Discover TDK Solutions Discover TDK Solutions RF Components for Wireless Applications RF Components for Wireless Applications For samples, datasheets and additional product information on these and other TDK Wireless Solutions . . . TDK RF Components & Services : TDK Corporation of America 1221 Business Center Drive, Mount Prospect, IL 60056 Phone: +1 (847) 803-6100 Fax: +1 (847) 803-1125 Email: wirelessinfo@tdktca.com Visit our website: WWW.TDK.COM D i s c o v e WWW.TDK.COM r T D K D i Band Pass Filters Diplexers Low Pass Filters Couplers High Frequency Inductors Circulators/ Isolators s c o v e WWW.TDK.COM Baluns Antennas High Pass Filters Test Services Test Equipment Anechoic Chambers r T D K TDK Services for UWB Wireless Systems TDK Test & Measurement Solutions for Your UWB Wireless System Table of Contents UWB-EMC Test System UWB-EMC test system (for test and measurement of radiated emission from UWB radio) Ultra wide frequency measurement required FCC compliance test. Ultra wide dynamic ranges for UWB test which radiate very low power emission. TDK's original anechoic chamber, antenna, and software based test system. Possible to upgrade your EMC test systems to state-of-theart UWB-EMC test system. 3m chamber (FCC comply, 9x6x5.7m) Compact chamber (FCC comply, 7x4x3m) TDK's original hybrid anechoic chamber Test system for measurement up to 40GHz Hardware, software, & training are included TDK Offers Complete Turnkey Systems of Anechoic Chambers TDK offers a "single vendor" solution for test facilities by offering both systems and test chambers. Offering a TDK line of turnkey 3 meter, 5 meter, 10 meter, and compact anechoic chamber solutions based on top-performing TDK absorber technologies. Each facility is built with high-performance radio wave absorbing materials selected specifically to match your test requirements and manage the implementation of both systems and chambers to deliver a turnkey test facility that is tightly integrated. Anechoic chambers for EMC Testing: 3m type (FCC comply, 9x6x5.7m) or compact type (FCC comply,7x4x3m) TDK's high performance electromagnetic absorber material (IB-015 and IP-045 absorber) Automatically controlled turntable and antenna mast via optical fiber. Normalized Site Attenuation (NSA) measurement for compliance. D i s c o TDK offers a series of RF components for a variety of wireless applications. From filters and antennas to test services and anechoic chambers, TDK has a solution for you. Anechoic Chamber for Antenna Testing Anechoic chamber (compact type, 7x4x4m) TDK's high performance electromagnetic absorber material (IS-060 absorber) TDK' original oblique incident absorber, IS-SM050, for exceptional absorption performance Quiet zone (QZ) measurement v e WWW.TDK.COM 18 r T D K D i WLAN SOLUTIONS PAGE 04 BLUETOOTH SOLUTIONS PAGE 08 WiMAX Solutions Page 10 GPS SOLUTIONS PAGE 13 UWB SOLUTIONS PAGE 14 s c o v e WWW.TDK.COM r T D K RF Components for WLAN Applications TDK WLAN components provide leading edge miniaturization technology while providing exceptional electrical characteristics. TDK RF Components are recommended by leading WLAN chipset manufacturers. The following pages list our standard BPF's, LPF's, HPF's, diplexers and baluns for 2.4GHz & 5GHz WLAN. TDK Services for UWB Wireless Systems TDK Compliance Test Services & Expertise For UWB Wireless Systems TDK's advanced wireless radio testing services have been used by leading UWB chipset companies for both, FCC compliance and UWB transceiver development. TDK provides complete regulatory compliance testing, report preparation and submission. Let TDK work with you to develop test and measurement solution for your Certified Wireless USB products. TDK Test Labs located in Austin & Tokyo TDK supports the complete FCC submission process. Please contact TDK for evaluation samples and detailed specifications. Diplexer for 2.4GHz & 5GHz Start Frequency MHz Stop Frequency MHz Ins. Loss dB (MAX) Start Frequency MHz Stop Frequency MHz Insertion Loss dB (MAX) Size mm (typ.) Part Number 2300 2500 0.65 4900 5950 1.4 2.0x1.25x0.95 DPX205950DT-9008A1 2300 2500 0.65 4900 5950 1.4 2.0x1.25x0.95 DPX205950DT-9108A1 2400 2500 0.5 4900 5850 0.75 2.0x1.25x0.95 DPX205850DT-4027B1 v e WWW.TDK.COM r D i s c o 4 3D radiation pattern of typical dipole antenna. FCC granted UWB transceiver General Atomics: AEVK-1 Wisair: DV9100 T D K UWB transceiver testing requires measurements spanning wide frequency and dynamic ranges. TDK provides FCC compliance testing using specialized instrumentation and an optimized facility to provide test reports. D i s c o Antenna performance is an important part of the UWB solution. TDK performs antenna analysis for high performance Certified Wireless USB transceiver development. v e WWW.TDK.COM 17 r T D K TDK RF Components for UWB Applications TDK Balanced Antenna for Use in UWB Applications TDK has developed a multilayer chip antenna with a patented balanced radiator structure. The antenna's unique structure allows it to maintain similar performance regardless of ground plane size. Unlike monopole antennas, which are dependent on ground plane size, this antenna has been designed for ease of integration in various applications without the worry of complex board re-designs. It is ideal for use in CardBus, CompactFlash or USB designs. There is a significant difference in ground plane size but almost no difference in VSWR results. The antenna bandwidth is not detuned by changing the ground plane size. RF Components for WLAN Applications 2.4GHz Band Pass Filter Start Frequency MHz 2400 2400 2400 2400 2400 2400 2400 2400 2400 2400 2400 2400 2400 2400 2400 2400 2300 Stop Frequency MHz 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 Ins. Loss dB (MAX) 1.2 1.5 2.1 3.0 3.0 2.5 1.5 1.5 3.2 2.5 2.6 3.0 2.0 2.2 2.0 2.5 1.4 Attenuation (MIN.) MHz 915 915 915 960 960 915 1900 1300 800 915 960 915 915 960 915 915 915 dB 35 35 45 50 50 47 30 25 40 40 40 32 25 25 25 25 35 MHz 1785 1750 1990 1585 1585 1710 dB 35 30 48 50 50 47 MHz 1910 2100 2170 1990 1880 2170 dB 35 20 20 48 40 35 MHz 4800 4800 4800 2170 1990 4800 dB 30 23 30 22 40 30 2000 1910 1710 1710 1250 1710 1600 1710 1710 1785 10 35 40 40 30 25 15 20 20 35 3000 2170 1910 2170 1900 1910 3200 1910 1910 1910 12 23 40 20 30 25 22 20 20 35 3600 4800 4800 4800 4800 4800 4800 4800 4800 4800 30 25 30 30 25 20 25 20 25 30 Size mm (typ.) Part No. DEA252450BT-2027A1 DEA252450BT-2031A1 DEA252450BT-2024C1 DEA252450BT-2024C2 DEA252450BT-2024D4 DEA252450BT-2063C1 DEA202450BT-1251A1 DEA202450BT-1213C1 DEA202450BT-2068A1 DEA202450BT-3201B2 DEA202450BT-2038A1 DEA162450BT-1210A1 DEA162450BT-1241A1 DEA162450BT-1260B2 DEA162450BT-1247B1 DEA162450BT-1247C1 DEA252400BT-2030A1 2.5x2.0x0.95 2.5x2.0x0.95 2.5x2.0x0.95 2.5x2.0x0.95 2.5x2.0x0.95 2.5x2.0x0.95 2.0x1.25x0.95 2.0x1.25x0.95 2.0x1.25x0.70 2.0x1.25x0.70 2.0x1.25x0.95 1.6x0.8x0.60 1.6x0.8x0.60 1.6x0.8x0.60 1.6x0.8x0.55 1.6x0.8x0.55 2.5x2.0x0.95 2.4GHz Low Pass Filter Start Frequency MHz 2400 Stop Frequency MHz 2500 2300 2500 Attenuation (MIN.) Ins. Loss dB (MAX) MHz dB MHz dB MHz dB Size mm (typ.) Part No. 0.42 4800 25 5000 25 7200 18 1.6X0.8X0.6 DEA162500LT-1212A1 0.48 4800 35 5000 35 7200 25 1.6X0.8X0.6 DEA162500LT-1217A1 Ins. Loss dB (MAX) MHz dB MHz dB MHz dB Size mm (typ.) Part No. 0.75 920 25 1790 17 1915 20 2.0X1.2X1.0 DEA202484HT-8002A1 1.4 920 25 1790 18 1915 18 1.6X0.8X0.6 DEA162400HT-8004B1 2.4GHz High Pass Filter Electrical Specifications Parameter Operation Frequency Polarization Antenna Gain Impedance VSWR Value Unit 3.1--5.2 Linear (Mixed) 2.0 (typ.) 50 3 (Max) GHz None dBi ohm None Start Frequency MHz 2400 Stop Frequency MHz 2484 2400 2500 Attenuation (MIN.) Sample Specification : DEA252450BT-2024C2 Radiation Patterns Electrical Characteristics at 25deg C Contact TDK for full spec sheets and application notes D i s c o v e WWW.TDK.COM 16 r T D K D No. Parameter Freq. (MHz) 1 2 3 4 5 6 7 Insertion Loss Return Loss Attenuation Attenuation Attenuation Attenuation Attenuation 2400-2480 2400-2480 880-960 1565-1585 1710-1880 1930-1990 2110-2170 i s c Specification Min. Max. TYP -- 3.0 2.29 10.0 -- 13.7 50.0 -- 53.8 50.0 -- 54.7 48.0 -- 58.3 48.0 -- 65.5 22.0 -- 33.6 o Unit dB dB dB dB dB dB dB v e WWW.TDK.COM 5 r T D K TDK RF Components for UWB Applications RF Components for WLAN Applications TDK BAND PASS FILTERS FOR UWB APPLICATIONS 5GHz Multilayer Band Pass Filter Start Frequency MHz 5150 Stop Frequency MHz 5900 5150 5900 4900 Attenuation (MIN.) Ins. Loss dB (MAX) MHz dB 2.2 3450 1.5 3450 5950 1.5 3450 25 9800 17 4900 5950 2.0 3300 40 4000 25 7300 4900 4940 5850 5850 1.2 3.5 824 2700 50 40 1910 4650 50 20 TDK Band Pass Filters for UWB are available in a performance and a reduced footprint version. The performance version is for applications requiring maximum attenuation at 2.4GHz and 5GHz applications. Reduced footprint series is for applications requiring minimum attenuation. Size mm (typ.) Part No. 35 1.6X0.8X0.6 DEA165487BT-1202 35 2.0X1.2X0.9 DEA205437BT-1200 2.0X1.2X0.9 DEA205425BT-1209B2 14 2.0X1.2X0.95 DEA205425BT-2028A4 9800 7250 15 30 2.5X2.0X0.9 2.5X2.0X1.0 DEA255375BT-2076A1 DEA255395BT-2065D2 Size mm (typ.) Part No. 1.6X0.8X0.8 1.6X0.8X0.8 DEA165725LT-1196A2 DEA165850LT-1197B2 MHz dB MHz dB DEA-3002B1 DEA-3015B1 WiMedia Band Group WiMedia Band Group 3 5GHz Low Pass Filter Start Frequency MHz 5125 4900 Stop Frequency MHz 5725 5950 Attenuation (MIN.) Ins. Loss dB (MAX) MHz dB MHz dB MHz dB 1.5 0.7 6800 9800 12 20 10250 11900 25 30 11450 25 [MECHANICAL DIMENSIONS] 5GHz Balanced Output Band Pass Filter Start Frequency MHz 4900 Stop Frequency MHz 5950 Attenuation (MIN.) Ins. Loss dB (MAX) Bal. Imped. ohm MHz dB MHz dB Size mm (typ.) Part No. 2.8 100 4000 30 8000 20 2.0X1.5X1.3 DEA215425BT-7075C2 Sample Specification : DEA255425BT-2028A4 Electrical Characteristics at 25deg C No. Parameter Specification Min. Max. TYP -- -- -- -- 1.6 2.0 Freq. (MHz) 1 Center Frequency 5425 2 Insertion Loss 4900-5950 Insertion Loss 3 4900-5950 -40 ~ +85 C 4 Return Loss 4900-5950 5 Attenuation 1280-3300 6 Attenuation 3300-4000 7 Attenuation 4375-4465 8 Attenuation 7300-8930 9 Attenuation 9800-11900 Unit -- dB -- 1.9 2.3 dB 9 40 25 7 14 25 11 50 33 12 18 38 -- -- -- -- -- -- dB dB dB dB dB dB UWB-Typical Data (De-embedded) 0 -10 Gain(dB) -20 -30 -40 -50 -60 500 1500 2500 3500 4500 5500 6500 7500 8500 9500 Frquency (MHz) Please contact TDK for full spec sheets and application notes. D i s c o v e WWW.TDK.COM 6 r T D K D i s c o v e WWW.TDK.COM 15 r T D K TDK Services for UWB Wireless Systems TDK brings together various technologies required to develop and manufacture advanced wireless products, systems and equipment. TDK provides key building blocks necessary to bring Wireless USB and other Ultra Wide Band products to market. TDK components & services for UWB Technology include: Antennas Baluns Band Pass Filters Diplexers EMI Filters Test Systems & Services Anechoic Chambers Inductors & Capacitors Standard RF Components Line-up for UWB: Band Item Size (mm) Impedance Pass Band (MHz) Insertion Loss 2.0x1.25 t=1.05 MAX 50/100 ohm 3100-4900 2.0x1.25 t=1.05 MAX 50/100 ohm 1.6x0.8 t=0.7 MAX Attenuation (typ.) TDK Part No. 2450MHz 5150MHz 7000MHz 1.0dB MAX --- --- --- HHM1583B1 3100-4900 1.0dB MAX --- --- --- HHM1596A1 50/100 ohm 3100-4900 1.2dB MAX --- --- --- HHM1775B1 4.5x3.2 t=0.9 MAX 50/50ohm 3168-4752 1.7dB MAX 45dB 28dB 32dB DEA453960BT-3002B1 4.5x3.2 t=0.9 MAX 50/50ohm 3168-4752 1.9dB MAX 48dB 19dB 33dB DEA453960BT-3007B1 3.2x2.5 t=0.85 MAX 50/50ohm 3168-4752 1.7dB typ. 25dB 25dB 32dB DEA323960BT-3008A3 2.0x1.25 t=0.8 MAX 50/50ohm 3168-4752 2.2dB typ. 16dB 21dB 32dB DEA203960BT-3016A1 Balance BPF 2.5x2.0 t=1.0 MAX 50/100ohm 3168-4752 3.5dB typ. 24dB 7dB 20dB DEA253960BT-7113A1 BPF 2.0x1.25 t=1.0 MAX 50/50ohm 4224-4752 1.5dB typ. 50dB 15dB 30dB DEA204488BT-3012A1 Balance BPF 2.5x2.0 t=1.0 MAX 50/100ohm 4224-4752 2.6dB typ. 46dB 28dB 40dB DEA254488BT-7114A1 RF Components for WLAN Applications 2.4GHz Balun Transformers Start Frequency Stop Frequency MHz MHz 2400 2400 2400 2400 2300 2300 2300 2300 2400 2400 2400 2400 2400 2400 2400 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 Ins. Loss dB (MAX) Bal. Imped. Ohm Amp. Bal. dB R. Loss dB Phase Bal. Deg. (MAX) (MIN) 1.2 1.0 1.0 1.0 1.2 1.0 1.0 1.1 1.2 1.2 1.2 1.2 1.0 1.0 1.0 50 75 100 200 50 75 100 200 50 100 150 200 50 100 75 0 2.0 0 1.5 0 2.0 0 2.0 0 2.0 0 2.0 0 2.0 0 2.0 0 2.0 0 2.0 0 2.0 0 1.7 0 2.0 0 2.0 0 2.0 180 10 180 10 180 10 180 10 180 10 180 10 180 10 180 10 180 10 180 10 180 10 180 10 180 10 180 10 180 10 Ins. Loss dB (MAX) Bal. Imped. ohm Amp. Bal dB (MAX) Phase Bal Deg Size mm (typ.) 10 10 10 10 10 10 10 9.5 10 10 10 10 10 10 10 Size mm (typ) Part No. 2.0x1.25x0.95 2.0x1.25x0.95 2.0x1.25x0.95 2.0x1.25x0.95 2.0x1.25x0.95 2.0x1.25x0.95 2.0x1.25x0.95 2.0x1.25x0.95 1.6x0.8x0.6 1.6x0.8x0.6 1.6x0.8x0.6 1.6x0.8x0.6 1.0x0.5x0.45 1.0x0.5x0.45 1.0x0.5x0.45 HHM1517 HHM1541E1 HHM1520 HHM1521 HHM1517A2 HHM1541E2 HHM1520A2 HHM1521A2 HHM1710D1 HHM1711D1 HHM1712D1 HHM1713E2 HHM1902A1 HHM1903A1 HHM1904A1 5GHz Balun Transformers Balun Band1-3 (3168-4752MHz) BPF Band3 (4224-4752MHz) Balun 2.0x1.25 t=1.05 MAX 50/100 ohm 3000-8000 1.5dB MAX --- --- --- HHM1595A1 Band6-9 (6336-7920MHz) BPF 3.2x2.5 t=1.3 MAX 50/50ohm 6336-7920 2.3dB typ. 53dB 32dB --- DEA327128BT-3015B1 Band8-10 (7250-9000MHz) Balance BPF 2.5x2.0 t=1.0 MAX 50/100 ohm 7250-9000 2.5dB typ 45dB 45dB --- DEA258125BT-7096C1 1.1dB MAX(L) 1.2dB MAX(H) 25dB 30dB --- DPX204752DT-4028A1 WLAN+Band1-3 (3168-4752MHz) DPX 2.0x1.25 t=1.05 MAX 50/50 ohm 2300-2500 3168-4752 WLAN+Band1-11 (3168-8976MHz) DPX 2.0x1.25 t=1.05 MAX 50/50 ohm 2300-2500 3168-8976 1.0dB typ. (L) 1.1dB typ. (H) 25dB 40dB --- DPX204752DT-4040B1 Band1-3+Band7-11 (3168-4752MHz) (6336-8976MHz) DPX 4.5x3.2 t=1.00 MAX 50/50 ohm 3168-4752 6336-8976 2.8dB MAX(L) 3.3dB MAX(H) 30dB 15dB --- DPX458976DT-0010A1 i Stop Frequency MHz 5875 1.0 100 2.0 180+/- 10 2.0X1.2X0.95 HHM1562B 4900 5950 1.0 100 2.0 180+/- 10 2.0X1.2X0.95 HHM1570B1 4900 5950 1.2 50 1.0 180+/- 10 1.6X0.8X0.6 HHM1733B1 4900 5950 1.0 100 2.0 180+/- 10 1.6X0.8X0.6 HHM1732B1 4900 5950 1.2 200 1.5 180+/- 10 1.6X0.8X0.6 HHM1752A2 Part No. 2.4GHz Coupler and Coupler with LPF Band1-8 (3168-7656MHz) D Start Frequency MHz 5150 s c o v e WWW.TDK.COM 14 r T D K Start Frequency MHz 2400 Stop Frequency MHz 2500 0.74 10.5 1.0 23 2400 2500 0.45 12.0 1.0 22 2400 2400 2500 2500 0.45 0.40 13.0 1.0 14.5 1.0 2400 2500 0.35 2400 2400 2500 2500 0.35 0.30 2400 2500 0.35 D i s Ins. Loss Isolation Coupling dB dB (MAX) (MIN) VSWR (MAX) Att. (MIN.) Size mm (typ.) Part No. 1.4 MHz - dB - MHz - dB - 1.6x0.8x0.6 HHM2240SA1 1.5 - - - - 1.6x0.8x0.6 HHM2241SA1 25 25 1.5 1.7 - - - - 1.6x0.8x0.6 1.6x0.8x0.6 HHM2242SA1 HHM2243SA1 16.0 1.0 25 1.3 - - - - 1.6x0.8x0.6 HHM2245SA1 17.0 1.0 20.0 1.0 30 38 1.3 1.3 - - - - 1.6x0.8x0.6 1.6x0.8x0.6 HHM2246SA1 HHM2244SA1 20.0 1.0 25 1.4 4800-5000 20 7200-7500 20 2.0x1.25x0.95 HHM2618A1 c o v e WWW.TDK.COM 7 r T D K RF Components for Bluetooth Applications TDK RF components can be used in different architectures (see Example 1 & 2). Please refer to page 5 for 2.4GHz BPF information and page 7 for 2.4GHz balun information. TDK RF Components are recommended by leading Bluetooth chipset manufacturers. TDK RF Components for GPS Applications TDK has developed a new series of RF components for use in GPS systems. In addition to the components listed below TDK has a variety of Antennas for use in GPS Applications. Insertion Loss ITEM BPF size Band Pass Filter 4.3x4.9x2.1max Low band (Low Pass Filter) High band (High Pass Filter) Low band (Low Pass Filter) TDK has designed a series of Balanced Output BPF's that are optimized to match the impedance requirements of Bluetooth IC's. Diplexer High band (High Pass Filter) Balanced impedance is optimized to match IC ANT Low band (Low Pass Filter) High band (High Pass Filter) Low band (Low Pass Filter) High band (High Pass Filter) Balanced output BPF Switch BPF Transceiver Balun High band (High Pass Filter) Low band (Low Pass Filter) High band (High Pass Filter) Low band (Low Pass Filter) Base band dB Attenuation Return Loss System Part No. 1573.42-1577.42 GPS CF61A7301B 10min 824-894 CDMA800 Tx/Rx 20min 1574-1576 1850-1990 10min 1574-1576 1850-1990 GPS + CDMA1900 Tx/Rx 16min 18min 14min 5min 1575 1612-1648 1792-1856 2000-3000 14min 806-941 iDEN MHz dB MHz dB MHz 3.5max 1573.42-1577.42 21min 20min 30min 30min 35min 50min 1525.42 1625.42 1475.42 1675.42 1710-1785 1850-1910 9.54min 0.65max 824-894 20min 824-894 0.70max 1574-1576 1850-1990 806-941 2.0x1.25x1.05max 0.60max 1.6x0.8x0.7max DPX201990DT-4012A1 DPX161576DT-8011B1 0.70max 1574.42-1576.42 20min 806-928 14min 1574.421576.42 GPS 0.73typ 1565-1585 21.7typ 2400-2500 15.3typ 1565-1585 GPS 0.87typ 2400-2500 32.7typ 1565-1585 15.1typ 2400-2500 Bluetooth 0.73typ 1574-1576 22.3typ 2402-2480 17.3typ 1574-1576 GPS 0.85typ 2402-2480 20.7typ 20.6typ 33.2typ 6.3typ 824-894 880-960 1574-1576 1710-1880 14.0typ 2402-2480 Bluetooth 0.72typ 1565-1585 23.4typ 2110-2170 20.5typ 1565-1585 GPS 1.6x0.8x0.7max DPX162500DT-8014A1 1.6x0.8x0.7max DPX162500DT-8014B2 1.6x0.8x0.7max DPX162170DT-8015A1 0.86typ 2110-2170 21.6typ 1565-1585 12.0typ 2110-2170 UMTS(BC1) Rx 0.84typ 1565-1585 24.6typ 2110-2170 15.8typ 1565-1585 GPS 1.6x0.8x0.7max DPX162170DT-8016A1 1.22typ 2110-2170 32.0typ 1565-1585 14.9typ 2110-2170 UMTS(BC1) Rx Please Contact TDK for more information. D i s c o v e WWW.TDK.COM 8 r T D K D i s c o v e WWW.TDK.COM 13 r T D K TDK RF Components for WiMAX Applications RF Components for Bluetooth Applications Ceramic Block Band Pass Filter for 700MHz, 2.3GHz, 2.5GHz, 2.5GHz & 3.5GHz Start Frequency MHz 700 2490 3230 3390 3590 Stop Frequency MHz 750 2710 3410 3660 3810 Ins. Loss dB (MAX) 2.2 1.2 1.2 1.2 1.2 MHz 650 1800 1800 1800 1800 dB 30 44 56 58 58 Att. (MIN.) MHz 800 3400 2462 2462 2462 dB 25 42 45 45 45 MHz 1000 4400 4400 4400 4400 dB 40 38 37 40 48 MULTILAYER Band Pass Filter (Balance output Type) Size mm (typ.) Part No. 13.2x10x3.6 8.0x3.0x3.5 8.0x3.0x3.5 8.0x3.0x3.5 8.0x3.0x3.5 S0465D S0486A S0486B S0486C S0486D P/N: DEA 252450BT-7022B1 For Bluetooth and 2.4Ghz W-LAN MECHANICAL DIMENSIONS Ins. Loss dB (MAX) Isolation dB (MIN) V.S.W.R. Z0=50ohm (Max) Max. Handling Power (W) Size mm (typ.) 2500 - 2700 0.40 20 1.3 100 (Ave) 20x20x8.5 CU1S2001AC-2600 2500 - 2700 0.35 18 1.3 100 (Ave) 19x19x8.0 CU1L1905AC-2600 2500 - 2700 0.35 18 1.3 100 (Ave) 19x25.4x8.0 CU1L1905AT-2600 2500 - 2700 0.80 10 1.6 2.5 5.0x5.0x1.9 CU452A1F-2600-1TE2 3400 - 3600 0.55 18 1.3 100 (Ave) 20x20x8.5 CU1S2001AC-3500 3400 - 3600 0.35 18 1.3 100 (Ave) 19x19x8.0 CU1L1905AC-3500 3400 - 3600 0.35 18 1.3 100 (Ave) 19x25.4x8.0 CU1L1905AT-3500 3400 - 3600 1.00 10 1.8 2.5 5.0x5.0x1.9 CU452A1F-3500-1TE2 Part No. Ripple (Pass Band) 880-960MHz 1710-1880MHz 1880-1980MHz Attenuation 2110-2170MHz 4800-5000MHz Amplitude Impedance at Balanced Port +25C Phase Differences at Balanced Port -40 -- +85C Front-End Modules for 802.16e Mobile WiMAX Applications TDK is developing a series of front end modules for use in mobile WiMAX applications. TDK is working with the leading WiMAX RF IC manufacturers to match the FEM's to the transceiver. Please contact TDK for full specifications. * Operating Frequency: 2.5 to 2.7 GHz, 2.3GHz and 3.5GHz * Versions with and without Integrated Output Power Detector * 50 W Matched RF Ports * Low Profile LGA Package : 5.0 x 5.6 x 1.1 mm * Supports 1X2 (1 TX & 2 RX) Configuration * Multi-Chip Technology: Integrated Power Amplifier and T/R Switch * Utilizes TDK's LTCC Technology to embed all required filtering D i s c o v e WWW.TDK.COM 12 r Parameter Specification Typical Value Unit Frequency Range (Pass Band) 2400-2500 -- MHz Unbalanced Port Characteristics Impedance 50 (nominal) -- Balanced Port Characteristics Impedance 100 (nominal) -- Unbalanced Port Return Loss 9.5 min -- dB +25C 3.0 max 2.7 dB Insertion Loss (Pass Band) -40 -- +85C 3.0 max 3.0 dB PIN CONFIGURATION PIN ASSIGNMENT PIN No. Unbalanced 1 Balanced 4,5 GND 3,6 DC feed or RF GND 2 Circulators for 2.3GHz, 2.5GHz, 2.5GHz & 3.5GHz Freq. range MHz Electrical Characteristics Top View 1.0 max 48 min 45 min 40 min 25 min 30 min 1.0 max 1808 18010 0.2 52 51 54 33 38 -0.2 183 -- dB dB dB dB dB dB dB Deg Deg 2.4GHz Balanced Output Band Pass Filters Start Stop Bal. imped. Ins. Loss FreFrequency quency ohm dB (MAX) MHz MHz MHz 2400 2500 50 2.4 1710 T D K Attenuation (MIN.) Return Amp. bal. Phase bal. Loss dB dB (MAX) deg (MIN) Size mm (typ.) Part No. dB MHz dB MHz dB 25 1920 25 4800 15 0 2.0 180 20 10 2.5x2.0x0.95 DEA252450BT-7001B1 2400 2500 50 1.7 1710 32 1910 32 4800 30 0 1.0 180 15 10 2.5x2.0x0.95 DEA252450BT-7014D1 2400 2500 100 1.9 1710 32 1910 32 4800 30 0 1.0 180 12 10 2.5x2.0x0.95 DEA252450BT-7012D1 2400 2500 100 3.0 1710 45 2170 25 4800 30 0 1.0 180 8 9.5 2.5x2.0x0.95 DEA252450BT-7022B1 2400 2500 CSR BC3 3.3 1710 48 2170 30 4800 25 0 1.0 180 8 8.0 2.5x2.0x0.95 DEA252450BT-7035B2 2402 2480 Infineon 3.5 1710 40 2170 30 4804 30 0 1.5 180 10 9.0 2.5x2.0x0.95 DEA252441BT-7053D2 2400 2500 50 2.7 1710 33 1910 37 2170 10 0 1.5 180 15 10 2.0x1.5x0.95 DEA212450BT-7031A1 2400 2500 ST STLC2500 3.6 1710 28 2170 17 4800 15 0 2.0 180 10 10 2.0x1.5x0.95 DEA212450BT-7043C1 2400 2500 50 2.0 1710 25 4800 25 7200 15 0 1.5 180 15 9.0 2.0x1.25x0.95 DEA202450BT-7116E1 2400 2500 100 3.5 1710 35 2170 25 0 1.0 180 10 10.0 2.0x1.25x0.75 DEA202450BT-7054B1 2402 2480 CSR BC4 2.0x1.25x0.65 DEA202450BT-7041E1 2402 2480 CSR BC4 & 5 3.0 1710 22 1910 20 4804 18 0 2.0 180 10 8.5 2.0x1.25x0.7 DEA202450BT-7099A1 2402 2480 CSR BC4 & 6 3.0 1710 22 1910 20 4804 18 0 2.0 180 10 8.5 2.0x1.25x0.7 DEA202450BT-7118A1 2400 2500 CSR BC3 3.5 1710 38 2170 17 4800 25 0 1.0 180 10 9.0 2.0x1.25x0.95 DEA202450BT-7077A1 2400 2500 ST STLC2500 3.4 1710 39 2168 20 4800 26 0 2.0 180 10 8.5 2.0x1.25x0.92 DEA202450BT-7089C3 2402 2480 ST STLC2500 2.0 1700 20 2000 15 7206 25 0 2.0 180+15/-10 7.0 2.0x1.25x0.92 DEA202450BT-7081A1 2402 2480 ST STLC2500 2.5 1710 40 1910 40 4800 25 0 2.0 180 10 9.0 2.0x1.25x0.92 DEA202450BT-7112B1 D i Match to CSR BC4 s c o v e WWW.TDK.COM 9 r T D K TDK RF Components for WiMAX Applications TDK's newest line-up of RF Components for WiMAX applications can be used in both client and base station designs. These components have been developed to work in the 2.3GHz, 2.5GHz, 3.5GHz and 700MHz bands. TDK RF Components for WiMAX Applications Balun Transformers for 2.3GHz, 2.5GHz, 3.5GHz Start Frequency MHz 2300 Stop Frequency MHz 2700 2300 2500 Ins. Loss dB (MAX) Bal. Imped. ohm Amp. Bal dB (MAX) Phase Bal Deg Size mm (typ.) Part No. 1.2 50 1.5 180+/- 10 1.6X0.8X0.6 HHM1710J1 2700 1.2 100 1.5 180+/- 12 1.6X0.8X0.6 HHM1711E1 2700 0.8 100 2.2 180+/- 10 1.6X0.8X0.6 HHM1711K1 2500 2700 0.8 100 2.2 180+/- 10 1.6X0.8X0.6 HHM1791A1 3300 3300 3900 3900 1.2 1.0 50 75 1.5 1.2 180+/- 15 180+/- 15 1.6X0.8X0.6 1.6X0.8X0.6 HHM1727D1 HHM1715E1 Multilayer Ceramic Band Pass Filter Start Stop Frequency Frequency MHz MHz Att. (MIN.) Ins. Loss dB (MAX) MHz dB MHz dB MHz dB 2300 2690 1.8 1800 14 3400 14 11700 14 2401 2690 3.3 1580 35 1980 30 2170 10 2496 2690 2.5 2125 18 2313 18 2992 12 2500 2700 2.2 915 25 1785 25 1980 15 3300 3900 2.2 2600 15 4400 10 6000 25 MHz dB 4802 25 4900 15 Size mm (typ.) Part No. 2.0x1.25x0.95 DEA202495BT-1242B2 2.5x2.0x0.95 DEA252546BT-2083B2 2.5x2.0x0.95 DEA252593BT-2074A3 1.6x0.8x0.65 DEA162600BT-1258C2 2.0x1.25x0.95 DEA203600BT-1240B2 Size Part No. Low Pass Filter Start Frequency MHz Stop Frequency MHz 2300 2400 3400 Att. (MIN.) Ins. Loss dB (MAX) MHz dB MHz dB 2690 0.8 4600 25 6900 25 1.6x0.8x0.6 DEA162690LT-1217A2 2700 0.35 4800 26 7200 23 1.6x0.8x0.6 DEA162700LT-5014A1 3600 0.5 6800 26 7200 26 1.6x0.8x0.6 DEA163600LT-5017A1 Balanced Output Band Pass Filter Start Frequency MHz Couplers for 2.3GHz, 2.5GHz & 3.5GHz Start Frequency MHz Stop Frequency MHz Ins. Loss dB (MAX) Coupling dB Isolation dB V.S.W.R Size mm (typ.) Part No. 2300 2700 0.55 -12 +/- 1.5 20 Min. 1.5 1.6X0.8X0.6 HHM2241SA3 2300 2700 0.40 -20 +/- 1.5 32 Min. 1.3 1.6X0.8X0.6 HHM2244SA7 2300 2700 0.40 -16 +/- 1.5 25 Min. 1.3 1.6X0.8X0.6 HHM2245SA3 3400 3600 0.35 -18 +/- 1.5 23 Min. 1.3 1.6X0.8X0.6 HHM2261SA1 i s c o v e WWW.TDK.COM 10 r T Bal. imped. ohm Attenuation (MIN.) MHz dB MHz dB MHz dB Size mm (typ.) Part No. 2300 2690 2.8 50 960 35 1980 10 4900 30 2.0x1.5x0.95 DEA212495BT-7055A2 2500 2700 3.5 100 960 42 1990 35 2170 25 2.5x2.0x0.95 DEA252600BT-7098A2 Diplexer Start FreStop Ins. Loss quency Range Frequency dB (MAX) MHz 1 MHz Range 1 MHz 2300 D Stop Ins. Loss Frequency dB (MAX) MHZ D K D 2690 i 1.6 s 3300 Att. (MIN.) dB MHz Att. (MIN.) Start Stop Ins. Loss Frequency Frequency dB (MAX) dB Range 2 MHz Range 2 MHz MHz dB MHz dB 16 4600 25 c o 3300 3900 v e WWW.TDK.COM 11 1.6 2690 r 16 6600 9 Size mm (typ.) Part No. 2.0x1.25x0.60 DPX203900DT-9019A1 T D K TDK RF Components for WiMAX Applications TDK's newest line-up of RF Components for WiMAX applications can be used in both client and base station designs. These components have been developed to work in the 2.3GHz, 2.5GHz, 3.5GHz and 700MHz bands. TDK RF Components for WiMAX Applications Balun Transformers for 2.3GHz, 2.5GHz, 3.5GHz Start Frequency MHz 2300 Stop Frequency MHz 2700 2300 2500 Ins. Loss dB (MAX) Bal. Imped. ohm Amp. Bal dB (MAX) Phase Bal Deg Size mm (typ.) Part No. 1.2 50 1.5 180+/- 10 1.6X0.8X0.6 HHM1710J1 2700 1.2 100 1.5 180+/- 12 1.6X0.8X0.6 HHM1711E1 2700 0.8 100 2.2 180+/- 10 1.6X0.8X0.6 HHM1711K1 2500 2700 0.8 100 2.2 180+/- 10 1.6X0.8X0.6 HHM1791A1 3300 3300 3900 3900 1.2 1.0 50 75 1.5 1.2 180+/- 15 180+/- 15 1.6X0.8X0.6 1.6X0.8X0.6 HHM1727D1 HHM1715E1 Multilayer Ceramic Band Pass Filter Start Stop Frequency Frequency MHz MHz Att. (MIN.) Ins. Loss dB (MAX) MHz dB MHz dB MHz dB 2300 2690 1.8 1800 14 3400 14 11700 14 2401 2690 3.3 1580 35 1980 30 2170 10 2496 2690 2.5 2125 18 2313 18 2992 12 2500 2700 2.2 915 25 1785 25 1980 15 3300 3900 2.2 2600 15 4400 10 6000 25 MHz dB 4802 25 4900 15 Size mm (typ.) Part No. 2.0x1.25x0.95 DEA202495BT-1242B2 2.5x2.0x0.95 DEA252546BT-2083B2 2.5x2.0x0.95 DEA252593BT-2074A3 1.6x0.8x0.65 DEA162600BT-1258C2 2.0x1.25x0.95 DEA203600BT-1240B2 Size Part No. Low Pass Filter Start Frequency MHz Stop Frequency MHz 2300 2400 3400 Att. (MIN.) Ins. Loss dB (MAX) MHz dB MHz dB 2690 0.8 4600 25 6900 25 1.6x0.8x0.6 DEA162690LT-1217A2 2700 0.35 4800 26 7200 23 1.6x0.8x0.6 DEA162700LT-5014A1 3600 0.5 6800 26 7200 26 1.6x0.8x0.6 DEA163600LT-5017A1 Balanced Output Band Pass Filter Start Frequency MHz Couplers for 2.3GHz, 2.5GHz & 3.5GHz Start Frequency MHz Stop Frequency MHz Ins. Loss dB (MAX) Coupling dB Isolation dB V.S.W.R Size mm (typ.) Part No. 2300 2700 0.55 -12 +/- 1.5 20 Min. 1.5 1.6X0.8X0.6 HHM2241SA3 2300 2700 0.40 -20 +/- 1.5 32 Min. 1.3 1.6X0.8X0.6 HHM2244SA7 2300 2700 0.40 -16 +/- 1.5 25 Min. 1.3 1.6X0.8X0.6 HHM2245SA3 3400 3600 0.35 -18 +/- 1.5 23 Min. 1.3 1.6X0.8X0.6 HHM2261SA1 i s c o v e WWW.TDK.COM 10 r T Bal. imped. ohm Attenuation (MIN.) MHz dB MHz dB MHz dB Size mm (typ.) Part No. 2300 2690 2.8 50 960 35 1980 10 4900 30 2.0x1.5x0.95 DEA212495BT-7055A2 2500 2700 3.5 100 960 42 1990 35 2170 25 2.5x2.0x0.95 DEA252600BT-7098A2 Diplexer Start FreStop Ins. Loss quency Range Frequency dB (MAX) MHz 1 MHz Range 1 MHz 2300 D Stop Ins. Loss Frequency dB (MAX) MHZ D K D 2690 i 1.6 s 3300 Att. (MIN.) dB MHz Att. (MIN.) Start Stop Ins. Loss Frequency Frequency dB (MAX) dB Range 2 MHz Range 2 MHz MHz dB MHz dB 16 4600 25 c o 3300 3900 v e WWW.TDK.COM 11 1.6 2690 r 16 6600 9 Size mm (typ.) Part No. 2.0x1.25x0.60 DPX203900DT-9019A1 T D K TDK RF Components for WiMAX Applications RF Components for Bluetooth Applications Ceramic Block Band Pass Filter for 700MHz, 2.3GHz, 2.5GHz, 2.5GHz & 3.5GHz Start Frequency MHz 700 2490 3230 3390 3590 Stop Frequency MHz 750 2710 3410 3660 3810 Ins. Loss dB (MAX) 2.2 1.2 1.2 1.2 1.2 MHz 650 1800 1800 1800 1800 dB 30 44 56 58 58 Att. (MIN.) MHz 800 3400 2462 2462 2462 dB 25 42 45 45 45 MHz 1000 4400 4400 4400 4400 dB 40 38 37 40 48 MULTILAYER Band Pass Filter (Balance output Type) Size mm (typ.) Part No. 13.2x10x3.6 8.0x3.0x3.5 8.0x3.0x3.5 8.0x3.0x3.5 8.0x3.0x3.5 S0465D S0486A S0486B S0486C S0486D P/N: DEA 252450BT-7022B1 For Bluetooth and 2.4Ghz W-LAN MECHANICAL DIMENSIONS Ins. Loss dB (MAX) Isolation dB (MIN) V.S.W.R. Z0=50ohm (Max) Max. Handling Power (W) Size mm (typ.) 2500 - 2700 0.40 20 1.3 100 (Ave) 20x20x8.5 CU1S2001AC-2600 2500 - 2700 0.35 18 1.3 100 (Ave) 19x19x8.0 CU1L1905AC-2600 2500 - 2700 0.35 18 1.3 100 (Ave) 19x25.4x8.0 CU1L1905AT-2600 2500 - 2700 0.80 10 1.6 2.5 5.0x5.0x1.9 CU452A1F-2600-1TE2 3400 - 3600 0.55 18 1.3 100 (Ave) 20x20x8.5 CU1S2001AC-3500 3400 - 3600 0.35 18 1.3 100 (Ave) 19x19x8.0 CU1L1905AC-3500 3400 - 3600 0.35 18 1.3 100 (Ave) 19x25.4x8.0 CU1L1905AT-3500 3400 - 3600 1.00 10 1.8 2.5 5.0x5.0x1.9 CU452A1F-3500-1TE2 Part No. Ripple (Pass Band) 880-960MHz 1710-1880MHz 1880-1980MHz Attenuation 2110-2170MHz 4800-5000MHz Amplitude Impedance at Balanced Port +25C Phase Differences at Balanced Port -40 -- +85C Front-End Modules for 802.16e Mobile WiMAX Applications TDK is developing a series of front end modules for use in mobile WiMAX applications. TDK is working with the leading WiMAX RF IC manufacturers to match the FEM's to the transceiver. Please contact TDK for full specifications. * Operating Frequency: 2.5 to 2.7 GHz, 2.3GHz and 3.5GHz * Versions with and without Integrated Output Power Detector * 50 W Matched RF Ports * Low Profile LGA Package : 5.0 x 5.6 x 1.1 mm * Supports 1X2 (1 TX & 2 RX) Configuration * Multi-Chip Technology: Integrated Power Amplifier and T/R Switch * Utilizes TDK's LTCC Technology to embed all required filtering D i s c o v e WWW.TDK.COM 12 r Parameter Specification Typical Value Unit Frequency Range (Pass Band) 2400-2500 -- MHz Unbalanced Port Characteristics Impedance 50 (nominal) -- Balanced Port Characteristics Impedance 100 (nominal) -- Unbalanced Port Return Loss 9.5 min -- dB +25C 3.0 max 2.7 dB Insertion Loss (Pass Band) -40 -- +85C 3.0 max 3.0 dB PIN CONFIGURATION PIN ASSIGNMENT PIN No. Unbalanced 1 Balanced 4,5 GND 3,6 DC feed or RF GND 2 Circulators for 2.3GHz, 2.5GHz, 2.5GHz & 3.5GHz Freq. range MHz Electrical Characteristics Top View 1.0 max 48 min 45 min 40 min 25 min 30 min 1.0 max 1808 18010 0.2 52 51 54 33 38 -0.2 183 -- dB dB dB dB dB dB dB Deg Deg 2.4GHz Balanced Output Band Pass Filters Start Stop Bal. imped. Ins. Loss FreFrequency quency ohm dB (MAX) MHz MHz MHz 2400 2500 50 2.4 1710 T D K Attenuation (MIN.) Return Amp. bal. Phase bal. Loss dB dB (MAX) deg (MIN) Size mm (typ.) Part No. dB MHz dB MHz dB 25 1920 25 4800 15 0 2.0 180 20 10 2.5x2.0x0.95 DEA252450BT-7001B1 2400 2500 50 1.7 1710 32 1910 32 4800 30 0 1.0 180 15 10 2.5x2.0x0.95 DEA252450BT-7014D1 2400 2500 100 1.9 1710 32 1910 32 4800 30 0 1.0 180 12 10 2.5x2.0x0.95 DEA252450BT-7012D1 2400 2500 100 3.0 1710 45 2170 25 4800 30 0 1.0 180 8 9.5 2.5x2.0x0.95 DEA252450BT-7022B1 2400 2500 CSR BC3 3.3 1710 48 2170 30 4800 25 0 1.0 180 8 8.0 2.5x2.0x0.95 DEA252450BT-7035B2 2402 2480 Infineon 3.5 1710 40 2170 30 4804 30 0 1.5 180 10 9.0 2.5x2.0x0.95 DEA252441BT-7053D2 2400 2500 50 2.7 1710 33 1910 37 2170 10 0 1.5 180 15 10 2.0x1.5x0.95 DEA212450BT-7031A1 2400 2500 ST STLC2500 3.6 1710 28 2170 17 4800 15 0 2.0 180 10 10 2.0x1.5x0.95 DEA212450BT-7043C1 2400 2500 50 2.0 1710 25 4800 25 7200 15 0 1.5 180 15 9.0 2.0x1.25x0.95 DEA202450BT-7116E1 2400 2500 100 3.5 1710 35 2170 25 0 1.0 180 10 10.0 2.0x1.25x0.75 DEA202450BT-7054B1 2402 2480 CSR BC4 2.0x1.25x0.65 DEA202450BT-7041E1 2402 2480 CSR BC4 & 5 3.0 1710 22 1910 20 4804 18 0 2.0 180 10 8.5 2.0x1.25x0.7 DEA202450BT-7099A1 2402 2480 CSR BC4 & 6 3.0 1710 22 1910 20 4804 18 0 2.0 180 10 8.5 2.0x1.25x0.7 DEA202450BT-7118A1 2400 2500 CSR BC3 3.5 1710 38 2170 17 4800 25 0 1.0 180 10 9.0 2.0x1.25x0.95 DEA202450BT-7077A1 2400 2500 ST STLC2500 3.4 1710 39 2168 20 4800 26 0 2.0 180 10 8.5 2.0x1.25x0.92 DEA202450BT-7089C3 2402 2480 ST STLC2500 2.0 1700 20 2000 15 7206 25 0 2.0 180+15/-10 7.0 2.0x1.25x0.92 DEA202450BT-7081A1 2402 2480 ST STLC2500 2.5 1710 40 1910 40 4800 25 0 2.0 180 10 9.0 2.0x1.25x0.92 DEA202450BT-7112B1 D i Match to CSR BC4 s c o v e WWW.TDK.COM 9 r T D K RF Components for Bluetooth Applications TDK RF components can be used in different architectures (see Example 1 & 2). Please refer to page 5 for 2.4GHz BPF information and page 7 for 2.4GHz balun information. TDK RF Components are recommended by leading Bluetooth chipset manufacturers. TDK RF Components for GPS Applications TDK has developed a new series of RF components for use in GPS systems. In addition to the components listed below TDK has a variety of Antennas for use in GPS Applications. Insertion Loss ITEM BPF size Band Pass Filter 4.3x4.9x2.1max Low band (Low Pass Filter) High band (High Pass Filter) Low band (Low Pass Filter) TDK has designed a series of Balanced Output BPF's that are optimized to match the impedance requirements of Bluetooth IC's. Diplexer High band (High Pass Filter) Balanced impedance is optimized to match IC ANT Low band (Low Pass Filter) High band (High Pass Filter) Low band (Low Pass Filter) High band (High Pass Filter) Balanced output BPF Switch BPF Transceiver Balun High band (High Pass Filter) Low band (Low Pass Filter) High band (High Pass Filter) Low band (Low Pass Filter) Base band dB Attenuation Return Loss System Part No. 1573.42-1577.42 GPS CF61A7301B 10min 824-894 CDMA800 Tx/Rx 20min 1574-1576 1850-1990 10min 1574-1576 1850-1990 GPS + CDMA1900 Tx/Rx 16min 18min 14min 5min 1575 1612-1648 1792-1856 2000-3000 14min 806-941 iDEN MHz dB MHz dB MHz 3.5max 1573.42-1577.42 21min 20min 30min 30min 35min 50min 1525.42 1625.42 1475.42 1675.42 1710-1785 1850-1910 9.54min 0.65max 824-894 20min 824-894 0.70max 1574-1576 1850-1990 806-941 2.0x1.25x1.05max 0.60max 1.6x0.8x0.7max DPX201990DT-4012A1 DPX161576DT-8011B1 0.70max 1574.42-1576.42 20min 806-928 14min 1574.421576.42 GPS 0.73typ 1565-1585 21.7typ 2400-2500 15.3typ 1565-1585 GPS 0.87typ 2400-2500 32.7typ 1565-1585 15.1typ 2400-2500 Bluetooth 0.73typ 1574-1576 22.3typ 2402-2480 17.3typ 1574-1576 GPS 0.85typ 2402-2480 20.7typ 20.6typ 33.2typ 6.3typ 824-894 880-960 1574-1576 1710-1880 14.0typ 2402-2480 Bluetooth 0.72typ 1565-1585 23.4typ 2110-2170 20.5typ 1565-1585 GPS 1.6x0.8x0.7max DPX162500DT-8014A1 1.6x0.8x0.7max DPX162500DT-8014B2 1.6x0.8x0.7max DPX162170DT-8015A1 0.86typ 2110-2170 21.6typ 1565-1585 12.0typ 2110-2170 UMTS(BC1) Rx 0.84typ 1565-1585 24.6typ 2110-2170 15.8typ 1565-1585 GPS 1.6x0.8x0.7max DPX162170DT-8016A1 1.22typ 2110-2170 32.0typ 1565-1585 14.9typ 2110-2170 UMTS(BC1) Rx Please Contact TDK for more information. D i s c o v e WWW.TDK.COM 8 r T D K D i s c o v e WWW.TDK.COM 13 r T D K TDK Services for UWB Wireless Systems TDK brings together various technologies required to develop and manufacture advanced wireless products, systems and equipment. TDK provides key building blocks necessary to bring Wireless USB and other Ultra Wide Band products to market. TDK components & services for UWB Technology include: Antennas Baluns Band Pass Filters Diplexers EMI Filters Test Systems & Services Anechoic Chambers Inductors & Capacitors Standard RF Components Line-up for UWB: Band Item Size (mm) Impedance Pass Band (MHz) Insertion Loss 2.0x1.25 t=1.05 MAX 50/100 ohm 3100-4900 2.0x1.25 t=1.05 MAX 50/100 ohm 1.6x0.8 t=0.7 MAX Attenuation (typ.) TDK Part No. 2450MHz 5150MHz 7000MHz 1.0dB MAX --- --- --- HHM1583B1 3100-4900 1.0dB MAX --- --- --- HHM1596A1 50/100 ohm 3100-4900 1.2dB MAX --- --- --- HHM1775B1 4.5x3.2 t=0.9 MAX 50/50ohm 3168-4752 1.7dB MAX 45dB 28dB 32dB DEA453960BT-3002B1 4.5x3.2 t=0.9 MAX 50/50ohm 3168-4752 1.9dB MAX 48dB 19dB 33dB DEA453960BT-3007B1 3.2x2.5 t=0.85 MAX 50/50ohm 3168-4752 1.7dB typ. 25dB 25dB 32dB DEA323960BT-3008A3 2.0x1.25 t=0.8 MAX 50/50ohm 3168-4752 2.2dB typ. 16dB 21dB 32dB DEA203960BT-3016A1 Balance BPF 2.5x2.0 t=1.0 MAX 50/100ohm 3168-4752 3.5dB typ. 24dB 7dB 20dB DEA253960BT-7113A1 BPF 2.0x1.25 t=1.0 MAX 50/50ohm 4224-4752 1.5dB typ. 50dB 15dB 30dB DEA204488BT-3012A1 Balance BPF 2.5x2.0 t=1.0 MAX 50/100ohm 4224-4752 2.6dB typ. 46dB 28dB 40dB DEA254488BT-7114A1 RF Components for WLAN Applications 2.4GHz Balun Transformers Start Frequency Stop Frequency MHz MHz 2400 2400 2400 2400 2300 2300 2300 2300 2400 2400 2400 2400 2400 2400 2400 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 Ins. Loss dB (MAX) Bal. Imped. Ohm Amp. Bal. dB R. Loss dB Phase Bal. Deg. (MAX) (MIN) 1.2 1.0 1.0 1.0 1.2 1.0 1.0 1.1 1.2 1.2 1.2 1.2 1.0 1.0 1.0 50 75 100 200 50 75 100 200 50 100 150 200 50 100 75 0 2.0 0 1.5 0 2.0 0 2.0 0 2.0 0 2.0 0 2.0 0 2.0 0 2.0 0 2.0 0 2.0 0 1.7 0 2.0 0 2.0 0 2.0 180 10 180 10 180 10 180 10 180 10 180 10 180 10 180 10 180 10 180 10 180 10 180 10 180 10 180 10 180 10 Ins. Loss dB (MAX) Bal. Imped. ohm Amp. Bal dB (MAX) Phase Bal Deg Size mm (typ.) 10 10 10 10 10 10 10 9.5 10 10 10 10 10 10 10 Size mm (typ) Part No. 2.0x1.25x0.95 2.0x1.25x0.95 2.0x1.25x0.95 2.0x1.25x0.95 2.0x1.25x0.95 2.0x1.25x0.95 2.0x1.25x0.95 2.0x1.25x0.95 1.6x0.8x0.6 1.6x0.8x0.6 1.6x0.8x0.6 1.6x0.8x0.6 1.0x0.5x0.45 1.0x0.5x0.45 1.0x0.5x0.45 HHM1517 HHM1541E1 HHM1520 HHM1521 HHM1517A2 HHM1541E2 HHM1520A2 HHM1521A2 HHM1710D1 HHM1711D1 HHM1712D1 HHM1713E2 HHM1902A1 HHM1903A1 HHM1904A1 5GHz Balun Transformers Balun Band1-3 (3168-4752MHz) BPF Band3 (4224-4752MHz) Balun 2.0x1.25 t=1.05 MAX 50/100 ohm 3000-8000 1.5dB MAX --- --- --- HHM1595A1 Band6-9 (6336-7920MHz) BPF 3.2x2.5 t=1.3 MAX 50/50ohm 6336-7920 2.3dB typ. 53dB 32dB --- DEA327128BT-3015B1 Band8-10 (7250-9000MHz) Balance BPF 2.5x2.0 t=1.0 MAX 50/100 ohm 7250-9000 2.5dB typ 45dB 45dB --- DEA258125BT-7096C1 1.1dB MAX(L) 1.2dB MAX(H) 25dB 30dB --- DPX204752DT-4028A1 WLAN+Band1-3 (3168-4752MHz) DPX 2.0x1.25 t=1.05 MAX 50/50 ohm 2300-2500 3168-4752 WLAN+Band1-11 (3168-8976MHz) DPX 2.0x1.25 t=1.05 MAX 50/50 ohm 2300-2500 3168-8976 1.0dB typ. (L) 1.1dB typ. (H) 25dB 40dB --- DPX204752DT-4040B1 Band1-3+Band7-11 (3168-4752MHz) (6336-8976MHz) DPX 4.5x3.2 t=1.00 MAX 50/50 ohm 3168-4752 6336-8976 2.8dB MAX(L) 3.3dB MAX(H) 30dB 15dB --- DPX458976DT-0010A1 i Stop Frequency MHz 5875 1.0 100 2.0 180+/- 10 2.0X1.2X0.95 HHM1562B 4900 5950 1.0 100 2.0 180+/- 10 2.0X1.2X0.95 HHM1570B1 4900 5950 1.2 50 1.0 180+/- 10 1.6X0.8X0.6 HHM1733B1 4900 5950 1.0 100 2.0 180+/- 10 1.6X0.8X0.6 HHM1732B1 4900 5950 1.2 200 1.5 180+/- 10 1.6X0.8X0.6 HHM1752A2 Part No. 2.4GHz Coupler and Coupler with LPF Band1-8 (3168-7656MHz) D Start Frequency MHz 5150 s c o v e WWW.TDK.COM 14 r T D K Start Frequency MHz 2400 Stop Frequency MHz 2500 0.74 10.5 1.0 23 2400 2500 0.45 12.0 1.0 22 2400 2400 2500 2500 0.45 0.40 13.0 1.0 14.5 1.0 2400 2500 0.35 2400 2400 2500 2500 0.35 0.30 2400 2500 0.35 D i s Ins. Loss Isolation Coupling dB dB (MAX) (MIN) VSWR (MAX) Att. (MIN.) Size mm (typ.) Part No. 1.4 MHz - dB - MHz - dB - 1.6x0.8x0.6 HHM2240SA1 1.5 - - - - 1.6x0.8x0.6 HHM2241SA1 25 25 1.5 1.7 - - - - 1.6x0.8x0.6 1.6x0.8x0.6 HHM2242SA1 HHM2243SA1 16.0 1.0 25 1.3 - - - - 1.6x0.8x0.6 HHM2245SA1 17.0 1.0 20.0 1.0 30 38 1.3 1.3 - - - - 1.6x0.8x0.6 1.6x0.8x0.6 HHM2246SA1 HHM2244SA1 20.0 1.0 25 1.4 4800-5000 20 7200-7500 20 2.0x1.25x0.95 HHM2618A1 c o v e WWW.TDK.COM 7 r T D K TDK RF Components for UWB Applications RF Components for WLAN Applications TDK BAND PASS FILTERS FOR UWB APPLICATIONS 5GHz Multilayer Band Pass Filter Start Frequency MHz 5150 Stop Frequency MHz 5900 5150 5900 4900 Attenuation (MIN.) Ins. Loss dB (MAX) MHz dB 2.2 3450 1.5 3450 5950 1.5 3450 25 9800 17 4900 5950 2.0 3300 40 4000 25 7300 4900 4940 5850 5850 1.2 3.5 824 2700 50 40 1910 4650 50 20 TDK Band Pass Filters for UWB are available in a performance and a reduced footprint version. The performance version is for applications requiring maximum attenuation at 2.4GHz and 5GHz applications. Reduced footprint series is for applications requiring minimum attenuation. Size mm (typ.) Part No. 35 1.6X0.8X0.6 DEA165487BT-1202 35 2.0X1.2X0.9 DEA205437BT-1200 2.0X1.2X0.9 DEA205425BT-1209B2 14 2.0X1.2X0.95 DEA205425BT-2028A4 9800 7250 15 30 2.5X2.0X0.9 2.5X2.0X1.0 DEA255375BT-2076A1 DEA255395BT-2065D2 Size mm (typ.) Part No. 1.6X0.8X0.8 1.6X0.8X0.8 DEA165725LT-1196A2 DEA165850LT-1197B2 MHz dB MHz dB DEA-3002B1 DEA-3015B1 WiMedia Band Group WiMedia Band Group 3 5GHz Low Pass Filter Start Frequency MHz 5125 4900 Stop Frequency MHz 5725 5950 Attenuation (MIN.) Ins. Loss dB (MAX) MHz dB MHz dB MHz dB 1.5 0.7 6800 9800 12 20 10250 11900 25 30 11450 25 [MECHANICAL DIMENSIONS] 5GHz Balanced Output Band Pass Filter Start Frequency MHz 4900 Stop Frequency MHz 5950 Attenuation (MIN.) Ins. Loss dB (MAX) Bal. Imped. ohm MHz dB MHz dB Size mm (typ.) Part No. 2.8 100 4000 30 8000 20 2.0X1.5X1.3 DEA215425BT-7075C2 Sample Specification : DEA255425BT-2028A4 Electrical Characteristics at 25deg C No. Parameter Specification Min. Max. TYP -- -- -- -- 1.6 2.0 Freq. (MHz) 1 Center Frequency 5425 2 Insertion Loss 4900-5950 Insertion Loss 3 4900-5950 -40 ~ +85 C 4 Return Loss 4900-5950 5 Attenuation 1280-3300 6 Attenuation 3300-4000 7 Attenuation 4375-4465 8 Attenuation 7300-8930 9 Attenuation 9800-11900 Unit -- dB -- 1.9 2.3 dB 9 40 25 7 14 25 11 50 33 12 18 38 -- -- -- -- -- -- dB dB dB dB dB dB UWB-Typical Data (De-embedded) 0 -10 Gain(dB) -20 -30 -40 -50 -60 500 1500 2500 3500 4500 5500 6500 7500 8500 9500 Frquency (MHz) Please contact TDK for full spec sheets and application notes. D i s c o v e WWW.TDK.COM 6 r T D K D i s c o v e WWW.TDK.COM 15 r T D K TDK RF Components for UWB Applications TDK Balanced Antenna for Use in UWB Applications TDK has developed a multilayer chip antenna with a patented balanced radiator structure. The antenna's unique structure allows it to maintain similar performance regardless of ground plane size. Unlike monopole antennas, which are dependent on ground plane size, this antenna has been designed for ease of integration in various applications without the worry of complex board re-designs. It is ideal for use in CardBus, CompactFlash or USB designs. There is a significant difference in ground plane size but almost no difference in VSWR results. The antenna bandwidth is not detuned by changing the ground plane size. RF Components for WLAN Applications 2.4GHz Band Pass Filter Start Frequency MHz 2400 2400 2400 2400 2400 2400 2400 2400 2400 2400 2400 2400 2400 2400 2400 2400 2300 Stop Frequency MHz 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 2500 Ins. Loss dB (MAX) 1.2 1.5 2.1 3.0 3.0 2.5 1.5 1.5 3.2 2.5 2.6 3.0 2.0 2.2 2.0 2.5 1.4 Attenuation (MIN.) MHz 915 915 915 960 960 915 1900 1300 800 915 960 915 915 960 915 915 915 dB 35 35 45 50 50 47 30 25 40 40 40 32 25 25 25 25 35 MHz 1785 1750 1990 1585 1585 1710 dB 35 30 48 50 50 47 MHz 1910 2100 2170 1990 1880 2170 dB 35 20 20 48 40 35 MHz 4800 4800 4800 2170 1990 4800 dB 30 23 30 22 40 30 2000 1910 1710 1710 1250 1710 1600 1710 1710 1785 10 35 40 40 30 25 15 20 20 35 3000 2170 1910 2170 1900 1910 3200 1910 1910 1910 12 23 40 20 30 25 22 20 20 35 3600 4800 4800 4800 4800 4800 4800 4800 4800 4800 30 25 30 30 25 20 25 20 25 30 Size mm (typ.) Part No. DEA252450BT-2027A1 DEA252450BT-2031A1 DEA252450BT-2024C1 DEA252450BT-2024C2 DEA252450BT-2024D4 DEA252450BT-2063C1 DEA202450BT-1251A1 DEA202450BT-1213C1 DEA202450BT-2068A1 DEA202450BT-3201B2 DEA202450BT-2038A1 DEA162450BT-1210A1 DEA162450BT-1241A1 DEA162450BT-1260B2 DEA162450BT-1247B1 DEA162450BT-1247C1 DEA252400BT-2030A1 2.5x2.0x0.95 2.5x2.0x0.95 2.5x2.0x0.95 2.5x2.0x0.95 2.5x2.0x0.95 2.5x2.0x0.95 2.0x1.25x0.95 2.0x1.25x0.95 2.0x1.25x0.70 2.0x1.25x0.70 2.0x1.25x0.95 1.6x0.8x0.60 1.6x0.8x0.60 1.6x0.8x0.60 1.6x0.8x0.55 1.6x0.8x0.55 2.5x2.0x0.95 2.4GHz Low Pass Filter Start Frequency MHz 2400 Stop Frequency MHz 2500 2300 2500 Attenuation (MIN.) Ins. Loss dB (MAX) MHz dB MHz dB MHz dB Size mm (typ.) Part No. 0.42 4800 25 5000 25 7200 18 1.6X0.8X0.6 DEA162500LT-1212A1 0.48 4800 35 5000 35 7200 25 1.6X0.8X0.6 DEA162500LT-1217A1 Ins. Loss dB (MAX) MHz dB MHz dB MHz dB Size mm (typ.) Part No. 0.75 920 25 1790 17 1915 20 2.0X1.2X1.0 DEA202484HT-8002A1 1.4 920 25 1790 18 1915 18 1.6X0.8X0.6 DEA162400HT-8004B1 2.4GHz High Pass Filter Electrical Specifications Parameter Operation Frequency Polarization Antenna Gain Impedance VSWR Value Unit 3.1--5.2 Linear (Mixed) 2.0 (typ.) 50 3 (Max) GHz None dBi ohm None Start Frequency MHz 2400 Stop Frequency MHz 2484 2400 2500 Attenuation (MIN.) Sample Specification : DEA252450BT-2024C2 Radiation Patterns Electrical Characteristics at 25deg C Contact TDK for full spec sheets and application notes D i s c o v e WWW.TDK.COM 16 r T D K D No. Parameter Freq. (MHz) 1 2 3 4 5 6 7 Insertion Loss Return Loss Attenuation Attenuation Attenuation Attenuation Attenuation 2400-2480 2400-2480 880-960 1565-1585 1710-1880 1930-1990 2110-2170 i s c Specification Min. Max. TYP -- 3.0 2.29 10.0 -- 13.7 50.0 -- 53.8 50.0 -- 54.7 48.0 -- 58.3 48.0 -- 65.5 22.0 -- 33.6 o Unit dB dB dB dB dB dB dB v e WWW.TDK.COM 5 r T D K RF Components for WLAN Applications TDK WLAN components provide leading edge miniaturization technology while providing exceptional electrical characteristics. TDK RF Components are recommended by leading WLAN chipset manufacturers. The following pages list our standard BPF's, LPF's, HPF's, diplexers and baluns for 2.4GHz & 5GHz WLAN. TDK Services for UWB Wireless Systems TDK Compliance Test Services & Expertise For UWB Wireless Systems TDK's advanced wireless radio testing services have been used by leading UWB chipset companies for both, FCC compliance and UWB transceiver development. TDK provides complete regulatory compliance testing, report preparation and submission. Let TDK work with you to develop test and measurement solution for your Certified Wireless USB products. TDK Test Labs located in Austin & Tokyo TDK supports the complete FCC submission process. Please contact TDK for evaluation samples and detailed specifications. Diplexer for 2.4GHz & 5GHz Start Frequency MHz Stop Frequency MHz Ins. Loss dB (MAX) Start Frequency MHz Stop Frequency MHz Insertion Loss dB (MAX) Size mm (typ.) Part Number 2300 2500 0.65 4900 5950 1.4 2.0x1.25x0.95 DPX205950DT-9008A1 2300 2500 0.65 4900 5950 1.4 2.0x1.25x0.95 DPX205950DT-9108A1 2400 2500 0.5 4900 5850 0.75 2.0x1.25x0.95 DPX205850DT-4027B1 v e WWW.TDK.COM r D i s c o 4 3D radiation pattern of typical dipole antenna. FCC granted UWB transceiver General Atomics: AEVK-1 Wisair: DV9100 T D K UWB transceiver testing requires measurements spanning wide frequency and dynamic ranges. TDK provides FCC compliance testing using specialized instrumentation and an optimized facility to provide test reports. D i s c o Antenna performance is an important part of the UWB solution. TDK performs antenna analysis for high performance Certified Wireless USB transceiver development. v e WWW.TDK.COM 17 r T D K TDK Services for UWB Wireless Systems TDK Test & Measurement Solutions for Your UWB Wireless System Table of Contents UWB-EMC Test System UWB-EMC test system (for test and measurement of radiated emission from UWB radio) Ultra wide frequency measurement required FCC compliance test. Ultra wide dynamic ranges for UWB test which radiate very low power emission. TDK's original anechoic chamber, antenna, and software based test system. Possible to upgrade your EMC test systems to state-of-theart UWB-EMC test system. 3m chamber (FCC comply, 9x6x5.7m) Compact chamber (FCC comply, 7x4x3m) TDK's original hybrid anechoic chamber Test system for measurement up to 40GHz Hardware, software, & training are included TDK Offers Complete Turnkey Systems of Anechoic Chambers TDK offers a "single vendor" solution for test facilities by offering both systems and test chambers. Offering a TDK line of turnkey 3 meter, 5 meter, 10 meter, and compact anechoic chamber solutions based on top-performing TDK absorber technologies. Each facility is built with high-performance radio wave absorbing materials selected specifically to match your test requirements and manage the implementation of both systems and chambers to deliver a turnkey test facility that is tightly integrated. Anechoic chambers for EMC Testing: 3m type (FCC comply, 9x6x5.7m) or compact type (FCC comply,7x4x3m) TDK's high performance electromagnetic absorber material (IB-015 and IP-045 absorber) Automatically controlled turntable and antenna mast via optical fiber. Normalized Site Attenuation (NSA) measurement for compliance. D i s c o TDK offers a series of RF components for a variety of wireless applications. From filters and antennas to test services and anechoic chambers, TDK has a solution for you. Anechoic Chamber for Antenna Testing Anechoic chamber (compact type, 7x4x4m) TDK's high performance electromagnetic absorber material (IS-060 absorber) TDK' original oblique incident absorber, IS-SM050, for exceptional absorption performance Quiet zone (QZ) measurement v e WWW.TDK.COM 18 r T D K D i WLAN SOLUTIONS PAGE 04 BLUETOOTH SOLUTIONS PAGE 08 WiMAX Solutions Page 10 GPS SOLUTIONS PAGE 13 UWB SOLUTIONS PAGE 14 s c o v e WWW.TDK.COM r T D K Discover TDK Solutions Discover TDK Solutions RF Components for Wireless Applications RF Components for Wireless Applications For samples, datasheets and additional product information on these and other TDK Wireless Solutions . . . TDK RF Components & Services : TDK Corporation of America 1221 Business Center Drive, Mount Prospect, IL 60056 Phone: +1 (847) 803-6100 Fax: +1 (847) 803-1125 Email: wirelessinfo@tdktca.com Visit our website: WWW.TDK.COM D i s c o v e WWW.TDK.COM r T D K D i Band Pass Filters Diplexers Low Pass Filters Couplers High Frequency Inductors Circulators/ Isolators s c o v e WWW.TDK.COM Baluns Antennas High Pass Filters Test Services Test Equipment Anechoic Chambers r T D K