NTE622
Silicon Rectifier, General Purpose, High Voltage,
Fast Recovery
DO−213AA Surface Mount Type Case
Features:
DHigh Temperature Metallurgically Bonded
DGlass Passivated Junction
DHigh Temperature Soldering Guaranteed:
+450°C/5 Seconds at Terminals. Complete Device Submersible Temperature of
+260°C/10 Seconds in Solder Bath.
Maximum Ratings and Electrical Characteristics: (TA = +25°C unless otherwise specified.
60Hz, resistive or inductive load. For capacitive load, derate current by 20%.)
Maximum Recurrent Peak Reverse Voltage, VRRM 400V.....................................
Maximum RMS Voltage, VRMS 280V......................................................
Maximum DC Blocking Voltage, VDC 400V.................................................
Maximum Average Forward Rectified Current (TT = +75°C), IT(AV) 0.5A.......................
Peak Forward Surge Current, IFSM
(8.3ms Single Half Sine−Wave Superimposed on Rated Load) 10A.....................
Maximum Instantaneous Forward Voltage (IT = 0.5A), VF1.2V...............................
Maximum DC Reverse Current (VDC = 400V), IR
TA = +25°C 5μA..................................................................
TA = +125°C 50μA................................................................
Maximum Reverse Recovery Time (TJ = +25°C, Note 1), trr 50ns.............................
Typical Junction Capacitance (Note 2), CJ4pF.............................................
Operating Junction Temperature Range, TJ−65° to +175°C..................................
Storage Temperature Range, Tstg −65° to +175°C..........................................
Maximum Thermal Resistance, Junction−to−Terminal (Note 3), RthJL 70°C/W..................
Maximum Thermal Resistance, Junction−to−Ambient (Note 4), RthJA 150°C/W.................
Note 1. Reverse Recovery Test Conditions: IF = 0.5A, IR = 1A, IRR = 0.25A..
Note 2. Measured at 1MHz and applied reverse voltage of 4VDC.
Note 2. Thermal resistance, junction−to−terminal, 5.0mm2 copper pads to each terminal.
Note 3. Thermal resistance, junction−to−ambient, 5.0mm2 copper pads to each terminal.
Rev. 1−11
.066
(1.676)
Max Dia
Solderable Ends
1st Band (Device Type)
2nd Band (Voltage Type)
.022 (.559) Max
.145 (3.683) Max
Two Bands Indicates Cathode
.022 (.559) Max
