General Purpose High Power PCB Relays Potter & Brumfield Power PCB Relay T9E n n n n n n 1 pole 30A, 1 formA(NO) or 1 formC(CO) High breaking capacity 7500 VA PCB and PCB/quick connect terminals UL class F insulation as standard Ambient temperature up to 105C Plastic materials according to IEC60335-1 Typical applications HVAC, power supplies, domestic appliances, measurement and control. Approvals Coil Data (continued) Technical data of approved types on request. Coil versions, DC coil Coil Rated Operate Release code voltage voltage voltage VDC VDC VDC Code D (1W) coil 6 6 4.5 0.6 9 9 6.75 0.9 12 12 9 1.2 18 18 13.5 1.8 22 22 16.5 2.2 24 24 18 2.4 48 48 36.2 4.8 110 110 82.5 11 Code L (900mW) coil 6 6 4.5 0.6 12 12 9 1.2 18 18 13.5 1.8 24 24 18 2.4 VDE 40027903, UL E58304 Contact Data Contact arrangement 1 form A (NO) 1 form C (CO) Rated voltage 240VAC Max. switching voltage250VAC (VDE); 300VAC (UL) Rated current 30A 20A/10A Limiting continuous current 30A Breaking capacity max. 7500VA 5000/2500VA Contact material AgSnOInO (AgCdO optional) Min. recommended contact load 1A, 5VDC or 12VAC Initial contact resistance 75 m at 1A at 5VDC or 12VAC Frequency of operation, with/without load 6/120min-1 Operate/release time max., including bounce 15/15ms Contact ratings Type Contact IEC 61810 AgSnOInO, 1W coil 1 NO 1 NO 2 NO 1, 2 CO AgSnOInO, 900mW coil 1 NO 1 NO EN 60730-1 AgSnOInO, 1W coil 1 NO UL 508 1) AgSnOInO, 1W coil 1, 2 NO AgSnOInO, 900mW coil 1, 2 NO Load Cycles 30A, 250VAC, cosj=1, 60C 20A, 250VAC, cosj=1, 85C 20A, 250VAC, cosj=1, 70C 20A / 10A, 250VAC, cosj=1, 60C 20x103 100x103 100x103 20x103 17A, 250VAC, cosj=1, 105C 20A, 250VAC, cosj=1, 85C 100x103 100x103 12(12)A, 240VAC, 60C 100x103 30A, 240VAC, general purpose, 25C 100x103 TV-8, 125VAC, 25C Coil resistance 10% Rated coil power W 36 81 144 324 484 576 2304 12100 1 1 1 1 1 1 1 1 40 155 380 660 .9 .9 .9 .9 All figures are given for coil without preenergization, at ambient temperature +23C. Insulation Data Initial dielectric strength between open contacts 1500Vrms between contact and coil 2500Vrms Initial surge withstand voltage between contact and coil6kV (1.2s/50s impulse wave) Initial insulation resistance between insulated elements 1x109 Clearance/creepage between contact and coil 3mm/4mm 25x103 1) Additional UL 508 ratings are available. Mechanical endurance Coil Data Coil voltage range Max. coil power Max. coil temperature Coil insulation system according UL 10x106 ops. 6 to 110VDC 110% of nominal 155C Class F Coil operating ranges shown above are for 1W coils. 02-2014, Rev. 0214 www.te.com (c) 2014 Tyco Electronics Corporation, a TE Connectivity Ltd. company. Catalog and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Catalog and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Catalog product data, `Definitions' section, application notes and all specifications are subject to change. 1 General Purpose High Power PCB Relays Potter & Brumfield Power PCB Relay T9E (Continued) Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature DC coil -40C to 85C / 105C Category of environmental protection IEC 61810 RTII - flux proof (T9EV) RTIII - wash tight (T9ES) Vibration resistance (functional) 1.5mm, 10-55 Hz Shock resistance (functional) 10g for 11msec Shock resistance (destructive) 100g Other Data (Continued) Terminal type PCB-tht and PCB-tht + quick connect Weight 26g mounting code 1 33g mounting codes 2 and 5 Resistance to soldering heat THT IEC 60068-2-20 260C Packaging/unit tray/50 pcs., box/250 pcs. Dimensions PCB version PCB/quick connect version 27,4 MAX. 32,5 MAX. 32,5 MAX. 27,4 MAX. S0290-A S0289-A +,41 3,3 -,25 Terminal assignment Bottom view on pins 1 form A 1 form C PCB layout Bottom view on pins PCB version PCB/quick connect version Only necessary terminals are present on single throw models. Consequently, some holes will be unnecessary for single throw models. Only necessary terminals are present on single throw models. Consequently, some holes will be unnecessary for single throw models. S0261-AH S0261-AA 2 02-2014, Rev. 0214 www.te.com (c) 2014 Tyco Electronics Corporation, a TE Connectivity Ltd. company. Catalog and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Catalog and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Catalog product data, `Definitions' section, application notes and all specifications are subject to change. General Purpose High Power PCB Relays Potter & Brumfield Power PCB Relay T9E (Continued) Product code structure Typical product code T9E S 1 D 1 4 -24 Type T9E Power PCB relay T9E Enclosure S Wash-tight plastic case with knock off nib V Flux-proof plastic case Contact arrangement 1 1 form A (1 NO) 5 1 form C (1 CO) Coil Input D DC voltage, 1W L DC voltage, 900mW Mounting and termination 1 PCB mounting; PCB terminals for coil and contacts 2 PCB mounting; PCB terminals for coil and contacts; 6.35mm (.250in) QC for contacts Contact material 4 AgSnOInO 2 AgCdO - optionally available. Contact Product Engineering for availbaility and ratings. Coil voltage Coil code: please refer to coil versions table Product Code T9ES1L14-18 T9ES1D14-12 T9ES1D14-24 T9ES1D12-12 T9ES1D24-12 T9ES1D22-12 T9ES5D14-12 T9ES5D12-24 T9ES5D24-12 T9EV1D14-22 Enclosure Mounting Contact material Contacts Coil version wash tight PCB terminals AgSnOInO 1 form A, 1 NO 900mW 1W PCB + quick connect PCB terminals flux proof 02-2014, Rev. 0214 www.te.com (c) 2014 Tyco Electronics Corporation, a TE Connectivity Ltd. company. PCB + quick connect PCB terminals AgCdO AgSnOInO AgCdO AgSnOInO AgCdO AgSnOInO Catalog and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. 1 form C, 1 CO 1 form A, 1 NO Catalog and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Coil voltage Part number 18VDC 12VDC 24VDC 12VDC 12VDC 12VDC 12VDC 24VDC 12VDC 22VDC 1-2027234-8 2027234-2 2027234-7 1-2027234-0 2027234-8 1-2027243-3 2027234-6 2027234-4 2027234-9 2027234-5 Catalog product data, `Definitions' section, application notes and all specifications are subject to change. 3