PTN1206E3402FBT1 - Vishay Presicion Group

PTN

Vishay Thin Film

Document Number: 60026 For technical questions, contact: thin-film@vishay.com www.vishay.com

Revision: 02-Nov-09 55

Commercial Thin Film Chip Resistors

SURFACE MOUNT

CHIPS

These chip resistors are available in both “top side” and

“wraparound” termination styles in a variety of sizes. They

incorporate self passivated, enhanced Tantalum Nitride

films, to give superior performance on moisture resistance,

voltage coefficient, power handling and resistance stability.

The terminations consist of an adhesion layer, a leach

resistant nickel barrier, and solder coating. This product will

out-perform all requirements of characteristic E of

MIL-PRF-55342.

CONSTRUCTION

FEATURES

•Lead (Pb)-free or Sn/Pb terminations available

•Moisture resistant

•High purity alumina substrate

•Non-standard values available

•Will pass + 85 °C, 85 % relative humidity and

10 % rated power

•100 % visual inspected per MIL-PRF-55342

•Very low noise and voltage coefficient (< - 30 dB)

•Non-inductive

•Laser-trimmed tolerances to ± 0.1 %

•Wraparound resistance less than 10 mΩ

•Epoxy bondable termination available

•Compliant to RoHS directive 2002/95/EC

TYPICAL PERFORMANCE

Note

(1) 0705 and 0805 are the same (only use 0805 when ordering)

* Pb containing terminations are not RoHS compliant, exemptions may apply

Actual Size

1505

Adhesion Layer

High Purity

Alumina Substrate

Nickel Barrie

Solder

Coating

Passivation

anta

Resistive Film

ABS

TCR 25

TOL 0.1

STANDARD ELECTRICAL SPECIFICATIONS

TEST SPECIFICATIONS CONDITIONS

Material Tantalum nitride

Absolute TCR ± 25 ppm/°C, ± 50 ppm/°C, ± 100 ppm/°C - 55 °C to + 125 °C

Absolute Tolerance ± 1.0 %, ± 0.5 % and ± 0.1 % + 25 °C

Operating Temperature Range - 55 °C to + 125 °C

Noise < - 30 dB

CASE SIZE POWER RATING (mW) MAX. WORKING VOLTAGE RESISTANCE RANGE (Ω)

0402 50 75 20 to 35K

0502 100 75 20 to 65K

0505 150 75 20 to 130K

0603 150 75 10 to 80K

0805 (1), 0705 (1) 200 100 10 to 301K

1005 250 100 10 to 301K

1010 500 150 50 to 600K

1206 400 200 10 to 1M

1505 400 150 10 to 1M

2208 750 150 10 to 1.75M

2010 800 200 10 to 2M

2512 1000 200 10 to 3M

PTN

Vishay Thin Film Commercial Thin Film Chip Resistors

www.vishay.com For technical questions, contact: thin-film@vishay.com Document Number: 60026

56 Revision: 02-Nov-09

SURFACE MOUNT

CHIPS

DIMENSIONS in inches

Note

(1) 0705 and 0805 are the same (only use 0805 when ordering)

CASE SIZE L W T D E

0402 0.042 ± 0.008 0.022 ± 0.005 0.012 to 0.033 0.010 ± 0.005 0.010 ± 0.005

0502 0.055 ± 0.006 0.025 ± 0.005 0.012 to 0.033 0.010 ± 0.005 0.015 ± 0.005

0505 0.055 ± 0.006 0.050 ± 0.005 0.012 to 0.033 0.010 ± 0.005 0.015 ± 0.005

0603 0.064 ± 0.006 0.032 ± 0.005 0.020 Max. 0.012 ± 0.005 0.015 ± 0.005

0805 (1), 0705 (1) 0.080 ± 0.006 0.050 ± 0.005 0.015 to 0.033 0.015 ± 0.005 0.015 ± 0.005

1005 0.105 ± 0.007 0.050 ± 0.005 0.015 to 0.033 0.015 ± 0.005 0.015 ± 0.005

1010 0.105 ± 0.007 0.100 ± 0.005 0.015 to 0.033 0.015 ± 0.005 0.015 ± 0.005

1206 0.126 ± 0.008 0.063 ± 0.005 0.015 to 0.033 0.020 + 0.005, - 0.010 0.020 + 0.005, - 0.010

1505 0.155 ± 0.007 0.050 ± 0.005 0.015 to 0.033 0.015 ± 0.005 0.015 ± 0.005

2010 0.209 ± 0.009 0.098 ± 0.005 0.015 to 0.033 0.020 ± 0.005 0.020 ± 0.005

2208 0.230 ± 0.007 0.075 ± 0.005 0.015 to 0.033 0.020 ± 0.005 0.020 ± 0.005

2512 0.259 ± 0.009 0.124 ± 0.005 0.015 to 0.033 0.020 ± 0.005 0.020 ± 0.005

ENVIRONMENTAL TESTS (VISHAY PERFORMANCE VS. MIL-PRF-55342 REQUIREMENTS)

ENVIRONMENTAL TEST LIMITS MIL-PRF-55342

CHARACTERISTIC “E”

TYPICAL VISHAY

PERFORMANCE

Resistance Temperature Characteristic ± 25 ppm/°C ± 15 ppm/°C

Max. Ambient Temp. at Rated Wattage + 70 °C + 70 °C

Max. Ambient Temp. at Power Derating + 150 °C + 150 °C

Thermal Shock ΔR± 0.1 % ± 0.040 %

Low Temperature Operation ΔR± 0.1 % Average from Al qual. ± 0.001 %

Short Time Overload ΔR± 0.10 % PTN Al qual. ± 0.002 %

High Temperature Exposure ΔR± 0.1 % ± 0.04 % based on PTN Al termination qual. reports

Resistance to Soldering Heat ΔR± 0.2 % PTN Al qual. ± 0.008 %

Moisture Resistance ΔR± 0.2 % PTN Al qual. ± 0.004 %

Life + 70 °C at 1000 h ΔR± 0.50 % PTN Al qual. ± 0.014 %

Insulation Resistance Ω10 000 Minimum > 100 000 MΩ

PTN

Commercial Thin Film Chip Resistors Vishay Thin Film

Document Number: 60026 For technical questions, contact: thin-film@vishay.com www.vishay.com

Revision: 02-Nov-09 57

SURFACE MOUNT

CHIPS

FILM LOAD LIFE STABILITY (at + 125 °C) DERATING CURVE

0.1 %

0.06 %

0.05 %

0.04 %

0.03 %

0.02 %

0.01 %

0.006 %

0.005 %

0.004 %

0.003 %

0.002 %

0.001 %

1000 1200 1400 1600 1800 2000

Time in h at + 125 °C

Maximum

Absolute

Change

800600400200

Ambient Temperature °C

0 70 125 150

100

Percent of Rated Power

GLOBAL PART NUMBER INFORMATION

New Global Part Numbering: PTN1206E1002BBT1 (preferred part number format)

GLOBAL

MODEL

CASE

SIZE

TCR

CHARACTERISTIC RESISTANCE TOLERANCE TERMINATION PACKAGING

PTN 0402

0502

0505

0603

0805

1005

1010

1206

1505

2208

2010

2512

E = ± 25 ppm/°C

H = ± 50 ppm/°C

K = ± 100 ppm/°C

The first 3 digits

are significant

figures and the

last digit specifies

the number of

zeros to follow.

“R” designates

the decimal point.

Example:

10R0 = 10 Ω

1000 = 100 Ω

1001 = 1 kΩ

B = ± 0.1 %

D = ± 0.5 %

F = ± 1 %

G = ± 2 %

J = ± 5 %

B = Wraparound

Sn/Pb solder

Min. 60 % Pb

w/nickel barrier

G = Wraparound Au

over Ni (gold)

termination

epoxy bondable

RoHS compliant - e4

S = Wraparound lead

(Pb)-free solder

96.5 % Sn/3.0 %Ag/

0.5 % Cu

RoHS compliant - e1

BS = BULK

100 Min 1 Mult

WS = WAFFLE

100 Min 1 Mult

W0 = WAFFLE

100 Min 100 Mult

TAPE AND REEL

T0 = 100 Min 100 Mult

T1 = 1000 Min 1000 Mult

T3 = 300 Min 300 Mult

T5 = 500 Min 500 Mult

TF = Full Reel

TS = 100 Min 1 Mult

Historical Part Number example: PTN0805H8801BBT

PTN 0805 H 8801 B B T

STYLE CASE SIZE TCR

CHARACTERISTIC

OHMIC VALUE TOLERANCE TERMINATION PACKAGING

06E1 02B01 BT1NPT 2

Document Number: 91000 www.vishay.com

Revision: 18-Jul-08 1

Disclaimer

Legal Disclaimer Notice

Vishay

All product specifications and data are subject to change without notice.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf

(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein

or in any other disclosure relating to any product.

Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any

information provided herein to the maximum extent permitted by law. The product specifications do not expand or

otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed

therein, which apply to these products.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this

document or by any conduct of Vishay.

The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless

otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such

applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting

from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding

products designed for such applications.

Product names and markings noted herein may be trademarks of their respective owners.