SD1A-F SERIES
MAXIMUM RATINGS
(Tj= 25 unless otherwise noticed)
℃
FEATURES
High Pressure Sodium Vapor Lighting
Strobes and Flashers
Ignitors
High Voltage Regulators
Pulse Generators
Used to Trigger Gates of SCR's and Triacs
MECHANICAL DATA
Case: JEDEC DO-201AD molded plastic
Terminals: Lead Free Plating (Matte Tin Finish)
Component in accordance to RoHs 2002/95/EC
Weight : 0.04 ounces, 1.1 grams
Sidac High Voltage
Sillicon Bidirectional Thyristors
SIDACS
1 AMPERES RMS
120 thru 240 VOLTS
SEMICONDUCTOR
LITE-ON
Rating Symbol Value Unit
Peak Repetitive Off– State Voltage
(
T
J
= -40 to 125
℃
, Sine Wave, 50 to 60 Hz)
V
DRM
,
V
RRM
± 90
± 180 Volts
On-State RMS Current
(
T
L
= 80
,
℃
Lead Lengh=3/8” , All Conduction Angles) I
T(RMS)
± 1 Amp
Peak Non-Repetitive Surge Current
60 Hz One Cycle Sine Wave (Tj = 125
℃
)I
TSM
± 20 Amps
Operating Junction Temperature Range
T
J
-40 to +125
℃
Storage Temperature Range Tstg -40 to +150
℃
2
REV. 4, Apr-2007, KDXF01
Maximum ratings are those values beyond which device damage can occur.
Maximum ratings applied to the device are individual stress limit values (not normal operating
conditions) and are not valid simultaneously. If these limits are exceeded, device functional
operation is not implied, damage may occur and reliability may be affected.
SD1A120F
SD1A220F, SD1A240F
DO-201AD
All Dimensions in millimeter
Max.
Min.
DO-201AD
Dim.
A
D
C
B
25.4
9.50
-
7.30
1.20
4.80 5.30
1.30
A
C
D
A
B
RATING AND CHARACTERISTIC CURVES
SD1A-F SERIES
Characteristic Symbol Value Unit
Thermal Resistance - Junction to Lead
Lead Length = 3/8 ” R
thJL
15
/
℃
W
Maximum Lead Solder Temperature
(Lead Length 1/16 ” from Case, 10s Max)
≧
T
L
260
℃
Characteristics Symbol Min Typ Max Unit
Peak Reptitive Forward or Reverse Blocking Current
(50 to 60 Hz Sine Wave)
V
DRM
=90V
V
DRM
=180V
I
DRM
---- ----
10 uA
Peak On-State Voltage
(I
TM=
1A Peak @Tp 300 us, Duty Cycle 2%)
≦ ≦
V
TM
---- 1.1 1.5 Volts
Breakover Voltage, IBO = 35 uA
V
BO
110
210
220
---
---
---
130
230
250
Volts
Breakover Current I
BO
---- ---- 200 uA
Dynamic Holding Current
(Sine Wave, 50 to 60 Hz, R
L
=100 Ohm) I
H
---- ---- 100 mA
Switching Resistance
(Sine Wave, 50 to 60 Hz) Rs 0.1 ---- ---- kΩ
Critical Rate of Rise of On-State Current,
Critical Damped Waveform Circuit
(I
PK
= 130 A, Pulse Width = 10 us)
di/dt ---- 120 ---- A/us
THERMAL CHARACTERISTICS
ELECTRICAL CHARACTERISTICS
(T
j
=25 unless otherwise noted)
℃
OFF CHARACTERISTICS
ON CHARACTERISTICS
DYNAMIC CHARACTERISTICS
SD1A120F
SD1A220F
SD1A240F
SD3A120
SD3A220, SD3A240
RATING AND CHARACTERISTIC CURVES
SD1A-F SERIES
RATING AND CHARACTERISTIC CURVES
SD1A-F SERIES
Specifications mentioned in this publication are subject to change without notice.
◎
