www.fairchildsemi.com 2 OF 4 12/13/01 DS300371
PARAMETER TEST CONDITIONS SYMBOL MIN TYP MAX UNITS
Reverse Breakdown Voltage IR= 0.1 mA VR32 ——V
Dark Reverse Current VR= 10 V IR(D) ——30 nA
Peak Sensitivity VR= 5 V !PS —930 —nM
Reception Angle at 1/2 Power "—90 —Deg.
Photocurrent (6) VCE = 5 V, Ee= 1.0 mW/cm2Iph 30 ——µA
Capacitance VR= 3 V C —20 —pF
Rise Time VR= 5 V, RL= 1 KΩtr—50 —nS
Fall Time VR= 5 V, RL= 1 KΩtf—50 —nS
ELECTRICAL CHARACTERISTICS (TA=25°C)
Parameter Symbol Rating Unit
Operating Temperature TOPR -40 to +85 °C
Storage Temperature TSTG -40 to +85 °C
Soldering:
Lead Temperature (Iron) (2,3,4,5) TSOL 240 for 5 sec °C
Lead Temperature (Flow) (2,3,5) 260 for 10 sec
Reverse Voltage VR32 V
Power Dissipation 25°C Ambient (2) PD150 mW
ABSOLUTE MAXIMUM RATINGS (TA= 25°C unless otherwise specified)
NOTE:
1. Derate power dissipation linearly 2.5 mW/°C above 25°C.
2. RMA flux is recommended.
3. Methanol or Isopropyl alcohols are recommended as cleaning agents.
4. Soldering iron tip 1/16” (1.6 mm) from housing.
5. As long as leads are not under any stress or spring tension.
6. Light source is an GaAs LED which has a peak emission wavelength of 940 nm.
SIDELOOKER PIN PHOTODIODE
QSE973