Discover TDK
WWW.TDK.COM
For samples, datasheets and additional product information on
these and other TDK Wireless Solutions . . .
TDK Corporation of America
1221 Business Center Drive, Mount Prospect, IL 60056
Phone: +1 (847) 803-6100
Fax: +1 (847) 803-1125
Email: wirelessinfo@tdktca.com
Visit our website: WWW.TDK.COM
Discover TDK Solutions
RF Components for Wireless Applications
Discover TDK Solutions
RF Components for Wireless Applications
● Band Pass Filters
● Diplexer s
● Low Pass Filters
● Couplers
● High Frequency Inductors
● Circulators/ Isolators
● Baluns
● Antennas
● High Pass Filters
● Test Services
● Test Equipment
● Anechoic Chambers
Discover TDK
WWW.TDK.COM
TDK RF Components & Services :
TDK Test & Measurement Solutions for Your UWB Wireless System
UWB
UWB-
-EMC Test System
EMC Test System
UWB-EMC test system (for test and measurement of radi-
ated emission from UWB radio) Ultra wide frequency meas-
urement required FCC compliance test.
Ultra wide dynamic ranges for UWB test which radiate very
low power emission.
TDK’s original anechoic chamber, antenna, and software
based test system.
Possible to upgrade your EMC test systems to state-of-the-
art UWB-EMC test system.
3m chamber (FCC comply, 9x6x5.7m)
Compact chamber (FCC comply, 7x4x3m)
TDK’s original hybrid anechoic chamber
Test system for measurement up to 40GHz
Hardware, software, & training are included
TDK Offers Complete Turnkey Systems of Anechoic Chambers
TDK offers a "single vendor" solution for test facilities by offering both systems and test chambers. Offering a TDK line of turn-
key 3 meter, 5 meter, 10 meter, and compact anechoic chamber solutions based on top-performing TDK absorber technologies.
Each facility is built with high-performance radio wave absorbing materials selected specifically to match your test requirements
and manage the implementation of both systems and chambers to deliver a turnkey test facility that is tightly integrated.
Anechoic chambers for EMC Testing:
3m type (FCC comply, 9x6x5.7m) or compact type (FCC comply,7x4x3m)
TDK’s high performance electromagnetic absorber material
(IB-015 and IP-045 absorber)
Automatically controlled turntable and antenna mast via optical fiber.
Normalized Site Attenuation (NSA) measurement for compliance.
Anechoic Chamber for Antenna Testing
Anechoic chamber (compact type, 7x4x4m)
TDK’s high performance electromagnetic absorber material (IS-060 absorber)
TDK’ original oblique incident absorber, IS-SM050, for exceptional absorption
performance
Quiet zone (QZ) measurement
TDK Services for UWB Wireless Systems
Discover TDK
WWW.TDK.COM
18
Discover TDK
WWW.TDK.COM
Table of Contents
TDK offers a series of RF components for a variety of wireless applications.
From filters and antennas to test services and anechoic chambers,
TDK has a solution for you.
● WLAN SOLUTIONS PAGE 04
● BLUETOOTH SOLUTIONS PAGE 08
● WiMAX Solutions Page 10
● GPS SOLUTIONS PAGE 13
● UWB SOLUTIONS PAGE 14
Discover TDK
WWW.TDK.COM
4
RF Components for WLAN Applications
Please contact TDK for evaluation samples and detailed specifications.
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Start
Frequency
MHz
Stop
Frequency
MHz
Insertion Loss
dB (MAX) Part Number
2300 2500 0.65 4900 5950 1.4 DPX205950DT-9008A1
2300 2500 0.65 4900 5950 1.4 DPX205950DT-9108A1
2400 2500 0.5 4900 5850 0.75 DPX205850DT-4027B1
Size
mm (typ.)
2.0x1.25x0.95
2.0x1.25x0.95
2.0x1.25x0.95
Diplexer for 2.4GHz & 5GHz
TDK WLAN components provide leading edge miniaturization technology while
providing exceptional electrical characteristics. TDK RF Components are
recommended by leading WLAN chipset manufacturers.
The following pages list our standard BPF’s, LPF’s, HPF’s, diplexers and baluns
for 2.4GHz & 5GHz WLAN.
Discover TDK
WWW.TDK.COM
17
TDK’s advanced wireless radio testing services have been used by leading UWB chipset companies for both,
FCC compliance and UWB transceiver development. TDK provides complete regulatory compliance testing,
report preparation and submission.
Let TDK work with you to develop test and measurement solution for your Certified Wireless USB products.
UWB transceiver testing requires measurements spanning
wide frequency and dynamic ranges. TDK provides FCC
compliance testing using specialized instrumentation and
an optimized facility to provide test reports.
FCC granted UWB transceiver
General Atomics: AEVK-1
Wisair: DV9100
3D radiation pattern of typical dipole antenna.
Antenna performance is an important part of the UWB solution.
TDK performs antenna analysis for high performance Certified
Wireless USB transceiver development.
TDK supports the complete FCC submission process.
TDK Test Labs
located in
Austin & Tokyo
TDK Compliance Test Services & Expertise For UWB Wireless Systems
TDK Services for UWB Wireless Systems
Discover TDK
WWW.TDK.COM
16
TDK Balanced Antenna for Use in UWB Applications
TDK has developed a multilayer chip antenna with a patented balanced radiator structure. The
antenna’s unique structure allows it to maintain similar performance regardless of ground plane
size. Unlike monopole antennas, which are dependent on ground plane size, this antenna has
been designed for ease of integration in various applications without the worry of complex
board re-designs. It is ideal for use in CardBus, CompactFlash or USB designs.
Contact TDK for full spec sheets and application notes
Radiation Patterns
There is a significant difference in ground plane
size but almost no difference in VSWR results.
The antenna bandwidth is not detuned by
changing the ground plane size.
TDK RF Components for UWB Applications
Parameter Value Unit
Operation Frequency 3.1—5.2 GHz
Polarization Linear (Mixed) None
Antenna Gain 2.0 (typ.) dBi
Impedance 50 ohm
VSWR 3 (Max) None
Electrical Specifications
Discover TDK
WWW.TDK.COM
5
Sample Specification : DEA252450BT-2024C2
RF Components for WLAN Applications
2.4GHz Band Pass Filter
2.4GHz Low Pass Filter
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX) Attenuation (MIN.) Size
mm (typ.) Part No.
MHz dB MHz dB MHz dB
2400 2500 0.42 4800 25 5000 25 7200 18 1.6X0.8X0.6 DEA162500LT-1212A1
2300 2500 0.48 4800 35 5000 35 7200 25 1.6X0.8X0.6 DEA162500LT-1217A1
2.4GHz High Pass Filter
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX) Attenuation (MIN.) Size
mm (typ.) Part No.
MHz dB MHz dB MHz dB
2400 2484 0.75 920 25 1790 17 1915 20 2.0X1.2X1.0 DEA202484HT-8002A1
2400 2500 1.4 920 25 1790 18 1915 18 1.6X0.8X0.6 DEA162400HT-8004B1
Parameter Freq. (MHz) Specification Unit
Min. Max. TYP
1 Insertion Loss 2400-2480 — 3.0 2.29 dB
2 Return Loss 2400-2480 10.0 — 13.7 dB
3 Attenuation 880-960 50.0 — 53.8 dB
4 Attenuation 1565-1585 50.0 — 54.7 dB
5 Attenuation 1710-1880 48.0 — 58.3 dB
6 Attenuation 1930-1990 48.0 — 65.5 dB
7 Attenuation 2110-2170 22.0 — 33.6 dB
No.
Electrical Characteristics at 25deg C
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX) Attenuation (MIN.) Size mm (typ.) Part No.
MHz dB MHz dB MHz dB MHz dB
2400 2500 1.2 915 35 1785 35 1910 35 4800 30 2.5x2.0x0.95
2400 2500 1.5 915 35 1750 30 2100 20 4800 23 2.5x2.0x0.95 DEA252450BT-2031A1
2400 2500 2.1 915 45 1990 48 2170 20 4800 30 2.5x2.0x0.95 DEA252450BT-2024C1
2400 2500 3.0 960 50 1585 50 1990 48 2170 22 2.5x2.0x0.95 DEA252450BT-2024C2
2400 2500 3.0 960 50 1585 50 1880 40 1990 40 2.5x2.0x0.95 DEA252450BT-2024D4
2400 2500 2.5 915 47 1710 47 2170 35 4800 30 2.5x2.0x0.95 DEA252450BT-2063C1
2400 2500 1.5 1900 30 2.0x1.25x0. 95 DEA202450BT-1251A1
2400 2500 1.5 1300 25 2000 10 3000 12 3600 30 2.0x1.25x0.95 DEA202450BT-1213C1
2400 2500 3.2 800 40 1910 35 2170 23 4800 25 2.0x1.25x0.70 DEA202450BT-2068A1
2400 2500 2.5 915 40 1710 40 1910 40 4800 30 2.0x1.25x0.70 DEA202450BT-3201B2
2400 2500 2.6 960 40 1710 40 2170 20 4800 30 2.0x1.25x0.95 DEA202450BT-2038A1
2400 2500 3.0 915 32 1250 30 1900 30 4800 25 1.6x0.8x0.60 DEA162450BT-1210A1
2400 2500 2.0 915 25 1710 25 1910 25 4800 20 1.6x0.8x0.60 DEA162450BT-1241A1
2400 2500 2.2 960 25 1600 15 3200 22 4800 25 1.6x0.8x0.60 DEA162450BT-1260B2
2400 2500 2.0 915 25 1710 20 1910 20 4800 20 1.6x0.8x0.55 DEA162450BT-1247B1
2400 2500 2.5 915 25 1710 20 1910 20 4800 25 1.6x0.8x0.55 DEA162450BT-1247C1
2300 2500 1.4 915 35 1785 35 1910 35 4800 30 2.5x2.0x0.95 DEA252400BT-2030A1
DEA252450BT-2027A1
Discover TDK
WWW.TDK.COM
6
RF Components for WLAN Applications
Sample Specification : DEA255425BT-2028A4
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX) Attenuation (MIN.) Size
mm (typ.) Part No.
MHz dB MHz dB MHz dB
5150 5900 2.2 3450 35 1.6X0.8X0.6 DEA165487BT-1202
5150 5900 1.5 3450 35 2.0X1.2X0.9 DEA205437BT-1200
4900 5950 1.5 3450 25 9800 17 2.0X1.2X0.9 DEA205425BT-1209B2
4900 5950 2.0 3300 40 4000 25 7300 14 2.0X1.2X0.95 DEA205425BT-2028A4
4900 5850 1.2 824 50 1910 50 9800 15 2.5X2.0X0.9 DEA255375BT-2076A1
4940 5850 3.5 2700 40 4650 20 7250 30 2.5X2.0X1.0 DEA255395BT-2065D2
5GHz Multilayer Band Pass Filter
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX) Attenuation (MIN.) Size
mm (typ.) Part No.
MHz dB MHz dB MHz dB
5125 5725 1.5 6800 12 10250 25 11450 25 1.6X0.8X0.8 DEA165725LT-1196A2
4900 5950 0.7 9800 20 11900 30 1.6X0.8X0.8 DEA165850LT-1197B2
5GHz Low Pass Filter
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX) Bal. Imped.
ohm Attenuation (MIN.) Size
mm (typ.) Part No.
MHz dB MHz dB
4900 5950 2.8 100 4000 30 8000 20 2.0X1.5X1.3 DEA215425BT-7075C2
5GHz Balanced Output Band Pass Filter
Parameter Freq. (MHz) Specification Unit
Min. Max. TYP
1 Center Frequency 5425 — — — —
2 Insertion Loss 4900-5950 — 1.6 2.0 dB
3 Insertion Loss
-40 ~ +85 °C 4900-5950 — 1.9 2.3 dB
4 Return Loss 4900-5950 9 11 — dB
5 Attenuation 1280-3300 40 50 — dB
6 Attenuation 3300-4000 25 33 — dB
7 Attenuation 4375-4465 7 12 — dB
No.
8 Attenuation 7300-8930 14 18 — dB
9 Attenuation 9800-11900 25 38 — dB
Electrical Characteristics at 25deg C
Discover TDK
WWW.TDK.COM
15
TDK RF Components for UWB Applications
TDK Band Pass Filters for UWB are available in a performance and a reduced footprint version. The performance version is for applications
requiring maximum attenuation at 2.4GHz and 5GHz applications. Reduced footprint series is for applications requiring minimum attenuation.
Please contact TDK for full spec sheets and application notes.
UWB-Typi cal Data (De- em bedded)
-60
-50
-40
-30
-20
-10
0
500 1500 2500 3500 4500 5500 6500 7500 8500 9500
Frquency ( M Hz)
Gain (dB)
WiMedia
Band Group 3
TDK B
TDK BAND
AND P
PASS
ASS F
FILTERS
ILTERS
FOR
FOR UWB A
UWB APPLICATIONS
PPLICATIONS
DEA-3002B1
[MECHANICAL DIMENSIONS]
DEA-3015B1
WiMedia
Band Group
Discover TDK
WWW.TDK.COM
14
TDK Services for UWB Wireless Systems
Band Item Size (mm) Impedance Pass Band
(MHz) Insertion Loss Attenuation (typ.)
2450MHz 5150MHz 7000MHz
Band1-3
(3168-4752MHz)
Balun
2.0x1.25 t=1.05 MAX 50/100 ohm 3100-4900 1.0dB MAX --- --- --- HHM1583B1
2.0x1.25 t=1.05 MAX 50/100 ohm 3100-4900 1.0dB MAX --- --- --- HHM1596A1
1.6x0.8 t=0.7 MAX 50/100 ohm 3100-4900 1.2dB MAX --- --- --- HHM1775B1
BPF
4.5x3.2 t=0.9 MAX 50/50ohm 3168-4752 1.7dB MAX 45dB 28dB 32dB DEA453960BT-3002B1
4.5x3.2 t=0.9 MAX 50/50ohm 3168-4752 1.9dB MAX 48dB 19dB 33dB DEA453960BT-3007B1
3.2x2.5 t=0.85 MAX 50/50ohm 3168-4752 1.7dB typ. 25dB 25dB 32dB DEA323960BT-3008A3
2.0x1.25 t=0.8 MAX 50/50ohm 3168-4752 2.2dB typ. 16dB 21dB 32dB DEA203960BT-3016A1
Balance
BPF 2.5x2.0 t=1.0 MAX 50/100ohm 3168-4752 3.5dB typ. 24dB 7dB 20dB DEA253960BT-7113A1
Band3
(4224-4752MHz)
BPF 2.0x1.25 t=1.0 MAX 50/50ohm 4224-4752 1.5dB typ. 50dB 15dB 30dB DEA204488BT-3012A1
Balance
BPF 2.5x2.0 t=1.0 MAX 50/100ohm 4224-4752 2.6dB typ. 46dB 28dB 40dB DEA254488BT-7114A1
Band1-8
(3168-7656MHz) Balun 2.0x1.25 t=1.05 MAX 50/100 ohm 3000-8000 1.5dB MAX --- --- --- HHM1595A1
Band6-9
(6336-7920MHz) BPF 3.2x2.5 t=1.3 MAX 50/50ohm 6336-7920 2.3dB typ. 53dB 32dB --- DEA327128BT-3015B1
Band8-10
(7250-9000MHz) Balance
BPF 2.5x2.0 t=1.0 MAX 50/100 ohm 7250-9000 2. 5dB typ 45dB 45dB --- DEA258125BT-7096C1
WLAN+Band1-3
(3168-4752MHz) DPX 2.0x1.25 t=1.05 MAX 50/50 ohm 2300-2500
3168-4752 1.1dB MAX(L)
1.2dB MAX(H) 25dB 30dB --- DPX204752DT-4028A1
WLAN+Band1-11
(3168-8976MHz) DPX 2.0x1.25 t=1.05 MAX 50/50 ohm 2300-2500
3168-8976 1.0dB typ. (L)
1.1dB typ. (H) 25dB 40dB --- DPX204752DT-4040B1
Band1-3+Band7-11
(3168-4752MHz)
(6336-8976MHz) DPX 4.5x3.2 t=1.00 MAX 50/50 ohm 3168-4752
6336-8976 2.8dB MAX(L)
3.3dB MAX(H) 30dB 15dB --- DPX458976DT-0010A1
TDK Part No.
TDK brings together various technologies required to develop and manufacture
advanced wireless products, systems and equipment. TDK provides key building
blocks necessary to bring Wireless USB and other Ultra Wide Band products to
market.
TDK components & services for UWB Technology include:
Antennas
Baluns
Band Pass Filters
Diplexers
EMI Filters
Test Systems & Services
Anechoic Chambers
Inductors & Capacitors
Standard RF Components Line-up for UWB:
Discover TDK
WWW.TDK.COM
7
RF Components for WLAN Applications
2.4GHz Balun Transformers
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX) Bal. Imped.
ohm Amp. Bal dB
(MAX) Phase Bal Deg Size
mm (typ.) Part No.
5150 5875 1.0 100 2.0 180+/- 10 2.0X1.2X0.95 HHM1562B
4900 5950 1.0 100 2.0 180+/- 10 2.0X1.2X0.95 HHM1570B1
4900 5950 1.2 50 1.0 180+/- 10 1.6X0.8X0.6 HHM1733B1
4900 5950 1.0 100 2.0 180+/- 10 1.6X0.8X0.6 HHM1732B1
4900 5950 1.2 200 1.5 180+/- 10 1.6X0.8X0.6 HHM1752A2
5GHz Balun Transformers
2.4GHz Coupler and Coupler with LPF
Start Frequency
MHz Stop Frequency
MHz Ins. Loss
dB (MAX) Bal. Imped.
Ohm Amp. Bal. dB
(MAX) Phase Bal. Deg. R. Loss dB
(MIN) Size mm (typ) Part No.
2400 2500 1.2 50 0 ± 2.0 180 ± 10 10 2.0x1.25x0.95 HHM1517
2400 2500 1.0 75 0 ± 1.5 180 ± 10 10 2.0x1.25x0.95 HHM1541E1
2400 2500 1.0 100 0 ± 2.0 180 ± 10 10 2.0x1.25x0.95 HHM1520
2400 2500 1.0 200 0 ± 2.0 180 ± 10 10 2.0x1.25x0.95 HHM1521
2300 2500 1.2 50 0 ± 2.0 180 ± 10 10 2.0x1.25x0.95 HHM1517A2
2300 2500 1.0 75 0 ± 2.0 180 ± 10 10 2.0x1.25x0.95 HHM1541E2
2300 2500 1.0 100 0 ± 2.0 180 ± 10 10 2.0x1.25x0.95 HHM1520A2
2300 2500 1.1 200 0 ± 2.0 180 ± 10 9.5 2.0x1.25x0.95 HHM1521A2
2400 2500 1.2 50 0 ± 2.0 180 ± 10 10 1.6x0.8x0.6 HHM1710D1
2400 2500 1.2 100 0 ± 2.0 180 ± 10 10 1.6x0.8x0.6 HHM1711D1
2400 2500 1.2 150 0 ± 2.0 180 ± 10 10 1.6x0.8x0.6 HHM1712D1
2400 2500 1.2 200 0 ± 1.7 180 ± 10 10 1.6x0.8x0.6 HHM1713E2
2400 2500 1.0 50 0 ± 2.0 180 ± 10 10 1.0x0.5x0.45 HHM1902A1
2400 2500 1.0 100 0 ± 2.0 180 ± 10 10 1.0x0.5x0.45 HHM1903A1
2400 2500 1.0 75 0 ± 2.0 180 ± 10 10 1.0x0.5x0.45 HHM1904A1
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX) Coupling dB Isolation
(MIN) VSWR
(MAX) Att. (MIN.) Size mm (typ.)
MHz dB MHz dB
2400 2500 0.74 10.5 ± 1.0 23 1.4 - - - - 1.6x0.8x0.6 HHM2240SA1
2400 2500 0.45 12.0 ± 1.0 22 1.5 - - - - 1.6x0.8x0.6 HHM2241SA1
2400 2500 0.45 13.0 ± 1.0 25 1.5 - - - - 1.6x0.8x0.6 HHM2242SA1
2400 2500 0.40 14.5 ± 1.0 25 1.7 - - - - 1.6x0.8x0.6 HHM2243SA1
2400 2500 0.35 16.0 ± 1.0 25 1.3 - - - - 1.6x0.8x0.6 HHM2245SA1
2400 2500 0.35 17.0 ± 1.0 30 1.3 - - - - 1.6x0.8x0.6 HHM2246SA1
2400 2500 0.30 20.0 ± 1.0 38 1.3 - - - - 1.6x0.8x0.6 HHM2244SA1
2400 2500 0.35 20.0 ± 1.0 25 1.4 4800-5000 20 7200-7500 20 2.0x1.25x0.95 HHM2618A1
Part No.
Discover TDK
WWW.TDK.COM
8
Base band
Switch
Transceiver
BPF
ANT
Balun
Balanced output BPF
Balanced impedance is
optimized to match IC
TDK has designed a series of Balanced Output BPF’s that are optimized to match the
impedance requirements of Bluetooth IC’s.
TDK RF components can be used in different architectures (see Example 1 & 2).
Please refer to page 5 for 2.4GHz BPF information and page 7 for 2.4GHz balun
information.
TDK RF Components are recommended by leading Bluetooth chipset manufacturers.
RF Components for Bluetooth Applications
Discover TDK
WWW.TDK.COM
13
TDK RF Components for GPS Applications
TDK has developed a new series of RF components for use in GPS systems.
In addition to the components listed below TDK has a variety of Antennas
for use in GPS Applications.
Please Contact TDK for more information.
ITEM size Insertion Loss Attenuation Return Loss System Part No.
dB MHz dB MHz dB MHz
BPF Band Pass
Filter 4.3x4.9x2.1max 3.5max 1573.42-1577.42
21min
20min
30min
30min
35min
50min
1525.42
1625.42
1475.42
1675.42
1710-1785
1850-1910
9.54min 1573.42-1577.42 GPS CF61A7301B
Diplexer
Low band
(Low Pass
Filter) 2.0x1.25x1.05max
0.65max 824-894 20min 824-894 10min 824-894 CDMA800 Tx/Rx
DPX201990DT-4012A1
High band
(High Pass
Filter) 0.70max 1574-1576
1850-1990 20min 1574-1576
1850-1990 10min 1574-1576
1850-1990
GPS
+
CDMA1900 Tx/Rx
Low band
(Low Pass
Filter) 1.6x0.8x0. 7max
0.60max 806-941
16min
18min
14min
5min
1575
1612-1648
1792-1856
2000-3000
14min 806-941 iDEN
DPX161576DT-8011B1
High band
(High Pass
Filter) 0.70max 1574.42-1576.42 20min 806-928 14min 1574.42-
1576.42 GPS
Low band
(Low Pass
Filter) 1.6x0.8x0. 7max
0.73typ 1565-1585 21.7typ 2400-2500 15.3typ 1565-1585 GPS
DPX162500DT-8014A1
High band
(High Pass
Filter) 0.87typ 2400-2500 32.7typ 1565-1585 15.1typ 2400-2500 Bluetooth
Low band
(Low Pass
Filter)
1.6x0.8x0.7max
0.73typ 1574-1576 22.3typ 2402-2480 17.3typ 1574-1576 GPS
DPX162500DT-8014B2
High band
(High Pass
Filter) 0.85typ 2402-2480
20.7typ
20.6typ
33.2typ
6.3typ
824-894
880-960
1574-1576
1710-1880
14.0typ 2402-2480 Bluetooth
Low band
(Low Pass
Filter) 1.6x0.8x0. 7max
0.72typ 1565-1585 23.4typ 2110-2170 20.5typ 1565-1585 GPS
DPX162170DT-8015A1
High band
(High Pass
Filter) 0.86typ 2110-2170 21.6typ 1565-1585 12.0typ 2110-2170 UMTS(BC1) Rx
Low band
(Low Pass
Filter) 1.6x0.8x0. 7max
0.84typ 1565-1585 24.6typ 2110-2170 15.8typ 1565-1585 GPS
High band
(High Pass
Filter) 1.22typ 2110-2170 32.0typ 1565-1585 14.9typ 2110-2170 UMTS(BC1) Rx
DPX162170DT-8016A1
Discover TDK
WWW.TDK.COM
12
TDK RF Components for WiMAX Applications
Front-End Modules for 802.16e Mobile WiMAX Applications
TDK is developing a series of front end modules for use in mobile WiMAX ap-
plications. TDK is working with the leading WiMAX RF IC manufacturers to
match the FEM’s to the transceiver. Please contact TDK for full specifications.
• Operating Frequency: 2.5 to 2.7 GHz, 2.3GHz and 3.5GHz
• Versions with and without Integrated Output Power Detector
• 50 W Matched RF Ports
• Low Profile LGA Package : 5.0 x 5.6 x 1.1 mm
• Supports 1X2 (1 TX & 2 RX) Configuration
• Multi-Chip Technology: Integrated Power Amplifier and T/R Switch
• Utilizes TDK’s LTCC Technology to embed all required filtering
Ceramic Block Band Pass Filter for 700MHz, 2.3GHz, 2.5GHz, 2.5GHz & 3.5GHz
Circulators for 2.3GHz, 2.5GHz, 2.5GHz & 3.5GHz
Freq. range MHz Ins. Loss dB
(MAX) Isolation dB
(MIN) V.S.W.R.
Z0=50ohm (Max) Max. Handling
Power (W) Size mm (typ.)
2500 - 2700 0.40 20 1.3 100 (Ave) 20x20x8.5 CU1S2001AC-2600
2500 - 2700 0.35 18 1.3 100 (Ave) 19x19x8.0 CU1L1905AC-2600
2500 - 2700 0.35 18 1.3 100 (Ave) 19x25.4x8.0 CU1L1905AT-2600
2500 - 2700 0.80 10 1.6 2.5 5.0x5.0x1.9 CU452A1F-2600-1TE2
3400 - 3600 0.55 18 1.3 100 (Ave) 20x20x8.5 CU1S2001AC-3500
3400 - 3600 0.35 18 1.3 100 (Ave) 19x19x8.0 CU1L1905AC-3500
3400 - 3600 0.35 18 1.3 100 (Ave) 19x25.4x8.0 CU1L1905AT-3500
3400 - 3600 1.00 10 1.8 2.5 5.0x5.0x1.9 CU452A1F-3500-1TE2
Part No.
Start Frequency
MHz Stop Frequency
MHz Ins. Loss
dB (MAX) Att. (MIN.) Size mm (typ.)
MHz dB MHz dB MHz dB
700 750 2.2 650 30 800 25 1000 40 13.2x10x3.6 S0465D
2490 2710 1.2 1800 44 3400 42 4400 38 8.0x3.0x3.5 S0486A
3230 3410 1.2 1800 56 2462 45 4400 37 8.0x3.0x3.5 S0486B
3390 3660 1.2 1800 58 2462 45 4400 40 8.0x3.0x3.5 S0486C
3590 3810 1.2 1800 58 2462 45 4400 48 8.0x3.0x3.5 S0486D
Part No.
Discover TDK
WWW.TDK.COM
9
MULTILAYER Band Pass Filter (Balance ou t put Type)
P/N: DEA 252450BT-7022B1
For Bluetooth and 2.4Ghz W-LAN
MECHANICAL DIMENSIONS
Top View
RF Components for Bluetooth Applications
Parameter Specification Typical Value Unit
Frequency Range (Pass Band) 2400-2500 — MHz
Unbalanced Port Characteristics Impedance 50 (nominal) — Ω
Balanced Port Characteristics Impedance 100 (nominal) — Ω
Unbalanced Port Return Loss 9.5 min — dB
Insertion Loss (Pass Band)
+25°C 3.0 max 2.7 dB
-40 — +85°C 3.0 max 3.0 dB
Ripple (Pass Band) 1.0 max 0.2 dB
Attenuation
880-960MHz 48 min 52 dB
1710-1880MHz 45 min 51 dB
1880-1980MHz 40 min 54 dB
2110-2170MHz 25 min 33 dB
4800-5000MHz 30 min 38 dB
Amplitude Impedance at Balanced Port 1.0 max -0.2 dB
Phase Differences at Balanced Port +25°C 180±8 183 Deg
-40 — +85°C 180±10 — Deg
Electrical Characteristics
PIN ASSIGNMENT PIN No.
Unbalanced 1
Balanced 4,5
GND 3,6
DC feed or RF GND 2
PIN CONFIGURATION
2.4GHz Balanced Output Band Pass Filters
Start
Fre-
quency
MHz
Stop
Frequency
MHz
Bal. imped.
ohm Ins. Loss
dB (MAX)
Attenuation (MIN.) Amp. bal .
dB (MAX) Phase bal.
deg
Return
Loss dB
(MIN) Size mm (typ.) Part No.
MHz dB MHz dB MHz dB
2400 2500 50 2.4 1710 25 1920 25 4800 15 0 ± 2.0 180 ± 20 10 2.5x2.0x0.95 DEA252450BT-7001B1
2400 2500 50 1.7 1710 32 1910 32 4800 30 0 ± 1.0 180 ± 15 10 2.5x2.0x0.95 DEA252450BT-7014D1
2400 2500 100 1.9 1710 32 1910 32 4800 30 0 ± 1.0 180 ± 12 10 2.5x2.0x0.95 DEA252450BT-7012D1
2400 2500 100 3.0 1710 45 2170 25 4800 30 0 ± 1.0 180 ± 8 9.5 2.5x2.0x0.95 DEA252450BT-7022B1
2400 2500 CSR BC3 3.3 1710 48 2170 30 4800 25 0 ± 1.0 180 ± 8 8.0 2.5x2.0x0.95 DEA252450BT-7035B2
2402 2480 Infineon 3.5 1710 40 2170 30 4804 30 0 ± 1.5 180 ± 10 9.0 2.5x2.0x0.95 DEA252441BT-7053D2
2400 2500 50 2.7 1710 33 1910 37 2170 10 0 ± 1.5 180 ± 15 10 2.0x1.5x0.95 DEA212450BT-7031A1
2400 2500 ST STLC2500 3.6 1710 28 2170 17 4800 15 0 ± 2.0 180 ± 10 10 2.0x1.5x0.95 DEA212450BT-7043C1
2400 2500 50 2.0 1710 25 4800 25 7200 15 0 ± 1.5 180 ± 15 9.0 2.0x1.25x0.95 DEA202450BT-7116E1
2400 2500 100 3.5 1710 35 2170 25 0 ± 1.0 180 ± 10 10.0 2.0x1.25x0.75 DEA202450BT-7054B1
2402 2480 CSR BC4 2.0x1.25x0.65 DEA202450BT-7041E1
2402 2480 CSR BC4 & 5 3.0 1710 22 1910 20 4804 18 0 ± 2.0 180 ± 10 8.5 2.0x1.25x0.7 DEA202450BT-7099A1
2402 2480 CSR BC4 & 6 3.0 1710 22 1910 20 4804 18 0 ± 2.0 180 ± 10 8.5 2.0x1.25x0.7 DEA202450BT-7118A1
2400 2500 CSR BC3 3.5 1710 38 2170 17 4800 25 0 ± 1.0 180 ± 10 9.0 2.0x1.25x0.95 DEA202450BT-7077A1
2400 2500 ST STLC2500 3.4 1710 39 2168 20 4800 26 0 ± 2.0 180 ± 10 8.5 2.0x1.25x0.92 DEA202450BT-7089C3
2402 2480 ST STLC2500 2.0 1700 20 2000 15 7206 25 0 ± 2.0 180+15/-10 7.0 2.0x1.25x0.92 DEA202450BT-7081A1
2402 2480 ST STLC2500 2.5 1710 40 1910 40 4800 25 0 ± 2.0 180 ± 10 9.0 2.0x1.25x0.92 DEA202450BT-7112B1
Match to CSR BC4
Discover TDK
WWW.TDK.COM
10
TDK RF Components for WiMAX Applications
TDK’s newest line-up of RF Components for WiMAX applications can be used in
both client and base station designs. These components have been developed to
work in the 2.3GHz, 2.5GHz, 3.5GHz and 700MHz bands.
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX) Coupling
dB Isolation
dB V.S.W.R Size
mm (typ.) Part No.
2300 2700 0.55 -12 +/- 1.5 20 Min. 1.5 1.6X0.8X0.6 HHM2241SA3
2300 2700 0.40 -20 +/- 1.5 32 Min. 1.3 1.6X0.8X0.6 HHM2244SA7
2300 2700 0.40 -16 +/- 1.5 25 Min. 1.3 1.6X0.8X0.6 HHM2245SA3
3400 3600 0.35 -18 +/- 1.5 23 Min. 1.3 1.6X0.8X0.6 HHM2261SA1
Couplers for 2.3GHz, 2.5GHz & 3.5GHz
Discover TDK
WWW.TDK.COM
11
TDK RF Components for WiMAX Applications
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX) Bal. Imped.
ohm Amp. Bal dB
(MAX) Phase Bal Deg Size
mm (typ.) Part No.
2300 2700 1.2 50 1.5 180+/- 10 1.6X0.8X0.6 HHM1710J1
2300 2700 1.2 100 1.5 180+/- 12 1.6X0.8X0.6 HHM1711E1
2500 2700 0.8 100 2.2 180+/- 10 1.6X0.8X0.6 HHM1711K1
2500 2700 0.8 100 2.2 180+/- 10 1.6X0.8X0.6 HHM1791A1
3300 3900 1.2 50 1.5 180+/- 15 1.6X0.8X0.6 HHM1727D1
3300 3900 1.0 75 1.2 180+/- 15 1.6X0.8X0.6 HHM1715E1
Balun Transformers for 2.3GHz, 2.5GHz, 3.5GHz
Multilayer Ceramic Band Pass Filter
Low Pass Filter
Balanced Output Band Pass Filter
Start
Frequency
MHz
Stop
Frequency
MHz
Att. (MIN.) Size mm (typ.) Part No.
MHz dB MHz dB MHz dB MHz dB
2300 2690 1.8 1800 14 3400 14 11700 14 2.0x1.25x0.95 DEA202495BT-1242B2
2401 2690 3.3 1580 35 1980 30 2170 10 4802 25 2.5x2.0x0.95 DEA252546BT-2083B2
2496 2690 2.5 2125 18 2313 18 2992 12 2.5x2.0x0.95 DEA252593BT-2074A3
2500 2700 2.2 915 25 1785 25 1980 15 4900 15 1.6x0.8x0.65 DEA162600BT-1258C2
3300 3900 2.2 2600 15 4400 10 6000 25 2.0x1.25x0.95 DEA203600BT-1240B2
Ins. Loss
dB (MAX)
Start
Frequency
MHz
Stop
Frequency
MHz
Att. (MIN.) Size Part No.
Ins. Loss dB
(MAX) MHz dB MHz dB
2300 2690 0.8 4600 25 6900 25 1.6x0.8x0.6 DEA162690LT-1217A2
2400 2700 0.35 4800 26 7200 23 1.6x0.8x0.6 DEA162700LT-5014A1
3400 3600 0.5 6800 26 7200 26 1.6x0.8x0.6 DEA163600LT-5017A1
Start
Frequency
MHz
Stop
Frequency
MHZ
Ins. Loss
dB (MAX)
Bal.
imped.
ohm
Attenuation (MIN.) Size mm (typ.) Part No.
MHz dB MHz dB MHz dB
2300 2690 2.8 50 960 35 1980 10 4900 30 2.0x1.5x0.95 DEA212495BT-7055A2
2500 2700 3.5 100 960 42 1990 35 2170 25 2.5x2.0x0.95 DEA252600BT-7098A2
Diplexer
Start Fre-
quency Range
1 MHz
Stop
Frequency
Range 1 MHz
Ins. Loss
dB (MAX)
Att. (MIN.) Start
Frequency
Range 2 MHz
Stop
Frequency
Range 2 MHz
Ins. Loss
dB (MAX)
Att. (MIN.) Size mm (typ.) Part No.
MHz dB MHz dB MHz dB MHz dB
2300 2690 1.6 3300 16 4600 25 3300 3900 1.6 2690 16 6600 9 2.0x1.25x0.60 DPX203900DT-9019A1
Discover TDK
WWW.TDK.COM
10
TDK RF Components for WiMAX Applications
TDK’s newest line-up of RF Components for WiMAX applications can be used in
both client and base station designs. These components have been developed to
work in the 2.3GHz, 2.5GHz, 3.5GHz and 700MHz bands.
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX) Coupling
dB Isolation
dB V.S.W.R Size
mm (typ.) Part No.
2300 2700 0.55 -12 +/- 1.5 20 Min. 1.5 1.6X0.8X0.6 HHM2241SA3
2300 2700 0.40 -20 +/- 1.5 32 Min. 1.3 1.6X0.8X0.6 HHM2244SA7
2300 2700 0.40 -16 +/- 1.5 25 Min. 1.3 1.6X0.8X0.6 HHM2245SA3
3400 3600 0.35 -18 +/- 1.5 23 Min. 1.3 1.6X0.8X0.6 HHM2261SA1
Couplers for 2.3GHz, 2.5GHz & 3.5GHz
Discover TDK
WWW.TDK.COM
11
TDK RF Components for WiMAX Applications
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX) Bal. Imped.
ohm Amp. Bal dB
(MAX) Phase Bal Deg Size
mm (typ.) Part No.
2300 2700 1.2 50 1.5 180+/- 10 1.6X0.8X0.6 HHM1710J1
2300 2700 1.2 100 1.5 180+/- 12 1.6X0.8X0.6 HHM1711E1
2500 2700 0.8 100 2.2 180+/- 10 1.6X0.8X0.6 HHM1711K1
2500 2700 0.8 100 2.2 180+/- 10 1.6X0.8X0.6 HHM1791A1
3300 3900 1.2 50 1.5 180+/- 15 1.6X0.8X0.6 HHM1727D1
3300 3900 1.0 75 1.2 180+/- 15 1.6X0.8X0.6 HHM1715E1
Balun Transformers for 2.3GHz, 2.5GHz, 3.5GHz
Multilayer Ceramic Band Pass Filter
Low Pass Filter
Balanced Output Band Pass Filter
Start
Frequency
MHz
Stop
Frequency
MHz
Att. (MIN.) Size mm (typ.) Part No.
MHz dB MHz dB MHz dB MHz dB
2300 2690 1.8 1800 14 3400 14 11700 14 2.0x1.25x0.95 DEA202495BT-1242B2
2401 2690 3.3 1580 35 1980 30 2170 10 4802 25 2.5x2.0x0.95 DEA252546BT-2083B2
2496 2690 2.5 2125 18 2313 18 2992 12 2.5x2.0x0.95 DEA252593BT-2074A3
2500 2700 2.2 915 25 1785 25 1980 15 4900 15 1.6x0.8x0.65 DEA162600BT-1258C2
3300 3900 2.2 2600 15 4400 10 6000 25 2.0x1.25x0.95 DEA203600BT-1240B2
Ins. Loss
dB (MAX)
Start
Frequency
MHz
Stop
Frequency
MHz
Att. (MIN.) Size Part No.
Ins. Loss dB
(MAX) MHz dB MHz dB
2300 2690 0.8 4600 25 6900 25 1.6x0.8x0.6 DEA162690LT-1217A2
2400 2700 0.35 4800 26 7200 23 1.6x0.8x0.6 DEA162700LT-5014A1
3400 3600 0.5 6800 26 7200 26 1.6x0.8x0.6 DEA163600LT-5017A1
Start
Frequency
MHz
Stop
Frequency
MHZ
Ins. Loss
dB (MAX)
Bal.
imped.
ohm
Attenuation (MIN.) Size mm (typ.) Part No.
MHz dB MHz dB MHz dB
2300 2690 2.8 50 960 35 1980 10 4900 30 2.0x1.5x0.95 DEA212495BT-7055A2
2500 2700 3.5 100 960 42 1990 35 2170 25 2.5x2.0x0.95 DEA252600BT-7098A2
Diplexer
Start Fre-
quency Range
1 MHz
Stop
Frequency
Range 1 MHz
Ins. Loss
dB (MAX)
Att. (MIN.) Start
Frequency
Range 2 MHz
Stop
Frequency
Range 2 MHz
Ins. Loss
dB (MAX)
Att. (MIN.) Size mm (typ.) Part No.
MHz dB MHz dB MHz dB MHz dB
2300 2690 1.6 3300 16 4600 25 3300 3900 1.6 2690 16 6600 9 2.0x1.25x0.60 DPX203900DT-9019A1
Discover TDK
WWW.TDK.COM
12
TDK RF Components for WiMAX Applications
Front-End Modules for 802.16e Mobile WiMAX Applications
TDK is developing a series of front end modules for use in mobile WiMAX ap-
plications. TDK is working with the leading WiMAX RF IC manufacturers to
match the FEM’s to the transceiver. Please contact TDK for full specifications.
• Operating Frequency: 2.5 to 2.7 GHz, 2.3GHz and 3.5GHz
• Versions with and without Integrated Output Power Detector
• 50 W Matched RF Ports
• Low Profile LGA Package : 5.0 x 5.6 x 1.1 mm
• Supports 1X2 (1 TX & 2 RX) Configuration
• Multi-Chip Technology: Integrated Power Amplifier and T/R Switch
• Utilizes TDK’s LTCC Technology to embed all required filtering
Ceramic Block Band Pass Filter for 700MHz, 2.3GHz, 2.5GHz, 2.5GHz & 3.5GHz
Circulators for 2.3GHz, 2.5GHz, 2.5GHz & 3.5GHz
Freq. range MHz Ins. Loss dB
(MAX) Isolation dB
(MIN) V.S.W.R.
Z0=50ohm (Max) Max. Handling
Power (W) Size mm (typ.)
2500 - 2700 0.40 20 1.3 100 (Ave) 20x20x8.5 CU1S2001AC-2600
2500 - 2700 0.35 18 1.3 100 (Ave) 19x19x8.0 CU1L1905AC-2600
2500 - 2700 0.35 18 1.3 100 (Ave) 19x25.4x8.0 CU1L1905AT-2600
2500 - 2700 0.80 10 1.6 2.5 5.0x5.0x1.9 CU452A1F-2600-1TE2
3400 - 3600 0.55 18 1.3 100 (Ave) 20x20x8.5 CU1S2001AC-3500
3400 - 3600 0.35 18 1.3 100 (Ave) 19x19x8.0 CU1L1905AC-3500
3400 - 3600 0.35 18 1.3 100 (Ave) 19x25.4x8.0 CU1L1905AT-3500
3400 - 3600 1.00 10 1.8 2.5 5.0x5.0x1.9 CU452A1F-3500-1TE2
Part No.
Start Frequency
MHz Stop Frequency
MHz Ins. Loss
dB (MAX) Att. (MIN.) Size mm (typ.)
MHz dB MHz dB MHz dB
700 750 2.2 650 30 800 25 1000 40 13.2x10x3.6 S0465D
2490 2710 1.2 1800 44 3400 42 4400 38 8.0x3.0x3.5 S0486A
3230 3410 1.2 1800 56 2462 45 4400 37 8.0x3.0x3.5 S0486B
3390 3660 1.2 1800 58 2462 45 4400 40 8.0x3.0x3.5 S0486C
3590 3810 1.2 1800 58 2462 45 4400 48 8.0x3.0x3.5 S0486D
Part No.
Discover TDK
WWW.TDK.COM
9
MULTILAYER Band Pass Filter (Balance ou t put Type)
P/N: DEA 252450BT-7022B1
For Bluetooth and 2.4Ghz W-LAN
MECHANICAL DIMENSIONS
Top View
RF Components for Bluetooth Applications
Parameter Specification Typical Value Unit
Frequency Range (Pass Band) 2400-2500 — MHz
Unbalanced Port Characteristics Impedance 50 (nominal) — Ω
Balanced Port Characteristics Impedance 100 (nominal) — Ω
Unbalanced Port Return Loss 9.5 min — dB
Insertion Loss (Pass Band)
+25°C 3.0 max 2.7 dB
-40 — +85°C 3.0 max 3.0 dB
Ripple (Pass Band) 1.0 max 0.2 dB
Attenuation
880-960MHz 48 min 52 dB
1710-1880MHz 45 min 51 dB
1880-1980MHz 40 min 54 dB
2110-2170MHz 25 min 33 dB
4800-5000MHz 30 min 38 dB
Amplitude Impedance at Balanced Port 1.0 max -0.2 dB
Phase Differences at Balanced Port +25°C 180±8 183 Deg
-40 — +85°C 180±10 — Deg
Electrical Characteristics
PIN ASSIGNMENT PIN No.
Unbalanced 1
Balanced 4,5
GND 3,6
DC feed or RF GND 2
PIN CONFIGURATION
2.4GHz Balanced Output Band Pass Filters
Start
Fre-
quency
MHz
Stop
Frequency
MHz
Bal. imped.
ohm Ins. Loss
dB (MAX)
Attenuation (MIN.) Amp. bal .
dB (MAX) Phase bal.
deg
Return
Loss dB
(MIN) Size mm (typ.) Part No.
MHz dB MHz dB MHz dB
2400 2500 50 2.4 1710 25 1920 25 4800 15 0 ± 2.0 180 ± 20 10 2.5x2.0x0.95 DEA252450BT-7001B1
2400 2500 50 1.7 1710 32 1910 32 4800 30 0 ± 1.0 180 ± 15 10 2.5x2.0x0.95 DEA252450BT-7014D1
2400 2500 100 1.9 1710 32 1910 32 4800 30 0 ± 1.0 180 ± 12 10 2.5x2.0x0.95 DEA252450BT-7012D1
2400 2500 100 3.0 1710 45 2170 25 4800 30 0 ± 1.0 180 ± 8 9.5 2.5x2.0x0.95 DEA252450BT-7022B1
2400 2500 CSR BC3 3.3 1710 48 2170 30 4800 25 0 ± 1.0 180 ± 8 8.0 2.5x2.0x0.95 DEA252450BT-7035B2
2402 2480 Infineon 3.5 1710 40 2170 30 4804 30 0 ± 1.5 180 ± 10 9.0 2.5x2.0x0.95 DEA252441BT-7053D2
2400 2500 50 2.7 1710 33 1910 37 2170 10 0 ± 1.5 180 ± 15 10 2.0x1.5x0.95 DEA212450BT-7031A1
2400 2500 ST STLC2500 3.6 1710 28 2170 17 4800 15 0 ± 2.0 180 ± 10 10 2.0x1.5x0.95 DEA212450BT-7043C1
2400 2500 50 2.0 1710 25 4800 25 7200 15 0 ± 1.5 180 ± 15 9.0 2.0x1.25x0.95 DEA202450BT-7116E1
2400 2500 100 3.5 1710 35 2170 25 0 ± 1.0 180 ± 10 10.0 2.0x1.25x0.75 DEA202450BT-7054B1
2402 2480 CSR BC4 2.0x1.25x0.65 DEA202450BT-7041E1
2402 2480 CSR BC4 & 5 3.0 1710 22 1910 20 4804 18 0 ± 2.0 180 ± 10 8.5 2.0x1.25x0.7 DEA202450BT-7099A1
2402 2480 CSR BC4 & 6 3.0 1710 22 1910 20 4804 18 0 ± 2.0 180 ± 10 8.5 2.0x1.25x0.7 DEA202450BT-7118A1
2400 2500 CSR BC3 3.5 1710 38 2170 17 4800 25 0 ± 1.0 180 ± 10 9.0 2.0x1.25x0.95 DEA202450BT-7077A1
2400 2500 ST STLC2500 3.4 1710 39 2168 20 4800 26 0 ± 2.0 180 ± 10 8.5 2.0x1.25x0.92 DEA202450BT-7089C3
2402 2480 ST STLC2500 2.0 1700 20 2000 15 7206 25 0 ± 2.0 180+15/-10 7.0 2.0x1.25x0.92 DEA202450BT-7081A1
2402 2480 ST STLC2500 2.5 1710 40 1910 40 4800 25 0 ± 2.0 180 ± 10 9.0 2.0x1.25x0.92 DEA202450BT-7112B1
Match to CSR BC4
Discover TDK
WWW.TDK.COM
8
Base band
Switch
Transceiver
BPF
ANT
Balun
Balanced output BPF
Balanced impedance is
optimized to match IC
TDK has designed a series of Balanced Output BPF’s that are optimized to match the
impedance requirements of Bluetooth IC’s.
TDK RF components can be used in different architectures (see Example 1 & 2).
Please refer to page 5 for 2.4GHz BPF information and page 7 for 2.4GHz balun
information.
TDK RF Components are recommended by leading Bluetooth chipset manufacturers.
RF Components for Bluetooth Applications
Discover TDK
WWW.TDK.COM
13
TDK RF Components for GPS Applications
TDK has developed a new series of RF components for use in GPS systems.
In addition to the components listed below TDK has a variety of Antennas
for use in GPS Applications.
Please Contact TDK for more information.
ITEM size Insertion Loss Attenuation Return Loss System Part No.
dB MHz dB MHz dB MHz
BPF Band Pass
Filter 4.3x4.9x2.1max 3.5max 1573.42-1577.42
21min
20min
30min
30min
35min
50min
1525.42
1625.42
1475.42
1675.42
1710-1785
1850-1910
9.54min 1573.42-1577.42 GPS CF61A7301B
Diplexer
Low band
(Low Pass
Filter) 2.0x1.25x1.05max
0.65max 824-894 20min 824-894 10min 824-894 CDMA800 Tx/Rx
DPX201990DT-4012A1
High band
(High Pass
Filter) 0.70max 1574-1576
1850-1990 20min 1574-1576
1850-1990 10min 1574-1576
1850-1990
GPS
+
CDMA1900 Tx/Rx
Low band
(Low Pass
Filter) 1.6x0.8x0. 7max
0.60max 806-941
16min
18min
14min
5min
1575
1612-1648
1792-1856
2000-3000
14min 806-941 iDEN
DPX161576DT-8011B1
High band
(High Pass
Filter) 0.70max 1574.42-1576.42 20min 806-928 14min 1574.42-
1576.42 GPS
Low band
(Low Pass
Filter) 1.6x0.8x0. 7max
0.73typ 1565-1585 21.7typ 2400-2500 15.3typ 1565-1585 GPS
DPX162500DT-8014A1
High band
(High Pass
Filter) 0.87typ 2400-2500 32.7typ 1565-1585 15.1typ 2400-2500 Bluetooth
Low band
(Low Pass
Filter)
1.6x0.8x0.7max
0.73typ 1574-1576 22.3typ 2402-2480 17.3typ 1574-1576 GPS
DPX162500DT-8014B2
High band
(High Pass
Filter) 0.85typ 2402-2480
20.7typ
20.6typ
33.2typ
6.3typ
824-894
880-960
1574-1576
1710-1880
14.0typ 2402-2480 Bluetooth
Low band
(Low Pass
Filter) 1.6x0.8x0. 7max
0.72typ 1565-1585 23.4typ 2110-2170 20.5typ 1565-1585 GPS
DPX162170DT-8015A1
High band
(High Pass
Filter) 0.86typ 2110-2170 21.6typ 1565-1585 12.0typ 2110-2170 UMTS(BC1) Rx
Low band
(Low Pass
Filter) 1.6x0.8x0. 7max
0.84typ 1565-1585 24.6typ 2110-2170 15.8typ 1565-1585 GPS
High band
(High Pass
Filter) 1.22typ 2110-2170 32.0typ 1565-1585 14.9typ 2110-2170 UMTS(BC1) Rx
DPX162170DT-8016A1
Discover TDK
WWW.TDK.COM
14
TDK Services for UWB Wireless Systems
Band Ite m Size (mm) Impedance Pass Band
(MHz) Insertion Loss Attenuation (typ.)
2450MHz 5150MHz 7000MHz
Band1-3
(3168-4752MHz)
Balun
2.0x1.25 t=1.05 MAX 50/100 ohm 3100-4900 1.0dB MAX --- --- --- HHM1583B1
2.0x1.25 t=1.05 MAX 50/100 ohm 3100-4900 1.0dB MAX --- --- --- HHM1596A1
1.6x0.8 t=0.7 MAX 50/100 ohm 3100-4900 1.2dB MAX --- --- --- HHM1775B1
BPF
4.5x3.2 t=0.9 MAX 50/50ohm 3168-4752 1.7dB MAX 45dB 28dB 32dB DEA453960BT-3002B1
4.5x3.2 t=0.9 MAX 50/50ohm 3168-4752 1.9dB MAX 48dB 19dB 33dB DEA453960BT-3007B1
3.2x2.5 t=0.85 MAX 50/50ohm 3168-4752 1.7dB typ. 25dB 25dB 32dB DEA323960BT-3008A3
2.0x1.25 t=0.8 MAX 50/50ohm 3168-4752 2.2dB typ. 16dB 21dB 32dB DEA203960BT-3016A1
Balance
BPF 2.5x2.0 t=1.0 MAX 50/100ohm 3168-4752 3.5dB typ. 24dB 7dB 20dB DEA253960BT-7113A1
Band3
(4224-4752MHz)
BPF 2.0x1.25 t=1.0 MAX 50/50ohm 4224-4752 1.5dB typ. 50dB 15dB 30dB DEA204488BT-3012A1
Balance
BPF 2.5x2.0 t=1.0 MAX 50/100ohm 4224-4752 2.6dB typ. 46dB 28dB 40dB DEA254488BT-7114A1
Band1-8
(3168-7656MHz) Balun 2.0x1.25 t=1.05 MAX 50/100 ohm 3000-8000 1.5dB MAX --- --- --- HHM1595A1
Band6-9
(6336-7920MHz) BPF 3.2x2.5 t=1.3 MAX 50/50ohm 6336-7920 2.3dB typ. 53dB 32dB --- DEA327128BT-3015B1
Band8-10
(7250-9000MHz) Balance
BPF 2.5x2.0 t=1.0 MAX 50/100 ohm 7250-9000 2. 5dB typ 45dB 45dB --- DEA258125BT-7096C1
WLAN+Band1-3
(3168-4752MHz) DPX 2.0x1.25 t=1.05 MAX 50/50 ohm 2300-2500
3168-4752 1.1dB MAX(L)
1.2dB MAX(H) 25dB 30dB --- DPX204752DT-4028A1
WLAN+Band1-11
(3168-8976MHz) DPX 2.0x1.25 t=1.05 MAX 50/50 ohm 2300-2500
3168-8976 1.0dB typ. (L)
1.1dB typ. (H) 25dB 40dB --- DPX204752DT-4040B1
Band1-3+Band7-11
(3168-4752MHz)
(6336-8976MHz) DPX 4.5x3.2 t=1.00 MAX 50/50 ohm 3168-4752
6336-8976 2.8dB MAX(L)
3.3dB MAX(H) 30dB 15dB --- DPX458976DT-0010A1
TDK Part No.
TDK brings together various technologies required to develop and manufacture
advanced wireless products, systems and equipment. TDK provides key building
blocks necessary to bring Wireless USB and other Ultra Wide Band products to
market.
TDK components & services for UWB Technology include:
Antennas
Baluns
Band Pass Filters
Diplexers
EMI Filters
Test Systems & Services
Anechoic Chambers
Inductors & Capacitors
Standard RF Components Line-up for UWB:
Discover TDK
WWW.TDK.COM
7
RF Components for WLAN Applications
2.4GHz Balun Transformers
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX) Bal. Imped.
ohm Amp. Bal dB
(MAX) Phase Bal Deg Size
mm (typ.) Part No.
5150 5875 1.0 100 2.0 180+/- 10 2.0X1.2X0.95 HHM1562B
4900 5950 1.0 100 2.0 180+/- 10 2.0X1.2X0.95 HHM1570B1
4900 5950 1.2 50 1.0 180+/- 10 1.6X0.8X0.6 HHM1733B1
4900 5950 1.0 100 2.0 180+/- 10 1.6X0.8X0.6 HHM1732B1
4900 5950 1.2 200 1.5 180+/- 10 1.6X0.8X0.6 HHM1752A2
5GHz Balun Transformers
2.4GHz Coupler and Coupler with LPF
Start Frequency
MHz Stop Frequency
MHz Ins. Loss
dB (MAX) Bal. Imped.
Ohm Amp. Bal. dB
(MAX) Phase Bal. Deg. R. Loss dB
(MIN) Size mm (typ) Part No.
2400 2500 1.2 50 0 ± 2.0 180 ± 10 10 2.0x1.25x0.95 HHM1517
2400 2500 1.0 75 0 ± 1.5 180 ± 10 10 2.0x1.25x0.95 HHM1541E1
2400 2500 1.0 100 0 ± 2.0 180 ± 10 10 2.0x1.25x0.95 HHM1520
2400 2500 1.0 200 0 ± 2.0 180 ± 10 10 2.0x1.25x0.95 HHM1521
2300 2500 1.2 50 0 ± 2.0 180 ± 10 10 2.0x1.25x0.95 HHM1517A2
2300 2500 1.0 75 0 ± 2.0 180 ± 10 10 2.0x1.25x0.95 HHM1541E2
2300 2500 1.0 100 0 ± 2.0 180 ± 10 10 2.0x1.25x0.95 HHM1520A2
2300 2500 1.1 200 0 ± 2.0 180 ± 10 9.5 2.0x1.25x0.95 HHM1521A2
2400 2500 1.2 50 0 ± 2.0 180 ± 10 10 1.6x0.8x0.6 HHM1710D1
2400 2500 1.2 100 0 ± 2.0 180 ± 10 10 1.6x0.8x0.6 HHM1711D1
2400 2500 1.2 150 0 ± 2.0 180 ± 10 10 1.6x0.8x0.6 HHM1712D1
2400 2500 1.2 200 0 ± 1.7 180 ± 10 10 1.6x0.8x0.6 HHM1713E2
2400 2500 1.0 50 0 ± 2.0 180 ± 10 10 1.0x0.5x0.45 HHM1902A1
2400 2500 1.0 100 0 ± 2.0 180 ± 10 10 1.0x0.5x0.45 HHM1903A1
2400 2500 1.0 75 0 ± 2.0 180 ± 10 10 1.0x0.5x0.45 HHM1904A1
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX) Coupling dB Isolation
(MIN) VSWR
(MAX) Att. (MIN.) Size mm (typ.)
MHz dB MHz dB
2400 2500 0.74 10.5 ± 1.0 23 1.4 - - - - 1.6x0.8x0.6 HHM2240SA1
2400 2500 0.45 12.0 ± 1.0 22 1.5 - - - - 1.6x0.8x0.6 HHM2241SA1
2400 2500 0.45 13.0 ± 1.0 25 1.5 - - - - 1.6x0.8x0.6 HHM2242SA1
2400 2500 0.40 14.5 ± 1.0 25 1.7 - - - - 1.6x0.8x0.6 HHM2243SA1
2400 2500 0.35 16.0 ± 1.0 25 1.3 - - - - 1.6x0.8x0.6 HHM2245SA1
2400 2500 0.35 17.0 ± 1.0 30 1.3 - - - - 1.6x0.8x0.6 HHM2246SA1
2400 2500 0.30 20.0 ± 1.0 38 1.3 - - - - 1.6x0.8x0.6 HHM2244SA1
2400 2500 0.35 20.0 ± 1.0 25 1.4 4800-5000 20 7200-7500 20 2.0x1.25x0.95 HHM2618A1
Part No.
Discover TDK
WWW.TDK.COM
6
RF Components for WLAN Applications
Sample Specification : DEA255425BT-2028A4
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX) Attenuation (MIN.) Size
mm (typ.) Part No.
MHz dB MHz dB MHz dB
5150 5900 2.2 3450 35 1.6X0.8X0.6 DEA165487BT-1202
5150 5900 1.5 3450 35 2.0X1.2X0.9 DEA205437BT-1200
4900 5950 1.5 3450 25 9800 17 2.0X1.2X0.9 DEA205425BT-1209B2
4900 5950 2.0 3300 40 4000 25 7300 14 2.0X1.2X0.95 DEA205425BT-2028A4
4900 5850 1.2 824 50 1910 50 9800 15 2.5X2.0X0.9 DEA255375BT-2076A1
4940 5850 3.5 2700 40 4650 20 7250 30 2.5X2.0X1.0 DEA255395BT-2065D2
5GHz Multilayer Band Pass Filter
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX) Attenuation (MIN.) Size
mm (typ.) Part No.
MHz dB MHz dB MHz dB
5125 5725 1.5 6800 12 10250 25 11450 25 1.6X0.8X0.8 DEA165725LT-1196A2
4900 5950 0.7 9800 20 11900 30 1.6X0.8X0.8 DEA165850LT-1197B2
5GHz Low Pass Filter
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX) Bal. Imped.
ohm Attenuation (MIN.) Size
mm (typ.) Part No.
MHz dB MHz dB
4900 5950 2.8 100 4000 30 8000 20 2.0X1.5X1.3 DEA215425BT-7075C2
5GHz Balanced Output Band Pass Filter
Parameter Freq. (MHz) Specification Unit
Min. Max. TYP
1 Center Frequency 5425 — — — —
2 Insertion Loss 4900-5950 — 1.6 2.0 dB
3 Insertion Loss
-40 ~ +85 °C 4900-5950 — 1.9 2.3 dB
4 Return Loss 4900-5950 9 11 — dB
5 Attenuation 1280-3300 40 50 — dB
6 Attenuation 3300-4000 25 33 — dB
7 Attenuation 4375-4465 7 12 — dB
No.
8 Attenuation 7300-8930 14 18 — dB
9 Attenuation 9800-11900 25 38 — dB
Electrical Characteristics at 25deg C
Discover TDK
WWW.TDK.COM
15
TDK RF Components for UWB Applications
TDK Band Pass Filters for UWB are available in a performance and a reduced footprint version. The performance version is for applications
requiring maximum attenuation at 2.4GHz and 5GHz applications. Reduced footprint series is for applications requiring minimum attenuation.
Please contact TDK for full spec sheets and application notes.
UWB-Typi cal Data (De- em bedded)
-60
-50
-40
-30
-20
-10
0
500 1500 2500 3500 4500 5500 6500 7500 8500 9500
Frquency ( M Hz)
Gain (dB)
WiMedia
Band Group 3
TDK B
TDK BAND
AND P
PASS
ASS F
FILTERS
ILTERS
FOR
FOR UWB A
UWB APPLICATIONS
PPLICATIONS
DEA-3002B1
[MECHANICAL DIMENSIONS]
DEA-3015B1
WiMedia
Band Group
Discover TDK
WWW.TDK.COM
16
TDK Balanced Antenna for Use in UWB Applications
TDK has developed a multilayer chip antenna with a patented balanced radiator structure. The
antenna’s unique structure allows it to maintain similar performance regardless of ground plane
size. Unlike monopole antennas, which are dependent on ground plane size, this antenna has
been designed for ease of integration in various applications without the worry of complex
board re-designs. It is ideal for use in CardBus, CompactFlash or USB designs.
Contact TDK for full spec sheets and application notes
Radiation Patterns
There is a significant difference in ground plane
size but almost no difference in VSWR results.
The antenna bandwidth is not detuned by
changing the ground plane size.
TDK RF Components for UWB Applications
Parameter Value Unit
Operation Frequency 3.1—5.2 GHz
Polarization Linear (Mixed) None
Antenna Gain 2.0 (typ.) dBi
Impedance 50 ohm
VSWR 3 (Max) None
Electrical Specifications
Discover TDK
WWW.TDK.COM
5
Sample Specification : DEA252450BT-2024C2
RF Components for WLAN Applications
2.4GHz Band Pass Filter
2.4GHz Low Pass Filter
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX) Attenuation (MIN.) Size
mm (typ.) Part No.
MHz dB MHz dB MHz dB
2400 2500 0.42 4800 25 5000 25 7200 18 1.6X0.8X0.6 DEA162500LT-1212A1
2300 2500 0.48 4800 35 5000 35 7200 25 1.6X0.8X0.6 DEA162500LT-1217A1
2.4GHz High Pass Filter
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX) Attenuation (MIN.) Size
mm (typ.) Part No.
MHz dB MHz dB MHz dB
2400 2484 0.75 920 25 1790 17 1915 20 2.0X1.2X1.0 DEA202484HT-8002A1
2400 2500 1.4 920 25 1790 18 1915 18 1.6X0.8X0.6 DEA162400HT-8004B1
Parameter Freq. (MHz) Specification Unit
Min. Max. TYP
1 Insertion Loss 2400-2480 — 3.0 2.29 dB
2 Return Loss 2400-2480 10.0 — 13.7 dB
3 Attenuation 880-960 50.0 — 53.8 dB
4 Attenuation 1565-1585 50.0 — 54.7 dB
5 Attenuation 1710-1880 48.0 — 58.3 dB
6 Attenuation 1930-1990 48.0 — 65.5 dB
7 Attenuation 2110-2170 22.0 — 33.6 dB
No.
Electrical Characteristics at 25deg C
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX) Attenuation (MIN.) Size mm (typ.) Part No.
MHz dB MHz dB MHz dB MHz dB
2400 2500 1.2 915 35 1785 35 1910 35 4800 30 2.5x2.0x0.95
2400 2500 1.5 915 35 1750 30 2100 20 4800 23 2.5x2.0x0.95 DEA252450BT-2031A1
2400 2500 2.1 915 45 1990 48 2170 20 4800 30 2.5x2.0x0.95 DEA252450BT-2024C1
2400 2500 3.0 960 50 1585 50 1990 48 2170 22 2.5x2.0x0.95 DEA252450BT-2024C2
2400 2500 3.0 960 50 1585 50 1880 40 1990 40 2.5x2.0x0.95 DEA252450BT-2024D4
2400 2500 2.5 915 47 1710 47 2170 35 4800 30 2.5x2.0x0.95 DEA252450BT-2063C1
2400 2500 1.5 1900 30 2.0x1.25x0.95 DEA202450BT-1251A1
2400 2500 1.5 1300 25 2000 10 3000 12 3600 30 2.0x1.25x0.95 DEA202450BT-1213C1
2400 2500 3.2 800 40 1910 35 2170 23 4800 25 2.0x1.25x0.70 DEA202450BT-2068A1
2400 2500 2.5 915 40 1710 40 1910 40 4800 30 2.0x1.25x0.70 DEA202450BT-3201B2
2400 2500 2.6 960 40 1710 40 2170 20 4800 30 2.0x1.25x0.95 DEA202450BT-2038A1
2400 2500 3.0 915 32 1250 30 1900 30 4800 25 1.6x0.8x0.60 DEA162450BT-1210A1
2400 2500 2.0 915 25 1710 25 1910 25 4800 20 1.6x0.8x0.60 DEA162450BT-1241A1
2400 2500 2.2 960 25 1600 15 3200 22 4800 25 1.6x0.8x0.60 DEA162450BT-1260B2
2400 2500 2.0 915 25 1710 20 1910 20 4800 20 1.6x0.8x0.55 DEA162450BT-1247B1
2400 2500 2.5 915 25 1710 20 1910 20 4800 25 1.6x0.8x0.55 DEA162450BT-1247C1
2300 2500 1.4 915 35 1785 35 1910 35 4800 30 2.5x2.0x0.95 DEA252400BT-2030A1
DEA252450BT-2027A1
Discover TDK
WWW.TDK.COM
4
RF Components for WLAN Applications
Please contact TDK for evaluation samples and detailed specifications.
Start
Frequency
MHz
Stop
Frequency
MHz
Ins. Loss
dB (MAX)
Start
Frequency
MHz
Stop
Frequency
MHz
Insertion Loss
dB (MAX) Part Number
2300 2500 0.65 4900 5950 1.4 DPX205950DT-9008A1
2300 2500 0.65 4900 5950 1.4 DPX205950DT-9108A1
2400 2500 0.5 4900 5850 0.75 DPX205850DT-4027B1
Size
mm (typ.)
2.0x1.25x0.95
2.0x1.25x0.95
2.0x1.25x0.95
Diplexer for 2.4GHz & 5GHz
TDK WLAN components provide leading edge miniaturization technology while
providing exceptional electrical characteristics. TDK RF Components are
recommended by leading WLAN chipset manufacturers.
The following pages list our standard BPF’s, LPF’s, HPF’s, diplexers and baluns
for 2.4GHz & 5GHz WLAN.
Discover TDK
WWW.TDK.COM
17
TDK’s advanced wireless radio testing services have been used by leading UWB chipset companies for both,
FCC compliance and UWB transceiver development. TDK provides complete regulatory compliance testing,
report preparation and submission.
Let TDK work with you to develop test and measurement solution for your Certified Wireless USB products.
UWB transceiver testing requires measurements spanning
wide frequency and dynamic ranges. TDK provides FCC
compliance testing using specialized instrumentation and
an optimized facility to provide test reports.
FCC granted UWB transceiver
General Atomics: AEVK-1
Wisair: DV9100
3D radiation pattern of typical dipole antenna.
Antenna performance is an important part of the UWB solution.
TDK performs antenna analysis for high performance Certified
Wireless USB transceiver development.
TDK supports the complete FCC submission process.
TDK Test Labs
located in
Austin & Tokyo
TDK Compliance Test Services & Expertise For UWB Wireless Systems
TDK Services for UWB Wireless Systems
TDK Test & Measurement Solutions for Your UWB Wireless System
UWB
UWB-
-EMC Test System
EMC Test System
UWB-EMC test system (for test and measurement of radi-
ated emission from UWB radio) Ultra wide frequency meas-
urement required FCC compliance test.
Ultra wide dynamic ranges for UWB test which radiate very
low power emission.
TDK’s original anechoic chamber, antenna, and software
based test system.
Possible to upgrade your EMC test systems to state-of-the-
art UWB-EMC test system.
3m chamber (FCC comply, 9x6x5.7m)
Compact chamber (FCC comply, 7x4x3m)
TDK’s original hybrid anechoic chamber
Test system for measurement up to 40GHz
Hardware, software, & training are included
TDK Offers Complete Turnkey Systems of Anechoic Chambers
TDK offers a "single vendor" solution for test facilities by offering both systems and test chambers. Offering a TDK line of turn-
key 3 meter, 5 meter, 10 meter, and compact anechoic chamber solutions based on top-performing TDK absorber technologies.
Each facility is built with high-performance radio wave absorbing materials selected specifically to match your test requirements
and manage the implementation of both systems and chambers to deliver a turnkey test facility that is tightly integrated.
Anechoic chambers for EMC Testing:
3m type (FCC comply, 9x6x5.7m) or compact type (FCC comply,7x4x3m)
TDK’s high performance electromagnetic absorber material
(IB-015 and IP-045 absorber)
Automatically controlled turntable and antenna mast via optical fiber.
Normalized Site Attenuation (NSA) measurement for compliance.
Anechoic Chamber for Antenna Testing
Anechoic chamber (compact type, 7x4x4m)
TDK’s high performance electromagnetic absorber material (IS-060 absorber)
TDK’ original oblique incident absorber, IS-SM050, for exceptional absorption
performance
Quiet zone (QZ) measurement
TDK Services for UWB Wireless Systems
Discover TDK
WWW.TDK.COM
18
Discover TDK
WWW.TDK.COM
Table of Contents
TDK offers a series of RF components for a variety of wireless applications.
From filters and antennas to test services and anechoic chambers,
TDK has a solution for you.
● WLAN SOLUTIONS PAGE 04
● BLUETOOTH SOLUTIONS PAGE 08
● WiMAX Solutions Page 10
● GPS SOLUTIONS PAGE 13
● UWB SOLUTIONS PAGE 14
Discover TDK
WWW.TDK.COM
For samples, datasheets and additional product information on
these and other TDK Wireless Solutions . . .
TDK Corporation of America
1221 Business Center Drive, Mount Prospect, IL 60056
Phone: +1 (847) 803-6100
Fax: +1 (847) 803-1125
Email: wirelessinfo@tdktca.com
Visit our website: WWW.TDK.COM
Discover TDK Solutions
RF Components for Wireless Applications
Discover TDK Solutions
RF Components for Wireless Applications
● Band Pass Filters
● Diplexer s
● Low Pass Filters
● Couplers
● High Frequency Inductors
● Circulators/ Isolators
● Baluns
● Antennas
● High Pass Filters
● Test Services
● Test Equipment
● Anechoic Chambers
Discover TDK
WWW.TDK.COM
TDK RF Components & Services :
