To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry. Notice 1. 2. 3. 4. 5. 6. 7. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas Electronics product depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as "Specific" or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is "Standard" unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support. "Specific": Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. "Standard": 8. 9. 10. 11. 12. (Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries. (Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. DATA SHEET BIPOLAR ANALOG INTEGRATED CIRCUIT PC29xxB Series THREE-TERMINAL LOW DROPOUT VOLTAGE REGULATOR (OUTPUT CURRENT: 1.0 A) DESCRIPTION The PC29xxB series is a series of three-terminal low dropout voltage regulators with 1.0 A output current. This series is suitable for low voltage operated IC and has 4 output voltage types, 1.8 V, 2.5 V, 3.3 V and 5.0 V. Compared with the PC29xx and PC29xxA series, this series has improved output voltage tolerance (VO 2%), quiescent current (1.8 mA TYP. (IO = 0 A)), and short-circuit current. FEATURES * Output current capacity: 1.0 A * Output voltage tolerance: VO 2% (TA = 25C) * Low quiescent current: 1.8 mA TYP. (IO = 0 A) * Low short-circuit current: 0.3 A TYP. ( PC2918B), 0.6 A TYP. ( PC2925B, PC2933B), 0.65 A TYP. ( PC2905B) * Low dropout voltage: VDIF = 0.6 V MAX. (IO = 0.5 A) * On-chip inrush current protection circuit at the time of input voltage rising (when input voltage is low) * On-chip over-current limiter * On-chip thermal shut down circuit APPLICATIONS Digital TV, DVD, LCD Monitors, Printers, Audio, Air Conditioners, and other applications. PIN CONFIGURATIONS (Marking Side) Isolated TO-220 (MP-45G) SC-64 (MP-3) 4 1 1 2 3 1: INPUT 2: GND 3: OUTPUT 2 TO-252 (MP-3ZK) SC-63 (MP-3Z) 4 3 1 2 1: INPUT Note1 2: GND 3: OUTPUT 4: GND (Fin) 4 3 1 1: INPUT 2: GND Note2 3: OUTPUT 4: GND (Fin) 2 3 1: INPUT 2: GND Note2 3: OUTPUT 4: GND (Fin) Notes 1. No.2 pin and No.4 fin are common GND. 2. No.2 pin is cut. No.2 pin and No.4 fin are common GND. The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. Document No. G17567EJ4V0DS00 (4th edition) Date Published August 2007 NS Printed in Japan 2005, 2007 The mark <R> shows major revised points. The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field. PC29xxB Series BLOCK DIAGRAM OUTPUT Saturation protection - Overcurrent protection Error Amp. Drive circuit Reference voltage + Thermal shut down Startup circuit INPUT GND <R> ORDERING INFORMATION Part Number Package Output Voltage Marking PC2918BHF Isolated TO-220 (MP-45G) 1.8 V 2918B PC2918BHB SC-64 (MP-3) 1.8 V 2918B PC2918BT SC-63 (MP-3Z) 1.8 V 2918B PC2918BT1D TO-252 (MP-3ZK) 1.8 V 2918BD PC2925BHF Isolated TO-220 (MP-45G) 2.5 V 2925B PC2925BHB SC-64 (MP-3) 2.5 V 2925B PC2925BT SC-63 (MP-3Z) 2.5 V 2925B PC2925BT1D TO-252 (MP-3ZK) 2.5 V 2925BD PC2933BHF Isolated TO-220 (MP-45G) 3.3 V 2933B PC2933BHB SC-64 (MP-3) 3.3 V 2933B PC2933BT SC-63 (MP-3Z) 3.3 V 2933B PC2933BT1D TO-252 (MP-3ZK) 3.3 V 2933BD PC2905BHF Isolated TO-220 (MP-45G) 5.0 V 2905B PC2905BHB SC-64 (MP-3) 5.0 V 2905B PC2905BT SC-63 (MP-3Z) 5.0 V 2905B PC2905BT1D TO-252 (MP-3ZK) 5.0 V 2905BD Remark Tape-packaged products have the symbol -E1, or -E2 suffixed to the part number. In Pb-free products, any of -AT, -AZ or -AY is added to the end of their part number. Refer to the following table for details. 2 Data Sheet G17567EJ4V0DS PC29xxB Series Part Number Note1 PC29xxBHF PC29xxBHF-AZ Note2 PC29xxBHB Package Package Type Isolated TO-220 (MP-45G) * Packed in envelop Isolated TO-220 (MP-45G) * Packed in envelop SC-64 (MP-3) * Packed in envelop PC29xxBHB-AZ Note2 SC-64 (MP-3) * Packed in envelop PC29xxBHB-AY Note3 SC-64 (MP-3) * Packed in envelop SC-63 (MP-3Z) * Packed in envelop SC-63 (MP-3Z) * Packed in envelop SC-63 (MP-3Z) * 16 mm wide embossed taping PC29xxBT PC29xxBT-AZ Note2 PC29xxBT-E1 * Pin 1 on draw-out side * 2000 pcs/reel PC29xxBT-E1-AZ Note2 SC-63 (MP-3Z) * 16 mm wide embossed taping * Pin 1 on draw-out side * 2000 pcs/reel PC29xxBT-E1-AY Note3 SC-63 (MP-3Z) * 16 mm wide embossed taping * Pin 1 on draw-out side * 2000 pcs/reel PC29xxBT-E2 SC-63 (MP-3Z) * 16 mm wide embossed taping * Pin 1 at take-up side * 2000 pcs/reel PC29xxBT-E2-AZ Note2 SC-63 (MP-3Z) * 16 mm wide embossed taping * Pin 1 at take-up side * 2000 pcs/reel PC29xxBT-E2-AY Note3 SC-63 (MP-3Z) * 16 mm wide embossed taping * Pin 1 at take-up side * 2000 pcs/reel PC29xxBT1D-E1 TO-252 (MP-3ZK) * 16 mm wide embossed taping * Pin 1 on draw-out side * 2500 pcs/reel PC29xxBT1D-E1-AT Note4 TO-252 (MP-3ZK) * 16 mm wide embossed taping * Pin 1 on draw-out side * 2500 pcs/reel PC29xxBT1D-E2 TO-252 (MP-3ZK) * 16 mm wide embossed taping * Pin 1 at take-up side * 2500 pcs/reel PC29xxBT1D-E2-AT Note4 TO-252 (MP-3ZK) * 16 mm wide embossed taping * Pin 1 at take-up side * 2500 pcs/reel Notes 1. xx stands for symbols that indicate the output voltage. 2. Pb-free (This product does not contain Pb in the external electrode.) 3. Pb-free (This product does not contain Pb in the external electrode, Sn100% plating.) 4. Pb-free (This product does not contain Pb in the external electrode and other parts.) Data Sheet G17567EJ4V0DS 3 PC29xxB Series ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified) Parameter Symbol Rating PC29xxBHF Unit PC29xxBHB, PC29xxBT, PC29xxBT1D Input Voltage -0.3 to +16.0 VIN Internal Power Dissipation (TC = 25C) Note 15 PT V 10 W Operating Ambient Temperature TA -40 to +85 C Operating Junction Temperature TJ -40 to +150 C Storage Temperature Tstg -55 to +150 C Thermal Resistance (junction to case) Rth(J-C) 7 12.5 C/W Thermal Resistance (junction to ambient) Rth(J-A) 65 125 C/W Note Internally limited. When the operating junction temperature rises above 150C, the internal circuit shuts down the output voltage. Caution Product quality may suffer if the absolute maximum rating is exceeded even momentarily for any parameter. That is, the absolute maximum ratings are rated values at which the product is on the verge of suffering physical damage, and therefore the product must be used under conditions that ensure that the absolute maximum ratings are not exceeded. TYPICAL CONNECTION D1 PC29xxB INPUT OUTPUT + CIN COUT D2 CIN : 0.1 F or higher. Be sure to connect CIN to prevent parasitic oscillation. Set this value according to the length of the line between the regulator and the INPUT pin. Use of a film capacitor or other capacitor with first-rate voltage and temperature characteristics is recommended. If using a laminated ceramic capacitor, it is necessary to ensure that CIN is 0.1 F or higher for the voltage and temperature range to be used. COUT: 10 F or higher. Be sure to connect COUT to prevent oscillation and improve excessive load regulation. Place CIN and COUT as close as possible to the IC pins (within 1 to 2 cm). Also, use an electrolytic capacitor with low impedance characteristics if considering use at sub-zero temperatures. D1 : If the OUTPUT pin has a higher voltage than the INPUT pin, connect a diode. D2 : If the OUTPUT pin has a lower voltage than the GND pin, connect a Schottky barrier diode. Caution Make sure that no voltage is applied to the OUTPUT pin from external. 4 Data Sheet G17567EJ4V0DS PC29xxB Series RECOMMENDED OPERATING CONDITIONS Parameter Input Voltage Output Current Symbol Type Number VIN MIN. TYP. MAX. Unit PC2918B 2.8 12.0 V PC2925B 3.5 12.0 V PC2933B 4.3 12.0 V PC2905B 6.0 12.0 V IO All 0 1.0 A Operating Ambient Temperature TA All - 40 + 85 C Operating Junction Temperature TJ All - 40 + 125 C Caution Use of conditions exceeding the above-listed recommended operating conditions is not a problem as long as the absolute maximum ratings are not exceeded. However, since the use of such conditions diminishes the margin of safety, careful evaluation is required before such conditions are used. ELECTRICAL CHARACTERISTICS PC2918B (TJ = 25C, VIN = 2.8 V, IO = 0.5 A, CIN = 0.1 F, COUT = 10 F, unless otherwise specified) Parameter Output Voltage Symbol Conditions VO1 VO2 2.8 V VIN 12 V, 0 A IO 1 A MIN. TYP. MAX. Unit 1.764 1.8 1.836 V (1.746) - (1.854) V Line Regulation REGIN 2.8 V VIN 12 V - 4.0 25.0 mV Load Regulation REGL 0 A IO 1 A - 3.5 30.0 mV Quiescent Current IBIAS IO = 0 A - 1.8 4.0 mA IO = 0.5 A - 18.0 (30.0) mA Startup Quiescent Current IBIAS(S) VIN = 1.7 V, IO = 0 A - 1.0 30.0 mA VIN = 2.4 V, IO = 1 A - - (80.0) mA Quiescent Current Change IBIAS 2.8 V VIN 12 V - (3.0) (15.0) mA Output Noise Voltage Vn 10 Hz f 100 kHz - 50.0 - Vr.m.s. Ripple Rejection R*R f = 120 Hz, 2.8 V VIN 3.8 V, IO = 0.3 A - 62 - dB Dropout Voltage VDIF IO = 0.5 A - 0.3 0.6 V IO = 1 A - (0.7) - V (0.1) 0.3 (0.8) A Short Circuit Current IOshort VIN = 2.8 V VIN = 12 V - (0.4) - A Peak Output Current IOpeak VIN = 2.8 V 1.0 1.3 (1.6) A VIN = 12 V - (1.1) - A - 0.1 - mV/C Temperature Coefficient of Output Voltage VO/T 0C TJ 125C, IO = 5 mA Remark Values in parentheses are product design values, and are thus provided as reference values. Data Sheet G17567EJ4V0DS 5 PC29xxB Series PC2925B (TJ = 25C, VIN = 3.5 V, IO = 0.5 A, CIN = 0.1 F, COUT = 10 F, unless otherwise specified) Parameter Symbol Conditions MIN. TYP. MAX. Unit 2.45 2.5 2.55 V (2.425) - (2.575) V - 5.5 25.0 mV 0 A IO 1 A - 3.5 40.0 mV IO = 0 A - 1.8 4.0 mA IO = 0.5 A - 18.0 (30.0) mA - 11.0 30.0 mA Output Voltage VO1 VO2 3.5 V VIN 12 V, 0 A IO 1 A Line Regulation REGIN 3.5 V VIN 12 V Load Regulation REGL Quiescent Current IBIAS Startup Quiescent Current IBIAS(S) VIN = 2.4 V, IO = 0 A VIN = 3.1 V, IO = 1 A - - (80.0) mA Quiescent Current Change IBIAS 3.5 V VIN 12 V - (3.0) (15.0) mA Output Noise Voltage Vn 10 Hz f 100 kHz - 62.0 - Vr.m.s. Ripple Rejection R*R f = 120 Hz, 3.5 V VIN 4.5 V, IO = 0.3 A - 60 - dB Dropout Voltage VDIF IO = 0.5 A - 0.36 0.6 V IO = 1 A - (0.7) - V A Short Circuit Current IOshort Peak Output Current IOpeak Temperature Coefficient of Output Voltage VO/T VIN = 3.5 V (0.1) 0.6 (0.8) VIN = 12 V - (0.4) - A VIN = 3.5 V 1.0 1.3 (1.6) A VIN = 12 V - (1.1) - A - 0.2 - mV/C 0C TJ 125C, IO = 5 mA Remark Values in parentheses are product design values, and are thus provided as reference values. PC2933B (TJ = 25C, VIN = 5.0 V, IO = 0.5 A, CIN = 0.1 F, COUT = 10 F, unless otherwise specified) Parameter Output Voltage Symbol Conditions VO1 TYP. MAX. Unit V 3.234 3.3 3.366 (3.201) - (3.399) V 4.3 V VIN 12 V - 6.0 25.0 mV REGL 0 A IO 1 A - 4.2 50.0 mV IBIAS IO = 0 A - 1.8 4.0 mA IO = 0.5 A - 18.0 (30.0) mA VIN = 3.1 V, IO = 0 A - 11.0 30.0 mA VIN = 3.7 V, IO = 1 A - - (80.0) mA VO2 4.3 V VIN 12 V, 0 A IO 1 A Line Regulation REGIN Load Regulation Quiescent Current Startup Quiescent Current MIN. IBIAS(S) Quiescent Current Change IBIAS 4.3 V VIN 12 V - (3.0) (15.0) mA Output Noise Voltage Vn 10 Hz f 100 kHz - 82.0 - Vr.m.s. Ripple Rejection R*R f = 120 Hz, 4.3 V VIN 5.3 V, IO = 0.3 A - 58 - dB Dropout Voltage VDIF IO = 0.5 A - 0.36 0.6 V IO = 1 A - (0.7) - V (0.1) 0.6 (0.8) A Short Circuit Current IOshort VIN = 5.0 V VIN = 12 V - (0.4) - A Peak Output Current IOpeak VIN = 5.0 V 1.0 1.5 (1.6) A VIN = 12 V - (1.1) - A - 0.4 - mV/C Temperature Coefficient of Output Voltage VO/T 0C TJ 125C, IO = 5 mA Remark Values in parentheses are product design values, and are thus provided as reference values. 6 Data Sheet G17567EJ4V0DS PC29xxB Series PC2905B (TJ = 25C, VIN = 6.0 V, IO = 0.5 A, CIN = 0.1 F, COUT = 10 F, unless otherwise specified) Parameter Symbol Conditions MIN. TYP. MAX. Unit 4.90 5.0 5.10 V (4.85) - (5.15) V - 6.5 25.0 mV 0 A IO 1 A - 5.0 80.0 mV IO = 0 A - 1.8 4.0 mA IO = 0.5 A - 18.0 (30.0) mA - 11.0 30.0 mA Output Voltage VO1 VO2 6.0 V VIN 12 V, 0 A IO 1 A Line Regulation REGIN 6.0 V VIN 12 V Load Regulation REGL Quiescent Current IBIAS Startup Quiescent Current IBIAS(S) VIN = 4.8 V, IO = 0 A VIN = 5.5 V, IO = 1 A - - (80.0) mA Quiescent Current Change IBIAS 6.0 V VIN 12 V - (3.0) (15.0) mA Output Noise Voltage Vn 10 Hz f 100 kHz - 122.0 - Vr.m.s. Ripple Rejection R*R f = 120 Hz, 6.0 V VIN 7 V, IO = 0.3 A - 57 - dB Dropout Voltage VDIF IO = 0.5 A - 0.38 0.6 V IO = 1 A - (0.7) - V A Short Circuit Current IOshort Peak Output Current IOpeak Temperature Coefficient of Output Voltage VO/T VIN = 6.5 V (0.1) 0.65 (0.8) VIN = 12 V - (0.4) - A VIN = 6.5 V 1.0 1.5 (1.6) A VIN = 12 V - (1.1) - A - 0.6 - mV/C 0C TJ 125C, IO = 5 mA Remark Values in parentheses are product design values, and are thus provided as reference values. Data Sheet G17567EJ4V0DS 7 PC29xxB Series TYPICAL CHARACTERISTICS (TA = 25C) VO vs.TJ Pd vs. TA Solid line: m PC29xxBHF Broken line: m PC29xxBT1D, m PC29xxBT, m PC29xxBHB W ith in fin ite he at sin k 15 10 VO - Output Voltage Change - mV Pd - Total Power Dissipation - W 20 100 5 Without he atsink 1.92 1.0 0 IO = 5 mA 80 60 40 20 0 -20 PC2918B (VIN = 2.8 V) PC2925B (VIN = 3.5 V) PC2933B (VIN = 5.0 V) PC2905B (VIN = 6.0 V) -40 -60 -80 -100 50 0 85 100 150 -50 -25 0 25 50 75 TJ - Operating Junction Temperature - C TA - Operating Ambient Temperature - C VO vs. VIN ( PC2918B) VO vs. VIN ( PC2925B) 2.5 3 TJ = 25C 2.5 2 VO - Output Voltage - V VO - Output Voltage - V TJ = 25C 1.5 IO = 5 mA IO = 0.5 A IO = 1 A 1 0.5 1.5 1 0.5 0 0 2 4 6 8 0 2 4 6 VIN - Input Voltage - V VIN - Input Voltage - V VO vs. VIN ( PC2933B) VO vs. VIN ( PC2905B) 8 6 4 TJ = 25C 3.5 TJ = 25C 5 VO - Output Voltage - V VO - Output Voltage - V IO = 5 mA IO = 0.5 A IO = 1 A 2 0 3 IO = 5 mA IO = 0.5 A IO = 1 A 2.5 2 1.5 1 0.5 4 IO = 5 mA IO = 0.5 A IO = 1 A 3 2 1 0 0 0 2 4 6 8 0 2 4 6 VIN - Input Voltage - V VIN - Input Voltage - V 8 100 125 Data Sheet G17567EJ4V0DS 8 PC29xxB Series IBIAS (IBIAS(s)) vs. VIN ( PC2925B) 80 80 70 70 IBIAS - Quiescent Current - mA IBIAS - Quiescent Current - mA IBIAS (IBIAS(s)) vs. VIN ( PC2918B) 60 50 40 IO = 1 A 30 20 IO = 0.5 A 10 IO = 5 mA 60 50 40 IO = 1 A 30 20 IO = 0.5 A 10 IO = 5 mA 0 0 0 2 4 6 8 10 12 14 0 16 2 4 80 80 70 70 60 50 IO = 1 A 30 IO = 0.5 A IO = 5 mA 10 12 14 16 60 50 IO = 1 A 40 30 IO = 0.5 A 20 IO = 5 mA 10 0 0 0 2 4 6 8 10 12 14 16 0 2 4 6 8 10 12 VIN - Input Voltage - V VIN - Input Voltage - V VDIF vs. TJ IOpeak vs. VDIF 1 14 16 2 IOpeak - Peak Output Current - A IO = 0.5 A 0.9 VDIF - Dropout Voltage - V 10 IBIAS (IBIAS(s)) vs. VIN ( PC2905B) IBIAS - Quiescent Current - mA IBIAS - Quiescent Current - mA IBIAS (IBIAS(s)) vs. VIN ( PC2933B) 20 8 VIN - Input Voltage - V VIN - Input Voltage - V 40 6 0.8 PC2933B 0.7 0.6 PC2905B 0.5 0.4 0.3 PC2925B 0.2 PC2918B 0.1 PC2925B PC2905B 1.5 1 PC2933B PC2918B 0.5 TJ = 25C 0 0 -50 -25 0 25 50 75 100 125 150 TJ - Operating Junction Temperature - C Data Sheet G17567EJ4V0DS 0 3 6 9 12 15 VDIF - Dropout Voltage - V 9 PC29xxB Series R*R vs. f ( PC2918B) 70 R*R - Ripple Rejection - dB 80 IO = 5 mA 60 IO = 0.3 A IO = 0.5 A 50 IO = 1 A 40 30 20 TJ = 25C VIN = 2.8 V 10 R*R - Ripple Rejection - dB 80 R*R vs. f ( PC2925B) 0 100 1000 10000 50 30 20 10 1000 10000 100000 80 IO = 5 mA IO = 1 A 30 20 TJ = 25C VIN = 5.0 V R*R - Ripple Rejection - dB IO = 0.5 A 10 IO = 5 mA 70 IO = 0.3 A 0 IO = 0.3 A 60 50 40 IO = 0.5 A IO = 1 A 30 20 TJ = 25C VIN = 6.0 V 10 0 10 100 1000 10000 100000 10 100 1000 10000 100000 f - Frequency - Hz f - Frequency - Hz VO vs. IO ( PC2918B) VDIF vs. IO 1 3.0 TJ = 25C 0.9 VIN = 2.8 V 2.5 PC2933B VO - Output Voltage - V VDIF - Dropout Voltage - V 100 R*R vs. f ( PC2905B) 40 PC2925B PC2905B 0.4 0.3 0.2 TJ = 25C VIN = 3.5 V 10 R*R vs. f ( PC2933B) 50 0.5 IO = 1 A f - Frequency - Hz 60 0.6 IO = 0.5 A 40 f - Frequency - Hz 70 R*R - Ripple Rejection - dB 60 100000 80 0.7 IO = 0.3 A 0 10 0.8 IO = 5 mA 70 PC2918B 2.0 1.5 1.0 0.5 0.1 0 10 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 IO - Output Current - A IO - Output Current - A Data Sheet G17567EJ4V0DS PC29xxB Series VO vs. IO ( PC2925B) VO vs. IO ( PC2933B) 3.0 5.0 VIN = 3.5 V VIN = 5.0 V 4.0 VO - Output Voltage - V VO - Output Voltage - V 2.5 2.0 1.5 1.0 0.5 0 3.0 2.0 1.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 IO - Output Current - A 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 IO - Output Current - A VO vs. IO ( PC2905B) 6.0 VIN = 6.5 V VO - Output Voltage - V 5.0 4.0 3.0 2.0 1.0 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 IO - Output Current - A Data Sheet G17567EJ4V0DS 11 PC29xxB Series PACKAGE DRAWINGS (Unit: mm) PC2918BHF, PC2925BHF, PC2933BHF, PC2905BHF 3PIN PLASTIC SIP (MP-45G) A N E P B I L M D 1 2 3 K Y V J H U Z C F G M NOTE ITEM Each lead centerline is located within 0.25 mm of its true position (T.P.) at maximum material condition. MILLIMETERS A 10.00.2 B 7.00.2 C 1.500.2 D E 17.00.3 3.30.2 F 0.750.10 G 0.25 H 2.54 (T.P.) I 5.00.3 J K 2.460.2 5.00.2 L 8.50.2 M 8.50.2 N 4.50.2 P U V 2.80.2 2.40.5 0.650.10 Y Z 8.90.7 1.300.2 P3HF-254B-4 12 Data Sheet G17567EJ4V0DS PC29xxB Series PC2918BHB, PC2925BHB, PC2933BHB, PC2905BHB SC-64 (MP-3) 2.30.2 1.5 +0.2 -0.1 6.50.2 5.00.2 0.50.1 2 3 7.0 MIN. 1 13.7 MIN. 1.60.2 5.50.2 4 1.10.1 0.5 +0.2 -0.1 2.3 0.75 2.3 0.5 +0.2 -0.1 PC2918BT, PC2925BT, PC2933BT, PC2905BT SC-63 (MP-3Z) (Unit: mm) 6.50.2 2.30.2 4.40.2 1.5 -0.1 +0.2 5.00.2 Note 0.50.1 2 3 2.50.5 1.00.5 0.4 MIN. 0.5 TYP. 1 9.50.5 4 5.60.3 Note 5.50.2 <R> 0.50.1 0.50.1 2.30.3 2.30.3 0.150.15 Note The depth of notch at the top of the fin is from 0 to 0.2 mm. Data Sheet G17567EJ4V0DS 13 PC29xxB Series PC2918BT1D, PC2925BT1D, PC2933BT1D, PC2905BT1D TO-252 (MP-3ZK) 1.0 TYP. 6.50.2 5.1 TYP. 4.3 MIN. 2.30.1 0.50.1 1.14 MAX. 3 0.51 MIN. 2 0.8 1 6.10.2 10.4 MAX. (9.8 TYP.) 4.0 MIN. 4 0 to 0.25 0.50.1 0.760.12 2.3 2.3 1.0 14 Data Sheet G17567EJ4V0DS PC29xxB Series <R> RECOMMENDED MOUNTING CONDITIONS The PC29xxB Series should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact an NEC Electronics sales representative. For technical information, see the following website. Semiconductor Device Mount Manual (http://www.necel.com/pkg/en/mount/index.html) Surface Mount Device PC29xxBT Series: SC-63 (MP-3Z) PC29xxBT1D Series: TO-252 (MP-3ZK) Process Infrared Ray Reflow Conditions Peak temperature: 260C or below (Package surface temperature), Symbol IR60-00-3 Reflow time: 60 seconds or less (at 220C or higher), Maximum number of reflow processes: 3 times or less. Vapor Phase Soldering Peak temperature: 215C or below (Package surface temperature), VP15-00-3 Reflow time: 40 seconds or less (at 200C or higher), Maximum number of reflow processes: 3 times or less. Partial Heating Method Pin temperature: 350C or below, P350 Heat time: 3 seconds or less (Per each side of the device). Note1 PC29xxBT-AZ Series , PC29xxBT-AY Series Note3 PC29xxBT1D-AT Series : TO-252 (MP-3ZK) Note2 Process Infrared Ray Reflow : SC-63 (MP-3Z) Conditions Peak temperature: 260C or below (package surface temperature), Symbol IR60-00-3 Reflow time: 60 seconds or less (at 220C or higher), Maximum number of reflows processes: 3 times or less. Partial Heating Method Pin temperature: 350C or below, P350 Heat time: 3 seconds or less (per each side of the device). Notes 1. Pb-free (This product does not contain Pb in the external electrode.) 2. Pb-free (This product does not contain Pb in the external electrode, Sn100% plating.) 3. Pb-free (This product does not contain Pb in the external electrode and other parts.) Caution Apply only one kind of soldering condition to a device, except for "partial heating method", or the device will be damaged by heat stress. Remark Flux: Rosin-based flux with low chlorine content (chlorine 0.2 Wt% or below) is recommended. Data Sheet G17567EJ4V0DS 15 PC29xxB Series Type of Through-hole Device Note1 PC29xxBHF Series, PC29xxBHF-AZ Series : Isolated TO-220 (MP-45G) Note1 Note2 PC29xxBHB Series, PC29xxBHB-AZ Series , PC29xxBHB-AY Series : SC-64 (MP-3) Process Wave Soldering Conditions Symbol Solder temperature: 260C or below, Flow time: 10 seconds or less WS60-00-1 (only to leads) Partial Heating Method Pin temperature: 350C or below, Heat time: 3 seconds or less (per each pin). P350 Notes 1. Pb-free (This product does not contain Pb in the external electrode.) 2. Pb-free (This product does not contain Pb in the external electrode, Sn100% plating.) Caution For through-hole device, the wave soldering process must be applied only to leads, and make sure that the package body does not get jet soldered. REFERENCE DOCUMENTS <R> USER'S MANUAL USAGE OF THREE TERMINAL REGULATORS Document No.G12702E REVIEW OF QUALITY AND RELIABILITY HANDBOOK Document No.C12769E INFORMATION VOLTAGE REGULATOR OF SMD Document No.G11872E SEMICONDUCTOR DEVICE MOUNT MANUAL http://www.necel.com/pkg/en/mount/index.html 16 Data Sheet G17567EJ4V0DS PC29xxB Series * The information in this document is current as of August, 2007. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. * NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. * NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). M8E 02. 11-1