B 2 " 10 9 7 6 5 4 3 2 1 -~ Tc > Ee icy 7 MATERIAL | py ating | WRE | corm WIRE MAX NUMBER SIZE SIZE INSULATION #012 2012 +005 #012 #005 2,012 0.30 +0.30 20,13 0,30 20,13 +0.30 43030-0001 A 20-24 | CHAIN 20-24 073/185 090/2.29 100/2.54 030/0.76 075/191 025/0.64 082/2,08 43030-0002 B 20-24 | CHAIN 26-30 050/127 075/191 083/2.10 025/0.64 058/1.47 .020/0.51 065/1.65 43030-0003 C 20-24 | CHAIN 43030-0004 A 26-30 | CHAIN 43030-0005 B 26-30 | CHAIN 43030-0006 C 26-30 | CHAIN 43030-0007 A 20-24 | LOOSE 43030-0008 B 20-24 | LOOSE 43030-0009 C 20-24 | LOOSE 43030-0010 A 26-30 | LOOSE 43030-0011 B 26-30 | LOOSE 43030-0012 C 26-30 | LOOSE Gr > NOTES SECTION W-W 1) MATERIAL: PHOSPHOR BRONZE ALLOY 2) TERMINAL PLATING: "At HOT TIN DIP: .000040/0.00102 MIN. 433 "BY .000015/0.00038 MIN. SELECT GOLD moore: .000100/0.00254 MIN. SELET TIN ALL OVER .000050/0,00127 MIN, NICKEL OVERALL. "C? 000030/0.00076 MIN, SELECT GOLD .000100/0.00254 MIN. SELECT TIN G ALL OVER .000050/0.00127 MIN. NICKEL OVERALL. THE PRIMARY SHIPPING CARTON WILL BE LABELED COMPLIANT TO RoHS DIRECTIVE 2002/95/EC AND ELV ANNEX Il OF DIRECTIVE 2000/53/EC." 0442002 CARTONS WITHOUT THIS LABEL MAY CONTAIN PRODUCT WITH TIN/LEAD 010 41220.05 IN THE PC TAIL AREA. 02500 I MATERIAL NUMBERS WITH SELECT PLATING ARE POST PLATED. MAX VESTIGE 3) PRODUCT SPECIFICATION: PS-43045, PS-43650, PS-44300-001. 169 4) PACKAGING SPECIFICATION: PK-43030-001 (REEL), PK-43030-003 (LOOSE), 4.30 5) TERMINAL FOR USE IN A MICRO FIT RECEPTACLE #43025-xxxx, 43645-xxxx, 138 AND 44133-x2%x, 3.50 MINMUM AREA OE 6) FOR TERMINAL ORIENTATION IN RECEPTACLE SEE DRAWING #SDA-43025 2081 SELECT GOLD PLATING COINED AREA OR SDA-43645. 2.05 2 PLACES 7) THIS TERMINAL IS DESIGNED IN METRIC. W \V ~~ (INSIDE ONLY} 8) MOLEX RECOMMENDS THE USE OF MICRO-FIT TEST PLUG (SERIES 44242) WHENEVER CONTINUITY TESTING IS PERFORMED. TEST PLUGS MUST NOT 4 BE USED TO MAKE OR BREAK UNDER LOAD, MOLEX DOES NOT RECOMMEND HL ot USING STANDARD MATING COMPONENTS (SERIES 43020, 43045, 43640, 43650, OR 43031) FOR HARNESS TESTING PURPOSES. W WV osseans | SELECT 73540.08 | TIN AREA (SCALE 20:1) (BOTH SIDES) mea DIMENSION STYLE SCALE DESIGN UNITS. mo Se MN UNLESS SPECINIED) IN/MM 701 | METRIC |O CRED ANGLE 8.835 mmm INCH __| ORAWN BY DATE |TITLE oR RRR ZW-0 PASE _e UELLER 2002/08/03 MICRO-FIT (3.0) FEMALE mo E 3 PLACES|+--- _[+,010 __ |CHECKED BY DATE CRIMP TERMINAL BE ymai| 7 Rea ei ag [eee tune menu wwmr -- x3 BAR ANGULAR +1/2MARGULIS 2002/08/03 Kole MOLEX INCORPORATED a 8 SAH MATERIAL NO. DOCUMENT NO. SHEET NO, Qf xk DRAFT WHERE APPLICABLE] SEE CHART SD-43030-xxxx 1 OF 1 <usox SIZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX Nik WITHIN DIMENSIONS INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_frame_C_P_AM_T 2 " 40 9 | Rev. E 2006/04/15 7 | 6 5 4 3 2 | 4