4 MHz, 7 nV/Hz, Low Offset and Drift, High Precision Amplifiers ADA4077-1/ADA4077-2/ADA4077-4 Data Sheet PIN CONNECTION DIAGRAMS Offset voltage and offset voltage drift B grade: 25 V and 0.25 V/C at VSY = 5 V A grade maximum offset at 25C and maximum drift from -40C to +125C SOIC: 50 V and 0.55 V/C single/dual and 0.75 V/C quad MSOP: 90 V and 1.2 V/C dual and 120 V and 1.2 V/C single TSSOP: 120 V and 1.2 V/C quad MSL1 rated Low input bias current: 1 nA maximum at TA = 25C Low voltage noise density: 6.9 nV/Hz typical at f = 1000 Hz CMRR, PSRR, and AV > 120 dB minimum Low supply current: 400 A per amplifier typical Wide gain bandwidth product: 3.9 MHz at 5 V Dual-supply operation: 2.5 V to 15 V Unity gain stable No phase reversal 3 V- 4 NC 7 V+ TOP VIEW (Not to Scale) 6 OUT 5 NC ADA4077-2 +IN A 3 TOP VIEW (Not to Scale) 8 V+ 7 OUT B 6 -IN B 5 +IN B 10238-001 -IN A 2 V- 4 OUT A 1 -IN A 2 14 OUT D 13 -IN D +IN A 3 ADA4077-4 12 +IN D V+ 4 TOP VIEW (Not to Scale) 11 V- +IN B 5 10 +IN C -IN B 6 9 -IN C OUT B 7 8 OUT C 10238-202 Figure 2. ADA4077-2, 8-Lead MSOP (and 8-Lead SOIC) Figure 3. ADA4077-4, 14-Lead TSSOP (and 14-Lead SOIC) The ADA4077-1 and ADA4077-2 are available in an 8-lead SOIC package, including the B grade, and in an 8-lead MSOP (A grade only). The ADA4077-4 is offered in a 14-lead TSSOP and a 14-lead SOIC package. The single ADA4077-1, dual ADA4077-2, and quad ADA4077-4 amplifiers feature extremely low offset voltage and drift, and low input bias current, noise, and power consumption. Outputs are stable with capacitive loads of more than 1000 pF with no external compensation. 180 Rev. C +IN 8 ADA4077-1 OUT A 1 200 VSY = 5V SOIC NUMBER OF AMPLIFIERS 160 140 120 100 80 60 40 20 VOS (V) 10238-103 0 -50 -45 -40 -35 -30 -25 -20 -15 -10 -5 0 5 10 15 20 25 30 35 40 45 50 MORE Unlike amplifiers by some competitors, the ADA4077-1/ ADA4077-2/ADA4077-4 have an MSL1 rating that is compliant with the most stringent of assembly processes, and they are specified over the extended industrial temperature range from -40C to +125C for the most demanding operating environments. 2 Figure 1. ADA4077-1, 8-Lead SOIC (and 8-Lead MSOP) GENERAL DESCRIPTION Applications for this amplifier include sensor signal conditioning (such as thermocouples, RTDs, strain gauges), process control front-end amplifiers, and precision diode power measurement in optical and wireless transmission systems. The ADA4077-1, ADA4077-2, and ADA4077-4 are useful in line powered and portable instrumentation, precision filters, and voltage or current measurement and level setting. 1 NC = NO CONNECT. NOT INTERNALLY CONNECTED. APPLICATIONS Process control front-end amplifiers Wireless base station control circuits Optical network control circuits Instrumentation Sensors and controls: thermocouples, RTDs, strain bridges, and shunt current measurements Precision filters NC -IN 10238-101 FEATURES Figure 4. Offset Voltage Distribution Table 1. Evolution of Precision Devices by Generation Op Amp Single Dual Quad First OP07 Second OP77 Third OP177 Fourth OP1177 OP2177 OP4177 Fifth AD8677 Sixth ADA4077-1 ADA4077-2 ADA4077-4 Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 (c)2012-2015 Analog Devices, Inc. All rights reserved. Technical Support www.analog.com ADA4077-1/ADA4077-2/ADA4077-4 Data Sheet TABLE OF CONTENTS Features .............................................................................................. 1 ESD Caution...................................................................................6 Applications ....................................................................................... 1 Pin Configurations and Function Descriptions ............................7 General Description ......................................................................... 1 Typical Performance Characteristics ........................................... 10 Pin Connection Diagrams ............................................................... 1 Theory of Operation ...................................................................... 20 Revision History ............................................................................... 2 Applications Information .............................................................. 21 Specifications..................................................................................... 3 Output Phase Reversal ............................................................... 21 Electrical Characteristics, 5 V .................................................. 3 Low Power Linearized RTD ...................................................... 21 Electrical Characteristics, 15 V ................................................ 4 Proper Board Layout .................................................................. 21 Absolute Maximum Ratings ....................................................... 6 Outline Dimensions ....................................................................... 22 Thermal Resistance ...................................................................... 6 Ordering Guide .......................................................................... 24 REVISION HISTORY 6/15--Rev. B to Rev. C Change to Figure 63 ....................................................................... 18 1/14--Rev. A to Rev. B Added ADA4077-1 ............................................................. Universal Changes to Features Section............................................................ 1 Added Figure 1; Renumbered Sequentially .................................. 1 Changes to Table 2 ............................................................................ 3 Changes to Table 3 ............................................................................ 4 Added Figure 5, Figure 6, and Table 6; Renumbered Sequentially ....................................................................................... 7 Changes to Figure 17, Figure 20, and Figure 21 ......................... 11 Changes to Figure 65 ...................................................................... 19 Added Figure 67 and Figure 68..................................................... 19 Changes to Output Phase Reversal Section and Figure 70 ....... 21 Changes to Ordering Guide .......................................................... 24 10/13--Rev. 0 to Rev. A Added ADA4077-4 ............................................................. Universal Changes to Features, General Description, and Figure 1 .............1 Deleted Figure 2; Renumbered Sequentially .................................1 Added Figure 2...................................................................................1 Changes to Table 2.............................................................................3 Changes to Table 3.............................................................................4 Changes to Table 4.............................................................................6 Added Figure 6, Figure 7, and Table 7; Renumbered Sequentially ........................................................................................8 Changes to Typical Performance Characteristics Section ...........9 Changes to Figure 65...................................................................... 20 Updated Outline Dimensions ....................................................... 21 Changes to Ordering Guide .......................................................... 23 10/12--Revision 0: Initial Version Rev. C | Page 2 of 24 Data Sheet ADA4077-1/ADA4077-2/ADA4077-4 SPECIFICATIONS ELECTRICAL CHARACTERISTICS, 5 V VSY = 5.0 V, VCM = 0 V, TA = 25C, unless otherwise noted. Table 2. Parameter INPUT CHARACTERISTICS Offset Voltage (B Grade, 8-Lead SOIC, ADA4077-1/ADA4077-2) Offset Voltage Drift (B Grade, 8-Lead SOIC, ADA4077-1/ADA4077-2) Offset Voltage (A Grade) 8-Lead SOIC (ADA4077-1/ADA4077-2) and 14-Lead SOIC (ADA4077-4) Symbol Test Conditions/Comments Min VOS VOS/T -40C < TA < +125C -40C < TA < +125C Typ Max Unit 10 25 V 0.1 65 0.25 V V/C 15 50 V 105 120 90 220 120 220 V V V V V V 0.25 0.4 0.5 0.55 0.75 1.2 V/C V/C V/C -0.4 +1 +1.5 +0.5 +1.0 +3 5 70 nA nA nA nA V dB dB dB dB pF G 10 22 0.05 V V V V mA mA VOS -40C < TA < +125C 8-Lead MSOP (ADA4077-1) 8-Lead MSOP (ADA4077-2) 50 -40C < TA < +125C 14-Lead TSSOP (ADA4077-4) Offset Voltage Drift (A Grade) 8-Lead SOIC (ADA4077-1/ADA4077-2) 14-Lead SOIC (ADA4077-4) 8-Lead MSOP (ADA4077-1/ADA4077-2) and 14-Lead TSSOP (ADA4077-4) Input Bias Current 15 VOS/T -40C < TA < +125C -40C < TA < +125C IB -40C < TA < +125C Input Offset Current IOS -40C < TA < +125C Input Voltage Range Common-Mode Rejection Ratio CMRR Large Signal Voltage Gain AV Input Capacitance Input Resistance OUTPUT CHARACTERISTICS Output Voltage High Output Voltage Low Output Current Short-Circuit Current Closed-Loop Output Impedance POWER SUPPLY Power Supply Rejection Ratio Supply Current per Amplifier CINCM RIN VOH VOL IOUT ISC ZOUT PSRR ISY VCM = -3.8 V to +3 V -40C < TA < +125C RL = 2 k, VO = -3.0 V to +3.0 V -40C < TA < +125C Common mode Common mode -1 -1.5 -0.5 -1.0 -3.8 122 120 121 120 IL = 1 mA -40C < TA < +125C IL = 1 mA -40C < TA < +125C VDROPOUT < 1.6 V TA = 25C f = 1 kHz, AV = +1 4.1 4 VS = 2.5 V to 18 V -40C < TA < +125C VO = 0 V -40C < TA < +125C 123 120 Rev. C | Page 3 of 24 +0.1 140 130 -3.5 -3.2 128 400 450 650 dB dB A A ADA4077-1/ADA4077-2/ADA4077-4 Data Sheet Parameter DYNAMIC PERFORMANCE Slew Rate Settling Time to 0.1% Gain Bandwidth Product Unity-Gain Crossover -3 dB Closed-Loop Bandwidth Phase Margin Total Harmonic Distortion Plus Noise Symbol Test Conditions/Comments Min Typ Max Unit SR tS GBP UGC -3 dB M THD + N RL = 2 k VIN = 1 V step, RL = 2 k, AV = -1 VIN = 10 mV p-p, RL = 2 k, AV = +100 VIN = 10 mV p-p, RL = 2 k, AV = +1 AV = +1, VIN = 10 mV p-p, RL = 2 k VIN = 10 mV p-p, RL = 2 k, AV = +1 VIN = 1 V rms, AV = +1, RL = 2 k, f = 1 kHz 1.2 3 3.9 3.9 5.9 55 0.004 V/s s MHz MHz MHz Degrees % NOISE PERFORMANCE Voltage Noise Voltage Noise Density en p-p en Current Noise Density MULTIPLE AMPLIFIERS CHANNEL SEPARATION in CS 0.1 Hz to 10 Hz f = 1 Hz f = 100 Hz f = 1000 Hz f = 1 kHz f = 1 kHz, RL = 10 k 0.25 13 7 6.9 0.2 -125 V p-p nV/Hz nV/Hz nV/Hz pA/Hz dB ELECTRICAL CHARACTERISTICS, 15 V VSY = 15 V, VCM = 0 V, TA = 25C, unless otherwise noted. Table 3. Parameter INPUT CHARACTERISTICS Offset Voltage (B Grade, 8-Lead SOIC, ADA4077-1/ADA4077-2) Offset Voltage Drift (B Grade, 8-Lead SOIC, ADA4077-1/ADA4077-2) Offset Voltage (A Grade) 8-Lead SOIC (ADA4077-1/ADA4077-2) and 14-Lead SOIC (ADA4077-4) Symbol Test Conditions/Comments Min VOS VOS/T -40C < TA < +125C -40C < TA < +125C Typ Max Unit 10 35 V 0.1 65 0.25 V V/C 15 50 V 105 V 120 90 220 120 220 V V V V V 0.2 0.4 0.5 0.55 0.75 1.2 V/C V/C V/C -0.4 +1 +1.5 +0.5 +1.0 +13 nA nA nA nA V dB dB VOS -40C < TA < +125C 8-Lead MSOP (ADA4077-1) 8-Lead MSOP (ADA4077-2) 50 -40C < TA < +125C 14-Lead TSSOP (ADA4077-4) Offset Voltage Drift (A Grade) 8-Lead SOIC (ADA4077-1/ADA4077-2) 14-Lead SOIC (ADA4077-4) 8-Lead MSOP (ADA4077-1/ADA4077-2) and 14-Lead TSSOP (ADA4077-4) Input Bias Current 15 VOS/T -40C < TA < +125C -40C < TA < +125C IB -40C < TA < +125C Input Offset Current IOS -40C < TA < +125C Input Voltage Range Common-Mode Rejection Ratio CMRR VCM = -13.8 V to +13 V -40C < TA < +125C Rev. C | Page 4 of 24 -1 -1.5 -0.5 -1.0 -13.8 132 130 +0.1 150 Data Sheet Parameter Large Signal Voltage Gain 8-Lead SOIC and 8-Lead MSOP (ADA4077-1/ADA4077-2) 14-Lead TSSOP and 14-Lead SOIC (ADA4077-4) Input Capacitance Input Resistance OUTPUT CHARACTERISTICS Output Voltage High Output Voltage Low Output Current Short-Circuit Current Closed-Loop Output Impedance POWER SUPPLY Power Supply Rejection Ratio Supply Current per Amplifier ADA4077-1/ADA4077-2/ADA4077-4 Symbol Test Conditions/Comments Min Typ AV RL = 2 k, VO = -13.0 V to +13.0 V 125 130 dB AV -40C < TA < +125C RL = 2 k, VO = -13.0 V to +13.0 V 120 122 130 dB dB -40C < TA < +125C Differential mode Common mode Common mode 120 CINDM CINCM RIN 3 5 100 dB pF pF G IL = 1 mA -40C < TA < +125C IL = 1 mA -40C < TA < +125C VDROPOUT < 1.2 V TA = 25C f = 1 kHz, AV = +1 14.1 14 10 22 0.05 V V V V mA mA VS = 2.5 V to 18 V -40C < TA < +125C VO = 0 V -40C < TA < +125C 123 120 VOH VOL IOUT ISC ZOUT PSRR ISY Max -13.5 -13.2 128 400 500 650 Unit dB dB A A DYNAMIC PERFORMANCE Slew Rate Settling Time to 0.01% Settling Time to 0.1% Gain Bandwidth Product Unity-Gain Crossover -3 dB Closed-Loop Bandwidth Phase Margin Total Harmonic Distortion Plus Noise SR ts ts GBP UGC -3 dB M THD + N RL = 2 k VIN = 10 V p-p, RL = 2 k, AV = -1 VIN = 10 V p-p, RL = 2 k, AV = -1 VIN = 10 mV p-p, RL = 2 k, AV = +100 VIN = 10 mV p-p, RL = 2 k, AV = +1 AV = +1, VIN = 10 mV p-p, RL = 2 k VIN = 10 mV p-p, RL = 2 k, AV = +1 VIN = 1 V rms, AV = +1, RL = 2 k, f = 1 kHz 1.2 16 10 3.6 3.9 5.5 58 0.004 V/s s s MHz MHz MHz Degrees % NOISE PERFORMANCE Voltage Noise Voltage Noise Density en p-p en Current Noise Density MULTIPLE AMPLIFIERS CHANNEL SEPARATION in CS 0.1 Hz to 10 Hz f = 1 Hz f = 100 Hz f = 1000 Hz f = 1 kHz f = 1 kHz, RL = 10 k 0.25 13 7 6.9 0.2 -125 V p-p nV/Hz nV/Hz nV/Hz pA/Hz dB Rev. C | Page 5 of 24 ADA4077-1/ADA4077-2/ADA4077-4 Data Sheet ABSOLUTE MAXIMUM RATINGS THERMAL RESISTANCE Table 4. Parameter Supply Voltage Input Voltage Input Current1 Differential Input Voltage Output Short-Circuit Duration to GND Storage Temperature Range Operating Temperature Range Junction Temperature Range Lead Temperature, Soldering (10 sec) ESD Human Body Model (HBM)2 Field Induced Charge Device Model (FICDM)3 Rating 36 V VSY 10 mA VSY Indefinite -65C to +150C -40C to +125C -65C to +150C 300C 6 kV 1.25 kV JA is specified for the worst case conditions, that is, a device soldered in a circuit board for surface-mount packages. Table 5. Thermal Resistance Package Type 8-Lead MSOP 8-Lead SOIC 14-Lead TSSOP 14-Lead SOIC ESD CAUTION The input pins have clamp diodes to the power supply pins and to each other. Limit the input current to 10 mA or less whenever input signals exceed the power supply rail by 0.3 V. 2 ESDA/JEDEC JS-001-2011 applicable standard. 3 JESD22-C101 (ESD FICDM standard of JEDEC) applicable standard. 1 Stresses at or above those listed under Absolute Maximum Ratings may cause permanent damage to the product. This is a stress rating only; functional operation of the product at these or any other conditions above those indicated in the operational section of this specification is not implied. Operation beyond the maximum operating conditions for extended periods may affect product reliability. Rev. C | Page 6 of 24 JA 190 158 240 115 JC 44 43 43 36 Unit C/W C/W C/W C/W Data Sheet ADA4077-1/ADA4077-2/ADA4077-4 1 2 +IN 3 V- 4 ADA4077-1 TOP VIEW (Not to Scale) 8 NC NC 1 7 V+ -IN 2 6 OUT +IN 3 5 NC V- 4 NC = NO CONNECT. NOT INTERNALLY CONNECTED. 10238-205 NC -IN NC 7 V+ 6 OUT 5 NC Figure 6. ADA4077-1 Pin Configuration, 8-Lead SOIC (R-8) Table 6. ADA4077-1 Pin Function Descriptions, 8-Lead MSOP and 8-Lead SOIC Mnemonic NC -IN +IN V- OUT V+ TOP VIEW (Not to Scale) 8 NC = NO CONNECT. NOT INTERNALLY CONNECTED. Figure 5. ADA4077-1 Pin Configuration, 8-Lead MSOP (RM-8) Pin No. 1, 5, 8 2 3 4 6 7 ADA4077-1 10238-105 PIN CONFIGURATIONS AND FUNCTION DESCRIPTIONS Description No Connect. Not internally connected. Inverting Input. Noninverting Input. Negative Supply Voltage. Output. Positive Supply Voltage. Rev. C | Page 7 of 24 Data Sheet 8 V+ -IN A 2 ADA4077-2 7 OUT B -IN A 2 ADA4077-2 +IN A 3 TOP VIEW (Not to Scale) 6 -IN B +IN A 3 5 +IN B TOP VIEW (Not to Scale) V- 4 OUT A 1 10238-004 OUT A 1 V- 4 Table 7. ADA4077-2 Pin Function Descriptions, 8-Lead MSOP and 8-Lead SOIC Mnemonic OUT A -IN A +IN A V- +IN B -IN B OUT B V+ V+ 7 OUT B 6 -IN B 5 +IN B Figure 8. ADA4077-2 Pin Configuration, 8-Lead SOIC Figure 7. ADA4077-2 Pin Configuration, 8-Lead MSOP Pin No. 1 2 3 4 5 6 7 8 8 10238-005 ADA4077-1/ADA4077-2/ADA4077-4 Description Output Channel A. Inverting Input Channel A. Noninverting Input Channel A. Negative Supply Voltage. Noninverting Input Channel B. Inverting Input Channel B. Output Channel B. Positive Supply Voltage. Rev. C | Page 8 of 24 ADA4077-1/ADA4077-2/ADA4077-4 OUT A 1 -IN A 14 2 13 OUT D OUT A 1 14 OUT D -IN A 2 13 -IN D ADA4077-4 12 +IN D TOP VIEW (Not to Scale) 11 V- 10 +IN C -IN D +IN A 3 +IN A 3 ADA4077-4 12 V+ 4 TOP VIEW (Not to Scale) 11 V- +IN B 5 +IN B 5 10 +IN C -IN B 6 9 -IN C -IN B 6 9 -IN C OUT B 7 8 OUT C OUT B 7 8 OUT C +IN D 10238-206 V+ 4 Figure 9. ADA4077-4 Pin Configuration, 14-Lead TSSOP Figure 10. ADA4077-4 Pin Configuration, 14-Lead SOIC Table 8. ADA4077-4 Pin Function Descriptions, 14-Lead TSSOP and 14-Lead SOIC Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Mnemonic OUT A -IN A +IN A V+ +IN B -IN B OUT B OUT C -IN C +IN C V- +IN D -IN D OUT D 10238-207 Data Sheet Description Output Channel A. Negative Input Channel A. Positive Input Channel A. Positive Supply Voltage. Positive Input Channel B. Negative Input Channel B. Output Channel B. Output Channel C. Negative Input Channel C. Positive Input Channel C. Negative Supply Voltage. Positive Input Channel D. Negative Input Channel D. Output Channel D. Rev. C | Page 9 of 24 ADA4077-1/ADA4077-2/ADA4077-4 Data Sheet TYPICAL PERFORMANCE CHARACTERISTICS 140 120 VSY = 5V MSOP NUMBER OF AMPLIFIERS 60 40 100 80 60 40 20 20 0 -50 -45 -40 -35 -30 -25 -20 -15 -10 -5 0 5 10 15 20 25 30 35 40 45 50 MORE VOS (V) Figure 14. ADA4077-2 Offset Voltage (VOS) Distribution, VSY = 15 V Figure 11. ADA4077-2 Offset Voltage (VOS) Distribution, VSY = 5 V 200 200 VSY = 5V SOIC 180 VSY = 15V SOIC 180 160 NUMBER OF AMPLIFIERS 160 120 100 80 60 140 120 100 80 60 20 20 0 0 10238-144 VOS (V) -50 -45 -40 -35 -30 -25 -20 -15 -10 -5 0 5 10 15 20 25 30 35 40 45 50 MORE 40 -50 -45 -40 -35 -30 -25 -20 -15 -10 -5 0 5 10 15 20 25 30 35 40 45 50 MORE 40 VOS (V) 10238-009 140 Figure 15. Offset Voltage (VOS) Distribution, VSY = 15 V Figure 12. Offset Voltage (VOS) Distribution, VSY = 5 V 15 20 VSY = 15V VSY = 5V 10 10 5 VOS (V) 15 5 0 0 -5 -5 -10 -10 -50 -25 0 25 50 75 100 125 TEMPERATURE (C) 10238-210 VOS (V) 10238-003 VOS (V) 10238-006 -50 -45 -40 -35 -30 -25 -20 -15 -10 -5 0 5 10 15 20 25 30 35 40 45 50 MORE 0 -15 -50 -25 0 25 50 75 100 125 TEMPERATURE (C) Figure 16. Offset Voltage (VOS) vs. Temperature, VSY = 15 V Figure 13. Offset Voltage (VOS) vs. Temperature, VSY = 5 V Rev. C | Page 10 of 24 10238-213 NUMBER OF AMPLIFIERS 80 NUMBER OF AMPLIFIERS VSY = 15V MSOP 120 100 Data Sheet ADA4077-1/ADA4077-2/ADA4077-4 70 50 VSY = 15V, 5V SOIC, A GRADE VSY = 15V, 5V TSSOP AND MSOP, A GRADE 45 60 NUMBER OF AMPLIFIERS NUMBER OF AMPLIFIERS 40 35 30 25 20 15 50 40 30 20 10 10 5 0 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50 0.55 0.60 0.65 0.70 0.75 0.80 0.85 0.90 0.95 1.00 10238-130 0 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50 0.55 0.60 0.65 0.70 0.75 0.80 0.85 0.90 0.95 1.00 TCVOS (V/C) TCVOS (V/C) 10238-008 0 0 Figure 20. TCVOS (SOIC, A Grade) Figure 17. TCVOS (TSSOP and MSOP, A Grade) 140 10 VSY = 15V, 5V SOIC, B GRADE 120 NUMBER OF AMPLIFIERS VOS (V) 5 0 -5 100 80 60 40 20 15 10 20 25 30 35 VSY (V) 0 TCVOS (V/C) Figure 21. TCVOS (SOIC, B Grade) Figure 18. Offset Voltage (VOS) vs. Voltage Supplies (VSY) 0.6 100 AVERAGE +3 80 VSY = 15V 60 40 0.4 20 AVERAGE ISY (mA) 0 -20 0.2 -40 -40C +25C +85C +125C -60 AVERAGE -3 -100 -20 -15 -10 -5 0 VCM (V) 5 10 15 20 0 10238-112 -80 Figure 19. Offset Voltage (VOS) vs. Common-Mode Voltage (VCM), VSY = 15 V VO = 0V 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 VSY (V) 10238-218 VOS (V) 10238-308 5 0 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50 0.55 0.60 0.65 0.70 0.75 0.80 0.85 0.90 0.95 1.00 0 10238-134 -10 Figure 22. Supply Current per Amplifier (ISY) vs. Power Supply Voltage (VSY) Rev. C | Page 11 of 24 ADA4077-1/ADA4077-2/ADA4077-4 Data Sheet 14.4 6 VOH 14.2 OUTPUT VOLTAGE SWING (V) VSY = 5V 2 0 -2 VOL VOH 14.0 13.8 13.6 VOL 0 25 50 100 75 125 TEMPERATURE (C) 13.2 -50 -25 0 25 75 50 125 Figure 23. Output Voltage Swing vs. Temperature, VSY = 5 V Figure 26. Output Voltage Swing vs. Temperature, VSY = 15 V 350 400 VSY = 5V VSY = 15V 350 150 MORE 0 -0.1 -0.2 -1 INPUT BIAS CURRENT (nA) Figure 24. Input Bias Current, VSY = 5 V 10238-016 INPUT BIAS CURRENT (nA) 10238-013 MORE 0 -0.1 -0.2 -0.3 -0.4 -0.5 -0.6 -0.7 0 -0.8 0 -0.9 50 -1.0 50 -0.3 100 -0.4 100 200 -0.5 150 250 -0.6 200 300 -0.7 250 -0.8 NUMBER OF AMPLIFIERS 300 Figure 27. Input Bias Current, VSY = 15 V 0 0 VSY = 5V VSY = 15V -0.1 -0.1 -0.2 -0.2 +IB -IB -IB IB (nA) -0.3 -0.4 -0.3 -0.4 -0.5 -0.5 -0.6 -0.6 -0.7 -50 -25 0 25 50 75 100 125 TEMPERATURE (C) Figure 25. Input Bias Current (IB) vs. Temperature, VSY = 5 V -0.7 -50 -25 0 25 50 75 100 125 TEMPERATURE (C) Figure 28. Input Bias Current (IB) vs. Temperature, VSY = 15 V Rev. C | Page 12 of 24 10238-017 +IB 10238-014 IB (nA) 100 TEMPERATURE (C) 10238-140 -25 10238-021 -6 -50 NUMBER OF AMPLIFIERS VSY = 15V 13.4 -4 -0.9 OUTPUT VOLTAGE SWING (V) 4 Data Sheet ADA4077-1/ADA4077-2/ADA4077-4 10 OUTPUT DROPOUT VOLTAGE (VOL - V-) (V) 1 -40C +25C +85C +125C 0.01 0.1 1 SINK CURRENT (mA) 10 100 1 -40C +25C +85C +125C 0.1 0.001 10238-222 Figure 29. Output Dropout Voltage vs. Sink Current, VSY = 5 V 0.1 1 SOURCE CURRENT (mA) 10 100 0.1 0.001 Figure 30. Output Dropout Voltage vs. Source Current, VSY = 5 V 100 100 100k 1M -50 -150 100M FREQUENCY (Hz) 10 100 150 VSY = 15V AV = -1 RL = 2k 100 50 0 0 -50 -100 10M 0.1 1 SOURCE CURRENT (mA) 50 GAIN (dB) PHASE WITH CL = 0pF PHASE WITH CL = 100pF PHASE WITH CL = 200pF GAIN WITH CL = 0pF GAIN WITH CL = 100pF GAIN WITH CL = 200pF -100 10238-227 GAIN (dB) -150 10k 150 0 0 -100 150 50 50 0.01 Figure 33. Output Dropout Voltage vs. Source Current, VSY = 15 V PHASE MARGIN (Degrees) VSY = 5V AV = -1 RL = 2k -40C +25C +85C +125C 10238-226 0.01 1 10238-229 -40C +25C +85C +125C -50 100 VSY = 15V OUTPUT DROPOUT VOLTAGE (VDD - V+) (V) OUTPUT DROPOUT VOLTAGE (VDD - V+) (V) 1 100 10 10 VSY = 5V 150 0.1 1 SINK CURRENT (mA) Figure 32. Output Dropout Voltage vs. Sink Current, VSY = 15 V 10 0.1 0.001 0.01 -150 10k Figure 31. Open-Loop Gain and Phase vs. Frequency, VSY = 5 V PHASE WITH CL = 0pF PHASE WITH CL = 100pF PHASE WITH CL = 200pF GAIN WITH CL = 0pF GAIN WITH CL = 100pF GAIN WITH CL = 200pF 100k 1M -50 -100 10M -150 100M FREQUENCY (Hz) Figure 34. Open-Loop Gain and Phase vs. Frequency, VSY = 15 V Rev. C | Page 13 of 24 PHASE MARGIN (Degrees) 0.1 0.001 VSY = 15V 10238-225 VSY = 5V 10238-230 OUTPUT DROPOUT VOLTAGE (VOL - V-) (V) 10 ADA4077-1/ADA4077-2/ADA4077-4 Data Sheet 140 133 VSY = 15V VSY = 5V VSY = 5V TO 15V 132 120 131 100 CMRR (dB) PSRR (dB) 130 129 128 127 80 60 40 126 20 -25 0 25 50 75 100 125 TEMPERATURE (C) 0 100 10238-035 124 -50 1k 10k 100k 1M Figure 35. PSRR vs. Temperature, VSY = 5 V to 15 V Figure 38. CMRR vs. Frequency, VSY = 5 V and VSY = 15 V 120 120 VSY = 5V VSY = 15V 100 100 80 80 PSRR (dB) PSRR (dB) 10M FREQUENCY (Hz) 10238-029 125 60 PSRR- 40 60 PSRR- 40 PSRR+ 20 20 0 0 1k 10k 100k 1M 10M FREQUENCY (Hz) -20 100 10238-034 -20 100 1k 10k 100k 1M 10M FREQUENCY (Hz) Figure 36. PSRR vs. Frequency, VSY = 5 V 10238-037 PSRR+ Figure 39. PSRR vs. Frequency, VSY = 15 V 152 159 151 VSY = 15V VSY = 5V 158 150 149 157 CMRR (dB) 147 146 145 156 155 144 143 154 141 -50 -25 0 50 25 TEMPERATURE (C) 75 100 125 153 -50 -25 0 25 50 TEMPERATURE (C) 75 100 Figure 40. CMRR vs. Temperature, VSY = 15 V Figure 37. CMRR vs. Temperature, VSY = 5 V Rev. C | Page 14 of 24 125 10238-033 142 10238-030 CMRR (dB) 148 Data Sheet ADA4077-1/ADA4077-2/ADA4077-4 50 40 50 VSY = 5V G = 100 30 10 G=1 0 -10 -20 10 -10 -20 -30 -40 -40 10k 100k 1M 10M 100M FREQUENCY (Hz) G=1 0 -30 -50 1k G = 10 20 -50 1k 10M 100M 1k VSY = 5V VSY = 15V 100 100 AV = +1 1 0.1 0.1 0.01 0.01 1k 10k 100k 1M 10M FREQUENCY (Hz) 0.001 100 10238-036 0.001 100 AV = +1 1k 10k 100k 1M 10M FREQUENCY (Hz) Figure 45. Output Impedance (ZOUT) vs. Frequency, VSY = 15 V Figure 42. Output Impedance (ZOUT) vs. Frequency, VSY = 5 V 10238-040 VOLTAGE (1V/DIV) VSY = 5V VIN = 1V p-p AV = +1 RL = 2k CL = 300pF TIME (100s/DIV) AV = +10 0V VSY = 15V VIN = 4V p-p AV = +1 RL = 2k CL = 300pF TIME (100s/DIV) Figure 46. Large Signal Transient Response, VSY = 15 V Figure 43. Large Signal Transient Response, VSY = 5 V Rev. C | Page 15 of 24 10238-043 1 AV = +100 10238-039 10 AV = +10 ZOUT () AV = +100 10 ZOUT () 1M Figure 44. Closed-Loop Gain vs. Frequency, VSY = 15 V 1k VOLTAGE (0.2V/DIV) 100k FREQUENCY (Hz) Figure 41. Closed-Loop Gain vs. Frequency, VSY = 5 V 0V 10k 10238-031 20 CLOSED-LOOP GAIN (dB) G = 10 10238-028 CLOSED-LOOP GAIN (dB) 30 VSY = 15V G = 100 40 Data Sheet 0.20 0.15 0.15 0.10 0.10 0.05 0.05 0 -0.05 VSY = 5V VIN = 100mV p-p AV = +1 LOAD = 2k||1000pF -0.10 -0.15 -0.20 -0.2 -0.1 0 0.1 0.2 0.3 0.4 0 -0.05 -0.15 0.5 0.6 0.7 0.8 TIME (ms) -0.20 -0.2 -0.1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 TIME (ms) Figure 50. Small Signal Transient Response, VSY = 15 V Figure 47. Small Signal Transient Response, VSY = 5 V 0.5 0.5 35 0 30 -0.5 25 INPUT 20 INPUT (V) -1.0 5 3 1 OUTPUT -1 TIME (10s/DIV) VSY = 15V VIN = 200mV p-p AV = -100 LOAD = 10k -1.5 -2.0 15 10 -2.5 5 -3.0 0 -3.5 -10 -5 0 10 20 30 40 50 60 70 80 10238-248 VSY = 5V AV = -100 VIN = 200mV RL = 10k OUTPUT VOLTAGE (V) 90 TIME (s) Figure 51. Positive Overload Recovery, VSY = 15 V INPUT VOLTAGE (V) 0.5 INPUT 0 -0.5 0.5 INPUT 0 -0.5 OUTPUT -1 VSY = 5V AV = -100 VIN = 200mV RL = 10k -3 -5 TIME (10s/DIV) -5 VSY = 15V AV = -100 VIN = 200mV RL = 10k 10238-047 OUTPUT -15 TIME (10s/DIV) Figure 52. Negative Overload Recovery, VSY = 15 V Figure 49. Negative Overload Recovery, VSY = 5 V Rev. C | Page 16 of 24 -10 OUTPUT VOLTAGE (V) 0 1 OUTPUT VOLTAGE (V) INPUT VOLTAGE (V) Figure 48. Positive Overload Recovery, VSY = 5 V 10238-051 -0.5 OUTPUT (V) 0 10238-046 INPUT VOLTAGE (V) VSY = 15V VIN = 100mV p-p AV = +1 LOAD = 2k||1000pF -0.10 10238-247 VOLTAGE (V) 0.20 10238-344 VOLTAGE (V) ADA4077-1/ADA4077-2/ADA4077-4 Data Sheet ADA4077-1/ADA4077-2/ADA4077-4 40 35 30 OVERSHOOT (%) 25 20 15 OS+ OS- 10 100p 1n 10n 0 1p 10238-250 10p OS+ OS- 10p 100p 1n 10n LOAD CAPACITANCE (F) 1.0 0.05 10 0.25 0.5 0.04 5 0.20 0.03 0 0.15 0.02 -5 0.10 -10 0.05 -15 0 0.01 -1.5 0 -2.0 -0.01 -20 -2.5 -0.02 -25 10238-251 -1.0 -0.03 TIME (1s/DIV) 0.5 VSY = 5V VIN = 1V p-p RL = 2k -0.10 -0.15 -30 TIME (1s/DIV) Figure 54. Positive 0.1% Settling Time, VSY = 5 V 1.0 -0.05 Figure 57. Positive 0.1% Settling Time, VSY = 15 V 0.05 10 0.04 5 0.25 0.20 VSY = 15V VIN = 10V p-p RL = 2k 0 -0.5 0.02 -5 0.10 -1.0 0.01 -10 0.05 -1.5 0 -15 0 -2.0 -0.01 -20 -0.05 -2.5 -0.02 -25 -0.10 TIME (1s/DIV) INPUT (V) 10238-252 -0.03 -3.0 OUTPUT (V) 0.03 0 -0.15 -30 Figure 55. Negative 0.1% Settling Time, VSY = 5 V TIME (1s/DIV) Figure 58. Negative 0.1% Settling Time, VSY = 15 V Rev. C | Page 17 of 24 0.15 OUTPUT (V) -3.0 VSY = 15V VIN = 10V p-p RL = 2k 10238-254 INPUT (V) -0.5 VSY = 5V VIN = 1V p-p RL = 2k OUTPUT (V) Figure 56. Small Signal Overshoot vs. Load Capacitance, VSY = 15 V OUTPUT (V) Figure 53. Small Signal Overshoot vs. Load Capacitance, VSY = 5 V 0 INPUT (V) 15 5 LOAD CAPACITANCE (F) INPUT (V) 20 10 5 0 1p 25 10238-253 OVERSHOOT (%) 30 VSY = 15V RL = 2k 10238-255 35 40 VSY = 5V RL = 2k ADA4077-1/ADA4077-2/ADA4077-4 Data Sheet 100 VSY = 15V VSY = 5V AV = +1 VSY = 5V VSY = 15V 90 VOLTAGE NOISE CORNER (nV/Hz) VOLTAGE NOISE DENSITY (nV/Hz) 1k 100 10 80 70 60 50 40 30 20 100 1k 10k 100k 1M 10M FREQUENCY (Hz) 0 10238-053 1 10 Figure 59. Voltage Noise Density vs. Frequency, VSY = 5 V and VSY = 15 V 0 0.5 1.0 1.5 2.0 2.5 3.0 FREQUENCY (Hz) 10238-153 10 Figure 62. Voltage Noise Corner vs. Frequency, VSY = 15 V and VSY = 5 V 1 100 VSY = 15V VSY = 5V 10 THD + NOISE (%) 0.01 BANDWIDTH = 80kHz BANDWIDTH = 500kHz BANDWIDTH = 80kHz BANDWIDTH = 500kHz 1 0.1 0.01 0.001 10 100 1k FREQUENCY (Hz) 10k 100k 0.0001 10 100 1k 10k 100k FREQUENCY (Hz) Figure 63. THD + N vs. Frequency, VSY = 15 V Figure 60. THD + N vs. Frequency, VSY = 5 V VSY = 15V VSY = 5V TIME (1s/DIV) Figure 64. 0.1 Hz to 10 Hz Noise, VSY = 15 V Figure 61. 0.1 Hz to 10 Hz Noise, VSY = 5 V Rev. C | Page 18 of 24 10238-058 INPUT VOLTAGE (50nV/DIV) 10238-054 TIME (1s/DIV) 10238-158 0.0001 10238-155 0.001 INPUT VOLTAGE (50nV/DIV) THD + NOISE (%) 0.1 Data Sheet ADA4077-1/ADA4077-2/ADA4077-4 100 200 VSY = 15V IB (pA) -200 -300 -400 -500 -600 -700 -900 -1000 -20 -15 -10 0 -5 5 10 15 20 VCM (V) 1 0.1 10238-219 MEAN +3 MEAN MEAN -3 -800 10 1 VIN VEE CH A 2k 2k + VEE CH B, CH C, CH D -80 -100 -120 VSY = 15V VIN = 10V p-p AV = +1 RL = 10k -140 -160 100 1k 10k 100k VSY = 5V 1k 100k FREQUENCY (Hz) 1M 10238-244 CHANNEL SEPARATION (dB) + -40 -60 - CURRENT NOISE DENSITY (pA/Hz) VCC 10k 100 10k VCC 1k Figure 67. Current Noise Density, VSY = 15 V 0 - 100 FREQUENCY (Hz) Figure 65. Input Bias Current (IB) vs. Common-Mode Voltage (VCM) -20 10 10238-267 -100 Figure 66. Channel Separation, VSY = 15 V 10 1 0.1 1 10 100 1k 10k FREQUENCY (Hz) Figure 68. Current Noise Density, VSY = 5 V Rev. C | Page 19 of 24 100k 10238-268 0 CURRENT NOISE DENSITY (pA/Hz) VSY = 15V -15V VCM +15V TA = 25C 100 ADA4077-1/ADA4077-2/ADA4077-4 Data Sheet THEORY OF OPERATION The ADA4077-1, ADA4077-2, and ADA4077-4 are the sixth generation of the Analog Devices, Inc., industry-standard OP07 amplifier family. The ADA4077-1, ADA4077-2, and ADA4077-4 are high precision, low noise operational amplifiers with a combination of extremely low offset voltage and very low input bias currents. Unlike JFET amplifiers, the low bias and offset currents are relatively insensitive to ambient temperatures, even up to 125C. The Analog Devices proprietary process technology and linear design expertise have produced a high voltage amplifier with superior performance to the OP07, OP77, OP177, and OP1177 in tiny, 8-lead SOIC and 8-lead MSOP packages (ADA4077-1 and ADA4077-2) and 14-lead TSSOP and 14-lead SOIC packages (ADA4077-4). Despite their small size, the ADA4077-1, ADA4077-2, and ADA4077-4 offer numerous improvements, including low wideband noise, wide bandwidth, lower offset and offset drift, lower input bias current, and complete freedom from phase inversion. The ADA4077-1, ADA4077-2, and ADA4077-4 have a specified operating temperature range of -40C to +125C with an MSL1 rating, which is as wide as any similar device in a plastic surfacemount package. This MSL1 rating is increasingly important as printed circuit board (PCB) and overall system sizes continue to shrink, causing internal system temperatures to rise. In the ADA4077-1, ADA4077-2, and the ADA4077-4, the power consumption is reduced by a factor of four compared to the OP177, and the bandwidth and slew rate are both increased by a factor of six. The low power dissipation and very stable performance vs. temperature also reduce warmup drift errors to insignificant levels. Inputs are protected internally from overvoltage conditions referenced to either supply rail. Like any high performance amplifier, maximum performance is achieved by following appropriate circuit and PCB guidelines. Rev. C | Page 20 of 24 Data Sheet ADA4077-1/ADA4077-2/ADA4077-4 APPLICATIONS INFORMATION OUTPUT PHASE REVERSAL +15V Phase reversal is defined as a change of polarity in the amplifier transfer function. Many operational amplifiers exhibit phase reversal when the voltage applied to the input is greater than the maximum common-mode voltage. In some instances, this phase reversal can cause permanent damage to the amplifier. In feedback loops, it can result in system lockups or equipment damage. The ADA4077-1, ADA4077-2, and the ADA4077-4 are immune to phase reversal problems even at input voltages beyond the power supply settings. 0.1F 500 FULL-SCALE ADJ ADR4525 0.1F 4.37k 4.12k 200 6 4.12k 1/2 ADA4077-2 100 7 VOUT 5 100 20 RP, ZERO ADJ 49.9k 100 RTD 5k LINEARITY ADJ V+ 2 8 3 4 V- 2 1 10238-064 1/2 1 ADA4077-2 Figure 70. Low Power Linearized RTD Circuit PROPER BOARD LAYOUT The ADA4077-1, ADA4077-2, and ADA4077-4 are high precision devices. To ensure optimum performance at the PCB level, care must be taken in the design of the board layout. CH2 5.00V M10.0ms T 0.000% A CH1 300mV To avoid leakage currents, maintain a clean and moisture free board surface. Coating the surface creates a barrier to moisture accumulation, and reduces parasitic resistance on the board. 10238-063 CH1 5.00V Figure 69. No Phase Reversal LOW POWER LINEARIZED RTD A common application for a single element varying bridge is a resistance temperature detector (RTD) thermometer amplifier, as shown in Figure 70. The excitation is delivered to the bridge by a 2.5 V reference applied at the top of the bridge. RTDs can have a thermal resistance as high as 0.5C to 0.8C per mW. To minimize errors due to resistor drift, keep the current low through each leg of the bridge. In this circuit, the amplifier supply current flows through the bridge. However, at a maximum supply current of 500 A for the ADA4077-2, the RTD dissipates less than 0.1 mW of power, even at the highest resistance. Therefore, errors due to power dissipation in the bridge are kept under 0.1C. Calibration of the bridge is made at the minimum value of the temperature to be measured by adjusting RP until the output is zero. To calibrate the output span, set the full-scale and linearity potentiometers to midpoint, and apply a 500C temperature to the sensor, or substitute the equivalent 500C RTD resistance. Adjust the full-scale potentiometer for a 5 V output. Finally, apply 250C or the equivalent RTD resistance, and adjust the linearity potentiometer for 2.5 V output. The circuit achieves higher than 0.5C accuracy after adjustment. Keeping supply traces short and properly bypassing the power supplies minimizes the power supply disturbances caused by the output current variation, such as when driving an ac signal into a heavy load. Connect bypass capacitors as closely as possible to the device supply pins. Stray capacitances are a concern at the outputs and the inputs of the amplifier. It is recommended that the signal traces be kept at least 5 mm from supply lines to minimize coupling. A variation in temperature across the PCB can cause a mismatch in the Seebeck voltages at solder joints and other points where dissimilar metals are in contact, resulting in thermal voltage errors. To minimize these thermocouple effects, orient resistors so that heat sources warm both ends equally. Ensure, where possible, that input signal paths contain matching numbers and types of components, to match the number and type of thermocouple junctions. For example, dummy components such as zero value resistors can be used to match real resistors in the opposite input path. Place matching components in close proximity to each other, and orient them in the same manner. Ensure that leads are of equal length so that thermal conduction is in equilibrium. Keep heat sources on the PCB as far away from amplifier input circuitry as is practical. The use of a ground plane is highly recommended. A ground plane reduces EMI noise and maintains a constant temperature across the circuit board. Rev. C | Page 21 of 24 ADA4077-1/ADA4077-2/ADA4077-4 Data Sheet OUTLINE DIMENSIONS 3.20 3.00 2.80 8 3.20 3.00 2.80 5.15 4.90 4.65 5 1 4 PIN 1 IDENTIFIER 0.65 BSC 0.95 0.85 0.75 15 MAX 1.10 MAX 0.80 0.55 0.40 0.23 0.09 6 0 0.40 0.25 10-07-2009-B 0.15 0.05 COPLANARITY 0.10 COMPLIANT TO JEDEC STANDARDS MO-187-AA Figure 71. 8-Lead Mini Small Outline Package [MSOP] (RM-8) Dimensions shown in millimeters 5.00 (0.1968) 4.80 (0.1890) 1 5 6.20 (0.2441) 5.80 (0.2284) 4 1.27 (0.0500) BSC 0.25 (0.0098) 0.10 (0.0040) COPLANARITY 0.10 SEATING PLANE 1.75 (0.0688) 1.35 (0.0532) 0.51 (0.0201) 0.31 (0.0122) 0.50 (0.0196) 0.25 (0.0099) 45 8 0 0.25 (0.0098) 0.17 (0.0067) 1.27 (0.0500) 0.40 (0.0157) COMPLIANT TO JEDEC STANDARDS MS-012-AA CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS (IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN. Figure 72. 8-Lead Standard Small Outline Package [SOIC_N] Narrow Body (R-8) Dimensions shown in millimeters and (inches) Rev. C | Page 22 of 24 012407-A 8 4.00 (0.1574) 3.80 (0.1497) Data Sheet ADA4077-1/ADA4077-2/ADA4077-4 5.10 5.00 4.90 14 8 4.50 4.40 4.30 6.40 BSC 1 7 PIN 1 0.65 BSC 1.20 MAX 0.15 0.05 COPLANARITY 0.10 0.20 0.09 0.30 0.19 0.75 0.60 0.45 8 0 SEATING PLANE 061908-A 1.05 1.00 0.80 COMPLIANT TO JEDEC STANDARDS MO-153-AB-1 Figure 73. 14-Lead Thin Shrink Small Outline Package [TSSOP] (RU-14) Dimensions shown in millimeters 8.75 (0.3445) 8.55 (0.3366) 8 14 1 7 1.27 (0.0500) BSC 0.25 (0.0098) 0.10 (0.0039) COPLANARITY 0.10 0.51 (0.0201) 0.31 (0.0122) 6.20 (0.2441) 5.80 (0.2283) 0.50 (0.0197) 0.25 (0.0098) 1.75 (0.0689) 1.35 (0.0531) SEATING PLANE 45 8 0 0.25 (0.0098) 0.17 (0.0067) 1.27 (0.0500) 0.40 (0.0157) COMPLIANT TO JEDEC STANDARDS MS-012-AB CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS (IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN. Figure 74. 14-Lead Standard Small Outline Package [SOIC_N] Narrow Body (R-14) Dimensions shown in millimeters and (inches) Rev. C | Page 23 of 24 060606-A 4.00 (0.1575) 3.80 (0.1496) ADA4077-1/ADA4077-2/ADA4077-4 Data Sheet ORDERING GUIDE Model 1 ADA4077-1ARMZ ADA4077-1ARMZ-R7 ADA4077-1ARMZ-RL ADA4077-1ARZ ADA4077-1ARZ-R7 ADA4077-1ARZ-RL ADA4077-1BRZ ADA4077-1BRZ-R7 ADA4077-1BRZ-RL ADA4077-2ARMZ ADA4077-2ARMZ-R7 ADA4077-2ARMZ-RL ADA4077-2ARZ ADA4077-2ARZ-R7 ADA4077-2ARZ-RL ADA4077-2BRZ ADA4077-2BRZ-R7 ADA4077-2BRZ-RL ADA4077-4ARUZ ADA4077-4ARUZ-R7 ADA4077-4ARUZ-RL ADA4077-4ARZ ADA4077-4ARZ-R7 ADA4077-4ARZ-RL 1 Temperature Range -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C Package Description 8-Lead Mini Small Outline Package [MSOP] 8-Lead Mini Small Outline Package [MSOP] 8-Lead Mini Small Outline Package [MSOP] 8-Lead Standard Small Outline Package [SOIC_N] 8-Lead Standard Small Outline Package [SOIC_N] 8-Lead Standard Small Outline Package [SOIC_N] 8-Lead Standard Small Outline Package [SOIC_N] 8-Lead Standard Small Outline Package [SOIC_N] 8-Lead Standard Small Outline Package [SOIC_N] 8-Lead Mini Small Outline Package [MSOP] 8-Lead Mini Small Outline Package [MSOP] 8-Lead Mini Small Outline Package [MSOP] 8-Lead Standard Small Outline Package [SOIC_N] 8-Lead Standard Small Outline Package [SOIC_N] 8-Lead Standard Small Outline Package [SOIC_N] 8-Lead Standard Small Outline Package [SOIC_N] 8-Lead Standard Small Outline Package [SOIC_N] 8-Lead Standard Small Outline Package [SOIC_N] 14-Lead Thin Shrink Small Outline Package [TSSOP] 14-Lead Thin Shrink Small Outline Package [TSSOP] 14-Lead Thin Shrink Small Outline Package [TSSOP] 14-Lead Standard Small Outline Package [SOIC_N] 14-Lead Standard Small Outline Package [SOIC_N] 14-Lead Standard Small Outline Package [SOIC_N] Package Option RM-8 RM-8 RM-8 R-8 R-8 R-8 R-8 R-8 R-8 RM-8 RM-8 RM-8 R-8 R-8 R-8 R-8 R-8 R-8 RU-14 RU-14 RU-14 R-14 R-14 R-14 Branding A35 A35 A35 A2X A2X A2X Z = RoHS Compliant Part. (c)2012-2015 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D10238-0-6/15(C) www.analog.com/ADA4077-1/ADA4077-2/ADA4077-4 Rev. C | Page 24 of 24 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Analog Devices Inc.: ADA4077-2ARMZ ADA4077-2ARMZ-R7 ADA4077-2ARZ ADA4077-2ARZ-R7 ADA4077-2BRZ ADA4077-2ARMZRL ADA4077-2ARZ-RL ADA4077-2BRZ-R7 ADA4077-2BRZ-RL ADA4077-4ARZ ADA4077-4ARUZ ADA40771ARMZ ADA4077-1ARZ ADA4077-1ARMZ-R7 ADA4077-1ARMZ-RL ADA4077-1BRZ-R7 ADA4077-1ARZ-R7 ADA4077-1ARZ-RL ADA4077-1BRZ ADA4077-1BRZ-RL ADA4077-4ARUZ-RL ADA4077-4ARZ-RL ADA40774ARUZ-R7 ADA4077-4ARZ-R7