TIL111M, TIL117M, MOC8100M General Purpose 6-Pin Phototransistor Optocouplers Features General Description UL Recognized (File # E90700) The MOC8100M, TIL111M, and TIL117M optocouplers consist of a gallium arsenide infrared emitting diode driving a silicon phototransistor in a 6-pin dual in-line package. VDE Recognized (File #102497 for white package) - Add Option V (e.g., TIL111VM) Applications Power Supply Regulators Digital Logic Inputs Microprocessor Inputs Appliance Sensor Systems Industrial Controls Schematic Package Outlines ANODE 1 6 BASE CATHODE 2 5 COLLECTOR 4 EMITTER NC 3 Figure 1. Schematic Figure 2. Package Outlines (c)2005 Fairchild Semiconductor Corporation TIL111M, TIL117M, MOC8100M Rev. 1.0.3 www.fairchildsemi.com TIL111M, TIL117M, MOC8100M -- General Purpose 6-Pin Phototransistor Optocouplers May 2013 Symbol Parameter Min. Typ. Max. Unit Installation Classifications per DIN VDE 0110/1.89 Table 1 For Rated Mains Voltage < 150 VRMS I-IV For Rated Mains Voltage < 300 VRMS I-IV Climatic Classification 55/100/21 Pollution Degree (DIN VDE 0110/1.89) 2 CTI Comparative Tracking Index 175 VPR Input to Output Test Voltage, Method b, VIORM x 1.875 = VPR, 100% Production Test with tm = 1 s, Partial Discharge < 5 pC 1594 Input to Output Test Voltage, Method a, VIORM x 1.5 = VPR, Type and Sample Test with tm = 60 s, Partial Discharge < 5 pC 1275 VIORM Maximum Working Insulation Voltage 850 Vpeak VIOTM Highest Allowable Over Voltage 6000 Vpeak External Creepage 7 mm External Clearance 7 mm Insulation Thickness 0.5 RIO 9 Insulation Resistance at TS, VIO = 500 V (c)2005 Fairchild Semiconductor Corporation TIL111M, TIL117M, MOC8100M Rev. 1.0.3 10 mm www.fairchildsemi.com 2 TIL111M, TIL117M, MOC8100M -- General Purpose 6-Pin Phototransistor Optocouplers Safety and Insulation Ratings As per IEC60747-5-2. This optocoupler is suitable for "safe electrical insulation" only within the safety limit data. Compliance with the safety ratings shall be ensured by means of protective circuits. Symbol Parameter Device Value Units -40 to +150 C Total Device TSTG Storage Temperature All TOPR Operating Temperature All -40 to +100 C TSOL Lead Solder Temperature All 260 for 10 sec C Total Device Power Dissipation @ TA = 25C All 250 mW 2.94 mW/C All 60 mA TIL111M 3 V PD Derate Above 25C Emitter IF DC/Average Forward Input Current VR Reverse Input Voltage IF(pk) PD MOC8100M, TIL117M 6 Forward Current - Peak (300 s, 2% Duty Cycle) All 3 A LED Power Dissipation @ TA = 25C All 120 mW 1.41 mW/C Derate Above 25C Detector VCEO Collector-Emitter Voltage All 30 V VCBO Collector-Base Voltage All 70 V VECO Emitter-Collector Voltage TIL111M, TIL117M 7 V VEBO Emitter-Base Voltage All 7 Detector Power Dissipation @ TA = 25C All PD Derate Above 25C (c)2005 Fairchild Semiconductor Corporation TIL111M, TIL117M, MOC8100M Rev. 1.0.3 150 mW 1.76 mW/C www.fairchildsemi.com 3 TIL111M, TIL117M, MOC8100M -- General Purpose 6-Pin Phototransistor Optocouplers Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Individual Component Characteristics Symbol Parameter Test Conditions Device Min. Typ.* Max. Unit Emitter VF IR Input Forward Voltage Reverse Leakage Current IF = 16 mA TA = 25C IF = 10 mA for MOC8100M, IF = 16 mA for TIL117M TA = 0C to 70C TA = -55C TIL111M 1.2 1.4 MOC8100M, TIL117M 1.2 1.4 V 1.32 TA = +100C 1.10 VR = 3.0 V TIL111M, TIL117M 0.001 10 A VR = 6.0 V MOC8100M 0.001 10 A Detector BVCEO Collector-Emitter Breakdown Voltage IC = 1.0 mA, IF = 0 All 30 100 V BVCBO Collector-Base Breakdown Voltage IC = 10 A, IF = 0 All 70 120 V BVEBO Emitter-Base Breakdown Voltage IE = 10 A, IF = 0 All 7 10 V BVECO Emitter-Collector Breakdown Voltage IF = 100 A, IF = 0 TIL111M, TIL117M 7 10 V Collector-Emitter Dark Current VCE = 10 V, IF = 0 TIL111M, TIL117M ICEO ICBO 1 50 nA VCE = 5 V, TA = 25C MOC8100M 0.5 25 nA VCE = 30 V, IF = 0, TA = 70C TIL117M, MOC8100M 0.2 50 A 20 nA 10 nA ICBO Collector-Base Dark VCB = 10 V Current VCB = 5 V CCE Capacitance TIL111M, TIL117M MOC8100M VCE = 0 V, f = 1 MHz All 8 pF *All Typical values at TA = 25C (c)2005 Fairchild Semiconductor Corporation TIL111M, TIL117M, MOC8100M Rev. 1.0.3 www.fairchildsemi.com 4 TIL111M, TIL117M, MOC8100M -- General Purpose 6-Pin Phototransistor Optocouplers Electrical Characteristics TA = 25C unless otherwise specified. TA = 25C unless otherwise specified. Transfer Characteristics Symbol Parameter Test Conditions Device Min Typ* Max Unit IF = 10 mA, VCE = 10 V TIL117M 50 % MOC8100M 50 % DC Characteristics CTRCE Current Transfer Ratio, Collector to Emitter IF = 1 mA, VCE = 5 V 30 IF = 1 mA, VCE = 5 V, TA = 0C to +70C IC(ON) On-State Collector Current (Phototransistor Operation) IF = 16 mA, VCE = 0.4 V On-State Collector Current (Photodiode Operation) IF = 16 mA, VCB = 0.4 V VCE (SAT) Collector-Emitter Saturation Voltage TIL111M 2 mA 7 A IC = 500 A, IF = 10 mA TIL117M 0.4 IC = 2 mA, IF = 16 mA TIL111M 0.4 IC = 100 A, IF = 1 mA MOC8100M 0.5 IC = 2 mA, VCC = 10 V, RL = 100 (Fig. 13) MOC8100M 20 TIL117M 10 MOC8100M 20 TIL117M 10 V AC Characteristics W ON W OFF Turn-On Time Turn-Off Time tr Rise Time MOC8100M 2 tf Fall Time TIL117M 2 tr Rise Time (Phototransistor Operation) tf Fall Time (Phototransistor Operation) IC(ON) = 2 mA, VCC = 10 V, RL = 100 (Fig. 13) TIL111M s s s 10 s Isolation Characteristics Symbol VISO Characteristic Input-Output Isolation Voltage Test Conditions f = 60 Hz, t = 1 s RISO Isolation Resistance VI-O = 500 VDC CISO Isolation Capacitance VI-O = 0, f = 1 MHz Min. Typ.* 7500 Max. Units VAC(PK) 1011 0.2 pF *All Typical values at TA = 25C. (c)2005 Fairchild Semiconductor Corporation TIL111M, TIL117M, MOC8100M Rev. 1.0.3 www.fairchildsemi.com 5 TIL111M, TIL117M, MOC8100M -- General Purpose 6-Pin Phototransistor Optocouplers Electrical Characteristics (Continued) 1.8 1.6 VCE = 5.0 V TA = 25C 1.7 1.6 Normalized to IF = 10 mA 1.2 1.5 1.0 NORMALIZED CTR VF - FORWARD VOLTAGE (V) 1.4 1.4 TA = -55C 1.3 TA = 25C 1.2 0.8 0.6 0.4 TA = 100C 0.2 1.1 0.0 1.0 1 10 0 100 2 4 6 8 10 12 14 16 18 20 IF - FORWARD CURRENT (mA) IF - LED FORWARD CURRENT (mA) Figure 4. Normalized CTR vs. Forward Current Figure 3. LED Forward Voltage vs. Forward Current NORMALIZED CTR ( CTRRBE / CTRRBE(OPEN)) 1.4 1.2 IF = 5 mA NORMALIZED CTR 1.0 IF = 10 mA 0.8 IF = 20 mA 0.6 0.4 Normalized to: IF = 10 mA TA = 25C 0.2 -60 -40 1.0 0.9 IF = 20 mA 0.8 IF = 10 mA 0.6 0.5 0.4 0.3 0.2 VCE = 5.0 V 0.1 0.0 10 -20 0 20 40 60 80 VCE (SAT) - COLLECTOR-EMITTER SATURATION VOLTAGE (V) NORMALIZED CTR ( CTRRBE / CTRRBE(OPEN)) 1.0 0.9 0.8 VCE = 0.3 V IF = 20 mA 0.6 0.5 IF = 10 mA 0.4 0.3 IF = 5 mA 0.2 0.1 0.0 100 1000 RBE - BASE RESISTANCE (k) 100 TA = 25C 10 1 IF = 2.5 mA 0.1 IF = 20 mA 0.01 IF = 5 mA 0.001 0.01 IF = 10 mA 0.1 1 10 IC - COLLECTOR CURRENT (mA) Figure 7. CTR vs. RBE (Saturated) (c)2005 Fairchild Semiconductor Corporation TIL111M, TIL117M, MOC8100M Rev. 1.0.3 1000 Figure 6. CTR vs. RBE (Unsaturated) Figure 5. Normalized CTR vs. Ambient Temperature 0.7 100 RBE - BASE RESISTANCE (k) 100 TA - AMBIENT TEMPERATURE (C) 10 IF = 5 mA 0.7 Figure 8. Collector-Emitter Saturation Voltage vs Collector Current www.fairchildsemi.com 6 TIL111M, TIL117M, MOC8100M -- General Purpose 6-Pin Phototransistor Optocouplers Typical Performance Characteristics 1000 IF = 10 mA VCC = 10 V TA = 25C NORMALIZED ton - (ton(RBE) / ton(open)) 5.0 SWITCHING SPEED (s) 100 Tf Toff 10 Ton Tr 1 VCC = 10 V IC = 2 mA RL = 100 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 10 100 0.1 0.1 1 10 1000 10000 100000 RBE - BASE RESISTANCE (k) 100 R - LOAD RESISTOR (k) Figure 10. Normalized ton vs. RBE Figure 9. Switching Speed vs. Load Resistor ICEO - COLLECTOR -EMITTER DARK CURRENT (nA) NORMALIZED toff - (toff(RBE) / toff(open)) 1.4 1.3 1.2 1.1 1.0 0.9 0.8 0.7 0.6 0.5 VCC = 10 V IC = 2 mA RL = 100 0.4 0.3 0.2 0.1 10 100 1000 10000 100000 VCE = 10 V TA = 25C 1000 100 10 1 0.1 0.01 0.001 0 20 40 60 80 100 RBE - BASE RESISTANCE (k) Figure 11. Normalized toff vs. RBE TA - AMBIENTTEMPERATURE (C) Figure 12. Dark Current vs. Ambient Temperature TEST CIRCUIT WAVEFORMS VCC = 10 V INPUT PULSE IC IF INPUT RL 10% OUTPUT OUTPUT PULSE 90% RBE tr ton tf toff Adjust IF to produce IC = 2 mA Figure 13. Switching Time Test Circuit and Waveforms (c)2005 Fairchild Semiconductor Corporation TIL111M, TIL117M, MOC8100M Rev. 1.0.3 www.fairchildsemi.com 7 TIL111M, TIL117M, MOC8100M -- General Purpose 6-Pin Phototransistor Optocouplers Typical Performance Characteristics (Continued) TIL111M, TIL117M, MOC8100M -- General Purpose 6-Pin Phototransistor Optocouplers Reflow Profile 300 260C 280 260 >245C = 42 s 240 220 200 180 C Time above 183C = 90 s 160 140 120 1.822C/s Ramp up rate 100 80 60 40 33 s 20 0 0 60 120 180 270 360 Time (s) Figure 14. Reflow Profile (c)2005 Fairchild Semiconductor Corporation TIL111M, TIL117M, MOC8100M Rev. 1.0.3 www.fairchildsemi.com 8 Option Order Entry Identifier (Example) No option TIL111M S TIL111SM SR2 TIL111SR2M T TIL111TM 0.4" Lead Spacing V TIL111VM VDE 0884 TV TIL111TVM VDE 0884, 0.4" Lead Spacing SV TIL111SVM VDE 0884, Surface Mount SR2V TIL111SR2VM Description Standard Through-Hole Device Surface Mount Lead Bend Surface Mount; Tape and Reel VDE 0884, Surface Mount, Tape and Reel Marking Information 1 V 3 TIL111 2 X YY Q 6 4 5 Definitions 1 Fairchild logo 2 Device number 3 VDE mark (Note: Only appears on parts ordered with VDE option - See order entry table) 4 One-digit year code, e.g., `3' 5 Two-digit work week ranging from `01' to `53' 6 Assembly package code *Note - Parts that do not have the `V' option (see definition 3 above) that are marked with date code `325' or earlier are marked in portrait format. (c)2005 Fairchild Semiconductor Corporation TIL111M, TIL117M, MOC8100M Rev. 1.0.3 www.fairchildsemi.com 9 TIL111M, TIL117M, MOC8100M -- General Purpose 6-Pin Phototransistor Optocouplers Ordering Information TIL111M, TIL117M, MOC8100M -- General Purpose 6-Pin Phototransistor Optocouplers Package Dimensions Figure 15. 6-Pin DIP Through Hole Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. (c)2005 Fairchild Semiconductor Corporation TIL111M, TIL117M, MOC8100M Rev. 1.0.3 www.fairchildsemi.com 10 TIL111M, TIL117M, MOC8100M -- General Purpose 6-Pin Phototransistor Optocouplers Package Dimensions (Continued) Figure 16. 6-Pin DIP Surface Mount Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ (c)2005 Fairchild Semiconductor Corporation TIL111M, TIL117M, MOC8100M Rev. 1.0.3 www.fairchildsemi.com 11 TIL111M, TIL117M, MOC8100M -- General Purpose 6-Pin Phototransistor Optocouplers Package Dimensions (Continued) Figure 17. 6-Pin DIP 0.4" Lead Spacing Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ (c)2005 Fairchild Semiconductor Corporation TIL111M, TIL117M, MOC8100M Rev. 1.0.3 www.fairchildsemi.com 12 12.0 0.1 4.5 0.20 2.0 0.05 0.30 0.05 4.0 0.1 O1.5 MIN 1.75 0.10 11.5 1.0 21.0 0.1 9.1 0.20 0.1 MAX 10.1 0.20 24.0 0.3 O1.5 0.1/-0 User Direction of Feed Figure 18. Carrier Tape Specification (c)2005 Fairchild Semiconductor Corporation TIL111M, TIL117M, MOC8100M Rev. 1.0.3 www.fairchildsemi.com 13 TIL111M, TIL117M, MOC8100M -- General Purpose 6-Pin Phototransistor Optocouplers Carrier Tape Specification TIL111M, TIL117M, MOC8100M -- General Purpose 6-Pin Phototransistor Optocouplers (c)2005 Fairchild Semiconductor Corporation TIL111M, TIL117M, MOC8100M Rev. 1.0.3 www.fairchildsemi.com 14