LITE-ON SEMICONDUCTOR Sidac High Voltage Sillicon Bidirectional Thyristors SD1A-F SERIES SIDACS 1 AMPERES RMS 120 thru 240 VOLTS DO-201AD FEATURES High Pressure Sodium Vapor Lighting Strobes and Flashers Ignitors High Voltage Regulators Pulse Generators Used to Trigger Gates of SCR's and Triacs A A B C D DO-201AD MECHANICAL DATA Case: JEDEC DO-201AD molded plastic Terminals: Lead Free Plating (Matte Tin Finish) Component in accordance to RoHs 2002/95/EC Weight : 0.04 ounces, 1.1 grams Min. B 25.4 7.30 Max. 9.50 C 1.20 1.30 Dim. A 4.80 5.30 D All Dimensions in millimeter MAXIMUM RATINGS (Tj= 25 unless otherwise noticed) Rating Symbol Value Unit VDRM, VRRM 90 180 Volts IT(RMS) 1 Amp ITSM 20 Amps TJ -40 to +125 Tstg -40 to +150 Peak Repetitive Off- State Voltage (TJ= -40 to 125, Sine Wave, 50 to 60 Hz) SD1A120F SD1A220F, SD1A240F On-State RMS Current (TL = 80, Lead Lengh=3/8" , All Conduction Angles) Peak Non-Repetitive Surge Current 60 Hz One Cycle Sine Wave (Tj = 125) Operating Junction Temperature Range Storage Temperature Range Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 2 REV. 4, Apr-2007, KDXF01 RATING AND CHARACTERISTIC CURVES SD1A-F SERIES THERMAL CHARACTERISTICS Characteristic Thermal Resistance - Junction to Lead Lead Length = 3/8 " Maximum Lead Solder Temperature (Lead Length 1/16 " from Case, 10s Max) Symbol Value Unit RthJL 15 /W TL 260 ELECTRICAL CHARACTERISTICS (Tj=25 unless otherwise noted) Characteristics Symbol Min Typ Max Unit IDRM ---- ---- 10 uA VTM ---- 1.1 1.5 Volts VBO 110 210 220 ------- 130 230 250 Volts IBO ---- ---- 200 uA Dynamic Holding Current (Sine Wave, 50 to 60 Hz, RL=100 Ohm) IH ---- ---- 100 mA Switching Resistance (Sine Wave, 50 to 60 Hz) Rs 0.1 ---- ---- k OFF CHARACTERISTICS Peak Reptitive Forward or Reverse Blocking Current (50 to 60 Hz Sine Wave) VDRM=90V VDRM=180V SD3A120 SD3A220, SD3A240 ON CHARACTERISTICS Peak On-State Voltage (ITM=1A Peak @Tp 300 us, Duty Cycle 2%) Breakover Voltage, IBO = 35 uA Breakover Current SD1A120F SD1A220F SD1A240F DYNAMIC CHARACTERISTICS Critical Rate of Rise of On-State Current, Critical Damped Waveform Circuit (IPK = 130 A, Pulse Width = 10 us) di/dt ---- 120 ---- A/us RATING AND CHARACTERISTIC CURVES SD1A-F SERIES RATING AND CHARACTERISTIC CURVES SD1A-F SERIES Specifications mentioned in this publication are subject to change without notice.