BROWN BOVERI BROWN, BOVERI & CIE AKTIENGESELLSCHAFT MANNHEIM Geschaftsbereich Halbleiter und Stromrichter Telefon (06206) 503-1, Telex 04-65 727 Postfach 200, D-6840 Lampertheim Brochure Order No. D HS 60624/3 E +iviCc Silicon Avalanche Power Rectifiers Series 32 37 Amperes Average Data and Diagrams are related to 60 cycles Catalog Number equivalent to Peak Polarity ___- JEDEC Reverse Standard Reverse Numbers Voltage $3210 R3210 1N249A, 1N249B, 1N249C, 1N1302, 1N1435, 1N2155, 100 1N3209 $3220 R3220 1N250A, 1N250B, 1N250C, 1N1304, 1N1436, 1N2156, 200 1N3210 $3230 R3230 1N1306, 1N2157, 1N3211 300 $3240 R3240 1N1437, 1N2158, 1N3212 400 $3260 R3260 1N1438, 1N2160 600 $3280 R3280 800 $32100 R32100 1000 Electrical Characteristics Maximum Average Forward Current, Single-Phase, Half-Wave DC Rating at 123C Case Temperature 37 Amps. Maximum Surge Current (one cycle of 60 Hz sine wave) 600 Amps. Peak Forward Voltage at 90 Amperes (25C Case Temperature) 1.2 Volts Max. Rated Peak Reverse Voltage Range 100 to 1000 Volts Maximum Peak Reverse Current at 150C Case Temperature 2.0 MA Maximum Operating Frequency 10,000 Hz Maximum |?t (less than 8 ms) 1500 Amps.? Sec. Reverse Power Rating 0.60 Joule Mechanical Characteristics Base Steel stud and base with a %"-28 UNF-2A thread for through mounting on a heat sink. Nickel plating of base produces low contact resistance and prevents corrosion Heacer Glass to metal construction Hermetically sealed to base Weight Approximately 0.5 ounce (14 grams) Mouriting Position May be mounted in any position Mouriting Torque 75 inch pounds maximum Dimensions tn accordance with JEDEC DO-5 Outline Thermal Characteristics Storage Temperature Range 65C to +200C Operating Temperature Range Junction -65C to +190C impedance (C/W), Junction to Case 1,50 Max. Environmental Specifications Tests in accordance with (MIL-E-1) Tests include: Temperature cycling, Salt spray, Vibration, Shock, Moisture resistance and Temperature soak.F v Standard, cathode on stud E | A Reverse, anode on stud + Dim. Inches Millimeters Notes Minimum Maximum Minimum Maximum D A 1 B 44 47 WA 11.89 c 67 69 16.94 17.46 2 D 1.00 25.40 E 15 18 3.81 4.69 F 28 7.14 Note 1: Va"-28 UNF-2A Note 2: Across Flats Figure 1 Figure 2 Figure 3 Load current versus case temperature Maximum power dissipation versus forward Maximum forward characteristics current 50 1000 PTT] | 460 | 360 *60 *180 #360 > 150 D D 140 40 poe NU 180 oe a 1207 | | *360 Conduction 120 @ angle 110 S 100 o 30 100 & a ; 90 | g 5 80 5 190C / | 25C > 20 IN Ks 70 Oo 5 Rw g 2 > = 60 & e4 : - = 10 2 @ 00 5 N\ 3 40 w e Aw S o = 10 | | 30 rahe 3 O 2 a! v 2 20 tic a @ 5 Conduction = 2 = 10 angle S Po i 9 1 110 120 130 140 150 160 170 180 190 200 0 20 40 60 80 100 120 5 10 20 30 Diode Case TemperatureC Forward CurrentAverage Amperes Instantaneous Forward Voltage-- Volts Figure 4 Figure 5 Transient thermal impedance 2.1 a a a on oO Jct. to Case Therm. Imp. C/Watts oOo WwW OD 004 01 0.1 1.0 10.0 Time in Seconds Maximum surge current at rated load 700 600 500 400 300 200 100 0 Peak Forward Current Amps 100 Time in Cycles Klassifikations-Nr. 0701-541 HS 1960 E - 1/2 (8.76.3) B 705 - 3765 PE Printed in the Federal Republic of Germany