VADS-15524 - V-Infinity - Datasheet.Directory



•

V-Infinity, LLC, 9615 SW Allen Blvd Suite 103, Beaverton, OR 97005 www.v-infinity.com 1-866-372-1258

VADS-15524 Single/Double Output with Battery Charger

CH1 CH2

DC output voltage 24V 5V

Output V. tolerance ±1% ±3%

Output rated current 5.8A 3A

Output current range 0-6.5A 0-3A

Ripple & noise 150mVp-p 100mVp-p

Line regulation ±0.5% ±0.5%

Load regulation ±0.5% ±2.0%

DC output power 154.2W

Efficiency 82%

DC voltage adj. ±10% fixed

Input voltage range 88~264VAC 47~63Hz; 124~370VDC

AC current 2.5A/115V 1.5A/230V

Inrush current cold start 20A/115V 40A/230V

Leakage current <1mA/240VAC

Overload protection 105%~135%

type: constant current limiting, auto recovery

Over voltage protection CH1: 105%~135% type: shutdown

Temperature coefficient ±0.03% / ºC (0~50ºC)

Set up, rise, hold up time 2s, 90ms, 16ms/115VAC 1s, 90ms, 20ms / 230VAC

Power factor PF>0.92

Vibration 10~500Hz, 2G 10 min./1 cycle, period of 60 min. each axes

Withstand voltage I/P-O/P: 3KVAC, I/P-FG: 1.5KVAC, O/P-FG: 0.5KVAC, for 1 min.

Isolation resistance I/P-O/P, I/P-FG, O/P-FG:500VDC / 100M Ohms min.

Working temp., humidity -10°C~+60% (refer to output derating curve), 20%-90% RH

Storage temp., humidity -20°C~+85°C, 10%-95% RH

Dimensions 7.83x4.33x1.97inches (198.88x109.98x50.04 mm) Case: 906

Weight 2.20 lb. (0.10 Kgs)

Safety standards UL1950, TUV EN60950 approved

EMC standards CISPR22(EN55022)CLASS B,EN61000-4-2,3,4,5,6,8,11;ENV50204,EN61000-3-2,-3

Notes: 1. All parameters are specified at 230VAC input, rated load, 25°C 70% RH ambient

2. Tolerance includes set up tolerance, line regulation, load regulation

3. Ripple & noise are measured at 20MHz by using a 12” twisted pair terminated with a 0.1uF & 47 uF capacitor

4. Line regulation is measured from low line to high line at rated load

5. Load regulation is measured from 20% to 100% rated load, and other output at 60% rated load

6. Each output provides up to maximum current, but total load can not exceed maximum output power

*V-Infinity reserves the right to make changes to its products or to discontinue any product or service without notice, and to advise cus-

tomers to verify the most up-to-date product information before placing orders. V-Infinity assumes no liability or responsibility for cus-

tomer’s applications using V-Infinity products other than repair or replacing (at V-I’s option) V-Infinity products not meeting V-I’s pub-

lished specifications. Nothing will be covered outside of standard product warranty.

Features

·Low cost

·High reliability

·105°C output capacitor

·Universal AC input range

·High efficiency, low temperature rise

·Soft-start circuit, limiting AC surge current

·Short circuit, overload, battery protected

·Compact size, light weight

·100% full load burn-in test

·Built in EMI filter, low ripple noise

·Battery low / Battery polarity protections