HZU-L Series Silicon Epitaxial Planar Zener Diode for Low Noise Application REJ03G0043-0100Z Rev.1.00 Jun.05.2003 Features * Diode noise level of this series is approximately 1/3-1/10 lower than the HZ series. * Low leakage and low zener impedance. * Wide spectrum from 5.2V through 38V of zener voltage provide flexible application. * Ultra small Resin Package (URP) is suitable for surface mount design. Ordering Information Type No. Mark Package Code HZU-L Series Type No. URP Pin Arrangement Cathode mark Mark 1 61 2 1. Cathode 2. Anode Rev.1.00, Jun.05.2003, page 1 of 8 HZU-L Series Absolute Maximum Ratings (Ta = 25C) Item Symbol Value Unit Power dissipation Pd 150 mW Junction temperature Tj 150 C Storage temperature Tstg -55 to +150 C Electrical Characteristics (Ta = 25C) Zener Voltage VZ (V)* HZU6L HZU7L 1 Reverse Current Dynamic Resistance ESD-Capability Test Test A) Condition rd ( ) Condition IR ( Test Condition (V) * Grade Min Max IZ (mA) Max VR (V) Max IZ (mA) Min A1 5.2 5.5 0.5 1 2.0 150 0.5 200 A2 5.3 5.6 A3 5.4 5.7 B1 5.5 5.8 80 0.5 B2 5.6 5.9 B3 5.7 6.0 C1 5.8 6.1 60 0.5 C2 6.0 6.3 C3 6.1 6.4 A1 6.3 6.6 60 0.5 A2 6.4 6.7 A3 6.6 6.9 B1 6.7 7.0 B2 6.9 7.2 B3 7.0 7.3 C1 7.2 7.6 C2 7.3 7.7 C3 7.5 7.9 0.5 1 3.5 Notes: 1. Tested with DC. 2. C = 200 pF, R = 0 , Both forward and reverse direction 1 pulse. Failure criterion ; According to IR spec. Rev.1.00, Jun.05.2003, page 2 of 8 200 2 HZU-L Series Zener Voltage VZ (V)* 1 Reverse Current Dynamic Resistance ESD-Capability Test Test A) Condition rd ( ) Condition IR ( Test Condition (V) * Type Grade Min Max IZ (mA) Max VR (V) Max IZ (mA) Min HZU9L A1 7.7 8.1 0.5 1 6.0 60 0.5 200 A2 7.9 8.3 A3 8.1 8.5 B1 8.3 8.7 B2 8.5 8.9 B3 8.7 9.1 C1 8.9 9.3 C2 9.1 9.5 C3 9.3 9.7 A1 9.5 9.9 0.5 1 8.0 80 0.5 200 A2 9.7 10.1 A3 9.9 10.3 B1 10.2 10.6 B2 10.4 10.8 B3 10.7 11.1 C1 10.9 11.3 C2 11.1 11.6 C3 11.4 11.9 A1 11.6 12.1 0.5 1 10.5 80 0.5 200 A2 11.9 12.4 A3 12.2 12.7 B1 12.4 12.9 B2 12.6 13.1 B3 12.9 13.4 C1 13.2 13.7 C2 13.5 14.0 C3 13.8 14.3 1 14.1 14.7 0.5 1 13.0 80 0.5 200 2 14.5 15.1 3 14.9 15.5 1 15.3 15.9 0.5 1 14.0 80 0.5 200 2 15.7 16.5 3 16.3 17.1 HZU11L HZU12L HZU15L HZU16L Notes: 1. Tested with DC. 2. C = 200 pF, R = 0 , Both forward and reverse direction 1 pulse. Failure criterion ; According to IR spec. Rev.1.00, Jun.05.2003, page 3 of 8 2 HZU-L Series Zener Voltage VZ (V)* 1 Reverse Current Dynamic Resistance ESD-Capability Test Test Condition IR ( A) Condition rd ( ) Test Condition (V) * Type Grade Min Max IZ (mA) Max VR (V) Max IZ (mA) Min HZU18L 1 16.9 17.7 0.5 1 15.0 80 0.5 200 2 17.5 18.3 3 18.1 19.0 1 18.8 19.7 0.5 1 18.0 100 0.5 200 2 19.5 20.4 3 20.2 21.1 1 20.9 21.9 0.5 1 20.0 100 0.5 200 2 21.6 22.6 3 22.3 23.3 1 22.9 24.0 0.5 1 22.0 120 0.5 200 2 23.6 24.7 3 24.3 25.5 1 25.2 26.6 0.5 1 24.0 150 0.5 200 2 26.2 27.6 3 27.2 28.6 1 28.2 29.6 0.5 1 27.0 200 0.5 200 2 29.2 30.6 3 30.2 31.6 1 31.2 32.6 0.5 1 30.0 250 0.5 200 2 32.2 33.6 0.5 1 33.0 300 0.5 200 HZU20L HZU22L HZU24L HZU27L HZU30L HZU33L HZU36L 3 33.2 34.6 1 34.2 35.7 2 35.3 36.8 3 36.4 38.0 Notes: 1. Tested with DC. 2. C = 200 pF, R = 0 , Both forward and reverse direction 1 pulse. Failure criterion ; According to IR spec. Rev.1.00, Jun.05.2003, page 4 of 8 2 HZU-L Series Mark Code Type Grade Mark No. Type Grade Mark No. Type Grade Mark No. HZU6L A1 61 HZU11L A1 111 HZU20L -1 201 A2 62 A2 112 -2 202 A3 63 A3 113 -3 203 B1 64 B1 114 -1 221 B2 65 B2 115 -2 222 B3 66 B3 116 -3 223 C1 67 C1 117 -1 241 C2 68 C2 118 -2 242 HZU6L HZU9L C3 69 A1 71 C3 119 A1 121 A2 72 A2 A3 73 B1 HZU22L HZU24L -3 243 -1 271 122 -2 272 A3 123 -3 273 74 B1 124 -1 301 B2 75 B2 125 -2 302 B3 76 B3 126 -3 303 C1 77 C1 127 -1 331 C2 78 C2 128 -2 332 C3 79 C3 129 -3 333 A1 91 -1 151 -1 361 A2 92 -2 152 -2 362 A3 93 -3 153 -3 363 B1 94 -1 161 B2 95 -2 162 B3 96 -3 163 C1 97 -1 181 C2 98 -2 182 C3 99 -3 183 HZU12L HZU15L HZU16L HZU18L Notes: 1. Example of Marking (1) HZU6A1L to HZU9C3L Example of Marking HZU27L HZU30L HZU33L HZU36L (2) HZU11A1L to HZU36-3L Example of Marking 61 HZU6A1L 2. Type No. is as follows; HZU6A1L, HZU6A2L, *** HZU12C3L 3. Type No. is as follows; HZU15 - 1L, HZU15 - 2L, *** HZU36 - 3L Rev.1.00, Jun.05.2003, page 5 of 8 111 HZU11A1L HZU-L Series Main Characteristic 10-4 HZU36-2L HZU30-2L HZU24-2L HZU20-2L HZU16-2L HZU12B2L Zener Current IZ (A) 10-3 HZU9B2L HZU6B2L 10-2 10-5 10-6 10-7 10-8 0 5 10 15 20 25 30 35 40 Zener Voltage VZ (V) Fig.1 Zener current vs. Zener voltage 0.10 50 %/C 0.04 20 mV/C 0.02 10 0 0 -0.02 -10 -0.04 -20 -0.06 -30 -0.08 -40 0 5 0.8mm -50 10 15 20 25 30 35 40 200 0.8mm 30 Power Dissipation Pd (mW) 0.06 -0.10 1.5mm 40 Zener Voltage Temperature Coefficient Z (mV/C) Zener Voltage Temperature Coefficient Z (%/C) 0.08 250 Cu Foil 150 Printed circuit board 15 x 20 x1.6t mm Material: Glass Epoxy Resin +Cu Foil 100 50 0 0 50 100 150 200 Zener Voltage VZ (V) Ambient Temperature Ta (C) Fig.2 Temperature Coefficient vs. Zener voltage Fig.3 Power Dissipation vs. Ambient Temperature Rev.1.00, Jun.05.2003, page 6 of 8 HZU-L Series Package Dimensions As of January, 2003 Rev.1.00, Jun.05.2003, page 7 of 8 0.9 0.15 0 - 0.10 1.25 0.15 1.7 0.15 2.5 0.15 0.3 0.15 Unit: mm Package Code JEDEC JEITA Mass (reference value) URP Conforms -- 0.004 g HZU-L Series Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Keep safety first in your circuit designs! 1. Renesas Technology Corporation puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corporation product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corporation or a third party. 2. Renesas Technology Corporation assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corporation without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corporation or an authorized Renesas Technology Corporation product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corporation assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corporation by various means, including the Renesas Technology Corporation Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corporation assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corporation semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corporation or an authorized Renesas Technology Corporation product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corporation is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corporation for further details on these materials or the products contained therein. http://www.renesas.com Copyright (c) 2003. Renesas Technology Corporation, All rights reserved. Printed in Japan. Colophon 0.0 Rev.1.00, Jun.05.2003, page 8 of 8