1
02-2014, Rev. 0214
www.te.com
© 2014 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
Potter & Brumfield
General Purpose
High Power PCB Relays
Power PCB Relay T9E
Coil Data (continued)
Coil versions, DC coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10% W
Code D (1W) coil
6 6 4.5 0.6 36 1
9 9 6.75 0.9 81 1
12 12 9 1.2 144 1
18 18 13.5 1.8 324 1
22 22 16.5 2.2 484 1
24 24 18 2.4 576 1
48 48 36.2 4.8 2304 1
110 110 82.5 11 12100 1
Code L (900mW) coil
6 6 4.5 0.6 40 .9
12 12 9 1.2 155 .9
18 18 13.5 1.8 380 .9
24 24 18 2.4 660 .9
All figures are given for coil without preenergization, at ambient temperature +23°C.
Insulation Data
Initial dielectric strength
between open contacts 1500Vrms
between contact and coil 2500Vrms
Initial surge withstand voltage
between contact and coil 6kV (1.2μs/50μs impulse wave)
Initial insulation resistance
between insulated elements 1x109Ω
Clearance/creepage
between contact and coil ≥3mm/4mm
Coil operating ranges shown above are for 1W coils.
n 1 pole 30A, 1 formA(NO) or 1 formC(CO)
n High breaking capacity 7500 VA
n PCB and PCB/quick connect terminals
n UL class F insulation as standard
n Ambient temperature up to 105°C
n Plastic materials according to IEC60335-1
Typical applications
HVAC, power supplies, domestic appliances, measurement and control.
Approvals
VDE 40027903, UL E58304
Technical data of approved types on request.
Contact Data
Contact arrangement
1 form A (NO) 1 form C (CO)
Rated voltage 240VAC
Max. switching voltage 250VAC (VDE); 300VAC (UL)
Rated current 30A 20A/10A
Limiting continuous current 30A
Breaking capacity max. 7500VA 5000/2500VA
Contact material AgSnOInO (AgCdO optional)
Min. recommended contact load 1A, 5VDC or 12VAC
Initial contact resistance 75 mΩ at 1A at 5VDC or 12VAC
Frequency of operation, with/without load 6/120min-1
Operate/release time max., including bounce 15/15ms
Contact ratings
Type Contact Load Cycles
IEC 61810
AgSnOInO, 1W coil
1 NO 30A, 250VAC, cosj=1, 60°C 20x103
1 NO 20A, 250VAC, cosj=1, 85°C 100x103
2 NO 20A, 250VAC, cosj=1, 70°C 100x103
1, 2 CO 20A / 10A, 250VAC, cosj=1, 60°C 20x103
AgSnOInO, 900mW coil
1 NO 17A, 250VAC, cosj=1, 105°C 100x103
1 NO 20A, 250VAC, cosj=1, 85°C 100x103
EN 60730-1
AgSnOInO, 1W coil
1 NO 12(12)A, 240VAC, 60°C 100x103
UL 508 1)
AgSnOInO, 1W coil
1, 2 NO 30A, 240VAC, general purpose, 25°C 100x103
AgSnOInO, 900mW coil
1, 2 NO TV-8, 125VAC, 25°C 25x103
1) Additional UL 508 ratings are available.
Mechanical endurance 10x106 ops.
Coil Data
Coil voltage range 6 to 110VDC
Max. coil power 110% of nominal
Max. coil temperature 155°C
Coil insulation system according UL Class F