volts RMS at sea level, 250 volts RMS at 50,000 ft [15,240 m], 150 volts RMS at 70,000 ft. [21,336 m] Contact Resistance -- 8 milliohms max., D.C. Contact Capacity -- 3 amps, D.C. Insulation Resistance -- 104 Megohms min. @ 500 volts D.C. Voltage Standing Wave Ratio3 (VSWR) -- Typical 50 Ohm Series, 1.2 Maximum to 2 GHz. Materials Housing, Nut, Ferrule -- Brass per ASTM-B-16. Insulator -- TEFLON per ASTM-D-1710. Pin & Socket Contact -- Copper Alloy. Crimp Sleeve -- Copper Alloy. Lockwasher -- #425 Bronze Alloy. Plating Contacts, Housing, Nut, Ferrule, Crimp Sleeve, Lockwasher -- Gold per MIL-G-45204, Type II, Grade C, Class 1. Notes: 1 Screw-On Series, threaded interface. 2 Tyco Electronics recommends the use of safety wired connectors in vibration and shock environments. See individual specifications with wire holes. 3 VSWR is a system specification. Where performance is critical, purchase Tyco Electronics cable assemblies with Screw-On connectors (See page 129) and specify VSWR testing and mating connector part numbers. Coaxial Connectors 4 117 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors LEPRA/CON Ultra-Miniature Connectors -- Screw-On Series Featuring Twist Pin, Pin and Socket Contacts, Standard Interface MICRODOT twist pin, pin and socket contacts are used in LEPRA/CON connectors. Twist pin contact pins are produced from beryllium copper material with a gold-plated finish and constructed with helicallywound stress free cable of spring copper around a highly conductive soft copper core, terminated with a hemispherical weld. Twist pin contacts contain seven selfwiping spring surfaces, designed for consistent continuity and very low noise level. Twist pin contacts are self-aligning because of the contactengaging-end configuration. The sockets are a closed entry tubular-type contact, made of gold-plated copper alloy. The connectors are designed to be used with coaxial cables RG196/U and RG178/U. The connectors are designed with the contacts completely protected for reliability. The use of twist pin contacts makes the connectors very rugged for their size. Solder Center Conductor to Contact .015 Dia. [0.38] 3 Places (142-0000-0003 Only) .395 [10.03] .015 Dia. [0.38] 3 Places (142-0002-0003 Only) .380 [9.65] .125-44UNF-2B [3.18] (Modified) .580 [14.73] .125 -44UNF-2B [3.18] (Modified) Straight Plugs1 Part No. 142-0000-0001 142-0000-0002 142-0000-0003 Right-Angle Plug1 Nut Style .156 [3.96] Hex. .160 [4.06] Dia. Knurl .156 [3.96] Hex. w/ Safety Wire Holes Part No. 142-0002-0001 142-0002-0002 142-0002-0003 Assembly instructions: RF-ASMB-12 Assembly instructions: RF-ASMB-13 .125-44UNF-2A [3.18] (Modified) .580 [14.73] .270 [6.86] .270 [6.86] .156 [3.96] Hex. Stk. Nut Style .156 [3.96] Hex. .160 [4.06] Dia. Knurl .156 [3.96] Hex. w/ Safety Wire Holes .156 [3.96] Hex. Stk. Jack1 Part Number 141-0000-0001 Instruction Sheet Number 408-08510 Former MICRODOT I.S. Number RF-ASMB-12 .580 [14.73] .093 Max. [2.36] Panel .125-44UNF-2A [3.18] (Modified) Bulkhead Jack1 Part Number 141-0001-0001 Instruction Sheet Number 408-08510 Former MICRODOT I.S. Number RF-ASMB-12 .125-44UNF-2A [3.18] (Modified) .425 [10.80] .022 Solder Pot [0.56] I.D. .156 2 Plcs. [3.96] .093 Max. [2.36] Panel .260 [6.60] .022 Turret I.D. [0.56] Turret .140 [3.56] .156 [3.96] 2 Plcs. .093 Max. [2.36] Panel .425 [10.80] .125-44UNF-2B [3.18] (Modified) Front Mount Receptacle1 Part No. 141-0002-0001 141-0002-0002 .022 Solder Pot I.D. [0.56] Rear Mount Receptacle1 Contact Tail Turret Solder Pot Part No. 141-0003-0001 141-0003-0002 Contact Tail Turret Solder Pot Mounting hole pattern and assembly tools shown on page 123. 1 118 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors LEPRA/CON Ultra-Miniature Connectors -- Screw-On Series (Continued) Featuring Twist Pin, Pin and Socket Contacts, Standard Interface (Continued) .225 [5.72] .125-44UNF-2A [3.18] (Modified) .172 [4.37] .026 Dia.-Typ. [.660] Straight Printed Circuit Receptacle1 Part No. 141-0004-0001 .370 [9.40] Cavity Potted With Epoxy Cavity Potted With Epoxy .370 [9.40] .120 [3.05] .385 [9.78] .385 [9.78] .125-44UNF-2A Thd. [3.18] (Modified) .125-44UNF-2A Thd. [3.18] (Modified) .172 [4.37] .172 [4.37] .026 Dia. [6.60] 5 Plcs. .120 [3.05] .026 Dia. [6.60] Typ. Shipping Fixture Right-Angle Printed Circuit Receptacle1 (Small Mounting Pattern) Part Number 141-0019-0001 Right-Angle Printed Circuit Receptacle1 (Standard Mounting Pattern) Part Number 141-0010-0001 .545 [13.84] .205 [5.21] .080 Max. [2.03] Panel .125 -UNF44-2A Thd. [3.18] (Modified) Both Ends .202 [5.13] Min. .217 [5.51] .216-32 UNF [5.49] Thd. .250 Hex. [6.35] 2 Plcs. .156 [3.96] Hex. Coaxial Connectors Feed-Thru Bulkhead Adapter (Both Ends are Receptacle Interface) Part Number 143-0005-0001 .125-44 UNF-2A [3.18] (Modified) .275 [6.99] .093 Max. [2.36] Panel .490 [12.45] .156 [3.96] Sq. .285 [7.24] 4 Straight Plug .115 [2.92] Cavity Filled With Epoxy Right-Angle Receptacle1 Part Number 141-0013-0001 Mounting hole pattern and assembly tools shown on page 123. 1 119 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors LEPRA/CON Ultra-Miniature Connectors -- Screw-On Series (Continued) Featuring Twist Pin, Pin and Socket Contacts with Locking Interface The MICRODOT LEPRA/CON coaxial connector series is now offered with a unique locking interface feature. This new coupling design permits the user to lock the coaxial plug, when mated to its receptacle, preventing any axial rotation. This adaptation is especially popular on connector installations requiring straight or 90 cable terminations firmly held in a fixed position. The locking interface is especially suited for telecommunications and instrumentation applications. Solder Center Conductor to Contact .395 [10.03] .015 Dia. 3 Plcs. [0.38] (142-0010-0003 Only) .125-44UNF-2B [3.18] (Modified) .380 [9.65] .125-44UNF-2B [3.18] (Modified) .580 [14.73] Straight Plug1 Part No. 142-0010-0001 142-0010-0002 142-0010-0003 .015 Dia. 3 Plcs. Ref. [0.38] (142-005-0003 Only) Right-Angle Plug1 Nut Style .156 [3.96] Hex. .160 [4.06] Dia. Knurl .156 [3.96] Hex. w/ Safety Wire Holes Assembly instructions: RF-ASMB-12, 142-0010-0001 Part No. 142-0005-0001 142-0005-0002 142-0005-0003 Nut Style .156 [3.96] Hex. .160 [4.06] Dia. Knurl .156 [3.96] Hex. w/ Safety Wire Holes Assembly instructions: RF-ASMB-13, 142-0005-0001 Assembly tools; page 123. 1 120 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors LEPRA/CON Ultra-Miniature Connectors -- Screw-On Series (Continued) Featuring Twist Pin, Pin and Socket Contacts with Locking Interface (Continued) .590 [14.99] .156 [3.96] .590 [14.99] .285 [7.24] .125-44UNF-2A [3.18] (Modified) .125-44UNF-2A [3.18] (Modified) .156 2 Plcs. [3.96] Straight Jack1 Part Number 141-0017-0001 Instruction Sheet Number 408-08510 Former MICRODOT I.S. Number RF-ASMB-12 .125-44UNF-2A [3.18] (Modified) .093 Max. [2.36] Panel Bulkhead Jack1 Part Number 141-0014-0001 Instruction Sheet Number 408-08510 Former MICRODOT I.S. Number RF-ASMB-12 .022 Solder Pot [.559] I.D. .156 Hex. [3.96] 2 Plcs. .022 Solder Pot [.559] I.D. Turret .156 2 Plcs. [3.96] Turret .155 [3.94] .275 [6.99] .093 Max. [2.36] Panel .125-44UNF-2A Thd. [3.18] (Modified) .440 [11.18] Front Mount Receptacle1 Part No. 141-0012-0001 141-0012-0002 .093 Max. [2.36] Panel .440 [11.18] Rear Mount Receptacle w/ Locking Interface1 Contact Tail Solder Pot Turret Part No. 141-0011-0001 141-0011-0002 .240 [6.10] Contact Tail Turret Solder Pot .172 [4.37] .125-44UNF-2A [3.18] (Modified) .156 [3.96] .026 Dia. [0.66] Typ. .125-44UNF-2A [3.18] (Modified) Coaxial Connectors .275 [6.99] Straight Printed Circuit Receptacle1 Part Number 141-0015-0001 .093 Max. [2.36] Panel .490 [12.45] .385 [9.78] Cavity Potted With Epoxy .120 [3.05] .115 [2.92] Cavity Filled With Epoxy .156 Sq. [3.96] .300 [7.62] 4 .385 [9.78] .125-44UNF-2A [3.18] (Modified) .172 [6.77] Right-Angle Receptacle1 Part Number 141-0020-0001 .026 Dia. [.660] 5 Plcs. Shipping Fixture Right-Angle Printed Circuit Receptacle1 Part Number 141-0023-0001 Mounting hole pattern and assembly tools shown on page 123. 1 121 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors LEPRA/CON Ultra-Miniature Connectors -- Slide-On Series LEPRA/CON Slide-On Connectors offer a convenient mating style along with Ultra-miniature size. Inner contacts are twist pin tubular sockets in plugs and twist pin contacts for jacks and receptacles. Positive housing contact is provided by a three finger contact in the plug housing. Featuring Twist Pin, Pin and Socket Contacts .125 [3.18] .610 [15.49] .125 Dia. [3.18] .440 [11.18] Straight Plug1 Part Number 142-1000-0001 Instruction Sheet Number 408-08512 Former MICRODOT I.S. Number RF-ASMB-15 .380 [9.65] Right-Angle Plug1 Part Number 142-1002-0001 Instruction Sheet Number 408-08513 Former MICRODOT I.S. Number RF-ASMB-16 .250 Hex. [6.35] 2 Plcs. .190 -32UNF-2 Thd. [4.83] .640 [16.26] .335 [8.51] .140 Max. [3.56] Panel .265 [6.73] .093 Max. [2.36] Panel O .191 Min. [4.85] .445 [11.30] Mounting Hole .490 [12.45] Right-Angle Bulkhead Mount Plug1 Part Number 142-1021-0001 Instruction Sheet Number 408-08519 Former MICRODOT I.S. Number RF-ASMB-76 .156 Hex. [3.96] 2 Plcs. .125-44UNF-2A [3.18] (Modified) Straight Bulkhead Jack1 Part Number 141-1001-0001 Instruction Sheet Number 408-08512 Former MICRODOT I.S. Number RF-ASMB-15 .570 [3.99] .220 [5.59] .495 [12.57] .022 Solder Pot [0.56] I.D. .093 Max. [2.36] Panel Turret .125 Dia. [3.18] .125-44UNF-2 [3.18] (Modified) Straight Jack1 Part Number 141-1000-0001 Instruction Sheet Number 408-08512 Former MICRODOT I.S. Number RF-ASMB-15 .156 Hex. [3.96] 2 Plcs. Front Mount Receptacle1 Part No. 141-1002-0001 141-1002-0002 Mounting hole and assembly tools shown on page 123. 1 Contact Tail Turret Solder Pot 122 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors LEPRA/CON Ultra-Miniature Connectors -- Slide-On Series (Continued) Featuring Twist Pin, Pin and Socket Contacts (Continued) .156 Hex. [3.96] .022 Solder Pot [.559] I.D. .275 .490 [6.99] [12.45] .125-44UNF-2A [3.18] (Modified) .335 [8.51] .156 [3.96] Hex. 2 Plcs. Turret .093 Max. [2.36] Panel .115 [2.92] .495 [12.57] .156 Sq. [3.96] Part No. 141-1003-0001 141-1003-0002 Cavity Filled With Epoxy .385 [9.78] Rear Mount Receptacle Right-Angle Receptacle Mounting Hole Shown Below Part Number 141-1012-0001 Contact Tail Turret Solder Pot Mounting Hole shown below. .425 [10.80] .026 Dia. Typ [0.66] .385 [9.78] .097 Dia. [2.46] .120 [3.05] .172 [4.37] .260 [6.60] .172 [4.37] .026 Dia. Typ. [0.66] Straight Printed Circuit Receptacle Mounting Hole Pattern Shown Below Part Number 141-1004-0001 .126 [3.20] Min. Right-Angle Printed Circuit Receptacle Mounting Hole Pattern Shown Below Part Number 141-1005-0001 .045-.055 Typ. [1.14-1.40] .095-.105 Typ. [2.41-2.67] .095-.105 Typ. [2.41-2.67] .114 Min. [2.90] .046 Dia. Min. [1.17] 5 Holes .195-.205 Typ. [4.95-5.21] Bulkhead Receptacle Mounting Hole Coaxial Connectors .046 Dia. Min. [1.17] 5 Holes Small Pattern Connectors 141-0019-0001 and 141-0023-0001 Only Standard Pattern Printed Circuit Receptacle Mounting Hole Pattern LEPRA/CON Connector Assembly Tools 4 Contact Crimp Tool Housing Crimp Tool MICRODOT Part No. 010-0132-0000 Thomas & Betts Part No. WT-419 Connector Straight Connector Only 141-1001-0001 Contact Crimp No. Astro Tool Part No. 010-0150-0000 A-826-1 010-0161-0000 827 123 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors LEPRA/CON Ultra-Miniature Connectors (Continued) BNC / LEPRA/CON Connector Adapters .125-44UNF-2A [3.18] (Modified) End B .125-44UNF-2A [3.18] (Modified) End A End B End A .900 [22.86] .850 [21.59] End "B" is MICRODOT End "A" is BNC Plug Screw-On Plug Part Number 143-0001-0001 .950 [24.13] End "A" is BNC Receptacle End "B" is MICRODOT Screw-On Receptacle Part Number 143-0003-0001 .125-44UNF-2B [3.18] (Modified) .125-44UNF-2A [3.18] (Modified) End B End A End A End B .865 [21.97] End "A" is BNC Plug End "B" is MICRODOT Screw-On Plug with Locking Interface Part Number 143-0029-0001 End "A" is BNC Receptacle End "B" is MICRODOT Screw-On Receptacle with Locking Interface Part Number 143-0032-0001 .835 [21.21] End B End A .125-44UNF-2A [3.18] (Modified) End A End B .785 [19.94] End "B" is Screw-On Receptacle End "A" is BNC Plug Part Number 143-0002-0001 End "A" is BNC Plug End "B" is MICRODOT Slide-On Plug Part Number 143-1000-0001 124 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors LEPRA/CON Ultra-Miniature Connectors (Continued) BNC / LEPRA/CON Connector Adapters (Continued) .800 [20.32] .900 [22.86] .125-44UNF-2A [3.18] (Modified) End B End A End B End A End "A" is BNC Plug End "B" is MICRODOT Receptacle with Locking Interface Part Number 143-0031-0001 End "A" is BNC Plug End "B" is MICRODOT Slide-On Receptacle Part Number 143-1002-0001 .125-44UNF-2B [3.18] (Modified) End B End A End A End B .965 [24.51] .900 [22.86] End "A" is BNC Receptacle End "B" is MICRODOT Screw-On Plug Part Number 143-0004-0001 End "A" is BNC Receptacle End "B" is MICRODOT Slide-On Plug Part Number 143-1001-0001 .125-44UNF-2B [3.18] (Modified) End A End A End B End B Coaxial Connectors .965 [24.51] 1.015 [25.78] End "B" is MICRODOT Screw-On Plug with Locking Interface Part Number 143-0030-0001 End "A" is BNC Receptacle End "A" is BNC Receptacle End "B" is MICRODOT Slide-On Receptacle Part Number 143-1003-0001 4 125 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors LEPRA/CON Ultra-Miniature Connectors -- Snap-Lock Series Product Facts n n n n n Simple coupling design eliminates the need for tools and saves assembly time Positive locking mechanism provides its own fail-safe features Inspection of the mated connector is fast, simple and effective Push-Pull design allows higher panel density Quick-connect and disconnect features Performance Data Summary For Snap-Lock Connectors Electrical Environmental Impedance -- Designed to be compatible with 50 Ohm coaxial cables (Dual Shield RG 196). Dielectric Withstanding Voltage -- 450 volts RMS at sea level (Operating). Contact Resistance -- 8 milliohms max. at 3 amps. Average resistance: 4 milliohms Insulation Resistance -- 104 megohms min. Voltage Standing Wave Ratio (VSWR) -- 3.4 max., 1.3 min. to 12 GHz. Temperature Range -- -85F to +257F [-65C to +125C]. Vibration -- MIL-STD-202, Method 204, Test condition D. No change in electrical discontinuity in excess of 1 microsecond. Shock -- MIL-STD-202, Method 213A, Test Condition C. No electrical discontinuity or evidence of physical damage. .093 Max. [2.36] Panel .406 [10.31] 8-32 UNC-2A (Modified) .219 [5.56] .093 Max. [2.36] Panel .406 [10.31] 8-32 UNC-2A (Modified) .312 [7.92] Bulkhead Jack, Rear Mount Part Number 145-0001-0001 .219 [5.56] .625 [15.88] Body and Body Components -- Brass per QQ-B-626 Comp 360. Contact Material -- Copper Alloy. Crimp Sleeves -- Leaded Copper. Insulators -- TEFLON per ASTM-D-1710. Lockwashers -- #425 Bronze Alloy. Plating -- Gold per MIL-G-45204, Type II, Grade C, Class 1. Cable Acceptance Dimensions -- Center conductor: .012 [0.31] nom. Dielectric: .040 [1.02] max. Shield: .080 [2.03] max. Jacket: .090 [2.29] max.. .750 [19.05] Straight Plug Part Number 144-0001-0001 Materials Mechanical .250 [6.35] .719 [18.26] All-Crimp Assembly -- Center contacts and shield are crimped individually. Durability -- 500 mating cycles. .312 [7.92] Receptacle, Rear Mount Part Number 145-0003-0001 .219 [5.56] .312 [7.92] .165-.168 [4.19-4.27] "D" Hole Dimensions For Panel Mounting .625 [15.88] .093 Max. [2.36] Panel .146-.149 [3.71-3.78] Connector/Cable Assembly Crimp Tools -- Center Contact and Shield .285 [7.24] 8-32 UNC-2A (Modified) Tool SKT & Pin Crimp Housing Crimp Part No. 010-1004-0000 010-0081-0000 Receptacle, Front Mount Part Number 145-0002-0001 126 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors Cable Assemblies no tooling charges, precision construction, thorough inspection and prompt delivery. The capability also makes it possible for the designer to specify a complete assembly or harness with the understanding that Tyco Electronics will deliver a custom fabrication equal in quality to the MICRODOT Capability The experience Tyco Electronics has gained through years of pioneering efforts in the development of MICRODOT miniaturized cable and connectors is available to customers in the assembly of complex cable/connector combinations. This experience offers the customer low cost and How To Order 1. Specify MICRODOT part numbers A. Connector, one end components it contains. These assemblies are made to the customer's specifications or are designed by the Company's experienced engineers to fit particular requirements. Special features are light weight, reduced size, high operating temperatures and comprehensive layouts. 3. Specify length tolerance A. Standard tolerance B. Connector, other end C. Cable Assembly Length 0 thru 12-1/2" Tolerance 1/8" 1% rounded to nearest 1/4" 1% rounded to nearest 1" Over 12-1/2" thru 1000" 2. Specify normal length A. Overall length Over 1000" Jacks Plugs O. A. L. Right Angles Jacks B. Special tolerance Tolerances as close as .5% are available for most cable assemblies at a premium rate. Consult Tyco Electronics for details. 4. Specify cable strip (Applies to cable assemblies with only one connector) O. A. L. Right Angles A. Not stripped Right Angles B. Standard strip 12" O. A. L. B. Or length between connectors Jacks Plugs Right Angles Jacks Coaxial Connectors 12" Cable Length Between Connectors 12" Standard Strip C. Special strip - specify style Example: Cable Length Between Connectors Right Angles Right Angles Connector: 142-1000-0001 one end 142-1002-0001 other end Length: 36" overall, standard tolerance 4 Cable Length Between Connectors 127 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors Cable Assemblies (Continued) Mating Interface Chart Series S50 50 Ohm 50 Ohm S70 70 Ohm 70 Ohm S93 93 Ohm 93 Ohm SOS 50 SOS 70 SOS 93 QC 50 QC 70 QC 93 Screw-On Slide-On Screw-On Screw-On Screw-On Slide-On Plugs Description Standard Gold Plated Crimp Style Cap Standard Gold Plated Crimp Style Cap Standard Gold Plated Crimp Style Cap Standard Standard Standard Standard Standard Standard Twinax Twinax Triax LEPRA/CON Connector LEPRA/CON Connector Interlocking Interface LEPRA/CON Connector Page 94, 95 113, 114 109 94, 95 113, 114 109 94, 95 114 109 99, 100 100, 101 100, 101 103, 104 104 104 106 106 107 118 Series S50 50 Ohm 50 Ohm S70 70 Ohm 70 Ohm S93 93 Ohm 93 Ohm SOS 50 SOS 70 SOS 93 QC 50 QC 70 QC 93 Screw-On Slide-On Screw-On Screw-On 120 Screw-On 122 Slide-On Jacks and Receptacles Description Standard Gold Plated Crimp Style Feed Thru Adapter Standard Gold Plated Crimp Style Feed Thru Adapter Standard Gold Plated Crimp Style Feed Thru Adapter Standard Standard Standard Standard Standard Standard Twinax Twinax Triax LEPRA/CON Connector LEPRA/CON Connector Interlocking Interface LEPRA/CON Connector Page 96, 97 115, 116 110, 111 96, 97 115, 116 110, 111 96, 98 115, 116 110, 111 99, 102 101, 102 101, 102 103 103 103 106 106 107 118, 119 121 122, 123 128 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors Cable Acceptance Dimensions Standard Connectors Screw-On Series Connector Part No. Straight Plugs -- Page 94 Max. Jacket Max. Shield Max. Dielectric Max. Inner Conductor .087 2.21 .087 2.21 .093 2.36 .093 2.36 .087 2.21 .087 2.21 .088 2.24 .088 2.24 .087 2.21 .087 2.21 .087 2.21 .093 2.36 .087 2.21 .061 1.55 .061 1.55 .068 1.73 .077 1.96 .061 1.55 .061 1.55 .061 1.55 .061 1.55 .061 1.55 .061 1.55 .061 1.55 .068 1.73 .061 1.55 .050 1.27 .041 1.04 .050 1.27 .047 1.00 .050 1.27 .041 1.04 .041 1.04 .041 1.04 .050 1.27 .041 1.04 .041 1.04 .041 1.04 .041 1.04 .013 .330 .015 .381 .013 .330 .015 .381 .015 .381 .015 .381 .015 .381 .015 .381 .013 .330 .015 .381 .015 .381 .015 .381 .015 .381 .093 2.36 .093 2.36 .108 2.74 .108 2.74 .093 2.36 .093 2.36 .075 1.91 .075 1.91 .079 2.01 .079 2.01 .075 1.91 .075 1.91 .061 1.55 .059 1.50 .059 1.50 .061 1.55 .059 1.50 .059 1.50 .013 .330 .015 .381 .015 .381 .013 .330 .015 .381 .015 .381 .134 3.40 .134 3.40 .154 3.91 .134 3.40 .155 3.94 .134 3.40 .134 3.40 .118 2.99 .118 2.99 .118 2.99 .118 2.99 .125 3.18 .118 2.99 .118 2.99 .100 2.54 .100 2.54 .101 2.67 .097 2.446 .107 2.72 .100 2.54 .100 2.54 .013 .330 .015 .381 .015 .381 .031 .787 .015 .381 .015 .381 .015 .381 S-50 032-0021-0001 032-0023-0001 032-0025-0001 032-0033-0001 032-0097-0001 032-0098-0001 032-0155-0001 032-0156-0001 052-0213-0001 052-0235-0001 052-0235-0003 052-0370-0001 052-0542-0001 S-70 032-0010-0001 032-0022-0001 032-0067-0001 032-0078-0001 032-0222-0001 052-0092-0001 S-93 032-0011-0001 032-0017-0001 032-0071-0001 032-0092-0001 032-0099-0001 052-0200-0001 Coaxial Connectors 032-0066-0001 4 129 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors Cable Acceptance Dimensions (Continued) Screw-On Series (Continued) Max. Shield .092 2.34 .092 2.34 .092 2.34 .111 2.81 .060 1.52 .060 1.52 .060 1.52 .074 1.88 .111 2.81 .111 2.81 .111 2.81 .074 1.88 .074 1.88 .074 1.88 .123 3.12 .118 2.99 .118 2.99 .123 3.12 .123 3.12 .118 2.99 Any 052-0304-0022 .134 3.40 .155 3.94 .155 3.94 .134 3.40 .134 3.40 .155 3.94 Any .012 .305 .012 .305 .012 .305 .012 .305 .012 .305 .012 .305 Connector Part No. Max. Jacket Max. Shield Max. Dielectric Max. Inner Conductor 031-0033-0001 .088 2.24 .087 2.21 .079 2.01 .061 1.55 .061 1.55 .061 1.55 .041 1.04 .041 1.04 .041 1.04 .021 .533 .021 .533 .021 .533 .093 2.36 .093 2.36 .109 2.77 .075 1.91 .075 1.91 .079 2.01 .059 1.50 .059 1.50 .059 1.50 .021 .533 .021 .533 .021 .533 .134 3.40 .134 3.40 .154 3.91 .154 3.91 .118 2.99 .118 2.99 .118 2.99 .118 2.99 .100 2.54 .100 2.54 .101 2.57 .101 2.57 .021 .533 .021 .533 .021 .533 .021 .533 Right-Angle Plugs -- Page 95 Max. Dielectric Nom. Inner Conductor Max. Jacket Connector Part No. S-50 032-0015-0001 052-0204-0001 052-0215-0001 052-0337-0001 Any Any Any Any .012 .305 .012 .305 .012 .305 .012 .305 S-70 032-0013-0001 052-0299-0001 052-0379-0001 Any Any Any .012 .305 .012 .305 .012 .305 S-93 032-0014-0001 032-0068-0001 032-0153-0001 052-0207-0001 052-0298-0001 Jacks -- Page 96 Any Any Any Any S-50 031-0034-0001 051-0467-0001 S-70 031-0036-0001 031-0048-0001 031-0090-0001 S-93 031-0032-0001 031-0037-0001 031-0088-0001 031-0089-0001 130 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors Cable Acceptance Dimensions (Continued) Slide-On Series Straight Plugs -- Page 100 Max. Jacket Max. Shield Max. Dielectric Max. Inner Conductor .088 2.24 .088 2.24 .058 1.47 .058 1.47 .041 1.04 .041 1.04 .015 .381 .015 .381 .093 2.36 .093 2.36 .108 2.74 .075 1.71 .075 1.71 .079 2.01 .059 1.50 .059 1.50 .059 1.50 .015 .381 .015 .381 .015 .381 .134 3.40 .134 3.40 .154 3.91 .118 2.99 .118 2.99 .118 2.99 .100 2.54 .100 2.54 .101 2.57 .015 .381 .015 .381 .015 .381 Max. Jacket Max. Shield Max. Dielectric Nom. Inner Conductor .092 2.34 .060 1.52 Any .012 .305 .111 2.82 .074 1.88 Any .012 .305 .123 3.12 .118 2.99 Any 032-0083-0001 .134 3.40 .155 3.94 Any .012 .305 .012 .305 Connector Part No. Max. Jacket Max. Shield Max. Dielectric Max. Inner Conductor .088 2.24 .088 2.24 .061 1.55 .061 1.55 .041 1.04 .041 1.04 .021 .533 .021 .533 .108 2.74 .079 2.01 .059 1.50 .021 .533 .134 3.40 .134 3.40 .154 3.91 .154 3.91 .118 2.99 .118 2.99 .118 2.99 .118 2.99 .100 2.54 .100 2.54 .101 2.57 .101 2.57 .021 .533 .021 .533 .021 .533 .021 .533 Connector Part No. SOS-50 032-0055-0001 032-0056-0001 SOS-70 032-0060-0001 032-0061-0001 032-0087-0001 SOS-93 032-0058-0001 032-0077-0001 032-0084-0001 Right-Angle Plugs -- Page 101 Connector Part No. SOS-50 032-0063-0001 SOS-70 032-0062-0001 SOS-93 032-0059-0001 Jacks -- Page 101 Coaxial Connectors SOS-50 031-0053-0001 031-0054-0001 SOS-70 031-0095-0001 SOS-93 031-0063-0001 031-0064-0001 031-0093-0001 031-0094-0001 4 131 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors Cable Acceptance Dimensions (Continued) Quick-Connect Series Max. Shield .093 2.36 .093 2.36 .058 1.47 .058 1.47 .041 1.04 .013 .330 .015 .381 .093 2.36 .093 2.36 .108 2.74 .075 1.91 .075 1.71 .079 2.01 .061 1.55 .059 1.50 .059 1.50 .013 .330 .015 .381 .015 .381 .134 3.40 .134 3.40 .154 3.91 .118 2.99 .118 2.99 .118 2.99 .100 2.54 .100 2.54 .101 2.57 .013 .330 .015 .381 .015 .381 Connector Part No. Max. Jacket Max. Shield Max. Dielectric Nom. Inner Conductor 032-0026-0001 .092 2.34 .060 1.52 Any .012 .305 .111 2.82 .074 1.88 Any .012 .305 .123 3.12 .118 2.99 Any 052-0228-0001 .134 5.40 .155 3.94 Any .012 .305 .012 .305 Connector Part No. Max. Jacket Max. Shield Max. Dielectric Max. Inner Conductor 031-0038-0001 .093 2.36 .061 1.55 .041 1.04 .021 .533 031-0040-0001 .134 3.40 .118 2.99 .100 2.54 .021 .533 Connector Part No. Max. Jacket Max. Shield Max. Dielectric 032-0088-0001 .167 4.24 .123 3.12 .123 3.12 .167 4.24 .142 3.60 .092 2.34 .092 2.34 .142 3.61 .061 1.55 .042 1.07 .042 1.07 .061 1.55 Max. Inner Conductor .014 .356 .014 .356 .014 .356 .014 .356 Connector Part No. Max. Jacket Max. Shield Max. Dielectric 051-0358-0001 .167 4.24 .167 4.24 .142 3.60 .142 3.61 .061 1.55 .061 1.55 Straight Plugs -- Page 104 Max. Dielectric Max. Inner Conductor Max. Jacket Connector Part No. QC-50 032-0002-0001 032-0030-0001 Any QC-70 032-0016-0001 032-0031-0001 032-0079-0001 QC-93 032-0012-0001 032-0032-0001 032-0072-0001 Right-Angle Plugs -- Page 104 QC-50 QC-70 032-0027-0001 QC-93 032-0020-0001 Jacks -- Page 105 QC-50 QC-93 Twinax Plugs -- Page 106 032-0093-0001 052-0229-0001 052-0324-0001 Jacks -- Page 106 051-0389-0001 Max. Inner Conductor .020 .508 .020 .508 132 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors Cable Acceptance Dimensions (Continued) Triax Plugs -- Page 107 Connector Part No. Max. Jacket 052-0130-0001 .124 3.15 .183 4.65 .214 5.44 052-0138-0001 052-0593-0001 Gold Plated Crimp Style Coaxial Connectors Straight Plugs -- Pages 113, 114 Connector Part No. 50 Ohm Series 132-0112-000* 132-0113-000* 132-0114-000* 132-0115-000* 132-0509-0002 Max. Outer Dielectric .085 2.26 .146 3.71 .166 4.22 Max. Outer Shield Single Shield Single Shield Single Shield Max. Jacket Max. Dielectric Nom. Inner Conductor .088 2.24 .088 2.24 .110 2.79 .110 2.79 .116 2.95 .039 .991 .039 .991 .070 1.78 .070 1.78 .070 1.78 .012 .305 .012 .305 .012 .305 .012 .305 .012 .305 .110 2.79 .110 2.79 .070 1.78 .070 1.78 .012 .305 .012 .305 .155 3.94 .155 3.94 .107 2.72 .107 2.72 .012 .305 .012 .305 Max. Jacket Max. Dielectric Nom. Inner Conductor .088 2.24 .088 2.24 .110 2.79 .110 2.79 .039 .991 .039 .991 .074 1.88 .074 1.88 .012 .305 .012 .305 .012 .305 .012 .305 .110 2.79 .110 2.79 .074 1.88 .074 1.88 .012 .305 .012 .305 .155 3.94 .155 3.94 .107 2.72 .107 2.72 .012 .305 .012 .305 Max. Inner Shield Single Shield .118 2.99 .161 4.09 Max. Inner Dielectric .041 1.04 .107 2.72 .131 3.33 Max. Inner Conductor .014 .356 .014 .356 .020 .508 70 Ohm Series 132-0200-000* 132-0201-000* 93 Ohm Series 132-0300-000* 132-0301-000* Right-Angle Plugs -- Page 114 Connector Part No. 50 Ohm Series 132-0116-0002 132-0118-0002 132-0119-0002 Coaxial Connectors 132-0117-0002 70 Ohm Series 132-0202-0002 132-0203-0002 93 Ohm Series 132-0302-0002 132-0303-0002 4 133 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors Cable Acceptance Dimensions (Continued) Gold Plated Crimp Style Coaxial Connectors (Continued) Jacks -- Page 115 Connector Part No. 50 Ohm Series 131-0134-0001 131-0135-0001 131-0136-0001 131-0137-0001 Max. Jacket Max. Dielectric Nom. Inner Conductor .088 2.24 .088 2.24 .110 2.79 .110 2.79 .039 .991 .039 .991 .070 1.78 .070 1.78 .012 .305 .012 .305 .012 .305 .012 .305 .110 2.79 .110 2.79 .070 1.78 .070 1.78 .012 .305 .012 .305 .155 3.94 .155 3.94 .107 2.72 .107 2.72 .012 .305 .012 .305 Max. Jacket .081 2.06 Max. Dielectric .040 1.02 Nom. Inner Conductor .012 .305 70 Ohm Series 131-0200-0001 131-0201-0001 93 Ohm Series 131-0300-0001 131-0301-0001 LEPRA/CON Connectors All -- Pages 118-126 Connector Part No. All 134 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors Hermetic Connectors Coaxial Screw-On, Slide-On Series Material and Finish Service and Performance Data 50 Connector uses 10-32 thread. 70 Connector uses 12-32 thread. 93 Connector uses 1/4-32 thread. Housing (1) -- Cold rolled steel silver plate. Gasket (2) -- Neoprene or silicone rubber. Insulator (3) -- TEFLON. Glass Seal (4) Center Contact (5) -- Nickel Iron alloy contact with slotted turret type solder pot (other terminations available). Temperature Range -- -65F to 450F [-54C to 232C] . Electrical -- 750 VAC working voltage. Performance -- 1200 VAC test at sea level. Insulation Resistance -- 5000 megohms at 500 VDC (room temperature). Shock -- 100 G's minimum. Pressure -- 100 PSI minimum. Leak Rate Per Seal -- Less than 1.04 x 10-8 cc/sec. (.001 Micron cubic ft/hr) of 100% helium tested at one atmosphere pressure differential far exceeding requirements of MIL-C-26500 and MIL-C-26482. Plating -- Silver unless otherwise specified. X Bulkhead Solder Mount A .25 [6.35] .125 [3.18] .281 [7.14] .125 [3.18] D OC OB X D A .438 [11.13] X Y OC .438 [11.13] A .125 Typ. [3.18] D Fig. 1 OC OB OB Fig. 2 Part No. Fig. 051-0049-0001 1 051-0056-0001 1 053-0228-0001 2 051-0315-0001 3 A .563 14.30 .563 14.30 .594 15.09 .656 16.66 Fig. 3 B Dia. .25 6.35 .313 7.95 .25 6.35 .25 6.35 C Dia. .015 .200 5.08 .251 6.38 .227 5.77 .195 4.95 D .125 3.18 .125 3.18 .234 5.94 .063 1.60 X* Y* S-50 -- S-93 -- S-50 S-50 S-50 -- * "S" indicates Screw-On Series Dimensions are subject to change without notice. .328 [8.33] OB A Glass Seal A O .203 [5.16] Y X D .063 [1.60] Coaxial Connectors A Bulkhead Solder Mount, Panel Insulated Y X OC OC OB .047 [1.19] .125 [3.18] .063 [1.60] D Fig. 1 C .047 [1.19] Glass Seal Fig. 2 Part No. Fig. 051-0232-0001 1 053-0227-0001 2 053-0412-0001 2 053-0028-0001 3 A .563 14.30 .609 15.47 .609 15.47 .609 15.47 B Dia. .406 10.31 .625 15.88 .625 15.88 .625 15.88 Y X B .063 [1.60] Fig. 3 C Dia. .370 9.40 .540 13.72 .540 13.72 .540 13.72 D .172 4.37 .297 7.54 .297 7.54 .297 7.54 X* 4 Y* S-50 S-50 S-50 S-93 S-93 SOS-50 S-50 * "S" indicates Screw-On Series; "SOS" indicates Slide-On Series Dimensions are subject to change without notice. 135 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors Hermetic Connectors (Continued) Coaxial Screw-On, Slide-On Series A (Continued) G .094 [2.38] Microminiature Coaxial Receptacles Y B X Hex. M D H C Thd. E Mounting Hole F Part No. 053-0455-0001 053-0636-0001 A .688 17.46 .922 23.42 B Hex. .563 14.29 .625 15.88 C Thd. 5/16-32 UNEF-2A 3/8-32 UNEF-2A D .297 7.54 .344 8.73 E .094 2.38 .078 1.98 F .203 5.16 .203 5.16 G .25 6.35 .438 11.11 H .312 7.92 .375 9.53 M .291 7.39 .347 8.81 X* Y* S-50 S-50 S-93 S-93 * "S" indicates Screw-On Series Dimensions are subject to change without notice. Solder Mount Slide-On Series Receptacles A OC X OB E D Part No. A .563 14.29 .563 14.29 051-0134-0001 051-0158-0001 B Dia. .375 9.53 .25 6.35 C Dia. .015 .309 7.85 .200 5.08 D .172 4.37 .125 3.18 E .031 .794 .047 1.19 X* SOS-50, 70, 93 SOS-50, 70, 93 * "SOS" indicates Slide-On Series Dimensions are subject to change without notice. Single Hole Mount Receptacles A D .094 [2.38] X H B Hex. C Thd. Mounting Hole E F Part No. 051-0249-0001 051-0154-0001 A .563 14.29 .656 16.67 B Hex. .375 9.53 .625 15.88 C Thd. 12-32 UNEF-2A 3/8-32 UNEF-2A D .078 1.98 .156 3.97 E .109 2.78 .078 1.98 F .234 5.95 .203 5.16 H .218 5.54 .375 9.53 X* S-50 S-93 * "S" indicates Screw-On Series Dimensions are subject to change without notice. 136 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 NANONICS Connectors Table of Contents Nano-Miniature Connectors Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 Nano-Miniature Connectors Technical and Performance Data . . . . . . . . . . . . . . . . . 140 DUALOBE Rectangular Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141-178 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 Wired Connectors Single Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142 Two Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 Part Numbering Guideline for Wired Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144 Jumper Assemblies Single Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145, 146 Two Row Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147, 148 Part Numbering Guideline for Jumper Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . 149 Surface Mount Connectors Horizontal Single Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 Two Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151 Vertical Single Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152-154 Two Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155, 156 Thru-Hole Connectors Horizontal 1 Row to 2 Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 2 Row to 4 Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158 Vertical 1 Row to 2 Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159 2 Row to 4 Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 Part Numbering Guideline for SMT and Through-Hole Connectors . . . . . . . . . . . . . . 161 Flex Termination "Duckbill" Connectors Two Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162, 163 Part Numbering Guideline for Flex Termination "Duckbill" Connectors . . . . . . . . . . . . 163 Solder Cup Connectors Single Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164 Two Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 Part Numbering Guideline for Solder Cup Termination . . . . . . . . . . . . . . . . . . . . . . . . 166 Panel Mount Connectors Single Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 Two Row . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168 Part Numbering Guideline for Panel Mount Connectors . . . . . . . . . . . . . . . . . . . . . . . 169 Part Number Index Cross Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170-178 137 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 NANONICS Connectors Table of Contents (Continued) Circular Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179-196 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179 Quick Disconnect Plug Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180, 181 Plug Assemblies with Backshells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182, 183 Receptacle Assemblies, Flush Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184, 185 Threaded Coupling Plug Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 186, 187 Plug Assemblies with Backshells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188, 189 Receptacle Assemblies, Panel Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190, 191 Panel Mount Receptacle Assemblies w/Backshells. . . . . . . . . . . . . . . . . . . . . . . 192, 193 Part Numbering Guideline for Environmentally Sealed Circular Connectors. . . . . . . . 194 Part Number Index Cross Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195 Coaxial Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197-206 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197 Typical VSWR and Insertion Loss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198 50 Ohm Coax Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199 Part Numbering Guideline for 50 Ohm Coax Connectors . . . . . . . . . . . . . . . . . . . . . . . 200 Horizontal SMT 50 Ohm Coax Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201 Part Numbering Guideline for Horizontal SMT 50 Ohm Coax Connectors . . . . . . . . . . 202 50 Ohm Coax with Mixed Signal Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203 Part Numbering Guideline for 50 Ohm Coax w/Mixed Signal Connectors . . . . . . . . . . 204 Part Number Index Cross Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205 Strip Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207-214 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207 Wired Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208 Part Numbering Guideline for Strip Wired Connectors . . . . . . . . . . . . . . . . . . . . . . . . . 209 Surface Mount Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210 Thru-Hole Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211 Part Numbering Guideline for SMT and Thru-Hole Connectors . . . . . . . . . . . . . . . . . . . 212 Part Number Index Cross Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213 138 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 NANONICS Connectors Nano-Miniature Connectors - Introduction Nanonics Connectors 5 Nano-miniature connectors constitute a family of interconnect devices with center to center contact spacing of .025". In comparison to other connector families, they are often thought of as the smallest practical connector system for separable interfaces. Despite being smaller, these nano-miniature connectors are tested with a few size-related modifications per the guidelines of MIL-DTL-83513 (written for .050" micro-miniature connectors). Nano-miniature connectors combine their appealing size and weight with desired performance attributes such as high reliability, low contact resistance and wide operating temperature range, making them among the smallest and toughest connectors available to designers. The Contact System Nanonics connectors utilize the same contact system throughout the entire product family. This contact system uses a "spring socket" as opposed to most connector designs, which use a "spring pin". In this design, the socket member of the contact pair employs a dimple located inside the contact tube. When the pin is engaged with this socket, the dimple creates the desired spring action by forcing the pin to offset to the opposite side of the socket tube. The result is a gold-on-gold mating area covering a minimum of 180 of the contact surface. This also creates a desirable mating force of no greater than 6 ounces per contact and a resistance of .003 ~ .008 ohms. This type of contact system begins with a preplated BeCu alloy material that is then formed to yield a rugged, seamless contact. Both the blind-bore seamless pin and the seamless one piece socket have a burnished gold finish on both the inside and outside surfaces. This gold finish provides contact integrity for superior reliability and environmental performance. Contact Configuration Crimp Area Seamless Blind-Bore Pin Wire Stop Dimple for Engaging Force 139 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 NANONICS Connectors Nano-Miniature Connectors Technical and Performance Data Electrical Environmental Contact Resistance - .003 - .008 ohms Current Rating - 1 amp max. per contact Dielectric Withstanding Voltage - Volts RMS 60 Hz at room ambient conditions. At sea level 500V. At 70,000 ft. 150V. Insulation Resistance - 5000 megohms min. (@ 500 VDC) at room ambient conditions. Magnetic Permeability - 2 mu max. Temperature Range - -200 C to +200 C Shock - No discontinuity in excess of 1 sec. when tested in accordance with MIL-STD-1344, Method 2004.1, Test Condition E. Vibration - No discontinuity in excess of 1 sec. when tested in accordance with MIL-STD-1344, Method 2005.1, Test Condition IV. Solderability - Connectors shall meet the test requirements of MIL-STD-202, Method 208. Durablity - No mechanical or electrical defects detrimental to the function of the connectors after 500 cycles of mating and unmating, without the use of hardware. Humidity - After exposure to humidity as specified by MIL-STD-1344, Method 1002.2, Type II, IR shall be 1 megohm min. (@ 100 VDC) within 2 hours of conditioning and 1000 megohms min. (@ 100 VDC) after 24 hours of conditioning. Mechanical Contact Engagement & Separation - Engaging force is 6.0 oz. max. Separation force is 0.5 oz. min. Mating Force Maximum - Calculated as 10 oz. multiplied by the number of contacts. Material and Finish Salt Spray - Connectors shall meet the performance requirements of contact resistance, mating and unmating forces, and contact retention after being subjected to the 48 hour 5 % solution salt spray test per MIL-STD-1344, Method 1001, Condition B. Fluid Immersion - Unmated connectors after being fully immersed in one of the following fluids, for the prescribed time, will mate at a force of 10 oz. multiplied by the number of contacts or less: Perchloroethylene, 2 hours; Lubricating oil per MIL-L-23699, 20 hours. Crimp Tensile Strength - (Unassembled contacts with crimped stranded wire terminations) Wires will not pull out of the contacts when the following axial load is applied: #30 AWG, 2 lbs. Thermal Vacuum Outgassing - Connectors shall have a maximum total mass loss (TML) of 1.0 % of the original specimen mass and a maximum collected volatile condensable materials (CVCM) content of 0.1 % of the original specimen mass when tested in accordance with SP-R-0022A. Contacts - BeCu alloy plated with gold per MIL-G-45204 Type II over nickel per QQ-N-290. Plastic Insulators and Shells - 30% glassed filled Liquid Crystal Polymer (LCP). Metal Shells - 6061-T6 Aluminum with electroless nickel plating per MILC-26074. Stainless steel and gold plated shells are also available. 140 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 DUALOBE Rectangular Connectors DUALOBE Rectangular Connectors DUALOBE Rectangular Connectors 5 Nanonics D-style rectangular connectors have earned the distinction of being the most popular and widely utilized style of Nano connectors. These connectors incorporate the DUALOBE polarization scheme. This polarization scheme negates the need for mating guide pins and does not increase the package size. The DUALOBE series of connectors are available in both machined aluminum and molded plastic shells, both in one and two row connector housings. Single row configurations commonly have standard pin counts from 5 to 51, while the higher density two row configurations have pin counts from 9 to 65. These connectors can be terminated in many different ways. Standard configurations include wires, surface mount, thru-hole, solder cup, "duckbill", and panel mount. Wired harness assemblies and custom configurations can also be accommodated. Such custom configurations include filtered, hermetic, environmentally sealed, and blind mate connectors. This family of connectors is designed to meet the requirements of MIL-DTL83513, with a few size related modifications. Designed primarily for the military and aerospace industry, the DUALOBE series is especially well suited when high reliability, coupled with reduced size and weight, are serious design parameters. A clear example of this is the use of Nanonics connectors in such applications as smart munitions, missile defense, aircraft communications, and UAV's. In addition to the above applications, with the wide temperature range of the DUALOBE connector (-200C to +200C), the space and petroleum industries have also found many uses for this connector. The performance and reliability at cryogenic temperatures, along with the low outgassing material properties, has led to an increased usage in space applications. Such applications include nitrogencooled optics, low and high earth orbiting satellites, telescopes, deep space probes, orbiters, and rovers. On the opposite end of the spectrum, the petroleum exploration industry utilizes these connectors for their performance and reliability in downhole environments at temperatures exceeding 150C. 141 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 DUALOBE Rectangular Connectors Wired Connectors -- Single Row, Flying Leads .075 [1.91] 2 Plcs. .117 [2.97] .205 [5.21] .112 [2.84] 2 Plcs. .223 [5.66] Plug B B Position 1 .038 [0.97] Typ. .038 [0.97] Typ. C Position 1 .086 [2.18] .043 [1.09] 2 Plcs. .043 [1.09] 2 Plcs. .086 [2.18] L L C Receptacle Plug with Flying Leads Drawing Number 1589455 Receptacle with Flying Leads Drawing Number 1589457 Product Facts n n n n Plastic or Metal Shell Standard Sizes: 5, 9, 15, 25, 37, and 51 Factory wired to your specifications Contact Tyco Electronics for custom configurations Size 5 9 15 25 37 51 0.233 0.333 0.483 0.733 1.033 1.383 B [5.92] [8.46] [12.27] [18.62] [26.24] [35.13] Dimensions C 0.3085 [7.84] 0.4085 [10.38] 0.5585 [14.19] 0.8085 [20.54] 1.1085 [28.16] 1.4585 [37.05] L 0.100 [2.54] 0.200 [5.08] 0.350 [8.89] 0.600 [15.24] 0.900 [22.86] 1.250 [31.75] 142 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 DUALOBE Rectangular Connectors Wired Connectors -- Two Row, Flying Leads DUALOBE Rectangular Connectors .075 [1.91] 2 Plcs. .205 [5.21] Plug .117 [2.97] B Position 1 .126 [3.20] B C .058 [1.47] 2 Plcs. Receptacle .112 [2.84] 2 Plcs. .223 [5.66] .038 [0.97] Typ. .040 [1.02] Typ. L .058 2 Plcs. [1.47] Position 1 .126 [3.20] .040 [1.02] Typ. L Position "Size" .038 [0.97] Typ. C Position "Size" Plug with Flying Leads Drawing Number 1589472 Receptacle with Flying Leads Drawing Number 1589476 Product Facts n n n n Plastic or Metal Shell Standard Sizes: 9, 15, 25, 37, 51 and 65 Factory wired to your specifications Contact Tyco Electronics for custom configurations Size 9 15 25 37 51 65 0.229 0.304 0.429 0.579 0.754 0.929 B [5.82] [7.72] [10.90] [14.71] [19.15] [23.60] Dimensions C 0.3085 [7.84] 0.3835 [9.74] 0.5085 [12.92] 0.6585 [16.73] 0.8335 [21.17] 1.0085 [25.62] L 0.100 [2.54] 0.175 [4.45] 0.300 [7.62] 0.450 [11.43] 0.625 [15.88] 0.800 [20.32] 143 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 5 DUALOBE Rectangular Connectors Part Numbering Guideline for Wired Connectors DUALOBE Connectors - Wire Terminations S X X XXX XX X XX XXX Class X Threads/Jackscrew S Dualobe Threads (Receptacles Only) Jackscrews (Plugs Only) Rows N Thread for 1.0 mm Jackscrews M 1.0 mm Non Captive Jackscrew S 1 Row Q Thread for 1.2 mm Jackscrews Conductor Length Type L N 1.0 mm Captive Jackscrew Q 1.2 mm Captive Jackscrew T 2 Row LCP (Plastic) M Metal (Al, Ni Plate) XXX Three numbers only, length is in inches ( i.e. 012 = twelve inches) CXX A "C" followed by two numbers, length is in centimeters ( i.e. C06 = six centimeters) MXX An "M" followed by two numbers, length is in meters ( i.e. M02 = two meters) Positions 005 5 Position (single row only) Conductor Type 009 9 Position DX White TEFLON DM Color Coded TEFLON per MIL-STD-681 015 15 Position DY White PTFE M16878/6 DT White TEFZEL M22759/33 025 25 Position DC Color Coded TEFLON GX TEFLON Ribbon Cable FEP 037 37 Position 051 51 Position Conductor Size/Strands 065 65 Position (two row only) 0 28 AWG Solid 1 30 AWG Solid 2 30 AWG 7 Strand 3 32 AWG 7 Strand 4 34 AWG 7 Strand Configurations PC Plug SC Receptacle 144 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 DUALOBE Rectangular Connectors Jumper Assembly Connectors -- Single Row DUALOBE Rectangular Connectors .043 2 Plcs. [1.09] .086 [2.18] Length as Specified in Part Number Position 1 .205 [5.21] C B L 5 Plug to Receptacle .075 [1.91] 2 Plcs. Product Facts n n n n Plastic or Metal Shell Standard Sizes: 5, 9, 15, 25, 37, and 51 Factory wired to your specifications Contact Tyco Electronics for custom configurations .086 [2.18] B L .038 [.97] Typ. Plug to Plug Drawing Number 1589735 Jumper Assembly, Plug To Plug, Single Row Dualobe, Plastic or Metal 1589735 .043 2 [1.09] Plcs. .112 [2.85] 2 Plcs. C Position 1 .117 [2.97] .223 [5.66] Length as Specified in Part Number .043 [1.09] 2 Plcs. .086 [2.18] .205 [5.21] B B Position 1 L C .075 [1.91] 2 Plcs. .038 [.97] Typ. .038 [.97] Typ. .117 Position 1 [2.97] Plug to Receptacle Drawing Number 1589736 Jumper Assembly, Plug To Receptacle, Single Row Size 5 9 15 25 37 51 0.233 0.333 0.483 0.733 1.033 1.383 B [5.92] [8.46] [12.27] [18.62] [26.24] [35.13] Dimensions Dualobe, Plastic or Metal C 0.3085 [7.84] 1589736 0.4085 [10.38] 0.5585 [14.19] 0.8085 [20.54] 1.1085 [28.16] 1.4585 [37.05] L 0.100 [2.54] 0.200 [5.08] 0.350 [8.89] 0.600 [15.24] 0.900 [22.86] 1.250 [31.75] 145 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 DUALOBE Rectangular Connectors Jumper Assembly Connectors -- Single Row (Continued) .043 [1.09] 2 Plcs. .086 .112 [2.18] [2.85] 2 Plcs. L B C .223 [5.66] Length as Specified in Part Number Position 1 B Position 1 .038 [0.97] Typ. Receptacle to Receptacle Drawing Number 1589803 Jumper Assembly, Receptacle To Receptacle, Single Row Dualobe, Plastic or Metal 1589803 Size 5 9 15 25 37 51 0.233 0.333 0.483 0.733 1.033 1.383 B [5.92] [8.46] [12.27] [18.62] [26.24] [35.13] Dimensions C 0.3085 [7.84] 0.4085 [10.38] 0.5585 [14.19] 0.8085 [20.54] 1.1085 [28.16] 1.4585 [37.05] L 0.100 [2.54] 0.200 [5.08] 0.350 [8.89] 0.600 [15.24] 0.900 [22.86] 1.250 [31.75] 146 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 DUALOBE Rectangular Connectors Jumper Assembly Connectors -- Two Row DUALOBE Rectangular Connectors Position 1 .058 [1.47] 2 Plcs. .126 [3.20] .205 [5.21] Length as Specified in Part Number B L C 5 Plug to Receptacle .075 [1.91] 2 Plcs. Product Facts n n n n Plastic or Metal Shell Standard Sizes: 9, 15, 25, 37, 51 and 65 Factory wired to your specifications Contact Tyco Electronics for custom configurations .040 [1.02] Typ. .117 [2.97] .038 [.97] Typ. Jumper Assembly, Plug to Plug Two Row Dualobe, Plastic or Metal 1589737 Length as Specified in Part Number .058 [1.47] 2 Plcs. L .040 [1.02] Typ. Plug to Plug Drawing Number 1589737 .126 [3.20] B Position 1 C .112 [2.85] 2 Plcs. .223 [5.66] .126 [3.20] .205 [5.21] .058 [1.47] 2 Plcs. B B .075 [1.91] 2 Plcs. Position 1 Position 1 .117 [2.97] .038 [.97] Typ. L C .040 [1.02] Typ. .038 [.97] Typ. Plug to Receptacle Drawing Number 1589738 Jumper Assembly, Plug To Receptacle, Two Row Dualobe, Plastic or Metal 1589738 Size 9 15 25 37 51 65 0.229 0.304 0.429 0.579 0.754 0.929 B [5.82] [7.72] [10.90] [14.71] [19.15] [23.60] Dimensions C 0.3085 [7.84] 0.3835 [9.74] 0.5085 [12.92] 0.6585 [16.73] 0.8335 [21.17] 1.0085 [25.62] L 0.100 [2.54] 0.175 [4.45] 0.300 [7.62] 0.450 [11.43] 0.625 [15.88] 0.800 [20.32] 147 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 DUALOBE Rectangular Connectors Jumper Assembly Connectors -- Two Row (Continued) .126 [3.20] .223 [5.66] .058 [1.47] 2 Plcs. Length as Specified in Part Number .112 [2.85] 2 Plcs. B C L Position 1 B Position 1 .040 [1.02] Typ. .038 [.97] Typ. Receptacle to Receptacle Drawing Number 1589804 Jumper Assembly, Receptacle To Receptacle, Two Row Dualobe, Plastic or Metal 1589804 Size 9 15 25 37 51 65 0.229 0.304 0.429 0.579 0.754 0.929 B [5.82] [7.72] [10.90] [14.71] [19.15] [23.60] Dimensions C 0.3085 [7.84] 0.3835 [9.74] 0.5085 [12.92] 0.6585 [16.73] 0.8335 [21.17] 1.0085 [25.62] L 0.100 [2.54] 0.175 [4.45] 0.300 [7.62] 0.450 [11.43] 0.625 [15.88] 0.800 [20.32] 148 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 DUALOBE Rectangular Connectors Part Numbering Guideline for Jumper Assemblies DUALOBE Rectangular Connectors DUALOBE Connectors - Jumper Terminations J X X XXX XX X XX XXX Class X Threads/Jackscrews J Jumper Threads (Receptacles Only) Jackscrews (Plugs Only) Rows N Thread for 1.0 mm Jackscrews M 1.0 mm Non Captive Jackscrews S 1 Row Q Thread for 1.2 mm Jackscrews N 1.0 mm Captive Jackscrews Q 1.2 mm Captive Jackscrews T 2 Row Conductor Length Type L LCP (Plastic) M Metal (Al, Ni Plate) XXX Three numbers only, length is in inches ( i.e. 012 = twelve inches) CXX A "C" followed by two numbers, length is in centimeters ( i.e. C06 = 6 centimeters) MXX An "M" followed by two numbers, length is in meters ( i.e. M02 = 2 meters) 5 Positions 005 5 Position (single row only) Conductor Type 009 9 Position DX White Teflon DM Color Coded Teflon per MIL-STD-681 015 15 Position DY White PTFE M16878/6 DT White Tefzel M22759/33 025 25 Position DC Color Coded Teflon GX Telfon Ribbon Cable 037 37 Position 051 51 Position Conductor Size/Strands 065 65 Position (two row only) 0 28 AWG Solid 1 30 AWG Solid 2 30 AWG 7 Strand Configuration PP Plug to Plug, 1 to 1 PR Plug to Receptacle, 1 to 1 PD Plug to Plug, low to high in row RR Receptacle to Receptacle, 1 to 1 3 32 AWG 7 Strand 4 34 AWG 7 Strand 149 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 DUALOBE Rectangular Connectors Surface Mount Connectors -- Horizontal, Single Row A .025 [.64] Pitch .205 [5.21] .075 [.69] 2 Plcs. .020 [.51] Typ. .255 [6.48] Typ. .117 [2.97] Jackscrews Omitted for Clarity Receptacle B Position 1 .038 [.97] Typ. Product Facts n n n n Plastic or Metal Shell Standard Sizes: 5, 9, 15, 25, 37, and 51 Contact Tyco Electronics for custom configurations Suggested pad layouts are available on the referenced drawings on the Tyco Electronics website .043 2 Plcs. [1.09] .086 [2.18] L C Plug Assembly Drawing Number 1589460 A Plug Assembly, .020 Horizontal Surface Typ. Mount, [.51] Single Row Dualobe, Plastic or Metal .025 [.64] Pitch 1589460 .273 [6.93] Typ. .223 [5.66] .112 [2.84] 2 Plcs. B B Position 1 .038 [.97] Typ. .043 2 Plcs. [1.09] .086 [2.18] L C Receptacle Assembly Drawing Number 1589462 Size 5 9 15 25 37 51 Dimensions A 0.050 [1.27] 0.100 [2.54] 0.175 [4.45] 0.300 [7.62] 0.450 [11.43] 0.625 [15.88] Receptacle Assembly, Horizontal Surface Mount, Single Row Dualobe, Plastic or Metal B 0.233 0.333 0.483 0.733 1.085 1.383 [5.92] [8.46] [12.27] [18.62] [26.24] [35.13] C 0.3085 0.4085 0.5585 0.8085 1.1085 1.4585 L 0.100 [2.54] 0.200 [5.08] 0.350 [8.89] 0.600 [15.24] 0.900 [22.86] 1.250 [31.75] 1589462 [7.84] [10.38] [14.19] [20.54] [28.16] [37.05] 150 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 DUALOBE Rectangular Connectors Surface Mount Connectors -- Horizontal, Two Row .020 [.51] Typ. .112 2 Plcs. [2.84] .223 [5.66] DUALOBE Rectangular Connectors A .025 Pitch [.64] .0125 [.318] Offset .273 [6.93] Typ. .323 Typ. [8.20] 5 Receptacle B Product Facts n n n n Position 1 .038 [.97] Typ. .040 [1.02] Typ. B Plastic or Metal Shell Standard Sizes: 9, 15, 25, 37, 51 and 65 Contact Tyco Electronics for custom configurations Suggested pad layouts are available on the referenced drawings on the Tyco Electronics website .058 [1.47] 2 Plcs. .126 [3.20] Position `Size' L C Receptacle Assembly Drawing Number 1589483 A .025 [.64] Pitch .0125 [.318] Offset .020 Typ. [.51] .075 Receptacle Assembly, [.69] 2 Plcs. Horizontal Surface Mount, Two Row Dualobe, Plastic or Metal .305 .255 [7.75] Typ. [6.48] Typ. 1589483 .117 [2.97] .205 [5.21] Jackscrews Omitted for Clarity B Position 1 .038 Typ. [.97] .040 [1.02] Typ. .058 2 Plcs. [1.47] .126 [3.20] L C Position `Size' Plug Assembly Drawing Number 1589490 Size 9 15 25 37 51 65 Dimensions A 0.050 [1.27] 0.875 [2.23] 0.150 [3.81] 0.225 [5.72] 0.313 [7.95] 0.400 [10.16] B 0.229 0.304 0.429 0.579 0.754 0.929 [5.82] [7.72] [10.90] [14.71] [19.15] [23.60] C 0.3085 0.3835 0.5085 0.6585 0.8335 1.0085 Plug Assembly, Horizontal SurfaceLMount, Two Row Dualobe, Plastic or Metal [7.84] 0.100 [2.54] [9.74] [12.92] [16.73] [21.17] [25.62] 0.175 [4.45] 0.300 [8.89] 0.450 [11.43] 0.625 [15.88] 0.800 [20.32] 1589490 151 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 DUALOBE Rectangular Connectors Surface Mount Connectors -- Vertical, Single Row C Position 1 L .038 [.97] Typ. .086 [2.18] .043 [1.09] 2 Plcs. .025 [.64] Pitch A Receptacle B B Product Facts n n n n Plastic or Metal Shell Standard Sizes: 5, 9, 15, 25, 37, and 51 Contact Tyco Electronics for custom configurations Suggested pad layouts are available on the referenced drawings on the Tyco Electronics website .112 [2.84] 2 Plcs. .223 [5.66] .030 [.76] Typ. Receptacle Assembly Drawing Number 1589463 Receptacle Assembly, Vertical Surface Mount, Single Row Dualobe, Plastic or Metal C 1589463 L Position 1 .038 [.97] Typ. .086 [2.18] .043 2 Plcs. [1.09] .025 Pitch [.64] A B .117 [2.97] .205 [5.21] .030 [.76] Typ. .075 [1.91] 2 Plcs. Plug Assembly Drawing Number 1589465 Size 5 9 15 25 37 51 Plug Assembly, Vertical Surface Mount, Single Row Dualobe, Plastic or Metal Dimensions A 0.050 [1.27] 0.100 [2.54] 0.175 [4.45] 0.300 [7.62] 0.450 [11.43] 0.625 [15.88] B 0.233 0.333 0.483 0.733 1.085 1.383 [5.92] [8.46] [12.27] [18.62] [26.24] [35.13] C 0.3085 0.4085 0.5585 0.8085 1.1085 1.4585 [7.84] [10.38] [14.19] [20.54] [28.16] [37.05] L 1589465 0.100 [2.54] 0.200 [5.08] 0.350 [8.89] 0.600 [15.24] 0.900 [22.86] 1.250 [31.75] 152 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 DUALOBE Rectangular Connectors Surface Mount Connectors -- Vertical, Single Row with Alternating Leads n n n n DUALOBE Rectangular Connectors Product Facts C Plastic or Metal Shell Standard Sizes: 5, 9, 15, 25, 37, and 51 Contact Tyco Electronics for custom configurations Suggested pad layouts are available on the referenced drawings on the Tyco Electronics website Position 1 L .025 [.64] .038 [.97] Typ. .086 [2.18] .043 2 Plcs. [1.09] .050 [1.27] Pitch 5 A B B .112 [2.84] 2 Plcs. .223 [5.66] .030 [.76] Typ. Receptacle Assembly Drawing Number 1589464 C Receptacle Assembly, Vertical Surface Mount, Alternating Leads Single Row Dualobe, Plastic or Metal L 1589464 .025 [.64] .038 Typ. [.97] .086 [2.18] .043 2 Plcs. [1.09] .050 Pitch [1.27] Position 1 A B .117 [2.97] .205 [5.21] .075 [1.91] 2 Plcs. .030 [.76] Typ. Plug Assembly Drawing Number 1589466 Size 5 9 15 25 37 51 Plug Assembly, Vertical Surface Mount, Alternating Leads Single Row Dualobe, Plastic or Metal Dimensions A 0.050 [1.27] 0.100 [2.54] 0.175 [4.45] 0.300 [7.62] 0.450 [11.43] 0.625 [15.88] B 0.233 0.333 0.483 0.733 1.085 1.383 [5.92] [8.46] [12.27] [18.62] [26.24] [35.13] 1589466 C 0.3085 0.4085 0.5585 0.8085 1.1085 1.4585 L [7.84] [10.38] [14.19] [20.54] [28.16] [37.05] 0.100 [2.54] 0.200 [5.08] 0.350 [8.89] 0.600 [15.24] 0.900 [22.86] 1.250 [31.75] 153 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 DUALOBE Rectangular Connectors Surface Mount Connectors -- Vertical, Single Row with Integrated Standoffs Product Facts n n n n C Position 1 Metal Shell Standard Sizes: 5 , 9, 15, 25, 37, and 51 Contact Tyco Electronics for custom configurations Suggested pad layouts are available on the referenced drawings on the Tyco Electronics website L .038 [.97] Typ. .086 [2.18] .043 [1.09] 2 Plcs. .025 [.64] Pitch A B .223 [5.66] .253 [6.43] .072 [1.83] 2 Plcs. Receptacle Assembly Drawing Number 1589467 Receptacle Assembly, Vertical Surface Mount, Single Row Dualobe, Metal w/ Integrated Standoffs 1589467 Size 5 9 15 25 37 51 Dimensions A 0.050 [1.27] 0.100 [2.54] 0.175 [4.45] 0.300 [7.62] 0.450 [11.43] 0.625 [15.88] B 0.233 0.333 0.483 0.733 1.085 1.383 [5.92] [8.46] [12.27] [18.62] [26.24] [35.13] C 0.3085 0.4085 0.5585 0.8085 1.1085 1.4585 [7.84] [10.38] [14.19] [20.54] [28.16] [37.05] L 0.100 [2.54] 0.200 [5.08] 0.350 [8.89] 0.600 [15.24] 0.900 [22.86] 1.250 [31.75] 154 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 DUALOBE Rectangular Connectors Surface Mount Connectors -- Vertical, Two Row DUALOBE Rectangular Connectors C Position 1 L .0125 [.318] Offset .058 [1.47] 2 Plcs. .038 [.97] Typ. .040 [1.02] Typ. .126 [3.20] .025 [.64] Pitch A Receptacle 5 B B Product Facts n n n n Plastic or Metal Shell Standard Sizes: 9, 15, 25, 37, 51 and 65 Contact Tyco Electronics for custom configurations Suggested pad layouts are available on the referenced drawings on the Tyco Electronics website .112 [2.84] 2 Plcs. .223 [5.66] .030 [.76] Typ. Receptacle Assembly, Vertical Surface Mount, Two Row Dualobe, Plastic or Metal Receptacle Assembly Drawing Number 1589484 1589484 C L Position 1 .126 [3.20] .0125 [.318] Offset .038 [.97] Typ. .040 [1.02] Typ. .058 [1.47] 2 Plcs. .025 [.64] Pitch A B .117 [2.97] .205 [5.21] .075 [1.91] 2 Plcs. .030 [.76] Typ. Plug Assembly Drawing Number 1589485 Plug Assembly, Vertical Surface Mount, Two Row Dualobe, Plastic or Metal Size 9 15 25 37 51 65 Dimensions A 0.050 [1.27] 0.875 [2.23] 0.150 [3.81] 0.225 [5.72] 0.313 [7.95] 0.400 [10.16] B 0.229 0.304 0.429 0.579 0.754 0.929 [5.82] [7.72] [10.90] [14.71] [19.15] [23.60] C 0.3085 0.3835 0.5085 0.6585 0.8335 1.0085 L [7.84] [9.74] [12.92] [16.73] [21.17] [25.62] 1589485 0.100 [2.54] 0.175 [4.45] 0.300 [8.89] 0.450 [11.43] 0.625 [15.88] 0.800 [20.32] 155 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 DUALOBE Rectangular Connectors Surface Mount Connectors -- Vertical, Two Row with Integrated Standoffs Product Facts n n n n C Metal Shell Standard Sizes: 9, 15, 25, 37, 51 and 65 Contact Tyco Electronics for custom configurations Suggested pad layouts are available on the referenced drawings on the Tyco Electronics website Position 1 L .0125 [.318] Offset .058 [1.47] 2 Plcs. .038 [.97] Typ. .040 [1.02] Typ. .126 [3.20] .025 [.64] Pitch A B .223 [5.66] .253 [6.43] .072 [1.83] 2 Plcs. Receptacle Assembly Drawing Number 1589486 Receptacle Assembly, Vertical Surface Mount, Two Row Dualobe, Metal w/ Integrated Standoffs 1589486 Size 9 15 25 37 51 65 Dimensions A 0.050 [1.27] 0.875 [2.23] 0.150 [3.81] 0.225 [5.72] 0.313 [7.95] 0.400 [10.16] B 0.229 0.304 0.429 0.579 0.754 0.929 [5.82] [7.72] [10.90] [14.71] [19.15] [23.60] C 0.3085 0.3835 0.5085 0.6585 0.8335 1.0085 [7.84] [9.74] [12.92] [16.73] [21.17] [25.62] L .100 [2.54] .175 [4.45] .300 [8.89] .450 [11.43] .625 [15.88] .800 [20.32] 156 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 DUALOBE Rectangular Connectors Thru-Hole Connectors -- Horizontal, 1 Row to 2 Row, .050 Spacing DUALOBE Rectangular Connectors .050 Typ. [1.27] .140 [3.56] .273 [6.93] Typ. .223 [5.66] .112 [2.84] 2 Plcs. B Receptacle B 5 Position 1 L Product Facts n n n n .038 [.97] Typ. Plastic or Metal Shell Standard Sizes: 5, 9, 15, 25, 37, and 51 Contact Tyco Electronics for custom configurations Suggested thru-hole layouts are available on the referenced drawings on the Tyco Electronics website .043 [1.09] 2 Plcs. .086 [2.18] .090 [2.29] Typ. C Receptacle Assembly Drawing Number 1589469 Receptacle Assembly, Horizontal Mount, Through Hole, 1 Row to 2 Row, .050 Spacing, Plastic or Metal .075 [1.91] 2 Plcs. 1589469 .140 [3.56] .205 [5.21] .050 [1.27] Typ. .255 [6.48] Typ. .117 [2.97] B Position 1 C .038 [.97] Typ. .043 [1.09] 2 Plcs. .086 [2.18] .090 [2.29] Typ. L Plug Assembly Drawing Number 1589471 Plug Assembly, Horizontal Mount, Through Hole, 1 Row to 2 Row, .050 Spacing, Plastic or Metal Size 5 9 15 25 37 51 0.233 0.333 0.483 0.733 1.033 1.383 B [5.92] [8.46] [12.27] [18.62] [26.24] [35.13] Dimensions C 0.3085 [7.84] 0.4085 [10.38] 0.5585 [14.19] 0.8085 [20.54] 1.1085 [28.16] 1.4585 [37.05] 1589471 L 0.100 [2.54] 0.200 [5.08] 0.350 [8.89] 0.600 [15.24] 0.900 [22.86] 1.250 [31.75] 157 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 DUALOBE Rectangular Connectors Thru-Hole Connectors -- Horizontal, 2 Row to 4 Row, .050 Spacing .050 Typ. [1.27] .240 [6.10] .112 [2.84] 2 Plcs. .223 [5.66] .273 [6.93] Typ. Receptacle B Position 1 Product Facts n n n n Plastic or Metal Shell Standard Sizes: 9, 15, 25, 37, 51 and 65 Contact Tyco Electronics for custom configurations Suggested thru-hole layouts are available on the referenced drawings on the Tyco Electronics website B .126 [3.20] .038 [.97] Typ. .040 [1.02] Typ. .058 [1.47] 2 Plcs. L Position `Size' .090 [2.29] Typ. C Receptacle Assembly Drawing Number 1589487 Assembly, Horizontal Mount, Receptacle Through Hole, 2 Row to 4 Row, .050 Spacing, Plastic or Metal 1589487 .075 [1.91] 2 Plcs. .240 [6.10] .205 [5.21] .117 [2.97] .050 [1.27] Typ. .255 Typ. [6.48] B Position 1 C .126 [3.20] .058 [1.47] 2 Plcs. .038 [.97] Typ. .040 Typ. [1.02] .090 Typ. [2.29] Position `Size' L Plug Assembly Drawing Number 1589481 Size 9 15 25 37 51 65 0.229 0.304 0.429 0.579 0.754 0.929 B [5.82] [7.72] [10.90] [14.71] [19.15] [23.60] Dimensions C 0.3085 [7.84] 0.3835 [9.74] 0.5085 [12.92] 0.6585 [16.73] 0.8335 [21.17] 1.0085 [25.62] L 0.100 [2.54] 0.175 [4.45] 0.300 [7.62] 0.450 [11.43] 0.625 [15.88] 0.800 [20.32] 158 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 DUALOBE Rectangular Connectors Thru-Hole Connectors -- Vertical Mount, 1 Row to 2 Row Connectors, .050 Spacing DUALOBE Rectangular Connectors C L Position 1 .038 [.97] Typ. .086 [2.18] .043 [1.09] 2 Plcs. B Receptacle Product Facts n n n n Plastic or Metal Shell Standard Sizes: 5, 9, 15, 25, 37 and 51 Contact Tyco Electronics for custom configurations Suggested thru-hole layouts are available on the referenced drawings on the Tyco Electronics website 5 .140 [3.56] .117 [2.97] .205 [5.21] .296 [7.52] .050 [1.27] Typ. .020 Typ. [0.51] .090 Lead Length Typ. [2.29] Plug Assembly Drawing Number 1589461 L Position 1 .038 [.97] Typ. Plug Assembly, Vertical Mount, Through Hole, 1 to 2 Row, .050 Spacing, Plastic or Metal 1589461 .086 [2.18] .043 [1.09] 2 Plcs. B C B .140 [3.56] .112 2 Plcs. [2.84] .223 [5.66] .314 [7.98] .050 [1.27] Typ. .020 Typ. [0.51] .090 [2.29] Lead Length Typ. Receptacle Assembly Drawing Number 1589470 Receptacle Assembly, Vertical Mount, Through Hole, 1 Row to 2 Row, Dimensions .050 Spacing, Plastic or Metal Size 5 9 15 25 37 51 0.233 0.333 0.483 0.733 1.033 1.383 B [5.92] [8.46] [12.27] [18.62] [26.24] [35.13] C 0.3085 [7.84] 0.4085 [10.38] 0.5585 [14.19] 0.8085 [20.54] 1.1085 [28.16] 1.4585 [37.05] 1589470 L 0.100 [2.54] 0.200 [5.08] 0.350 [8.89] 0.600 [15.24] 0.900 [22.86] 1.250 [31.75] 159 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 DUALOBE Rectangular Connectors Thru-Hole Connectors -- Vertical Mount, 2 Row to 4 Row Connectors, .050 Spacing Position 1 C .038 Typ. [.97] .040 [1.02] Typ. .058 [1.47] 2 Plcs. .126 [3.20] L Receptacle Product Facts n n n n .24 [6.10] B .117 [2.97] .205 [5.21] Plastic or Metal Shell Standard Sizes: 9, 15, 25, 37, 51 and 65 Contact Tyco Electronics for custom configurations Suggested thru-hole layouts are available on the referenced drawings on the Tyco Electronics website .286 [7.26] .090 Lead Length Typ. [2.29] .020 [0.51] Typ. .050 [1.27] Typ. Plug Assembly Drawing Number 1589482 Plug Assembly, Vertical Mount, Through Hole, 2 to 4 Row, .050 Spacing, Plastic or Metal C .038 [.97] Typ. .040 [1.02] Typ. .126 [3.20] 1589482 .058 [1.47] 2 Plcs. L Position `Size' B B .223 [5.66] .24 [6.10] .304 [7.72] .090 Lead Length Typ. [2.29] .050 [1.27] Typ. .020 [0.51] Typ. Receptacle Assembly Drawing Number 1589488 Receptacle Assembly, Vertical Mount, Size 9 15 25 37 51 65 0.229 0.304 0.429 0.579 0.754 0.929 B [5.82] [7.72] [10.90] [14.71] [19.15] [23.60] Dimensions Through Hole, 2 to 4 Row, .050 Spacing, Plastic or Metal C 1589488 0.3085 [7.84] 0.100 0.3835 [9.74] 0.175 0.5085 [12.92] 0.300 0.6585 [16.73] 0.450 0.8335 [21.17] 0.625 1.0085 [25.62] 0.800 L [2.54] [4.45] [7.62] [11.43] [15.88] [20.32] 160 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 DUALOBE Rectangular Connectors Part Numbering Guideline for Surface Mount and Thru-Hole Connectors DUALOBE Rectangular Connectors DUALOBE Connectors - Surface Mount and Thru Hole Terminations S X X XXX XX(X) X X Class Threads/Jackscrew S Dualobe Threads (Receptacles Only) Jackscrews (Plugs Only) Rows N Thread for 1.0 mm Jackscrews M 1.0 mm Non Captive Jackscrews S 1 Row Q Thread for 1.2 mm Jackscrews N 1.0 mm Captive Jackscrews Q 1.2 mm Captive Jackscrews T 2 Row Mounting Hardware Type L LCP (Plastic) M Metal (Al, Ni Plate) Positions 005 5 Position (single row only) 009 9 Position A 1.2 mm x .160" K 1.0 mm x .200" w/ 4 standoffs C 1.0 mm x .200" w/ 2 standoffs L 1.2 mm x .200" w/ 2 standoffs D 1.2 mm x .160" w/ 2 standoffs P 1.2 mm x .200" w/ 4 standoffs H 1.0 mm x .160" S 1.0 mm x .160" w/ 2 standoffs I 1.2 mm x .200" 015 15 Position Configurations 025 25 Position B2 Plug, Horizontal SMT 037 37 Position B4 Plug, Vertical SMT 051 51 Position B42 Plug, Vertical SMT, .020" Extended Leads 065 65 Position (two row only) B44 Plug, Vertical SMT, .040" Extended Leads 5 B43 Plug, Vertical SMT, .020" Extended Leads, 2 side exit (single row only) B45 Plug, Vertical SMT, .040" Extended Leads, 2 side exit (single row only) L2 Receptacle, Horizontal SMT L4 Receptacle, Vertical SMT L42 Receptacle, Vertical SMT, .020" Extended Leads L44 Receptacle, Vertical SMT, .040" Extended Leads L43 Receptacle, Vertical SMT, .020" Extended Leads, 2 side exit (single row only) L45 Receptacle, Vertical SMT, .040" Extended Leads, 2 side exit (single row only) L8 Receptacle, Vertical SMT, w/ integrated standoffs (metal shell only) L82 Receptacle, Vertical SMT, w/ integrated standoffs, .020" Extended Leads (metal shell only) L84 Receptacle, Vertical SMT, w/ integrated standoffs, .040" Extended Leads (metal shell only) L83 Receptacle, Vertical SMT, w/ integrated standoffs, .020" Extended Leads (single row and metal shell only) L85 Receptacle, Vertical SMT, w/ integrated standoffs, .040" Extended Leads (single row and metal shell only) C5 Plug, Vertical Mount, Thru Hole C6 Plug, Horizontal Mount, Thru Hole M5 Receptacle, Vertical Mount, Thru Hole M6 Receptacle, Horizontal Mount, Thru Hole 161 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 DUALOBE Rectangular Connectors Flex Termination "Duckbill" Connectors -- Two Row Product Facts n n n .075 [1.91] 2 Plcs. Plastic or Metal Shell Standard Sizes: 9, 15, 25, 37, 51 and 65 Contact Tyco Electronics for custom configurations .010 Typ. [0.25] .100 [2.54] Typ. .086 [2.18] Typ. .117 [2.97] .205 [5.21] Jackscrews Omitted for Clarity B A Max. Position 1 Position `Size' Position 1 C .058 2 Plcs. [1.47] .038 Typ. [.97] .040 [1.02] Typ. .086 [2.18] Typ. .050 [1.27] Typ. .025 [0.64] Typ. E .126 [3.20] .075 [1.91] 2 Plcs. .100 [2.54] Typ. Flex Top View Size 15 shown for reference Position `Size' L .017 [0.43] F Plug Assembly Drawing Number 1589066 .010 [0.25] Typ. .086 [2.18] Typ. .117 [2.97] .205 [5.21] B A Max. Position 1 Position `Size' Position 1 .058 [1.47] 2 Plcs. C .038 [.97] Typ. .040 [1.02] Typ. .086 [2.18] Typ. .050 [1.27] Typ. .126 [3.20] L Plug Assembly, Two Ro Duckbill Lead Plastic or Me .017 [0.43] .025 [0.64] Typ. E D Flex Top View Size 15 shown for reference Position `Size' 1589066 Flex Bottom View Typical Flex Pad Layout Size 9 15 25 37 51 65 A 0.150 [3.81] 0.225 [5.72] 0.350 [8.89] 0.500 [12.7] 0.675 [17.1] 0.850 [21.6] B 0.229 [5.82] 0.304 [7.72] 0.429 [10.90] 0.579 [14.71] 0.754 [19.15] 0.929 [23.60] Dimensions C 0.3085 [ 7.84] 0.3835 [ 9.74] 0.5085 [12.92] 0.6585 [16.73] 0.8335 [21.17] 1.0085 [25.62] D 0.0500 [1.27] 0.0875 [2.22] 0.1500 [3.81] 0.2250 [5.72] 0.3125 [7.94] 0.4000 [10.2] E 0.0375 [0.95] 0.0750 [1.90] 0.1375 [3.49] 0.2125 [5.40] 0.3000 [7.62] 0.3875 [9.84] L 0.100 [ 2.54] 0.175 [ 4.45] 0.300 [ 7.62] 0.450 [11.43] 0.625 [15.88] 0.800 [20.32] Plug Assembly, Two Row Dualobe, Duckbill Leads, Plastic or Metal 162 1589066 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 DUALOBE Rectangular Connectors Flex Termination "Duckbill" Connectors -- Two Row (Continued) DUALOBE Rectangular Connectors .010 [0.25] Typ. .100 [2.54] Typ. .086 [2.18] Typ. .112 [2.84] 2 Plcs. .223 [5.66] 5 B .100 Typ. [2.54] Position 1 .038 Typ. [.97] .040 [1.02] Typ. B .010 .058 Typ. 2 Plcs. [0.25] [1.47] .126 [3.20] A Max. .086 [2.18] Typ. .086 [2.18] Typ. .050 [1.27] Typ. .017 [0.43] .112 [2.84] 2 Plcs. .223 [5.66] Position 1 L Position `Size' .025 [0.64] Typ. E C Flex Top View Size 15 shown for reference Receptacle Assembly Drawing Number 1589067 B .058 [1.47] 2 Plcs. n `Size' A Max. Position 1 .038 [.97] Typ. .040 [1.02] Typ. B Position 1 Position `Size' .086 [2.18] Typ. .050 Typ. [1.27] .017 [0.43] .025 [0.64] Typ. L D E C Flex Top View Size 15 shown for reference Flex Bottom View Typical Flex Pad Layout Part Numbering Guideline for Flex Termination "Duckbill" Connectors DUALOBE Connectors - "Duckbill" Termination S T X XXX 11378 XX Class Receptacle Assem Duc Plas X Threads/Jackscrew S Dualobe Threads (Receptacles Only) Jackscrews (Plugs Only) Rows N Thread for 1.0 mm Jackscrews M 1.0 mm Non Captive Jackscrews T 2 Row Q Thread for 1.2 mm Jackscrews N 1.0 mm Captive Jackscrews Q 1.2 mm Captive Jackscrews Configuration Type L LCP (Plastic) M Metal (Al, Ni Plate) PC Plug SC Receptacle Positions 009 9 Position 015 15 Position Receptacle Assembly, Two Row Dualobe, Duckbill Leads, Plastic or Metal "Duckbill" Termination 1589067 025 25 Position Termination Code 037 37 Position 11378 051 51 Position 065 65 Position 163 Catalog 1308638 Revised 7-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 DUALOBE Rectangular Connectors Solder Cup Connectors -- Single Row Product Facts n n n L .025 [.64] Pitch Type Plastic or Metal Shell Standard Sizes: 5, 9, 15, 25, 37 and 51 Contact Tyco Electronics for custom configurations .038 [.97] Typ. Position 1 .075 [1.91] 2 Plcs. .055 Typ. [1.40] .205 [5.21] .117 [2.97] Position 1 B .086 [2.18] L .043 [1.09] 2 Plcs. .025 [.64] Pitch Type .038 Typ. [.97] C Plug Assembly Drawing Number 1589051 Position 1 Plug Assembly, Single Row Dualobe, .075 Solder Cup Termination, [1.91] Typ. Plastic or Metal 1589051 .112 2 Plcs. [2.84] .223 [5.66] B B Position 1 .086 [2.18] .043 [1.09] 2 Plcs. C Receptacle Assembly Drawing Number 1589052 Receptacle Assembly, Single Row Dualo Solder Cup Termination, Plastic or Metal 1589052 Size 5 9 15 25 37 51 0.233 0.333 0.483 0.733 1.033 1.383 B [5.92] [8.46] [12.27] [18.62] [26.24] [35.13] Dimensions C 0.3085 [7.84] 0.4085 [10.38] 0.5585 [14.19] 0.8085 [20.54] 1.1085 [28.16] 1.4585 [37.05] L 0.100 [2.54] 0.200 [5.08] 0.350 [8.89] 0.600 [15.24] 0.900 [22.86] 1.250 [31.75] 164 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 DUALOBE Rectangular Connectors Solder Cup Connectors -- Two Row DUALOBE Rectangular Connectors L .025 Pitch Type [.64] .038 Typ. [.97] .040 Typ. [1.02] .0125 [0.32] Offset .075 [1.91] 2 Plcs. Plug .205 [5.21] .117 [2.97] B Position 1 Receptacle 5 .055 Typ. [1.40] .126 [3.20] .058 [1.47] 2 Plcs. L C .025 [.64] Pitch Type .040 [1.02] Typ. Position `Size' Product Facts n n n Plastic or Metal Shell Standard Sizes: 9, 15, 25, 37, 51 and 65 Contact Tyco Electronics for custom configurations Plug Assembly Drawing Number 1589053 .0125 .038 Plug Assembly,[.32] TwoOffset Row Dualobe, [.97] Typ. Solder Cup Termination, .075 Plastic or Metal [1.91] Typ. 1589053 .112 [2.84] 2 Plcs. .223 [5.66] B B Position 1 .126 [3.20] .058 [1.47] 2 Plcs. Position `Size' C Receptacle Assembly Drawing Number 1589054 Receptacle Assembly, Two Row Dua Solder Cup Termination, Plastic or Metal Size 9 15 25 37 51 65 0.229 0.304 0.429 0.579 0.754 0.929 B [5.82] [7.72] [10.90] [14.71] [19.15] [23.60] Dimensions C 0.3085 [7.84] 0.3835 [9.74] 0.5085 [12.92] 0.6585 [16.73] 0.8335 [21.17] 1.0085 [25.62] L 0.100 [2.54] 0.175 [4.45] 0.300 [7.62] 0.450 [11.43] 0.625 [15.88] 0.800 [20.32] 1589054 165 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 DUALOBE Rectangular Connectors Part Numbering Guideline for Solder Cup Connectors DUALOBE Connectors - Solder Cup Termination S X X XXX 11500 XX Class X Threads/Jackscrew S Dualobe Threads (Receptacles Only) Jackscrews (Plugs Only) Rows N Thread for 1.0 mm Jackscrews M 1.0 mm Non Captive Jackscrews S 1 Row Q Thread for 1.2 mm Jackscrews N 1.0 mm Captive Jackscrews Q 1.2 mm Captive Jackscrews T 2 Row Configuration Type L LCP (Plastic) M Metal (Al, Ni Plate) PC Plug SC Receptacle Positions 005 5 Position (single row only) 009 9 Position 015 15 Position Termination Code 025 25 Position 11500 Solder Cup Termination 037 37 Position 051 51 Position 065 65 Position (two row only) 166 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 DUALOBE Rectangular Connectors Panel Mount Connectors -- Single Row, Flying Leads DUALOBE Rectangular Connectors Product Facts n n n n Metal Shell Standard Sizes: 5, 9, 15, 25, 37 and 51 Factory wired to your specifications Contact Tyco Electronics for custom configurations .050 [1.27] 5 .062 [1.57] .223 [5.66] Position 1 A .038 Typ. [.97] B .043 [1.09] 4 Plcs. .166 [4.22] .086 [2.18] 2 Plcs. .083 [2.11] 2 Plcs. L C D Receptacle Assembly Drawing Number 1589851 Receptacle Assembly, Panel Mount, Single Row Dualobe, Flying Leads, Metal Shell 1589851 Size 5 9 15 25 37 51 0.470 0.570 0.720 0.970 1.270 1.620 A [11.94] [14.48] [18.29] [24.64] [32.26] [14.15] 0.233 0.333 0.483 0.733 1.033 1.383 B [5.92] [8.46] [12.27] [18.62] [26.24] [35.13] Dimensions C 0.310 [7.87] 0.410 [10.41] 0.560 [14.22] 0.810 [20.57] 1.110 [28.19] 1.460 [37.08] 0.620 0.720 0.870 1.120 1.420 1.770 D [15.75] [18.29] [22.10] [28.45] [36.07] [44.96] 0.100 0.200 0.350 0.600 0.900 1.250 L [2.54] [5.08] [8.89] [15.24] [22.86] [31.75] 167 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 DUALOBE Rectangular Connectors Panel Mount Connectors -- Two Row, Flying Leads .050 [1.27] .223 [5.66] Receptacle Product Facts n n n .062 [1.57] Position 1 A Metal Shell Standard Sizes: 9, 15, 25, 37, 51 and 65 Contact Tyco Electronics for custom configurations .038 [.97] Typ. .040 Typ. [1.02] B .058 [1.47] 2 Plcs. .206 [5.23] .063 2 Plcs. [1.60] L C Position `Size' D Receptacle Assembly Drawing Number 1589050 Receptacle Assembly, Panel Mount, Two Row Dualobe, Flying Leads, Metal Shell 1589050 Size 9 15 25 37 51 65 0.470 0.545 0.670 0.820 0.995 1.170 A [11.94] [13.84] [17.02] [20.83] [25.27] [20.72] 0.229 0.304 0.429 0.579 0.754 0.929 B [5.82] [7.72] [10.90] [14.71] [19.15] [23.60] Dimensions C 0.310 [7.87] 0.385 [9.78] 0.510 [12.95] 0.660 [16.76] 0.835 [21.21] 1.010 [25.65] 0.620 0.695 0.820 0.970 1.145 1.320 D [15.75] [17.65] [20.83] [24.64] [29.08] [33.53] 0.100 0.175 0.300 0.450 0.625 0.800 L [2.54] [4.45] [7.62] [11.43] [15.88] [20.32] 168 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 DUALOBE Rectangular Connectors Part Numbering Guideline for Panel Mount Connectors DUALOBE Rectangular Connectors DUALOBE Connectors - Panel Mount P X M XXX SC XX X XXX X Class Jackscrew Threads P Panel Mount Threads Rows N Thread for 1.0 mm Jackscrews S 1 Row Q Thread for 1.2 mm Jackscrews T 2 Row Conductor Length Type M Metal (Al, Ni Plate) Positions 005 5 Position (single row only) 009 9 Position XXX Three numbers only, length is in inches ( i.e. 012 = twelve inches) CXX A "C" follwed by two numbers, length is in centimeters ( i.e. C06 = 6 centimeters) MXX An "M" followed by two numbers, length is in meters ( i.e. M02 = 2 meters) Conductor Type 015 15 Position DX White Teflon DM Color Coded Teflon per MIL-STD-681 025 25 Position DY White PTFE per M16878/6 DT White Tefzel per M22759/33 037 37 Position DC Color Coded Teflon GX Teflon Ribbon Cable 051 51 Position 065 65 Position (two row only) Conductor Size/Strands 0 28 AWG Solid Configuration 1 30 AWG Solid SC Receptacle 2 30 AWG 7 Strand 3 32 AWG 7 Strand 4 34 AWG 7 Strand 169 169 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 5 DUALOBE Rectangular Connectors Part Number Index Cross Reference Nanonics Part Number Tyco Part Number Nanonics Part Number SSL005PC0DC006N 0-1589455-2 SSL005PC0DC012N SSL005PC0DX012M SSL005PC2DC002N SSL005PC2DC004 SSL005PC2DC006 SSL005PC2DC006N SSL005PC2DC012N SSL005PC2DX006N SSL005SC0DC006N SSL005SC2DC006N 0-1589455-3 7-1589456-3 2-1589827-7 0-1589455-4 0-1589455-5 0-1589455-6 6-1589456-4 0-1589455-7 0-1589457-1 0-1589457-2 SSL005SC2DC012N SSL005SC3DM024N SSL009PC0DC006N 7-1589457-6 0-1589457-3 0-1589455-8 SSL015SC2DC005N SSL015SC2DC006N SSL015SC2DC012N SSL015SC2DC024N SSL015SC2DC036N SSL025PC0DC012M SSL025PC2DC006 SSL025PC2DC006N SSL025PC2DC012 SSL025PC2DC018N SSL025PC2DC020N SSL025PC2DC024M SSL025PC2DC024N SSL025PC2DM018M SSL025PC2DX012Q SSL009PC0DMM03N SSL009PC0DX012M SSL009PC2DC001N SSL009PC2DC003 SSL009PC2DC006N SSL009PC2DC009N SSL009PC2DC012 SSL009PC2DC012M SSL009PC2DC012N SSL009PC2DC012Q SSL009PC2DC018N SSL009PC2DC024N SSL009PC2DCC03N SSL009PC2DCC10N SSL009PC2DM010N SSL009PC2DM018M SSL009PC2DMC60Q SSL009SC0DMM03N SSL009SC2DC003 SSL009SC2DC006N SSL009SC2DC012 SSL009SC2DC012Q SSL009SC2DM006N SSL009SC2GX006 SSL015PC0DC012N SSL015PC0DMM03N SSL015PC0DX012M SSL015PC2DC003N SSL015PC2DC006N SSL015PC2DC008N SSL015PC2DC012 SSL015PC2DC012M SSL015PC2DC012N SSL015PC2DC016N SSL015PC2DC018 SSL015PC2DC018N SSL015PC2DC024 SSL015PC2DC024M SSL015PC2DC024N SSL015PC2DC036N SSL015PC2DM018M SSL015SC0DMM03N 0-1589455-9 7-1589456-4 1-1589455-0 1-1589455-1 1-1589455-2 1-1589455-3 1-1589455-4 1-1589455-5 1-1589455-6 9-1589456-2 1-1589455-7 7-1589456-9 1-1589455-8 1-1589455-9 2-1589455-0 2-1589455-1 2-1589455-2 0-1589457-4 0-1589457-5 0-1589457-6 0-1589457-7 9-1589457-2 0-1589457-8 1-1589457-0 0-1589827-6 2-1589455-3 7-1589456-5 0-1589827-3 2-1589455-4 2-1589455-5 2-1589455-6 0-1589827-2 2-1589455-7 0-1589827-8 2-1589455-8 1-1589827-1 2-1589455-9 7-1589456-2 0-1589827-9 0-1589827-5 3-1589455-0 1-1589457-1 SSL025PC2GX006N SSL025SC0DC012N SSL025SC2DC006 SSL025SC2DC006N SSL025SC2DC012N SSL025SC2DC036N SSL037PC2DC012N SSL037PC2DC018N SSL037PC2DC024N SSL037PC2DC096N SSL037SC2DC012N SSL051PC0DX012M SSL051PC2DC012N SSM005PC0DC024N SSM005PC0DC036N SSM005PC0DX024N SSM005PC2DC006 SSM005PC2DC006N SSM005PC2DC012M SSM005PC2DC012N SSM005PC2DC012Q SSM005PC2DC018N SSM005PC2DC036N SSM005PC2DC040N SSM005PC2DCC20N SSM005PC2DT012N SSM005PC2DX012N SSM005PC2DX018N SSM005PC2DX024N SSM005PC4DX012N SSM005PC4DXM01 SSM005SC0DC024N SSM005SC0DC036N SSM005SC0DX024N SSM005SC2DC006N SSM005SC2DC012N SSM005SC2DC012Q SSM005SC2DC018N SSM005SC2DC040N SSM005SC2DT012N SSM005SC2DX024HN SSM005SC4DX012N Wired Connectors Tyco Part Number 9-1589457-6 1-1589457-2 1-1589457-3 1-1589457-4 8-1589457-9 8-1589456-5 3-1589455-1 3-1589455-2 3-1589455-3 9-1589456-6 3-1589455-4 0-1589827-1 7-1589456-8 3-1589455-5 3-1589455-6 3-1589455-7 8-1589457-5 1-1589457-5 1-1589457-6 1-1589457-7 8-1589457-8 3-1589455-8 8-1589456-0 3-1589455-9 4-1589455-0 1-1589457-8 7-1589456-6 4-1589455-1 2-1589827-2 7-1589456-0 8-1589456-9 4-1589455-2 4-1589455-3 7-1589456-1 4-1589455-4 6-1589456-3 4-1589455-5 4-1589455-6 4-1589455-7 9-1589456-7 1-1589827-6 4-1589455-8 4-1589455-9 5-1589455-0 5-1589455-1 5-1589455-2 0-1589901-5 8-1589457-0 9-1589457-0 1-1589457-9 2-1589457-0 7-1589457-4 2-1589457-1 2-1589457-2 9-1589457-7 2-1589457-3 2-1589457-4 Nanonics Part Number SSM009PC0DC012N SSM009PC0DC024N SSM009PC0DM024N SSM009PC0DX012N SSM009PC2DC003 SSM009PC2DC003N SSM009PC2DC006 SSM009PC2DC006N SSM009PC2DC010N SSM009PC2DC012 SSM009PC2DC012M SSM009PC2DC012N SSM009PC2DC018 SSM009PC2DC018N SSM009PC2DC024 SSM009PC2DC024N SSM009PC2DC036N SSM009PC2DC060N SSM009PC2DC084N SSM009PC2DCC10N SSM009PC2DCM01N SSM009PC2DCM02N SSM009PC2DM010N SSM009PC2DM018N SSM009PC2DM024 SSM009PC2DM024N SSM009PC2DT012N SSM009PC2DT024N SSM009PC2DX005N SSM009PC2DX006N SSM009PC2DX010N SSM009PC2DX012N SSM009PC2DX018N SSM009PC2DX024N SSM009PC2DY006N SSM009PC3DC018N SSM009SC0DC024N SSM009SC1DC002 SSM009SC2DC006HN SSM009SC2DC006N SSM009SC2DC012N SSM009SC2DC018N SSM009SC2DC024N SSM009SC2DC036N SSM009SC2DC060N SSM009SC2DC084N SSM009SC2DM006N SSM009SC2DM012 SSM009SC2DT012N SSM009SC2DX012N SSM009SC2DX018N SSM009SC2DX024HN SSM009SC2DX036HN SSM015PC0DC012N SSM015PC0DC018N SSM015PC0DC024N SSM015PC0DMM02N Tyco Part Number 0-1589827-7 5-1589455-3 5-1589455-4 5-1589455-5 5-1589455-6 5-1589455-7 5-1589455-8 5-1589455-9 6-1589455-0 6-1589455-1 6-1589455-2 6-1589455-3 6-1589455-4 6-1589455-5 6-1589455-6 6-1589455-7 6-1589455-8 6-1589455-9 8-1589456-8 7-1589455-0 7-1589455-1 8-1589456-7 7-1589455-2 7-1589455-3 7-1589455-4 6-1589456-5 1-1589827-7 1-1589827-0 7-1589455-5 7-1589455-6 7-1589455-7 7-1589455-8 7-1589455-9 8-1589455-0 8-1589455-1 8-1589455-2 0-1589901-6 2-1589457-5 2-1589457-6 2-1589457-7 2-1589457-9 3-1589457-0 3-1589457-1 3-1589457-2 8-1589457-3 8-1589457-7 3-1589457-4 3-1589457-5 9-1589457-8 3-1589457-6 3-1589457-7 3-1589457-8 3-1589457-9 8-1589455-3 8-1589455-4 2-1589827-3 8-1589455-5 Nanonics Part Number SSM015PC2DC003N SSM015PC2DC006 SSM015PC2DC006N SSM015PC2DC008N SSM015PC2DC012 SSM015PC2DC012M SSM015PC2DC012N SSM015PC2DC018 SSM015PC2DC018N SSM015PC2DC024 SSM015PC2DC024N SSM015PC2DC036N SSM015PC2DC048N SSM015PC2DC060N SSM015PC2DM012N SSM015PC2DM024N SSM015PC2DMC20N SSM015PC2DMC30N SSM015PC2DMM02N SSM015PC2DT012N SSM015PC2DX006N SSM015PC2DX006Q SSM015PC2DX008 SSM015PC2DX012N SSM015PC2DX024N SSM015PC2DY003N SSM015PC2DY006N SSM015PC2DY012N SSM015PC2GX018N SSM015PC4DX030N SSM015SC0DC012N SSM015SC0DC024N SSM015SC2DC003N SSM015SC2DC006N SSM015SC2DC012N SSM015SC2DC018 SSM015SC2DC018N SSM015SC2DC024N SSM015SC2DC036N SSM015SC2DC048N SSM015SC2DM024N SSM015SC2DT012N SSM015SC2DX006N SSM015SC2DX012HN SSM015SC2DX018N SSM015SC2DX024HN SSM015SC2DY012N SSM015SC2DY018N SSM015SC4DX005N SSM025PC0DC024N SSM025PC0DC036N SSM025PC2DC003N SSM025PC2DC006Q SSM025PC2DC010N SSM025PC2DC012 SSM025PC2DC012N SSM025PC2DC012Q Tyco Part Number 8-1589455-6 8-1589455-7 8-1589455-8 8-1589455-9 9-1589455-0 6-1589456-6 9-1589455-1 9-1589455-2 9-1589455-3 2-1589827-8 9-1589455-4 9-1589455-5 9-1589455-6 9-1589455-7 9-1589456-4 9-1589455-8 9-1589455-9 3-1589827-0 0-1589456-1 0-1589456-2 0-1589456-3 0-1589456-4 0-1589456-5 0-1589456-6 0-1589456-7 0-1589456-8 0-1589456-9 1-1589456-0 1-1589456-1 1-1589456-2 4-1589457-0 0-1589901-7 4-1589457-1 4-1589457-2 4-1589457-3 4-1589457-4 9-1589457-4 9-1589457-3 4-1589457-5 7-1589457-5 7-1589457-7 9-1589457-9 4-1589457-8 4-1589457-9 5-1589457-0 5-1589457-2 5-1589457-3 5-1589457-4 5-1589457-5 2-1589827-4 6-1589456-9 1-1589456-4 1-1589456-5 1-1589456-6 1-1589456-7 1-1589456-8 8-1589456-1 170 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 DUALOBE Rectangular Connectors Part Number Index Cross Reference (Continued) Tyco Part Number Nanonics Part Number Tyco Part Number Nanonics Part Number Tyco Part Number Nanonics Part Number Tyco Part Number SSM025PC2DC018 SSM025PC2DC018N SSM025PC2DC024N 1-1589456-9 2-1589456-0 9-1589456-1 SSM037SC2DC024N SSM037SC2DT012N SSM037SC2DTC30N 1-1589901-1 0-1589901-2 9-1589457-5 STL009PC3DX030N STL009SC0DC006N STL009SC0DC012N 2-1589472-1 3-1589777-8 8-1589477-3 STL025PC2DC018Q STL025PC2DC020N STL025PC2DC030N 7-1589788-4 4-1589472-8 4-1589472-9 SSM025PC2DC025N SSM025PC2DC030N SSM025PC2DC036N SSM025PC2DCC30N SSM025PC2DCC50N SSM025PC2DM018Q SSM025PC2DM024N SSM025PC2DT012N SSM025PC2DX006N 2-1589456-1 2-1589456-2 2-1589456-3 2-1589456-4 1-1589827-5 9-1589456-9 8-1589456-3 1-1589827-8 2-1589456-5 SSM051PC0DC024N SSM051PC2DC006 SSM051PC2DC006N SSM051PC2DC012N SSM051PC2DC018 SSM051PC2DC024 SSM051PC2DC024N SSM051PC2DC030N SSM051PC2DCC06Q 2-1589827-6 4-1589456-5 4-1589456-6 4-1589456-7 4-1589456-8 4-1589456-9 5-1589456-0 5-1589456-1 5-1589456-2 STL009SC0DC030N STL009SC2DC012 STL009SC2DC012N STL009SC2DC018N STL009SC2DC036N STL009SC2DM036N STL009SC3DX024N STL015PC0DC006N STL015PC0DC012Q 3-1589777-9 0-1589476-6 0-1589476-7 8-1589477-4 0-1589476-8 2-1589777-7 0-1589476-9 2-1589472-2 2-1589472-3 STL025PC2DM010N STL025PC2DT024N STL025PC2DY006N STL025PC2GX036 STL025PC3DX006N STL025PC3DX030N STL025PC4DX030N STL025SC2DC001N STL025SC2DC006N 5-1589472-0 6-1589475-2 9-1589475-5 4-1589788-7 5-1589472-1 9-1589475-2 5-1589472-2 1-1589476-9 2-1589476-0 SSM025PC2DX012N SSM025PC2DX018N SSM025PC2DX024N 2-1589456-6 2-1589456-7 2-1589456-8 SSM051PC2DCC30N SSM051PC2DM012Q SSM051PC2DM018N 9-1589456-3 5-1589456-3 6-1589456-7 STL015PC0DMM03N STL015PC1DNC50N STL015PC2DC006 2-1589472-4 2-1589472-5 2-1589472-6 STL025SC2DC012N STL025SC2DC030N STL025SC2DC036N 2-1589476-1 2-1589476-2 2-1589476-3 SSM025PC2GX006 SSM025PC2GX018N SSM025PC3DY006N SSM025PC4DX015N SSM025SC0DC024N SSM025SC0DC036N SSM025SC2DC006N SSM025SC2DC012N SSM025SC2DC018 SSM025SC2DC024N SSM025SC2DT012N SSM025SC2DX006N SSM025SC2DX018N SSM025SC2DX024HN SSM025SC2DX024N SSM025SC3DY006N SSM037PC0DC006M SSM037PC0DC009Q SSM037PC0DC024N SSM037PC0DC036N SSM037PC2DC006 SSM037PC2DC006N SSM037PC2DC012 SSM037PC2DC012N SSM037PC2DC012Q SSM037PC2DC015N SSM037PC2DC018 SSM037PC2DC018M SSM037PC2DC018N SSM037PC2DC024N SSM037PC2DCM01N SSM037PC2DM024N SSM037PC2DT012N SSM037PC2DTC30N SSM037PC2DX012Q SSM037PC2DX018N SSM037PC2GXC30N SSM037PC4DX018N SSM037SC0DC024N SSM037SC0DC036N SSM037SC2DC018 SSM037SC2DC018N 2-1589456-9 3-1589456-0 3-1589456-1 7-1589456-7 0-1589901-8 7-1589457-9 SSM051PC2DM024N SSM051PC2DMC10N SSM051PC2DMC30N SSM051PC2DNC06Q SSM051PC2DNC15Q SSM051PC2DT012N SSM051PC2DT018N SSM051PC2DX008 SSM051PC2DX012Q SSM051PC2DXM05Q SSM051PC2DY012N SSM051PC2GX012N SSM051SC0DC024N SSM051SC2DC018 SSM051SC2DC018N SSM051SC2DNC15Q SSM051SC2DT012N SSM051SC2DT018N SSM051SC2DT021 SSM051SC2GX012N STL009PC0DC006N STL009PC0DC036 STL009PC0DC036N STL009PC0DM024N STL009PC1DM024N STL009PC2DC012 STL009PC2DC012M STL009PC2DC012N STL009PC2DC018 STL009PC2DC018M STL009PC2DC018N STL009PC2DC024 STL009PC2DC036N STL009PC2DCM01N STL009PC2DCM02N STL009PC2DM010N STL009PC2DM024N STL009PC2DM030N STL009PC2DM048N STL009PC2DX024N STL009PC2GX010N STL009PC3DX024N 5-1589456-4 5-1589456-5 5-1589456-6 5-1589456-7 5-1589456-8 2-1589827-0 STL015PC2DC008 STL015PC2DC010N STL015PC2DC012 STL015PC2DC012N STL015PC2DC015N STL015PC2DC015Q STL015PC2DC018M STL015PC2DC018N STL015PC2DC030N STL015PC2DC036N STL015PC2DCC10N STL015PC2DM010N STL015PC2DM048N STL015PC2DNC50N STL015PC2DX006N STL015PC2DX010N STL015PC2DX036N STL015PC2DY006N STL015PC2GX040N STL015SC0DMM03N STL015SC2DC005N STL015SC2DC008 STL015SC2DC008N STL015SC2DC012N STL015SC2DC018N STL015SC2DC030N STL015SC2DC036N STL015SC2DX010N STL015SC3DX024N STL025PC0DC006N STL025PC0DC012N STL025PC2DC006 STL025PC2DC006M STL025PC2DC006N STL025PC2DC010N STL025PC2DC012 STL025PC2DC012N STL025PC2DC015N STL025PC2DC015Q STL025PC2DC018 STL025PC2DC018M STL025PC2DC018N 2-1589472-7 2-1589472-8 2-1589472-9 3-1589472-0 3-1589472-1 8-1589475-1 STL025SC3DC004N STL025SC3DX030N STL037PC2DC010N STL037PC2DC012 STL037PC2DC012M STL037PC2DC012N STL037PC2DC012Q STL037PC2DC017N STL037PC2DC018M STL037PC2DC018N STL037PC2DC018Q STL037PC2DC020Q STL037PC2DC024N STL037PC2DC036M STL037PC2DC036N STL037PC2DC040N STL037PC2DCC15N STL037PC2DM010N STL037PC2DM048N STL037PC2DT024N STL037PC2DY006N STL037PC2DY020N STL037PC2GX005N STL037PC3DC001 STL037SC2DC012N STL037SC2DC012Q STL037SC2DC030N STL037SC2DC036N STL037SC2DCC15N STL037SC3DC001N STL037SC3DX024N STL051PC0DXC50N STL051PC2DC003N STL051PC2DC006N STL051PC2DC012 STL051PC2DC012N STL051PC2DC018 STL051PC2DC018N STL051PC2DC018Q STL051PC2DC024N STL051PC2DC036N STL051PC2DC040N 9-1589477-4 0-1589777-5 5-1589472-3 5-1589472-4 5-1589472-5 5-1589472-6 8-1589457-6 5-1589457-6 5-1589457-7 5-1589457-9 0-1589901-1 6-1589457-0 6-1589457-1 6-1589457-3 8-1589457-1 6-1589457-4 1-1589827-2 2-1589827-9 2-1589827-5 6-1589456-8 3-1589456-2 3-1589456-3 3-1589456-4 3-1589456-5 9-1589456-5 3-1589456-6 3-1589456-7 1-1589827-3 3-1589456-8 3-1589456-9 4-1589456-0 8-1589456-4 1-1589827-9 9-1589456-8 4-1589456-2 4-1589456-3 4-1589456-4 8-1589456-6 0-1589901-9 7-1589457-8 6-1589457-5 6-1589457-6 2-1589827-1 5-1589456-9 0-1589827-4 6-1589456-0 6-1589456-1 6-1589456-2 1-1589901-0 6-1589457-7 6-1589457-8 6-1589457-9 0-1589901-3 0-1589901-4 7-1589457-1 7-1589457-3 1-1589788-1 7-1589788-6 7-1589788-5 9-1589475-9 2-1589788-9 1-1589472-1 6-1589788-9 1-1589472-2 1-1589472-3 1-1589472-4 1-1589472-5 3-1589788-7 1-1589472-6 5-1589475-3 8-1589788-4 1-1589472-7 0-1589788-1 0-1589788-2 3-1589475-0 1-1589472-8 1-1589472-9 2-1589472-0 3-1589472-2 3-1589475-9 3-1589472-3 3-1589472-4 3-1589472-5 3-1589472-6 3-1589475-1 3-1589472-7 8-1589475-0 3-1589472-8 3-1589472-9 9-1589475-4 4-1589472-0 1-1589476-0 8-1589477-5 1-1589476-1 1-1589476-2 1-1589476-3 1-1589476-4 1-1589476-5 1-1589476-6 1-1589476-7 1-1589476-8 6-1589475-4 3-1589788-3 4-1589472-1 5-1589475-7 4-1589472-2 4-1589472-3 4-1589472-4 4-1589472-5 4-1589472-6 8-1589475-2 8-1589475-6 7-1589788-3 4-1589472-7 DUALOBE Rectangular Connectors Nanonics Part Number 5 8-1589788-2 5-1589472-7 5-1589472-8 5-1589472-9 2-1589788-4 6-1589472-0 3-1589788-0 6-1589472-1 6-1589472-2 6-1589472-3 6-1589472-4 6-1589472-5 3-1589475-2 6-1589475-1 9-1589475-6 7-1589475-4 6-1589472-6 5-1589788-1 2-1589476-4 2-1589476-5 2-1589476-6 2-1589476-7 2-1589476-8 2-1589777-8 2-1589476-9 6-1589472-7 6-1589472-8 6-1589472-9 7-1589472-0 7-1589472-1 7-1589472-2 3-1589788-8 2-1589788-5 7-1589472-3 7-1589472-4 7-1589472-5 171 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 DUALOBE Rectangular Connectors Part Number Index Cross Reference (Continued) Nanonics Part Number Tyco Part Number Nanonics Part Number Tyco Part Number Nanonics Part Number Tyco Part Number Nanonics Part Number Tyco Part Number STL051PC2DCC35N STL051PC2DM048N STL051PC2DNC50 7-1589472-6 3-1589475-3 7-1589472-7 STM009PC2DC036 STM009PC2DC036M STM009PC2DC036N 1-1589473-0 1-1589473-1 1-1589473-2 STM009SC2DM012Q 2-1589777-0 STM009SC2DM018HN 5-1589476-8 STM009SC2DM036N 5-1589476-9 STM015PC3DM024Q STM015PC3DX024N STM015PC4DX012N 6-1589475-8 7-1589473-1 7-1589473-2 STL051PC2DT024N STL051SC2DC003N STL051SC2DC012N STL051SC2DC018N STL051SC2DC024N STL051SC2DC036N STL051SC2DC048 STL051SC2DX024 STL065PC0DC006N 6-1589475-0 3-1589476-0 3-1589476-1 3-1589476-2 3-1589476-3 0-1589777-1 3-1589476-4 3-1589476-5 6-1589475-5 STM009PC2DC060N STM009PC2DC060Q STM009PC2DCC10Q STM009PC2DCC30N STM009PC2DCC40N STM009PC2DCC46N STM009PC2DCC50N STM009PC2DCC90Q STM009PC2DCM01N 5-1589475-4 1-1589473-3 0-1589788-8 7-1589475-1 1-1589473-4 8-1589788-6 4-1589475-8 1-1589473-5 1-1589473-6 STM009SC2DT012HN STM009SC2DT012N STM009SC2DT030N STM009SC2DX010N STM009SC2DX012HN STM009SC2DX012N STM009SC2DXC15Q STM009SC2DXM01Q STM015PC0DC036N 6-1589476-0 6-1589476-1 6-1589476-2 6-1589476-3 6-1589476-4 6-1589476-5 6-1589476-6 9-1589477-9 5-1589788-4 STM015PC4DX024N STM015SC0DC012DQ STM015SC0DC036N STM015SC0DM036N STM015SC0DXC10N STM015SC0DXC10Q STM015SC2DC003N STM015SC2DC004HN STM015SC2DC006N 8-1589475-7 1-1589777-8 2-1589777-9 2-1589777-1 6-1589476-7 6-1589476-8 7-1589476-1 7-1589476-2 7-1589476-3 STL065PC0DC012N STL065PC0DC036N STL065PC0DC036Q 3-1589788-4 7-1589472-8 1-1589788-7 STM009PC2DCM02N STM009PC2DM012N STM009PC2DM012Q 8-1589788-3 1-1589473-7 1-1589473-8 STM015PC0DCM02Q STM015PC0DM012N STM015PC0DM024N 2-1589473-9 3-1589473-0 1-1589788-3 STM015SC2DC008HN STM015SC2DC008Q STM015SC2DC012HN 7-1589476-4 3-1589777-4 7-1589476-5 STL065PC2DC006 STL065PC2DC006M STL065PC2DC006N STL065PC2DC012N STL065PC2DC018 STL065PC2DC018N STL065PC2DC018Q STL065PC2DC024N STL065PC2DC036N STL065PC2DC040N STL065PC2DC072N STL065PC2DCC10N STL065PC2DM018N STL065PC2DM036N STL065PC2DT024N STL065PC2DTC10N STL065PC2GX036Q STL065PC3DM072N STL065SC2DC006N STL065SC2DC012N STL065SC2DC048N STL065SC2DM036N STL065SC3DM072N STM009PC0DC020N STM009PC0DM024N STM009PC0DXC10N STM009PC2DC003N STM009PC2DC004N STM009PC2DC006 STM009PC2DC006N STM009PC2DC012 STM009PC2DC012M STM009PC2DC012N STM009PC2DC016N STM009PC2DC018N STM009PC2DC019 STM009PC2DC020Q STM009PC2DC024 STM009PC2DC024N STM009PC2DC024Q STM009PC2DC028N STM009PC2DC030N 7-1589472-9 5-1589475-8 8-1589472-0 8-1589472-1 8-1589472-2 8-1589472-3 STM009PC2DM018N STM009PC2DM036N STM009PC2DN036M STM009PC2DT006Q STM009PC2DT012N STM009PC2DT018N STM009PC2DT030N STM009PC2DT036N STM009PC2DTC45N STM009PC2DX006Q STM009PC2DX010N STM009PC2DX012N STM009PC2DX024N STM009PC2DXC15Q STM009PC2DXM01Q STM009PC2DY030N STM009PC2GX006 STM009PC2GX006N STM009PC2GX012N STM009PC3DM024Q STM009SC0DX012N STM009SC2DC003N STM009SC2DC006 STM009SC2DC006HN STM009SC2DC006N STM009SC2DC012HN STM009SC2DC012N STM009SC2DC012Q STM009SC2DC018HM STM009SC2DC018HN STM009SC2DC018N STM009SC2DC024N STM009SC2DC024Q STM009SC2DC036HN STM009SC2DC036N STM009SC2DC048N STM009SC2DC060Q STM009SC2DCC46N STM009SC2DCM01HN STM009SC2DCM01N STM009SC2DCM02N STM009SC2DM012HN 1-1589473-9 2-1589473-0 2-1589473-1 7-1589475-6 7-1589788-1 2-1589473-2 STM015PC2DC003N STM015PC2DC005N STM015PC2DC006N STM015PC2DC012N STM015PC2DC012Q STM015PC2DC016N STM015PC2DC018N STM015PC2DC020Q STM015PC2DC024N STM015PC2DC030N STM015PC2DC036 STM015PC2DC036M STM015PC2DC036N STM015PC2DC048N STM015PC2DC060Q STM015PC2DC120N STM015PC2DCC10Q STM015PC2DCC30N STM015PC2DCC90Q STM015PC2DCM01N STM015PC2DM018N STM015PC2DM020N STM015PC2DM024N STM015PC2DM036N STM015PC2DMM01N STM015PC2DT006Q STM015PC2DT012N STM015PC2DT030N STM015PC2DT036N STM015PC2DTC15N STM015PC2DTC22Q STM015PC2DTC45N STM015PC2DTC95Q STM015PC2DX005Q STM015PC2DX010N STM015PC2DX012N STM015PC2DX024N STM015PC2DX030N STM015PC2DX048N STM015PC2DX072N STM015PC2DXC15Q STM015PC2GX004N 3-1589473-6 3-1589473-7 3-1589473-8 3-1589473-9 4-1589473-0 4-1589473-1 STM015SC2DC012N STM015SC2DC015Q STM015SC2DC016N STM015SC2DC018N STM015SC2DC024N STM015SC2DC036N STM015SC2DC036Q STM015SC2DC060Q STM015SC2DCC30N STM015SC2DCC50N STM015SC2DCM01HN STM015SC2DM006N STM015SC2DM010N STM015SC2DM012HN STM015SC2DM024N STM015SC2DM036N STM015SC2DMM01N STM015SC2DT006Q STM015SC2DT012HN STM015SC2DT012N STM015SC2DT030N STM015SC2DTC90Q STM015SC2DX005HN STM015SC2DX006HN STM015SC2DX010N STM015SC2DX012N STM015SC2DX018HN STM015SC2DXC15Q STM015SC4DX012Q STM015SC4DX030N STM015SC4DXC20N STM025PC0DC012N STM025PC0DC036N STM025PC0DC060N STM025PC0DM012N STM025PC0DM024N STM025PC0DM036N STM025PC2DC003 STM025PC2DC003N STM025PC2DC004 STM025PC2DC006 STM025PC2DC006N 7-1589476-6 1-1589777-7 7-1589476-7 7-1589476-8 7-1589476-9 8-1589476-0 2-1589788-6 8-1589472-4 8-1589472-5 8-1589472-6 8-1589472-7 8-1589472-8 8-1589472-9 9-1589472-0 6-1589475-3 8-1589788-9 9-1589472-1 9-1589472-2 3-1589476-6 3-1589476-7 3-1589476-8 3-1589476-9 4-1589476-0 9-1589472-3 1-1589788-2 9-1589472-4 9-1589472-5 9-1589472-6 9-1589472-7 9-1589472-8 9-1589472-9 7-1589788-9 0-1589473-1 0-1589473-2 0-1589473-3 0-1589473-4 0-1589473-5 0-1589473-6 0-1589473-7 8-1589475-3 0-1589473-8 0-1589473-9 2-1589473-3 9-1589475-0 2-1589475-9 3-1589475-8 2-1589473-4 4-1589788-1 2-1589473-5 2-1589473-6 8-1589475-4 2-1589788-8 5-1589788-3 6-1589788-3 3-1589788-2 6-1589475-7 4-1589476-1 8-1589477-2 4-1589476-2 4-1589476-3 4-1589476-4 4-1589476-5 4-1589476-6 4-1589476-7 4-1589476-8 4-1589476-9 5-1589476-0 5-1589476-1 2-1589777-5 5-1589476-2 5-1589476-3 5-1589476-4 5-1589476-5 4-1589777-7 5-1589476-6 9-1589477-1 5-1589476-7 8-1589477-0 4-1589473-2 4-1589473-3 4-1589473-4 4-1589473-5 4-1589473-6 4-1589473-7 4-1589473-8 4-1589473-9 5-1589473-0 5-1589473-1 0-1589788-9 5-1589473-2 5-1589473-3 5-1589473-4 5-1589473-5 4-1589788-2 5-1589473-6 5-1589473-7 5-1589473-8 5-1589473-9 6-1589473-0 6-1589473-1 6-1589473-2 4-1589475-1 3-1589788-9 6-1589473-3 2-1589475-8 5-1589788-9 6-1589473-4 6-1589473-5 6-1589473-6 6-1589473-7 6-1589473-8 6-1589788-5 6-1589473-9 7-1589473-0 0-1589777-6 8-1589476-1 8-1589476-2 1-1589777-9 8-1589476-3 8-1589476-4 1-1589777-4 1-1589777-2 4-1589777-0 1-1589777-0 8-1589476-5 8-1589476-6 8-1589476-7 4-1589777-4 8-1589476-8 8-1589477-1 8-1589476-9 9-1589476-0 9-1589476-1 9-1589476-2 9-1589476-3 9-1589476-4 9-1589476-5 9-1589476-6 9-1589476-7 7-1589473-3 5-1589788-5 4-1589475-4 7-1589473-4 1-1589788-4 4-1589788-5 7-1589473-5 7-1589473-6 7-1589473-7 7-1589473-8 7-1589473-9 172 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 DUALOBE Rectangular Connectors Part Number Index Cross Reference (Continued) Tyco Part Number Nanonics Part Number Tyco Part Number Nanonics Part Number Tyco Part Number Nanonics Part Number Tyco Part Number STM025PC2DC006Q STM025PC2DC008N STM025PC2DC010N 7-1589788-8 8-1589473-0 8-1589473-1 STM025PC4DX012M STM025PC4DX012N STM025SC0DC036N 2-1589474-4 2-1589474-5 3-1589777-0 STM037PC2DC012Q STM037PC2DC015N STM037PC2DC015Q 3-1589474-5 3-1589474-6 3-1589474-7 STM037SC2DC036N STM037SC2DC060Q STM037SC2DM010N 3-1589477-7 3-1589477-8 1-1589777-6 STM025PC2DC010Q STM025PC2DC012 STM025PC2DC012N STM025PC2DC015N STM025PC2DC016N STM025PC2DC018N STM025PC2DC020N STM025PC2DC020Q STM025PC2DC024N 6-1589788-0 8-1589473-2 8-1589473-3 8-1589473-4 8-1589473-5 8-1589473-6 8-1589473-7 8-1589473-8 8-1589473-9 STM025SC0DM036N STM025SC2DC003 STM025SC2DC004 STM025SC2DC006N STM025SC2DC008N STM025SC2DC012HN STM025SC2DC012N STM025SC2DC016N STM025SC2DC018N 2-1589777-6 9-1589476-8 9-1589476-9 0-1589477-1 0-1589477-2 0-1589477-3 0-1589477-4 0-1589477-5 0-1589477-6 STM037PC2DC018 STM037PC2DC018N STM037PC2DC020N STM037PC2DC020Q STM037PC2DC024 STM037PC2DC024N STM037PC2DC024Q STM037PC2DC030N STM037PC2DC036 4-1589475-0 3-1589474-9 4-1589475-2 4-1589474-0 4-1589474-1 4-1589474-2 5-1589475-2 4-1589474-3 4-1589474-4 STM037SC2DM024N STM037SC2DM036Q STM037SC2DT008N STM037SC2DT012N STM037SC2DT020Q STM037SC2DT030N STM037SC2DTC20Q STM037SC2DX006N STM037SC2DX010N 3-1589477-9 8-1589477-6 9-1589477-5 8-1589477-8 2-1589777-3 4-1589477-0 2-1589777-4 4-1589477-1 4-1589477-2 STM025PC2DC024Q STM025PC2DC030N STM025PC2DC036M 9-1589473-0 9-1589473-1 9-1589473-2 STM025SC2DC020N STM025SC2DC024N STM025SC2DC036N 0-1589477-7 0-1589477-8 0-1589477-9 STM037PC2DC036N STM037PC2DC036Q STM037PC2DC048N 4-1589474-5 4-1589474-6 4-1589474-7 STM037SC2DX012N STM037SC2GX006N STM051PC0DC012N 4-1589477-3 4-1589477-4 6-1589474-5 STM025PC2DC036N STM025PC2DC048N STM025PC2DC060N STM025PC2DC060Q STM025PC2DC072N STM025PC2DC084N STM025PC2DC120N STM025PC2DC180N STM025PC2DCC10Q STM025PC2DCC40N STM025PC2DCC46N STM025PC2DCC50N STM025PC2DCC60N STM025PC2DM006Q STM025PC2DM012N STM025PC2DM012Q STM025PC2DM018N STM025PC2DM020N STM025PC2DM024N STM025PC2DM036N STM025PC2DM072Q STM025PC2DT006N STM025PC2DT012M STM025PC2DT012N STM025PC2DT024N STM025PC2DT030N STM025PC2DT036Q STM025PC2DT048Q STM025PC2DT084N STM025PC2DX005 STM025PC2DX006N STM025PC2DX006Q STM025PC2DX010N STM025PC2DX012N STM025PC2DX018N STM025PC2DX048N STM025PC2DX072N STM025PC2DY004 STM025PC2DY006 STM025PC2DY006N STM025PC3DM024Q STM025PC3DX030N 9-1589473-3 9-1589473-4 9-1589473-5 9-1589473-6 9-1589473-7 7-1589475-9 STM025SC2DC040N STM025SC2DC048HN STM025SC2DC048N STM025SC2DC060HN STM025SC2DC060Q STM025SC2DC084N STM025SC2DC180N STM025SC2DCC46Q STM025SC2DCC60N STM025SC2DM010N STM025SC2DM012HN STM025SC2DM024N STM025SC2DM036N STM025SC2DT012HN STM025SC2DT012N STM025SC2DT030N STM025SC2DX005HN STM025SC2DX006N STM025SC2DX010N STM025SC2DX012N STM025SC2DX018N STM025SC2DY018N STM025SC3DC012N STM025SC3DMC20DQ STM025SC3DX030N STM025SC4DX030N STM037PC0DC009N STM037PC0DC009Q STM037PC0DC036N STM037PC0DM024N STM037PC0DM036N STM037PC0DM060N STM037PC0DXC10N STM037PC2DC001N STM037PC2DC003N STM037PC2DC005N STM037PC2DC006M STM037PC2DC006N STM037PC2DC010Q STM037PC2DC012 STM037PC2DC012M STM037PC2DC012N 1-1589477-0 1-1589477-1 1-1589477-2 1-1589477-3 1-1589477-4 9-1589477-8 STM037PC2DC060Q STM037PC2DC072N STM037PC2DCC20Q STM037PC2DCC50N STM037PC2DCC50Q STM037PC2DCM01Q STM037PC2DM012N STM037PC2DM018N STM037PC2DM020N STM037PC2DM024M STM037PC2DM024N STM037PC2DM036 STM037PC2DM036Q STM037PC2DT006N STM037PC2DT012M STM037PC2DT012N STM037PC2DT030N STM037PC2DT036N STM037PC2DT036Q STM037PC2DTC20Q STM037PC2DX006N STM037PC2DX010N STM037PC2DX012N STM037PC2DX024N STM037PC2GX006N STM037PC3DC012N STM037PC3DM024Q STM037SC0DC036N STM037SC0DM036N STM037SC0DM060N STM037SC0DXC10N STM037SC2DC006N STM037SC2DC006Q STM037SC2DC012HN STM037SC2DC012N STM037SC2DC012Q STM037SC2DC015N STM037SC2DC015Q STM037SC2DC018HN STM037SC2DC018N STM037SC2DC020Q STM037SC2DC024N 4-1589474-8 4-1589474-9 5-1589474-0 5-1589474-1 8-1589788-8 5-1589474-2 STM051PC0DC036N STM051PC0DC048N STM051PC0DM036N STM051PC0DM060N STM051PC0DXC10N STM051PC1DXC20 STM051PC2DC003N STM051PC2DC006 STM051PC2DC006N STM051PC2DC012N STM051PC2DC012Q STM051PC2DC015N STM051PC2DC015Q STM051PC2DC016N STM051PC2DC018 STM051PC2DC018N STM051PC2DC018Q STM051PC2DC024 STM051PC2DC024N STM051PC2DC030N STM051PC2DC036N STM051PC2DC036Q STM051PC2DC060N STM051PC2DC060Q STM051PC2DCC20N STM051PC2DCC30N STM051PC2DCC50N STM051PC2DCC50Q STM051PC2DM018N STM051PC2DM024N STM051PC2DMM01N STM051PC2DT012N STM051PC2DT018N STM051PC2DT030N STM051PC2DT036N STM051PC2DT036Q STM051PC2DT072N STM051PC2DX012N STM051PC2DX012Q STM051PC2DX015N STM051PC2DX018 STM051PC2DX018N 5-1589788-7 6-1589474-6 1-1589788-9 2-1589788-2 6-1589474-7 6-1589474-8 9-1589473-8 9-1589473-9 1-1589788-0 0-1589474-1 8-1589788-7 0-1589474-2 0-1589474-3 0-1589474-4 0-1589788-7 0-1589474-5 0-1589474-6 4-1589788-3 0-1589474-7 0-1589474-8 1-1589788-6 3-1589475-4 4-1589475-6 0-1589474-9 4-1589788-9 1-1589474-0 1-1589474-1 1-1589474-2 6-1589788-4 1-1589474-3 1-1589474-4 1-1589474-5 1-1589474-6 1-1589474-7 1-1589474-8 1-1589474-9 6-1589788-6 2-1589474-0 2-1589474-1 2-1589474-2 6-1589475-9 9-1589475-1 1-1589477-5 4-1589777-8 1-1589477-6 1-1589777-5 1-1589777-3 4-1589777-1 1-1589777-1 1-1589477-7 8-1589477-7 1-1589477-8 1-1589477-9 2-1589477-0 2-1589477-1 2-1589477-2 2-1589477-3 2-1589477-4 2-1589477-5 2-1589477-6 0-1589777-4 2-1589477-7 2-1589474-6 8-1589788-5 5-1589788-6 1-1589788-5 1-1589788-8 2-1589788-1 2-1589474-7 6-1589788-7 2-1589474-8 2-1589474-9 3-1589474-0 3-1589474-1 6-1589788-1 3-1589474-2 3-1589474-3 3-1589474-4 5-1589475-1 5-1589474-3 4-1589788-4 5-1589474-4 5-1589474-5 7-1589788-7 4-1589475-5 3-1589475-5 4-1589475-7 5-1589474-7 5-1589474-8 6-1589788-8 8-1589788-0 5-1589788-0 5-1589474-9 6-1589474-0 6-1589474-1 6-1589474-2 6-1589474-3 6-1589474-4 7-1589475-0 3-1589777-1 3-1589777-7 2-1589777-2 2-1589477-8 2-1589477-9 3-1589477-0 0-1589777-9 3-1589477-1 9-1589477-0 3-1589477-2 8-1589477-9 3-1589477-3 3-1589477-4 3-1589477-5 3-1589477-6 DUALOBE Rectangular Connectors Nanonics Part Number 5 6-1589474-9 7-1589474-0 7-1589474-1 7-1589474-2 7-1589474-3 7-1589474-4 2-1589788-0 7-1589474-5 7-1589474-6 7-1589474-7 7-1589474-8 6-1589475-6 7-1589474-9 8-1589474-0 8-1589474-1 8-1589474-2 8-1589474-3 8-1589474-4 8-1589474-5 9-1589475-7 3-1589788-5 3-1589788-6 8-1589474-6 7-1589788-0 8-1589474-7 8-1589474-9 7-1589788-2 9-1589474-0 9-1589474-1 8-1589788-1 9-1589474-2 9-1589474-3 9-1589474-4 9-1589474-5 9-1589474-6 9-1589474-7 173 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 DUALOBE Rectangular Connectors Part Number Index Cross Reference (Continued) Nanonics Part Number Tyco Part Number Nanonics Part Number Tyco Part Number STM051PC2DY015N STM051PC2GX006N STM051PC2GX012N 9-1589474-8 3-1589475-6 3-1589788-1 STM065PC2DM024N STM065PC2DM036N STM065PC2DMC46N 5-1589475-0 6-1589788-2 4-1589788-0 STM051PC2GXM01N STM051SC0DC036N STM051SC0DXC10N STM051SC1DXC20 STM051SC2DC003N STM051SC2DC006 STM051SC2DC006N STM051SC2DC008Q STM051SC2DC012N 9-1589474-9 3-1589777-2 4-1589477-5 4-1589477-6 4-1589477-7 4-1589477-8 4-1589477-9 3-1589777-5 5-1589477-0 STM065PC2DT012N STM065PC2DT018N STM065PC2DT030N STM065PC2DTC10N STM065PC2DX006N STM065PC2DX018N STM065PC2DX036N STM065PC2DY012N STM065PC2DY012Q STM051SC2DC015HN STM051SC2DC015N STM051SC2DC016N 5-1589477-1 5-1589477-2 5-1589477-3 STM051SC2DC018HN STM051SC2DC018N STM051SC2DC018Q STM051SC2DC036N STM051SC2DC036Q STM051SC2DC060N STM051SC2DC060Q STM051SC2DM012N STM051SC2DM024N STM051SC2DMM01N STM051SC2DT012N STM051SC2DT018N STM051SC2DT030N STM051SC2DX012N STM051SC2DX015N STM065PC0DC036N STM065PC0DM036N STM065PC0DM060N STM065PC0DMC30Q STM065PC0DMM01Q STM065PC2DC003N STM065PC2DC006 STM065PC2DC006N STM065PC2DC008Q STM065PC2DC012N STM065PC2DC012Q STM065PC2DC016M STM065PC2DC016N STM065PC2DC018M STM065PC2DC018N STM065PC2DC018Q STM065PC2DC020N STM065PC2DC024N STM065PC2DC024Q STM065PC2DC030N STM065PC2DC036 STM065PC2DC036N STM065PC2DC072N STM065PC2DCC50N STM065PC2DCM01N STM065PC2DCM01Q STM065PC2DM018N 5-1589477-4 5-1589477-5 5-1589477-6 5-1589477-7 0-1589777-7 5-1589477-8 5-1589477-9 6-1589477-0 4-1589777-2 6-1589477-1 0-1589777-3 4-1589777-5 6-1589477-3 6-1589477-4 6-1589477-5 5-1589788-8 4-1589788-6 2-1589788-3 9-1589475-8 4-1589788-8 0-1589475-1 0-1589475-2 0-1589475-3 0-1589475-4 0-1589475-5 0-1589475-6 0-1589475-7 0-1589475-8 0-1589475-9 1-1589475-0 1-1589475-1 4-1589475-3 1-1589475-2 1-1589475-3 1-1589475-4 5-1589475-6 1-1589475-5 1-1589475-6 4-1589475-9 7-1589475-7 8-1589475-9 1-1589475-7 Nanonics Part Number Tyco Part Number Jumper Assemblies 1-1589735-4 2-1589672-0 2-1589672-1 JSM025PP2DXC17N JSM025PP2GX003N JSM025PP2GX024N JSM025PP4DXC20N JSM025PR2DC006N JSM025PR2DC1.5N JSM025PR2GX002N JSM025RR2DC006N JSM037PD2GXC02N 2-1589672-2 2-1589672-3 2-1589672-4 2-1589672-5 2-1589672-6 5-1589699-5 2-1589672-7 0-1589803-1 0-1589797-2 7-1589671-6 0-1589736-2 7-1589671-7 JSM037PD2GXC05N JSM037PD2GXC10N JSM037PP2DCC06Q 0-1589797-1 3-1589672-3 3-1589672-4 7-1589671-8 7-1589671-9 8-1589671-0 8-1589671-1 8-1589671-2 8-1589671-3 8-1589671-4 8-1589671-5 8-1589671-6 8-1589671-7 8-1589671-8 8-1589671-9 0-1589736-4 9-1589671-0 1-1589735-0 0-1589735-9 0-1589735-3 0-1589735-5 0-1589735-4 9-1589671-1 9-1589671-5 9-1589671-6 1-1589735-2 9-1589671-7 0-1589735-6 9-1589671-8 9-1589671-9 0-1589672-6 0-1589797-3 1-1589735-1 1-1589735-3 0-1589799-3 0-1589799-2 0-1589799-1 0-1589672-7 0-1589672-8 0-1589672-9 1-1589672-0 1-1589672-1 4-1589699-9 1-1589672-2 0-1589736-1 JSM037PP2DCC08Q JSM037PP2DX018N JSM037PP2GX072N JSM037PR2DTC03N JSM051PD2GXC10N JSM051PD2GXC12 JSM051PD2GXC12N JSM051PD2GXC15N JSM051PD2GXC17N JSM051PD2GXC50N JSM051PP2DCC12Q JSM051PP2GXC12 JSM051PP2GXC12N JSM051PP2GXC17N JSM051PP2GXC22N JSM051PP2GXC50N JSM051PP2GXC75N JSM051PP2GXC80N JSM051PR2DC1.5N JSM051PR2GX002N JTL009PD2GX006N JTL009PD2GX012N JTL009PD2GX018N JTL009PP2DC012N JTL009PP2DX006N JTL009PR2DC018N JTL015PP2DX002N JTL015PP2DX006N JTL015PP2DX008M JTL015PP2DX014N JTL015PR0DC011N JTL015PR2DX008 JTL025PD2DC010N JTL025PD2DC1.25N JTL025PP2DC001M JTL025PP2DC001N JTL025PP2DC036N JTL025PP2DCC05N JTL025PP2DCC07N JTL025PP2DX002N JTL025PP2DX003N JTL025PP2DX010N 3-1589672-5 3-1589672-6 3-1589672-7 0-1589736-3 4-1589672-7 4-1589672-8 1-1589735-5 8-1589475-5 1-1589475-8 1-1589475-9 9-1589788-0 2-1589475-0 2-1589475-1 2-1589475-2 2-1589475-3 2-1589788-7 JSL009PP2DC006N JSL009PP2DX003N JSL009PP2DX006N JSL009PR2DC012N JSL009RR2DX0.5N JSL015PD2DX002N JSL015PP2DX001N JSL015PP2DX006N JSL025PP2DC012N JSL037PD2GXC02N 0-1589735-8 7-1589671-1 0-1589735-7 7-1589671-2 7-1589671-3 4-1589699-8 0-1589735-2 7-1589671-4 0-1589735-1 7-1589671-5 STM065PC2DY024N STM065PC2GXM01N STM065PC3DM006N 2-1589475-4 2-1589475-5 2-1589475-6 JSL037PR2DX002N JSL037PR2DX003N JSL051PD2GXC10N STM065PC3DX024N STM065SC0DC036N STM065SC2DC003N STM065SC2DC006 STM065SC2DC006N STM065SC2DC008Q STM065SC2DC012N STM065SC2DC012Q STM065SC2DC015N STM065SC2DC018 STM065SC2DC018N STM065SC2DC018Q STM065SC2DC024N STM065SC2DC024Q STM065SC2DC036 STM065SC2DC036HN STM065SC2DC036N STM065SC2DC036Q STM065SC2DM024N STM065SC2DT012N STM065SC2DT018N STM065SC2DT030N 2-1589475-7 3-1589777-3 6-1589477-6 6-1589477-7 6-1589477-8 3-1589777-6 JSL051PD2GXC17N JSL051PD2GXC22N JSL051PD2GXC30N JSL051PD2GXC75N JSL051PD2GXC80N JSL051PP2DC004N JSL051PP2GXC10N JSL051PP2GXC15N JSL051PP2GXC17N JSL051PP2GXC22N JSL051PP2GXC75N JSL051PP2GXC80N JSL051PR2GX002 JSM005PP2DC002N JSM005PP2DC003N JSM005PP2DC005N JSM005PP2DC008 JSM005PP2DC02.5N JSM005PP2DC072 JSM005PP2DT150N JSM009PP2DC002N JSM009PP2DC003N JSM009PP2DC006N JSM009PP2DC024N JSM009PP2DM005Q JSM009PR2DC002N JSM009PR2DC006N JSM015PD2DCC02N JSM015PD2GXC05N JSM015PP2DC004N JSM015PP2DC006N JSM015PP2GX001N JSM015PP2GX002N JSM015PP2GX006N JSM015PP2GX014N JSM015PP2GX018N JSM015PR2DC001N JSM015PR2DC002N JSM015PR2DC003N JSM015PR2DC004N JSM015PR2DC006N JSM015PR2DX003N 7-1589477-3 7-1589477-4 7-1589477-5 7-1589477-6 9-1589477-3 7-1589477-7 7-1589477-8 0-1589777-8 4-1589777-3 0-1589777-2 4-1589777-6 7-1589477-9 Tyco Part Number JSM025PP2DC006N JSM025PP2DX004N JSM025PP2DX008N JSL005PP2DC002N 6-1589477-9 7-1589477-0 7-1589477-1 7-1589477-2 Nanonics Part Number 4-1589672-9 5-1589672-0 5-1589672-1 5-1589672-2 5-1589672-3 5-1589672-4 5-1589672-5 5-1589672-6 5-1589672-7 5-1589672-8 5-1589672-9 6-1589672-0 5-1589699-6 6-1589672-1 3-1589729-8 7-1589699-3 3-1589729-9 0-1589737-3 1-1589737-7 5-1589699-8 0-1589737-1 1-1589737-6 9-1589672-5 5-1589699-0 1-1589738-3 9-1589672-6 5-1589699-9 5-1589699-7 4-1589737-3 4-1589737-2 9-1589672-8 0-1589737-5 9-1589672-9 0-1589673-1 0-1589673-2 0-1589673-3 174 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 DUALOBE Rectangular Connectors Part Number Index Cross Reference (Continued) Tyco Part Number Nanonics Part Number Tyco Part Number Nanonics Part Number Tyco Part Number Nanonics Part Number JTL025PR0DC007N JTL025PR2DCM31N JTL037PP2DC012N 1-1589738-4 0-1589673-4 4-1589737-0 JTM015PP2DY011N JTM015PP2DY022N JTM015PR2DC002N 2-1589737-0 2-1589737-1 7-1589673-8 JTM037PP2DX006Q JTM037PP2DX009Q JTM037PP2DX010Q 9-1589674-7 9-1589674-8 2-1589737-9 JTM065PR2GX001N JTM065RR2DC003 JTL037PP2DC024N JTL037PP2DC07.5N JTL037PP2DC08.5N JTL037PP2DC09.5N JTL037PP2DM006N JTL037PP2DX002N JTL037PP2DX003N JTL037PP2DX006N JTL037PP2DX012 4-1589737-1 0-1589673-5 0-1589673-6 0-1589673-7 0-1589737-7 0-1589673-8 0-1589673-9 1-1589737-5 1-1589673-0 JTM015PR2DC003Q JTM015PR2DC012M JTM015PR2DT001N JTM015PR2DT002M JTM015PR2DX001N JTM015PR2DX003N JTM015RR2DC012N JTM025PD2GX002N JTM025PP2DC001N 2-1589738-0 7-1589673-9 8-1589673-0 0-1589738-2 2-1589738-6 0-1589738-6 0-1589804-1 0-1589798-3 4-1589737-7 JTM037PP2DX016 JTM037PP2DX024N JTM037PP2DX3.5N JTM037PR0DC036M JTM037PR2DC003Q JTM037PR2DC005N JTM037PR2DCC16Q JTM037PR2DT001N JTM037PR2DT002M 9-1589674-9 0-1589675-1 2-1589737-6 0-1589675-3 2-1589738-2 1-1589738-2 1-1589738-0 0-1589675-4 0-1589738-4 Surface Mount JTL037PP2DX012N JTL037PR2DC012N JTL037PR2DC024N 2-1589737-7 3-1589738-0 3-1589738-1 JTM025PP2DC012N JTM025PP2DC018N JTM025PP2DC024N 4-1589737-6 3-1589737-3 3-1589737-5 JTM037PR2DX001 JTM037PR2DX001N JTM037PR2DX001Q 1-1589738-1 0-1589675-5 1-1589738-6 JTL037PR2DT024N JTL037PR2DX001 JTL051PP2DC009N JTL051PP2DX002N JTL051PP2DX006N JTL051PP2DX010N JTL051PP2DX024N JTL051PR2DC012N JTL051PR2DC048 JTL065PP2DC005N JTL065PP2DC006N JTL065PP2DC012N JTL065PP2DCC05N JTL065PP2DX012N JTL065PR2DX002N JTM009PD2DX003N JTM009PD2DX006N JTM009PP2DC006N JTM009PP2DC012N JTM009PP2DC02.5N JTM009PP2DM004N JTM009PP2DT002N JTM009PP2DT004N JTM009PP2DX006N JTM009PR2DC003Q JTM009PR2DCC50N JTM009PR2DT002M JTM009PR2DX001N JTM015PD2DX006N JTM015PD2GX006N JTM015PD2GX012N JTM015PP2DC006M JTM015PP2DC012M JTM015PP2DC02.5N JTM015PP2DC05.5N JTM015PP2DT004N JTM015PP2DX001N JTM015PP2DX005Q JTM015PP2DX006N JTM015PP2DX009N JTM015PP2DX024N JTM015PP2DY003N 1-1589673-1 0-1589738-9 0-1589737-4 1-1589673-4 1-1589673-5 1-1589673-6 JTM025PP2DC030N JTM025PP2DC035N JTM025PP2DC2.75N JTM025PP2DM024M JTM025PP2DX001N JTM025PP2DX012N JTM025PP2DX018N JTM025PP2DX022N JTM025PP2DX03.8M JTM025PP2DX03.8N JTM025PP2DX040N JTM025PP2DY006 JTM025PP2DY006N JTM025PP2DY020N JTM025PP2DY024N JTM025PR0DXC20N JTM025PR0DXC30N JTM025PR2DC003Q JTM025PR2DT001N JTM025PR2DT002M JTM025PR2DT240N JTM025PR2DX0.5N JTM025PR2DX001N JTM025PR2DX003N JTM025PR2DX006Q JTM025PR2DX012N JTM025PR2DX020 JTM037PD2DC002N JTM037PD2DC004N JTM037PD2GX012N JTM037PD2GX024N JTM037PP0DM006 JTM037PP0DM006N JTM037PP2DC018N JTM037PP2DC024N JTM037PP2DC036N JTM037PP2DC041N JTM037PP2DX001.75N JTM037PP2DX001N JTM037PP2DX002N JTM037PP2DX002Q JTM037PP2DX004N 3-1589737-7 5-1589737-0 1-1589737-8 3-1589737-2 2-1589674-8 2-1589674-9 JTM037PR2DX006Q JTM037PR2GX002 JTM037PR2GX003N JTM051PD2DC002N JTM051PD2DT004N JTM051PD2DXC10N JTM051PP2DC001N JTM051PP2DC004N JTM051PP2DC2.5N JTM051PP2DT005 JTM051PP2DX001N JTM051PP2DX004N JTM051PP2DX009Q JTM051PP2DX012N JTM051PP2DX036N JTM051PP2DX040N JTM051PP2DX2.5N JTM051PP2DX4.5N JTM051PR0DC036N JTM051PR2DC002N JTM051PR2DC003Q JTM051PR2DC005 JTM051PR2DC006Q JTM051PR2DC018N JTM051PR2DT001N JTM051PR2DX002N JTM051PR2GX002 JTM051PR2GX006Q JTM051RR2DC003 JTM065PD2GX022N JTM065PP2DC004N JTM065PP2DMC10Q JTM065PP2DX002N JTM065PP2DX004N JTM065PP2DX006N JTM065PP2DX007N JTM065PR2DC001N JTM065PR2DC003 JTM065PR2DC003N JTM065PR2DX001N JTM065PR2DX004N JTM065PR2DX004Q 1-1589738-7 0-1589675-6 0-1589675-7 0-1589798-4 6-1589675-1 6-1589675-2 1-1589673-7 1-1589738-5 1-1589673-8 2-1589737-2 2-1589737-5 2-1589673-3 2-1589673-4 0-1589737-8 0-1589738-8 3-1589673-1 3-1589673-2 4-1589737-9 4-1589737-8 3-1589673-3 1-1589737-0 3-1589673-4 3-1589673-5 3-1589673-6 1-1589738-9 3-1589673-7 0-1589738-3 2-1589738-5 0-1589798-1 0-1589798-2 6-1589673-4 6-1589673-5 6-1589673-6 6-1589673-7 4-1589737-4 6-1589673-8 6-1589673-9 2-1589737-8 7-1589673-0 7-1589673-1 7-1589673-2 1-1589737-9 3-1589674-0 3-1589674-1 3-1589674-2 3-1589674-3 2-1589737-4 0-1589737-6 3-1589674-4 3-1589674-5 2-1589737-3 3-1589674-6 3-1589674-7 2-1589738-1 3-1589674-8 0-1589738-1 3-1589674-9 4-1589674-0 2-1589738-7 0-1589738-5 4-1589674-1 4-1589674-2 4-1589674-3 8-1589674-8 8-1589674-9 9-1589674-0 9-1589674-1 9-1589674-2 3-1589737-9 3-1589737-4 3-1589737-6 3-1589737-8 5-1589737-1 9-1589674-3 9-1589674-4 0-1589737-9 3-1589737-0 9-1589674-6 4-1589737-5 6-1589675-3 7-1589699-4 0-1589737-2 6-1589675-4 6-1589675-5 5-1589737-2 6-1589675-6 1-1589737-3 1-1589737-4 6-1589675-7 6-1589675-8 2-1589738-9 6-1589675-9 2-1589738-3 7-1589675-0 2-1589738-4 0-1589738-7 7-1589675-1 7-1589675-2 7-1589675-3 7-1589675-4 7-1589675-5 7-1589699-1 1-1589737-2 3-1589737-1 0-1589676-1 0-1589676-2 0-1589676-3 0-1589676-4 0-1589676-5 0-1589676-6 0-1589676-7 2-1589738-8 0-1589676-8 1-1589738-8 SSL005L2AN SSL005L2HN SSL009B2H SSL009L2AN SSL009L2AQ SSL009L2HN SSL009L42HN SSL009L43KN SSL009L4CN SSL009L4KN SSL015L2AN SSL015L2AQ SSL015L2CN SSL015L2H SSL015L2HN SSL015L4N SSL015L4PQ SSL025B2 SSL025L23N SSL025L2AN SSL025L2HN SSL025L42 SSL037B2H SSL037B2N SSL037L2HN SSL037L43KN SSL051B2 SSL051L2CN SSL051L2HN SSM005L2HN SSM005L2N SSM005L82HN SSM005L84HN SSM005L85HN SSM009B2H SSM009B2N SSM009L2 SSM009L2AN SSM009L2AQ SSM009L2HN SSM009L2N SSM009L2SN SSM009L42KN SSM009L44KN SSM009L44N SSM009L4AQ SSM009L4KN SSM009L85HN SSM015B2N SSM015B45H SSM015H5 SSM015L2AN SSM015L2AQ DUALOBE Rectangular Connectors Nanonics Part Number Tyco Part Number 0-1589676-9 1-1589676-0 0-1589462-5 0-1589462-6 0-1589700-2 0-1589462-7 0-1589462-8 0-1589462-9 0-1589463-1 0-1589464-1 0-1589463-2 0-1589463-3 1-1589462-0 5 1-1589462-1 1-1589462-2 1-1589462-3 1-1589462-4 0-1589463-4 2-1589463-6 0-1589460-1 1-1589462-5 1-1589462-6 1-1589462-7 0-1589463-5 0-1589700-3 0-1589460-4 1-1589462-8 0-1589464-2 0-1589460-5 1-1589462-9 2-1589462-0 2-1589462-1 4-1589462-8 0-1589467-3 0-1589467-4 0-1589468-1 0-1589700-4 0-1589460-7 2-1589462-2 2-1589462-3 2-1589462-4 2-1589462-5 2-1589462-6 2-1589462-7 0-1589463-6 0-1589463-7 0-1589463-8 2-1589463-7 0-1589463-9 0-1589468-2 1-1589460-3 0-1589466-1 0-1589819-1 2-1589462-8 2-1589462-9 175 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 DUALOBE Rectangular Connectors Part Number Index Cross Reference (Continued) Nanonics Part Number Tyco Part Number Nanonics Part Number Tyco Part Number Nanonics Part Number Tyco Part Number SSM015L2CN SSM015L2HN SSM015L2N 3-1589462-0 3-1589462-1 4-1589462-7 STL009L44KN STL009L4KN STL009L4N 9-1589484-3 0-1589484-3 9-1589484-2 STL065L42KN STL065L44N STL065L4CQ 2-1589484-0 2-1589484-1 2-1589484-2 SSM015L2SN SSM015L44KN SSM015L4KN SSM015L4PQ SSM015L82HN SSM015L84HN SSM015L85HN SSM025B2H SSM025B44N 3-1589462-2 1-1589463-0 1-1589463-1 1-1589463-2 0-1589467-2 0-1589467-5 0-1589468-3 0-1589700-5 0-1589465-1 STL015B2N STL015B44N STL015L23N STL015L2AN STL015L2AQ STL015L2CN STL015L2HN STL015L2HQ STL015L2N 0-1589490-1 0-1589485-1 1-1589483-0 1-1589483-1 1-1589483-2 1-1589483-3 1-1589483-4 8-1589483-7 8-1589483-6 STL065L4KN STL065T5 STM009B2N STM009B42N STM009B44Q STM009H2N STM009L23N STM009L2AN STM009L2AQ 2-1589484-3 0-1589814-1 1-1589490-2 0-1589485-3 1-1589485-5 0-1589902-4 2-1589483-9 9-1589483-9 8-1589483-2 SSM025B45K SSM025L23N SSM025L2AN 0-1589466-2 3-1589462-3 3-1589462-4 STL015L423N STL015L42KN STL015L44KN 0-1589484-4 0-1589484-5 0-1589484-6 STM009L2CN STM009L2HN STM009L2N 7-1589483-8 3-1589483-0 3-1589483-1 SSM025L2AQ SSM025L2GQ SSM025L2HN SSM025L2N SSM025L2SN SSM025L42HN SSM025L44HN SSM025L44KN SSM025L44SN SSM025L45KN SSM025L4HN SSM025L4KN SSM025L4PQ SSM025L4SN SSM037B2 SSM037B2H SSM037B2N SSM037L2AQ SSM037L2HN SSM037L2IQ SSM037L42IQ SSM037L42KN SSM037L4KN SSM037L82AQ SSM037L84KN SSM037L85PQ SSM051B2H SSM051L2AQ SSM051L2GQ SSM051L2HN SSM051L2IQ SSM051L42KN SSM051L44KN SSM051L4KN STL009L23N STL009L2AQ STL009L2H STL009L2HN STL009L423N STL009L42CN STL009L42HN STL009L42KN 3-1589462-5 4-1589462-9 3-1589462-6 5-1589462-2 3-1589462-8 2-1589463-4 STL015L44N STL015L4CQ STL015L4HN STL015L4KN STL025B2 STL025B2N STL025B44M STL025L2AN STL025L2AQ STL025L2CN STL025L2HN STL025L2HQ STL025L2JN STL025L42KN STL025L44KN STL025L44N STL025L4HN STL025L4KN STL025L4PQ STL037B2M STL037B42 STL037L23N STL037L2AN STL037L2AQ STL037L2HN STL037L2JN STL037L2KN STL037L2N STL037L42KN STL037L44KN STL037L4HN STL051L2AN STL051L2AQ STL051L2CN STL051L2HN STL051L42KN STL051L4HN STL051L4KN STL051L4PQ STL065L2AQ STL065L2HN STL065L2N 0-1589484-7 0-1589484-8 0-1589484-9 1-1589484-0 0-1589490-2 1-1589490-1 STM009L2SN STM009L42CN STM009L42HN STM009L42KN STM009L44HN STM009L44PQ STM009L44Q STM009L4AQ STM009L4KN STM009L4PQ STM009L84HN STM009L8HN STM015B2N STM015B42N STM015H2N STM015H5Q STM015L23N STM015L2AQ STM015L2CN STM015L2HN STM015L2HQ STM015L2LQ STM015L2N STM015L2SN STM015L42KN STM015L44AQ STM015L44HN STM015L44KN STM015L44Q STM015L4HN STM015L4KN STM015L4PQ STM015L4SN STM015L82CN STM015L82HN STM015L82IQ STM015L82LQ STM015L84AQ STM015L84CN STM015L84HN STM015L84IQ STM015L84KN 3-1589483-2 8-1589484-1 2-1589484-4 2-1589484-5 2-1589484-6 2-1589484-7 1-1589463-3 1-1589463-4 2-1589463-8 0-1589464-3 1-1589463-5 1-1589463-6 1-1589463-7 1-1589463-8 0-1589460-9 0-1589700-6 1-1589460-2 3-1589462-9 4-1589462-1 5-1589462-1 2-1589463-5 1-1589463-9 2-1589463-0 0-1589467-6 0-1589467-1 0-1589468-4 0-1589700-1 4-1589462-3 5-1589462-0 4-1589462-4 4-1589462-5 2-1589463-1 2-1589463-2 2-1589463-3 8-1589483-3 9-1589483-2 0-1589483-8 0-1589483-9 0-1589484-1 9-1589484-0 8-1589484-4 0-1589484-2 2-1589485-3 1-1589483-5 1-1589483-6 8-1589483-9 1-1589483-7 8-1589483-8 1-1589483-8 1-1589484-1 9-1589484-4 1-1589484-2 1-1589484-3 1-1589484-4 8-1589484-6 1-1589490-3 0-1589485-2 1-1589483-9 2-1589483-0 2-1589483-1 2-1589483-2 2-1589483-3 9-1589483-7 8-1589483-5 8-1589484-2 1-1589484-5 1-1589484-6 9-1589483-4 2-1589483-4 2-1589483-5 2-1589483-6 1-1589484-7 1-1589484-8 1-1589484-9 8-1589484-7 9-1589483-0 2-1589483-7 2-1589483-8 2-1589484-8 2-1589484-9 3-1589484-0 3-1589484-1 2-1589486-4 1-1589486-7 0-1589490-3 0-1589485-4 0-1589902-3 0-1589813-1 3-1589483-4 3-1589483-5 7-1589483-7 3-1589483-6 3-1589483-7 3-1589483-8 3-1589483-9 4-1589483-0 3-1589484-2 3-1589484-3 3-1589484-4 3-1589484-5 3-1589484-6 3-1589484-7 3-1589484-8 3-1589484-9 8-1589484-8 3-1589486-0 0-1589486-1 1-1589486-3 2-1589486-1 3-1589486-5 3-1589486-2 2-1589486-5 3-1589486-4 0-1589486-2 Nanonics Part Number STM015L8HN STM025B2N STM025B42N STM025B44 STM025B44N STM025B44Q STM025H2N STM025H44N STM025H5N STM025H5Q STM025L2AN STM025L2AQ STM025L2CN STM025L2HN STM025L2HQ STM025L2IQ STM025L2JN STM025L2N STM025L42CN STM025L42KN STM025L44HM STM025L44HN STM025L44KN STM025L44N STM025L44PQ STM025L44Q STM025L4CN STM025L4KN STM025L4LQ STM025L4PN STM025L4PQ STM025L4SN STM025L82CN STM025L82HN STM025L84CN STM025L84KN STM025L8HN STM037B2H STM037B2M STM037B2N STM037B4 STM037B42N STM037B42Q STM037B4N STM037H2N STM037L23N STM037L2AN STM037L2AQ STM037L2CN STM037L2HN STM037L2IQ STM037L2KN STM037L2N STM037L2SN STM037L2TQ STM037L42AQ STM037L42HN Tyco Part Number 3-1589486-7 0-1589490-4 0-1589485-5 0-1589485-6 1-1589485-9 1-1589485-7 0-1589902-2 0-1589817-1 0-1589813-2 0-1589813-3 4-1589483-2 4-1589483-3 4-1589483-4 4-1589483-5 4-1589483-6 4-1589483-7 4-1589483-8 4-1589483-9 7-1589484-9 4-1589484-0 4-1589484-1 4-1589484-2 4-1589484-3 4-1589484-4 4-1589484-5 4-1589484-6 7-1589484-6 4-1589484-7 4-1589484-8 4-1589484-9 5-1589484-0 5-1589484-1 2-1589486-9 0-1589486-3 3-1589486-3 0-1589486-4 0-1589486-9 0-1589480-1 1-1589490-4 0-1589490-5 2-1589485-0 0-1589485-8 1-1589485-8 0-1589485-9 0-1589902-1 5-1589483-2 5-1589483-3 5-1589483-4 8-1589483-1 5-1589483-5 9-1589483-1 9-1589483-8 8-1589483-4 5-1589483-7 9-1589483-5 9-1589484-7 5-1589484-2 176 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 DUALOBE Rectangular Connectors Part Number Index Cross Reference (Continued) Tyco Part Number STM037L42K STM037L42KN STM037L42PQ 5-1589484-3 5-1589484-4 8-1589484-3 STM037L44DQ STM037L44KN STM037L44N STM037L44PQ STM037L44Q STM037L44SN STM037L4CN STM037L4HN STM037L4KN 8-1589484-0 5-1589484-5 8-1589484-9 5-1589484-6 5-1589484-7 5-1589484-8 7-1589484-7 5-1589484-9 6-1589484-0 STM037L4PQ STM037L4SN STM037L82AQ 6-1589484-1 9-1589484-6 0-1589486-5 STM037L82HN STM037L82PQ STM037L84AQ STM037L84HN STM037L84N STM037L84PQ STM037L84SN STM037L8HN STM051B2H STM051B2N STM051B2Q STM051B42N STM051B4N STM051H5 STM051L23N STM051L2AQ STM051L2CN STM051L2HN STM051L2HQ STM051L2IQ STM051L2JN STM051L2Q STM051L2SN STM051L2TQ STM051L42HN STM051L42KN STM051L42N STM051L44HN STM051L44KN STM051L44PQ STM051L44Q STM051L4CN STM051L4HN STM051L4KN STM051L4PQ STM051L4SN STM051L82AQ STM051L82HN STM051L82IQ STM051L82LQ STM051L84HN STM051L8HN 1-1589486-2 1-1589486-1 1-1589486-6 2-1589486-7 1-1589486-9 3-1589486-6 3-1589486-8 4-1589486-0 0-1589480-2 0-1589490-6 0-1589490-8 1-1589485-0 2-1589485-2 0-1589813-4 5-1589483-9 6-1589483-0 6-1589483-2 6-1589483-3 6-1589483-4 7-1589483-9 6-1589483-5 6-1589483-6 6-1589483-8 9-1589483-6 6-1589484-3 6-1589484-4 6-1589484-5 6-1589484-6 6-1589484-7 6-1589484-8 6-1589484-9 7-1589484-8 9-1589484-1 7-1589484-0 7-1589484-1 9-1589484-5 3-1589486-9 2-1589486-0 1-1589486-5 2-1589486-2 2-1589486-8 1-1589486-0 Nanonics Part Number STM065B2H STM065B2N STM065B2Q STM065B42N STM065B42Q STM065B44 STM065B44N STM065B44Q STM065B4Q STM065L23N STM065L2AQ STM065L2CN STM065L2HN STM065L2IQ STM065L2JN STM065L2KN STM065L42HN STM065L42KN STM065L42N STM065L4KN STM065L82AQ STM065L82HN STM065L82IQ STM065L82LQ STM065L84HN STM065L84IQ STM065L84N STM065L8HN Tyco Part Number Tyco Part Number Nanonics Part Number Tyco Part Number 0-1589480-3 1-1589490-0 0-1589490-9 1-1589485-1 2-1589485-1 1-1589485-2 1-1589485-6 1-1589485-3 1-1589485-4 7-1589483-0 7-1589483-1 7-1589483-2 7-1589483-3 8-1589483-0 7-1589483-4 SSM009M5LQ SSM009M6AQ SSM009M6CN 0-1589470-7 1-1589469-8 1-1589469-9 STL037M5Q STL037M6HN STL037M6SN 1-1589488-4 6-1589487-6 1-1589487-5 SSM009M6DQ SSM009M6HN SSM009M6SN SSM015C5N SSM015C6N SSM015M5CN SSM015M5LQ SSM015M6HN SSM015M6SN 2-1589469-0 2-1589469-2 2-1589469-4 0-1589461-2 0-1589471-4 0-1589470-8 0-1589470-9 2-1589469-5 2-1589469-6 STL051M5CN STL051M5KN STL051M6A STL051M6AN STL051M6HN STL051M6IN STL051M6SN STL065M5KN STL065M6HN 1-1589488-5 5-1589488-4 1-1589487-6 8-1589487-0 6-1589487-7 8-1589487-1 1-1589487-7 5-1589488-3 8-1589487-2 SSM025C6Q SSM025M5CN SSM025M5HN 0-1589471-2 1-1589470-0 1-1589470-1 STL065M6SN STM009C5N STM009C5Q 1-1589487-8 1-1589482-3 1-1589482-5 7-1589483-5 7-1589484-2 SSM025M5LQ SSM025M5N SSM025M6AQ SSM025M6DQ SSM025M6HN SSM025M6SN SSM037C5Q SSM037C6N SSM037M6HN SSM037M6HQ SSM037M6SN SSM051C5N SSM051M5CN SSM051M6N SSM051M6SN STL009M5CN STL009M5KN STL009M5L STL009M6CN STL009M6HN STL015C5N STL015M5CN STL015M5KN STL015M5SN STL015M6CN STL015M6HN STL015M6KN STL015M6SN STL025C5N STL025C6N STL025M5 STL025M5CN STL025M5KN STL025M6 STL025M6D STL025M6DQ STL025M6HN STL025M6KN STL025M6N STL025M6SN STL037M5CN STL037M5LQ 1-1589470-2 1-1589470-4 4-1589469-6 2-1589469-7 2-1589469-8 3-1589469-0 STM009C6N STM009M5AQ STM009M5CN STM009M5DQ STM009M5HN STM009M5LQ STM009M5PQ STM009M5Q STM009M6AN STM009M6AQ STM009M6CN STM009M6DQ STM009M6HN STM009M6IQ STM009M6SN STM015C5N STM015C6N STM015M5AN STM015M5AQ STM015M5CN STM015M5HN STM015M5KN STM015M5LN STM015M5LQ STM015M5PQ STM015M5SN STM015M6AN STM015M6CN STM015M6DQ STM015M6HN STM015M6IQ STM015M6N STM015M6S STM015M6SN STM015M9AN STM015M9HN STM025C5N STM025C5Q STM025C6N STM025M5AQ STM025M5CN STM025M5HN STM025M5LQ 0-1589481-2 5-1589488-8 1-1589488-6 1-1589488-7 1-1589488-8 1-1589488-9 7-1589484-3 7-1589484-4 7-1589484-5 0-1589486-6 0-1589486-7 1-1589486-4 2-1589486-3 2-1589486-6 0-1589486-8 3-1589486-1 1-1589486-8 Through-Hole SSL005M6SN SSL009M5CN SSL009M6A SSL009M6CN SSL009M6D SSL009M6H SSL009M6SN SSL015M5KN SSL015M6A SSL015M6CN SSL015M6D SSL015M6N SSL015M6SN SSL025M5CN SSL025M6A SSL025M6CN SSL025M6D SSL025M6DQ SSL025M6H SSL025M6HN SSL025M6SQ SSL037M5N SSL037M6SN SSM005M6SN SSM009C5Q SSM009C6Q SSM009M5CN SSM009M5HN Nanonics Part Number 0-1589469-6 1-1589470-5 3-1589469-5 3-1589469-9 0-1589469-7 0-1589469-8 0-1589469-9 0-1589470-2 3-1589469-6 3-1589469-8 1-1589469-0 1-1589469-1 4-1589469-5 0-1589470-3 3-1589469-7 4-1589469-0 1-1589469-2 1-1589469-3 1-1589469-4 1-1589469-5 1-1589469-6 0-1589470-4 4-1589469-1 1-1589469-7 0-1589461-1 0-1589471-1 0-1589470-5 0-1589470-6 0-1589461-4 0-1589471-3 3-1589469-2 4-1589469-2 3-1589469-3 0-1589461-3 1-1589470-3 4-1589469-4 3-1589469-4 4-1589488-8 6-1589488-5 0-1589488-7 6-1589487-1 7-1589487-8 0-1589482-6 0-1589488-8 6-1589488-6 5-1589488-1 0-1589487-6 6-1589487-4 7-1589487-5 0-1589487-7 0-1589482-1 0-1589481-1 1-1589488-0 1-1589488-1 5-1589488-2 0-1589487-9 6-1589487-3 1-1589487-0 6-1589487-5 7-1589487-6 1-1589487-1 1-1589487-2 4-1589488-9 1-1589488-3 DUALOBE Rectangular Connectors Nanonics Part Number 5 5-1589488-9 2-1589488-0 1-1589487-9 5-1589487-6 6-1589487-9 2-1589487-0 2-1589487-1 5-1589487-7 2-1589487-2 0-1589482-7 0-1589481-3 2-1589488-1 7-1589488-1 2-1589488-2 2-1589488-3 2-1589488-4 2-1589488-5 2-1589488-6 2-1589488-7 6-1589488-7 2-1589487-3 6-1589487-8 2-1589487-4 2-1589487-5 5-1589487-8 2-1589487-6 2-1589487-7 2-1589487-8 0-1589489-1 0-1589489-3 0-1589482-2 1-1589482-1 0-1589481-4 6-1589488-4 2-1589488-8 2-1589488-9 3-1589488-0 177 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 DUALOBE Rectangular Connectors Part Number Index Cross Reference (Continued) Nanonics Part Number Tyco Part Number Nanonics Part Number Tyco Part Number STM025M5PQ STM025M5SN STM025M6AN 3-1589488-1 3-1589488-2 2-1589487-9 STM065M5FN STM065M5HN STM065M5IQ 5-1589488-5 5-1589488-0 7-1589488-2 STM025M6CN STM025M6DQ STM025M6HN STM025M6IQ STM025M6N STM025M6Q STM025M6SN STM025M9AN STM025M9HN 3-1589487-0 3-1589487-1 3-1589487-2 5-1589487-9 3-1589487-3 3-1589487-4 3-1589487-5 0-1589489-2 0-1589489-4 STM065M5LQ STM065M5N STM065M5SN STM065M6 STM065M6AQ STM065M6CN STM065M6HN STM065M6KN STM065M6SN 4-1589488-6 4-1589488-7 6-1589488-9 5-1589487-0 7-1589487-3 5-1589487-1 5-1589487-3 6-1589487-2 5-1589487-4 STM037C5 STM037C5N STM037C5Q 0-1589482-9 1-1589482-6 1-1589482-2 Flex Term "Duckbill" STM037C6N STM037C6Q STM037M5AN STM037M5AQ STM037M5CN STM037M5HN STM037M5N STM037M5PQ STM037M5SN STM037M6AN STM037M6AQ STM037M6CN STM037M6DN STM037M6DQ STM037M6HN STM037M6IQ STM037M6SN STM037M6SQ STM051C5 STM051C5N STM051C5Q STM051C6N STM051M5AQ STM051M5CN STM051M5DQ STM051M5LQ STM051M5PQ STM051M5SN STM051M6CN STM051M6DQ STM051M6HN STM051M6N STM051M6PQ STM051M6SN STM051M6SQ STM065C5M STM065C5N STM065C5Q STM065C6 STM065C6N STM065M5AQ STM065M5CN 0-1589481-5 0-1589481-9 3-1589488-3 5-1589488-7 3-1589488-4 3-1589488-5 3-1589488-6 3-1589488-7 3-1589488-8 3-1589487-6 3-1589487-7 7-1589487-9 3-1589487-8 3-1589487-9 4-1589487-0 6-1589487-0 4-1589487-1 4-1589487-2 1-1589482-0 0-1589482-3 0-1589482-4 0-1589481-6 3-1589488-9 4-1589488-0 4-1589488-1 4-1589488-2 4-1589488-3 6-1589488-8 4-1589487-3 4-1589487-4 4-1589487-5 7-1589487-2 4-1589487-6 4-1589487-7 4-1589487-8 0-1589482-8 1-1589482-4 0-1589482-5 0-1589481-7 0-1589481-8 7-1589488-0 4-1589488-4 STL00911378PC STL00911378PCN 0-1589066-3 0-1589066-4 STL00911378SCN STL01511378PCN STL02511378PCN STL02511378SCN STL03711378PC STL03711378PCN STL05111378PCN STL05111378SCHN STL06511378PC STL06511378PCN STL06511378SCN STM00911378PCN STM00911378SCN STM01511378PCN STM01511378SCN STM02511378PC STM02511378PCN STM02511378SCN STM03711378PCN STM03711378PCQ STM03711378SCN STM05111378PC STM05111378PCM STM05111378PCN STM05111378PCQ STM05111378SCN STM06511378PC STM06511378PCN STM06511378PCQ STM06511378SCN 0-1589067-1 0-1589066-5 0-1589066-6 0-1589067-2 2-1589066-4 0-1589066-7 0-1589066-8 0-1589067-3 0-1589066-9 1-1589066-0 0-1589067-4 1-1589066-1 0-1589067-6 2-1589066-3 0-1589067-7 1-1589066-2 1-1589066-3 0-1589067-8 1-1589066-4 1-1589066-5 1-1589067-2 1-1589066-6 1-1589066-7 1-1589066-8 1-1589066-9 0-1589067-9 2-1589066-2 2-1589066-0 2-1589066-1 1-1589067-0 Nanonics Part Number Tyco Part Number Solder Cup Termination SSL00511500PCN 0-1589051-1 SSL00511500SCN SSL00911500PC SSL00911500PCN SSL00911500SCN SSL01511500PCM SSL01511500PCN SSL01511500SCN SSM00511500PC SSM00511500PCH SSM00511500PCN 0-1589052-1 0-1589051-2 0-1589051-3 0-1589052-2 0-1589051-4 0-1589051-5 0-1589052-3 1-1589051-4 0-1589051-6 0-1589051-7 SSM00511500SCN SSM00911500PC SSM00911500PCN 0-1589052-4 0-1589051-8 0-1589051-9 SSM00911500SCN SSM01511500PCN SSM01511500SC SSM01511500SCN SSM02511500SCQ SSM03711500PC SSM03711500PCN SSM05111500PCN SSM05111500SCN STL00911500PC STL00911500PCN STL00911500SCN STL01511500PC STL01511500PCN STL01511500SCN STL02511500PC STL02511500PCN STL02511500SC STL03711500PCN STL03711500SCN STL05111500PCN STL06511500PCN STM00911500PCN STM00911500SCN STM01511500PCN STM01511500PCQ STM01511500SCHN STM01511500SCN STM01511500SCQ STM02511500PC STM02511500PCN STM02511500PCQ STM02511500SC STM02511500SCN STM03711500PCN STM03711500PCQ STM03711500SCN STM05111500PCN STM05111500PCQ STM05111500SCN STM05111500SCQ STM06511500PC 1-1589052-1 1-1589051-0 0-1589052-5 1-1589052-0 0-1589052-7 1-1589051-1 1-1589051-2 1-1589051-3 0-1589052-8 2-1589053-2 0-1589053-1 0-1589054-1 2-1589053-1 0-1589053-2 0-1589054-2 0-1589053-3 0-1589053-4 0-1589054-3 0-1589053-5 0-1589054-4 0-1589053-6 1-1589053-8 0-1589053-7 0-1589054-5 0-1589053-8 0-1589053-9 0-1589054-6 0-1589054-7 1-1589054-4 1-1589053-0 1-1589053-1 2-1589053-3 0-1589054-8 0-1589054-9 1-1589053-2 1-1589053-3 1-1589054-0 1-1589053-4 1-1589053-5 1-1589054-1 1-1589054-5 1-1589053-6 Nanonics Part Number STM06511500PCN STM06511500SCN STM06511500SCQ Tyco Part Number 1-1589053-7 1-1589054-2 1-1589054-6 Panel Mount PSM005SC2DC024N PSM009SC2DC060N PTM009SC2DC060N PTM015SC2DC024N PTM015SC2DC060N PTM025SC2DC060N PTM037SC2DC018N 0-1589851-2 0-1589851-1 0-1589050-7 0-1589050-4 0-1589050-5 0-1589050-6 0-1589050-3 PTM065SC2DC018N 0-1589050-2 178 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors Environmentally Sealed Circular Connectors NANONICS Circular Connectors 6 Nanonics environmentally sealed circular offering represents one of the industry's smallest and most reliable connector designs. These connectors are ideally suited for applications where high density and reliability, and reduced size and weight are serious design parameters. Along with these attributes, they also meet the immersion requirements of IP67, more specifically, one meter of water for two hours. Utilizing the same contact system and materials as the Dualobe(R) rectangular series of connectors, the circular connectors are manufactured to the performance specifications of MIL-DTL-83513. The plug connectors are offered in both a quick disconnect or threaded coupling configuration, and the receptacle connectors are offered in either a flush mount or panel mount configuration. The quick disconnect plug will mate with both the flush and panel Specifications Technical and Performance Data Electrical Contact Resistance - .003 - .008 ohms Current Rating - 1 amp max. per contact Dielectric Withstanding Voltage - Volts RMS 60 Hz at room ambient conditions. At sea level 500V. At 70,000 ft. 150V. Insulation Resistance - 5000 megohms min. (@ 500 VDC) at room ambient conditions. mount receptacles, while the threaded coupling plug will only mate with the panel mount receptacle. These connectors are available in pin counts of 7, 19, and 44. Optional backshells are also available for the plug connectors and the panel mount receptacle. Ideal for cableto-cable or cable-to-panel applications, Tyco Electronics can also accommodate harness assemblies and custom configurations. Magnetic Permeability - 2 mu max. Temperature Range -- -55C to +200C Durability - 250 mates/demates Jam Nut Torque- 7 Pos. - 6 in-lbs. max. 19 Pos. - 8 in-lbs. max. 44 Pos. - 10 in-lbs. max. Coupling Nut Torque - 7 Pos. - 6 in-lbs. max. 19 Pos. - 8 in-lbs. max. 44 Pos. - 10 in-lbs. max. 179 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors Quick Disconnect -- Plug Assemblies .25 [6.35] O.165 [4.19] O.25 [6.35] .525 [13.34] 19 Position Coupling Sleeve O-Ring Seal Position 1 Product Facts n n n n n n Metal Shell Positions: 7, 19 and 44 Environmental O-ring seal Push-Pull quick-disconnect coupling Factory wired to your specifications Contact Tyco Electronics for custom configurations Locking Ring 7 Position Drawing Number 1589055 Plug Assembly, Circular, Quick Disconnect, Metal, 7 Position .25 [6.35] 1589055 O .215 [5.46] O .30 [7.62] .525 [13.34] Position 1 Coupling Sleeve O-Ring Seal Locking Ring 19 Position Drawing Number 1589057 Plug Assembly, Circular, Quick Disconnect, Metal, 19 Position 1589057 180 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors Quick Disconnect -- Plug Assemblies (Continued) .25 [6.35] O.395 [10.03] O.315 [8.00] Position 1 NANONICS Circular Connectors .525 [13.34] Coupling Sleeve O-Ring Seal 6 Locking Ring 44 Position Drawing Number 1589059 Plug Assembly, Circular, Quick Disconnect, Metal, 44 Position 1589059 181 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors Quick Disconnect -- Plug Assemblies with Backshells Product Facts n n n n n n .25 [6.35] Metal Shell Positions: 7, 19 and 44 Environmental O-ring seal Factory wired to your specifications Backshell installed at factory Contact Tyco Electronics for custom configurations .215 [5.46] O.130 [3.30] O.25 [6.35] O.165 [4.19] .525 [13.34] .275 [6.99] Coupling Sleeve O-Ring Seal Position 1 Backshell Locking Ring 7 Position Drawing Number 1589691 Plug Assembly, Circular, Quick Disconnect, Metal, 7 Position w/ Backshell 1589691 .25 [6.35] .215 [5.46] O.180 [4.57] O.30 [7.62] O.215 [5.46] .525 [13.34] Position 1 .275 [6.99] Coupling Sleeve O-Ring Seal Backshell Locking Ring 19 Position Drawing Number 1589692 Plug Assembly, Circular, Quick Disconnect, Metal, 19 Position w/ Backshell 1589692 182 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors Quick Disconnect -- Plug Assemblies with Backshells (Continued) .25 [6.35] .265 [6.73] O.240 [6.10] O .395 [10.03] O.315 [8.00] Position 1 .325 [8.26] NANONICS Circular Connectors .525 [13.34] Coupling Sleeve O-Ring Seal 6 Locking Ring Backshell 44 Position Drawing Number 1589693 Plug Assembly, Circular, Quick Disconnect, Metal, 44 Position w/ Backshell 1589693 183 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors Quick Disconnect -- Receptacle Assemblies, Flush Mount .425 [10.80] .060 [1.52] Jam Nut O.312 [7.92] .065 [1.65] 19 Position .250 [6.35] Max Panel Thickness Position 1 O-Ring Seal Product Facts n n n n n Metal Shell Positions: 7, 19 and 44 Bulkhead O-ring seal Factory wired to your specifications Contact Tyco Electronics for custom configurations .204 [5.18] .312 [7.92] Hex (Jam Nut) 7 Position Drawing Number 1589056 Receptacle Assembly, Circular, Flush Mount, Quick Disconnect, Metal, 7 Position 1589056 .425 [10.80] .060 [1.52] Jam Nut O.375 [9.53] .250 [6.35] Max Panel Thickness .065 [1.65] O-Ring Seal Position 1 .258 [6.55] .375 [9.53] Hex (Jam Nut) 19 Position Drawing Number 1589058 Receptacle Assembly, Circular, Flush Mount, Quick Disconnect, Metal, 19 Position 1589058 184 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors Quick Disconnect -- Receptacle Assemblies, Flush Mount (Continued) .425 [10.80] .060 [1.52] Jam Nut O.500 [12.7] .258 [6.55] .250 [6.35] Max Panel Thickness .375 [9.53] Position 1 NANONICS Circular Connectors O-Ring Seal .065 [1.65] .500 [12.7] Hex (Jam Nut) 44 Position Drawing Number 1589690 6 185 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors Threaded Coupling -- Plug Assemblies .375 [9.53] O.165 [4.19] O.315 [8.00] 19 Position .525 [13.34] Product Facts n n n n n Coupling Nut Position 1 O-Ring Seal Metal Shell Positions: 7, 19 and 44 Environmental O-ring seal Factory wired to your specifications Contact Tyco Electronics for custom configurations 7 Position Drawing Number 1589063 Plug Assembly, Circular, Panel Mount, Threaded Coupling, Metal, 7 Position 1589063 .375 [9.53] O.355 [9.02] O .215 [5.46] .525 [13.34] Coupling Nut Position 1 O-Ring Seal 19 Position Drawing Number 1589064 Plug Assembly, Circular, Panel Mount, Threaded Coupling, Metal, 19 Position 1589064 186 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors Threaded Coupling -- Plug Assemblies (Continued) .375 [9.53] O .475 [12.07] O.315 [8.00] NANONICS Circular Connectors .525 [13.34] Coupling Nut Position 1 O-Ring Seal 6 44 Position Drawing Number 1589065 Plug Assembly, Circular, Threaded Coupling, Metal, 7 Position 1589065 187 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors Threaded Coupling -- Plug Assemblies with Backshells Product Facts n n n n n n .375 [9.53] Metal Shell Positions: 7, 19 and 44 Environmental O-ring seal Factory wired to your specifications Backshell installed at factory Contact Tyco Electronics for custom configurations O.315 [8.00] .215 [5.46] O.130 [3.30] O.25 [6.35] O.165 [4.19] .525 [13.34] .275 [6.99] Coupling Sleeve Position 1 O-Ring Seal Backshell 7 Position Drawing Number 1589686 Plug Assembly, Circular, Panel Mount, Threaded Coupling, Metal, 7 Position w/ Backshell 1589686 .375 [9.53] .215 [5.46] O.180 [4.57] O.355 [9.02] O.30 [7.62] O.215 [5.46] .525 [13.34] .275 [6.99] Coupling Nut Position 1 O-Ring Seal Backshell 19 Position Drawing Number 1589688 Plug Assembly, Circular, Threaded Coupling, Metal, 19 Position w/ Backshell 1589688 188 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors Threaded Coupling -- Plug Assemblies with Backshells (Continued) .375 [9.53] .265 [6.73] O.240 [6.10] O.475 [12.07] O.395 [10.03] O.315 [8.00] .325 [8.26] NANONICS Circular Connectors .525 [13.34] Coupling Nut Position 1 O-Ring Seal 6 Backshell 44 Position Drawing Number 1589694 Plug Assembly, Circular, Threaded Coupling, Metal, 44 Position w/ Backshell 1589694 189 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors Threaded Coupling/Quick Disconnect -- Receptacle Assemblies, Panel Mount .550 [13.97] .350 [8.89] .065 [1.65] 19 Position O.25 [6.35] .060 [1.52] Product Facts n n n n n n Metal Shell Positions: 7, 19 and 44 Bulkhead O-ring seal Factory wired to your specifications Panel Mount receptacle mates with the Quick Disconnect Plug and the Threaded Coupling Plug Contact Tyco Electronics for custom configurations O-Ring Seal Position 1 .406 [10.31] Hex .258 [6.55] Jam Nut 7 Position Drawing Number 1589060 Receptacle Assembly, Circular, Panel Mount, Threaded Coupling/ Quick Disconnect, Metal, 7 Position .550 [13.97] .065 [1.65] .350 [8.89] 1589060 O.30 [7.62] .060 [1.52] O-Ring Seal Position 1 .469 [11.91] Hex .298 [7.57] Jam Nut 19 Position Drawing Number 1589061 Receptacle Assembly, Circular, Panel Mount, Threaded Coupling/ Quick Disconnect, Metal, 19 Position 1589061 190 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors Threaded Coupling/Quick Disconnect -- Receptacle Assemblies, Panel Mount (Continued) .065 [1.65] .550 [13.97] .350 [8.89] O .395 [10.03] .060 [1.52] .563 [14.30] Hex NANONICS Circular Connectors O-Ring Seal Position 1 .414 [10.52] Jam Nut 44 Position Drawing Number 1589062 6 Receptacle Assembly, Circular, Panel Mount, Threaded Coupling/ Quick Disconnect, Metal, 44 Position 1589062 191 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors Threaded Coupling/Quick Disconnect -- Panel Mount Recp. Assemblies w/Backshells Product Facts n n n n n n Metal Shell Positions: 7, 19 and 44 Bulkhead O-ring seal Factory wired to your specifications Panel Mount receptacle mates with the Quick Disconnect Plug and the Threaded Coupling Plug Contact Tyco Electronics for custom configurations .275 [6.99] .550 [13.97] .350 [8.89] .065 [1.65] O.25 [6.35] O.130 [3.30] .215 [5.46] .060 [1.52] O-Ring Seal Position 1 .406 [10.31] Hex .258 [6.55] Backshell Jam Nut Receptacle Assembly 7 Position Drawing Number 1589685 Receptacle Assembly, Circular, Panel Mount, Threaded Coupling/Quick Disconnect, Metal, 7 Position w/ Backshell 1589685 .275 [6.99] .065 [1.65] .550 [13.97] .350 [8.89] O.30 [7.62] O.180 [4.57] .215 [5.46] .060 [1.52] O-Ring Seal Position 1 .469 [11.91] Hex .298 [7.57] Backshell Jam Nut Receptacle Assembly, Circular, Receptacle Assembly 19 Position Drawing Number 1589687 Panel Mount, Threaded Coupling/Quick Disconnect, Metal, 19 Position w/ Backshell 1589687 192 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors Threaded Coupling/Quick Disconnect -- Panel Mount Recp. Assemblies w/Backshells (Continued) .325 [8.26] .065 [1.65] O.395 [10.03] .550 [13.97] .350 [8.89] O.240 [6.10] NANONICS Circular Connectors .060 [1.52] O-Ring Seal Position 1 .563 [14.30] Hex .414 [10.52] Backshell 6 Jam Nut Receptacle Assembly 44 Position Drawing Number 1589695 Receptacle Assembly, Circular, Panel Mount, Threaded Coupling/Quick Disconnect, Metal, 44 Position w/ Backshell 1589695 193 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors Part Numbering Guideline for Environmentally Sealed Circular Connectors Circular Connectors - Wire Terminations XXX XXX XX X XX XXX X(X) Class/Type Circular Mounting/Features QCM Quick Disconnect, Circular, Metal TCM Threaded Coupling, Circular, Metal (TCM leadoff for plug only) Mounting (Receptacles Only) Features (Optional) P Panel Mount B Backshell (cannot be used with flush mount) F Flush Mount Positions 007 7 Position Conductor Length 019 19 Position XXX Three numbers only, length is in inches ( i.e. 012 = twelve inches) 044 44 Position CXX A "C" follwed by two numbers, length is in centimeters ( i.e. C06 = 6 centimeters) MXX An "M" followed by two numbers, length is in meters ( i.e. M02 = 2 meters) Configuration PC Plug Conductor Type SC Receptacle Conductor Size/Strands 0 28 AWG Solid 1 30 AWG Solid 2 30 AWG 7 Strand 3 32 AWG 7 Strand 4 34 AWG 7 Strand DX White Teflon DY White PTFE per M16878/6 DC Color Coded Teflon DM Color Coded Teflon per MIL-STD-681 DT White Tefzel per M22759/33 194 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors Part Number Index Cross Reference Nanonics Part Number Tyco Part Number Quick Disconnect 0-1589055-1 0-1589055-2 0-1589691-5 0-1589055-3 0-1589691-1 0-1589691-2 0-1589055-6 0-1589691-9 1-1589055-3 0-1589691-3 0-1589055-8 0-1589055-9 0-1589691-6 1-1589055-0 1-1589691-0 1-1589055-4 1-1589055-8 1-1589055-5 1-1589055-6 0-1589691-7 1-1589055-1 1-1589055-7 0-1589691-8 0-1589691-4 0-1589060-1 0-1589060-2 0-1589056-1 0-1589060-3 0-1589060-4 0-1589685-2 0-1589685-3 0-1589056-2 1-1589060-1 0-1589060-7 0-1589685-4 0-1589056-9 1-1589060-4 0-1589056-7 0-1589056-3 0-1589060-9 1-1589060-0 0-1589685-5 0-1589685-1 0-1589056-8 0-1589056-4 0-1589056-5 0-1589056-6 1-1589060-2 1-1589060-5 1-1589060-3 0-1589057-1 0-1589692-1 0-1589057-3 0-1589057-4 0-1589692-3 0-1589057-5 0-1589057-6 0-1589692-5 0-1589692-2 QCM019PC2DCC10 QCM019PC2DMC150 QCM019PC2DMC150B QCM019PC2DMC46 QCM019PC2DMM01 QCM019PC2DXC30 QCM019SC0DC012F QCM019SC0DC036P QCM019SC0DCC15P QCM019SC0DM012F QCM019SC0DM072F QCM019SC0DMC30P QCM019SC0DXC15P QCM019SC2DC003F QCM019SC2DC003P QCM019SC2DC006F QCM019SC2DC006P QCM019SC2DC012F QCM019SC2DC012P QCM019SC2DC018F QCM019SC2DC020F QCM019SC2DC020P QCM019SC2DC024P QCM019SC2DC036P QCM019SC2DC180F QCM019SC2DCC30P QCM019SC2DM006PB QCM019SC2DM024P QCM019SC2DM027PB QCM019SC2DM036P QCM019SC2DMC05F QCM019SC2DMC16F QCM019SC2DMC30P QCM019SC2DMC46F QCM019SC2DXC30F QCM019SC2DXC30P QCM019SC4DX006P QCM044PC2DC003 QCM044PC2DC006 QCM044PC2DC006B QCM044PC2DC012 QCM044PC2DC012B QCM044PC2DC020 QCM044PC2DC030 QCM044PC2DC036 QCM044PC2DC040 QCM044PC2DC050 QCM044PC2DC060B QCM044PC2DC120B QCM044PC2DC180B QCM044SC0DM036P QCM044SC0DM048P QCM044SC0DM060P QCM044SC2DC003P QCM044SC2DC006F QCM044SC2DC006P QCM044SC2DC012F QCM044SC2DC012P QCM044SC2DC018F QCM044SC2DC018P Tyco Part Number 1-1589057-1 1-1589057-2 0-1589692-4 0-1589057-8 1-1589057-0 0-1589057-9 0-1589058-1 1-1589061-4 0-1589061-1 1-1589058-7 0-1589058-2 1-1589061-2 0-1589061-2 1-1589058-8 0-1589061-3 0-1589058-3 0-1589061-4 1-1589058-6 0-1589061-5 0-1589058-4 0-1589058-5 0-1589061-6 1-1589061-5 0-1589061-7 1-1589058-4 0-1589061-8 0-1589687-2 1-1589061-6 0-1589687-1 1-1589061-0 1-1589058-5 0-1589058-6 1-1589061-3 0-1589058-7 0-1589058-8 0-1589061-9 1-1589061-1 0-1589059-1 0-1589059-2 0-1589693-1 0-1589059-4 0-1589693-2 0-1589059-6 0-1589059-7 1-1589059-1 1-1589059-2 1-1589059-0 0-1589693-3 0-1589693-4 0-1589693-5 1-1589062-3 1-1589062-4 1-1589062-5 0-1589062-1 0-1589690-3 0-1589062-2 0-1589690-4 0-1589062-3 0-1589690-5 0-1589062-8 Nanonics Part Number QCM044SC2DC019PB QCM044SC2DC020F QCM044SC2DC020P QCM044SC2DC024F QCM044SC2DC024P QCM044SC2DC036P QCM044SC2DC060F QCM044SC2DC080P QCM044SC2DC180F QCM044SC2DM036P QCM044SC2DM120P QCM044SC2DMC16P QCM044SC2DMC46P QCM044SC2DMC50P QCM044SC3DC012F Tyco Part Number Nanonics Part Number Tyco Part Number 0-1589695-1 0-1589690-1 1-1589062-2 0-1589690-8 1-1589062-6 0-1589062-5 0-1589690-6 1-1589062-1 0-1589690-2 0-1589062-9 1-1589062-0 0-1589062-6 0-1589062-7 1-1589062-7 0-1589690-7 TCM044PC2DC036 TCM044PC2DC036B TCM044PC2DC202B TCM044PC2DM036 TCM044PC2DM120 TCM044PC2DM120B TCM044PC2DMC46 0-1589065-8 0-1589694-5 0-1589694-7 1-1589065-1 1-1589065-6 0-1589694-6 1-1589065-0 NANONICS Circular Connectors QCM007PC2DC003 QCM007PC2DC006 QCM007PC2DC006B QCM007PC2DC012 QCM007PC2DC012B QCM007PC2DC018B QCM007PC2DC020 QCM007PC2DC020B QCM007PC2DC028 QCM007PC2DC036B QCM007PC2DC040 QCM007PC2DC072 QCM007PC2DCC20B QCM007PC2DCC30 QCM007PC2DCC50B QCM007PC2DCM01 QCM007PC2DCM02 QCM007PC2DCM03 QCM007PC2DMC150 QCM007PC2DMC150B QCM007PC2DMC46 QCM007PC2DMC50 QCM007PC2DMC50B QCM007PC2DX006B QCM007SC2DC003P QCM007SC2DC004P QCM007SC2DC006F QCM007SC2DC006P QCM007SC2DC012P QCM007SC2DC012PB QCM007SC2DC018PB QCM007SC2DC020F QCM007SC2DC020P QCM007SC2DC036P QCM007SC2DC036PB QCM007SC2DCC15F QCM007SC2DCC15P QCM007SC2DCC20F QCM007SC2DCC30F QCM007SC2DCC30P QCM007SC2DM003P QCM007SC2DM006PB QCM007SC2DM050PB QCM007SC2DMC05F QCM007SC2DMC16F QCM007SC2DMC46F QCM007SC2DX006F QCM007SC2DYC15P QCM007SC2DYM02P QCM007SC2DYM1.5P QCM019PC0DC012 QCM019PC0DM072B QCM019PC2DC003 QCM019PC2DC006 QCM019PC2DC006B QCM019PC2DC012 QCM019PC2DC020 QCM019PC2DC020B QCM019PC2DC120B Nanonics Part Number Threaded Coupling TCM007PC2DC003 TCM007PC2DC006 TCM007PC2DC006B TCM007PC2DC012 TCM007PC2DC012B TCM007PC2DC018B TCM007PC2DC020 TCM007PC2DC036 TCM007PC2DCM02 TCM007PC2DM003 TCM007PC2DM006B TCM007PC2DYC10B TCM007PC2DYM01B TCM019PC0DC036 TCM019PC0DCC10 TCM019PC0DXC10 TCM019PC2DC003 TCM019PC2DC006 TCM019PC2DC006B TCM019PC2DC012 TCM019PC2DC012B TCM019PC2DC020 TCM019PC2DC024 TCM019PC2DC036 TCM019PC2DC060B TCM019PC2DC066 TCM019PC2DCC30 TCM019PC2DM006B TCM019PC2DM024 TCM019PC2DM036 TCM044PC0DM036 TCM044PC0DM048 TCM044PC0DM060 TCM044PC2DC003 TCM044PC2DC006 TCM044PC2DC006B TCM044PC2DC012 TCM044PC2DC012B TCM044PC2DC018B TCM044PC2DC019B TCM044PC2DC020 TCM044PC2DC020B TCM044PC2DC024 0-1589063-1 0-1589063-2 0-1589686-2 0-1589063-4 0-1589686-3 0-1589686-4 0-1589063-9 0-1589063-7 1-1589063-0 0-1589063-8 0-1589686-1 0-1589686-5 0-1589686-6 1-1589064-5 0-1589064-1 0-1589064-2 0-1589064-3 0-1589064-4 0-1589688-2 0-1589064-6 0-1589688-3 1-1589064-4 0-1589064-8 0-1589064-9 0-1589688-4 1-1589064-1 1-1589064-2 0-1589688-1 1-1589064-6 1-1589064-3 1-1589065-3 1-1589065-4 1-1589065-5 0-1589065-1 0-1589065-2 0-1589694-1 0-1589065-4 0-1589694-2 0-1589694-3 0-1589694-4 1-1589065-2 0-1589694-8 1-1589065-7 6 195 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Circular Connectors Engineering Notes 196 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors Coaxial Connectors with 30 AWG or smaller discrete wire, can also be integrated into this connector package. These connectors are typically used in applications with frequencies up to 20 GHz. receptacle coax connector is also available in a horizontal surface mount configuration allowing for wire to board applications. Harness assemblies and custom configurations can also be accommodated. NANONICS Coaxial Connectors The Nanonics 50 ohm coaxial connector system combines the benefits of the rectangular DUALOBE connectors while offering the flexibility to terminate up to nine coaxial contacts within the same metal connector housing. Furthermore, with this unique design, five signal contacts, terminated RG-178 coax coaxial cable is the standard cable used on these connectors. The 7 Specifications Technical and Performance Data Electrical Contact Resistance - .003 - .008 ohms Current Rating - 1 amp max. per contact Dielectric Withstanding Voltage - Volts RMS 60 Hz at room ambient conditions. At sea level 500V. At 70,000 ft. 150V. Insulation Resistance - 5000 megohms min. (@ 500 VDC) at room ambient conditions. Magnetic Permeability - 2 mu max. Temperature Range -- -55C to +125C Outer Coaxial Contacts - BeCu Alloy plated with gold per MIL-G-45204 over nickel Dielectric Insert - Teflon Braid Termination - Soldered to outer coaxial contacts with SN63P637 solder Backpotting - Standard for wire terminations 197 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors Typical VSWR and Insertion Loss Note: Insertion Loss of 30 AWG Coax Cable @ (50 Ohm) is approximately 1.0db/ft. @ 3 GHz. The connector system with 6" of coax on each side, is better than 1.5db @ 3 GHz. 198 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors 50 Ohm Coax Connectors D .100 [2.54] Plug .075 2 Plcs. [1.91] .205 [5.21] .117 [2.97] B C .100 [2.54] Pitch .078 [1.98] Typ. .166 [4.22] Receptacle Plug Assembly Drawing Number 1589070 Plug Assembly, 1-9 Coax Only, 50 OHM, Metal Product Facts n n n D Metal Shell Standard Sizes: 1-9 Factory wired to your specifications Contact Tyco Electronics for custom configurations 1589070 NANONICS Coaxial Connectors n .100 [2.54] .112 [2.84] 2 Plcs. .223 [5.66] B .078 [1.98] Typ. 7 B .100 Pitch [2.54] .166 [4.22] C Receptacle Assembly Drawing Number 1589071 Size 1 2 3 4 5 6 7 8 9 B 0.254 0.354 0.454 0.554 0.654 0.754 0.854 0.954 1.054 [6.45] [8.99] [11.53] [14.07] [16.61] [19.15] [21.69] [24.23] [26.77] Dimensions C 0.335 [8.51] 0.435 [11.05] 0.535 [13.59] 0.635 [16.13] 0.735 [18.67] 0.835 [21.21] 0.935 [23.75] 1.035 [26.29] 1.135 [28.83] Receptacle Assembly, 1-9 Coax No. Coax Only, 50D OHM, Metal 0.180 [4.57] 1589071 0.280 [7.11] 0.380 [9.65] 0.480 [12.19] 0.580 [14.73] 0.680 [17.27] 0.780 [19.81] 0.880 [22.35] 0.980 [24.89] 1 2 3 4 5 6 7 8 9 199 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors Part Numbering Guideline for 50 Ohm Coax Connectors Coax Only Connectors - Wire Terminations CX XXX XX 2 RG XXX Class/Type CX X Threads/Jackscrews Coax, 50 Ohm Positions Threads (Receptacles Only) Jackscrews (Plugs Only) N Thread for 1.0 mm Jackscrews M 1.0 mm Non Captive Jackscrews Q Thread for 1.2 mm Jackscrews N 1.0 mm Captive Jackscrews Q 1.2 mm Captive Jackscrews 010 1 Position 020 2 Position Conductor Length 030 3 Position XXX Three numbers only, length is in inches ( i.e. 012 = twelve inches) 040 4 Position CXX A "C" follwed by two numbers, length is in centimeters ( i.e. C06 = 6 centimeters) 050 5 Position MXX An "M" followed by two numbers, length is in meters ( i.e. M02 = 2 meters) 060 6 Position 070 7 Position 080 8 Position Conductor Type 090 9 Position RG RG 178 Coaxial Cable Configuration Conductor Size PC Plug 2 30 AWG SC Receptacle 200 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors Horizontal SMT 50 Ohm Coax Connectors .100 [2.54] Pitch .0415 [1.05] .0075 Typ. [.19] A .112 [2.84] 2 Plcs. .223 [5.66] Surface Mount B Product Facts n n n n B Metal Shell Standard Sizes: 1-9 Factory wired to your specifications Contact Tyco Electronics for custom configurations .100 [2.54] Pitch .078 [1.98] Typ. .166 [4.22] .024 [.61] Typ. .323 [8.20] Typ. C Receptacle Assembly Drawing Number Receptacle 1589072 Assembly, NANONICS Coaxial Connectors Horizontal SMT, 1-9 Coax Only, 50 OHM, Metal 1589072 Size 1 2 3 4 5 6 7 8 9 A 0.0125 [.32] 0.0625 [1.59] 0.1125 [2.86] 0.1625 [4.13] 0.2125 [5.40] 0.2625 [6.67] 0.3125 [7.94] 0.3625 [9.21] 0.4125 [10.48] Dimensions B 0.254 [6.45] 0.354 [8.99] 0.454 [11.53] 0.554 [14.07] 0.654 [16.61] 0.754 [19.15] 0.854 [21.69] 0.954 [24.23] 1.054 [26.77] C 0.335 0.435 0.535 0.635 0.735 0.835 0.935 1.035 1.135 [8.51] [11.05] [13.59] [16.13] [18.67] [21.21] [23.75] [26.29] [28.83] No. Coax 1 2 3 4 5 6 7 8 9 7 201 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors Part Numbering Guideline for Horizontal SMT 50 Ohm Coax Connectors Coax Only Connectors - SMT Termination CX XXX L2 XXX X Class/Type Jackscrew Threads CX Coax, 50 ohm Threads N Thread for 1.0 mm Jackscrews Positions Q Thread for 1.2 mm Jackscrews 010 1 Position 020 2 Position Mounting Hardware 030 3 Position A 1.2 mm x .160" 040 4 Position H 1.0 mm x .160" 050 5 Position 060 6 Position 070 7 Position Configuration 080 8 Position L2 Receptacle, Horizontal SMT 090 9 Position 202 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors 50 Ohm Coax with Mixed Signal Connectors D .100 [2.54] .075 [1.91] 2 Plcs. .205 [5.21] Plug .117 [2.97] B .078 [1.98] Typ. .038 2 Plcs. [.97] .118 [3.00] 2 Plcs. C .166 [4.22] Receptacle .050 [1.27] .100 [2.54] Pitch Product Facts n n n .100 [2.54] Metal Shell Standard Sizes: 1-9 coaxial contacts with 5 signal contacts Factory wired to your specifications Contact Tyco Electronics for custom configurations Plug Assembly Drawing Number 1589068 Plug Assembly, 1-9 Coax Only, 50 OHM, 5 Signals, Metal .223 [5.66] 1589068 NANONICS Coaxial Connectors n D .025 [.64] .112 [2.84] 2 Plcs. B B .078 [1.98] Typ. .038 [.97] 2 Plcs. 7 .166 [4.22] .118 [3.00] 2 Plcs. .025 [.64] .050 [1.27] .100 [2.54] Pitch C Receptacle Assembly Drawing Number 1589069 Size 1 2 3 4 5 6 7 8 9 B 0.254 0.354 0.454 0.554 0.654 0.754 0.854 0.954 1.054 [6.45] [8.99] [11.53] [14.07] [16.61] [19.15] [21.69] [24.23] [26.77] Dimensions C 0.335 [8.51] 0.435 [11.05] 0.535 [13.59] 0.635 [16.13] 0.735 [18.67] 0.835 [21.21] 0.935 [23.75] 1.035 [26.29] 1.135 [28.83] Receptacle Assembly, 1-9 Coax Only, 50 OHM, 5 Signals, Metal 1589069 D 0.180 0.280 0.380 0.480 0.580 0.680 0.780 0.880 0.980 [4.57] [7.11] [9.65] [12.19] [14.73] [17.27] [19.81] [22.35] [24.89] No. Coax 1 2 3 4 5 6 7 8 9 203 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors Part Numbering Guideline for 50 Ohm Coax with Mixed Signal Connectors Coax w/ Mixed Signal Connectors - Wire Terminations CX XXX XX 2 X R XXX X Class/Type Threads/Jackscrew CX Coax, 50 ohm Positions Threads (Receptacles Only) Jackscrews (Plugs Only) N Thread for 1.0 mm Jackscrews M 1.0 mm Non Captive Jackscrews Q Thread for 1.2 mm Jackscrews 015 1 Position w/ 5 Signals 025 2 Position w/ 5 Signals N 1.0 mm Captive Jackscrews Q 1.2 mm Captive Jackscrews Conductor Length 035 3 Position w/ 5 Signals 045 4 Position w/ 5 Signals 055 5 Position w/ 5 Signals XXX Three numbers only, length is in inches ( i.e. 012 = twelve inches) CXX A "C" follwed by two numbers, length is in centimeters ( i.e. C06 = 6 centimeters) MXX An "M" followed by two numbers, length is in meters ( i.e. M02 = 2 meters) 065 6 Position w/ 5 Signals 075 7 Position w/ 5 Signals 085 8 Position w/ 5 Signals Conductor Type (Signals) 095 9 Position w/ 5 Signals C Color Coded Teflon X White Teflon Configuration PC Plug Conductor Type (Coax) SC Receptacle R RE-178 Coaxial Cable Conductor Size 2 30 AWG 7 Strand 204 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors Part Number Index Cross Reference Nanonics Part Number Tyco Part Number Coax Only Nanonics Part Number Tyco Part Number Coax with Mixed Signals Nanonics Part Number Tyco Part Number Horizontal SMT Coax 0-1589070-1 CX015PC2RC012 0-1589068-1 CX010L2AQ 1-1589072-3 CX010PC2RG018N CX010PC2RG048Q CX010PC2RG072N CX010PC2RGC10Q CX010SC2RG048Q CX020PC2RG018N CX020PC2RG048N CX020PC2RG060N CX020SC2RG012N CX020SC2RG018N 0-1589070-2 2-1589070-8 0-1589070-3 2-1589070-1 2-1589071-3 0-1589070-4 2-1589070-5 1-1589070-8 2-1589071-0 2-1589071-5 CX015PC2RC012N CX015SC2RC012N CX035PC2RC006N CX035PC2RC018N CX035SC2RC006N CX035SC2RC018N CX045PC2RC006N CX045PC2RC036N CX045PC2RC036Q CX045SC2RC006N 0-1589068-5 0-1589069-1 0-1589068-2 0-1589068-3 0-1589069-2 0-1589069-3 0-1589068-4 0-1589068-9 1-1589068-0 0-1589069-4 CX010L2HN CX020L2HN CX030L23N CX030L23Q CX030L2HN CX040L2AQ CX040L2HN CX050L23Q CX050L2HN CX060L2AQ 0-1589072-1 1-1589072-2 0-1589072-2 0-1589072-5 0-1589072-3 1-1589072-0 1-1589072-6 0-1589072-6 0-1589072-9 1-1589072-1 CX020SC2RG024N CX020SC2RG024Q CX020SC2RG060N 0-1589071-8 2-1589071-8 2-1589071-2 CX045SC2RC006Q CX055PC2RC006N CX055SC2RC006N 0-1589069-7 0-1589068-6 0-1589069-5 CX060L2HN CX070L2AQ CX080L2HN 1-1589072-5 1-1589072-4 0-1589072-4 CX030PC2RG006N CX030PC2RG012 CX030PC2RG012N CX030PC2RG018N CX030PC2RG020Q CX030PC2RG048N CX030PC2RG060N CX030SC2RG006N CX030SC2RG012 CX030SC2RG012N CX030SC2RG060N CX040PC2RG012N CX040PC2RG030N CX040PC2RG039Q CX040PC2RG060N CX040SC2RG012 CX040SC2RG024N CX050PC2RG006N CX050SC2RG006N CX060PC2RG012N CX060PC2RG012Q CX060PC2RG018N CX060PC2RG036N CX060PC2RG072N CX060PC2RG144N CX060PC2RGC10Q CX060SC2RG012Q CX070PC2RGC10Q CX080PC2RG006N CX080PC2RG012N CX080PC2RG012Q CX080PC2RG018N CX080PC2RG024N CX080PC2RG036N CX080PC2RG048N CX080PC2RG060N CX080PC2RGC10N CX080SC2RG012N CX080SC2RG012Q CX080SC2RG015N CX080SC2RG024N CX090PC2RG036N CX090SC2RG036N 0-1589070-5 0-1589070-6 0-1589070-7 0-1589070-8 0-1589070-9 2-1589070-4 2-1589070-6 0-1589071-3 0-1589071-4 1-1589071-8 2-1589071-1 1-1589070-0 1-1589070-1 3-1589070-7 1-1589070-7 0-1589071-5 0-1589071-7 1-1589070-4 1-1589071-9 3-1589070-8 3-1589070-3 3-1589070-5 3-1589070-0 3-1589070-1 3-1589070-2 2-1589070-0 2-1589071-6 2-1589070-3 2-1589070-2 3-1589070-9 3-1589070-4 3-1589070-6 2-1589070-9 1-1589070-5 1-1589070-6 1-1589070-9 2-1589070-7 2-1589071-4 2-1589071-7 1-1589071-7 0-1589071-9 1-1589070-2 0-1589071-6 CX095PC2RC006N CX095PC2RC036N CX095SC2RC006N 0-1589068-7 0-1589068-8 0-1589069-6 NANONICS Coaxial Connectors CX010PC2RG006N 7 205 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Coaxial Connectors Engineering Notes 206 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Strip Connectors Strip Connectors The Nanonics strip connectors are the smallest connectors in the Nanonics product line. They are molded from LCP and are ideal for applications where the height and weight of the connector is a serious design parameter. Just .040" in height, these Polarization connectors are well suited for low-profile applications. Standard sizes are 4, 9, and 15, while 25, 37, and 51 are also available upon request. Standard configurations include wired, surface mount, or thru-hole terminations. Guide pins are available for polarization. Harness assemblies and custom configurations can also be accommodated. NANONICS Strip Connectors Polarization of the strips is accomplished with the use of optional polarizing guide posts. Polarization Position "T" Shown 8 207 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Strip Connectors Wired Connectors -- Unshrouded, Flying Leads Product Facts n n n n Plastic Shell Standard Sizes: 4, 9, 15, 25, 37 and 51 Factory wired to your specifications Contact Tyco Electronics for custom configurations .111 [2.82] .205 [5.21] .060 [1.52] Typ. L L Position 1 .040 [1.02] Position 1 .040 [1.02] C C Receptacle Assembly Drawing Number 1589449 Plug Assembly Drawing Number 1589448 Plug Assembly, Unshrouded Strip, Flying Leads, Plastic Receptacle Assembly, Unshrouded Strip, Flying Leads, Plastic 1589449 1589448 Size 4 9 15 25 37 51 Dimensions C 0.115 [2.92] 0.240 [6.10] 0.390 [9.91] 0.640 [16.26] 0.940 [23.88] 1.290 [32.77] L 0.075 [1.91] 0.200 [5.08] 0.350 [8.89] 0.600 [15.24] 0.900 [22.86] 1.250 [31.75] 208 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Strip Connectors Part Numbering Guideline for Strip Wired Connectors Strip Connectors - Wire Terminations USS XXX XX X XX XXX Class/Row/Type X Polarization (optional) USS Unshrouded, 1 row, strip Plug contains guide post Receptacle accepts guide post Positions 004 4 Position 009 9 Position Conductor Length 015 15 Position XXX 025 25 Position Three numbers only, length is in inches ( i.e. 012 = twelve inches) CXX A "C" followed by two numbers, length is in centimeters ( i.e. C06 = 6 centimeters) MXX An "M" followed by two numbers, length is in meters ( i.e. M02 = 2 meters) Configuration PC Plug Conductor Type SC Receptacle DX White Teflon DY White PTFE per M16878/6 DC Color Coded Teflon DM Color Coded Teflon per MIL-STD-681 DT White Tefzel per M22759/33 Conductor Size/Strands 0 28 AWG Solid 1 30 AWG Solid 2 30 AWG 7 Strand 3 32 AWG 7 Strand 4 34 AWG 7 Strand Polarization (Strip Type Only) T = One Pin vjjjjjjjj U = One Pin jvjjjjjjj V = One Pin jjvjjjjjj W = Two Pin vjjjjjjvj Y = Two Pin vjjjjjvjj Z = Two Pin jvjjjjvjj NANONICS Strip Connectors 8 209 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Strip Connectors Surface Mount Connectors -- Unshrouded Product Facts n n n n n A Plastic Shell Standard Sizes: 4, 9, 15, 25, 37 and 51 Factory wired to your specifications Contact Tyco Electronics for custom configurations Suggested Pad Layouts are available on the referenced drawings on the Tyco Electronics website .025 [.64] Pitch .020 Typ. [.51] .255 [6.48] Typ. .205 [5.21] L Position 1 .040 [1.02] C Plug Assembly Drawing Number 1589451 Plug Assembly, Unshrouded Strip, Horizontal SMT, Plastic 1589451 A .020 [.51] Typ. .025 [.64] Pitch .161 [4.09] Typ. .111 [2.82] .060 [1.52] Typ. L Position 1 .040 [1.02] C Receptacle Assembly Drawing Number 1589452 Receptacle Assembly, Unshrouded Strip, Horizontal SMT, Plastic 1589452 Size 4 9 15 25 37 51 A 0.0375 0.1000 0.1750 0.3000 0.4500 0.6250 [.95] [2.54] [4.45] [7.62] [11.43] [15.88] Dimensions C 0.115 [2.92] 0.240 [6.10] 0.390 [9.91] 0.640 [16.26] 0.940 [23.88] 1.290 [32.77] L 0.075 [1.91] 0.200 [5.08] 0.350 [8.89] 0.600 [15.24] 0.900 [22.86] 1.250 [31.75] 210 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Strip Connectors Thru-Hole Connectors -- Unshrouded, Horizontal, 1 Row to 2 Row, .050 Spacing Product Facts n n n n n .050 [1.27] Typ. Plastic Shell Standard Sizes: 4, 9, 15, 25, 37 and 51 Factory wired to your specifications Contact Tyco Electronics for custom configurations Suggested Thru-Hole Layouts are available on the referenced drawings on the Tyco Electronics website .255 [1.27] Typ. .205 [5.21] L .090 [2.29] Typ. .040 [1.02] Position 1 C Plug Assembly Drawing Number 1589453 Plug Assembly, Unshrouded Strip, Horizontal Mount, Through Hole, 1 to 2 Row, .050 Spacing 1589453 .050 [1.27] Typ. .161 Typ. [4.09] .060 [1.52] Typ. .111 [2.82] NANONICS Strip Connectors L Position 1 .090 [2.29] Typ. .040 [1.02] C Receptacle Assembly Receptacle Assembly, Unshrouded Strip, Drawing Number 1589454 Horizontal Mount, Through Hole, 1 to 2 Row, .050 Spacing Size 4 9 15 25 37 51 Dimensions C 0.115 [2.92] 0.240 [6.10] 0.390 [9.91] 0.640 [16.26] 0.940 [23.88] 1.290 [32.77] 8 1589454 L 0.075 [1.91] 0.200 [5.08] 0.350 [8.89] 0.600 [15.24] 0.900 [22.86] 1.250 [31.75] 211 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Strip Connectors Part Numbering Guideline for Surface Mount and Thru Hole Termination Strip Connectors - Surface Mount and Thru Hole Terminations USS XXX XX Class/Row/Type X Polarization (optional) USS Unshrouded, 1 row, strip Plug contains guide post Receptacle accepts guide post Positions 004 4 Position 009 9 Position Configuration 015 15 Position B2 Plug, Horizontal SMT 025 25 Position L2 Receptacle, Horizontal SMT C6 Plug, Horizontal Mount, Thru Hole M6 Receptacle, Horizontal Mount, Thru Hole Polarization (Strip Type Only) T = One Pin vjjjjjjjj U = One Pin jvjjjjjjj V = One Pin jjvjjjjjj W = Two Pin vjjjjjjvj Y = Two Pin vjjjjjvjj Z = Two Pin jvjjjjvjj 212 Catalog 1308885 Issued 3-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Strip Connectors Part Number Index Cross Reference Nanonics Part Number Tyco Part Number Nanonics Part Number Tyco Part Number Nanonics Part Number Tyco Part Number Nanonics Part Number 0-1589448-1 USS004PC2DC006 USS004PC2DC006T USS004PC2DC008 USS004PC2DC012 USS004PC2DC012T USS004PC2DC012U USS004PC2DC024 USS004PC2DC036 USS004PC2DC036T USS004PC2DCC20T 0-1589448-2 5-1589448-5 6-1589448-8 0-1589448-3 0-1589448-4 0-1589448-5 0-1589448-6 0-1589448-7 0-1589448-8 5-1589448-9 USS004SC3DC018 USS004SC3DX004T USS004SC4DXC30 1-1589449-8 1-1589449-9 8-1589449-2 USS009SC3DC036 USS009SC3DX004T USS015PC1DC036T 7-1589449-6 4-1589449-4 7-1589448-3 Surface Mount USS004PC2DC003 USS009PC0DC006T USS009PC2DC006 USS009PC2DC006W USS009PC2DC008U USS009PC2DC012 USS009PC2DC012T USS009PC2DC012V USS009PC2DC018V USS009PC2DC024 1-1589448-6 1-1589448-7 1-1589448-8 5-1589448-2 1-1589448-9 2-1589448-0 2-1589448-1 2-1589448-2 2-1589448-3 USS015PC1DC036W USS015PC2DC006 USS015PC2DC012 USS015PC2DC012T USS015PC2DC012V USS015PC2DC018 USS015PC2DC018V USS015PC2DMC60T USS015PC2DX004T USS004PC2DCC30 USS004PC2DCM01 USS004PC2DM012T 0-1589448-9 5-1589448-7 7-1589448-2 USS009PC2DC036 USS009PC2DC036T USS009PC2DC036U 2-1589448-4 2-1589448-5 2-1589448-6 USS004PC2DM024T USS004PC2DMC30 USS004PC2DMC40 USS004PC2DMC50 USS004PC2DMM01 USS004PC2DMM02 USS004PC2DNC40 USS004PC2DX006 USS004PC2DX012 USS004PC2GX006 USS004PC2GX024 USS004PC3DC018 USS004PC4DXC10 USS004SC2DC002 USS004SC2DC003 USS004SC2DC003T USS004SC2DC004 USS004SC2DC006 USS004SC2DC006T USS004SC2DC008 USS004SC2DC012 USS004SC2DC012T USS004SC2DC012U USS004SC2DC024 USS004SC2DC036 USS004SC2DC048 USS004SC2DCC20T USS004SC2DCC30 USS004SC2DCM01 USS004SC2DM012T USS004SC2DM024T USS004SC2DMC30 USS004SC2DMC40 USS004SC2DMC50 USS004SC2DMM01 USS004SC2DMM02 USS004SC2DNC40 USS004SC2DTC20T USS004SC2DX006 USS004SC2DX012T USS004SC2GX006 USS004SC2GX024 7-1589448-6 6-1589448-9 7-1589448-1 6-1589448-7 6-1589448-0 6-1589448-1 1-1589448-0 1-1589448-1 1-1589448-2 1-1589448-3 1-1589448-4 1-1589448-5 7-1589448-0 0-1589449-1 0-1589449-2 0-1589449-3 0-1589449-4 0-1589449-5 6-1589449-2 8-1589449-0 0-1589449-6 0-1589449-7 0-1589449-8 0-1589449-9 1-1589449-0 1-1589449-1 7-1589449-1 1-1589449-2 6-1589449-7 8-1589449-4 8-1589449-9 8-1589449-1 8-1589449-3 7-1589449-9 7-1589449-2 7-1589449-3 1-1589449-3 8-1589449-5 1-1589449-4 1-1589449-5 1-1589449-6 1-1589449-7 USS009PC2DC036V USS009PC2DCC05T USS009PC2DCM01 USS009PC2DM012T USS009PC2DM024T USS009PC2DX001 USS009PC2DX004T USS009PC2DX006T USS009PC2DX012 USS009PC2GX006 USS009PC2GX012 USS009PC3DC036 USS009SC0DC006T USS009SC2DC004 USS009SC2DC006 USS009SC2DC006W USS009SC2DC006Z USS009SC2DC008 USS009SC2DC012 USS009SC2DC012T USS009SC2DC012Z USS009SC2DC018 USS009SC2DC018T USS009SC2DC018V USS009SC2DC024 USS009SC2DC025T USS009SC2DC036T USS009SC2DC036U USS009SC2DC036V USS009SC2DC036W USS009SC2DC060T USS009SC2DCC05T USS009SC2DCM01 USS009SC2DCM01T USS009SC2DM012T USS009SC2DM024T USS009SC2DT012T USS009SC2DX004T USS009SC2DX006T USS009SC2DX012 USS009SC2GX006 USS009SC2GX012 2-1589448-7 2-1589448-8 5-1589448-8 7-1589448-5 7-1589448-7 2-1589448-9 Wire Terminations 3-1589448-0 3-1589448-1 3-1589448-2 3-1589448-3 USS004B2 0-1589451-1 7-1589448-4 3-1589448-5 3-1589448-6 3-1589448-7 3-1589448-8 3-1589448-9 5-1589448-6 4-1589448-0 4-1589448-1 USS004B2T USS004B4 USS004B45T USS004B4T USS004L2 USS004L2T USS009B2 USS009B2T USS009B2TE USS009B2Z 0-1589451-2 0-1589775-1 0-1589450-1 3-1589683-2 0-1589452-1 0-1589452-2 0-1589451-3 0-1589451-5 1-1589451-5 0-1589451-6 USS015PC2DX012 USS015PC2DX024T USS015PC3DC036 4-1589448-2 4-1589448-3 6-1589448-6 USS009B43T USS009B4T USS009L2 5-1589683-6 5-1589683-7 0-1589452-3 USS015SC1DC036T USS015SC1DC036W USS015SC2DC006 USS015SC2DC012 USS015SC2DC012T USS015SC2DC018V USS015SC2DC024T USS015SC2DC036 USS015SC2DC036T USS015SC2DMC60T USS015SC2DX004T USS015SC2DX006T USS015SC2DX018T USS015SC3DC036 USS015SC3DX004T USS025PC2DC006 USS025PC2DC012 USS025PC2DT006T USS025PC2DX018T USS025SC2DC006 USS025SC2DC012 USS025SC2DT006T USS037PC1DXC20 USS037PC2DC006 USS037PC2DC012 USS037PC2DC020T USS037PC2DNC50 USS037PC2DT006T USS037SC1DXC20 USS037SC1DY006 USS037SC2DC006 USS037SC2DC012 USS037SC2DC036T USS037SC2DT006T USS037SC2DX006T USS051PC2DC012 USS051PC2DX012 USS051SC2DC012 8-1589449-6 8-1589449-7 4-1589449-6 4-1589449-7 4-1589449-8 6-1589449-4 USS009L2T USS009L2U USS009L2V USS015B2 USS015B2T USS015B4T USS015L2 USS015L2T USS015L2V USS025B2 USS025B4T USS025L2 USS025L4T USS037B2 USS037B2T USS037L2 USS037L2T USS051B2 USS051L2 0-1589452-4 0-1589452-5 0-1589452-6 0-1589451-8 0-1589451-9 7-1589683-6 0-1589452-7 0-1589452-8 0-1589452-9 1-1589451-0 8-1589683-6 1-1589452-0 8-1589683-7 1-1589451-1 1-1589451-4 1-1589452-1 1-1589452-2 1-1589451-3 1-1589452-3 6-1589449-1 7-1589449-8 4-1589449-9 5-1589449-0 5-1589449-1 6-1589449-5 5-1589449-2 7-1589449-7 5-1589449-3 4-1589448-4 6-1589448-2 5-1589448-3 4-1589448-5 5-1589449-4 7-1589449-4 5-1589449-9 4-1589448-6 4-1589448-7 6-1589448-4 4-1589448-8 4-1589448-9 5-1589448-4 5-1589449-5 6-1589449-6 5-1589449-6 7-1589449-5 6-1589449-9 6-1589449-0 5-1589449-7 5-1589448-0 5-1589448-1 5-1589449-8 Thru-Hole USS004C6 USS004C6T USS004M6 USS009C6 USS009C6T USS009C6V USS009M6 USS015C6 0-1589453-1 0-1589453-6 0-1589454-1 0-1589453-2 0-1589453-3 0-1589453-4 0-1589454-2 0-1589453-5 NANONICS Strip Connectors 3-1589448-4 6-1589448-5 7-1589449-0 2-1589449-0 2-1589449-1 2-1589449-2 2-1589449-3 2-1589449-4 2-1589449-5 2-1589449-6 2-1589449-7 2-1589449-8 2-1589449-9 6-1589449-3 3-1589449-0 3-1589449-1 3-1589449-2 3-1589449-3 3-1589449-4 3-1589449-5 3-1589449-6 3-1589449-7 6-1589449-8 3-1589449-8 8-1589449-8 9-1589449-0 9-1589449-1 3-1589449-9 4-1589449-0 4-1589449-1 4-1589449-2 4-1589449-3 Tyco Part Number 8 213 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Strip Connectors Engineering Notes 214 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 MICRONOT and NANONICS Connectors Part Number Index Note: This index lists all cataloged parts by base no. only. Complete part nos. (with prefixes and/or suffixes) are shown on the page(s) indicated. Page 160 Part No. 010-3008-0000 Page 81 Part No. 031-0095-0001 Page 99, 101, 131 1589490 151 010-3009-0000 81 031-0098-0001 106 1589685 192 010-3010-0000 81 031-0125-0001 97 Page 157 1589686 188 031-0001-0001 93 031-0318-0001 97 1589687 192 031-0001-0001 97 031-0450-0001 97 1589050 168 1589688 188 031-0001-0003 93, 97 031-0459-0001 97 1589051 164 1589690 185 031-0002-0001 93, 97 031-0467-0001 96 1589052 164 1589691 182 031-0003-0001 93, 97 032-0002-0001 103, 104, 132 1589053 165 1589692 182 031-0004-0001 103, 105 032-0010-0001 93, 94, 129 1589054 165 1589693 183 031-0005-0001 103, 105 032-0011-0001 93, 94, 129 1589055 180 1589694 189 031-0006-0001 93, 98, 103, 105 032-0012-0001 103, 104, 132 1589056 184 1589695 193 031-0017-0001 93, 97 032-0013-0001 93, 95, 130 1589057 180 1589735 145 031-0018-0001 93, 97 032-0014-0001 93, 95, 130 1589058 184 1589736 145 031-0019-0001 93, 98 032-0015-0001 93, 95, 130 1589059 181 1589737 147 031-0020-0001 103, 105 032-0016-0001 103, 104, 132 1589060 190 1589738 147 031-0021-0001 103, 105 032-0017-0001 93, 94, 129 1589061 190 1589803 146 031-0024-0001 93, 97 032-0020-0001 103, 132 1589062 191 1589804 148 031-0032-0001 93, 96, 130 032-0021-0001 93, 94, 129 1589063 186 1589851 167 031-0033-0001 93, 96, 130 032-0022-0001 93, 94, 129 1589064 186 1589449 208 031-0034-0001 93, 96 032-0023-0001 93, 94, 129 1589065 187 010-0003-000 94 031-0036-0001 93, 96, 130 032-0025-0001 93, 94, 129 1589066 162 010-0003-0000 96 031-0037-0001 93, 96, 130 032-0026-0001 103, 104, 132 1589067 163 010-0004-000 94 031-0038-0001 103, 105, 132 032-0027-0001 103, 104, 132 1589068 203 010-0004-0000 96 031-0040-0001 103, 105, 132 032-0030-0001 103, 104, 132 1589069 203 010-0005-000 94 031-0046-0001 93, 98 032-0031-0001 103, 104, 132 1589070 199 010-0005-0000 96 031-0048-0001 93, 96, 130 032-0032-0001 103, 104, 132 1589071 199 010-0007-0000 100, 104,105 031-0049-0001 99, 102 032-0033-0001 93, 94, 129 1589072 201 010-0007-0009 101 031-0050-0001 93, 97 032-0034-0001 130 1589448 208 010-0008-0000 104 031-0051-0001 93, 97 032-0042-0001 99, 100 1589451 210 010-0016-0000 95, 101,104 031-0052-0001 93, 98 032-0055-0001 99, 100, 131 1589452 210 010-0017-0000 95, 101,104 031-0053-0001 99, 101, 131 032-0056-0001 99, 100, 131 1589453 211 010-0031-0000 106 031-0054-0001 99, 101, 131 032-0058-0001 99, 100, 131 1589454 211 010-0035-000 94 031-0057-0001 103,105 032-0059-0001 99, 101, 131 1589455 142 010-0036-0000 100,101,104 031-0058-0001 103,105 032-0060-0001 99, 100, 131 1589457 142 010-0044-000 94 031-0059-0001 93, 97 032-0061-0001 99, 100, 131 1589460 150 010-0065-0000 116 031-0060-0001 99,102 032-0062-0001 99, 101, 131 1589461 159 010-0072-0000 81 031-0061-0001 93, 97 032-0063-0001 99, 101, 131 1589462 150 010-0075-0000 81 031-0062-0001 93, 97 032-0066-0001 93, 94, 129 1589463 142 010-0081-0000 116, 126 031-0063-0001 99, 101,131 032-0067-0001 93, 94, 129 1589464 153 010-0082-0000 116 031-0064-0001 99, 101,131 032-0068-0001 93, 95, 130 1589465 152 010-0083-0000 116 031-0065-0001 99,102 032-0071-0001 93, 94, 129 1589466 153 010-0087-0000 81 031-0067-0001 93, 98 032-0072-0001 103, 104, 105, 132 1589467 154 010-0132-0000 81, 123 031-0069-0001 93, 97 032-0077-0001 1589470 159 010-0150-0000 123 031-0070-0001 99,102 032-0078-0001 93, 94, 129 1589471 157 010-0161-0000 123 031-0072-0001 93, 97 032-0079-0001 103, 104, 132 1589472 143 010-0169-0000 81 031-0073-0001 93, 98 032-0083-0001 99, 101, 131 1589476 143 010-0172-0000 106 031-0080-0001 93, 98 032-0084-0001 99, 100, 131 1589481 158 010-0186-0000 106 031-0085-0001 103, 105 032-0087-0001 99, 131 1589482 160 010-0190-0000 81 031-0087-0001 100 032-0088-0001 106, 132 1589483 150 010-1004-0000 126 031-0088-0001 93, 96, 130 032-0092-0001 93, 94, 129 1589484 155 010-1008-0000 100, 101 031-0089-0001 93, 96, 130 032-0093-0001 106, 132 1589485 155 010-1009-0000 105 031-0090-0001 93, 96, 130 032-0097-0001 93, 94, 129 1589486 156 010-3002-0000 81 031-0093-0001 99, 101, 131 032-0098-0001 93, 94, 129 1589487 158 010-3007-0000 81 031-0094-0001 99, 101, 131 032-0099-0001 93, 94, 129 Part No. 1579469 Part No. 1589488 99, 100, 131 215 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 MICRONOT and NANONICS Connectors Part Number Index (Continued) Part No. 032-0153-0001 Page 93, 95, 130 Part No. 033-0153-0001 Page 111 Part No. 053-0228-0001 Page 135 Part No. 086-0058-0000 Page 63, 80 032-0155-0001 93, 94, 129 051-0049-0001 135 053-0230-0001 107 086-0059-0000 63, 80 032-0156-0001 93, 94, 129 051-0056-0001 135 053-0249-0001 107 086-0060-0000 63, 80 032-0222-0001 93, 94, 129 051-0125-0001 93 053-0250-0001 107 086-0061-0000 63, 80 033-0001-0001 110 051-0134-0001 136 053-0251-0001 107 086-0062-0000 63, 80 033-0023-0001 110 051-0154-0001 136 053-0265-0001 107 086-0063-0000 63, 80 033-0036-0001 110 051-0158-0001 136 053-0267-0003 107 086-0073-00P1 63 033-0042 108 051-0232-0001 135 053-0294-0002 107 086-0073-00W3 72 033-0043 108 051-0248-0001 106 053-0339-0001 111 086-0074-00P1 63 033-0044 108 051-0249-0001 136 053-0354-0003 107 086-0074-00W3 72 033-0046-0001 109 051-0258-0001 99 053-0388-0001 107 086-0075-00P1 63 033-0047-0001 109 051-0258-0001 102 053-0412-0001 135 086-0075-00W3 72 033-0048-0001 109 051-0315-0001 135 053-0455-0001 136 086-0076-00P1 63 033-0053-0001 110 051-0318-0001 93 053-0495-0001 107 086-0076-00P2 72 033-0054-0001 110 051-0325-0001 99, 102 053-0636-0001 136 086-0077-00P1 63 033-0055-0001 110 051-0358-0001 106, 132 053-0656-0001 107 086-0077-00P2 72 033-0056-0001 109 051-0389-0001 106, 132 082-0009-0000 73 086-0078-00P1 63 033-0057-0001 109 051-0450-0001 93 082-0010-0000 73 086-0078-00P2 72 033-0058-0001 109 051-0459-0001 93 082-0113-00T1 63, 73 086-0099-00F5 73 033-0067-0001 109 051-0467-0001 93, 130 082-0132-00T1 63 086-0099-00X1 63 033-0068-0001 109 051-0586-0001 103, 105 082-0462-00Y9 73 086-0100-00F5 73 033-0069-0001 109 051-0618-0001 107 082-0464-00Y9 63, 73 086-0100-00X1 63 033-0081-0001 111 052-0061-0001 99, 100 082-0466-00Y9 79 086-0101-00F5 73 033-0082-0001 111 052-0092-0001 93, 94, 129 083-0009-00R4 63, 73 086-0101-00X1 63 033-0084-0001 109 052-0130-0001 107, 133 083-0158-00R4 63, 73 086-0103-00F5 73 033-0090-0001 111 052-0138-0001 107, 133 083-0173-00R4 63, 78 086-0103-00X1 63 033-0092-0001 111 052-0200-0001 93, 94, 129 083-1200-00R4 73 086-0104-00F5 73 033-0093-0001 111 052-0204-0001 93, 95, 130 084-0024-00T2 63 086-0104-00X1 63 033-0094-0001 111 052-0207-0001 93, 95, 130 084-0025-00T2 63 086-0105-00F5 73 033-0097-0001 111 052-0213-0001 93, 94, 129 084-0026-00T2 63, 79 086-0105-00X1 63 033-0098-0001 111 052-0215-0001 93, 95, 130 084-0027-00T2 63 086-0139-00W3 72 033-0101-0001 110 052-0228-0001 103, 104, 105, 132 084-0028-00T2 63 086-0140-00P2 72 033-0102-0001 110 052-0229-0001 106, 132 084-0029-00T2 63 086-0142-00F5 73 033-0103-0001 110 052-0235-0001 93, 94, 129 086-0001-0000 63, 80 086-0143-00F5 73 033-0104-0001 110 052-0235-0003 93, 94, 129 086-0009-0000 80 086-0146-00AL 72 033-0105-0001 110 052-0298-0001 93, 95, 130 086-0010-0000 80 086-0147-00L6 72 033-0106-0001 110 052-0299-0001 93, 95, 130 086-0014-0000 63, 80 086-0148-0000 73, 80 033-0107-0001 110 052-0304-0022 93, 95, 130 086-0015-0000 63, 80 086-0175-00F3 73 033-0109-0001 110 052-0324-0001 106, 132 086-0049-00AL 72 086-0175-00N1 77 033-0110-0001 110 052-0337-0001 93, 95, 130 086-0049-00J2 63 086-0176-00F3 73 033-0111-0001 110 052-0370-0001 93, 94, 129 086-0050-00AL 72 086-0176-00N1 77 033-0112-0001 110 052-0379-0001 93, 95, 130 086-0050-00J2 63 086-0177-00F3 73 033-0115-0002 107 052-0471-0001 99, 100 086-0051-00AL 72 086-0177-00N1 77 033-0116-0001 107 052-0542-0001 93, 94, 129 086-0051-00J2 63 086-0178-00F3 73 033-0117-0001 107 052-0593-0001 107, 133 086-0052-00J2 63 086-0178-00N1 77 033-0124-0001 111 053-0020-0003 107 086-0052-00L6 72 086-0179-00F3 73 033-0125-0001 111 053-0021-0003 107 086-0053-00J2 63 086-0179-00N1 77 033-0126-0001 111 053-0022-0003 107 086-0053-00L6 72 086-0180-00F3 73 033-0127-0001 110 053-0028-0001 135 086-0054-00J2 63 086-0180-00N1 77 033-0129-0001 110 053-0108-0001 110 086-0054-00L6 72 086-0181-00F3 73 033-0141-0001 111 053-0154-0001 107 086-0055-0000 63, 73 086-0181-00N1 77 033-0143-0001 111 053-0155-0001 107 086-0056-0000 63, 73 086-0182-00F3 73 033-0145-0001 111 053-0161-0001 107 086-0056-0000 80 086-0182-00N1 77 033-0147-0001 109 053-0227-0001 135 086-0057-0000 63, 80 086-0251-0000 80 216 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 MICRONOT and NANONICS Connectors Part Number Index (Continued) 086-0253-00P2 77 Part No. 131-0202-0002 Page 116 Part No. 132-0303-0002 Page 114, 133 Part No. 143-0030-0001 Page 125 086-0254-00P2 77 131-0300-0001 115, 134 132-0509-0002 113, 133 143-0031-0000 125 086-0255-00P2 77 131-0301-0001 115, 134 141-0000-0001 118 143-0032-0001 124 086-0256-00P2 77 131-0303-0002 116 141-0001-0001 118 143-1000-0001 124 086-0257-00L6 77 131-0304-0001 116 141-0002-0001 118 143-1001-0001 125 086-0258-00L6 77 131-0705-0001 116 141-0002-0002 118 143-1002-0001 125 086-0259-00L6 77 131-0904-0001 116 141-0003-0001 118 143-1003-0001 125 086-0260-00L6 77 132-0112-000 133 141-0003-0002 118 144-0001-0001 126 086-0261-00F5 77 132-0112-0001 113 141-0004-0001 119 145-0002-0001 126 086-0262-00F5 77 132-0112-0002 113 141-0010-0001 119 145-0003-0001 126 086-0263-00F5 77 132-0112-0003 113 141-0011-0001 121 1466018-1 15 086-0264-00F5 77 132-0112-0004 113 141-0011-0002 121 1495164-1 15 086-0265-00L6 77 132-0113-000 133 141-0012-0001 121 3-1532030-3 78 086-0266-00L6 77 132-0113-0001 113 141-0012-0002 121 3-1532030-4 78 086-0267-00L6 77 132-0113-0002 113 141-0013-0001 119 4-1532036-8 78 086-0268-00L6 77 132-0113-0003 113 141-0014-0001 121 4-1532137-3 15 086-0330-0000 86 132-0113-0004 113 141-0015-0001 121 5-1532030-6 78 086-0331-0000 86 132-0114-000 133 141-0017-0001 121 5-1532030-7 79 086-0337-00N1 85 132-0114-0001 113 141-0019-0001 119 5-1532129-7 79 086-0338-00N1 85 132-0114-0002 113 141-0020-0001 121 5-1532129-8 79 086-0339-00N1 85 132-0114-0003 113 141-0023-0001 121, 123 5-1532129-9 79 086-0340-00N1 85 132-0114-0004 113 141-1000-0001 122 5-1532137-5 14 086-0341-00N1 85 132-0115-000 133 141-1001-0001 122 5-1532137-6 14 086-0342-00N1 85 132-0115-0001 113 141-1001-0001 123 5-1532137-7 14 086-0343-00N1 85 132-0115-0002 113 141-1002-0001 122 5-1532137-8 14 086-0344-00N1 85 132-0115-0003 113 141-1002-0002 122 5-1532137-9 14 096-0001-0000 15 132-0115-0004 113 141-1003-0001 123 5-1532155-0 79 096-0002-0008 15 132-0116-0002 114, 133 141-1003-0002 123 5-1532168-1 79 096-0002-0009 14 132-0117-0002 114, 133 141-1004-0001 123 6-1532030-1 78 096-0002-0010 14 132-0118-0002 114, 133 141-1005-0001 123 6-1532137-0 14 096-0002-0011 14 132-0119-0002 114, 133 141-1012-0001 123 6-1532137-1 14 096-0002-0013 15 132-0200-000 133 141-1500-0001 63, 79 6-1532137-2 14 096-0002-0014 14 132-0200-0001 113 142-0000-0001 118 6-1532137-3 14 096-0002-0015 14 132-0200-0002 113 142-0000-0002 118 6-1532137-4 14 096-0002-0060 14 132-0200-0003 113 142-0000-0003 118 7-1532037-3 78 096-0002-0061 14 132-0200-0004 113 142-0002-0001 118 8-1532030-1 78 096-0002-0062 14 132-0201-000 133 142-0002-0002 118 A43 59 096-0002-0064 14 132-0201-0001 113 142-0002-0003 118 B43 59 096-0002-0065 14 132-0201-0002 113 142-0005-0001 120 C43 59 096-0526-0000 86 132-0201-0003 113 142-0005-0002 120 Circular Connectors 096-0626-0001 86 132-0201-0004 113 142-0005-0003 120 Coax Only Wire Terminations 200 131-0134-0001 115, 134 132-0202-0002 114, 133 142-0010-0001 120 Coax SMT Termination 202 131-0135-0001 115, 134 132-0203-0002 114, 133 142-0010-0002 120 Coax w/Mixed Signal 204 131-0136-0001 115, 134 132-0300-000 133 142-0010-0003 120 131-0137-0001 115, 134 132-0300-0001 114 142-1000-0001 122 DUALOBE Jumper Terminations 149 DUALOBE Panel Mount Connectors 169 Part No. Page 194 131-0138-0002 116 132-0300-0002 114 142-1002-0001 122 131-0139-0002 116 132-0300-0003 114 142-1021-0001 122 131-0140-0001 116 132-0300-0004 114 142-1500-0001 63, 79 131-0141-0002 116 132-0301-000 133 143-0001-0001 124 131-0142-0002 116 132-0301-0001 114 143-0002-0001 124 DUALOBE Solder Cup Termination 131-0150-0001 115 132-0301-0002 114 143-0003-0001 124 DUALOBE Wire Terminations 144 131-0151-0001 115 132-0301-0003 114 143-0004-0001 125 131-0200-0001 115, 134 132-0301-0004 114 143-0005-0001 119 Flex Termination Duckbill Connectors 124 HDSM 131-0201-0001 115, 134 132-0302-0002 114, 133 143-0029-0001 DUALOBE SMT & Thru-Hole Terminations 161 166 163 54 217 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 MICRONOT and NANONICS Connectors Part Number Index (Continued) Part No. MCD Page 7 MCD**- 11, 12 MCDM 25 MCDM1 26 MCDM3 28 MCDR3 32, 33, 34 MCE 41 MCEM 42 MCEM1 MCJ MCJM MCK 44 46, 47 48, 49 7, 16, 19 MCK-** 9, 17, 20, 23, 31, 32, 34, 35 MCS MD53 MD53-00E 50 67, 68 70 MD53-01E 70 MD53-02E 71 MD53-06E 69 MD53-12E 71 MD53-16E 69 MD63-* 75 MD63-00E 76 MD63-01E 76 MD63-02E 76 MD73-* 83 MD73-00E 84 MD73-01E 85 MD73-02E 84 MD73-06E 84 MQR-* 87 MTC-* 89 S96-0002-0009 14 S96-0002-0060 14 S96-0002-0084 14 S96-0002-0085 14 S96-0002-0086 14 S96-0002-0087 14 S96-0002-0088 14 S96-0002-0089 14 S96-0002-0090 14 S96-0002-0091 14 Strip Connectors 209 Strip Connectors, SMT & ThruHole 212 T53-* 72 218 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 MICRONOT and NANONICS Connectors Engineering Notes 219 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 MICRONOT and NANONICS Connectors Engineering Notes 220 Catalog 1308638 Revised 8-05 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967 Global Contacts Americas Argentina - Buenos Aires Phone: +54-11-4733-2200 Fax: +54-11-4733-2211 Brasil - Sao Paulo Phone: +55-11-3611-1311 Fax: +55-11-3611-0397 Canada - Markham Phone: +905-475-6222 Fax: +905-474-5520 Product Information Center: (Technical Support) Phone: +905-470-4425 Fax: +905-474-5525 Colombia - Bogota Phone: +57-1-231-9398 Fax: +57-1-660-0206 Mexico - Mexico City Phone: +52-5-729-0400 Fax: +52-5-361-8545 For Latin/South American Countries not shown Phone: +54-11-4733-2015 Fax: +54-11-4733-2083 United States - Harrisburg, PA Phone: +717-564-0100 Fax: +717-986-7575 Product Information Center: (Technical Support) Phone: +800-522-6752 Fax: +717-986-7575 Asia/ Pacific Australia - Sydney Phone: +61-2-9554-2600 Fax: +61-2-9502-2556 Product Information Center: (Technical Support) Phone: +61-2-9840-8200 Fax: +61-2-9634-6188 India - Bangalore Phone: +91-80-285-40800 Fax: +91-80-285-40820 Indonesia - Jakarta Phone: +65-6482-0311 Fax: +65-6482-1012 Japan - Toyko Phone: +81-44-844-8111 Fax: +81-44-812-3207 Product Information Center: (Technical Support) Phone: +81-44-844-8013 Fax: +81-44-812-3200 Raychem Products +81-44-900-5102 Phone: Fax: +81-44-5025-5027 Korea - Seoul Phone: +82-2-3415-4500 Fax: +82-2-3486-3810 Malaysia - Kuala Lumpur Phone: +60-3-78053055 Fax: +60-3-78053066 New Zealand - Auckland Phone: +64-9-634-4580 Fax: +64-9-634-4586 Philippines - Makati City Phone: +632-848-0171 Fax: +632-867-8661 People's Republic of China Hong Kong Phone: +852-2735-1628 Fax: +852-2735-0243 Shanghai Phone: Fax: +86-21-53838188/64850602 +86-21-53838018/54260180 Shunde Phone: Fax: +86-765-775-1368 +86-765-775-2823 Europe/ Middle East/Africa Austria - Vienna Phone: +43-190-560-0 Fax: +43-190-560-1333 Belgium - Kessel-Lo Phone: +32-16-35-23-00 Fax: +32-16-35-23-52 Germany - Bensheim Phone: +49-6251-133-0 Fax: +49-6251-133-1600 Product Information Center: (Technical Support) Phone: +49-6251-133-1999 Fax: +49-6251-133-1988 Bulgaria - Sofia Phone: +359-2-971-2152 Fax: +359-2-971-2153 Germany - Langen Phone: +49-6103-709-0 Fax: +49-6103-709-1223 Czech Republic - Kurim Phone: +420-5-41-162-111 Fax: +420-5-41-162-223 Germany - Speyer Phone: +49-6232-30-0 Fax: +49-6232-30-2243 Denmark - Viby J +45-70-15-52-00 Phone: Fax: +45-43-44-14-14 Germany HTS Division - Neunkirchen Phone: +49-2247-305-0 Fax: +49-2247-305-122 Egypt - Cairo Phone: +20-2-417-76-47 +20-2-419-23-34 Fax: Estonia - Tallinn Phone: +372-65-05-474 +372-65-05-470 Fax: Finland - Helsinki Phone: +358-95-12-34-20 Fax: +358-95-12-34-250 France - Cergy-Pontoise Phone: +33-1-3420-8888 Fax: +33-1-3420-8600 Product Information Center: (Technical Support) Phone: +33-1-3420-8943 +33-1-3420-8623 Fax: France Tyco Electronics Export - St Ouen L'Aumone Phone: +33-1-3440-7200 Fax: +33-1-3440-7220 or +33-1-3440-7230 1308638-10M-GIC-CGX-8-05 Great Britain - Stanmore Middlesex Phone: +44-208-954-2356 Fax: +44-208-954-6234 Product Information Center: (Technical Support) Freephone GB: 0800-267-666 Phone: +44-141 810 8968 +44-141 810 8971 Fax: Great Britain - Dorcan, Swindon Raychem Products Phone: +44-1793-528171 Fax: +44-1793-572516 Greece - Athens Phone: +30-1-9370-396/397 Fax: +30-1-9370-655 Hungary - Budapest Phone: +36-1-289-1000 +36-1-289-1010 Fax: Ireland - Dublin +353-1-820-3000 Phone: Fax: +353-1-820-9790 Italy - Collegno (Torino) Phone: +39-011-4012-111 Fax: +39-011-4031-116 Lithuania - Vilnius Phone: +370-5-2131-402 Fax: +370-5-2131-403 Netherlands - 's-Hertogenbosch Phone: +31-73-624-6246 +31-73-621-2365 Fax: Product Information Center: (Technical Support) Phone: +31-73-6246-999 Fax: +31-73-6246-998 Norway - Nesbru Phone: +47-66-77-8899 Fax: +47-66-77-8855 Poland - Warsaw Phone: +48-22-45-76-700 Fax: +48-22-45-76-720 Romania - Bucharest +40-1-311-3479/3596 Phone: Fax: +40-1-312-0574 Spain - Barcelona Phone: +34-93-291-0330 Fax: +34-93-201-7879 Product Information Center: (Technical Support): Phone: +34-93-291-0330 Fax: +34-93-200-3779 Sweden - Upplands Vasby Phone: +46-8-50-72-50-00 Fax: +46-8-50-72-50-01 Switzerland - Steinach +41-71-447-0447 Phone: Fax: +41-71-447-0444 Turkey - Istanbul Phone: +90-212-281-8181/2/3 Fax: +90-212-281-8184 Ukraine - Kiev Phone: +38-044-238-6908 +38-044-568-5740 Fax: Russia - Moscow Phone: +7-095-926-5506/07/08/09 Fax: +7-095-926-5505 Russia - St. Petersburg Phone: +7-812-118-8192 Fax: +7-812-118-8193 Slovakia - Banska Bystrica Phone: +421-48-415-20-11/12 +421-48-415-20-13 Fax: Slovenia - Ljubljana Phone: +386-1561-3270 +386-1561-3240 Fax: South Africa - Port Elizabeth Phone: +27-41-405-4500 +27-41-486-1314 Fax: Israel - Yokneam +972-4-959-0508 Phone: Fax: +972-4-959-0506 Tyco Electronics Corporation www.tycoelectronics.com MICRODOT and NANONICS Connectors MICRODOT and NANONICS Connectors Tyco Electronics Corporation Harrisburg, Pennsylvania www.tycoelectronics.com 1308638 10M GIC CGX 8-05