Aluminum Electrolytic Capacitors/ HD Radial Lead Type Series: HD Type: A Features Endurance : 105 C 1000 h to 2000 h Minaturize, Higher Capacitance : 1 Size Miniturized Product of Current A-NHG RoHS directive compliant Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance -55 C to +105 C 10 V.DC to 50 V.DC 2.2 F to 22000 F 20 % (120 Hz/+20 C) I < 0.01 CV or 3 (A) After 2 minutes (Which is greater) DC Leakage Current tan d Please see the attached standard products list After following life test with DC voltage and +105 C2 C ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage), When the capacitors are restored to 20 C, the capacitors shall meet the limits specified below. Duration : 05 to 08=1000 hours, 010 to 018=2000 hours Endurance Capacitance change 20 % of initial measured value tan d < 200 % of initial specified value DC leakage current < initial specified value After storage for 1000 hours at +105 C2 C with no voltage applied and then being stabilized at +20 C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Shelf Life Frequency correction factor for ripple current W.V.(V.DC) Frequency (Hz) Cap. (F) 2.2 10 to 50 to 60 120 1k 10 k 100 k 33 0.75 1.00 1.55 1.80 2.00 47 to 470 0.80 1.00 1.35 1.50 1.50 1000 to 22000 0.85 1.00 1.10 1.15 1.15 Dimensions in mm (not to scale) fd0.05 (Unit : mm) Sleeve Pressure relief 06.3 08 010 + L= 14 min. 0D0.5 3 min. F0.5 - 0D0.5 = L16 : L1.5 L20 : L2.0 Body Dia. 0D Lead Dia. 0d Lead space F 5 0.5 2.0 6.3 0.5 2.5 8 0.6 3.5 10 0.6 5.0 12.5 0.6 5.0 16 0.8 7.5 18 0.8 7.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 May. 2014 - EEE-104 - Aluminum Electrolytic Capacitors/ HD Standard Products Endurance : 105 C 05 to 08=1000 h, 010 to 018=2000 h Case size Specification Lead Length Ripple tan EndurLead d Lead Space Cap. W.V. ance Dia. (20 %) Dia. Length Current (120 Hz) (120 Hz) Straight Taping Taping B H (+105 C) (+20 C) (V) (F) (mm) (mm) (mA r.m.s.) (hours) (mm) (mm) (mm) (mm) 10 16 25 35 330 6.3 470 8 1000 10 2200 10 4700 12.5 6800 12.5 10000 16 15000 16 22000 18 100 5 220 6.3 330 8 470 8 3300 12.5 4700 12.5 6800 16 8200 16 10000 16 15000 18 47 5 68 5 100 6.3 220 8 330 8 470 10 1000 10 2200 12.5 3300 12.5 4700 16 5600 16 6800 16 10000 18 47 5 100 6.3 220 8 330 10 470 10 680 10 2200 12.5 3300 16 4700 16 6800 18 11.2 200 11.5 250 12.5 460 16 760 20 1260 25 1570 25 1890 31.5 2180 35.5 2400 11 110 11.2 180 11.5 260 11.5 310 20 1170 25 1480 25 1780 25 1780 31.5 2060 35.5 2210 11 91 11 91 11.2 130 11.5 230 11.5 310 12.5 380 16 680 20 1090 25 1400 25 1750 25 1750 31.5 2040 35.5 2200 11 90 11.2 150 11.5 270 12.5 350 16 460 16 460 25 1260 25 1610 31.5 1910 35.5 2050 0.24 0.24 0.24 0.26 0.30 0.34 0.42 0.52 0.66 0.20 0.20 0.20 0.20 0.24 0.26 0.30 0.34 0.38 0.48 0.16 0.16 0.16 0.16 0.16 0.16 0.16 0.18 0.20 0.22 0.24 0.26 0.34 0.14 0.14 0.14 0.14 0.14 0.14 0.16 0.18 0.20 0.24 1000 1000 2000 2000 2000 2000 2000 2000 2000 1000 1000 1000 1000 2000 2000 2000 2000 2000 2000 1000 1000 1000 1000 1000 2000 2000 2000 2000 2000 2000 2000 2000 1000 1000 1000 2000 2000 2000 2000 2000 2000 2000 0.5 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.5 0.5 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 2.5 3.5 5.0 5.0 5.0 5.0 7.5 7.5 7.5 2.5 2.5 3.5 3.5 5.0 5.0 7.5 7.5 7.5 7.5 2.5 2.5 2.5 3.5 3.5 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 2.5 2.5 3.5 5.0 5.0 5.0 5.0 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 7.5 2.5 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 2.5 2.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 2.5 2.5 2.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 2.5 2.5 Min. Packaging Q'ty Part No. EEUHD1A331( ) EEUHD1A471( ) EEUHD1A102( ) EEUHD1A222( ) EEUHD1A472( ) EEUHD1A682( ) EEUHD1A103( ) EEUHD1A153 EEUHD1A223 EEUHD1C101( ) EEUHD1C221( ) EEUHD1C331( ) EEUHD1C471( ) EEUHD1C332( ) EEUHD1C472( ) EEUHD1C682( ) EEUHD1C822( ) EEUHD1C103 EEUHD1C153 EEUHD1E470( ) EEUHD1E680( ) EEUHD1E101( ) EEUHD1E221( ) EEUHD1E331( ) EEUHD1E471( ) EEUHD1E102( ) EEUHD1E222( ) EEUHD1E332( ) EEUHD1E472( ) EEUHD1E562( ) EEUHD1E682 EEUHD1E103 EEUHD1V470( ) EEUHD1V101( ) EEUHD1V221( ) EEUHD1V331( ) EEUHD1V471( ) EEUHD1V681( ) EEUHD1V222( ) EEUHD1V332( ) EEUHD1V472 EEUHD1V682 Straight Taping Leads (pcs) (pcs) 200 200 200 200 200 200 100 100 50 200 200 200 200 200 200 100 100 100 50 200 200 200 200 200 200 200 200 200 100 100 100 50 200 200 200 200 200 200 200 100 100 50 2000 1000 500 500 500 500 250 2000 2000 1000 1000 500 500 250 250 2000 2000 2000 1000 1000 500 500 500 500 250 250 2000 2000 1000 500 500 500 500 250 * When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, H=2.5 mm. * Please refer to the page of "Taping Dimensions". Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 May. 2014 - EEE-105 - Aluminum Electrolytic Capacitors/ HD Standard Products Endurance : 105 C 05 to 08=1000 h, 010 to 018=2000 h Case size Specification Lead Length Ripple tan EndurLead d Lead Space Cap. W.V. ance Dia. (20 %) Dia. Length Current (120 Hz) (120 Hz) Straight Taping Taping B H (+105 C) (+20 C) (V) (F) (mm) (mm) (mA r.m.s.) (hours) (mm) (mm) (mm) (mm) 0.1 50 5 11 1.1 0.12 1000 0.5 2.5 5.0 Min. Packaging Q'ty Part No. Straight Taping Leads (pcs) (pcs) 2.5 EEUHD1HR10( ) 200 2000 0.22 5 11 2.3 0.12 1000 0.5 2.5 5.0 2.5 EEUHD1HR22( ) 200 2000 0.33 5 11 3.5 0.12 1000 0.5 2.5 5.0 2.5 EEUHD1HR33( ) 200 2000 0.47 5 11 5 0.12 1000 0.5 2.5 5.0 2.5 EEUHD1HR47( ) 200 2000 1 5 11 10 0.12 1000 0.5 2.5 5.0 2.5 EEUHD1H1R0( ) 200 2000 2.2 5 11 18 0.12 1000 0.5 2.5 5.0 2.5 EEUHD1H2R2( ) 200 2000 3.3 5 11 22 0.12 1000 0.5 2.5 5.0 2.5 EEUHD1H3R3( ) 200 2000 4.7 5 11 26 0.12 1000 0.5 2.5 5.0 2.5 EEUHD1H4R7( ) 200 2000 10 5 11 39 0.12 1000 0.5 2.5 5.0 2.5 EEUHD1H100( ) 200 2000 22 5 11 65 0.12 1000 0.5 2.5 5.0 2.5 EEUHD1H220( ) 200 2000 33 5 11 47 6.3 11.2 90 0.12 1000 0.5 2.5 5.0 2.5 EEUHD1H330( ) 200 2000 110 0.12 1000 0.5 2.5 5.0 2.5 EEUHD1H470( ) 200 2000 2.5 68 6.3 11.2 110 0.12 1000 0.5 2.5 5.0 EEUHD1H680( ) 200 2000 100 8 11.5 180 0.12 1000 0.6 3.5 5.0 EEUHD1H101( ) 200 1000 220 10 12.5 300 0.12 2000 0.6 5.0 5.0 EEUHD1H221( ) 200 500 330 10 16 410 0.12 2000 0.6 5.0 5.0 EEUHD1H331( ) 200 500 470 10 20 530 0.12 2000 0.6 5.0 5.0 EEUHD1H471( ) 200 500 560 16 15 650 0.12 2000 0.8 7.5 7.5 EEUHD1H561S( ) 100 250 680 16 15 650 0.12 2000 0.8 7.5 7.5 EEUHD1H681S( ) 100 250 5.0 500 1000 12.5 25 950 0.12 2000 0.6 5.0 EEUHD1H102( ) 200 2200 16 31.5 1470 0.14 2000 0.8 7.5 EEUHD1H222 100 3300 18 35.5 1770 0.16 2000 0.8 7.5 EEUHD1H332 50 * When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, H=2.5 mm. * Please refer to the page of "Taping Dimensions". Please kindly accept last shipment : 31/Mar/2015 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 May. 2014 - EEE-106 - Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Panasonic: EEU-HD1H1R0 EEU-HD1H1R0B EEU-HD1HR10 EEU-HD1HR10B EEU-HD1HR22 EEU-HD1HR22B EEUHD1HR33 EEU-HD1HR33B EEU-HD1HR47 EEU-HD1HR47B