Dimensions are shown in mm (inch)
Dimensions subject to change 137
D Subminiature Military/High Reliability
Straight PC Tail
Part Numbers
Military Part Numbers
XYXY
0,76 (.030) 1,02 (.040)
Shell XXXXXX
Size Layout 3,23 (.127) 4,01 (.158) 4,65 (.183) 3,23 (.127) 4,01 (.158) 4,65 (.183)
DE 9 DEMM9SE* DEMM9SM* DEMM9SZ* DEMM9SB DEMM9SH DEMM9SX*
DA 15 DAMM15SE* DAMM15SM* DAMM15SZ* DAMM15SB DAMM15SH DAMM15SX*
DB 25 DBMM25SE* DBMM25SM* DBMM25SZ* DBMM25SB DBMM25SH DBMM25SX*
DC 37 DCMM37SE* DCMM37SM* DCMM37SZ* DCMM37SB DCMM37SH DCMM37SX*
DD 50 DDMM50SE* DDMM50SM* DDMM50SZ* DDMM50SB DDMM50SH DDMM50SX*
Note: Spacers (shipped loose) provided only on parts marked *
Commercial Part Numbers
XYXY
0,76 (.030) 1,02 (.040)
Shell XXXXXX
Size Layout 3,23 (.127) 4,01 (.158) 4,65 (.183) 3,23 (.127) 4,01 (.158) 4,65 (.183)
DE 9 DEM9SE DEM9SM DEM9SZ DEM9SB DEM9SH DEM9SX
DA 15 DAM15SE DAM15SM DAM15SZ DAM15SB DAM15SH DAM15SX
DB 25 DBM25SE DBM25SM DBM25SZ DBM25SB DBM25SH DBM25SX
DC 37 DCM37SE DCM37SM DCM37SZ DCM37SB DCM37SH DCM37SX
DD 50 DDM50SE DDM50SM DDM50SZ DDM50SB DDM50SH DDM50SX
Dimensions
ABCDEFWKL
Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,318 (.0125) ±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
A
B
C
10°
ED
Ø 3,05
(.120)
SPACER (SHIPPED LOOSE)
FOR REFERENCE ONLY Ø Y
X ± 0,69 (.027)
6,86
(.270)
2,84
(.112)
5,69
(.224)
L
K
2,84
(.112)
F
W
Receptacle
Engaging Face DD Configuration
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 274.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
