Model LMM-H03 Mass Air Flow Sensor
Model LMM-H03 Rev3 www.meas-spec.com 28 August 2012
1/5
Hot Film Anemometer Component
Highly reliable and long term stable
Bi-directional airflow measurement
Fast reaction time
Manufactured according ISO TS16949
Can be adapted to various flow channel
geometries
Can be used for almost all kind of gases and
volatile substances
DESCRIPTION
LMM-H03 is a thermodynamic sensing element for the bidirectional measurement of mass air flow in a well
defined channel. It is dedicated for applications with high reliability requirements such as medical or industrial
gas flow applications. Mounted directly within the flowing media the LMM-H03 is sensitive against the heat
transfer on a micrometer scale. This heat transfer is detected by a micro-machined silicon device which is
mounted on ceramic substrate defining the geometry of the sensing element.
The functional principle of the LMM-H03 is a hot film anemometer, which is the thin film version of the hot wire
anemometer. A thin film heating element (heater) is heated to a defined temperature difference with respect to
the air. At zero flow there is heat dissipation due to the thermal conductivity of the air. With applied flow the heat
dissipation increases steadily with the flow rate.
The sensing element can be operated at Constant Power and Constant Voltage mode. However, it is
recommended to operate LMM-H03 in the described Constant Temperature Difference (CTD) mode. In the CTD
mode the electronics detects any change of the thermal equilibrium very quickly and compensates it by
adjusting the power settings through the heaters. This allows a very reliable mass flow measurement with a very
short time constant which is in the order of milliseconds.
FEATURES APPLICATIONS
Highly reliable and long term stable Industrial gas flow measurement
Fast reaction time Leakdetection in pressurized air systems
Can be adapted to various flow channel geometries Spirometer
Can be used for almost all kind of gases and volatile
substances